-
The Guesswork of Ordered Statistics Decoding: Complexity and Practical Design
Authors:
Chentao Yue,
Changyang She,
Branka Vucetic,
Yonghui Li
Abstract:
This paper investigates guesswork over ordered statistics and formulates the complexity of ordered statistics decoding (OSD) in binary additive white Gaussian noise (AWGN) channels. It first develops a new upper bound of guesswork for independent sequences, by applying the Holder's inequity to Hamming shell-based subspaces. This upper bound is then extended to the ordered statistics, by constructi…
▽ More
This paper investigates guesswork over ordered statistics and formulates the complexity of ordered statistics decoding (OSD) in binary additive white Gaussian noise (AWGN) channels. It first develops a new upper bound of guesswork for independent sequences, by applying the Holder's inequity to Hamming shell-based subspaces. This upper bound is then extended to the ordered statistics, by constructing the conditionally independent sequences within the ordered statistics sequences. We leverage the established bounds to formulate the best achievable decoding complexity of OSD that ensures no loss in error performance, where OSD stops immediately when the correct codeword estimate is found. We show that the average complexity of OSD at maximum decoding order can be accurately approximated by the modified Bessel function, which increases near-exponentially with code dimension. We also identify a complexity saturation threshold, where increasing the OSD decoding order beyond this threshold improves error performance without further raising decoding complexity. Finally, the paper presents insights on applying these findings to enhance the efficiency of practical decoder implementations.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Intelligent Mode-switching Framework for Teleoperation
Authors:
Burak Kizilkaya,
Changyang She,
Guodong Zhao,
Muhammad Ali Imran
Abstract:
Teleoperation can be very difficult due to limited perception, high communication latency, and limited degrees of freedom (DoFs) at the operator side. Autonomous teleoperation is proposed to overcome this difficulty by predicting user intentions and performing some parts of the task autonomously to decrease the demand on the operator and increase the task completion rate. However, decision-making…
▽ More
Teleoperation can be very difficult due to limited perception, high communication latency, and limited degrees of freedom (DoFs) at the operator side. Autonomous teleoperation is proposed to overcome this difficulty by predicting user intentions and performing some parts of the task autonomously to decrease the demand on the operator and increase the task completion rate. However, decision-making for mode-switching is generally assumed to be done by the operator, which brings an extra DoF to be controlled by the operator and introduces extra mental demand. On the other hand, the communication perspective is not investigated in the current literature, although communication imperfections and resource limitations are the main bottlenecks for teleoperation. In this study, we propose an intelligent mode-switching framework by jointly considering mode-switching and communication systems. User intention recognition is done at the operator side. Based on user intention recognition, a deep reinforcement learning (DRL) agent is trained and deployed at the operator side to seamlessly switch between autonomous and teleoperation modes. A real-world data set is collected from our teleoperation testbed to train both user intention recognition and DRL algorithms. Our results show that the proposed framework can achieve up to 50% communication load reduction with improved task completion probability.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Hybrid-Task Meta-Learning: A Graph Neural Network Approach for Scalable and Transferable Bandwidth Allocation
Authors:
Xin Hao,
Changyang She,
Phee Lep Yeoh,
Yuhong Liu,
Branka Vucetic,
Yonghui Li
Abstract:
In this paper, we develop a deep learning-based bandwidth allocation policy that is: 1) scalable with the number of users and 2) transferable to different communication scenarios, such as non-stationary wireless channels, different quality-of-service (QoS) requirements, and dynamically available resources. To support scalability, the bandwidth allocation policy is represented by a graph neural net…
▽ More
In this paper, we develop a deep learning-based bandwidth allocation policy that is: 1) scalable with the number of users and 2) transferable to different communication scenarios, such as non-stationary wireless channels, different quality-of-service (QoS) requirements, and dynamically available resources. To support scalability, the bandwidth allocation policy is represented by a graph neural network (GNN), with which the number of training parameters does not change with the number of users. To enable the generalization of the GNN, we develop a hybrid-task meta-learning (HML) algorithm that trains the initial parameters of the GNN with different communication scenarios during meta-training. Next, during meta-testing, a few samples are used to fine-tune the GNN with unseen communication scenarios. Simulation results demonstrate that our HML approach can improve the initial performance by $8.79\%$, and sampling efficiency by $73\%$, compared with existing benchmarks. After fine-tuning, our near-optimal GNN-based policy can achieve close to the same reward with much lower inference complexity compared to the optimal policy obtained using iterative optimization.
△ Less
Submitted 17 March, 2024; v1 submitted 22 December, 2023;
originally announced January 2024.
-
Graph Neural Network-Based Bandwidth Allocation for Secure Wireless Communications
Authors:
Xin Hao,
Phee Lep Yeoh,
Yuhong Liu,
Changyang She,
Branka Vucetic,
Yonghui Li
Abstract:
This paper designs a graph neural network (GNN) to improve bandwidth allocations for multiple legitimate wireless users transmitting to a base station in the presence of an eavesdropper. To improve the privacy and prevent eavesdrop** attacks, we propose a user scheduling algorithm to schedule users satisfying an instantaneous minimum secrecy rate constraint. Based on this, we optimize the bandwi…
▽ More
This paper designs a graph neural network (GNN) to improve bandwidth allocations for multiple legitimate wireless users transmitting to a base station in the presence of an eavesdropper. To improve the privacy and prevent eavesdrop** attacks, we propose a user scheduling algorithm to schedule users satisfying an instantaneous minimum secrecy rate constraint. Based on this, we optimize the bandwidth allocations with three algorithms namely iterative search (IvS), GNN-based supervised learning (GNN-SL), and GNN-based unsupervised learning (GNN-USL). We present a computational complexity analysis which shows that GNN-SL and GNN-USL can be more efficient compared to IvS which is limited by the bandwidth block size. Numerical simulation results highlight that our proposed GNN-based resource allocations can achieve a comparable sum secrecy rate compared to IvS with significantly lower computational complexity. Furthermore, we observe that the GNN approach is more robust to uncertainties in the eavesdropper's channel state information, especially compared with the best channel allocation scheme.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Secure Deep Reinforcement Learning for Dynamic Resource Allocation in Wireless MEC Networks
Authors:
Xin Hao,
Phee Lep Yeoh,
Changyang She,
Branka Vucetic,
Yonghui Li
Abstract:
This paper proposes a blockchain-secured deep reinforcement learning (BC-DRL) optimization framework for {data management and} resource allocation in decentralized {wireless mobile edge computing (MEC)} networks. In our framework, {we design a low-latency reputation-based proof-of-stake (RPoS) consensus protocol to select highly reliable blockchain-enabled BSs to securely store MEC user requests a…
▽ More
This paper proposes a blockchain-secured deep reinforcement learning (BC-DRL) optimization framework for {data management and} resource allocation in decentralized {wireless mobile edge computing (MEC)} networks. In our framework, {we design a low-latency reputation-based proof-of-stake (RPoS) consensus protocol to select highly reliable blockchain-enabled BSs to securely store MEC user requests and prevent data tampering attacks.} {We formulate the MEC resource allocation optimization as a constrained Markov decision process that balances minimum processing latency and denial-of-service (DoS) probability}. {We use the MEC aggregated features as the DRL input to significantly reduce the high-dimensionality input of the remaining service processing time for individual MEC requests. Our designed constrained DRL effectively attains the optimal resource allocations that are adapted to the dynamic DoS requirements. We provide extensive simulation results and analysis to} validate that our BC-DRL framework achieves higher security, reliability, and resource utilization efficiency than benchmark blockchain consensus protocols and {MEC} resource allocation algorithms.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Task-Oriented Cross-System Design for Timely and Accurate Modeling in the Metaverse
Authors:
Zhen Meng,
Kan Chen,
Yufeng Diao,
Changyang She,
Guodong Zhao,
Muhammad Ali Imran,
Branka Vucetic
Abstract:
In this paper, we establish a task-oriented cross-system design framework to minimize the required packet rate for timely and accurate modeling of a real-world robotic arm in the Metaverse, where sensing, communication, prediction, control, and rendering are considered. To optimize a scheduling policy and prediction horizons, we design a Constraint Proximal Policy Optimization(C-PPO) algorithm by…
▽ More
In this paper, we establish a task-oriented cross-system design framework to minimize the required packet rate for timely and accurate modeling of a real-world robotic arm in the Metaverse, where sensing, communication, prediction, control, and rendering are considered. To optimize a scheduling policy and prediction horizons, we design a Constraint Proximal Policy Optimization(C-PPO) algorithm by integrating domain knowledge from relevant systems into the advanced reinforcement learning algorithm, Proximal Policy Optimization(PPO). Specifically, the Jacobian matrix for analyzing the motion of the robotic arm is included in the state of the C-PPO algorithm, and the Conditional Value-at-Risk(CVaR) of the state-value function characterizing the long-term modeling error is adopted in the constraint. Besides, the policy is represented by a two-branch neural network determining the scheduling policy and the prediction horizons, respectively. To evaluate our algorithm, we build a prototype including a real-world robotic arm and its digital model in the Metaverse. The experimental results indicate that domain knowledge helps to reduce the convergence time and the required packet rate by up to 50%, and the cross-system design framework outperforms a baseline framework in terms of the required packet rate and the tail distribution of the modeling error.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Task-Oriented Metaverse Design in the 6G Era
Authors:
Zhen Meng,
Changyang She,
Guodong Zhao,
Muhammad A. Imran,
Mischa Dohler,
Yonghui Li,
Branka Vucetic
Abstract:
As an emerging concept, the Metaverse has the potential to revolutionize the social interaction in the post-pandemic era by establishing a digital world for online education, remote healthcare, immersive business, intelligent transportation, and advanced manufacturing. The goal is ambitious, yet the methodologies and technologies to achieve the full vision of the Metaverse remain unclear. In this…
▽ More
As an emerging concept, the Metaverse has the potential to revolutionize the social interaction in the post-pandemic era by establishing a digital world for online education, remote healthcare, immersive business, intelligent transportation, and advanced manufacturing. The goal is ambitious, yet the methodologies and technologies to achieve the full vision of the Metaverse remain unclear. In this paper, we first introduce the three infrastructure pillars that lay the foundation of the Metaverse, i.e., human-computer interfaces, sensing and communication systems, and network architectures. Then, we depict the roadmap towards the Metaverse that consists of four stages with different applications. To support diverse applications in the Metaverse, we put forward a novel design methodology: task-oriented design, and further review the challenges and the potential solutions. In the case study, we develop a prototype to illustrate how to synchronize a real-world device and its digital model in the Metaverse by task-oriented design, where a deep reinforcement learning algorithm is adopted to minimize the required communication throughput by optimizing the sampling and prediction systems subject to a synchronization error constraint.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Task-Oriented Prediction and Communication Co-Design for Haptic Communications
Authors:
Burak Kizilkaya,
Changyang She,
Guodong Zhao,
Muhammad Ali Imran
Abstract:
Prediction has recently been considered as a promising approach to meet low-latency and high-reliability requirements in long-distance haptic communications. However, most of the existing methods did not take features of tasks and the relationship between prediction and communication into account. In this paper, we propose a task-oriented prediction and communication co-design framework, where the…
▽ More
Prediction has recently been considered as a promising approach to meet low-latency and high-reliability requirements in long-distance haptic communications. However, most of the existing methods did not take features of tasks and the relationship between prediction and communication into account. In this paper, we propose a task-oriented prediction and communication co-design framework, where the reliability of the system depends on prediction errors and packet losses in communications. The goal is to minimize the required radio resources subject to the low-latency and high-reliability requirements of various tasks. Specifically, we consider the just noticeable difference (JND) as a performance metric for the haptic communication system. We collect experiment data from a real-world teleoperation testbed and use time-series generative adversarial networks (TimeGAN) to generate a large amount of synthetic data. This allows us to obtain the relationship between the JND threshold, prediction horizon, and the overall reliability including communication reliability and prediction reliability. We take 5G New Radio as an example to demonstrate the proposed framework and optimize bandwidth allocation and data rates of devices. Our numerical and experimental results show that the proposed framework can reduce wireless resource consumption up to 77.80% compared with a task-agnostic benchmark.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
A Scalable Graph Neural Network Decoder for Short Block Codes
Authors:
Kou Tian,
Chentao Yue,
Changyang She,
Yonghui Li,
Branka Vucetic
Abstract:
In this work, we propose a novel decoding algorithm for short block codes based on an edge-weighted graph neural network (EW-GNN). The EW-GNN decoder operates on the Tanner graph with an iterative message-passing structure, which algorithmically aligns with the conventional belief propagation (BP) decoding method. In each iteration, the "weight" on the message passed along each edge is obtained fr…
▽ More
In this work, we propose a novel decoding algorithm for short block codes based on an edge-weighted graph neural network (EW-GNN). The EW-GNN decoder operates on the Tanner graph with an iterative message-passing structure, which algorithmically aligns with the conventional belief propagation (BP) decoding method. In each iteration, the "weight" on the message passed along each edge is obtained from a fully connected neural network that has the reliability information from nodes/edges as its input. Compared to existing deep-learning-based decoding schemes, the EW-GNN decoder is characterised by its scalability, meaning that 1) the number of trainable parameters is independent of the codeword length, and 2) an EW-GNN decoder trained with shorter/simple codes can be directly used for longer/sophisticated codes of different code rates. Furthermore, simulation results show that the EW-GNN decoder outperforms the BP and deep-learning-based BP methods from the literature in terms of the decoding error rate.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Sampling, Communication, and Prediction Co-Design for Synchronizing the Real-World Device and Digital Model in Metaverse
Authors:
Zhen Meng,
Changyang She,
Guodong Zhao,
Daniele De Martini
Abstract:
The metaverse has the potential to revolutionize the next generation of the Internet by supporting highly interactive services with the help of Mixed Reality (MR) technologies; still, to provide a satisfactory experience for users, the synchronization between the physical world and its digital models is crucial. This work proposes a sampling, communication and prediction co-design framework to min…
▽ More
The metaverse has the potential to revolutionize the next generation of the Internet by supporting highly interactive services with the help of Mixed Reality (MR) technologies; still, to provide a satisfactory experience for users, the synchronization between the physical world and its digital models is crucial. This work proposes a sampling, communication and prediction co-design framework to minimize the communication load subject to a constraint on tracking the Mean Squared Error (MSE) between a real-world device and its digital model in the metaverse. To optimize the sampling rate and the prediction horizon, we exploit expert knowledge and develop a constrained Deep Reinforcement Learning (DRL) algorithm, named Knowledge-assisted Constrained Twin-Delayed Deep Deterministic (KC-TD3) policy gradient algorithm. We validate our framework on a prototype composed of a real-world robotic arm and its digital model. Compared with existing approaches: (1) When the tracking error constraint is stringent (MSE=0.002 degrees), our policy degenerates into the policy in the sampling-communication co-design framework. (2) When the tracking error constraint is mild (MSE=0.007 degrees), our policy degenerates into the policy in the prediction-communication co-design framework. (3) Our framework achieves a better trade-off between the average MSE and the average communication load compared with a communication system without sampling and prediction. For example, the average communication load can be reduced up to 87% when the track error constraint is 0.002 degrees. (4) Our policy outperforms the benchmark with the static sampling rate and prediction horizon optimized by exhaustive search, in terms of the tail probability of the tracking error. Furthermore, with the assistance of expert knowledge, the proposed algorithm KC-TD3 achieves better convergence time, stability, and final policy performance.
△ Less
Submitted 31 July, 2022;
originally announced August 2022.
-
Interference-Limited Ultra-Reliable and Low-Latency Communications: Graph Neural Networks or Stochastic Geometry?
Authors:
Yuhong Liu,
Changyang She,
Yi Zhong,
Wibowo Hardjawana,
Fu-Chun Zheng,
Branka Vucetic
Abstract:
In this paper, we aim to improve the Quality-of-Service (QoS) of Ultra-Reliability and Low-Latency Communications (URLLC) in interference-limited wireless networks. To obtain time diversity within the channel coherence time, we first put forward a random repetition scheme that randomizes the interference power. Then, we optimize the number of reserved slots and the number of repetitions for each p…
▽ More
In this paper, we aim to improve the Quality-of-Service (QoS) of Ultra-Reliability and Low-Latency Communications (URLLC) in interference-limited wireless networks. To obtain time diversity within the channel coherence time, we first put forward a random repetition scheme that randomizes the interference power. Then, we optimize the number of reserved slots and the number of repetitions for each packet to minimize the QoS violation probability, defined as the percentage of users that cannot achieve URLLC. We build a cascaded Random Edge Graph Neural Network (REGNN) to represent the repetition scheme and develop a model-free unsupervised learning method to train it. We analyze the QoS violation probability using stochastic geometry in a symmetric scenario and apply a model-based Exhaustive Search (ES) method to find the optimal solution. Simulation results show that in the symmetric scenario, the QoS violation probabilities achieved by the model-free learning method and the model-based ES method are nearly the same. In more general scenarios, the cascaded REGNN generalizes very well in wireless networks with different scales, network topologies, cell densities, and frequency reuse factors. It outperforms the model-based ES method in the presence of the model mismatch.
△ Less
Submitted 18 July, 2022; v1 submitted 11 July, 2022;
originally announced July 2022.
-
A Bayesian Receiver with Improved Complexity-Reliability Trade-off in Massive MIMO Systems
Authors:
Alva Kosasih,
Vera Miloslavskaya,
Wibowo Hardjawana,
Changyang She,
Chao-Kai Wen,
Branka Vucetic
Abstract:
The stringent requirements on reliability and processing delay in the fifth-generation ($5$G) cellular networks introduce considerable challenges in the design of massive multiple-input-multiple-output (M-MIMO) receivers. The two main components of an M-MIMO receiver are a detector and a decoder. To improve the trade-off between reliability and complexity, a Bayesian concept has been considered as…
▽ More
The stringent requirements on reliability and processing delay in the fifth-generation ($5$G) cellular networks introduce considerable challenges in the design of massive multiple-input-multiple-output (M-MIMO) receivers. The two main components of an M-MIMO receiver are a detector and a decoder. To improve the trade-off between reliability and complexity, a Bayesian concept has been considered as a promising approach that enhances classical detectors, e.g. minimum-mean-square-error detector. This work proposes an iterative M-MIMO detector based on a Bayesian framework, a parallel interference cancellation scheme, and a decision statistics combining concept. We then develop a high performance M-MIMO receiver, integrating the proposed detector with a low complexity sequential decoding for polar codes. Simulation results of the proposed detector show a significant performance gain compared to other low complexity detectors. Furthermore, the proposed M-MIMO receiver with sequential decoding ensures one order magnitude lower complexity compared to a receiver with stack successive cancellation decoding for polar codes from the 5G New Radio standard.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Machine Learning for Massive Industrial Internet of Things
Authors:
Hui Zhou,
Changyang She,
Yansha Deng,
Mischa Dohler,
Arumugam Nallanathan
Abstract:
Industrial Internet of Things (IIoT) revolutionizes the future manufacturing facilities by integrating the Internet of Things technologies into industrial settings. With the deployment of massive IIoT devices, it is difficult for the wireless network to support the ubiquitous connections with diverse quality-of-service (QoS) requirements. Although machine learning is regarded as a powerful data-dr…
▽ More
Industrial Internet of Things (IIoT) revolutionizes the future manufacturing facilities by integrating the Internet of Things technologies into industrial settings. With the deployment of massive IIoT devices, it is difficult for the wireless network to support the ubiquitous connections with diverse quality-of-service (QoS) requirements. Although machine learning is regarded as a powerful data-driven tool to optimize wireless network, how to apply machine learning to deal with the massive IIoT problems with unique characteristics remains unsolved. In this paper, we first summarize the QoS requirements of the typical massive non-critical and critical IIoT use cases. We then identify unique characteristics in the massive IIoT scenario, and the corresponding machine learning solutions with its limitations and potential research directions. We further present the existing machine learning solutions for individual layer and cross-layer problems in massive IIoT. Last but not the least, we present a case study of massive access problem based on deep neural network and deep reinforcement learning techniques, respectively, to validate the effectiveness of machine learning in massive IIoT scenario.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Knowledge-Assisted Deep Reinforcement Learning in 5G Scheduler Design: From Theoretical Framework to Implementation
Authors:
Zhouyou Gu,
Changyang She,
Wibowo Hardjawana,
Simon Lumb,
David McKechnie,
Todd Essery,
Branka Vucetic
Abstract:
In this paper, we develop a knowledge-assisted deep reinforcement learning (DRL) algorithm to design wireless schedulers in the fifth-generation (5G) cellular networks with time-sensitive traffic. Since the scheduling policy is a deterministic map** from channel and queue states to scheduling actions, it can be optimized by using deep deterministic policy gradient (DDPG). We show that a straight…
▽ More
In this paper, we develop a knowledge-assisted deep reinforcement learning (DRL) algorithm to design wireless schedulers in the fifth-generation (5G) cellular networks with time-sensitive traffic. Since the scheduling policy is a deterministic map** from channel and queue states to scheduling actions, it can be optimized by using deep deterministic policy gradient (DDPG). We show that a straightforward implementation of DDPG converges slowly, has a poor quality-of-service (QoS) performance, and cannot be implemented in real-world 5G systems, which are non-stationary in general. To address these issues, we propose a theoretical DRL framework, where theoretical models from wireless communications are used to formulate a Markov decision process in DRL. To reduce the convergence time and improve the QoS of each user, we design a knowledge-assisted DDPG (K-DDPG) that exploits expert knowledge of the scheduler design problem, such as the knowledge of the QoS, the target scheduling policy, and the importance of each training sample, determined by the approximation error of the value function and the number of packet losses. Furthermore, we develop an architecture for online training and inference, where K-DDPG initializes the scheduler off-line and then fine-tunes the scheduler online to handle the mismatch between off-line simulations and non-stationary real-world systems. Simulation results show that our approach reduces the convergence time of DDPG significantly and achieves better QoS than existing schedulers (reducing 30% ~ 50% packet losses). Experimental results show that with off-line initialization, our approach achieves better initial QoS than random initialization and the online fine-tuning converges in few minutes.
△ Less
Submitted 3 February, 2021; v1 submitted 17 September, 2020;
originally announced September 2020.
-
A Tutorial on Ultra-Reliable and Low-Latency Communications in 6G: Integrating Domain Knowledge into Deep Learning
Authors:
Changyang She,
Chengjian Sun,
Zhouyou Gu,
Yonghui Li,
Chenyang Yang,
H. Vincent Poor,
Branka Vucetic
Abstract:
As one of the key communication scenarios in the 5th and also the 6th generation (6G) of mobile communication networks, ultra-reliable and low-latency communications (URLLC) will be central for the development of various emerging mission-critical applications. State-of-the-art mobile communication systems do not fulfill the end-to-end delay and overall reliability requirements of URLLC. In particu…
▽ More
As one of the key communication scenarios in the 5th and also the 6th generation (6G) of mobile communication networks, ultra-reliable and low-latency communications (URLLC) will be central for the development of various emerging mission-critical applications. State-of-the-art mobile communication systems do not fulfill the end-to-end delay and overall reliability requirements of URLLC. In particular, a holistic framework that takes into account latency, reliability, availability, scalability, and decision making under uncertainty is lacking. Driven by recent breakthroughs in deep neural networks, deep learning algorithms have been considered as promising ways of develo** enabling technologies for URLLC in future 6G networks. This tutorial illustrates how domain knowledge (models, analytical tools, and optimization frameworks) of communications and networking can be integrated into different kinds of deep learning algorithms for URLLC. We first provide some background of URLLC and review promising network architectures and deep learning frameworks for 6G. To better illustrate how to improve learning algorithms with domain knowledge, we revisit model-based analytical tools and cross-layer optimization frameworks for URLLC. Following that, we examine the potential of applying supervised/unsupervised deep learning and deep reinforcement learning in URLLC and summarize related open problems. Finally, we provide simulation and experimental results to validate the effectiveness of different learning algorithms and discuss future directions.
△ Less
Submitted 20 January, 2021; v1 submitted 13 September, 2020;
originally announced September 2020.
-
Unsupervised Deep Learning for Optimizing Wireless Systems with Instantaneous and Statistic Constraints
Authors:
Chengjian Sun,
Changyang She,
Chenyang Yang
Abstract:
Deep neural networks (DNNs) have been introduced for designing wireless policies by approximating the map**s from environmental parameters to solutions of optimization problems. Considering that labeled training samples are hard to obtain, unsupervised deep learning has been proposed to solve functional optimization problems with statistical constraints recently. However, most existing problems…
▽ More
Deep neural networks (DNNs) have been introduced for designing wireless policies by approximating the map**s from environmental parameters to solutions of optimization problems. Considering that labeled training samples are hard to obtain, unsupervised deep learning has been proposed to solve functional optimization problems with statistical constraints recently. However, most existing problems in wireless communications are variable optimizations, and many problems are with instantaneous constraints. In this paper, we establish a unified framework of using unsupervised deep learning to solve both kinds of problems with both instantaneous and statistic constraints. For a constrained variable optimization, we first convert it into an equivalent functional optimization problem with instantaneous constraints. Then, to ensure the instantaneous constraints in the functional optimization problems, we use DNN to approximate the Lagrange multiplier functions, which is trained together with a DNN to approximate the policy. We take two resource allocation problems in ultra-reliable and low-latency communications as examples to illustrate how to guarantee the complex and stringent quality-of-service (QoS) constraints with the framework. Simulation results show that unsupervised learning outperforms supervised learning in terms of QoS violation probability and approximation accuracy of the optimal policy, and can converge rapidly with pre-training.
△ Less
Submitted 11 August, 2020; v1 submitted 30 May, 2020;
originally announced June 2020.
-
Deep Learning for Radio Resource Allocation with Diverse Quality-of-Service Requirements in 5G
Authors:
Rui Dong,
Changyang She,
Wibowo Hardjawana,
Yonghui Li,
Branka Vucetic
Abstract:
To accommodate diverse Quality-of-Service (QoS) requirements in the 5th generation cellular networks, base stations need real-time optimization of radio resources in time-varying network conditions. This brings high computing overheads and long processing delays. In this work, we develop a deep learning framework to approximate the optimal resource allocation policy that minimizes the total power…
▽ More
To accommodate diverse Quality-of-Service (QoS) requirements in the 5th generation cellular networks, base stations need real-time optimization of radio resources in time-varying network conditions. This brings high computing overheads and long processing delays. In this work, we develop a deep learning framework to approximate the optimal resource allocation policy that minimizes the total power consumption of a base station by optimizing bandwidth and transmit power allocation. We find that a fully-connected neural network (NN) cannot fully guarantee the QoS requirements due to the approximation errors and quantization errors of the numbers of subcarriers. To tackle this problem, we propose a cascaded structure of NNs, where the first NN approximates the optimal bandwidth allocation, and the second NN outputs the transmit power required to satisfy the QoS requirement with given bandwidth allocation. Considering that the distribution of wireless channels and the types of services in the wireless networks are non-stationary, we apply deep transfer learning to update NNs in non-stationary wireless networks. Simulation results validate that the cascaded NNs outperform the fully connected NN in terms of QoS guarantee. In addition, deep transfer learning can reduce the number of training samples required to train the NNs remarkably.
△ Less
Submitted 29 March, 2020;
originally announced April 2020.
-
Energy-Aware Offloading in Time-Sensitive Networks with Mobile Edge Computing
Authors:
Mingxiong Zhao,
Jun-Jie Yu,
Wen-Tao Li,
Di Liu,
Shaowen Yao,
Wei Feng,
Changyang She,
Tony Q. S. Quek
Abstract:
Mobile Edge Computing (MEC) enables rich services in close proximity to the end users to provide high quality of experience (QoE) and contributes to energy conservation compared with local computing, but results in increased communication latency. In this paper, we investigate how to jointly optimize task offloading and resource allocation to minimize the energy consumption in an orthogonal freque…
▽ More
Mobile Edge Computing (MEC) enables rich services in close proximity to the end users to provide high quality of experience (QoE) and contributes to energy conservation compared with local computing, but results in increased communication latency. In this paper, we investigate how to jointly optimize task offloading and resource allocation to minimize the energy consumption in an orthogonal frequency division multiple access-based MEC networks, where the time-sensitive tasks can be processed at both local users and MEC server via partial offloading. Since the optimization variables of the problem are strongly coupled, we first decompose the orignal problem into three subproblems named as offloading selection (PO ), transmission power optimization (PT ), and subcarriers and computing resource allocation (PS ), and then propose an iterative algorithm to deal with them in a sequence. To be specific, we derive the closed-form solution for PO , employ the equivalent parametric convex programming to cope with the objective function which is in the form of sum of ratios in PT , and deal with PS by an alternating way in the dual domain due to its NP-hardness. Simulation results demonstrate that the proposed algorithm outperforms the existing schemes.
△ Less
Submitted 28 March, 2020;
originally announced March 2020.
-
Deep Learning for Ultra-Reliable and Low-Latency Communications in 6G Networks
Authors:
Changyang She,
Rui Dong,
Zhouyou Gu,
Zhanwei Hou,
Yonghui Li,
Wibowo Hardjawana,
Chenyang Yang,
Lingyang Song,
Branka Vucetic
Abstract:
In the future 6th generation networks, ultra-reliable and low-latency communications (URLLC) will lay the foundation for emerging mission-critical applications that have stringent requirements on end-to-end delay and reliability. Existing works on URLLC are mainly based on theoretical models and assumptions. The model-based solutions provide useful insights, but cannot be directly implemented in p…
▽ More
In the future 6th generation networks, ultra-reliable and low-latency communications (URLLC) will lay the foundation for emerging mission-critical applications that have stringent requirements on end-to-end delay and reliability. Existing works on URLLC are mainly based on theoretical models and assumptions. The model-based solutions provide useful insights, but cannot be directly implemented in practice. In this article, we first summarize how to apply data-driven supervised deep learning and deep reinforcement learning in URLLC, and discuss some open problems of these methods. To address these open problems, we develop a multi-level architecture that enables device intelligence, edge intelligence, and cloud intelligence for URLLC. The basic idea is to merge theoretical models and real-world data in analyzing the latency and reliability and training deep neural networks (DNNs). Deep transfer learning is adopted in the architecture to fine-tune the pre-trained DNNs in non-stationary networks. Further considering that the computing capacity at each user and each mobile edge computing server is limited, federated learning is applied to improve the learning efficiency. Finally, we provide some experimental and simulation results and discuss some future directions.
△ Less
Submitted 22 February, 2020;
originally announced February 2020.
-
Computation Offloading for IoT in C-RAN: Optimization and Deep Learning
Authors:
Chandan Pradhan,
Ang Li,
Changyang She,
Yonghui Li,
Branka Vucetic
Abstract:
We consider computation offloading for Internet-of-things (IoT) applications in multiple-input-multiple-output (MIMO) cloud-radio-access-network (C-RAN). Due to the limited battery life and computational capability in the IoT devices (IoTDs), the computational tasks of the IoTDs are offloaded to a MIMO C-RAN, where a MIMO radio resource head (RRH) is connected to a baseband unit (BBU) through a ca…
▽ More
We consider computation offloading for Internet-of-things (IoT) applications in multiple-input-multiple-output (MIMO) cloud-radio-access-network (C-RAN). Due to the limited battery life and computational capability in the IoT devices (IoTDs), the computational tasks of the IoTDs are offloaded to a MIMO C-RAN, where a MIMO radio resource head (RRH) is connected to a baseband unit (BBU) through a capacity-limited fronthaul link, facilitated by the spatial filtering and uniform scalar quantization. We formulate a computation offloading optimization problem to minimize the total transmit power of the IoTDs while satisfying the latency requirement of the computational tasks, and find that the problem is non-convex. To obtain a feasible solution, firstly the spatial filtering matrix is locally optimized at the MIMO RRH. Subsequently, we leverage the alternating optimization framework for joint optimization on the residual variables at the BBU, where the baseband combiner is obtained in a closed-form, the resource allocation sub-problem is solved through successive inner convexification, and the number of quantization bits is obtained by a line-search method. As a low-complexity approach, we deploy a supervised deep learning method, which is trained with the solutions to our optimization algorithm. Numerical results validate the effectiveness of the proposed algorithm and the deep learning method.
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
Prediction and Communication Co-design for Ultra-Reliable and Low-Latency Communications
Authors:
Zhanwei Hou,
Changyang She,
Yonghui Li,
Zhuo Li,
Branka Vucetic
Abstract:
Ultra-reliable and low-latency communications (URLLC) are considered as one of three new application scenarios in the fifth generation cellular networks. In this work, we aim to reduce the user experienced delay through prediction and communication co-design, where each mobile device predicts its future states and sends them to a data center in advance. Since predictions are not error-free, we con…
▽ More
Ultra-reliable and low-latency communications (URLLC) are considered as one of three new application scenarios in the fifth generation cellular networks. In this work, we aim to reduce the user experienced delay through prediction and communication co-design, where each mobile device predicts its future states and sends them to a data center in advance. Since predictions are not error-free, we consider prediction errors and packet losses in communications when evaluating the reliability of the system. Then, we formulate an optimization problem that maximizes the number of URLLC services supported by the system by optimizing time and frequency resources and the prediction horizon. Simulation results verify the effectiveness of the proposed method, and show that the tradeoff between user experienced delay and reliability can be improved significantly via prediction and communication co-design. Furthermore, we carried out an experiment on the remote control in a virtual factory, and validated our concept on prediction and communication co-design with the practical mobility data generated by a real tactile device.
△ Less
Submitted 5 September, 2019;
originally announced September 2019.
-
Cross-layer Design for Mission-Critical IoT in Mobile Edge Computing Systems
Authors:
Changyang She,
Yifan Duan,
Guodong Zhao,
Tony Q. S. Quek,
Yonghui Li,
Branka Vucetic
Abstract:
In this work, we propose a cross-layer framework for optimizing user association, packet offloading rates, and bandwidth allocation for Mission-Critical Internet-of-Things (MC-IoT) services with short packets in Mobile Edge Computing (MEC) systems, where enhanced Mobile BroadBand (eMBB) services with long packets are considered as background services. To reduce communication delay, the 5th generat…
▽ More
In this work, we propose a cross-layer framework for optimizing user association, packet offloading rates, and bandwidth allocation for Mission-Critical Internet-of-Things (MC-IoT) services with short packets in Mobile Edge Computing (MEC) systems, where enhanced Mobile BroadBand (eMBB) services with long packets are considered as background services. To reduce communication delay, the 5th generation new radio is adopted in radio access networks. To avoid long queueing delay for short packets from MC-IoT, Processor-Sharing (PS) servers are deployed at MEC systems, where the service rate of the server is equally allocated to all the packets in the buffer. We derive the distribution of latency experienced by short packets in closed-form, and minimize the overall packet loss probability subject to the end-to-end delay requirement. To solve the non-convex optimization problem, we propose an algorithm that converges to a near optimal solution when the throughput of eMBB services is much higher than MC-IoT services, and extend it into more general scenarios. Furthermore, we derive the optimal solutions in two asymptotic cases: communication or computing is the bottleneck of reliability. Simulation and numerical results validate our analysis and show that the PS server outperforms first-come-first-serve servers.
△ Less
Submitted 26 June, 2019;
originally announced July 2019.
-
Deep Learning for Hybrid 5G Services in Mobile Edge Computing Systems: Learn from a Digital Twin
Authors:
Rui Dong,
Changyang She,
Wibowo Hardjawana,
Yonghui Li,
Branka Vucetic
Abstract:
In this work, we consider a mobile edge computing system with both ultra-reliable and low-latency communications services and delay tolerant services. We aim to minimize the normalized energy consumption, defined as the energy consumption per bit, by optimizing user association, resource allocation, and offloading probabilities subject to the quality-of-service requirements. The user association i…
▽ More
In this work, we consider a mobile edge computing system with both ultra-reliable and low-latency communications services and delay tolerant services. We aim to minimize the normalized energy consumption, defined as the energy consumption per bit, by optimizing user association, resource allocation, and offloading probabilities subject to the quality-of-service requirements. The user association is managed by the mobility management entity (MME), while resource allocation and offloading probabilities are determined by each access point (AP). We propose a deep learning (DL) architecture, where a digital twin of the real network environment is used to train the DL algorithm off-line at a central server. From the pre-trained deep neural network (DNN), the MME can obtain user association scheme in a real-time manner. Considering that real networks are not static, the digital twin monitors the variation of real networks and updates the DNN accordingly. For a given user association scheme, we propose an optimization algorithm to find the optimal resource allocation and offloading probabilities at each AP. Simulation results show that our method can achieve lower normalized energy consumption with less computation complexity compared with an existing method and approach to the performance of the global optimal solution.
△ Less
Submitted 30 June, 2019;
originally announced July 2019.
-
Towards Ultra-Reliable Low-Latency Communications: Typical Scenarios, Possible Solutions, and Open Issues
Authors:
Daquan Feng,
Changyang She,
Kai Ying,
Lifeng Lai,
Zhanwei Hou,
Tony Q. S. Quek,
Yonghui Li,
Branka Vucetic
Abstract:
Ultra-reliable low-latency communications (URLLC) has been considered as one of the three new application scenarios in the \emph{5th Generation} (5G) \emph {New Radio} (NR), where the physical layer design aspects have been specified. With the 5G NR, we can guarantee the reliability and latency in radio access networks. However, for communication scenarios where the transmission involves both radi…
▽ More
Ultra-reliable low-latency communications (URLLC) has been considered as one of the three new application scenarios in the \emph{5th Generation} (5G) \emph {New Radio} (NR), where the physical layer design aspects have been specified. With the 5G NR, we can guarantee the reliability and latency in radio access networks. However, for communication scenarios where the transmission involves both radio access and wide area core networks, the delay in radio access networks only contributes to part of the \emph{end-to-end} (E2E) delay. In this paper, we outline the delay components and packet loss probabilities in typical communication scenarios of URLLC, and formulate the constraints on E2E delay and overall packet loss probability. Then, we summarize possible solutions in the physical layer, the link layer, the network layer, and the cross-layer design, respectively. Finally, we discuss the open issues in prediction and communication co-design for URLLC in wide area large scale networks.
△ Less
Submitted 9 March, 2019;
originally announced March 2019.
-
Improving Network Availability of Ultra-Reliable and Low-Latency Communications with Multi-Connectivity
Authors:
Changyang She,
Zhengchuan Chen,
Chenyang Yang,
Tony Q. S. Quek,
Yonghui Li,
Branka Vucetic
Abstract:
Ultra-reliable and low-latency communications (URLLC) have stringent requirements on quality-of-service and network availability. Due to path loss and shadowing, it is very challenging to guarantee the stringent requirements of URLLC with satisfactory communication range. In this paper, we first provide a quantitative definition of network availability in the short blocklength regime: the probabil…
▽ More
Ultra-reliable and low-latency communications (URLLC) have stringent requirements on quality-of-service and network availability. Due to path loss and shadowing, it is very challenging to guarantee the stringent requirements of URLLC with satisfactory communication range. In this paper, we first provide a quantitative definition of network availability in the short blocklength regime: the probability that the reliability and latency requirements can be satisfied when the blocklength of channel codes is short. Then, we establish a framework to maximize available range, defined as the maximal communication distance subject to the network availability requirement, by exploiting multi-connectivity. The basic idea is using both device-to-device (D2D) and cellular links to transmit each packet. The practical setup with correlated shadowing between D2D and cellular links is considered. Besides, since processing delay for decoding packets cannot be ignored in URLLC, its impacts on the available range are studied. By comparing the available ranges of different transmission modes, we obtained some useful insights on how to choose transmission modes. Simulation and numerical results validate our analysis, and show that multi-connectivity can improve the available ranges of D2D and cellular links remarkably.
△ Less
Submitted 17 June, 2018;
originally announced June 2018.
-
Joint Uplink and Downlink Resource Configuration for Ultra-reliable and Low-latency Communications
Authors:
Changyang She,
Chenyang Yang,
Tony Q. S. Quek
Abstract:
Supporting ultra-reliable and low-latency communications (URLLC) is one of the major goals for the fifth-generation cellular networks. Since spectrum usage efficiency is always a concern, and large bandwidth is required for ensuring stringent quality-of-service (QoS), we minimize the total bandwidth under the QoS constraints of URLLC. We first propose a packet delivery mechanism for URLLC. To redu…
▽ More
Supporting ultra-reliable and low-latency communications (URLLC) is one of the major goals for the fifth-generation cellular networks. Since spectrum usage efficiency is always a concern, and large bandwidth is required for ensuring stringent quality-of-service (QoS), we minimize the total bandwidth under the QoS constraints of URLLC. We first propose a packet delivery mechanism for URLLC. To reduce the required bandwidth for ensuring queueing delay, we consider a statistical multiplexing queueing mode, where the packets to be sent to different devices are waiting in one queue at the base station, and broadcast mode is adopted in downlink transmission. In this way, downlink bandwidth is shared among packets of multiple devices. In uplink transmission, different subchannels are allocated to different devices to avoid strong interference. Then, we jointly optimize uplink and downlink bandwidth configuration and delay components to minimize the total bandwidth required to guarantee the overall packet loss and end-to-end delay, which includes uplink and downlink transmission delays, queueing delay and backhaul delay. We propose a two-step method to find the optimal solution. Simulation and numerical results validate our analysis and show remarkable performance gain by jointly optimizing uplink and downlink configuration.
△ Less
Submitted 3 January, 2018;
originally announced January 2018.
-
Energy-Efficient Resource Allocation for Ultra-reliable and Low-latency Communications
Authors:
Chengjian Sun,
Changyang She,
Chenyang Yang
Abstract:
Ultra-reliable and low-latency communications (URLLC) is expected to be supported without compromising the resource usage efficiency. In this paper, we study how to maximize energy efficiency (EE) for URLLC under the stringent quality of service (QoS) requirement imposed on the end-to-end (E2E) delay and overall packet loss, where the E2E delay includes queueing delay and transmission delay, and t…
▽ More
Ultra-reliable and low-latency communications (URLLC) is expected to be supported without compromising the resource usage efficiency. In this paper, we study how to maximize energy efficiency (EE) for URLLC under the stringent quality of service (QoS) requirement imposed on the end-to-end (E2E) delay and overall packet loss, where the E2E delay includes queueing delay and transmission delay, and the overall packet loss consists of queueing delay violation, transmission error with finite blocklength channel codes, and proactive packet drop** in deep fading. Transmit power, bandwidth and number of active antennas are jointly optimized to maximize the system EE under the QoS constraints. Since the achievable rate with finite blocklength channel codes is not convex in radio resources, it is challenging to optimize resource allocation. By analyzing the properties of the optimization problem, the global optimal solution is obtained. Simulation and numerical results validate the analysis and show that the proposed policy can improve EE significantly compared with existing policy.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
Energy Efficient Resource Allocation for Hybrid Services with Future Channel Gains
Authors:
Changyang She,
Chenyang Yang
Abstract:
In this paper, we propose a framework to maximize energy efficiency (EE) of a system supporting real-time (RT) and non-real-time services by exploiting future average channel gains of mobile users, which change in the timescale of seconds and are reported predictable within a minute-long time window. To demonstrate the potential of improving EE by jointly optimizing resource allocation for both se…
▽ More
In this paper, we propose a framework to maximize energy efficiency (EE) of a system supporting real-time (RT) and non-real-time services by exploiting future average channel gains of mobile users, which change in the timescale of seconds and are reported predictable within a minute-long time window. To demonstrate the potential of improving EE by jointly optimizing resource allocation for both services by harnessing both future average channel gains and current instantaneous channel gains, we optimize a two-timescale policy with perfect prediction, by taking orthogonal frequency division multiple access system serving RT and video-on-demand (VoD) users as an example. Considering that fine-grained prediction for every user is with high cost, we propose a heuristic policy that only needs to predict the median of average channel gains of VoD users. Simulation results show that the optimal policy outperforms relevant counterparts, indicating the necessity of the joint optimization for both services and for two timescales. Besides, the heuristic policy performs closely to the optimal policy with perfect prediction while becomes superior with large prediction errors. This suggests that the EE gain over non-predictive policies can be captured with coarse-grained prediction.
△ Less
Submitted 24 July, 2019; v1 submitted 6 July, 2017;
originally announced July 2017.
-
Cross-layer Optimization for Ultra-reliable and Low-latency Radio Access Networks
Authors:
Changyang She,
Chenyang Yang,
Tony Q. S. Quek
Abstract:
In this paper, we propose a framework for cross-layer optimization to ensure ultra-high reliability and ultra-low latency in radio access networks, where both transmission delay and queueing delay are considered. With short transmission time, the blocklength of channel codes is finite, and the Shannon Capacity cannot be used to characterize the maximal achievable rate with given transmission error…
▽ More
In this paper, we propose a framework for cross-layer optimization to ensure ultra-high reliability and ultra-low latency in radio access networks, where both transmission delay and queueing delay are considered. With short transmission time, the blocklength of channel codes is finite, and the Shannon Capacity cannot be used to characterize the maximal achievable rate with given transmission error probability. With randomly arrived packets, some packets may violate the queueing delay. Moreover, since the queueing delay is shorter than the channel coherence time in typical scenarios, the required transmit power to guarantee the queueing delay and transmission error probability will become unbounded even with spatial diversity. To ensure the required quality-of-service (QoS) with finite transmit power, a proactive packet drop** mechanism is introduced. Then, the overall packet loss probability includes transmission error probability, queueing delay violation probability, and packet drop** probability. We optimize the packet drop** policy, power allocation policy, and bandwidth allocation policy to minimize the transmit power under the QoS constraint. The optimal solution is obtained, which depends on both channel and queue state information. Simulation and numerical results validate our analysis, and show that setting packet loss probabilities equal is a near optimal solution.
△ Less
Submitted 7 October, 2017; v1 submitted 28 March, 2017;
originally announced March 2017.
-
Uplink Transmission Design with Massive Machine Type Devices in Tactile Internet
Authors:
Changyang She,
Chenyang Yang,
Tony Q. S. Quek
Abstract:
In this work, we study how to design uplink transmission with massive machine type devices in tactile internet, where ultra-short delay and ultra-high reliability are required. To characterize the transmission reliability constraint, we employ a two-state transmission model based on the achievable rate with finite blocklength channel codes. If the channel gain exceeds a threshold, a short packet c…
▽ More
In this work, we study how to design uplink transmission with massive machine type devices in tactile internet, where ultra-short delay and ultra-high reliability are required. To characterize the transmission reliability constraint, we employ a two-state transmission model based on the achievable rate with finite blocklength channel codes. If the channel gain exceeds a threshold, a short packet can be transmitted with a small error probability; otherwise there is a packet loss. To exploit frequency diversity, we assign multiple subchannels to each active device, from which the device selects a subchannel with channel gain exceeding the threshold for transmission. To show the total bandwidth required to ensure the reliability, we optimize the number of subchannels and bandwidth of each subchannel and the threshold for each device to minimize the total bandwidth of the system with a given number of antennas at the base station. Numerical results show that with 1000 devices in one cell, the required bandwidth of the optimized policy is acceptable even for prevalent cellular systems. Furthermore, we show that by increasing antennas at the BS, frequency diversity becomes unnecessary, and the required bandwidth is reduced.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
Energy Efficient Design for Tactile Internet
Authors:
Changyang She,
Chenyang Yang
Abstract:
Ensuring the ultra-low end-to-end latency and ultrahigh reliability required by tactile internet is challenging. This is especially true when the stringent Quality-of-Service (QoS) requirement is expected to be satisfied not at the cost of significantly reducing spectral efficiency and energy efficiency (EE). In this paper, we study how to maximize the EE for tactile internet under the stringent Q…
▽ More
Ensuring the ultra-low end-to-end latency and ultrahigh reliability required by tactile internet is challenging. This is especially true when the stringent Quality-of-Service (QoS) requirement is expected to be satisfied not at the cost of significantly reducing spectral efficiency and energy efficiency (EE). In this paper, we study how to maximize the EE for tactile internet under the stringent QoS constraint, where both queueing delay and transmission delay are taken into account. We first validate that the upper bound of queueing delay violation probability derived from the effective bandwidth can be used to characterize the queueing delay violation probability in the short delay regime for Poisson arrival process. However, the upper bound is not tight for short delay, which leads to conservative designs and hence leads to wasting energy. To avoid this, we optimize resource allocation that depends on the queue state information and channel state information. Analytical results show that with a large number of transmit antennas the EE achieved by the proposed policy approaches to the EE limit achieved for infinite delay bound, which implies that the policy does not lead to any EE loss. Simulation and numerical results show that even for not-so-large number of antennas, the EE achieved by the proposed policy is still close to the EE limit.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
Cross-layer Transmission Design for Tactile Internet
Authors:
Changyang She,
Chenyang Yang,
Tony Q. S. Quek
Abstract:
To ensure the low end-to-end (E2E) delay for tactile internet, short frame structures will be used in 5G systems. As such, transmission errors with finite blocklength channel codes should be considered to guarantee the high reliability requirement. In this paper, we study cross-layer transmission optimization for tactile internet, where both queueing delay and transmission delay are accounted for…
▽ More
To ensure the low end-to-end (E2E) delay for tactile internet, short frame structures will be used in 5G systems. As such, transmission errors with finite blocklength channel codes should be considered to guarantee the high reliability requirement. In this paper, we study cross-layer transmission optimization for tactile internet, where both queueing delay and transmission delay are accounted for in the E2E delay, and different packet loss/error probabilities are considered to characterize the reliability. We show that the required transmit power becomes unbounded when the allowed maximal queueing delay is shorter than the channel coherence time. To satisfy quality-of-service requirement with finite transmit power, we introduce a proactive packet drop** mechanism, and optimize a queue state information and channel state information dependent transmission policy. Since the resource and policy for transmission and the packet drop** policy are related to the packet error probability, queueing delay violation probability, and packet drop** probability, we optimize the three probabilities and obtain the policies related to these probabilities. We start from single-user scenario and then extend our framework to the multi-user scenario. Simulation results show that the optimized three probabilities are in the same order of magnitude. Therefore, we have to take into account all these factors when we design systems for tactile internet applications.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
