-
Designing for Passengers' Information Needs on Fellow Travelers: A Comparison of Day and Night Rides in Shared Automated Vehicles
Authors:
Lukas A. Flohr,
Martina Schuß,
Dieter P. Wallach,
Antonio Krüger,
Andreas Riener
Abstract:
Shared automated mobility-on-demand promises efficient, sustainable, and flexible transportation. Nevertheless, security concerns, resilience, and their mutual influence - especially at night - will likely be the most critical barriers to public adoption since passengers have to share rides with strangers without a human driver on board. As related work points out that information about fellow tra…
▽ More
Shared automated mobility-on-demand promises efficient, sustainable, and flexible transportation. Nevertheless, security concerns, resilience, and their mutual influence - especially at night - will likely be the most critical barriers to public adoption since passengers have to share rides with strangers without a human driver on board. As related work points out that information about fellow travelers might mitigate passengers' concerns, we designed two user interface variants to investigate the role of this information in an exploratory within-subjects user study (N = 24). Participants experienced four automated day and night rides with varying personal information about co-passengers in a simulated environment. The results of the mixed-method study indicate that having information about other passengers (e.g., photo, gender, and name) positively affects user experience at night. In contrast, it is less necessary during the day. Considering participants' simultaneously raised privacy demands poses a substantial challenge for resilient system design.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Understanding Concurrent Transmissions: The Impact of Carrier Frequency Offset and RF Interference on Physical Layer Performance
Authors:
Michael Baddeley,
Carlo Alberto Boano,
Antonio Escobar-Molero,
Ye Liu,
Xiaoyuan Ma,
Victor Marot,
Usman Raza,
Kay Römer,
Markus Schuss,
Aleksandar Stanoev
Abstract:
The popularity of concurrent transmissions (CT) has soared after recent studies have shown their feasibility on the four physical layers specified by BLE 5, hence providing an alternative to the use of IEEE 802.15.4 for the design of reliable and efficient low-power wireless protocols. However, to date, the extent to which physical layer properties affect the performance of CT has not yet been inv…
▽ More
The popularity of concurrent transmissions (CT) has soared after recent studies have shown their feasibility on the four physical layers specified by BLE 5, hence providing an alternative to the use of IEEE 802.15.4 for the design of reliable and efficient low-power wireless protocols. However, to date, the extent to which physical layer properties affect the performance of CT has not yet been investigated in detail. This paper fills this gap and provides an extensive study on the impact of the physical layer on CT-based solutions using IEEE 802.15.4 and BLE 5. We first highlight through simulation how the impact of errors induced by relative carrier frequency offsets on the performance of CT highly depends on the choice of the underlying physical layer. We then confirm these observations experimentally on real hardware and with varying environmental conditions through an analysis of the bit error distribution across received packets, unveiling possible techniques to effectively handle these errors. We further study the performance of CT-based data collection and dissemination protocols in the presence of RF interference on a large-scale testbed, deriving insights on how the employed physical layer affects their dependability.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
OSF: An Open-Source Framework for Synchronous Flooding over Multiple Physical Layers
Authors:
Michael Baddeley,
Yevgen Gyl,
Markus Schuss,
Xiaoyuan Ma,
Carlo Alberto Boano
Abstract:
Flooding protocols based on concurrent transmissions are regarded as the most reliable way to collect or disseminate data across a multi-hop low-power wireless mesh network. Recent works have shown that such protocols are effective for narrowband communication not only over IEEE 802.15.4, but also over the BLE 5 physical layers (PHYs). However, to date, existing literature has only built synchrono…
▽ More
Flooding protocols based on concurrent transmissions are regarded as the most reliable way to collect or disseminate data across a multi-hop low-power wireless mesh network. Recent works have shown that such protocols are effective for narrowband communication not only over IEEE 802.15.4, but also over the BLE 5 physical layers (PHYs). However, to date, existing literature has only built synchronous flooding solutions on top of a single PHY, and there has been no attempt to leverage different PHYs at runtime to increase performance. This paper fills this gap and presents OSF, an open-source framework that enables the design of multi-PHY synchronous flooding solutions thanks to a novel radio driver and middle-ware architecture capable of dynamically switching the underlying physical layer. This allows exploitation of the specific benefits of each PHY (e.g., higher data-rate, increased robustness) on-demand during each flood, increasing performance. We tailor OSF to the off-the-shelf nRF52840 platform, and showcase its benefits by comparing single-PHY and multi-PHY synchronous flooding solutions on a real-world testbed.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
6TiSCH++ with Bluetooth 5 and Concurrent Transmissions
Authors:
Michael Baddeley,
Adnan Aijaz,
Usman Raza,
Aleksandar Stanoev,
Yichao **,
Markus Schuß,
Carlo Alberto Boano,
George Oikonomou
Abstract:
Targeting dependable communications for industrial Internet of Things applications, IETF 6TiSCH provides mechanisms for efficient scheduling, routing, and forwarding of IPv6 traffic across low-power mesh networks. Yet, despite an overwhelming body of literature covering both centralized and distributed scheduling schemes for 6TiSCH, an effective control solution for large-scale multi-hop mesh netw…
▽ More
Targeting dependable communications for industrial Internet of Things applications, IETF 6TiSCH provides mechanisms for efficient scheduling, routing, and forwarding of IPv6 traffic across low-power mesh networks. Yet, despite an overwhelming body of literature covering both centralized and distributed scheduling schemes for 6TiSCH, an effective control solution for large-scale multi-hop mesh networks remains an open challenge. This paper addresses this with a novel approach that eliminates much of the routing and link-layer overhead incurred by centralized schedulers, and provides a robust mechanism for data dissemination synchronization within 6TiSCH. Specifically, we leverage the physical layer (PHY) switching capabilities of modern low-power wireless platforms to build on recent work demonstrating the viability of Concurrent Transmission (CT)-based flooding protocols across the Bluetooth 5 (BT 5) PHYs. By switching the PHY and MAC layer at runtime, we inject a BT 5-based CT flood within a standard IEEE 802.15.4 TSCH slotframe, thereby providing a reliable, low-latency scheme for 6TiSCH control messaging. We present an analytical model and experimental evaluation showing how our solution not only exploits the BT 5 high data-rate PHY layers for rapid data dissemination, but can also provide reliable 6TiSCH association and synchronization even under external radio interference. We further discuss how the proposed technique can be used to address other open challenges within the standard.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
The Impact of the Physical Layer on the Performance of Concurrent Transmissions
Authors:
Michael Baddeley,
Carlo Alberto Boano,
Antonio Escobar-Molero,
Ye Liu,
Xiaoyuan Ma,
Usman Raza,
Kay Römer,
Markus Schuß,
Aleksandar Stanoev
Abstract:
The popularity of concurrent transmissions (CT) has soared after recent studies have shown their feasibility on the four physical layers specified by BLE 5, hence providing an alternative to the use of IEEE 802.15.4 for the design of reliable and efficient low-power wireless protocols. However, to date, the extent to which physical layer properties affect the performance of CT has not yet been inv…
▽ More
The popularity of concurrent transmissions (CT) has soared after recent studies have shown their feasibility on the four physical layers specified by BLE 5, hence providing an alternative to the use of IEEE 802.15.4 for the design of reliable and efficient low-power wireless protocols. However, to date, the extent to which physical layer properties affect the performance of CT has not yet been investigated in detail. This paper fills this gap and provides the first extensive study on the impact of the physical layer on CT-based solutions using IEEE 802.15.4 and BLE 5. We first highlight through simulation how the impact of errors induced by de-synchronization and beating on the performance of CT highly depends on the choice of the underlying physical layer. We then confirm these observations experimentally on real hardware through an analysis of the bit error distribution across received packets, unveiling possible techniques to effectively handle these errors. We further study the performance of CT-based flooding protocols in the presence of radio interference on a large-scale, and derive important insights on how the used physical layer affects their dependability.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.