-
Effect of Variable Physical Numerologies on Link-Level Performance of 5G NR V2X
Authors:
Donglin Wang,
Oneza Saraci,
Raja R. Sattiraju,
Qiuheng Zhou,
Hans D. Schotten
Abstract:
With technology and societal development, the 5th generation wireless communication (5G) contributes significantly to different societies like industries or academies. Vehicle-to-Everything (V2X) communication technology has been one of the leading services for 5G which has been applied in vehicles. It is used to exchange their status information with other traffic and traffic participants to incr…
▽ More
With technology and societal development, the 5th generation wireless communication (5G) contributes significantly to different societies like industries or academies. Vehicle-to-Everything (V2X) communication technology has been one of the leading services for 5G which has been applied in vehicles. It is used to exchange their status information with other traffic and traffic participants to increase traffic safety and efficiency. Cellular-V2X (C-V2X) is one of the emerging technologies to enable V2X communications. The first Long-Term Evolution (LTE) based C-V2X was released on the 3rd Generation Partnership Project (3GPP) standard. 3GPP is working towards the development of New Radio (NR) systems that it is called 5G NR V2X. One single numerology in LTE cannot satisfy most performance requirements because of the variety of deployment options and scenarios. For this reason, in order to meet the diverse requirements, the 5G NR Physical Layer (PHY) is designed to provide a highly flexible framework. Scalable Orthogonal Frequency-Division Multiplexing (OFDM) numerologies make flexibility possible. The term numerology refers to the PHY waveform parametrization and allows different Subcarrier Spacings (SCSs), symbols, and slot duration. This paper implements the Link-Level (LL) simulations of LTE C-V2X communication and 5G NR V2X communication where simulation results are used to compare similarities and differences between LTE and 5G NR. We detect the effect of variable PHY Numerologies of 5G NR on the LL performance of V2X. The simulation results show that the performance of 5G NR improved by using variable numerologies.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Machine Learning for QoS Prediction in Vehicular Communication: Challenges and Solution Approaches
Authors:
Alexandros Palaios,
Christian L. Vielhaus,
Daniel F. Külzer,
Cara Watermann,
Rodrigo Hernangomez,
Sanket Partani,
Philipp Geuer,
Anton Krause,
Raja Sattiraju,
Martin Kasparick,
Gerhard Fettweis,
Frank H. P. Fitzek,
Hans D. Schotten,
Slawomir Stanczak
Abstract:
As cellular networks evolve towards the 6th generation, machine learning is seen as a key enabling technology to improve the capabilities of the network. Machine learning provides a methodology for predictive systems, which can make networks become proactive. This proactive behavior of the network can be leveraged to sustain, for example, a specific quality of service requirement. With predictive…
▽ More
As cellular networks evolve towards the 6th generation, machine learning is seen as a key enabling technology to improve the capabilities of the network. Machine learning provides a methodology for predictive systems, which can make networks become proactive. This proactive behavior of the network can be leveraged to sustain, for example, a specific quality of service requirement. With predictive quality of service, a wide variety of new use cases, both safety- and entertainment-related, are emerging, especially in the automotive sector. Therefore, in this work, we consider maximum throughput prediction enhancing, for example, streaming or high-definition map** applications. We discuss the entire machine learning workflow highlighting less regarded aspects such as the detailed sampling procedures, the in-depth analysis of the dataset characteristics, the effects of splits in the provided results, and the data availability. Reliable machine learning models need to face a lot of challenges during their lifecycle. We highlight how confidence can be built on machine learning technologies by better understanding the underlying characteristics of the collected data. We discuss feature engineering and the effects of different splits for the training processes, showcasing that random splits might overestimate performance by more than twofold. Moreover, we investigate diverse sets of input features, where network information proved to be most effective, cutting the error by half. Part of our contribution is the validation of multiple machine learning models within diverse scenarios. We also use explainable AI to show that machine learning can learn underlying principles of wireless networks without being explicitly programmed. Our data is collected from a deployed network that was under full control of the measurement team and covered different vehicular scenarios and radio environments.
△ Less
Submitted 22 August, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Effect of Retransmissions on the Performance of C-V2X Communication for 5G
Authors:
Donglin Wang,
Raja R. Sattiraju,
Anjie Qiu,
Sanket Partani,
Hans D. Schotten
Abstract:
In recent years, the next generation of wireless communication (5G) plays a significant role in both industry and academy societies. Cellular Vehicle-to-Everything (C-V2X) communication technology has been one of the prominent services for 5G. For C-V2X transmission mode, there is a newly defined communication channel (sidelink) that can support direct C-V2X communication. Direct C-V2X communicati…
▽ More
In recent years, the next generation of wireless communication (5G) plays a significant role in both industry and academy societies. Cellular Vehicle-to-Everything (C-V2X) communication technology has been one of the prominent services for 5G. For C-V2X transmission mode, there is a newly defined communication channel (sidelink) that can support direct C-V2X communication. Direct C-V2X communication is a technology that allows vehicles to communicate and share safety-related information with other traffic participates directly without going through the cellular network. The C-V2X data packet will be delivered to all traffic Users (UE) in the proximity of the Transmitter (Tx). Some UEs might not successfully receive the data packets during one transmission but the sidelink Tx is not able to check whether the Receivers (Rxs) get the information or not due to the lack of feedback channel. For enabling the strict requirements in terms of reliability and latency for C-V2X communication, we propose and evaluate one retransmission scheme and retransmission with different traffic speed scheme. These schemes try to improve the reliability of the safety-related data by one blind retransmission without requiring feedback. Although this retransmission scheme is essential to C-V2X communication, the scheme has a limitation in the performance aspect because of its redundant retransmission. Since radio resources for CV2X communication are limited, we have to detect the effect of retransmission on the performance of the communication system. To the end, the simulator for evaluating the proposed schemes for the C-V2X communication has been implemented, and the performances of the different communication schemes are shown through the Packet Reception Ratio (PRR).
△ Less
Submitted 17 July, 2020;
originally announced July 2020.
-
Supervised Learning for Physical Layer based Message Authentication in URLLC scenarios
Authors:
Andreas Weinand,
Raja Sattiraju,
Michael Karrenbauer,
Hans D. Schotten
Abstract:
PHYSEC based message authentication can, as an alternative to conventional security schemes, be applied within \gls{urllc} scenarios in order to meet the requirement of secure user data transmissions in the sense of authenticity and integrity. In this work, we investigate the performance of supervised learning classifiers for discriminating legitimate transmitters from illegimate ones in such scen…
▽ More
PHYSEC based message authentication can, as an alternative to conventional security schemes, be applied within \gls{urllc} scenarios in order to meet the requirement of secure user data transmissions in the sense of authenticity and integrity. In this work, we investigate the performance of supervised learning classifiers for discriminating legitimate transmitters from illegimate ones in such scenarios. We further present our methodology of data collection using \gls{sdr} platforms and the data processing pipeline including e.g. necessary preprocessing steps. Finally, the performance of the considered supervised learning schemes under different side conditions is presented.
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Methodologies of Link-Level Simulator and System-Level Simulator for C-V2X Communication
Authors:
Wang Donglin,
Raja R. Sattiraju,
Qiu Anjie,
Sanket Partani,
Hans D. Schotten
Abstract:
At the time of the development, standardization, and further improvement are vital to the modern cellular systems such as the next generation wireless communication (5G). Simulations are essential to test and optimize algorithms and procedures prior to their implementation process of the equipment manufactures. In order to evaluate system performance at different levels, accurate simulations of si…
▽ More
At the time of the development, standardization, and further improvement are vital to the modern cellular systems such as the next generation wireless communication (5G). Simulations are essential to test and optimize algorithms and procedures prior to their implementation process of the equipment manufactures. In order to evaluate system performance at different levels, accurate simulations of simple setups, as well as simulations of more complex systems via abstracted models are necessary. In this work, two new simulators for the sidelink Cooperative-Vehicle-to-Everything (C-V2X) communication have been implemented and carried out on both the physical layer (Link-Level (LL)) and network layer (System-Level (SL)). Detailed methodologies of the LL and SL simulators for C-V2X communication have been illustrated. In the LL simulator, we get the map** curves of BLER and Signal-to-Noise-Ratio (SNR), which are used as a baseline for measuring the performance of the LL simulation. In addition, these map** curves are used as the important Link-to-System (L2S) interfaces. The SL simulator is utilized for measuring the performance of cell networking and simulating large networks comprising of multiple eNBs and UEs. Finally, the simulation results of both simulators for CV2X communication are presented, which shows that different objectives can be met by using LL or SL simulations types.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
Performances of C-V2X Communication on Highway under Varying Channel Propagation Models
Authors:
Donglin Wang,
Raja R. Sattiraju,
Hans D. Schotten
Abstract:
In recent decades, both the industry and the academy society are sparing no efforts to develop and standardize the Cellular-Vehicle-to-Everything (C-V2X) communication which is one of the prominent emerging services of the next generation of wireless network (5G). C-V2X communication is used for information exchange among the traffic participants with network-assisted which can reduce traffic acci…
▽ More
In recent decades, both the industry and the academy society are sparing no efforts to develop and standardize the Cellular-Vehicle-to-Everything (C-V2X) communication which is one of the prominent emerging services of the next generation of wireless network (5G). C-V2X communication is used for information exchange among the traffic participants with network-assisted which can reduce traffic accidents and improve traffic efficiency. And it is also the primary enabler for cooperative driving. But C-V2X communication has to meet different Quality of Service (QoS) requirements (e.g., ultra-high reliability (99.999%) and ultra-low latency).
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
System-Level Simulator of LTE Sidelink C-V2X Communication for 5G
Authors:
Donglin Wang,
Raja R. Sattiraju,
Andreas Weinand,
Hans D. Schotten
Abstract:
In recent years, Cellular-Vehicle-to-Everything (CV2X) has been an emerging area of interest attracting both the industry and academy societies to develop, which is also a prominent emerging service for the next generation of the cellular network (5G). In the time of the development, standardization, and further improvement of 5G, so simulations are essential to test and optimize algorithms and pr…
▽ More
In recent years, Cellular-Vehicle-to-Everything (CV2X) has been an emerging area of interest attracting both the industry and academy societies to develop, which is also a prominent emerging service for the next generation of the cellular network (5G). In the time of the development, standardization, and further improvement of 5G, so simulations are essential to test and optimize algorithms and procedures prior to their implementation process of the equipment manufactures. And CV2X communication is used for information exchange among the traffic participants with network-assisted which can reduce traffic accidents and improve traffic efficiency. Moreover, it is also the primary enabler for cooperative driving. But CV2X communication has to meet different Quality of Service (QoS) requirements (e.g., ultra-high reliability (99.999%) and ultra-low latency). Guaranteeing high-level reliability is a big challenge. In order to assess system performance, accurate simulations of simple setups, as well as simulations of more complex systems via abstracted models are necessary for the CV2X communication. For checking the performance of the C-V2X communication on a highway scenario, a system-level simulator has been implemented. And, this simulation has been carried out on the network (system-level) context. Finally, the analysis and the simulation results for the C-V2X communication are presented, which shows that different objectives can be met via system-level simulation.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Application of Machine Learning for Channel based Message Authentication in Mission Critical Machine Type Communication
Authors:
Andreas Weinand,
Michael Karrenbauer,
Raja Sattiraju,
Hans D. Schotten
Abstract:
The design of robust wireless communication systems for industrial applications such as closed loop control processes has been considered manifold recently. Additionally, the ongoing advances in the area of connected mobility have similar or even higher requirements regarding system reliability and availability. Beside unfulfilled reliability requirements, the availability of a system can further…
▽ More
The design of robust wireless communication systems for industrial applications such as closed loop control processes has been considered manifold recently. Additionally, the ongoing advances in the area of connected mobility have similar or even higher requirements regarding system reliability and availability. Beside unfulfilled reliability requirements, the availability of a system can further be reduced, if it is under attack in the sense of violation of information security goals such as data authenticity or integrity. In order to guarantee the safe operation of an application, a system has at least to be able to detect these attacks. Though there are numerous techniques in the sense of conventional cryptography in order to achieve that goal, these are not always suited for the requirements of the applications mentioned due to resource inefficiency. In the present work, we show how the goal of message authenticity based on physical layer security (PHYSEC) can be achieved. The main idea for such techniques is to exploit user specific characteristics of the wireless channel, especially in spatial domain. Additionally, we show the performance of our machine learning based approach and compare it with other existing approaches.
△ Less
Submitted 14 November, 2017;
originally announced November 2017.
-
Cyber-Automotive Simulation and Evaluation Platform for Vehicular Value Added Services
Authors:
Raja Sattiraju,
Pratip Chakraborty,
Hans D. Schotten,
Xiaohai Lin,
Daniel Görges
Abstract:
An easily moving and safe transportation is an indicator in any country in the world of economic growth and well-being. For the past 100 years, innovation within the automotive sector has brought major technological advances leading to safer, cleaner and more affordable vehicles. But for the most time since the inception of the moving assembly line for vehicle production by Henry Ford, the changes…
▽ More
An easily moving and safe transportation is an indicator in any country in the world of economic growth and well-being. For the past 100 years, innovation within the automotive sector has brought major technological advances leading to safer, cleaner and more affordable vehicles. But for the most time since the inception of the moving assembly line for vehicle production by Henry Ford, the changes have been incremental / evolutionary. Thanks to the new possibilities due to the IT / wireless revolution, the automotive industry appears to be on the cusp of revolutionary change with potential to dramatically reshape not just the competitive landscape but also the way we interact with vehicles, and indeed the future design of our roads and cities. Apart from connected personal mobility, vehicles are also envisioned to provide Value Added Services (VAS) such as autonomous driving via Vehicle-to-Vehicle (V2V) and Vehicle-to-infrastructure (V2I), electric load balancing via Vehicle-to-Grid (V2G) solutions, communication solutions using Visible Light Communications (VLC) etc. The development and evaluation of vehicular VAS requires a modular and scalable multidisciplinary simulation platform. In this paper we propose a novel simulation platform named Cyber-Automotive Simulation \& Evaluation Platform (CASEP). The purpose of CASEP is to evaluate and visualize the gains of various vehicular VAS with special emphasis on commercial vehicle VAS. The use cases are evaluated with respect to the mission-specific performance indicators, thereby providing usable metrics for optimization. The visualization platform is being developed using the UNITY 3D engine, thereby enabling intuitive interaction as in real physics-based games
△ Less
Submitted 30 October, 2017;
originally announced October 2017.