-
Sequential Monte Carlo applied to virtual flow meter calibration
Authors:
Anders T. Sandnes,
Bjarne Grimstad,
Odd Kolbjørnsen
Abstract:
Soft-sensors are gaining popularity due to their ability to provide estimates of key process variables with little intervention required on the asset and at a low cost. In oil and gas production, virtual flow metering (VFM) is a popular soft-sensor that attempts to estimate multiphase flow rates in real time. VFMs are based on models, and these models require calibration. The calibration is highly…
▽ More
Soft-sensors are gaining popularity due to their ability to provide estimates of key process variables with little intervention required on the asset and at a low cost. In oil and gas production, virtual flow metering (VFM) is a popular soft-sensor that attempts to estimate multiphase flow rates in real time. VFMs are based on models, and these models require calibration. The calibration is highly dependent on the application, both due to the great diversity of the models, and in the available measurements. The most accurate calibration is achieved by careful tuning of the VFM parameters to well tests, but this can be work intensive, and not all wells have frequent well test data available. This paper presents a calibration method based on the measurement provided by the production separator, and the assumption that the observed flow should be equal to the sum of flow rates from each individual well. This allows us to jointly calibrate the VFMs continuously. The method applies Sequential Monte Carlo (SMC) to infer a tuning factor and the flow composition for each well. The method is tested on a case with ten wells, using both synthetic and real data. The results are promising and the method is able to provide reasonable estimates of the parameters without relying on well tests. However, some challenges are identified and discussed, particularly related to the process noise and how to manage varying data quality.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Multi-task neural networks by learned contextual inputs
Authors:
Anders T. Sandnes,
Bjarne Grimstad,
Odd Kolbjørnsen
Abstract:
This paper explores learned-context neural networks. It is a multi-task learning architecture based on a fully shared neural network and an augmented input vector containing trainable task parameters. The architecture is interesting due to its powerful task adaption mechanism, which facilitates a low-dimensional task parameter space. Theoretically, we show that a scalar task parameter is sufficien…
▽ More
This paper explores learned-context neural networks. It is a multi-task learning architecture based on a fully shared neural network and an augmented input vector containing trainable task parameters. The architecture is interesting due to its powerful task adaption mechanism, which facilitates a low-dimensional task parameter space. Theoretically, we show that a scalar task parameter is sufficient for universal approximation of all tasks, which is not necessarily the case for more common architectures. Evidence towards the practicality of such a small task parameter space is given empirically. The task parameter space is found to be well-behaved, and simplifies workflows related to updating models as new data arrives, and training new tasks when the shared parameters are frozen. Additionally, the architecture displays robustness towards cases with few data points. The architecture's performance is compared to similar neural network architectures on ten datasets.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Multi-task learning for virtual flow metering
Authors:
Anders T. Sandnes,
Bjarne Grimstad,
Odd Kolbjørnsen
Abstract:
Virtual flow metering (VFM) is a cost-effective and non-intrusive technology for inferring multiphase flow rates in petroleum assets. Inferences about flow rates are fundamental to decision support systems that operators extensively rely on. Data-driven VFM, where mechanistic models are replaced with machine learning models, has recently gained attention due to its promise of lower maintenance cos…
▽ More
Virtual flow metering (VFM) is a cost-effective and non-intrusive technology for inferring multiphase flow rates in petroleum assets. Inferences about flow rates are fundamental to decision support systems that operators extensively rely on. Data-driven VFM, where mechanistic models are replaced with machine learning models, has recently gained attention due to its promise of lower maintenance costs. While excellent performances in small sample studies have been reported in the literature, there is still considerable doubt about the robustness of data-driven VFM. In this paper, we propose a new multi-task learning (MTL) architecture for data-driven VFM. Our method differs from previous methods in that it enables learning across oil and gas wells. We study the method by modeling 55 wells from four petroleum assets and compare the results with two single-task baseline models. Our findings show that MTL improves robustness over single-task methods, without sacrificing performance. MTL yields a 25-50% error reduction on average for the assets where single-task architectures are struggling.
△ Less
Submitted 10 September, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Bayesian Neural Networks for Virtual Flow Metering: An Empirical Study
Authors:
Bjarne Grimstad,
Mathilde Hotvedt,
Anders T. Sandnes,
Odd Kolbjørnsen,
Lars S. Imsland
Abstract:
Recent works have presented promising results from the application of machine learning (ML) to the modeling of flow rates in oil and gas wells. Encouraging results and advantageous properties of ML models, such as computationally cheap evaluation and ease of calibration to new data, have sparked optimism for the development of data-driven virtual flow meters (VFMs). Data-driven VFMs are developed…
▽ More
Recent works have presented promising results from the application of machine learning (ML) to the modeling of flow rates in oil and gas wells. Encouraging results and advantageous properties of ML models, such as computationally cheap evaluation and ease of calibration to new data, have sparked optimism for the development of data-driven virtual flow meters (VFMs). Data-driven VFMs are developed in the small data regime, where it is important to question the uncertainty and robustness of models. The modeling of uncertainty may help to build trust in models, which is a prerequisite for industrial applications. The contribution of this paper is the introduction of a probabilistic VFM based on Bayesian neural networks. Uncertainty in the model and measurements is described, and the paper shows how to perform approximate Bayesian inference using variational inference. The method is studied by modeling on a large and heterogeneous dataset, consisting of 60 wells across five different oil and gas assets. The predictive performance is analyzed on historical and future test data, where an average error of 4-6% and 8-13% is achieved for the 50% best performing models, respectively. Variational inference appears to provide more robust predictions than the reference approach on future data. Prediction performance and uncertainty calibration is explored in detail and discussed in light of four data challenges. The findings motivate the development of alternative strategies to improve the robustness of data-driven VFMs.
△ Less
Submitted 13 June, 2021; v1 submitted 2 February, 2021;
originally announced February 2021.
