Showing 1–9 of 9 results for author: Ramos-Munoz, J J

Harmonizing 3GPP and NFV description models to provide customized RAN slices in 5G networks

Authors: Oscar Adamuz-Hinojosa, Pablo Munoz, Jose Ordonez-Lucena, Juan J. Ramos-Munoz, Juan M. Lopez-Soler

Abstract: The standardization of Radio Access Network (RAN) in mobile networks has traditionally been led by 3GPP. However, the emergence of RAN slicing has introduced new aspects that fall outside 3GPP scope. Among them, network virtualization enables the particularization of multiple RAN behaviors over a common physical infrastructure. Using Virtualized Network Functions (VNFs) that comprise customized ra… ▽ More The standardization of Radio Access Network (RAN) in mobile networks has traditionally been led by 3GPP. However, the emergence of RAN slicing has introduced new aspects that fall outside 3GPP scope. Among them, network virtualization enables the particularization of multiple RAN behaviors over a common physical infrastructure. Using Virtualized Network Functions (VNFs) that comprise customized radio functionalities, each virtualized RAN, denominated RAN slice, could meet its specific requirements. Although 3GPP specifies the description model to manage RAN slices, it can neither particularize the behavior of a RAN slice nor leverage the NFV descriptors to define how its VNFs can accommodate its spatial and temporal traffic demands. In this article, we propose a description model that harmonizes 3GPP and ETSI-NFV viewpoints to manage RAN slices. The proposed model enables the translation of RAN slice requirements into customized virtualized radio functionalities defined through NFV descriptors. To clarify this proposal, we provide an example where three RAN slices with disruptive requirements are described following our solution. △ Less

Submitted 3 September, 2019; originally announced September 2019.

Comments: Article accepted in IEEE Vehicular Technology Magazine

Analytic Analysis of Narrowband IoT Coverage Enhancement Approaches

Authors: Pilar Andres-Maldonado, Pablo Ameigeiras, Jonathan Prados-Garzon, Juan J. Ramos-Munoz, Jorge Navarro-Ortiz, Juan M. Lopez-Soler

Abstract: The introduction of Narrowband Internet of Things (NB-IoT) as a cellular IoT technology aims to support massive Machine-Type Communications applications. These applications are characterized by massive connections from a large number of low-complexity and low-power devices. One of the goals of NB-IoT is to improve coverage extension beyond existing cellular technologies. In order to do that, NB-Io… ▽ More The introduction of Narrowband Internet of Things (NB-IoT) as a cellular IoT technology aims to support massive Machine-Type Communications applications. These applications are characterized by massive connections from a large number of low-complexity and low-power devices. One of the goals of NB-IoT is to improve coverage extension beyond existing cellular technologies. In order to do that, NB-IoT introduces transmission repetitions and different bandwidth allocation configurations in uplink. These new transmission approaches yield many transmission options in uplink. In this paper, we propose analytical expressions that describe the influence of these new approaches in the transmission. Our analysis is based on the Shannon theorem. The transmission is studied in terms of the required Signal to Noise Ratio, bandwidth utilization, and energy per transmitted bit. Additionally, we propose an uplink link adaptation algorithm that contemplates these new transmission approaches. The conducted evaluation summarizes the influence of these approaches. Furthermore, we present the resulting uplink link adaptation from our proposed algorithm swee** the device's coverage. △ Less

Submitted 20 March, 2019; v1 submitted 30 April, 2018; originally announced April 2018.

Comments: Accepted in the 2018 Global IoT Summit (GIoTS) conference

The Creation Phase in Network Slicing: From a Service Order to an Operative Network Slice

Authors: Jose Ordonez-Lucena, Oscar Adamuz-Hinojosa, Pablo Ameigeiras, Pablo Muñoz, Juan J. Ramos-Muñoz, Jesús Folgueira Chavarria, Diego Lopez

Abstract: Network slicing is considered a key mechanism to serve the multitude of tenants (e.g. vertical industries) targeted by forthcoming 5G systems in a flexible and cost-efficient manner. In this paper, we present a SDN/NFV architecture with multi-tenancy support. This architecture enables a network slice provider to deploy network slice instances for multiple tenants on-the-fly, and simultaneously pro… ▽ More Network slicing is considered a key mechanism to serve the multitude of tenants (e.g. vertical industries) targeted by forthcoming 5G systems in a flexible and cost-efficient manner. In this paper, we present a SDN/NFV architecture with multi-tenancy support. This architecture enables a network slice provider to deploy network slice instances for multiple tenants on-the-fly, and simultaneously provision them with isolation guarantees. Following the Network Slice as-a-Service delivery model, a tenant may access a Service Catalog, selecting the slice that best fits its needs and ordering its deployment. This work provides a detailed view on the stages that a network slice provider must follow to deploy the ordered network slice instance, accommodating it into a multi-domain infrastructure, and putting it operative for tenant's consumption. These stages address critical issues identified in the literature, including (i) the map** from high-level service requirements to network functions and infrastructure requirements, (ii) the admission control, and (iii) the specific information a network slice descriptor should have. With the proposed architecture and the recommended set of stages, network slice providers can deploy (and later operate) slice instances with great agility, flexibility, and full automation. △ Less

Submitted 25 April, 2018; originally announced April 2018.

Comments: This article has been accepted for publication in the European Conference on Networks and Communications (EuCNC), 2018

Automated Network Service Scaling in NFV: Concepts, Mechanisms and Scaling Workflow

Authors: Oscar Adamuz-Hinojosa, Jose Ordonez-Lucena, Pablo Ameigeiras, Juan J. Ramos-Munoz, Diego Lopez, Jesus Folgueira

Abstract: Next-generation systems are anticipated to be digital platforms supporting innovative services with rapidly changing traffic patterns. To cope with this dynamicity in a cost-efficient manner, operators need advanced service management capabilities such as those provided by NFV. NFV enables operators to scale network services with higher granularity and agility than today. For this end, automation… ▽ More Next-generation systems are anticipated to be digital platforms supporting innovative services with rapidly changing traffic patterns. To cope with this dynamicity in a cost-efficient manner, operators need advanced service management capabilities such as those provided by NFV. NFV enables operators to scale network services with higher granularity and agility than today. For this end, automation is key. In search of this automation, the European Telecommunications Standards Institute (ETSI) has defined a reference NFV framework that make use of model-driven templates called Network Service Descriptors (NSDs) to operate network services through their lifecycle. For the scaling operation, an NSD defines a discrete set of instantiation levels among which a network service instance can be resized throughout its lifecycle. Thus, the design of these levels is key for ensuring an effective scaling. In this article, we provide an overview of the automation of the network service scaling operation in NFV, addressing the options and boundaries introduced by ETSI normative specifications. We start by providing a description of the NSD structure, focusing on how instantiation levels are constructed. For illustrative purposes, we propose an NSD for a representative NS. This NSD includes different instantiation levels that enable different ways to automatically scale this NS. Then, we show the different scaling procedures the NFV framework has available, and how it may automate their triggering. Finally, we propose an ETSI-compliant workflow to describe in detail a representative scaling procedure. This workflow clarifies the interactions and information exchanges between the functional blocks in the NFV framework when performing the scaling operation. △ Less

Submitted 15 June, 2018; v1 submitted 24 April, 2018; originally announced April 2018.

Comments: This work has been accepted for publication in the IEEE Communications Magazine

Optimized LTE Data Transmission Procedures for IoT: Device Side Energy Consumption Analysis

Authors: Pilar Andres-Maldonado, Pablo Ameigeiras, Jonathan Prados-Garzon, Juan J. Ramos-Munoz, Juan M. Lopez-Soler

Abstract: The efficient deployment of Internet of Things (IoT) over cellular networks, such as Long Term Evolution (LTE) or the next generation 5G, entails several challenges. For massive IoT, reducing the energy consumption on the device side becomes essential. One of the main characteristics of massive IoT is small data transmissions. To improve the support of them, the 3GPP has included two novel optimiz… ▽ More The efficient deployment of Internet of Things (IoT) over cellular networks, such as Long Term Evolution (LTE) or the next generation 5G, entails several challenges. For massive IoT, reducing the energy consumption on the device side becomes essential. One of the main characteristics of massive IoT is small data transmissions. To improve the support of them, the 3GPP has included two novel optimizations in LTE: one of them based on the Control Plane (CP), and the other on the User Plane (UP). In this paper, we analyze the average energy consumption per data packet using these two optimizations compared to conventional LTE Service Request procedure. We propose an analytical model to calculate the energy consumption for each procedure based on a Markov chain. In the considered scenario, for large and small Inter-Arrival Times (IATs), the results of the three procedures are similar. While for medium IATs CP reduces the energy consumption per packet up to 87% due to its connection release optimization. △ Less

Submitted 17 July, 2017; v1 submitted 17 April, 2017; originally announced April 2017.

Network Slicing for 5G with SDN/NFV: Concepts, Architectures and Challenges

Authors: Jose Ordonez-Lucena, Pablo Ameigeiras, Diego Lopez, Juan J. Ramos-Munoz, Javier Lorca, Jesus Folgueira

Abstract: The fifth generation of mobile communications is anticipated to open up innovation opportunities for new industries such as vertical markets. However, these verticals originate myriad use cases with diverging requirements that future 5G networks have to efficiently support. Network slicing may be a natural solution to simultaneously accommodate over a common network infrastructure the wide range o… ▽ More The fifth generation of mobile communications is anticipated to open up innovation opportunities for new industries such as vertical markets. However, these verticals originate myriad use cases with diverging requirements that future 5G networks have to efficiently support. Network slicing may be a natural solution to simultaneously accommodate over a common network infrastructure the wide range of services that vertical-specific use cases will demand. In this article, we present the network slicing concept, with a particular focus on its application to 5G systems. We start by summarizing the key aspects that enable the realization of so-called network slices. Then, we give a brief overview on the SDN architecture proposed by the ONF and show that it provides tools to support slicing. We argue that although such architecture paves the way for network slicing implementation, it lacks some essential capabilities that can be supplied by NFV. Hence, we analyze a proposal from the ETSI to incorporate the capabilities of SDN into the NFV architecture. Additionally, we present an example scenario that combines SDN and NFV technologies to address the realization of network slices. Finally, we summarize the open research issues with the purpose of motivating new advances in this field. △ Less

Submitted 1 May, 2017; v1 submitted 14 March, 2017; originally announced March 2017.

Modeling and Dimensioning of a Virtualized MME for 5G Mobile Networks

Authors: Jonathan Prados-Garzon, Juan J. Ramos-Munoz, Pablo Ameigeiras, Pilar Andres-Maldonado, Juan M. Lopez-Soler

Abstract: Network Function Virtualization is considered one of the key technologies for develo** the future mobile networks. In this paper, we propose a theoretical framework to evaluate the performance of an LTE virtualized Mobility Management Entity (vMME) hosted in a data center. This theoretical framework consists of i) a queuing network to model the vMME in a data center, and ii) analytic expressions… ▽ More Network Function Virtualization is considered one of the key technologies for develo** the future mobile networks. In this paper, we propose a theoretical framework to evaluate the performance of an LTE virtualized Mobility Management Entity (vMME) hosted in a data center. This theoretical framework consists of i) a queuing network to model the vMME in a data center, and ii) analytic expressions to estimate the overall mean system delay and the signaling workload to be processed by the vMME. We validate our mathematical model by simulation. One direct use of the proposed model is vMME dimensioning, i.e., to compute the number of vMME processing instances to provide a target system delay given the number of users in the system. Additionally, the paper includes a scalability analysis of the system. In our study, we consider the billing model and a data center setup of Amazon Elastic Compute Cloud service, and estimate experimentally the processing time of MME processing instances for different LTE control procedures. For the considered setup, our results show that a vMME is scalable for signaling workloads up to 37000 LTE control procedures per second for a target mean system delay of 1 ms. The database performance assumed imposes this limit in the system scalability. △ Less

Submitted 13 March, 2017; originally announced March 2017.

Comments: 12 pages, 10 figures, Journal, IEEE Transactions on Vehicular Technology 2016

Analytical Modeling for Virtualized Network Functions

Authors: Jonathan Prados-Garzon, Pablo Ameigeiras, Juan J. Ramos-Munoz, Pilar Andres-Maldonado, Juan M. Lopez-Soler

Abstract: Network Function Virtualization (NFV) is considered one of the key technologies for the 5G mobile networks. In NFV, network functions are implemented in software components denominated Virtual Network Functions (VNFs) running on commodity hardware. In this paper, we propose an analytical model based on an open queuing network of G/G/m queues to model VNFs with single- or multi-tier designs, and ch… ▽ More Network Function Virtualization (NFV) is considered one of the key technologies for the 5G mobile networks. In NFV, network functions are implemented in software components denominated Virtual Network Functions (VNFs) running on commodity hardware. In this paper, we propose an analytical model based on an open queuing network of G/G/m queues to model VNFs with single- or multi-tier designs, and chains of VNFs. Our model is flexible and generic enough to capture the behavior of such systems. We validate our model by simulation. Specifically, we validate it for an LTE virtualized Mobility Management Entity with a three-tiered architecture use case. We also compare our model with the estate of the art, in terms of computational complexity and estimation error. The results show that our model has a computational complexity similar to the method for analyzing Jackson's networks. Additionally, our model exhibits an estimation error, measured as the relative error for the estimation of the mean response time, approximately equal to 10%, whereas for the considered baseline systems it ranges roughly from 60% to 90%. △ Less

Submitted 13 March, 2017; v1 submitted 1 March, 2017; originally announced March 2017.

Comments: 6 pages, 4 figures, conference ICC17-WT01

Latency Evaluation of a Virtualized MME

Authors: Jonathan Prados-Garzon, Juan J. Ramos-Munoz, Pablo Ameigeiras, Pilar Andres-Maldonado, Juan M. Lopez Soler

Abstract: Network Virtualization is one of the key technologies for develo** the future mobile networks. However, the performance of virtual mobile entities may not be sufficient for delivering the service required for future networks in terms of throughput or service time. In addition, to take advantage of the virtualization capabilities, a criterion to decide when to scale out the number of instances is… ▽ More Network Virtualization is one of the key technologies for develo** the future mobile networks. However, the performance of virtual mobile entities may not be sufficient for delivering the service required for future networks in terms of throughput or service time. In addition, to take advantage of the virtualization capabilities, a criterion to decide when to scale out the number of instances is a must. In this paper we propose an LTE virtualized Mobility Management Entity queue model to evaluate its service time for a given signaling workload. The estimation of this latency can serve to decide how many processing instances should be deployed to provide a target service. Additionally, we provide a compound data traffic model for the future mobile applications, and we predict theoretically the control workload that it will generate. Finally, we evaluate the virtualized Mobility Management Entity overall delay by simulation, providing insights for selecting the number of virtual instances for a given number of users. △ Less

Submitted 9 December, 2015; originally announced December 2015.