-
Error Rate and Ergodic Capacity of RF-FSO System with Partial Relay Selection in the Presence of Pointing Errors
Authors:
Milica I. Petkovic,
Imran Shafique Ansari,
Goran T. Djordjevic,
Khalid A. Qaraqe
Abstract:
This paper presents an analysis of a multiple dual-hop relaying system, which is composed of km-class radio frequency (RF)-free-space optical (FSO) links. Partial relay selection based on outdated channel state information (CSI) is employed in order to select active relay for further transmission. Amplify-and-forward relaying protocol is utilized. The RF links are assumed to be subject to Rayleigh…
▽ More
This paper presents an analysis of a multiple dual-hop relaying system, which is composed of km-class radio frequency (RF)-free-space optical (FSO) links. Partial relay selection based on outdated channel state information (CSI) is employed in order to select active relay for further transmission. Amplify-and-forward relaying protocol is utilized. The RF links are assumed to be subject to Rayleigh fading, and the FSO links are influenced by both Gamma-Gamma atmospheric turbulence and pointing errors. On the basis of our previously derived expression for cumulative distribution function of the equivalent signal-to-noise ratio of the whole system, we derive novel analytical expressions for the average bit-error rate (BER) and ergodic capacity that are presented in terms of the Meijer's G-function and extended generalized bivariate Meijer's G-function, respectively. The numerical results are confirmed by Monte Carlo simulations. Considering the effect of time-correlation between outdated CSI and actual CSI related to the RF channel at the time of transmission, the average BER and the ergodic capacity dependence on various system and channel parameters are observed and discussed. The results illustrate that the temporal correlation between outdated and actual CSI has strong effect on system performance, particularly on BER values, when FSO hop is influenced by favorable conditions. Keywords: Bit error rate, ergodic capacity, free-space optical systems, partial relay selection, radio frequency systems.
△ Less
Submitted 28 September, 2022; v1 submitted 27 September, 2022;
originally announced September 2022.
-
Spectrum Sensing and Signal Identification with Deep Learning based on Spectral Correlation Function
Authors:
Kürşat Tekbıyık,
Özkan Akbunar,
Ali Rıza Ekti,
Ali Görçin,
Güneş Karabulut Kurt,
Khalid A. Qaraqe
Abstract:
Spectrum sensing is one of the means of utilizing the scarce source of wireless spectrum efficiently. In this paper, a convolutional neural network (CNN) model employing spectral correlation function which is an effective characterization of cyclostationarity property, is proposed for wireless spectrum sensing and signal identification. The proposed method classifies wireless signals without a pri…
▽ More
Spectrum sensing is one of the means of utilizing the scarce source of wireless spectrum efficiently. In this paper, a convolutional neural network (CNN) model employing spectral correlation function which is an effective characterization of cyclostationarity property, is proposed for wireless spectrum sensing and signal identification. The proposed method classifies wireless signals without a priori information and it is implemented in two different settings entitled CASE1 and CASE2. In CASE1, signals are jointly sensed and classified. In CASE2, sensing and classification are conducted in a sequential manner. In contrary to the classical spectrum sensing techniques, the proposed CNN method does not require a statistical decision process and does not need to know the distinct features of signals beforehand. Implementation of the method on the measured overthe-air real-world signals in cellular bands indicates important performance gains when compared to the signal classifying deep learning networks available in the literature and against classical sensing methods. Even though the implementation herein is over cellular signals, the proposed approach can be extended to the detection and classification of any signal that exhibits cyclostationary features. Finally, the measurement-based dataset which is utilized to validate the method is shared for the purposes of reproduction of the results and further research and development.
△ Less
Submitted 28 April, 2021; v1 submitted 17 March, 2020;
originally announced March 2020.
-
From D2D to Ds2D: Prolonging the Battery Life of Mobile Devices via Ds2D Communications
Authors:
Muhammad Z. Shakir,
Muhammad Ismail,
Xianbin Wang,
Khalid A. Qaraqe,
Erchin Serpedin
Abstract:
Emerging device centric systems (DCS) such as device-to-device (D2D) communications are considered as a standard part of future mobile networks, where operators/consumers involve the devices in direct communication to improve the cellular system throughput, latency, fairness, and energy efficiency. However, battery life of mobile devices involved in such communications is crucial for 5G smartphone…
▽ More
Emerging device centric systems (DCS) such as device-to-device (D2D) communications are considered as a standard part of future mobile networks, where operators/consumers involve the devices in direct communication to improve the cellular system throughput, latency, fairness, and energy efficiency. However, battery life of mobile devices involved in such communications is crucial for 5G smartphone users to explore the emerging applications in DCS. It is anticipated that the owners of 5G-enabled smartphones use their devices more extensively to talk, text, email, and surf the Web more often than do customers with 4G smartphones or traditional handsets, which puts a significantly higher demand on the battery life. Smartphones are currently equipped with multiple radio interfaces that enable them to access different types of wireless networks including LTE-direct and Wi-Fi-direct, besides cellular networks. Such a capability is not well explored within the context of DCS. This article proposes a new scheme to support the emerging features in DCS where a D2D-enabled mobile device (sink device or a file/content requester) aggregates the radio resources of multiple mobile devices (source devices or file/content providers) via its multiple radio interfaces such that the scheme is referred to as devices-to-device (Ds2D) communications. Ds2D communication scheme ensures an optimal packet split among the source mobile devices to improve the file/content transfer latency (FTL), energy efficiency, and battery life. Simulation results demonstrate that the proposed optimal packet split scheme among multiple source devices participating in Ds2D communication scheme guarantees an improvement in mobile battery life over wide range of data rate levels in comparison with the random packet split strategy and traditional D2D communication paradigm between the sink and source mobile devices.
△ Less
Submitted 30 March, 2017;
originally announced March 2017.
-
Performance of Opportunistic Fixed Gain Bidirectional Relaying With Outdated CSI
Authors:
Fahd Ahmed Khan,
Kamel Tourki,
Mohamed-Slim Alouini,
Khalid A. Qaraqe
Abstract:
This paper studies the impact of using outdated channel state information for relay selection on the performance of a network where two sources communicate with each other via fixed-gain amplifyand- forward relays. For a Rayleigh faded channel, closed-form expressions for the outage probability, moment generating function and symbol error rate are derived. Simulations results are also presented to…
▽ More
This paper studies the impact of using outdated channel state information for relay selection on the performance of a network where two sources communicate with each other via fixed-gain amplifyand- forward relays. For a Rayleigh faded channel, closed-form expressions for the outage probability, moment generating function and symbol error rate are derived. Simulations results are also presented to corroborate the derived analytical results. It is shown that adding relays does not improve the performance if the channel is substantially outdated. Furthermore, relay location is also taken into consideration and it is shown that the performance can be improved by placing the relay closer to the source whose channel is more outdated.
△ Less
Submitted 25 May, 2013;
originally announced May 2013.
-
Random Subcarrier Allocation in OFDM-Based Cognitive Radio Networks
Authors:
Sabit Ekin,
Mohamed M. Abdallah,
Khalid A. Qaraqe,
Erchin Serpedin
Abstract:
This paper investigates the performance of an orthogonal frequency-division multiplexing (OFDM)-based cognitive radio (CR) spectrum sharing communication system that assumes random allocation and absence of the primary user's (PU) channel occupation information, i.e., no spectrum sensing is employed to acquire information about the availability of unused subcarriers. In case of a single secondary…
▽ More
This paper investigates the performance of an orthogonal frequency-division multiplexing (OFDM)-based cognitive radio (CR) spectrum sharing communication system that assumes random allocation and absence of the primary user's (PU) channel occupation information, i.e., no spectrum sensing is employed to acquire information about the availability of unused subcarriers. In case of a single secondary user (SU) in the secondary network, due to the lack of information of PUs' activities, the SU randomly allocates the subcarriers of the primary network and collide with the PUs' subcarriers with a certain probability. To maintain the quality of service (QoS) requirement of PUs, the interference that SU causes onto PUs is controlled by adjusting SU's transmit power below a predefined threshold, referred to as interference temperature. In this work, the average capacity of SU with subcarrier collisions is employed as performance measure to investigate the proposed random allocation scheme for both general and Rayleigh channel fading models. Bounds and scaling laws of average capacity with respect to the number of SU's, PUs' and available subcarriers are derived. In addition, in the presence of multiple SUs, the multiuser diversity gain of SUs assuming an opportunistic scheduling is also investigated. To avoid the interference at the SUs that might be caused by the random allocation scheme and obtain the maximum sum rate for SUs based on the available subcarriers, an efficient centralized sequential algorithm based on the opportunistic scheduling and random allocation (utilization) methods is proposed to ensure the orthogonality of assigned subcarriers.
△ Less
Submitted 2 July, 2012;
originally announced July 2012.
-
Time Delay Estimation in Cognitive Radio Systems
Authors:
Fatih Kocak,
Hasari Celebi,
Sinan Gezici,
Khalid A. Qaraqe,
Huseyin Arslan,
H. Vincent Poor
Abstract:
In cognitive radio systems, secondary users can utilize multiple dispersed bands that are not used by primary users. In this paper, time delay estimation of signals that occupy multiple dispersed bands is studied. First, theoretical limits on time delay estimation are reviewed. Then, two-step time delay estimators that provide trade-offs between computational complexity and performance are inves…
▽ More
In cognitive radio systems, secondary users can utilize multiple dispersed bands that are not used by primary users. In this paper, time delay estimation of signals that occupy multiple dispersed bands is studied. First, theoretical limits on time delay estimation are reviewed. Then, two-step time delay estimators that provide trade-offs between computational complexity and performance are investigated. In addition, asymptotic optimality properties of the two-step time delay estimators are discussed. Finally, simulation results are presented to explain the theoretical results.
△ Less
Submitted 24 October, 2009;
originally announced October 2009.
