-
Full-Stack End-to-End Sub-THz Simulations at 140 GHz using NYUSIM Channel Model in ns-3
Authors:
Hitesh Poddar,
Akhileswar Chowdary,
Theodore S. Rappaport,
Marwa Chafii
Abstract:
The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYU…
▽ More
The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYUSIM channel model to simulate channels above 100 GHz in all 3GPP scenarios including urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF). We evaluate the full stack downlink end-to-end performance (throughput, latency, and packet drop) experienced by a single user equipment (UE) connected to a Next Generation Node B (gNB) operating in the sub-THz bands for three gNB--UE antenna configurations: 8x8--4x4, 16x16--4x4, and 64x64--8x8 by using the NYUSIM channel model at 140 GHz in the ns-3 mmWave module. Our simulations demonstrate that sub-THz bands can enable high-fidelity applications that require data rates exceeding 1 Gbps and latency below 15 milliseconds (ms) using the current mmWave protocol stack, and large antenna arrays. In addition, we show the variation in throughput vs number of realizations and find the optimal number of realizations required to obtain statistically significant results. We strongly encourage researchers worldwide to adopt a similar approach, as it enables the readers to assess the accuracy and reliability of the reported results and enhance the findings' overall interpretability.
△ Less
Submitted 11 January, 2024; v1 submitted 26 December, 2023;
originally announced December 2023.
-
ns-3 Implementation of Sub-Terahertz and Millimeter Wave Drop-based NYU Channel Model (NYUSIM)
Authors:
Hitesh Poddar,
Tomoki Yoshimura,
Matteo Pagin,
Theodore S Rappaport,
Art Ishii,
Michele Zorzi
Abstract:
The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low-latency applications. To enable different verticals and use cases, engineers must take a holistic approach to build, analyze, and study different parts of the network and the interplay among the lower and higher layers of the protocol stack. It is of paramount importance…
▽ More
The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low-latency applications. To enable different verticals and use cases, engineers must take a holistic approach to build, analyze, and study different parts of the network and the interplay among the lower and higher layers of the protocol stack. It is of paramount importance to accurately characterize the radio propagation in diverse scenarios such as urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF) for a wide range of frequencies. The 3GPP statistical channel model (SCM) is oversimplified and restricted to the frequency range of 0.5-100 GHz. Thus, to overcome these limitations, this paper presents a detailed implementation of the drop-based NYU channel model (NYUSIM) for the frequency range of 0.5-150 GHz for the UMi, UMa, RMa, InH, and InF scenarios. NYUSIM allows researchers to design and evaluate new algorithms and protocols for future sub-THz wireless networks in ns-3.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Full-Stack End-To-End mmWave Simulations Using 3GPP and NYUSIM Channel Model in ns-3
Authors:
H. Poddar,
T. Yoshimura,
M. Pagin,
T. S. Rappaport,
A. Ishii,
M. Zorzi
Abstract:
Accurate channel modeling and simulation tools are vital for studying sub-THz and millimeter (mmWave) wideband communication system performance. To accurately design future high data rate, low latency wireless modems, the entire protocol stack must be appropriately modeled to understand how the physical layer impacts the end-to-end performance experienced by the end user. This paper presents a ful…
▽ More
Accurate channel modeling and simulation tools are vital for studying sub-THz and millimeter (mmWave) wideband communication system performance. To accurately design future high data rate, low latency wireless modems, the entire protocol stack must be appropriately modeled to understand how the physical layer impacts the end-to-end performance experienced by the end user. This paper presents a full stack end-to-end performance analysis in ns-3 using drop-based NYU channel model (NYUSIM) and 3GPP statistical channel model (SCM) in scenarios, namely urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), and indoor hotspot (InH) at 28 GHz with 100 MHz bandwidth. Video data is transmitted at 50 Mbps using User Datagram Protocol (UDP), and we observe that the RMa channel is benign in non-line of sight (NLOS) for NYUSIM and 3GPP SCM as it exhibits no packet drops and yields maximum throughput (48.1 Mbps) and latency of $\sim$ 20 ms. In NLOS, for NYUSIM, the UMa and RMa channels are similar in terms of throughput and packet drops, and the latency in UMi and InH scenarios is 10 times and 25 times higher respectively compared to UMa. Our results indicate that mmWave bands can support data rates of 50 Mbps with negligible packet drops and latency below 150 ms in all scenarios using NYUSIM.
△ Less
Submitted 5 March, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
-
An analysis of the Internet of Things in wireless sensor network technologies
Authors:
Harshit Poddar,
Vansh Singh
Abstract:
Information may be accessed from a distance thanks to computer networks. Wireless or wired networks are also possible. Due to recent developments in wireless infrastructure, wireless sensor networks (WSNs) were developed. Activities or events occurring in the environment are monitored, recorded, and managed by WSN. Through a variety of routing techniques, data relaying is done in these systems. Th…
▽ More
Information may be accessed from a distance thanks to computer networks. Wireless or wired networks are also possible. Due to recent developments in wireless infrastructure, wireless sensor networks (WSNs) were developed. Activities or events occurring in the environment are monitored, recorded, and managed by WSN. Through a variety of routing techniques, data relaying is done in these systems. The fourth industrial revolution, or Industry 4.0, is defined as the integration of complex physical automation systems made up of machinery and devices connected by sensors and managed by software. This is done to boost the efficiency and reliability of operations. Industry 4.0 is viewed as a possibility because of industrial IoT, the concept of leveraging IoT technology in manufacturing. delivering, in an industrial setting, a means of connecting engines, power grids, and sensors to the cloud. In this essay, we'll try to comprehend how the Internet of Things (IoT) works in wireless sensor networks and how it might be used in various situations.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
A Power Efficiency Metric for Comparing Energy Consumption in Future Wireless Networks in the Millimeter Wave and Terahertz bands
Authors:
O. Kanhere,
H. Poddar,
Y. Xing,
D. Shakya,
S. Ju,
T. S. Rappaport
Abstract:
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will require attention to sustainability and reduction of power whenever possible to reduce the carbon footprint while maintaining adequate battery life for the mass…
▽ More
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will require attention to sustainability and reduction of power whenever possible to reduce the carbon footprint while maintaining adequate battery life for the massive number of resource-constrained devices to be deployed. This article analyzes power consumption of future wireless networks using a new metric, the power waste factor ($ W $), which shows promise for the study and development of "green G" - green technology for future wireless networks. Using $ W $, power efficiency can be considered by quantifying the power wasted by all devices on a signal path in a cascade. We then show that the consumption efficiency factor ($CEF$), defined as the ratio of the maximum data rate achieved to the total power consumed, is a novel and powerful measure of power efficiency that shows less energy per bit is expended as the cell size shrinks and carrier frequency and channel bandwidth increase. Our findings offer a standard approach to calculating and comparing power consumption and energy efficiency.
△ Less
Submitted 14 January, 2023; v1 submitted 10 September, 2022;
originally announced September 2022.