-
Massive MIMO Channel Estimation with Low-Resolution Spatial Sigma-Delta ADCs
Authors:
Shilpa Rao,
Gonzalo Seco-Granados,
Hessam Pirzadeh,
Josef A. Nossek,
A. Lee Swindlehurst
Abstract:
We consider channel estimation for an uplink massive multiple-input multiple-output (MIMO) system where the base station (BS) uses an array with low-resolution (1-2 bit) analog-to-digital converters and a spatial Sigma-Delta ($ΣΔ$) architecture to shape the quantization noise away from users in some angular sector. We develop a linear minimum mean squared error (LMMSE) channel estimator based on t…
▽ More
We consider channel estimation for an uplink massive multiple-input multiple-output (MIMO) system where the base station (BS) uses an array with low-resolution (1-2 bit) analog-to-digital converters and a spatial Sigma-Delta ($ΣΔ$) architecture to shape the quantization noise away from users in some angular sector. We develop a linear minimum mean squared error (LMMSE) channel estimator based on the Bussgang decomposition that reformulates the nonlinear quantizer model using an equivalent linear model plus quantization noise. We also analyze the uplink achievable rate with maximal ratio combining (MRC), zero-forcing (ZF), and LMMSE receivers and provide a lower bound for the achievable rate with the MRC receiver. Numerical results show superior channel estimation and sum spectral efficiency performance using the $ΣΔ$ architecture compared to conventional 1- or 2-bit quantized massive MIMO systems.
△ Less
Submitted 13 July, 2021; v1 submitted 15 May, 2020;
originally announced May 2020.
-
On the Effect of Mutual Coupling in One-Bit Spatial Sigma-Delta Massive MIMO Systems
Authors:
Hessam Pirzadeh,
Gonzalo Seco-Granados,
A. Lee Swindlehurst,
Josef A. Nossek
Abstract:
The one-bit spatial Sigma-Delta concept has recently been proposed as an approach for achieving low distortion and low power consumption for massive multi-input multi-output systems. The approach exploits users located in known angular sectors or spatial oversampling to shape the quantization noise away from desired directions of arrival. While reducing the antenna spacing alleviates the adverse i…
▽ More
The one-bit spatial Sigma-Delta concept has recently been proposed as an approach for achieving low distortion and low power consumption for massive multi-input multi-output systems. The approach exploits users located in known angular sectors or spatial oversampling to shape the quantization noise away from desired directions of arrival. While reducing the antenna spacing alleviates the adverse impact of quantization noise, it can potentially deteriorate the performance of the massive array due to excessive mutual coupling. In this paper, we analyze the impact of mutual coupling on the uplink spectral efficiency of a spatial one-bit Sigma-Delta massive MIMO architecture, and compare the resulting performance degradation to standard one-bit quantization as well as the ideal case with infinite precision. Our simulations show that the one-bit Sigma-Delta array is particularly advantageous in space-constrained scenarios, can still provide significant gains even in the presence of mutual coupling when the antennas are closely spaced.
△ Less
Submitted 11 July, 2020; v1 submitted 10 May, 2020;
originally announced May 2020.
-
Spectral Efficiency of One-Bit Sigma-Delta Massive MIMO
Authors:
Hessam Pirzadeh,
Gonzalo Seco-Granados,
Shilpa Rao,
A. Lee Swindlehurst
Abstract:
We examine the uplink spectral efficiency of a massive MIMO base station employing a one-bit Sigma-Delta sampling scheme implemented in the spatial rather than the temporal domain. Using spatial rather than temporal oversampling, and feedback of the quantization error between adjacent antennas, the method shapes the spatial spectrum of the quantization noise away from an angular sector where the s…
▽ More
We examine the uplink spectral efficiency of a massive MIMO base station employing a one-bit Sigma-Delta sampling scheme implemented in the spatial rather than the temporal domain. Using spatial rather than temporal oversampling, and feedback of the quantization error between adjacent antennas, the method shapes the spatial spectrum of the quantization noise away from an angular sector where the signals of interest are assumed to lie. It is shown that, while a direct Bussgang analysis of the Sigma-Delta approach is not suitable, an alternative equivalent linear model can be formulated to facilitate an analysis of the system performance. The theoretical properties of the spatial quantization noise power spectrum are derived for the Sigma-Delta array, as well as an expression for the spectral efficiency of maximum ratio combining (MRC). Simulations verify the theoretical results and illustrate the significant performance gains offered by the Sigma-Delta approach for both MRC and zero-forcing receivers.
△ Less
Submitted 11 July, 2020; v1 submitted 12 October, 2019;
originally announced October 2019.
-
Spectral Efficiency of Mixed-ADC Massive MIMO
Authors:
Hessam Pirzadeh,
A. Lee Swindlehurst
Abstract:
We study the spectral efficiency (SE) of a mixed-ADC massive MIMO system in which K single-antenna users communicate with a base station (BS) equipped with M antennas connected to N high-resolution ADCs and M-N one-bit ADCs. This architecture has been proposed as an approach for realizing massive MIMO systems with reasonable power consumption. First, we investigate the effectiveness of mixed-ADC a…
▽ More
We study the spectral efficiency (SE) of a mixed-ADC massive MIMO system in which K single-antenna users communicate with a base station (BS) equipped with M antennas connected to N high-resolution ADCs and M-N one-bit ADCs. This architecture has been proposed as an approach for realizing massive MIMO systems with reasonable power consumption. First, we investigate the effectiveness of mixed-ADC architectures in overcoming the channel estimation error caused by coarse quantization. For the channel estimation phase, we study to what extent one can combat the SE loss by exploiting just N << M pairs of high-resolution ADCs. We extend the round-robin training scheme for mixed-ADC systems to include both high-resolution and one-bit quantized observations. Then, we analyze the impact of the resulting channel estimation error in the data detection phase. We consider random high-resolution ADC assignment and also analyze a simple antenna selection scheme to increase the SE. Analytical expressions are derived for the SE for maximum ratio combining (MRC) and numerical results are presented for zero-forcing (ZF) detection. Performance comparisons are made against systems with uniform ADC resolution and against mixed-ADC systems without round-robin training to illustrate under what conditions each approach provides the greatest benefit.
△ Less
Submitted 29 April, 2018; v1 submitted 27 February, 2018;
originally announced February 2018.
-
A Comparison of Hybrid Beamforming and Digital Beamforming with Low-Resolution ADCs for Multiple Users and Imperfect CSI
Authors:
Kilian Roth,
Hessam Pirzadeh,
A. Lee Swindlehurst,
Josef A. Nossek
Abstract:
For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array is required at both the mobile and basestation. Due to the large bandwidth and inefficient amplifiers available in CMOS for mmWave, the analog front-end of the…
▽ More
For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array is required at both the mobile and basestation. Due to the large bandwidth and inefficient amplifiers available in CMOS for mmWave, the analog front-end of the receiver with a large number of antennas becomes especially power hungry. Two main solutions exist to reduce the power consumption: hybrid beam forming and digital beam forming with low resolution Analog to Digital Converters (ADCs). In this work we compare the spectral and energy efficiency of both systems under practical system constraints. We consider the effects of channel estimation, transmitter impairments and multiple simultaneous users. Our power consumption model considers components reported in literature at 60 GHz. In contrast to many other works we also consider the correlation of the quantization error, and generalize the modeling of it to non-uniform quantizers and different quantizers at each antenna. The result shows that as the SNR gets larger the ADC resolution achieving the optimal energy efficiency gets also larger. The energy efficiency peaks for 5 bit resolution at high SNR, since due to other limiting factors the achievable rate almost saturates at this resolution. We also show that in the multi-user scenario digital beamforming is in any case more energy efficient than hybrid beamforming. In addition we show that if different ADC resolutions are used we can achieve any desired trade-offs between power consumption and rate close to those achieved with only one ADC resolution.
△ Less
Submitted 25 September, 2017;
originally announced September 2017.
-
Subverting Massive MIMO by Smart Jamming
Authors:
Hessam Pirzadeh,
S. Mohammad Razavizadeh,
Emil Björnson
Abstract:
We consider uplink transmission of a massive multi-user multiple-input multiple-output (MU-MIMO) system in the presence of a smart jammer. The jammer aims to degrade the sum spectral efficiency of the legitimate system by attacking both the training and data transmission phases. First, we derive a closed-form expression for the sum spectral efficiency by taking into account the presence of a smart…
▽ More
We consider uplink transmission of a massive multi-user multiple-input multiple-output (MU-MIMO) system in the presence of a smart jammer. The jammer aims to degrade the sum spectral efficiency of the legitimate system by attacking both the training and data transmission phases. First, we derive a closed-form expression for the sum spectral efficiency by taking into account the presence of a smart jammer. Then, we determine how a jammer with a given energy budget should attack the training and data transmission phases to induce the maximum loss to the sum spectral efficiency. Numerical results illustrate the impact of optimal jamming specifically in the large limit of the number of base station (BS) antennas.
△ Less
Submitted 13 November, 2015; v1 submitted 29 September, 2015;
originally announced September 2015.