Showing 1–13 of 13 results for author: Perovic, N S

Mutual Information Optimization for SIM-Based Holographic MIMO Systems

Authors: Nemanja Stefan Perović, Le-Nam Tran

Abstract: In the context of emerging stacked intelligent metasurface (SIM)-based holographic MIMO (HMIMO) systems, a fundamental problem is to study the mutual information (MI) between transmitted and received signals to establish their capacity. However, direct optimization or analytical evaluation of the MI, particularly for discrete signaling, is often intractable. To address this challenge, we adopt the… ▽ More In the context of emerging stacked intelligent metasurface (SIM)-based holographic MIMO (HMIMO) systems, a fundamental problem is to study the mutual information (MI) between transmitted and received signals to establish their capacity. However, direct optimization or analytical evaluation of the MI, particularly for discrete signaling, is often intractable. To address this challenge, we adopt the channel cutoff rate (CR) as an alternative optimization metric for the MI maximization. In this regard, we propose an alternating projected gradient method (APGM), which optimizes the CR of a SIM-based HMIMO system by adjusting signal precoding and the phase shifts across the transmit and receive SIMs in a layer-by-layer basis. Simulation results indicate that the proposed algorithm significantly enhances the CR, achieving substantial gains proportional to those observed for the corresponding MI. This justifies the effectiveness of using the channel CR for the MI optimization. Moreover, we demonstrate that the integration of digital precoding, even on a modest scale, has a significant impact on the ultimate performance of SIM-aided systems. △ Less

Submitted 27 March, 2024; originally announced March 2024.

Comments: 5 pages, 2 figures

Optimization of RIS-Aided MIMO -- A Mutually Coupled Loaded Wire Dipole Model

Authors: H. El Hassani, X. Qian, S. Jeong, N. S. Perović, M. Di Renzo, P. Mursia, V. Sciancalepore, X. Costa-Pérez

Abstract: We consider a reconfigurable intelligent surface (RIS) assisted multiple-input multiple-output (MIMO) system in the presence of scattering objects. The MIMO transmitter and receiver, the RIS, and the scattering objects are modeled as mutually coupled thin wires connected to load impedances. We introduce a novel numerical algorithm for optimizing the tunable loads connected to the RIS, which does n… ▽ More We consider a reconfigurable intelligent surface (RIS) assisted multiple-input multiple-output (MIMO) system in the presence of scattering objects. The MIMO transmitter and receiver, the RIS, and the scattering objects are modeled as mutually coupled thin wires connected to load impedances. We introduce a novel numerical algorithm for optimizing the tunable loads connected to the RIS, which does not utilize the Neumann series approximation. The algorithm is provably convergent, has polynomial complexity with the number of RIS elements, and outperforms the most relevant benchmark algorithms while requiring fewer iterations and converging in a shorter time. △ Less

Submitted 18 September, 2023; v1 submitted 15 June, 2023; originally announced June 2023.

Optimization of RIS-aided SISO Systems Based on a Mutually Coupled Loaded Wire Dipole Model

Authors: Nemanja Stefan Perović, Le-Nam Tran, Marco Di Renzo, Mark F. Flanagan

Abstract: The electromagnetic (EM) features of reconfigurable intelligent surfaces (RISs) fundamentally determine their operating principles and performance. Motivated by these considerations, we study a single-input single-output (SISO) system in the presence of an RIS, which is characterized by a circuit-based EM-consistent model. Specifically, we model the RIS as a collection of thin wire dipoles control… ▽ More The electromagnetic (EM) features of reconfigurable intelligent surfaces (RISs) fundamentally determine their operating principles and performance. Motivated by these considerations, we study a single-input single-output (SISO) system in the presence of an RIS, which is characterized by a circuit-based EM-consistent model. Specifically, we model the RIS as a collection of thin wire dipoles controlled by tunable load impedances, and we propose a gradient-based algorithm for calculating the optimal impedances of the scattering elements of the RIS in the presence of mutual coupling. Furthermore, we prove the convergence of the proposed algorithm and derive its computational complexity in terms of number of complex multiplications. Numerical results show that the proposed algorithm provides better performance and converges faster than a benchmark algorithm. △ Less

Submitted 12 April, 2024; v1 submitted 22 May, 2023; originally announced May 2023.

Intelligent Omni-Surfaces (IOSs) for the MIMO Broadcast Channel

Authors: Abdelhamed Mohamed, Nemanja Stefan Perović, Marco Di Renzo

Abstract: In this paper, we consider intelligent omni-surfaces (IOSs), which are capable of simultaneously reflecting and refracting electromagnetic waves. We focus our attention on the multiple-input multiple-output (MIMO) broadcast channel, and we introduce an algorithm for jointly optimizing the covariance matrix at the base station, the matrix of reflection and transmission coefficients at the IOS, and… ▽ More In this paper, we consider intelligent omni-surfaces (IOSs), which are capable of simultaneously reflecting and refracting electromagnetic waves. We focus our attention on the multiple-input multiple-output (MIMO) broadcast channel, and we introduce an algorithm for jointly optimizing the covariance matrix at the base station, the matrix of reflection and transmission coefficients at the IOS, and the amount of power that is reflected and refracted from the IOS. The distinguishable feature of this work lies in taking into account that the reflection and transmission coefficients of an IOS are tightly coupled. Simulation results are illustrated to show the convergence of the proposed algorithm and the benefits of using surfaces with simultaneous reflection and refraction capabilities. △ Less

Submitted 27 June, 2022; originally announced June 2022.

Comments: Accepted to be published in the 23rd IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC 2022)

RIS-Assisted Receive Quadrature Space-Shift Keying: A New Paradigm and Performance Analysis

Authors: Mohamad H. Dinan, Nemanja Stefan Perovic, Mark F. Flanagan

Abstract: Reconfigurable intelligent surfaces (RISs) represent a promising candidate for sixth-generation (6G) wireless networks, as the RIS technology provides a new solution to control the propagation channel in order to improve the efficiency of a wireless link through enhancing the received signal power. In this paper, we propose RIS-assisted receive quadrature space-shift keying (RIS-RQSSK), which enha… ▽ More Reconfigurable intelligent surfaces (RISs) represent a promising candidate for sixth-generation (6G) wireless networks, as the RIS technology provides a new solution to control the propagation channel in order to improve the efficiency of a wireless link through enhancing the received signal power. In this paper, we propose RIS-assisted receive quadrature space-shift keying (RIS-RQSSK), which enhances the spectral efficiency of an RIS-based index modulation (IM) system by using the real and imaginary dimensions independently for the purpose of IM. Therefore, the error rate performance of the system is improved as all RIS elements reflect the incident transmit signal toward both selected receive antennas. At the receiver, a low-complexity but effective greedy detector (GD) can be employed which determines the maximum energy per dimension at the receive antennas. A max-min optimization problem is defined to maximize the received signal-to-noise ratio (SNR) components at both selected receive antennas; an analytical solution is provided based on Lagrange duality. In particular, the multi-variable optimization problem is shown to reduce to the solution of a single-variable equation, which results in a very simple design procedure. In addition, we investigate the average bit error probability (ABEP) of the proposed RIS-RQSSK system and derive a closed-form approximate upper bound on the ABEP. We also provide extensive numerical simulations to validate our derivations. Numerical results show that the proposed RIS-RQSSK scheme substantially outperforms recent prominent benchmark schemes. This enhancement considerably increases with an increasing number of receive antennas. △ Less

Submitted 12 August, 2022; v1 submitted 23 November, 2021; originally announced November 2021.

Comments: 16 pages (double column), 6 figures

On the Maximum Achievable Sum-rate of the RIS-aided MIMO Broadcast Channel

Authors: Nemanja Stefan Perović, Le-Nam Tran, Marco Di Renzo, Mark F. Flanagan

Abstract: Reconfigurable intelligent surfaces (RISs) represent a new technology that can shape the radio wave propagation and thus offers a great variety of possible performance and implementation gains. Motivated by this, we investigate the achievable sum-rate optimization in a broadcast channel (BC) in the presence of RISs. We solve this problem by exploiting the well-known duality between the Gaussian mu… ▽ More Reconfigurable intelligent surfaces (RISs) represent a new technology that can shape the radio wave propagation and thus offers a great variety of possible performance and implementation gains. Motivated by this, we investigate the achievable sum-rate optimization in a broadcast channel (BC) in the presence of RISs. We solve this problem by exploiting the well-known duality between the Gaussian multiple-input multiple-output (MIMO) BC and the multiple-access channel (MAC), and we correspondingly derive three algorithms which optimize the users' covariance matrices and the RIS phase shifts in the dual MAC. The users' covariance matrices are optimized by a dual decomposition method with block coordinate maximization (BCM), or by a gradient-based method. The RIS phase shifts are either optimized sequentially by using a closed-form expression, or are computed in parallel by using a gradient-based method. We present a computational complexity analysis for the proposed algorithms. Simulation results show that the proposed algorithms tend to converge to the same achievable sum-rate overall, but may produce different sum-rate performance for some specific situations, due to the non-convexity of the considered problem. Also, the gradient-based optimization methods are generally more time efficient. In addition, we demonstrate that the proposed algorithms can provide a significant gain in the RIS-assisted BC assisted by multiple RISs and that the gain depends on the placement of the RISs. △ Less

Submitted 14 December, 2022; v1 submitted 4 October, 2021; originally announced October 2021.

Comments: arXiv admin note: text overlap with arXiv:2104.12108

Sparse Layered MIMO with Iterative Detection

Authors: Mohamad H. Dinan, Nemanja Stefan Perovic, Mark F. Flanagan

Abstract: In this paper, we propose a novel transmission scheme, called sparse layered MIMO (SL-MIMO), that combines non-orthogonal transmission and singular value decomposition (SVD) precoding. Nonorthogonality in SL-MIMO allows re-using of the eigen-channels which improves the spectral efficiency and error rate performance of the system through enhancing the coding gain and diversity gain. We also present… ▽ More In this paper, we propose a novel transmission scheme, called sparse layered MIMO (SL-MIMO), that combines non-orthogonal transmission and singular value decomposition (SVD) precoding. Nonorthogonality in SL-MIMO allows re-using of the eigen-channels which improves the spectral efficiency and error rate performance of the system through enhancing the coding gain and diversity gain. We also present a low-complexity message-passing (MP) detector for the proposed SL-MIMO system which performs quite close to maximum likelihood (ML). The joint moment generating function (MGF) of the ordered eigenvalues is calculated and used to derive a closed-form upper bound on the average word error probability (AWEP) of the SL-MIMO system, and this derived expression is then used to analyze the diversity gain of the system. We use our analytical results to design sub-optimal codebooks to minimize the error rate of the SL-MIMO system. Simulation results in 4x4 and 6x6 multiple-input multiple-output (MIMO) systems with 4-ary, 16-ary, and 64-ary constellations show that our proposed SL-MIMO scheme outperforms competing approaches such as X- and Y-codes in terms of system error rate performance. SL-MIMO has 5.6 dB advantage compared to X-codes and 4.7 dB advantage compared to Y-codes in 6x6 MIMO system with a 64-ary constellation. △ Less

Submitted 22 November, 2021; v1 submitted 21 May, 2021; originally announced May 2021.

Comments: 14 pages (double), 7 figures, 1 table

On the Achievable Sum-rate of the RIS-aided MIMO Broadcast Channel

Authors: Nemanja Stefan Perović, Le-Nam Tran, Marco Di Renzo, Mark F. Flanagan

Abstract: Reconfigurable intelligent surfaces (RISs) represent a new technology that can shape the radio wave propagation and thus offers a great variety of possible performance and implementation gains. Motivated by this, we investigate the achievable sum-rate optimization in a broadcast channel (BC) that is equipped with an RIS. We exploit the well-known duality between the Gaussian multiple-input multipl… ▽ More Reconfigurable intelligent surfaces (RISs) represent a new technology that can shape the radio wave propagation and thus offers a great variety of possible performance and implementation gains. Motivated by this, we investigate the achievable sum-rate optimization in a broadcast channel (BC) that is equipped with an RIS. We exploit the well-known duality between the Gaussian multiple-input multiple-output (MIMO) BC and multiple-access channel (MAC) to derive an alternating optimization (AO) algorithm which optimizes the users' covariance matrices and the RIS phase shifts in the dual MAC. The optimal users' covariance matrices are obtained by a dual decomposition method in which each iteration is solved in closed-form. The optimal RIS phase shifts are also computed using a derived closed-form expression. Furthermore, we present a computational complexity analysis for the proposed AO algorithm. Simulation results show that the proposed AO algorithm can provide significant achievable sum-rate gains in a BC. △ Less

Submitted 3 September, 2021; v1 submitted 25 April, 2021; originally announced April 2021.

Comments: Invited paper to Special session: Reconfigurable Intelligent Surfaces for Wireless Communications in 22nd International Workshop on Signal Processing Advances in Wireless Communications (SPAWC), Lucca, Italy

Multilevel Polar Coded Space-Shift Keying

Authors: Muhammad Zaeem Hasan, Nemanja Stefan Perović, Mark F. Flanagan

Abstract: Multilevel coding (MLC) is a coded modulation technique which can achieve excellent performance over a range of communication channels. Polar codes have been shown to be quite compatible with communication systems using MLC, as the rate allocation of the component polar codes follows the natural polarization inherent in polar codes. MLC based techniques have not yet been studied in systems that us… ▽ More Multilevel coding (MLC) is a coded modulation technique which can achieve excellent performance over a range of communication channels. Polar codes have been shown to be quite compatible with communication systems using MLC, as the rate allocation of the component polar codes follows the natural polarization inherent in polar codes. MLC based techniques have not yet been studied in systems that use spatial modulation (SM). SM makes the polar code design difficult as the spatial bits actually select a channel index for transmission. To solve this problem, we propose a Monte Carlo based evaluation of the ergodic capacities for the individual bit levels under the capacity rule for a space-shift keying (SSK) system, where we also make use of a single antenna activation to approximate the transmission channel for the design of the multilevel polar code. Our simulation results show that the multilevel polar coded 16 $\times$ 1 SSK system outperforms the corresponding system that uses bit-interleaved polar coded modulation by 2.9 dB at a bit-error rate (BER) of $10^{-4}$. △ Less

Submitted 20 April, 2021; originally announced April 2021.

Optimization of RIS-aided MIMO Systems via the Cutoff Rate

Authors: Nemanja Stefan Perović, Le-Nam Tran, Marco Di Renzo, Mark F. Flanagan

Abstract: The main difficulty concerning optimizing the mutual information (MI) in reconfigurable intelligent surface (RIS)-aided communication systems with discrete signaling is the inability to formulate this optimization problem in an analytically tractable manner. Therefore, we propose to use the cutoff rate (CR) as a more tractable metric for optimizing the MI and introduce two optimization methods to… ▽ More The main difficulty concerning optimizing the mutual information (MI) in reconfigurable intelligent surface (RIS)-aided communication systems with discrete signaling is the inability to formulate this optimization problem in an analytically tractable manner. Therefore, we propose to use the cutoff rate (CR) as a more tractable metric for optimizing the MI and introduce two optimization methods to maximize the CR, assuming perfect knowledge of the channel state information (CSI). The first method is based on the projected gradient method (PGM), while the second method is derived from the principles of successive convex approximation (SCA). Simulation results show that the proposed optimization methods significantly enhance the CR and the corresponding MI. △ Less

Submitted 3 September, 2021; v1 submitted 9 December, 2020; originally announced December 2020.

Achievable Rate Optimization for MIMO Systems with Reconfigurable Intelligent Surfaces

Authors: Nemanja Stefan Perović, Le-Nam Tran, Marco Di Renzo, Mark F. Flanagan

Abstract: Reconfigurable intelligent surfaces (RISs) represent a radical new technology that can shape the radio wave propagation in wireless communication systems and offers a great variety of possible performance and implementation gains. Motivated by this, in this paper we study the achievable rate optimization for a multi-stream multiple-input multiple-output (MIMO) system equipped with an RIS, and form… ▽ More Reconfigurable intelligent surfaces (RISs) represent a radical new technology that can shape the radio wave propagation in wireless communication systems and offers a great variety of possible performance and implementation gains. Motivated by this, in this paper we study the achievable rate optimization for a multi-stream multiple-input multiple-output (MIMO) system equipped with an RIS, and formulate a joint optimization problem of the covariance matrix of the transmitted signal and the RIS elements. To solve this problem, we propose an iterative optimization algorithm that is based on the projected gradient method (PGM). We derive the step size that guarantees the convergence of the proposed algorithm and we define a backtracking line search to improve its convergence rate. Furthermore, we introduce the total free space path loss (FSPL) ratio of the indirect and direct links as a first-order measure of the applicability of an RIS in the considered communication system. Simulation results show that the proposed PGM achieves the same achievable rate as a state-of-the-art benchmark scheme, but with a significantly lower computational complexity. In addition, it is demonstrated that the RIS application is particularly suitable to increase the achievable rate in an indoor environment, as in this case even a small number of RIS elements is sufficient to provide a substantial achievable rate gain. △ Less

Submitted 3 September, 2021; v1 submitted 21 August, 2020; originally announced August 2020.

Transmit-Receive Generalized Spatial Modulation Based on Dual-layered MIMO Transmission

Authors: Nemanja Stefan Perović, Marco Di Renzo, Mark F. Flanagan

Abstract: We propose a novel scheme for downlink multiuser multiple-input multiple-output (MIMO) systems, called dual-layered transmit-receive generalized spatial modulation (DL-TR-GSM). The proposed scheme is based on the concept of dual-layered transmission (DLT) which uses two receive antenna power levels instead of receive antenna activation/inactivation to transmit data in the receive spatial domain. H… ▽ More We propose a novel scheme for downlink multiuser multiple-input multiple-output (MIMO) systems, called dual-layered transmit-receive generalized spatial modulation (DL-TR-GSM). The proposed scheme is based on the concept of dual-layered transmission (DLT) which uses two receive antenna power levels instead of receive antenna activation/inactivation to transmit data in the receive spatial domain. Hence, in order to minimize the bit error rate (BER) for DL-TR-GSM, the optimal ratio between the two power levels is determined. To further characterize DL-TR-GSM, we fully derive the computational complexity and show a significant computational complexity reduction as well as a required hardware complexity reduction of DL-TR-GSM, compared to a state-of-the-art benchmark scheme. Simulation results confirm the performance advantages of DL-TR-GSM. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Channel Capacity Optimization Using Reconfigurable Intelligent Surfaces in Indoor mmWave Environments

Authors: Nemanja Stefan Perović, Marco Di Renzo, Mark F. Flanagan

Abstract: Indoor millimeter-wave (mmWave) environment channels are typically sparsely-scattered and dominated by a strong line-of-sight (LOS) path. Therefore, communication over such channels is in general extremely difficult when the LOS path is not present. However, the recent introduction of reconfigurable intelligent surfaces (RISs), which have the potential to influence the propagation environment in a… ▽ More Indoor millimeter-wave (mmWave) environment channels are typically sparsely-scattered and dominated by a strong line-of-sight (LOS) path. Therefore, communication over such channels is in general extremely difficult when the LOS path is not present. However, the recent introduction of reconfigurable intelligent surfaces (RISs), which have the potential to influence the propagation environment in a controlled manner, has the potential to change the previous paradigm. Motivated by this, we study the channel capacity optimization utilizing RISs in indoor mmWave environments where no LOS path is present. More precisely, we propose two optimization schemes that exploit the customizing capabilities of the RIS reflection elements in order to maximize the channel capacity. The first optimization scheme exploits only the adjustability of the RIS reflection elements; for this scheme we derive an approximate expression which explains the connection between the channel capacity gains and the system parameters. The second optimization scheme jointly optimizes the RIS reflection elements and the transmit phase precoder; for this scheme, we propose a low-complexity technique called global co-phasing to determine the phase shift values for use at the RIS. Simulation results show that the optimization of the RIS reflection elements produces a significant channel capacity gain, and that this gain increases with the number of RIS elements. △ Less

Submitted 29 February, 2020; v1 submitted 31 October, 2019; originally announced October 2019.