Showing 1–10 of 10 results for author: Pawar, V

Biomedical image analysis competitions: The state of current participation practice

Authors: Matthias Eisenmann, Annika Reinke, Vivienn Weru, Minu Dietlinde Tizabi, Fabian Isensee, Tim J. Adler, Patrick Godau, Veronika Cheplygina, Michal Kozubek, Sharib Ali, Anubha Gupta, Jan Kybic, Alison Noble, Carlos Ortiz de Solórzano, Samiksha Pachade, Caroline Petitjean, Daniel Sage, Donglai Wei, Elizabeth Wilden, Deepak Alapatt, Vincent Andrearczyk, Ujjwal Baid, Spyridon Bakas, Niranjan Balu, Sophia Bano , et al. (331 additional authors not shown)

Abstract: The number of international benchmarking competitions is steadily increasing in various fields of machine learning (ML) research and practice. So far, however, little is known about the common practice as well as bottlenecks faced by the community in tackling the research questions posed. To shed light on the status quo of algorithm development in the specific field of biomedical imaging analysis,… ▽ More The number of international benchmarking competitions is steadily increasing in various fields of machine learning (ML) research and practice. So far, however, little is known about the common practice as well as bottlenecks faced by the community in tackling the research questions posed. To shed light on the status quo of algorithm development in the specific field of biomedical imaging analysis, we designed an international survey that was issued to all participants of challenges conducted in conjunction with the IEEE ISBI 2021 and MICCAI 2021 conferences (80 competitions in total). The survey covered participants' expertise and working environments, their chosen strategies, as well as algorithm characteristics. A median of 72% challenge participants took part in the survey. According to our results, knowledge exchange was the primary incentive (70%) for participation, while the reception of prize money played only a minor role (16%). While a median of 80 working hours was spent on method development, a large portion of participants stated that they did not have enough time for method development (32%). 25% perceived the infrastructure to be a bottleneck. Overall, 94% of all solutions were deep learning-based. Of these, 84% were based on standard architectures. 43% of the respondents reported that the data samples (e.g., images) were too large to be processed at once. This was most commonly addressed by patch-based training (69%), downsampling (37%), and solving 3D analysis tasks as a series of 2D tasks. K-fold cross-validation on the training set was performed by only 37% of the participants and only 50% of the participants performed ensembling based on multiple identical models (61%) or heterogeneous models (39%). 48% of the respondents applied postprocessing steps. △ Less

Submitted 12 September, 2023; v1 submitted 16 December, 2022; originally announced December 2022.

Automated Detection of Acute Promyelocytic Leukemia in Blood Films and Bone Marrow Aspirates with Annotation-free Deep Learning

Authors: Petru Manescu, Priya Narayanan, Christopher Bendkowski, Muna Elmi, Remy Claveau, Vijay Pawar, Biobele J. Brown, Mike Shaw, Anupama Rao, Delmiro Fernandez-Reyes

Abstract: While optical microscopy inspection of blood films and bone marrow aspirates by a hematologist is a crucial step in establishing diagnosis of acute leukemia, especially in low-resource settings where other diagnostic modalities might not be available, the task remains time-consuming and prone to human inconsistencies. This has an impact especially in cases of Acute Promyelocytic Leukemia (APL) tha… ▽ More While optical microscopy inspection of blood films and bone marrow aspirates by a hematologist is a crucial step in establishing diagnosis of acute leukemia, especially in low-resource settings where other diagnostic modalities might not be available, the task remains time-consuming and prone to human inconsistencies. This has an impact especially in cases of Acute Promyelocytic Leukemia (APL) that require urgent treatment. Integration of automated computational hematopathology into clinical workflows can improve the throughput of these services and reduce cognitive human error. However, a major bottleneck in deploying such systems is a lack of sufficient cell morphological object-labels annotations to train deep learning models. We overcome this by leveraging patient diagnostic labels to train weakly-supervised models that detect different types of acute leukemia. We introduce a deep learning approach, Multiple Instance Learning for Leukocyte Identification (MILLIE), able to perform automated reliable analysis of blood films with minimal supervision. Without being trained to classify individual cells, MILLIE differentiates between acute lymphoblastic and myeloblastic leukemia in blood films. More importantly, MILLIE detects APL in blood films (AUC 0.94+/-0.04) and in bone marrow aspirates (AUC 0.99+/-0.01). MILLIE is a viable solution to augment the throughput of clinical pathways that require assessment of blood film microscopy. △ Less

Submitted 20 March, 2022; originally announced March 2022.

Comments: 13 pages, 2 tables, 5 figures

MSC Class: 68T07

Set membership with two classical and quantum bit probes

Authors: Shyam Dhamapurkar, Shubham Vivek Pawar, Jaikumar Radhakrishnan

Abstract: We consider the following problem: Given a set S of at most n elements from a universe of size m, represent it in memory as a bit string so that membership queries of the form "Is x in S?" can be answered by making at most t probes into the bit string. Let s(m,n,t) be the minimum number of bits needed by any such scheme. We obtain new upper bounds for s(m,n,t=2), which match or improve all the pre… ▽ More We consider the following problem: Given a set S of at most n elements from a universe of size m, represent it in memory as a bit string so that membership queries of the form "Is x in S?" can be answered by making at most t probes into the bit string. Let s(m,n,t) be the minimum number of bits needed by any such scheme. We obtain new upper bounds for s(m,n,t=2), which match or improve all the previously known bounds. We also consider the quantum version of this problem and obtain improved upper bounds. △ Less

Submitted 30 December, 2021; originally announced December 2021.

Video Content Classification using Deep Learning

Authors: Pradyumn Patil, Vishwajeet Pawar, Yashraj Pawar, Shruti Pisal

Abstract: Video content classification is an important research content in computer vision, which is widely used in many fields, such as image and video retrieval, computer vision. This paper presents a model that is a combination of Convolutional Neural Network (CNN) and Recurrent Neural Network (RNN) which develops, trains, and optimizes a deep learning network that can identify the type of video content… ▽ More Video content classification is an important research content in computer vision, which is widely used in many fields, such as image and video retrieval, computer vision. This paper presents a model that is a combination of Convolutional Neural Network (CNN) and Recurrent Neural Network (RNN) which develops, trains, and optimizes a deep learning network that can identify the type of video content and classify them into categories such as "Animation, Gaming, natural content, flat content, etc". To enhance the performance of the model novel keyframe extraction method is included to classify only the keyframes, thereby reducing the overall processing time without sacrificing any significant performance. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: for assosiated Dataset check :- https://github.com/coin-dataset/annotations

Autonomous object harvesting using synchronized optoelectronic microrobots

Authors: Christopher Bendkowski, Laurent Mennillo, Tao Xu, Mohamed Elsayed, Filip Stojic, Harrison Edwards, Shuailong Zhang, Cindi Morshead, Vijay Pawar, Aaron R. Wheeler, Danail Stoyanov, Michael Shaw

Abstract: Optoelectronic tweezer-driven microrobots (OETdMs) are a versatile micromanipulation technology based on the use of light induced dielectrophoresis to move small dielectric structures (microrobots) across a photoconductive substrate. The microrobots in turn can be used to exert forces on secondary objects and carry out a wide range of micromanipulation operations, including collecting, transportin… ▽ More Optoelectronic tweezer-driven microrobots (OETdMs) are a versatile micromanipulation technology based on the use of light induced dielectrophoresis to move small dielectric structures (microrobots) across a photoconductive substrate. The microrobots in turn can be used to exert forces on secondary objects and carry out a wide range of micromanipulation operations, including collecting, transporting and depositing microscopic cargos. In contrast to alternative (direct) micromanipulation techniques, OETdMs are relatively gentle, making them particularly well suited to interacting with sensitive objects such as biological cells. However, at present such systems are used exclusively under manual control by a human operator. This limits the capacity for simultaneous control of multiple microrobots, reducing both experimental throughput and the possibility of cooperative multi-robot operations. In this article, we describe an approach to automated targeting and path planning to enable open-loop control of multiple microrobots. We demonstrate the performance of the method in practice, using microrobots to simultaneously collect, transport and deposit silica microspheres. Using computational simulations based on real microscopic image data, we investigate the capacity of microrobots to collect target cells from within a dissociated tissue culture. Our results indicate the feasibility of using OETdMs to autonomously carry out micromanipulation tasks within complex, unstructured environments. △ Less

Submitted 8 March, 2021; originally announced March 2021.

Comments: 7 pages, 5 figures

Docking Haptics: Extending the Reach of Haptics by Dynamic Combinations of Grounded and Worn Devices

Authors: Anthony Steed, Sebastian Friston, Vijay Pawar, David Swapp

Abstract: Grounded haptic devices can provide a variety of forces but have limited working volumes. Wearable haptic devices operate over a large volume but are relatively restricted in the types of stimuli they can generate. We propose the concept of docking haptics, in which different types of haptic devices are dynamically docked at run time. This creates a hybrid system, where the potential feedback depe… ▽ More Grounded haptic devices can provide a variety of forces but have limited working volumes. Wearable haptic devices operate over a large volume but are relatively restricted in the types of stimuli they can generate. We propose the concept of docking haptics, in which different types of haptic devices are dynamically docked at run time. This creates a hybrid system, where the potential feedback depends on the user's location. We show a prototype docking haptic workspace, combining a grounded six degree-of-freedom force feedback arm with a hand exoskeleton. We are able to create the sensation of weight on the hand when it is within reach of the grounded device, but away from the grounded device, hand-referenced force feedback is still available. A user study demonstrates that users can successfully discriminate weight when using docking haptics, but not with the exoskeleton alone. Such hybrid systems would be able to change configuration further, for example docking two grounded devices to a hand in order to deliver twice the force, or extend the working volume. We suggest that the docking haptics concept can thus extend the practical utility of haptics in user interfaces. △ Less

Submitted 22 October, 2020; v1 submitted 14 February, 2020; originally announced February 2020.

Whole-Sample Map** of Cancerous and Benign Tissue Properties

Authors: Lydia Neary-Zajiczek, Clara Essmann, Neil Clancy, Aiman Haider, Elena Miranda, Michael Shaw, Amir Gander, Brian Davidson, Delmiro Fernandez-Reyes, Vijay Pawar, Danail Stoyanov

Abstract: Structural and mechanical differences between cancerous and healthy tissue give rise to variations in macroscopic properties such as visual appearance and elastic modulus that show promise as signatures for early cancer detection. Atomic force microscopy (AFM) has been used to measure significant differences in stiffness between cancerous and healthy cells owing to its high force sensitivity and s… ▽ More Structural and mechanical differences between cancerous and healthy tissue give rise to variations in macroscopic properties such as visual appearance and elastic modulus that show promise as signatures for early cancer detection. Atomic force microscopy (AFM) has been used to measure significant differences in stiffness between cancerous and healthy cells owing to its high force sensitivity and spatial resolution, however due to absorption and scattering of light, it is often challenging to accurately locate where AFM measurements have been made on a bulk tissue sample. In this paper we describe an image registration method that localizes AFM elastic stiffness measurements with high-resolution images of haematoxylin and eosin (H\&E)-stained tissue to within 1.5 microns. Color RGB images are segmented into three structure types (lumen, cells and stroma) by a neural network classifier trained on ground-truth pixel data obtained through k-means clustering in HSV color space. Using the localized stiffness maps and corresponding structural information, a whole-sample stiffness map is generated with a region matching and interpolation algorithm that associates similar structures with measured stiffness values. We present results showing significant differences in stiffness between healthy and cancerous liver tissue and discuss potential applications of this technique. △ Less

Submitted 23 July, 2019; originally announced July 2019.

Comments: Accepted at MICCAI2019

Data-Driven Malaria Prevalence Prediction in Large Densely-Populated Urban Holoendemic sub-Saharan West Africa: Harnessing Machine Learning Approaches and 22-years of Prospectively Collected Data

Authors: Biobele J. Brown, Alexander A. Przybylski, Petru Manescu, Fabio Caccioli, Gbeminiyi Oyinloye, Muna Elmi, Michael J. Shaw, Vijay Pawar, Remy Claveau, John Shawe-Taylor, Mandayam A. Srinivasan, Nathaniel K. Afolabi, Adebola E. Orimadegun, Wasiu A. Ajetunmobi, Francis Akinkunmi, Olayinka Kowobari, Kikelomo Osinusi, Felix O. Akinbami, Samuel Omokhodion, Wuraola A. Shokunbi, Ikeoluwa Lagunju, Olugbemiro Sodeinde, Delmiro Fernandez-Reyes

Abstract: Plasmodium falciparum malaria still poses one of the greatest threats to human life with over 200 million cases globally leading to half-million deaths annually. Of these, 90% of cases and of the mortality occurs in sub-Saharan Africa, mostly among children. Although malaria prediction systems are central to the 2016-2030 malaria Global Technical Strategy, currently these are inadequate at capturi… ▽ More Plasmodium falciparum malaria still poses one of the greatest threats to human life with over 200 million cases globally leading to half-million deaths annually. Of these, 90% of cases and of the mortality occurs in sub-Saharan Africa, mostly among children. Although malaria prediction systems are central to the 2016-2030 malaria Global Technical Strategy, currently these are inadequate at capturing and estimating the burden of disease in highly endemic countries. We developed and validated a computational system that exploits the predictive power of current Machine Learning approaches on 22-years of prospective data from the high-transmission holoendemic malaria urban-densely-populated sub-Saharan West-Africa metropolis of Ibadan. Our dataset of >9x104 screened study participants attending our clinical and community services from 1996 to 2017 contains monthly prevalence, temporal, environmental and host features. Our Locality-specific Elastic-Net based Malaria Prediction System (LEMPS) achieves good generalization performance, both in magnitude and direction of the prediction, when tasked to predict monthly prevalence on previously unseen validation data (MAE<=6x10-2, MSE<=7x10-3) within a range of (+0.1 to -0.05) error-tolerance which is relevant and usable for aiding decision-support in a holoendemic setting. LEMPS is well-suited for malaria prediction, where there are multiple features which are correlated with one another, and trading-off between regularization-strength L1-norm and L2-norm allows the system to retain stability. Data-driven systems are critical for regionally-adaptable surveillance, management of control strategies and resource allocation across stretched healthcare systems. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: 40 pages, 10 figures

ACM Class: J.3; I.5.4

Deep Learning Enhanced Extended Depth-of-Field for Thick Blood-Film Malaria High-Throughput Microscopy

Authors: Petru Manescu, Lydia Neary- Zajiczek, Michael J. Shaw, Muna Elmi, Remy Claveau, Vijay Pawar, John Shawe-Taylor, Iasonas Kokkinos, Mandayam A. Srinivasan, Ikeoluwa Lagunju, Olugbemiro Sodeinde, Biobele J. Brown, Delmiro Fernandez-Reyes

Abstract: Fast accurate diagnosis of malaria is still a global health challenge for which automated digital-pathology approaches could provide scalable solutions amenable to be deployed in low-to-middle income countries. Here we address the problem of Extended Depth-of-Field (EDoF) in thick blood film microscopy for rapid automated malaria diagnosis. High magnification oil-objectives (100x) with large numer… ▽ More Fast accurate diagnosis of malaria is still a global health challenge for which automated digital-pathology approaches could provide scalable solutions amenable to be deployed in low-to-middle income countries. Here we address the problem of Extended Depth-of-Field (EDoF) in thick blood film microscopy for rapid automated malaria diagnosis. High magnification oil-objectives (100x) with large numerical aperture are usually preferred to resolve the fine structural details that help separate true parasites from distractors. However, such objectives have a very limited depth-of-field requiring the acquisition of a series of images at different focal planes per field of view (FOV). Current EDoF techniques based on multi-scale decompositions are time consuming and therefore not suited for high-throughput analysis of specimens. To overcome this challenge, we developed a new deep learning method based on Convolutional Neural Networks (EDoF-CNN) that is able to rapidly perform the extended depth-of-field while also enhancing the spatial resolution of the resulting fused image. We evaluated our approach using simulated low-resolution z-stacks from Giemsa-stained thick blood smears from patients presenting with Plasmodium falciparum malaria. The EDoF-CNN allows speed-up of our digital-pathology acquisition platform and significantly improves the quality of the EDoF compared to the traditional multi-scaled approaches when applied to lower resolution stacks corresponding to acquisitions with fewer focal planes, large camera pixel binning or lower magnification objectives (larger FOV). We use the parasite detection accuracy of a deep learning model on the EDoFs as a concrete, task-specific measure of performance of this approach. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: 10 pages, 4 figures

Design and Development of Underwater Vehicle: ANAHITA

Authors: Akash Jain, Manish Kumar, Rithvik Patibandla, Balamurugan R, Naveen Chandra R, Abhinav Arora, Akash K Singh, Varun Pawar, Aditya Rai, Medha Agarwal, Priank Prasad, Vandit Sanadhya, Prateek Yadav, Inshu Namdev, Nilay Shah, Saksham Mittal, Ayush Gupta, Naman Agarwal, Mangal Kothari

Abstract: Anahita is an autonomous underwater vehicle which is currently being developed by interdisciplinary team of students at Indian Institute of Technology(IIT) Kanpur with aim to provide a platform for research in AUV to undergraduate students. This is the second vehicle which is being designed by AUV-IITK team to participate in 6th NIOT-SAVe competition organized by the National Institute of Ocean Te… ▽ More Anahita is an autonomous underwater vehicle which is currently being developed by interdisciplinary team of students at Indian Institute of Technology(IIT) Kanpur with aim to provide a platform for research in AUV to undergraduate students. This is the second vehicle which is being designed by AUV-IITK team to participate in 6th NIOT-SAVe competition organized by the National Institute of Ocean Technology, Chennai. The Vehicle has been completely redesigned with the major improvements in modularity and ease of access of all the components, kee** the design very compact and efficient. New advancements in the vehicle include, power distribution system and monitoring system. The sensors include the inertial measurement units (IMU), hydrophone array, a depth sensor, and two RGB cameras. The current vehicle features hot swappable battery pods giving a huge advantage over the previous vehicle, for longer runtime. △ Less

Submitted 1 October, 2021; v1 submitted 1 March, 2019; originally announced March 2019.

Comments: Added new co-author name