Showing 1–4 of 4 results for author: Partyka, A

Millimeter Wave MIMO Prototype: Measurements and Experimental Results

Authors: Vasanthan Raghavan, Andrzej Partyka, Ashwin Sampath, Sundar Subramanian, Ozge Hizir Koymen, Kobi Ravid, Juergen Cezanne, Kiran Mukkavilli, Junyi Li

Abstract: Millimeter-wave multi-input multi-output (mm-Wave MIMO) systems are one of the candidate schemes for 5G wireless standardization efforts. In this context, the main contributions of this article are three-fold. 1) We describe parallel sets of measurements at identical transmit-receive location pairs with 2.9, 29 and 61 GHz carrier frequencies in indoor office, shop** mall, and outdoor settings. T… ▽ More Millimeter-wave multi-input multi-output (mm-Wave MIMO) systems are one of the candidate schemes for 5G wireless standardization efforts. In this context, the main contributions of this article are three-fold. 1) We describe parallel sets of measurements at identical transmit-receive location pairs with 2.9, 29 and 61 GHz carrier frequencies in indoor office, shop** mall, and outdoor settings. These measurements provide insights on propagation, blockage and material penetration losses, and the key elements necessary in system design to make mm-Wave systems viable in practice. 2) One of these elements is hybrid beamforming necessary for better link margins by rea** the array gain with large antenna dimensions. From the class of fully-flexible hybrid beamformers, we describe a robust class of directional beamformers towards meeting the high data-rate requirements of mm-Wave systems. 3) Leveraging these design insights, we then describe an experimental prototype system at 28 GHz that realizes high data-rates on both the downlink and uplink and robustly maintains these rates in outdoor and indoor mobility scenarios. In addition to maintaining large signal constellation sizes in spite of radio frequency challenges, this prototype leverages the directional nature of the mm-Wave channel to perform seamless beam switching and handover across mm-Wave base-stations thereby overcoming the path losses in non-line-of-sight links and blockages encountered at mm-Wave frequencies. △ Less

Submitted 25 October, 2017; originally announced October 2017.

Comments: 15 pages, 5 figures, 1 table, Accepted for publication at the IEEE Communications Magazine

Millimeter Wave Channel Measurements and Implications for PHY Layer Design

Authors: Vasanthan Raghavan, Andrzej Partyka, Lida Akhoondzadehasl, Ali Tassoudji, Ozge Koymen, John Sanelli

Abstract: There has been an increasing interest in the millimeter wave (mmW) frequency regime in the design of next-generation wireless systems. The focus of this work is on understanding mmW channel properties that have an important bearing on the feasibility of mmW systems in practice and have a significant impact on physical (PHY) layer design. In this direction, simultaneous channel sounding measurement… ▽ More There has been an increasing interest in the millimeter wave (mmW) frequency regime in the design of next-generation wireless systems. The focus of this work is on understanding mmW channel properties that have an important bearing on the feasibility of mmW systems in practice and have a significant impact on physical (PHY) layer design. In this direction, simultaneous channel sounding measurements at 2.9, 29 and 61 GHz are performed at a number of transmit-receive location pairs in indoor office, shop** mall and outdoor environments. Based on these measurements, this paper first studies large-scale properties such as path loss and delay spread across different carrier frequencies in these scenarios. Towards the goal of understanding the feasibility of outdoor-to-indoor coverage, material measurements corresponding to mmW reflection and penetration are studied and significant notches in signal reception spread over a few GHz are reported. Finally, implications of these measurements on system design are discussed and multiple solutions are proposed to overcome these impairments. △ Less

Submitted 16 September, 2017; originally announced September 2017.

Comments: 13 pages, 8 figures, Accepted for publication at the IEEE Transactions on Antennas and Propagation

Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications

Authors: Shu Sun, Theodore S. Rappaport, Timothy A. Thomas, Amitava Ghosh, Huan C. Nguyen, Istvan Z. Kovacs, Ignacio Rodriguez, Ozge Koymen, Andrzej Partyka

Abstract: This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3G… ▽ More This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3GPP, and for use in the design of fifth generation (5G) wireless systems in urban macrocell, urban microcell, and indoor office and shop** mall scenarios. Here we compare the accuracy and sensitivity of these models using measured data from 30 propagation measurement datasets from 2 GHz to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity analyses of the three models show that the physically-based two-parameter CI model and three-parameter CIF model offer computational simplicity, have very similar goodness of fit (i.e., the shadow fading standard deviation), exhibit more stable model parameter behavior across frequencies and distances, and yield smaller prediction error in sensitivity testing across distances and frequencies, when compared to the four-parameter ABG model. Results show the CI model with a 1 m close-in reference distance is suitable for outdoor environments, while the CIF model is more appropriate for indoor modeling. The CI and CIF models are easily implemented in existing 3GPP models by making a very subtle modification -- by replacing a floating non-physically based constant with a frequency-dependent constant that represents free space path loss in the first meter of propagation. △ Less

Submitted 10 June, 2016; v1 submitted 14 March, 2016; originally announced March 2016.

Comments: Open access available at: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7434656

Propagation Path Loss Models for 5G Urban Micro- and Macro-Cellular Scenarios

Authors: Shu Sun, Theodore S. Rappaport, Sundeep Rangan, Timothy A. Thomas, Amitava Ghosh, Istvan Z. Kovacs, Ignacio Rodriguez, Ozge Koymen, Andrzej Partyka, Jan Jarvelainen

Abstract: This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro- and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing… ▽ More This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro- and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing studies from 2 GHz to 73.5 GHz over distances ranging from 5 m to 1429 m. The results show that the one-parameter CI model has a very similar goodness of fit (i.e., the shadow fading standard deviation) in both line-of-sight and non-line-of-sight environments, while offering substantial simplicity and more stable behavior across frequencies and distances, as compared to the three-parameter ABG model. Additionally, the CI model needs only one very subtle and simple modification to the existing 3GPP floating-intercept path loss model (replacing a constant with a close-in free space reference value) in order to provide greater simulation accuracy, more simplicity, better repeatability across experiments, and higher stability across a vast range of frequencies. △ Less

Submitted 23 February, 2016; v1 submitted 23 November, 2015; originally announced November 2015.

Comments: in 2016 IEEE 83rd Vehicular Technology Conference (VTC2016-Spring), May 2016, Nan**g, China