Showing 1–50 of 55 results for author: Okamura, A M

Spatial Summation of Localized Pressure for Haptic Sensory Prostheses

Authors: Sreela Kodali, Cihualpilli Camino Cruz, Thomas C. Bulea, Kevin S. Rao Diana Bharucha-Goebel, Alexander T. Chesler, Carsten G. Bonnemann, Allison M. Okamura

Abstract: A host of medical conditions, including amputations, diabetes, stroke, and genetic disease, result in loss of touch sensation. Because most types of sensory loss have no pharmacological treatment or rehabilitative therapy, we propose a haptic sensory prosthesis that provides substitutive feedback. The wrist and forearm are compelling locations for feedback due to available skin area and not occlud… ▽ More A host of medical conditions, including amputations, diabetes, stroke, and genetic disease, result in loss of touch sensation. Because most types of sensory loss have no pharmacological treatment or rehabilitative therapy, we propose a haptic sensory prosthesis that provides substitutive feedback. The wrist and forearm are compelling locations for feedback due to available skin area and not occluding the hands, but have reduced mechanoreceptor density compared to the fingertips. Focusing on localized pressure as the feedback modality, we hypothesize that we can improve on prior devices by invoking a wider range of stimulus intensity using multiple points of pressure to evoke spatial summation, which is the cumulative perceptual experience from multiple points of stimuli. We conducted a preliminary perceptual test to investigate this idea and found that just noticeable difference is reduced with two points of pressure compared to one, motivating future work using spatial summation in sensory prostheses. △ Less

Submitted 3 April, 2024; originally announced April 2024.

Comments: 2 pages, 2 figures, 2024 IEEE Haptics Symposium Work-in-Progress Paper

phloSAR: a Portable, High-Flow Pressure Supply and Regulator Enabling Untethered Operation of Large Pneumatic Soft Robots

Authors: Maxwell Ahlquist, Rianna Jitosho, Jiawen Bao, Allison M. Okamura

Abstract: Pneumatic actuation benefits soft robotics by facilitating compliance, enabling large volume change, and concentrating actuator weight away from the end-effector. However, portability is compromised when pneumatic actuators are tethered to cumbersome air and power supplies. While there are existing options for portable pneumatic systems, they are limited in dynamic capabilities, constraining their… ▽ More Pneumatic actuation benefits soft robotics by facilitating compliance, enabling large volume change, and concentrating actuator weight away from the end-effector. However, portability is compromised when pneumatic actuators are tethered to cumbersome air and power supplies. While there are existing options for portable pneumatic systems, they are limited in dynamic capabilities, constraining their applicability to low pressure and/or small-volume soft robots. In this work, we propose a portable, high-flow pressure supply and regulator (phloSAR) for use in untethered, weight-constrained, dynamic soft robot applications. PhloSAR leverages high-flow proportional valves, an integrated pressure reservoir, and Venturi vacuum generation to achieve portability and dynamic performance. We present a set of models that describe the system dynamics, experimentally validate them on physical hardware, and discuss the influence of design parameters on system operation. Lastly, we integrate a proof-of-concept prototype with a soft robot arm mounted on an aerial vehicle to demonstrate the system's applicability to mobile robotics. Our system enables new opportunities in mobile soft robotics by making untethered pneumatic supply and regulation available to a wider range of soft robots. △ Less

Submitted 1 March, 2024; originally announced March 2024.

Comments: 2024 IEEE International Conference on Soft Robotics

Reliability of Smartphone-Based Vibration Threshold Measurements

Authors: Rachel A. G. Adenekan, Kyle T. Yoshida, Anis Benyoucef, Alejandrina Gonzalez Reyes, Adeyinka E. Adenekan, Allison M. Okamura, Cara M. Nunez

Abstract: Smartphone-based measurement platforms can collect data on human sensory function in an accessible manner. We developed a smartphone app that measures vibration perception thresholds by commanding vibrations with varying amplitudes and recording user responses via (1) a staircase method that adjusts a variable stimulus, and (2) a decay method that measures the time a user feels a decaying stimulus… ▽ More Smartphone-based measurement platforms can collect data on human sensory function in an accessible manner. We developed a smartphone app that measures vibration perception thresholds by commanding vibrations with varying amplitudes and recording user responses via (1) a staircase method that adjusts a variable stimulus, and (2) a decay method that measures the time a user feels a decaying stimulus. We conducted two studies with healthy adults to assess the reliability and usability of the app when the smartphone was applied to the hand and foot. The staircase mode had good reliability for repeated measurements, both with and without the support of an in-person experimenter. The app has the potential to be used at home in unguided scenarios. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Comments: 9 pages, 5 figures, To be published in IEEE Haptics Symposium 2024

MSC Class: J.2

A Comparative Analysis of Smartphone and Standard Tools for Touch Perception Assessment Across Multiple Body Sites

Authors: Rachel A. G. Adenekan, Alejandrina Gonzalez Reyes, Kyle T. Yoshida, Sreela Kodali, Allison M. Okamura, Cara M. Nunez

Abstract: Tactile perception plays an important role in activities of daily living, and it can be impaired in individuals with certain medical conditions. The most common tools used to assess tactile sensation, the Semmes-Weinstein monofilaments and the 128 Hz tuning fork, have poor repeatability and resolution. Long term, we aim to provide a repeatable, high-resolution testing platform that can be used to… ▽ More Tactile perception plays an important role in activities of daily living, and it can be impaired in individuals with certain medical conditions. The most common tools used to assess tactile sensation, the Semmes-Weinstein monofilaments and the 128 Hz tuning fork, have poor repeatability and resolution. Long term, we aim to provide a repeatable, high-resolution testing platform that can be used to assess vibrotactile perception through smartphones without the need for an experimenter to be present to conduct the test. We present a smartphone-based vibration perception measurement platform and compare its performance to measurements from standard monofilament and tuning fork tests. We conducted a user study with 36 healthy adults in which we tested each tool on the hand, wrist, and foot, to assess how well our smartphone-based vibration perception thresholds (VPTs) detect known trends obtained from standard tests. The smartphone platform detected statistically significant changes in VPT between the index finger and foot and also between the feet of younger adults and older adults. Our smartphone-based VPT had a moderate correlation to tuning fork-based VPT. Our overarching objective is to develop an accessible smartphone-based platform that can eventually be used to measure disease progression and regression. △ Less

Submitted 25 January, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Comments: Accepted for publication in IEEE Transactions on Haptics 2024

MSC Class: J.2

Haptic Guidance and Haptic Error Amplification in a Virtual Surgical Robotic Training Environment

Authors: Yousi A. Oquendo, Margaret M. Coad, Sherry M. Wren, Thomas S. Lendvay, Ilana Nisky, Anthony M. Jarc, Allison M. Okamura, Zonghe Chua

Abstract: Teleoperated robotic systems have introduced more intuitive control for minimally invasive surgery, but the optimal method for training remains unknown. Recent motor learning studies have demonstrated that exaggeration of errors helps trainees learn to perform tasks with greater speed and accuracy. We hypothesized that training in a force field that pushes the operator away from a desired path wou… ▽ More Teleoperated robotic systems have introduced more intuitive control for minimally invasive surgery, but the optimal method for training remains unknown. Recent motor learning studies have demonstrated that exaggeration of errors helps trainees learn to perform tasks with greater speed and accuracy. We hypothesized that training in a force field that pushes the operator away from a desired path would improve their performance on a virtual reality ring-on-wire task. Forty surgical novices trained under a no-force, guidance, or error-amplifying force field over five days. Completion time, translational and rotational path error, and combined error-time were evaluated under no force field on the final day. The groups significantly differed in combined error-time, with the guidance group performing the worst. Error-amplifying field participants showed the most improvement and did not plateau in their performance during training, suggesting that learning was still ongoing. Guidance field participants had the worst performance on the final day, confirming the guidance hypothesis. Participants with high initial path error benefited more from guidance. Participants with high initial combined error-time benefited more from guidance and error-amplifying force field training. Our results suggest that error-amplifying and error-reducing haptic training for robot-assisted telesurgery benefits trainees of different abilities differently. △ Less

Submitted 10 September, 2023; originally announced September 2023.

Comments: 11 pages, 7 Figure, Under Review

Stiffness Change for Reconfiguration of Inflated Beam Robots

Authors: Brian H. Do, Shuai Wu, Ruike Renee Zhao, Allison M. Okamura

Abstract: Active control of the shape of soft robots is challenging. Despite having an infinite number of passive degrees of freedom (DOFs), soft robots typically only have a few actively controllable DOFs, limited by the number of degrees of actuation (DOAs). The complexity of actuators restricts the number of DOAs that can be incorporated into soft robots. Active shape control is further complicated by th… ▽ More Active control of the shape of soft robots is challenging. Despite having an infinite number of passive degrees of freedom (DOFs), soft robots typically only have a few actively controllable DOFs, limited by the number of degrees of actuation (DOAs). The complexity of actuators restricts the number of DOAs that can be incorporated into soft robots. Active shape control is further complicated by the buckling of soft robots under compressive forces; this is particularly challenging for compliant continuum robots due to their long aspect ratios. In this work, we show how variable stiffness can enable shape control of soft robots by addressing these challenges. Dynamically changing the stiffness of sections along a compliant continuum robot can selectively "activate" discrete joints. By changing which joints are activated, the output of a single actuator can be reconfigured to actively control many different joints, thus decoupling the number of controllable DOFs from the number of DOAs. We demonstrate embedded positive pressure layer jamming as a simple method for stiffness change in inflated beam robots, its compatibility with growing robots, and its use as an "activating" technology. We experimentally characterize the stiffness change in a growing inflated beam robot and present finite element models which serve as guides for robot design and fabrication. We fabricate a multi-segment everting inflated beam robot and demonstrate how stiffness change is compatible with growth through tip eversion, enables an increase in workspace, and achieves new actuation patterns not possible without stiffening. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Finite Element Modeling of Pneumatic Bending Actuators for Inflated-Beam Robots

Authors: Cosima du Pasquier, Sehui Jeong, Allison M. Okamura

Abstract: Inflated-beam soft robots, such as tip-everting vine robots, can control curvature by contracting one beam side via pneumatic actuation. This work develops a general finite element modeling approach to characterize their bending. The model is validated across four pneumatic actuator types (series, compression, embedded, and fabric pneumatic artificial muscles), and can be extended to other designs… ▽ More Inflated-beam soft robots, such as tip-everting vine robots, can control curvature by contracting one beam side via pneumatic actuation. This work develops a general finite element modeling approach to characterize their bending. The model is validated across four pneumatic actuator types (series, compression, embedded, and fabric pneumatic artificial muscles), and can be extended to other designs. These actuators employ two bending mechanisms: geometry-based contraction and material-based contraction. The model accounts for intricate nonlinear effects of buckling and anisotropy. Experimental validation includes three working pressures (10, 20, and 30 kPa) for each actuator type. Geometry-based contraction yields significant deformation (92.1% accuracy) once the buckling pattern forms, reducing slightly to 80.7% accuracy at lower pressures due to stress singularities during buckling. Material-based contraction achieves smaller bending angles but remains at least 96.7% accurate. The open source models available at http://www.vinerobots.org support designing inflated-beam robots like tip-everting vine robots, contributing to waste reduction by optimizing designs based on material properties and stress distribution for effective bending and stress management. △ Less

Submitted 29 September, 2023; v1 submitted 6 June, 2023; originally announced June 2023.

Wearable Sensory Substitution for Proprioception via Deep Pressure

Authors: Sreela Kodali, Brian B. Vuong, Thomas. C. Bulea, Alexander T. Chesler, Carsten G. Bönnemann, Allison M. Okamura

Abstract: We propose a sensory substitution device that communicates one-degree-of-freedom proprioceptive feedback via deep pressure stimulation on the arm. The design is motivated by the need for a feedback modality detectable by individuals with a genetic condition known as PIEZO2 loss of function, which is characterized by absence of both proprioception and sense of light touch. We created a wearable and… ▽ More We propose a sensory substitution device that communicates one-degree-of-freedom proprioceptive feedback via deep pressure stimulation on the arm. The design is motivated by the need for a feedback modality detectable by individuals with a genetic condition known as PIEZO2 loss of function, which is characterized by absence of both proprioception and sense of light touch. We created a wearable and programmable prototype that applies up to 15 N of deep pressure stimulation to the forearm and includes an embedded force sensor. We conducted a study to evaluate the ability of participants without sensory impairment to control the position of a virtual arm to match a target angle communicated by deep pressure stimulation. A participant-specific calibration resulted in an average minimum detectable force of 0.41 N and maximum comfortable force of 6.42 N. We found that, after training, participants were able to significantly reduce angle error using the deep pressure haptic feedback compared to without it. Angle error increased only slightly with force, indicating that this sensory substitution method is a promising approach for individuals with PIEZO2 loss of function and other forms of sensory loss. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: 6 pages, 9 figures, IEEE World Haptics Conference 2023

Configuration and Fabrication of Preformed Vine Robots

Authors: Nathaniel Agharese, Allison M. Okamura

Abstract: Vine robots are a class of soft continuum robots that grow via tip eversion, allowing them to move their tip without relying on reaction forces from the environment. Constructed from compliant materials such as fabric and thin, flexible plastic, these robots are able to grow many times their original length with the use of fluidic pressure. They can be mechanically programmed/preformed to follow a… ▽ More Vine robots are a class of soft continuum robots that grow via tip eversion, allowing them to move their tip without relying on reaction forces from the environment. Constructed from compliant materials such as fabric and thin, flexible plastic, these robots are able to grow many times their original length with the use of fluidic pressure. They can be mechanically programmed/preformed to follow a desired path during growth by changing the structure of their body prior to deployment. We present a model for fabricating preformed vine robots with discrete bends. We apply this model across combinations of three fabrication methods and two materials. One fabrication method, ta** folds into the robot body, is from the literature. The other two methods, welding folds and connecting fasteners embedded in the robot body, are novel. Measurements show the ability of the resulting vine robots to follow a desired path and show that fabrication method has a significant impact. Results include bend angles with as little as 0.12 degrees of error, and segment lengths with as low as 0.36 mm of error. The required growth pressure and average growth speed of these preformed vine robots ranged from 11.5 to 23.7kPA and 3.75 to 10 cm/s, respectively. These results validate the use of preformed vine robots for deployment along known paths, and serve as a guide for choosing a fabrication method and material combination based on the specific needs of the task. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Exploring Human Response Times to Combinations of Audio, Haptic, and Visual Stimuli from a Mobile Device

Authors: Kyle T. Yoshida, Joel X. Kiernan, Allison M. Okamura, Cara M. Nunez

Abstract: Auditory, haptic, and visual stimuli provide alerts, notifications, and information for a wide variety of applications ranging from virtual reality to wearable and hand-held devices. Response times to these stimuli have been used to assess motor control and design human-computer interaction systems. In this study, we investigate human response times to 26 combinations of auditory, haptic, and visu… ▽ More Auditory, haptic, and visual stimuli provide alerts, notifications, and information for a wide variety of applications ranging from virtual reality to wearable and hand-held devices. Response times to these stimuli have been used to assess motor control and design human-computer interaction systems. In this study, we investigate human response times to 26 combinations of auditory, haptic, and visual stimuli at three levels (high, low, and off). We developed an iOS app that presents these stimuli in random intervals and records response times on an iPhone 11. We conducted a user study with 20 participants and found that response time decreased with more types and higher levels of stimuli. The low visual condition had the slowest mean response time (mean +/- standard deviation, 528 +/- 105 ms) and the condition with high levels of audio, haptic, and visual stimuli had the fastest mean response time (320 +/- 43 ms). This work quantifies response times to multi-modal stimuli, identifies interactions between different stimuli types and levels, and introduces an app-based method that can be widely distributed to measure response time. Understanding preferences and response times for stimuli can provide insight into designing devices for human-machine interaction. △ Less

Submitted 26 May, 2023; originally announced May 2023.

Comments: Accepted to World Haptics Conference 2023

Cognitive and Physical Activities Impair Perception of Smartphone Vibrations

Authors: Kyle T. Yoshida, Joel X. Kiernan, Rachel A. G. Adenekan, Steven H. Trinh, Alexis J. Lowber, Allison M. Okamura, Cara M. Nunez

Abstract: Vibration feedback is common in everyday devices, from virtual reality systems to smartphones. However, cognitive and physical activities may impede our ability to sense vibrations from devices. In this study, we develop and characterize a smartphone platform to investigate how a shape-memory task (cognitive activity) and walking (physical activity) impair human perception of smartphone vibrations… ▽ More Vibration feedback is common in everyday devices, from virtual reality systems to smartphones. However, cognitive and physical activities may impede our ability to sense vibrations from devices. In this study, we develop and characterize a smartphone platform to investigate how a shape-memory task (cognitive activity) and walking (physical activity) impair human perception of smartphone vibrations. We measured how Apple's Core Haptics Framework parameters can be used for haptics research, namely how hapticIntensity modulates amplitudes of 230 Hz vibrations. A 23-person user study found that physical (p<0.001) and cognitive (p=0.004) activity increase vibration perception thresholds. Cognitive activity also increases vibration response time (p<0.001). This work also introduces a smartphone platform that can be used for out-of-lab vibration perception testing. Researchers can use our smartphone platform and results to design better haptic devices for diverse, unique populations. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: To be published in IEEE Transactions on Haptics

A Comparison of Pneumatic Actuators for Soft Growing Vine Robots

Authors: Alexander M. Kübler, Cosima du Pasquier, Andrew Low, Betim Djambazi, Nicolas Aymon, Julian Förster, Nathaniel Agharese, Roland Siegwart, Allison M. Okamura

Abstract: Soft pneumatic actuators are used to steer soft growing "vine" robots while being flexible enough to undergo the tip eversion required for growth. In this study, we compared the performance of three types of pneumatic actuators in terms of their ability to perform eversion, quasi-static bending, dynamic motion, and force output: the pouch motor, the cylindrical pneumatic artificial muscle (cPAM),… ▽ More Soft pneumatic actuators are used to steer soft growing "vine" robots while being flexible enough to undergo the tip eversion required for growth. In this study, we compared the performance of three types of pneumatic actuators in terms of their ability to perform eversion, quasi-static bending, dynamic motion, and force output: the pouch motor, the cylindrical pneumatic artificial muscle (cPAM), and the fabric pneumatic artificial muscle (fPAM). The pouch motor is advantageous for prototy** due to its simple manufacturing process. The cPAM exhibits superior bending behavior and produces the highest forces, while the fPAM actuates fastest and everts at the lowest pressure. We evaluated a range of dimensions for each actuator type. Larger actuators can produce more significant deformations and forces, but smaller actuators inflate faster and can evert at a lower pressure. Because vine robots are lightweight, the effect of gravity on the functionality of different actuators is minimal. We developed a new analytical model that predicts the pressure-to-bending behavior of vine robot actuators. Using the actuator results, we designed and demonstrated a 4.8 m long vine robot equipped with highly maneuverable 60x60 mm cPAMs in a three-dimensional obstacle course. The vine robot was able to move around sharp turns, travel through a passage smaller than its diameter, and lift itself against gravity. △ Less

Submitted 15 September, 2023; v1 submitted 1 May, 2023; originally announced May 2023.

Comments: 13 pages, 8 figures, 3 tables

Passive Shape Locking for Multi-Bend Growing Inflated Beam Robots

Authors: Rianna Jitosho, Sofia Simon-Trench, Allison M. Okamura, Brian H. Do

Abstract: Shape change enables new capabilities for robots. One class of robots capable of dramatic shape change is soft growing "vine" robots. These robots usually feature global actuation methods for bending that limit them to simple, constant-curvature shapes. Achieving more complex "multi-bend" configurations has also been explored but requires choosing the desired configuration ahead of time, exploitin… ▽ More Shape change enables new capabilities for robots. One class of robots capable of dramatic shape change is soft growing "vine" robots. These robots usually feature global actuation methods for bending that limit them to simple, constant-curvature shapes. Achieving more complex "multi-bend" configurations has also been explored but requires choosing the desired configuration ahead of time, exploiting contact with the environment to maintain previous bends, or using pneumatic actuation for shape locking. In this paper, we present a novel design that enables passive, on-demand shape locking. Our design leverages a passive tip mount to apply hook-and-loop fasteners that hold bends without any pneumatic or electrical input. We characterize the robot's kinematics and ability to hold locked bends. We also experimentally evaluate the effect of hook-and-loop fasteners on beam and joint stiffness. Finally, we demonstrate our proof-of-concept prototype in 2D. Our passive shape locking design is a step towards easily reconfigurable robots that are lightweight, low-cost, and low-power. △ Less

Submitted 4 March, 2023; originally announced March 2023.

Comments: Accepted to RoboSoft 2023

Development and Evaluation of a Learning-based Model for Real-time Haptic Texture Rendering

Authors: Negin Heravi, Heather Culbertson, Allison M. Okamura, Jeannette Bohg

Abstract: Current Virtual Reality (VR) environments lack the rich haptic signals that humans experience during real-life interactions, such as the sensation of texture during lateral movement on a surface. Adding realistic haptic textures to VR environments requires a model that generalizes to variations of a user's interaction and to the wide variety of existing textures in the world. Current methodologies… ▽ More Current Virtual Reality (VR) environments lack the rich haptic signals that humans experience during real-life interactions, such as the sensation of texture during lateral movement on a surface. Adding realistic haptic textures to VR environments requires a model that generalizes to variations of a user's interaction and to the wide variety of existing textures in the world. Current methodologies for haptic texture rendering exist, but they usually develop one model per texture, resulting in low scalability. We present a deep learning-based action-conditional model for haptic texture rendering and evaluate its perceptual performance in rendering realistic texture vibrations through a multi part human user study. This model is unified over all materials and uses data from a vision-based tactile sensor (GelSight) to render the appropriate surface conditioned on the user's action in real time. For rendering texture, we use a high-bandwidth vibrotactile transducer attached to a 3D Systems Touch device. The result of our user study shows that our learning-based method creates high-frequency texture renderings with comparable or better quality than state-of-the-art methods without the need for learning a separate model per texture. Furthermore, we show that the method is capable of rendering previously unseen textures using a single GelSight image of their surface. △ Less

Submitted 24 March, 2024; v1 submitted 26 December, 2022; originally announced December 2022.

Comments: Accepted for publication in IEEE Transactions on Haptics 2024. 12 pages, 8 figures

A Multi-Segment, Soft Growing Robot with Selective Steering

Authors: Alexander M. Kübler, Sebastián Urdaneta Rivera, Frances B. Raphael, Julian Förster, Roland Siegwart, Allison M. Okamura

Abstract: Everting, soft growing vine robots benefit from reduced friction with their environment, which allows them to navigate challenging terrain. Vine robots can use air pouches attached to their sides for lateral steering. However, when all pouches are serially connected, the whole robot can only perform one constant curvature in free space. It must contact the environment to navigate through obstacles… ▽ More Everting, soft growing vine robots benefit from reduced friction with their environment, which allows them to navigate challenging terrain. Vine robots can use air pouches attached to their sides for lateral steering. However, when all pouches are serially connected, the whole robot can only perform one constant curvature in free space. It must contact the environment to navigate through obstacles along paths with multiple turns. This work presents a multi-segment vine robot that can navigate complex paths without interacting with its environment. This is achieved by a new steering method that selectively actuates each single pouch at the tip, providing high degrees of freedom with few control inputs. A small magnetic valve connects each pouch to a pressure supply line. A motorized tip mount uses an interlocking mechanism and motorized rollers on the outer material of the vine robot. As each valve passes through the tip mount, a permanent magnet inside the tip mount opens the valve so the corresponding pouch is connected to the pressure supply line at the same moment. Novel cylindrical pneumatic artificial muscles (cPAMs) are integrated into the vine robot and inflate to a cylindrical shape for improved bending characteristics compared to other state-of-the-art vine robots. The motorized tip mount controls a continuous eversion speed and enables controlled retraction. A final prototype was able to repeatably grow into different shapes and hold these shapes. We predict the path using a model that assumes a piecewise constant curvature along the outside of the multi-segment vine robot. The proposed multi-segment steering method can be extended to other soft continuum robot designs. △ Less

Submitted 5 March, 2023; v1 submitted 7 December, 2022; originally announced December 2022.

Comments: Accepted for presentation at the 6th IEEE-RAS International Conference on Soft Robotics (RoboSoft 2023). 7 pages, 12 figures. For associated video, see ancillary files

A Modular 3-Degree-of-Freedom Force Sensor for Robot-assisted Minimally Invasive Surgery Research

Authors: Zonghe Chua, Allison M. Okamura

Abstract: Effective force modulation during tissue manipulation is important for ensuring safe robot-assisted minimally invasive surgery (RMIS). Strict requirements for in-vivo distal force sensing have led to prior sensor designs that trade off ease of manufacture and integration against force measurement accuracy along the tool axis. These limitations have made collecting high-quality 3-degree-of-freedom… ▽ More Effective force modulation during tissue manipulation is important for ensuring safe robot-assisted minimally invasive surgery (RMIS). Strict requirements for in-vivo distal force sensing have led to prior sensor designs that trade off ease of manufacture and integration against force measurement accuracy along the tool axis. These limitations have made collecting high-quality 3-degree-of-freedom (3-DoF) bimanual force data in RMIS inaccessible to researchers. We present a modular and manufacturable 3-DoF force sensor that integrates easily with an existing RMIS tool. We achieve this by relaxing biocompatibility and sterilizability requirements while utilizing commercial load cells and common electromechanical fabrication techniques. The sensor has a range of +-5 N axially and +-3 N laterally with average root mean square errors(RMSEs) of below 0.15 N in all directions. During teleoperated mock tissue manipulation tasks, a pair of jaw-mounted sensors achieved average RMSEs of below 0.15 N in all directions. For grip force, it achieved an RMSE of 0.156 N. The sensor has sufficient accuracy within the range of forces found in delicate manipulation tasks, with potential use in bimanual haptic feedback and robotic force control. As an open-source design, the sensors can be adapted to suit additional robotic applications outside of RMIS. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: 8 pages, 11 figures

Deep Learning Classification of Touch Gestures Using Distributed Normal and Shear Force

Authors: Hojung Choi, Dane Brouwer, Michael A. Lin, Kyle T. Yoshida, Carine Rognon, Benjamin Stephens-Fripp, Allison M. Okamura, Mark R. Cutkosky

Abstract: When humans socially interact with another agent (e.g., human, pet, or robot) through touch, they do so by applying varying amounts of force with different directions, locations, contact areas, and durations. While previous work on touch gesture recognition has focused on the spatio-temporal distribution of normal forces, we hypothesize that the addition of shear forces will permit more reliable c… ▽ More When humans socially interact with another agent (e.g., human, pet, or robot) through touch, they do so by applying varying amounts of force with different directions, locations, contact areas, and durations. While previous work on touch gesture recognition has focused on the spatio-temporal distribution of normal forces, we hypothesize that the addition of shear forces will permit more reliable classification. We present a soft, flexible skin with an array of tri-axial tactile sensors for the arm of a person or robot. We use it to collect data on 13 touch gesture classes through user studies and train a Convolutional Neural Network (CNN) to learn spatio-temporal features from the recorded data. The network achieved a recognition accuracy of 74% with normal and shear data, compared to 66% using only normal force data. Adding distributed shear data improved classification accuracy for 11 out of 13 touch gesture classes. △ Less

Submitted 30 September, 2022; originally announced October 2022.

Haptic Feedback Relocation from the Fingertips to the Wrist for Two-Finger Manipulation in Virtual Reality

Authors: Jasmin E. Palmer, Mine Sarac, Aaron A. Garza, Allison M. Okamura

Abstract: Relocation of haptic feedback from the fingertips to the wrist has been considered as a way to enable haptic interaction with mixed reality virtual environments while leaving the fingers free for other tasks. We present a pair of wrist-worn tactile haptic devices and a virtual environment to study how various map**s between fingers and tactors affect task performance. The haptic feedback rendere… ▽ More Relocation of haptic feedback from the fingertips to the wrist has been considered as a way to enable haptic interaction with mixed reality virtual environments while leaving the fingers free for other tasks. We present a pair of wrist-worn tactile haptic devices and a virtual environment to study how various map**s between fingers and tactors affect task performance. The haptic feedback rendered to the wrist reflects the interaction forces occurring between a virtual object and virtual avatars controlled by the index finger and thumb. We performed a user study comparing four different finger-to-tactor haptic feedback map**s and one no-feedback condition as a control. We evaluated users' ability to perform a simple pick-and-place task via the metrics of task completion time, path length of the fingers and virtual cube, and magnitudes of normal and shear forces at the fingertips. We found that multiple map**s were effective, and there was a greater impact when visual cues were limited. We discuss the limitations of our approach and describe next steps toward multi-degree-of-freedom haptic rendering for wrist-worn devices to improve task performance in virtual environments. △ Less

Submitted 14 November, 2022; v1 submitted 15 September, 2022; originally announced September 2022.

Comments: 6 pages, 9 figures, 1 table, submitted and accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2022 Conference

Between-Tactor Display Using Dynamic Tactile Stimuli

Authors: Ryo Eguchi, David Vacek, Cole Godzinski, Silvia Curry, Max Evans, Allison M. Okamura

Abstract: Display of illusory vibration locations between physical vibrotactile motors (tactors) placed on the skin has the potential to reduce the number of tactors in distributed tactile displays. This paper presents a between-tactor display method that uses dynamic tactile stimuli to generate illusory vibration locations. A belt with only 6 vibration motors displays 24 targets consisting of on-tactor and… ▽ More Display of illusory vibration locations between physical vibrotactile motors (tactors) placed on the skin has the potential to reduce the number of tactors in distributed tactile displays. This paper presents a between-tactor display method that uses dynamic tactile stimuli to generate illusory vibration locations. A belt with only 6 vibration motors displays 24 targets consisting of on-tactor and between-tactor locations. On-tactor locations are represented by simply vibrating the relevant single tactor. Between-tactor locations are displayed by adjusting the relative vibration amplitudes of two adjacent motors, with either (1) constant vibration amplitudes or (2) perturbed vibration amplitudes (creating local illusory motion). User testing showed that perturbations improve recognition accuracy for in-between tactor localization. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Journal ref: EuroHaptics 2022

Feasibility of Smartphone Vibrations as a Sensory Diagnostic Tool

Authors: Rachel A. G. Adenekan, Alexis J. Lowber, Bryce N. Huerta, Allison M. Okamura, Kyle T. Yoshida, Cara M. Nunez

Abstract: Traditionally, clinicians use tuning forks as a binary measure to assess vibrotactile sensory perception. This approach has low measurement resolution, and the vibrations are highly variable. Therefore, we propose using vibrations from a smartphone to deliver a consistent and precise sensory test. First, we demonstrate that a smartphone has more consistent vibrations compared to a tuning fork. The… ▽ More Traditionally, clinicians use tuning forks as a binary measure to assess vibrotactile sensory perception. This approach has low measurement resolution, and the vibrations are highly variable. Therefore, we propose using vibrations from a smartphone to deliver a consistent and precise sensory test. First, we demonstrate that a smartphone has more consistent vibrations compared to a tuning fork. Then we develop an app and conduct a validation study to show that the smartphone can precisely measure a user's absolute threshold. This finding motivates future work to use smartphones to assess vibrotactile perception, allowing for increased monitoring and widespread accessibility. △ Less

Submitted 6 June, 2022; originally announced June 2022.

Comments: 3 pages, 1 figure, work-in-progress paper published in EuroHaptics Conference, 2022

MSC Class: J.2

Journal ref: Haptics: Science, Technology, Applications: 13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022, Hamburg, Germany, May 22-25, 2022, Proceedings, Pages 337-339

Wearable Haptic Device for Individuals with Congenital Absence of Proprioception

Authors: Sreela Kodali, Allison M. Okamura, Thomas C. Bulea, Alexander T. Chesler, Carsten G. Bönnemann

Abstract: A rare genetic condition, PIEZO2 loss of function (LOF) is characterized by absence of proprioception and light touch, which makes functional tasks (e.g., walking, manipulation) difficult. There are no pharmacological treatments or assistive technologies available for individuals with PIEZO2-LOF. We propose a sensory substitution device that communicates proprioceptive feedback via detectable hapt… ▽ More A rare genetic condition, PIEZO2 loss of function (LOF) is characterized by absence of proprioception and light touch, which makes functional tasks (e.g., walking, manipulation) difficult. There are no pharmacological treatments or assistive technologies available for individuals with PIEZO2-LOF. We propose a sensory substitution device that communicates proprioceptive feedback via detectable haptic stimuli. We created a wearable prototype that maps measurements of elbow movement to deep pressure applied to the forearm. The prototype applies up to 18 N, includes an embedded force sensor, and is programmable to allow for various angle-to-pressure map**s. Future work includes comparing proprioceptive acuity and movement ability with and without the device in healthy and PIEZO2-LOF individuals, develo** low-profile devices using soft robotics, providing sensory substitution for multiple joints simultaneously, and encoding additional aspects of joint dynamics. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Effects of Haptic Feedback on the Wrist during Virtual Manipulation

Authors: Mine Sarac, Allison M. Okamura, Massimiliano Di Luca

Abstract: We propose a haptic system for virtual manipulation to provide feedback on the user's forearm instead of the fingertips. In addition to visual rendering of the manipulation with virtual fingertips, we employ a device to deliver normal or shear skin-stretch at multiple points near the wrist. To understand how design parameters influence the experience, we investigated the effect of the number and l… ▽ More We propose a haptic system for virtual manipulation to provide feedback on the user's forearm instead of the fingertips. In addition to visual rendering of the manipulation with virtual fingertips, we employ a device to deliver normal or shear skin-stretch at multiple points near the wrist. To understand how design parameters influence the experience, we investigated the effect of the number and location of sensory feedback on stiffness perception. Participants compared stiffness values of virtual objects, while the haptic bracelet provided interaction feedback on the dorsal, ventral, or both sides of the wrist. Stiffness discrimination judgments and duration, as well as qualitative results collected verbally, indicate no significant difference in stiffness perception with stimulation at different and multiple locations. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 2 pages, work-in-progress paper on haptics symposium, 2020

Perception of Mechanical Properties via Wrist Haptics: Effects of Feedback Congruence

Authors: Mine Sarac, Massimiliano di Luca, Allison M. Okamura

Abstract: Despite non-co-location, haptic stimulation at the wrist can potentially provide feedback regarding interactions at the fingertips without encumbering the user's hand. Here we investigate how two types of skin deformation at the wrist (normal and shear) relate to the perception of the mechanical properties of virtual objects. We hypothesized that a congruent map** between force at the fingertips… ▽ More Despite non-co-location, haptic stimulation at the wrist can potentially provide feedback regarding interactions at the fingertips without encumbering the user's hand. Here we investigate how two types of skin deformation at the wrist (normal and shear) relate to the perception of the mechanical properties of virtual objects. We hypothesized that a congruent map** between force at the fingertips and deformation at the wrist would be better, i.e. map** finger normal force to skin indentation at the wrist, and shear force to skin shear at the wrist, would result in better perception than other map**s that either mixed or merged the two direction into a single type of feedback. We performed an experiment where haptic devices at the wrist rendered either normal or shear feedback during manipulation of virtual objects with varying stiffness, mass, or friction properties. Perception of mechanical properties was more accurate with congruent skin stimulation than noncongruent. In addition, discrimination performance and subjective reports were positively influenced by congruence. This study demonstrates that users can perceive mechanical properties via haptic feedback provided at the wrist with a consistent map** between haptic feedback and interaction forces at the fingertips, regardless of congruence. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 7 pages, submitted to IEEE International Conference on Intelligent Robots and Systems

FingerPrint: A 3-D Printed Soft Monolithic 4-Degree-of-Freedom Fingertip Haptic Device with Embedded Actuation

Authors: Zhenishbek Zhakypov, Allison M. Okamura

Abstract: Wearable fingertip haptic interfaces provide tactile stimuli on the fingerpads by applying skin pressure, linear and rotational shear, and vibration. Designing and fabricating a compact, multi-degree-of-freedom, and forceful fingertip haptic interface is challenging due to trade-offs among miniaturization, multifunctionality, and manufacturability. Downsizing electromagnetic actuators that produce… ▽ More Wearable fingertip haptic interfaces provide tactile stimuli on the fingerpads by applying skin pressure, linear and rotational shear, and vibration. Designing and fabricating a compact, multi-degree-of-freedom, and forceful fingertip haptic interface is challenging due to trade-offs among miniaturization, multifunctionality, and manufacturability. Downsizing electromagnetic actuators that produce high torques is infeasible, and integrating multiple actuators, links, joints, and transmission elements increases device size and weight. 3-D printing enables rapid manufacturing of complex devices with minimal assembly in large batches. However, it requires a careful arrangement of material properties, geometry, scale, and printer capabilities. Here we present a fully 3-D printed, soft, monolithic fingertip haptic device based on an origami pattern known as the "waterbomb" base that embeds foldable vacuum actuation and produces 4-DoF of motion on the fingerpad with tunable haptic forces (up to 1.3 N shear and 7 N normal) and torque (up to 25 N-mm). Including the thimble mounting, the compact device is 40 mm long and 20 mm wide. This demonstrates the efficacy of origami design and soft material 3D printing for designing and rapidly fabricating miniature yet complex wearable mechanisms with force output appropriate for haptic interaction. △ Less

Submitted 27 March, 2022; originally announced March 2022.

Comments: For accompanying video, visit https://youtu.be/s0oR8Z6bjQc

Social-Cultural Factors in the Design of Technology for Hispanic People with Stroke

Authors: Elizabeth D. Vasquez, Allison M. Okamura, Sean Follmer

Abstract: Stroke is a leading cause of serious, long-term disability in the United States. There exist disparities in both stroke prevalence and outcomes between people with stroke in Hispanic and Latinx communities and the general stroke population. Current stroke technology - which aims to improve quality of life and bring people with stroke to the most functional, independent state possible - has shown p… ▽ More Stroke is a leading cause of serious, long-term disability in the United States. There exist disparities in both stroke prevalence and outcomes between people with stroke in Hispanic and Latinx communities and the general stroke population. Current stroke technology - which aims to improve quality of life and bring people with stroke to the most functional, independent state possible - has shown promising results for the general stroke population, but has failed to close the recovery outcome gap for underserved Hispanic and Latinx people with stroke. Previous work in health education, digital health, and HRI has improved human health outcomes by incorporating social-cultural factors, though not for stroke. In this position paper, we aim to justify accounting for unique cultural factors in stroke technology design for the Hispanic and Latinx community. We review examples of successful culturally appropriate interventions and suggest design considerations (mutually beneficial community consultation, accommodating for barriers beforehand, building on culture, and incorporating education of the family) to provide more culturally appropriate design of Hispanic and Latinx stroke technology and reduce the disparity gap. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: 6 pages, 1 figure

A Lightweight, High-Extension, Planar 3-Degree-of-Freedom Manipulator Using Pinched Bistable Tapes

Authors: O. Godson Osele, Allison M. Okamura, Brian H. Do

Abstract: To facilitate sensing and physical interaction in remote and/or constrained environments, high-extension, lightweight robot manipulators are easier to transport and reach substantially further than traditional serial chain manipulators. We propose a novel planar 3-degree-of-freedom manipulator that achieves low weight and high extension through the use of a pair of spooling bistable tapes, commonl… ▽ More To facilitate sensing and physical interaction in remote and/or constrained environments, high-extension, lightweight robot manipulators are easier to transport and reach substantially further than traditional serial chain manipulators. We propose a novel planar 3-degree-of-freedom manipulator that achieves low weight and high extension through the use of a pair of spooling bistable tapes, commonly used in self-retracting tape measures, which are pinched together to form a reconfigurable revolute joint. The pinching action flattens the tapes to produce a localized bending region, resulting in a revolute joint that can change its orientation by cable tension and its location on the tapes though friction-driven movement of the pinching mechanism. We present the design, implementation, kinematic modeling, stiffness behavior of the revolute joint, and quasi-static performance of this manipulator. In particular, we demonstrate the ability of the manipulator to reach specified targets in free space, reach a 2D target with various orientations, and maintain an end-effector angle or stationary bending point while changing the other. The long-term goal of this work is to integrate the manipulator with an unmanned aerial vehicle to enable more capable aerial manipulation. △ Less

Submitted 21 December, 2023; v1 submitted 19 October, 2021; originally announced October 2021.

Comments: ICRA 2022

Robot-Assisted Surgical Training Over Several Days in a Virtual Surgical Environment with Divergent and Convergent Force Fields

Authors: Yousi A. Oquendo, Zonghe Chua, Margaret M. Coad, Ilana Nisky, Anthony M. Jarc, Sherry M. Wren, Thomas S. Lendvay, Allison M. Okamura

Abstract: Surgical procedures require a high level of technical skill to ensure efficiency and patient safety. Due to the direct effect of surgeon skill on patient outcomes, the development of cost-effective and realistic training methods is imperative to accelerate skill acquisition. Teleoperated robotic devices allow for intuitive ergonomic control, but the learning curve for these systems remains steep.… ▽ More Surgical procedures require a high level of technical skill to ensure efficiency and patient safety. Due to the direct effect of surgeon skill on patient outcomes, the development of cost-effective and realistic training methods is imperative to accelerate skill acquisition. Teleoperated robotic devices allow for intuitive ergonomic control, but the learning curve for these systems remains steep. Recent studies in motor learning have shown that visual or physical exaggeration of errors helps trainees to learn to perform tasks faster and more accurately. In this study, we extended the work from two previous studies to investigate the performance of subjects in different force field training conditions, including convergent (assistive), divergent (resistive), and no force field (null). △ Less

Submitted 23 September, 2021; originally announced October 2021.

Comments: 2 pages, 2 figures, Hamlyn Symposium on Medical Robotics 2019

Journal ref: Proceedings of the Hamlyn Symposium on Medical Robotics, pp. 81-82. 2019

A 4-DoF Parallel Origami Haptic Device for Normal, Shear, and Torsion Feedback

Authors: Sophia R. Williams, Jacob M. Suchoski, Zonghe Chua, Allison M. Okamura

Abstract: We present a mesoscale finger-mounted 4-degree-of-freedom (DoF) haptic device that is created using origami fabrication techniques. The 4-DoF device is a parallel kinematic mechanism capable of delivering normal, shear, and torsional haptic feedback to the fingertip. Traditional methods of robot fabrication are not well suited for designing small robotic devices because it is challenging and expen… ▽ More We present a mesoscale finger-mounted 4-degree-of-freedom (DoF) haptic device that is created using origami fabrication techniques. The 4-DoF device is a parallel kinematic mechanism capable of delivering normal, shear, and torsional haptic feedback to the fingertip. Traditional methods of robot fabrication are not well suited for designing small robotic devices because it is challenging and expensive to manufacture small, low-friction joints. Our device uses origami manufacturing principles to reduce complexity and the device footprint. We characterize the bandwidth, workspace, and force output of the device. The capabilities of the torsion-DoF are demonstrated in a virtual reality scenario. Our results show that the device can deliver haptic feedback in 4-DoFs with an effective operational workspace of 0.64cm$^3$ with $\pm 30 ^ \circ$ rotation at every location. The maximum forces and torques the device can apply in the x-, y-, z-, and $θ$-directions, are $\pm$1.5N, $\pm$1.5N, 2N, and 5N$\cdot$mm, respectively, and the device has an operating bandwidth of 9Hz. △ Less

Submitted 24 September, 2021; originally announced September 2021.

Comments: 8 pages, 7 figures

Characterization of Real-time Haptic Feedback from Multimodal Neural Network-based Force Estimates during Teleoperation

Authors: Zonghe Chua, Allison M. Okamura

Abstract: Force estimation using neural networks is a promising approach to enable haptic feedback in minimally invasive surgical robots without end-effector force sensors. Various network architectures have been proposed, but none have been tested in real time with surgical-like manipulations. Thus, questions remain about the real-time transparency and stability of force feedback from neural network-based… ▽ More Force estimation using neural networks is a promising approach to enable haptic feedback in minimally invasive surgical robots without end-effector force sensors. Various network architectures have been proposed, but none have been tested in real time with surgical-like manipulations. Thus, questions remain about the real-time transparency and stability of force feedback from neural network-based force estimates. We characterize the real-time impedance transparency and stability of force feedback rendered on a da Vinci Research Kit teleoperated surgical robot using neural networks with vision-only, state-only, and state and vision inputs. Networks were trained on an existing dataset of teleoperated manipulations without force feedback. To measure real-time stability and transparency during teleoperation with force feedback to the operator, we modeled a one-degree-of-freedom human and surgeon-side manipulandum that moved the patient-side robot to perform manipulations on silicone artificial tissue over various robot and camera configurations, and tools. We found that the networks using state inputs displayed more transparent impedance than a vision-only network. However, state-based networks displayed large instability when used to provide force feedback during lateral manipulation of the silicone. In contrast, the vision-only network showed consistent stability in all the evaluated directions. We confirmed the performance of the vision-only network for real-time force feedback in a demonstration with a human teleoperator. △ Less

Submitted 6 July, 2022; v1 submitted 23 September, 2021; originally announced September 2021.

Comments: 8 pages, 7 figures

Distributed Control of Truss Robots Using Consensus Alternating Direction Method of Multipliers

Authors: Nathan S. Usevitch, Trevor Halsted, Zachary M. Hammond, Allison M. Okamura, Mac Schwager

Abstract: Truss robots, or robots that consist of extensible links connected at universal joints, are often designed with modular physical components but require centralized control techniques. This paper presents a distributed control technique for truss robots. The truss robot is viewed as a collective, where each individual node of the robot is capable of measuring the lengths of the neighboring edges, c… ▽ More Truss robots, or robots that consist of extensible links connected at universal joints, are often designed with modular physical components but require centralized control techniques. This paper presents a distributed control technique for truss robots. The truss robot is viewed as a collective, where each individual node of the robot is capable of measuring the lengths of the neighboring edges, communicating with a subset of the other nodes, and computing and executing its own control actions with its connected edges. Through an iterative distributed optimization, the individual members utilize local information to converge on a global estimate of the robot's state, and then coordinate their planned motion to achieve desired global behavior. This distributed optimization is based on a consensus alternating direction method of multipliers framework. This distributed algorithm is then adapted to control an isoperimetric truss robot, and the distributed algorithm is used in an experimental demonstration. The demonstration allows a user to broadcast commands to a single node of the robot, which then ensures the coordinated motion of all other nodes to achieve the desired global motion. △ Less

Submitted 14 August, 2021; originally announced August 2021.

Comments: Submitted to IEEE T-RO

Shared-Control Teleoperation Paradigms on a Soft Growing Robot Manipulator

Authors: Fabio Stroppa, Mario Selvaggio, Nathaniel Agharese, MingLuo, Laura H. Blumenschein, Elliot W. Hawkes, Allison M. Okamura

Abstract: Semi-autonomous telerobotic systems allow both humans and robots to exploit their strengths, while enabling personalized execution of a task. However, for new soft robots with degrees of freedom dissimilar to those of human operators, it is unknown how the control of a task should be divided between the human and robot. This work presents a set of interaction paradigms between a human and a soft g… ▽ More Semi-autonomous telerobotic systems allow both humans and robots to exploit their strengths, while enabling personalized execution of a task. However, for new soft robots with degrees of freedom dissimilar to those of human operators, it is unknown how the control of a task should be divided between the human and robot. This work presents a set of interaction paradigms between a human and a soft growing robot manipulator, and demonstrates them in both real and simulated scenarios. The robot can grow and retract by eversion and inversion of its tubular body, a property we exploit to implement interaction paradigms. We implemented and tested six different paradigms of human-robot interaction, beginning with full teleoperation and gradually adding automation to various aspects of the task execution. All paradigms were demonstrated by two expert and two naive operators. Results show that humans and the soft robot manipulator can split control along degrees of freedom while acting simultaneously. In the simple pick-and-place task studied in this work, performance improves as the control is gradually given to the robot, because the robot can correct certain human errors. However, human engagement and enjoyment may be maximized when the task is at least partially shared. Finally, when the human operator is assisted by haptic feedback based on soft robot position errors, we observed that the improvement in performance is highly dependent on the expertise of the human operator. △ Less

Submitted 17 June, 2023; v1 submitted 2 August, 2021; originally announced August 2021.

Comments: 15 pages, 14 figures

Journal ref: J Intell Robot Syst 109, 30 (2023)

Data-driven sparse skin stimulation can convey social touch information to humans

Authors: M. Salvato, Sophia R. Williams, Cara M. Nunez, Xin Zhu, Ali Israr, Frances Lau, Keith Klumb, Freddy Abnousi, Allison M. Okamura, Heather Culbertson

Abstract: During social interactions, people use auditory, visual, and haptic cues to convey their thoughts, emotions, and intentions. Due to weight, energy, and other hardware constraints, it is difficult to create devices that completely capture the complexity of human touch. Here we explore whether a sparse representation of human touch is sufficient to convey social touch signals. To test this we collec… ▽ More During social interactions, people use auditory, visual, and haptic cues to convey their thoughts, emotions, and intentions. Due to weight, energy, and other hardware constraints, it is difficult to create devices that completely capture the complexity of human touch. Here we explore whether a sparse representation of human touch is sufficient to convey social touch signals. To test this we collected a dataset of social touch interactions using a soft wearable pressure sensor array, developed an algorithm to map recorded data to an array of actuators, then applied our algorithm to create signals that drive an array of normal indentation actuators placed on the arm. Using this wearable, low-resolution, low-force device, we find that users are able to distinguish the intended social meaning, and compare performance to results based on direct human touch. As online communication becomes more prevalent, such systems to convey haptic signals could allow for improved distant socializing and empathetic remote human-human interaction. △ Less

Submitted 29 November, 2021; v1 submitted 26 March, 2021; originally announced March 2021.

Comments: Copyright 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Task-Specific Design Optimization and Fabrication for Inflated-Beam Soft Robots with Growable Discrete Joints

Authors: Ioannis Exarchos, Karen Wang, Brian H. Do, Fabio Stroppa, Margaret M. Coad, Allison M. Okamura, C. Karen Liu

Abstract: Soft robot serial chain manipulators with the capability for growth, stiffness control, and discrete joints have the potential to approach the dexterity of traditional robot arms, while improving safety, lowering cost, and providing an increased workspace, with potential application in home environments. This paper presents an approach for design optimization of such robots to reach specified targ… ▽ More Soft robot serial chain manipulators with the capability for growth, stiffness control, and discrete joints have the potential to approach the dexterity of traditional robot arms, while improving safety, lowering cost, and providing an increased workspace, with potential application in home environments. This paper presents an approach for design optimization of such robots to reach specified targets while minimizing the number of discrete joints and thus construction and actuation costs. We define a maximum number of allowable joints, as well as hardware constraints imposed by the materials and actuation available for soft growing robots, and we formulate and solve an optimization problem to output a planar robot design, i.e., the total number of potential joints and their locations along the robot body, which reaches all the desired targets, avoids known obstacles, and maximizes the workspace. We demonstrate a process to rapidly construct the resulting soft growing robot design. Finally, we use our algorithm to evaluate the ability of this design to reach new targets and demonstrate the algorithm's utility as a design tool to explore robot capabilities given various constraints and objectives. △ Less

Submitted 22 September, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Distributed Sensor Networks Deployed Using Soft Growing Robots

Authors: Alexander M. Gruebele, Andrew C. Zerbe, Margaret M. Coad, Allison M. Okamura, Mark R. Cutkosky

Abstract: Due to their ability to move without sliding relative to their environment, soft growing robots are attractive for deploying distributed sensor networks in confined spaces. Sensing of the state of such robots would also add to their capabilities as human-safe, adaptable manipulators. However, incorporation of distributed sensors onto soft growing robots is challenging because it requires an interf… ▽ More Due to their ability to move without sliding relative to their environment, soft growing robots are attractive for deploying distributed sensor networks in confined spaces. Sensing of the state of such robots would also add to their capabilities as human-safe, adaptable manipulators. However, incorporation of distributed sensors onto soft growing robots is challenging because it requires an interface between stiff and soft materials, and the sensor network needs to undergo significant strain. In this work, we present a method for adding sensors to soft growing robots that uses flexible printed circuit boards with self-contained units of microcontrollers and sensors encased in a laminate armor that protects them from unsafe curvatures. We demonstrate the ability of this system to relay directional temperature and humidity information in hard-to-access spaces. We also demonstrate and characterize a method for sensing the growing robot shape using inertial measurement units deployed along its length, and develop a mathematical model to predict its accuracy. This work advances the capabilities of soft growing robots, as well as the field of soft robot sensing. △ Less

Submitted 9 March, 2021; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: https://www.youtube.com/watch?v=VLT3b9n0vqE&feature

Toward Force Estimation in Robot-Assisted Surgery using Deep Learning with Vision and Robot State

Authors: Zonghe Chua, Anthony M. Jarc, Allison M. Okamura

Abstract: Knowledge of interaction forces during teleoperated robot-assisted surgery could be used to enable force feedback to human operators and evaluate tissue handling skill. However, direct force sensing at the end-effector is challenging because it requires biocompatible, sterilizable, and cost-effective sensors. Vision-based deep learning using convolutional neural networks is a promising approach fo… ▽ More Knowledge of interaction forces during teleoperated robot-assisted surgery could be used to enable force feedback to human operators and evaluate tissue handling skill. However, direct force sensing at the end-effector is challenging because it requires biocompatible, sterilizable, and cost-effective sensors. Vision-based deep learning using convolutional neural networks is a promising approach for providing useful force estimates, though questions remain about generalization to new scenarios and real-time inference. We present a force estimation neural network that uses RGB images and robot state as inputs. Using a self-collected dataset, we compared the network to variants that included only a single input type, and evaluated how they generalized to new viewpoints, workspace positions, materials, and tools. We found that vision-based networks were sensitive to shifts in viewpoints, while state-only networks were robust to changes in workspace. The network with both state and vision inputs had the highest accuracy for an unseen tool, and was moderately robust to changes in viewpoints. Through feature removal studies, we found that using only position features produced better accuracy than using only force features as input. The network with both state and vision inputs outperformed a physics-based baseline model in accuracy. It showed comparable accuracy but faster computation times than a baseline recurrent neural network, making it better suited for real-time applications. △ Less

Submitted 6 July, 2022; v1 submitted 3 November, 2020; originally announced November 2020.

Comments: 7 pages, 6 figures, submitted to ICRA 2021

Isometric force pillow: using air pressure to quantify involuntary finger flexion in the presence of hypertonia

Authors: Caitlyn E. Seim, Chuzhang Han, Alexis J. Lowber, Claire Brooks, Marie Payne, Maarten G. Lansberg, Kara E. Flavin, Julius P. A. Dewald, Allison M. Okamura

Abstract: Survivors of central nervous system injury commonly present with spastic hypertonia. The affected muscles are hyperexcitable and can display involuntary static muscle tone and an exaggerated stretch reflex. These symptoms affect posture and disrupt activities of daily living. Symptoms are typically measured using subjective manual tests such as the Modified Ashworth Scale; however, more quantitati… ▽ More Survivors of central nervous system injury commonly present with spastic hypertonia. The affected muscles are hyperexcitable and can display involuntary static muscle tone and an exaggerated stretch reflex. These symptoms affect posture and disrupt activities of daily living. Symptoms are typically measured using subjective manual tests such as the Modified Ashworth Scale; however, more quantitative measures are necessary to evaluate potential treatments. The hands are one of the most common targets for intervention, but few investigators attempt to quantify symptoms of spastic hypertonia affecting the fingers. We present the isometric force pillow (IFP) to quantify involuntary grip force. This lightweight, computerized tool provides a holistic measure of finger flexion force and can be used in various orientations for clinical testing and to measure the impact of assistive devices. △ Less

Submitted 21 August, 2020; originally announced August 2020.

ACM Class: H.5.0; J.3; H.1.2; I.3.6

Journal ref: Isometric force pillow: using air pressure to quantify involuntary finger flexion in the presence of hypertonia. In International Conference on NeuroRehabilitation (pp. 835-840). 2020. Springer, Cham

Geometric Solutions for General Actuator Routing on Inflated-Beam Soft Growing Robots

Authors: Laura H Blumenschein, Margaret Koehler, Nathan S. Usevitch, Elliot W. Hawkes, D. Caleb Rucker, Allison M. Okamura

Abstract: Continuum and soft robots can leverage complex actuator shapes to take on useful shapes while actuating only a few of their many degrees of freedom. Continuum robots that also grow increase the range of potential shapes that can be actuated and enable easier access to constrained environments. Existing models for describing the complex kinematics involved in general actuation of continuum robots r… ▽ More Continuum and soft robots can leverage complex actuator shapes to take on useful shapes while actuating only a few of their many degrees of freedom. Continuum robots that also grow increase the range of potential shapes that can be actuated and enable easier access to constrained environments. Existing models for describing the complex kinematics involved in general actuation of continuum robots rely on simulation or well-behaved stress-strain relationships, but the non-linear behavior of the thin-walled inflated-beams used in growing robots makes these techniques difficult to apply. Here we derive kinematic models of single, generally routed tendon paths on a soft pneumatic backbone of inextensible but flexible material from geometric relationships alone. This allows for forward modeling of the resulting shapes with only knowledge of the geometry of the system. We show that this model can accurately predict the shape of the whole robot body and how the model changes with actuation type. We also demonstrate the use of this kinematic model for inverse design, where actuator designs are found based on desired final robot shapes. We deploy these designed actuators on soft pneumatic growing robots to show the benefits of simultaneous growth and shape change. △ Less

Submitted 26 October, 2021; v1 submitted 10 June, 2020; originally announced June 2020.

Comments: 21 pages, 18 figures

Evaluation of Non-Collocated Force Feedback Driven by Signal-Independent Noise

Authors: Zonghe Chua, Allison M. Okamura, Darrel R. Deo

Abstract: Individuals living with paralysis or amputation can operate robotic prostheses using input signals based on their intent or attempt to move. Because sensory function is lost or diminished in these individuals, haptic feedback must be non-collocated. The intracortical brain computer interface (iBCI) has enabled a variety of neural prostheses for people with paralysis. An important attribute of the… ▽ More Individuals living with paralysis or amputation can operate robotic prostheses using input signals based on their intent or attempt to move. Because sensory function is lost or diminished in these individuals, haptic feedback must be non-collocated. The intracortical brain computer interface (iBCI) has enabled a variety of neural prostheses for people with paralysis. An important attribute of the iBCI is that its input signal contains signal-independent noise. To understand the effects of signal-independent noise on a system with non-collocated haptic feedback and inform iBCI-based prostheses control strategies, we conducted an experiment with a conventional haptic interface as a proxy for the iBCI. Able-bodied users were tasked with locating an indentation within a virtual environment using input from their right hand. Non-collocated haptic feedback of the interaction forces in the virtual environment was augmented with noise of three different magnitudes and simultaneously rendered on users' left hands. We found increases in distance error of the guess of the indentation location, mean time per trial, mean peak absolute displacement and speed of tool movements during localization for the highest noise level compared to the other two levels. The findings suggest that users have a threshold of disturbance rejection and that they attempt to increase their signal-to-noise ratio through their exploratory actions. △ Less

Submitted 22 May, 2020; originally announced May 2020.

Comments: Accepted to ICRA 2020

Task Dynamics of Prior Training Influence Visual Force Estimation Ability During Teleoperation

Authors: Zonghe Chua, Anthony M. Jarc, Sherry Wren, Ilana Nisky, Allison M. Okamura

Abstract: The lack of haptic feedback in Robot-assisted Minimally Invasive Surgery (RMIS) is a potential barrier to safe tissue handling during surgery. Bayesian modeling theory suggests that surgeons with experience in open or laparoscopic surgery can develop priors of tissue stiffness that translate to better force estimation abilities during RMIS compared to surgeons with no experience. To test if prior… ▽ More The lack of haptic feedback in Robot-assisted Minimally Invasive Surgery (RMIS) is a potential barrier to safe tissue handling during surgery. Bayesian modeling theory suggests that surgeons with experience in open or laparoscopic surgery can develop priors of tissue stiffness that translate to better force estimation abilities during RMIS compared to surgeons with no experience. To test if prior haptic experience leads to improved force estimation ability in teleoperation, 33 participants were assigned to one of three training conditions: manual manipulation, teleoperation with force feedback, or teleoperation without force feedback, and learned to tension a silicone sample to a set of force values. They were then asked to perform the tension task, and a previously unencountered palpation task, to a different set of force values under teleoperation without force feedback. Compared to the teleoperation groups, the manual group had higher force error in the tension task outside the range of forces they had trained on, but showed better speed-accuracy functions in the palpation task at low force levels. This suggests that the dynamics of the training modality affect force estimation ability during teleoperation, with the prior haptic experience accessible if formed under the same dynamics as the task. △ Less

Submitted 6 July, 2022; v1 submitted 27 April, 2020; originally announced April 2020.

Comments: 12 pages, 8 figures

Investigating Social Haptic Illusions for Tactile Stroking (SHIFTS)

Authors: Cara M. Nunez, Bryce N. Huerta, Allison M. Okamura, Heather Culbertson

Abstract: A common and effective form of social touch is stroking on the forearm. We seek to replicate this stroking sensation using haptic illusions. This work compares two methods that provide sequential discrete stimulation: sequential normal indentation and sequential lateral skin-slip using discrete actuators. Our goals are to understand which form of stimulation more effectively creates a continuous s… ▽ More A common and effective form of social touch is stroking on the forearm. We seek to replicate this stroking sensation using haptic illusions. This work compares two methods that provide sequential discrete stimulation: sequential normal indentation and sequential lateral skin-slip using discrete actuators. Our goals are to understand which form of stimulation more effectively creates a continuous stroking sensation, and how many discrete contact points are needed. We performed a study with 20 participants in which they rated sensations from the haptic devices on continuity and pleasantness. We found that lateral skin-slip created a more continuous sensation, and decreasing the number of contact points decreased the continuity. These results inform the design of future wearable haptic devices and the creation of haptic signals for effective social communication. △ Less

Submitted 2 March, 2020; originally announced March 2020.

Comments: To be published in IEEE Haptics Symposium 2020

Dynamically Reconfigurable Discrete Distributed Stiffness for Inflated Beam Robots

Authors: Brian H. Do, Valory Banashek, Allison M. Okamura

Abstract: Inflated continuum robots are promising for a variety of navigation tasks, but controlling their motion with a small number of actuators is challenging. These inflated beam robots tend to buckle under compressive loads, producing extremely tight local curvature at difficult-to-control buckle point locations. In this paper, we present an inflated beam robot that uses distributed stiffness changing… ▽ More Inflated continuum robots are promising for a variety of navigation tasks, but controlling their motion with a small number of actuators is challenging. These inflated beam robots tend to buckle under compressive loads, producing extremely tight local curvature at difficult-to-control buckle point locations. In this paper, we present an inflated beam robot that uses distributed stiffness changing sections enabled by positive pressure layer jamming to control or prevent buckling. Passive valves are actuated by an electromagnet carried by an electromechanical device that travels inside the main inflated beam robot body. The valves themselves require no external connections or wiring, allowing the distributed stiffness control to be scaled to long beam lengths. Multiple layer jamming elements are stiffened simultaneously to achieve global stiffening, allowing the robot to support greater cantilevered loads and longer unsupported lengths. Local stiffening, achieved by leaving certain layer jamming elements unstiffened, allows the robot to produce "virtual joints" that dynamically change the robot kinematics. Implementing these stiffening strategies is compatible with growth through tip eversion and tendon-steering, and enables a number of new capabilities for inflated beam robots and tip-everting robots. △ Less

Submitted 11 February, 2020; originally announced February 2020.

Comments: IEEE International Conference on Robotics and Automation, 2020. Video available at https://youtu.be/mUyJ8c2W0bA

Journal ref: IEEE International Conference on Robotics and Automation, 2020, pp. 9050-9056

A Tip Mount for Transporting Sensors and Tools using Soft Growing Robots

Authors: Sang-Goo Jeong, Margaret M. Coad, Laura H. Blumenschein, Ming Luo, Usman Mehmood, Ji Hun Kim, Allison M. Okamura, Jee-Hwan Ryu

Abstract: Pneumatically operated soft growing robots that extend via tip eversion are well-suited for navigation in confined spaces. Adding the ability to interact with the environment using sensors and tools attached to the robot tip would greatly enhance the usefulness of these robots for exploration in the field. However, because the material at the tip of the robot body continually changes as the robot… ▽ More Pneumatically operated soft growing robots that extend via tip eversion are well-suited for navigation in confined spaces. Adding the ability to interact with the environment using sensors and tools attached to the robot tip would greatly enhance the usefulness of these robots for exploration in the field. However, because the material at the tip of the robot body continually changes as the robot grows and retracts, it is challenging to keep sensors and tools attached to the robot tip during actuation and environment interaction. In this paper, we analyze previous designs for mounting to the tip of soft growing robots, and we present a novel device that successfully remains attached to the robot tip while providing a mounting point for sensors and tools. Our tip mount incorporates and builds on our previous work on a device to retract the robot without undesired buckling of its body. Using our tip mount, we demonstrate two new soft growing robot capabilities: (1) pulling on the environment while retracting, and (2) retrieving and delivering objects. Finally, we discuss the limitations of our design and opportunities for improvement in future soft growing robot tip mounts. △ Less

Submitted 31 July, 2020; v1 submitted 17 December, 2019; originally announced December 2019.

Comments: Video available at https://youtu.be/eBKRbu_LSYA

Haptic Sketches on the Arm for Manipulation in Virtual Reality

Authors: Mine Sarac, Allison M. Okamura, Massimiliano Di Luca

Abstract: We propose a haptic system that applies forces or skin deformation to the user's arm, rather than at the fingertips, for believable interaction with virtual objects as an alternative to complex thimble devices. Such a haptic system would be able to convey information to the arm instead of the fingertips, even though the user manipulates virtual objects using their hands. We developed a set of hapt… ▽ More We propose a haptic system that applies forces or skin deformation to the user's arm, rather than at the fingertips, for believable interaction with virtual objects as an alternative to complex thimble devices. Such a haptic system would be able to convey information to the arm instead of the fingertips, even though the user manipulates virtual objects using their hands. We developed a set of haptic sketches to determine which directions of skin deformation are deemed more believable during a grasp and lift task. Subjective reports indicate that normal forces were the most believable feedback to represent this interaction. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Comments: 2 pages, work in progress

Journal ref: IEEE World Haptics Conference 2019, Work In Progress

Perceived Intensities of Normal and Shear Skin Stimuli using a Wearable Haptic Bracelet

Authors: Mine Sarac, Tae Myung Huh, Hojung Choi, Mark Cutkosky, Massimiliano Di Luca, Allison M. Okamura

Abstract: Our aim is to provide effective interaction with virtual objects, despite the lack of co-location of virtual and real-world contacts, while taking advantage of relatively large skin area and ease of mounting on the forearm. We performed two human participant studies to determine the effects of haptic feedback in the normal and shear directions during virtual manipulation using haptic devices worn… ▽ More Our aim is to provide effective interaction with virtual objects, despite the lack of co-location of virtual and real-world contacts, while taking advantage of relatively large skin area and ease of mounting on the forearm. We performed two human participant studies to determine the effects of haptic feedback in the normal and shear directions during virtual manipulation using haptic devices worn near the wrist. In the first study, participants performed significantly better while discriminating stiffness values of virtual objects when the feedback consisted of normal displacements compared to shear displacements. Participants also commented that they could detect normal cues much easier than shear, which motivated us to perform a second study to find the point of subjective equality (PSE) between normal and shear stimuli. Our results show that shear stimuli require a larger actuator displacement but less force than normal stimuli to achieve perceptual equality for our haptic bracelets. We found that normal and shear stimuli cannot be equalized through skin displacement nor the interaction forces across all users. Rather, a calibration method is needed to find the point of equality for each user where normal and shear stimuli create the same intensity on the user's skin. △ Less

Submitted 12 April, 2022; v1 submitted 5 November, 2019; originally announced November 2019.

Comments: 8 pages, In Press IEEE Robotic Automation Letters, IEEE International Conference on Robotics and Automation

Human-centered Control of a Growing Soft Robot for Object Manipulation

Authors: Fabio Stroppa, Ming Luo, Giada Gerboni, Margaret M. Coad, Julie M. Walker, Allison M. Okamura

Abstract: We present a user-friendly interface to teleoperate a soft robot manipulator in a complex environment. Key components of the system include a manipulator with a gras** end-effector that grows via tip eversion, gesture-based control, and haptic display to the operator for feedback and guidance. In the initial work, the operator uses the soft robot to build a tower of blocks, and future works will… ▽ More We present a user-friendly interface to teleoperate a soft robot manipulator in a complex environment. Key components of the system include a manipulator with a gras** end-effector that grows via tip eversion, gesture-based control, and haptic display to the operator for feedback and guidance. In the initial work, the operator uses the soft robot to build a tower of blocks, and future works will extend this to shared autonomy scenarios in which the human operator and robot intelligence are both necessary for task completion. △ Less

Submitted 28 October, 2019; originally announced October 2019.

Human Interface for Teleoperated Object Manipulation with a Soft Growing Robot

Authors: Fabio Stroppa, Ming Luo, Kyle Yoshida, Margaret M. Coad, Laura H. Blumenschein, Allison M. Okamura

Abstract: Soft growing robots are proposed for use in applications such as complex manipulation tasks or navigation in disaster scenarios. Safe interaction and ease of production promote the usage of this technology, but soft robots can be challenging to teleoperate due to their unique degrees of freedom. In this paper, we propose a human-centered interface that allows users to teleoperate a soft growing ro… ▽ More Soft growing robots are proposed for use in applications such as complex manipulation tasks or navigation in disaster scenarios. Safe interaction and ease of production promote the usage of this technology, but soft robots can be challenging to teleoperate due to their unique degrees of freedom. In this paper, we propose a human-centered interface that allows users to teleoperate a soft growing robot for manipulation tasks using arm movements. A study was conducted to assess the intuitiveness of the interface and the performance of our soft robot, involving a pick-and-place manipulation task. The results show that users completed the task with a success rate of 97%, achieving placement errors below 2 cm on average. These results demonstrate that our body-movement-based interface is an effective method for control of a soft growing robot manipulator. △ Less

Submitted 28 October, 2019; originally announced October 2019.

Retraction of Soft Growing Robots without Buckling

Authors: Margaret M. Coad, Rachel P. Thomasson, Laura H. Blumenschein, Nathan S. Usevitch, Elliot W. Hawkes, Allison M. Okamura

Abstract: Tip-extending soft robots that "grow" via pneumatic eversion of their body material have demonstrated applications in exploration of cluttered environments. During growth, the motion and force of the robot tip can be controlled in three degrees of freedom using actuators that direct the tip in combination with extension. However, when reversal of the growth process is attempted by retracting the i… ▽ More Tip-extending soft robots that "grow" via pneumatic eversion of their body material have demonstrated applications in exploration of cluttered environments. During growth, the motion and force of the robot tip can be controlled in three degrees of freedom using actuators that direct the tip in combination with extension. However, when reversal of the growth process is attempted by retracting the internal body material from the base, the robot body often responds by buckling rather than inverting the body material, making control of tip motion and force impossible. We present and validate a model to predict when buckling occurs instead of inversion, and we present an electromechanical device that can be added to a tip-extending soft robot to prevent buckling during retraction, restoring the ability of steering actuators to control the robot's motion and force during inversion. Using our retraction device, we demonstrate three previously impossible tasks: exploring different branches of a forking path, reversing growth while applying minimal force on the environment, and bringing back environment samples to the base. △ Less

Submitted 18 December, 2019; v1 submitted 25 October, 2019; originally announced October 2019.

Comments: Under review for the IEEE Robotics and Automation Letters. Video available at https://www.youtube.com/watch?v=Vw8cArH0vxk

Learning an Action-Conditional Model for Haptic Texture Generation

Authors: Negin Heravi, Wenzhen Yuan, Allison M. Okamura, Jeannette Bohg

Abstract: Rich haptic sensory feedback in response to user interactions is desirable for an effective, immersive virtual reality or teleoperation system. However, this feedback depends on material properties and user interactions in a complex, non-linear manner. Therefore, it is challenging to model the map** from material and user interactions to haptic feedback in a way that generalizes over many variat… ▽ More Rich haptic sensory feedback in response to user interactions is desirable for an effective, immersive virtual reality or teleoperation system. However, this feedback depends on material properties and user interactions in a complex, non-linear manner. Therefore, it is challenging to model the map** from material and user interactions to haptic feedback in a way that generalizes over many variations of the user's input. Current methodologies are typically conditioned on user interactions, but require a separate model for each material. In this paper, we present a learned action-conditional model that uses data from a vision-based tactile sensor (GelSight) and user's action as input. This model predicts an induced acceleration that could be used to provide haptic vibration feedback to a user. We trained our proposed model on a publicly available dataset (Penn Haptic Texture Toolkit) that we augmented with GelSight measurements of the different materials. We show that a unified model over all materials outperforms previous methods and generalizes to new actions and new instances of the material categories in the dataset. △ Less

Submitted 25 October, 2020; v1 submitted 28 September, 2019; originally announced September 2019.

Comments: ICRA 2020

Understanding Continuous and Pleasant Linear Sensations on the Forearm from a Sequential Discrete Lateral Skin-Slip Haptic Device

Authors: Cara M. Nunez, Sophia R. Williams, Allison M. Okamura, Heather Culbertson

Abstract: A continuous stroking sensation on the skin can convey messages or emotion cues. We seek to induce this sensation using a combination of illusory motion and lateral stroking via a haptic device. Our system provides discrete lateral skin-slip on the forearm with rotating tactors, which independently provide lateral skin-slip in a timed sequence. We vary the sensation by changing the angular velocit… ▽ More A continuous stroking sensation on the skin can convey messages or emotion cues. We seek to induce this sensation using a combination of illusory motion and lateral stroking via a haptic device. Our system provides discrete lateral skin-slip on the forearm with rotating tactors, which independently provide lateral skin-slip in a timed sequence. We vary the sensation by changing the angular velocity and delay between adjacent tactors, such that the apparent speed of the perceived stroke ranges from 2.5 to 48.2 cm/s. We investigated which actuation parameters create the most pleasant and continuous sensations through a user study with 16 participants. On average, the sensations were rated by participants as both continuous and pleasant. The most continuous and pleasant sensations were created by apparent speeds of 7.7 and 5.1 cm/s, respectively. We also investigated the effect of spacing between contact points on the pleasantness and continuity of the stroking sensation, and found that the users experience a pleasant and continuous linear sensation even when the space between contact points is relatively large (40 mm). Understanding how sequential discrete lateral skin-slip creates continuous linear sensations can influence the design and control of future wearable haptic devices. △ Less

Submitted 3 September, 2019; originally announced September 2019.

Robust Navigation of a Soft Growing Robot by Exploiting Contact with the Environment

Authors: Joseph D. Greer, Laura H. Blumenschein, Ron Alterovitz, Elliot W. Hawkes, Allison M. Okamura

Abstract: Navigation and motion control of a robot to a destination are tasks that have historically been performed with the assumption that contact with the environment is harmful. This makes sense for rigid-bodied robots where obstacle collisions are fundamentally dangerous. However, because many soft robots have bodies that are low-inertia and compliant, obstacle contact is inherently safe. As a result,… ▽ More Navigation and motion control of a robot to a destination are tasks that have historically been performed with the assumption that contact with the environment is harmful. This makes sense for rigid-bodied robots where obstacle collisions are fundamentally dangerous. However, because many soft robots have bodies that are low-inertia and compliant, obstacle contact is inherently safe. As a result, constraining paths of the robot to not interact with the environment is not necessary and may be limiting. In this paper, we mathematically formalize interactions of a soft growing robot with a planar environment in an empirical kinematic model. Using this interaction model, we develop a method to plan paths for the robot to a destination. Rather than avoiding contact with the environment, the planner exploits obstacle contact when beneficial for navigation. We find that a planner that takes into account and capitalizes on environmental contact produces paths that are more robust to uncertainty than a planner that avoids all obstacle contact. △ Less

Submitted 9 February, 2021; v1 submitted 22 August, 2019; originally announced August 2019.

Comments: 15 pages, 18 figures, supplementary video included and higher resolution available at https://youtu.be/XdTdFLz2TWU

Journal ref: The International Journal of Robotics Research. 2020;39(14):1724-1738