-
Please do not go: understanding turnover of software engineers from different perspectives
Authors:
Michelle Larissa Luciano Carvalho,
Paulo da Silva Cruz,
Eduardo Santana de Almeida,
Paulo Anselmo da Mota Silveira Neto,
Rafael Prikladnicki
Abstract:
Turnover consists of moving into and out of professional employees in the company in a given period. Such a phenomenon significantly impacts the software industry since it generates knowledge loss, delays in the schedule, and increased costs in the final project. Despite the efforts made by researchers and professionals to minimize the turnover, more studies are needed to understand the motivation…
▽ More
Turnover consists of moving into and out of professional employees in the company in a given period. Such a phenomenon significantly impacts the software industry since it generates knowledge loss, delays in the schedule, and increased costs in the final project. Despite the efforts made by researchers and professionals to minimize the turnover, more studies are needed to understand the motivation that drives Software Engineers to leave their jobs and the main strategies CEOs adopt to retain these professionals in software development companies. In this paper, we contribute a mixed methods study involving semi-structured interviews with Software Engineers and CEOs to obtain a wider opinion of these professionals about turnover and a subsequent validation survey with additional software engineers to check and review the insights from interviews. In studying such aspects, we identified 19 different reasons for software engineers' turnover and 18 more efficient strategies used in the software development industry to reduce it. Our findings provide several implications for industry and academia, which can drive future research.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Event-based dataset for the detection and classification of manufacturing assembly tasks
Authors:
Laura Duarte,
Pedro Neto
Abstract:
The featured dataset, the Event-based Dataset of Assembly Tasks (EDAT24), showcases a selection of manufacturing primitive tasks (idle, pick, place, and screw), which are basic actions performed by human operators in any manufacturing assembly. The data were captured using a DAVIS240C event camera, an asynchronous vision sensor that registers events when changes in light intensity value occur. Eve…
▽ More
The featured dataset, the Event-based Dataset of Assembly Tasks (EDAT24), showcases a selection of manufacturing primitive tasks (idle, pick, place, and screw), which are basic actions performed by human operators in any manufacturing assembly. The data were captured using a DAVIS240C event camera, an asynchronous vision sensor that registers events when changes in light intensity value occur. Events are a lightweight data format for conveying visual information and are well-suited for real-time detection and analysis of human motion. Each manufacturing primitive has 100 recorded samples of DAVIS240C data, including events and greyscale frames, for a total of 400 samples. In the dataset, the user interacts with objects from the open-source CT-Benchmark in front of the static DAVIS event camera. All data are made available in raw form (.aedat) and in pre-processed form (.npy). Custom-built Python code is made available together with the dataset to aid researchers to add new manufacturing primitives or extend the dataset with more samples.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Offline robot programming assisted by task demonstration: an AutomationML interoperable solution for glass adhesive application and welding
Authors:
M. Babcinschi,
F. Cruz,
N. Duarte,
S. Santos,
S. Alves,
P. Neto
Abstract:
Robots have been successfully deployed in both traditional and novel manufacturing processes. However, they are still difficult to program by non-experts, which limits their accessibility to a wider range of potential users. Programming robots requires expertise in both robotics and the specific manufacturing process in which they are applied. Robot programs created offline often lack parameters t…
▽ More
Robots have been successfully deployed in both traditional and novel manufacturing processes. However, they are still difficult to program by non-experts, which limits their accessibility to a wider range of potential users. Programming robots requires expertise in both robotics and the specific manufacturing process in which they are applied. Robot programs created offline often lack parameters that represent relevant manufacturing skills when executing a specific task. These skills encompass aspects like robot orientation and velocity. This paper introduces an intuitive robot programming system designed to capture manufacturing skills from task demonstrations performed by skilled workers. Demonstration data, including orientations and velocities of the working paths, are acquired using a magnetic tracking system fixed to the tools used by the worker. Positional data are extracted from CAD/CAM. Robot path poses are transformed into Cartesian space and validated in simulation, subsequently leading to the generation of robot programs. PathML, an AutomationML-based syntax, integrates robot and manufacturing data across the heterogeneous elements and stages of the manufacturing systems considered. Experiments conducted on the glass adhesive application and welding processes showcased the intuitive nature of the system, with path errors falling within the functional tolerance range.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Developers' Perceptions on the Impact of ChatGPT in Software Development: A Survey
Authors:
Thiago S. Vaillant,
Felipe Deveza de Almeida,
Paulo Anselmo M. S. Neto,
Cuiyun Gao,
Jan Bosch,
Eduardo Santana de Almeida
Abstract:
As Large Language Models (LLMs), including ChatGPT and analogous systems, continue to advance, their robust natural language processing capabilities and diverse applications have garnered considerable attention. Nonetheless, despite the increasing acknowledgment of the convergence of Artificial Intelligence (AI) and Software Engineering (SE), there is a lack of studies involving the impact of this…
▽ More
As Large Language Models (LLMs), including ChatGPT and analogous systems, continue to advance, their robust natural language processing capabilities and diverse applications have garnered considerable attention. Nonetheless, despite the increasing acknowledgment of the convergence of Artificial Intelligence (AI) and Software Engineering (SE), there is a lack of studies involving the impact of this convergence on the practices and perceptions of software developers. Understanding how software developers perceive and engage with AI tools, such as ChatGPT, is essential for elucidating the impact and potential challenges of incorporating AI-driven tools in the software development process. In this paper, we conducted a survey with 207 software developers to understand the impact of ChatGPT on software quality, productivity, and job satisfaction. Furthermore, the study delves into developers' expectations regarding future adaptations of ChatGPT, concerns about potential job displacement, and perspectives on regulatory interventions.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Massively Annotated Datasets for Assessment of Synthetic and Real Data in Face Recognition
Authors:
Pedro C. Neto,
Rafael M. Mamede,
Carolina Albuquerque,
Tiago Gonçalves,
Ana F. Sequeira
Abstract:
Face recognition applications have grown in parallel with the size of datasets, complexity of deep learning models and computational power. However, while deep learning models evolve to become more capable and computational power keeps increasing, the datasets available are being retracted and removed from public access. Privacy and ethical concerns are relevant topics within these domains. Throug…
▽ More
Face recognition applications have grown in parallel with the size of datasets, complexity of deep learning models and computational power. However, while deep learning models evolve to become more capable and computational power keeps increasing, the datasets available are being retracted and removed from public access. Privacy and ethical concerns are relevant topics within these domains. Through generative artificial intelligence, researchers have put efforts into the development of completely synthetic datasets that can be used to train face recognition systems. Nonetheless, the recent advances have not been sufficient to achieve performance comparable to the state-of-the-art models trained on real data. To study the drift between the performance of models trained on real and synthetic datasets, we leverage a massive attribute classifier (MAC) to create annotations for four datasets: two real and two synthetic. From these annotations, we conduct studies on the distribution of each attribute within all four datasets. Additionally, we further inspect the differences between real and synthetic datasets on the attribute set. When comparing through the Kullback-Leibler divergence we have found differences between real and synthetic samples. Interestingly enough, we have verified that while real samples suffice to explain the synthetic distribution, the opposite could not be further from being true.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Second Edition FRCSyn Challenge at CVPR 2024: Face Recognition Challenge in the Era of Synthetic Data
Authors:
Ivan DeAndres-Tame,
Ruben Tolosana,
Pietro Melzi,
Ruben Vera-Rodriguez,
Minchul Kim,
Christian Rathgeb,
Xiaoming Liu,
Aythami Morales,
Julian Fierrez,
Javier Ortega-Garcia,
Zhizhou Zhong,
Yuge Huang,
Yuxi Mi,
Shouhong Ding,
Shuigeng Zhou,
Shuai He,
Lingzhi Fu,
Heng Cong,
Rongyu Zhang,
Zhihong Xiao,
Evgeny Smirnov,
Anton Pimenov,
Aleksei Grigorev,
Denis Timoshenko,
Kaleb Mesfin Asfaw
, et al. (33 additional authors not shown)
Abstract:
Synthetic data is gaining increasing relevance for training machine learning models. This is mainly motivated due to several factors such as the lack of real data and intra-class variability, time and errors produced in manual labeling, and in some cases privacy concerns, among others. This paper presents an overview of the 2nd edition of the Face Recognition Challenge in the Era of Synthetic Data…
▽ More
Synthetic data is gaining increasing relevance for training machine learning models. This is mainly motivated due to several factors such as the lack of real data and intra-class variability, time and errors produced in manual labeling, and in some cases privacy concerns, among others. This paper presents an overview of the 2nd edition of the Face Recognition Challenge in the Era of Synthetic Data (FRCSyn) organized at CVPR 2024. FRCSyn aims to investigate the use of synthetic data in face recognition to address current technological limitations, including data privacy concerns, demographic biases, generalization to novel scenarios, and performance constraints in challenging situations such as aging, pose variations, and occlusions. Unlike the 1st edition, in which synthetic data from DCFace and GANDiffFace methods was only allowed to train face recognition systems, in this 2nd edition we propose new sub-tasks that allow participants to explore novel face generative methods. The outcomes of the 2nd FRCSyn Challenge, along with the proposed experimental protocol and benchmarking contribute significantly to the application of synthetic data to face recognition.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
An in-Contact Robotic System for the Process of Desoldering PCB Components
Authors:
Silvia Santos,
Lino Marques,
Pedro Neto
Abstract:
The disposal and recycling of electronic waste (e-waste) is a global challenge. The disassembly of components is a crucial step towards an efficient recycling process, avoiding the destructive methods. Although most disassembly work is still done manually due to the diversity and complexity of components, there is a growing interest in develo** automated methods to improve efficiency and reduce…
▽ More
The disposal and recycling of electronic waste (e-waste) is a global challenge. The disassembly of components is a crucial step towards an efficient recycling process, avoiding the destructive methods. Although most disassembly work is still done manually due to the diversity and complexity of components, there is a growing interest in develo** automated methods to improve efficiency and reduce labor costs. This study aims to robotize the desoldering process and extracting components from printed circuit boards (PCBs), with the goal of automating the process as much as possible. The proposed strategy consists of several phases, including the controlled contact of the robotic tool with the PCB components. A specific tool was developed to apply a controlled force against the PCB component, removing it from the board. The results demonstrate that it is feasible to remove the PCB components with a high success rate (approximately 100% for the bigger PCB components).
△ Less
Submitted 8 March, 2024;
originally announced March 2024.
-
A Collaborative Robot-Assisted Manufacturing Assembly Process
Authors:
Miguel Neves,
Laura Duarte,
Pedro Neto
Abstract:
An effective human-robot collaborative process results in the reduction of the operator's workload, promoting a more efficient, productive, safer and less error-prone working environment. However, the implementation of collaborative robots in industry is still challenging. In this work, we compare manual and robot-assisted assembly processes to evaluate the effectiveness of collaborative robots wh…
▽ More
An effective human-robot collaborative process results in the reduction of the operator's workload, promoting a more efficient, productive, safer and less error-prone working environment. However, the implementation of collaborative robots in industry is still challenging. In this work, we compare manual and robot-assisted assembly processes to evaluate the effectiveness of collaborative robots while featuring different modes of operation (coexistence, cooperation and collaboration). Results indicate an improvement in ergonomic conditions and ease of execution without substantially compromising assembly time. Furthermore, the robot is intuitive to use and guides the user on the proper sequencing of the process.
△ Less
Submitted 8 March, 2024;
originally announced March 2024.
-
Nanomechanically Induced Transparency
Authors:
E. C. Diniz,
O. P. de Sá Neto
Abstract:
In this paper, we investigate a nanomechanically induced transparency (NIT) effects that arises from the coupling of a nanoelectromechanical system and a trapped ion. By confining the ion in mesoscopic traps and capacitively coupling it with a nanoelectromechanical system suspended as electrodes, the research is intricately focussed on the implications of including the ion's degrees of freedom. Th…
▽ More
In this paper, we investigate a nanomechanically induced transparency (NIT) effects that arises from the coupling of a nanoelectromechanical system and a trapped ion. By confining the ion in mesoscopic traps and capacitively coupling it with a nanoelectromechanical system suspended as electrodes, the research is intricately focussed on the implications of including the ion's degrees of freedom. The Lamb--Dicke approximation is crucial to understanding the effects of phonon exchange with electronic qubits and revealing transparency phenomena in this unique coupling. The results underline the importance of the Lamb--Dicke approximation in modelling the effects of transparency windows in nanoelectromechanical systems.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Benchmarking human-robot collaborative assembly tasks
Authors:
Laura Duarte,
Miguel Neves,
Pedro Neto
Abstract:
Manufacturing assembly tasks can vary in complexity and level of automation. Yet, achieving full automation can be challenging and inefficient, particularly due to the complexity of certain assembly operations. Human-robot collaborative work, leveraging the strengths of human labor alongside the capabilities of robots, can be a solution for enhancing efficiency. This paper introduces the CT benchm…
▽ More
Manufacturing assembly tasks can vary in complexity and level of automation. Yet, achieving full automation can be challenging and inefficient, particularly due to the complexity of certain assembly operations. Human-robot collaborative work, leveraging the strengths of human labor alongside the capabilities of robots, can be a solution for enhancing efficiency. This paper introduces the CT benchmark, a benchmark and model set designed to facilitate the testing and evaluation of human-robot collaborative assembly scenarios. It was designed to compare manual and automatic processes using metrics such as the assembly time and human workload. The components of the model set can be assembled through the most common assembly tasks, each with varying levels of difficulty. The CT benchmark was designed with a focus on its applicability in human-robot collaborative environments, with the aim of ensuring the reproducibility and replicability of experiments. Experiments were carried out to assess assembly performance in three different setups (manual, automatic and collaborative), measuring metrics related to the assembly time and the workload on human operators. The results suggest that the collaborative approach takes longer than the fully manual assembly, with an increase of 70.8%. However, users reported a lower overall workload, as well as reduced mental demand, physical demand, and effort according to the NASA-TLX questionnaire.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Model Compression Techniques in Biometrics Applications: A Survey
Authors:
Eduarda Caldeira,
Pedro C. Neto,
Marco Huber,
Naser Damer,
Ana F. Sequeira
Abstract:
The development of deep learning algorithms has extensively empowered humanity's task automatization capacity. However, the huge improvement in the performance of these models is highly correlated with their increasing level of complexity, limiting their usefulness in human-oriented applications, which are usually deployed in resource-constrained devices. This led to the development of compression…
▽ More
The development of deep learning algorithms has extensively empowered humanity's task automatization capacity. However, the huge improvement in the performance of these models is highly correlated with their increasing level of complexity, limiting their usefulness in human-oriented applications, which are usually deployed in resource-constrained devices. This led to the development of compression techniques that drastically reduce the computational and memory costs of deep learning models without significant performance degradation. This paper aims to systematize the current literature on this topic by presenting a comprehensive survey of model compression techniques in biometrics applications, namely quantization, knowledge distillation and pruning. We conduct a critical analysis of the comparative value of these techniques, focusing on their advantages and disadvantages and presenting suggestions for future work directions that can potentially improve the current methods. Additionally, we discuss and analyze the link between model bias and model compression, highlighting the need to direct compression research toward model fairness in future works.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Detecting Events in Crowds Through Changes in Geometrical Dimensions of Pedestrians
Authors:
Matheus Schreiner Homrich da Silva,
Paulo Brossard de Souza Pinto Neto,
Rodolfo Migon Favaretto,
Soraia Raupp Musse
Abstract:
Security is an important topic in our contemporary world, and the ability to automate the detection of any events of interest that can take place in a crowd is of great interest to a population. We hypothesize that the detection of events in videos is correlated with significant changes in pedestrian behaviors. In this paper, we examine three different scenarios of crowd behavior, containing both…
▽ More
Security is an important topic in our contemporary world, and the ability to automate the detection of any events of interest that can take place in a crowd is of great interest to a population. We hypothesize that the detection of events in videos is correlated with significant changes in pedestrian behaviors. In this paper, we examine three different scenarios of crowd behavior, containing both the cases where an event triggers a change in the behavior of the crowd and two video sequences where the crowd and its motion remain mostly unchanged. With both the videos and the tracking of the individual pedestrians (performed in a pre-processed phase), we use Geomind, a software we developed to extract significant data about the scene, in particular, the geometrical features, personalities, and emotions of each person. We then examine the output, seeking a significant change in the way each person acts as a function of the time, that could be used as a basis to identify events or to model realistic crowd actions. When applied to the games area, our method can use the detected events to find some sort of pattern to be then used in agent simulation. Results indicate that our hypothesis seems valid in the sense that the visually observed events could be automatically detected using GeoMind.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
A Q-learning approach to the continuous control problem of robot inverted pendulum balancing
Authors:
Mohammad Safeea,
Pedro Neto
Abstract:
This study evaluates the application of a discrete action space reinforcement learning method (Q-learning) to the continuous control problem of robot inverted pendulum balancing. To speed up the learning process and to overcome technical difficulties related to the direct learning on the real robotic system, the learning phase is performed in simulation environment. A mathematical model of the sys…
▽ More
This study evaluates the application of a discrete action space reinforcement learning method (Q-learning) to the continuous control problem of robot inverted pendulum balancing. To speed up the learning process and to overcome technical difficulties related to the direct learning on the real robotic system, the learning phase is performed in simulation environment. A mathematical model of the system dynamics is implemented, deduced by curve fitting on data acquired from the real system. The proposed approach demonstrated feasible, featuring its application on a real world robot that learned to balance an inverted pendulum. This study also reinforces and demonstrates the importance of an accurate representation of the physical world in simulation to achieve a more efficient implementation of reinforcement learning algorithms in real world, even when using a discrete action space algorithm to control a continuous action.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Reroute Prediction Service
Authors:
Ítalo Romani de Oliveira,
Samet Ayhan,
Michael Biglin,
Pablo Costas,
Euclides C. Pinto Neto
Abstract:
The cost of delays was estimated as 33 billion US dollars only in 2019 for the US National Airspace System, a peak value following a growth trend in past years. Aiming to address this huge inefficiency, we designed and developed a novel Data Analytics and Machine Learning system, which aims at reducing delays by proactively supporting re-routing decisions.
Given a time interval up to a few days…
▽ More
The cost of delays was estimated as 33 billion US dollars only in 2019 for the US National Airspace System, a peak value following a growth trend in past years. Aiming to address this huge inefficiency, we designed and developed a novel Data Analytics and Machine Learning system, which aims at reducing delays by proactively supporting re-routing decisions.
Given a time interval up to a few days in the future, the system predicts if a reroute advisory for a certain Air Route Traffic Control Center or for a certain advisory identifier will be issued, which may impact the pertinent routes. To deliver such predictions, the system uses historical reroute data, collected from the System Wide Information Management (SWIM) data services provided by the FAA, and weather data, provided by the US National Centers for Environmental Prediction (NCEP). The data is huge in volume, and has many items streamed at high velocity, uncorrelated and noisy. The system continuously processes the incoming raw data and makes it available for the next step where an interim data store is created and adaptively maintained for efficient query processing. The resulting data is fed into an array of ML algorithms, which compete for higher accuracy. The best performing algorithm is used in the final prediction, generating the final results. Mean accuracy values higher than 90% were obtained in our experiments with this system.
Our algorithm divides the area of interest in units of aggregation and uses temporal series of the aggregate measures of weather forecast parameters in each geographical unit, in order to detect correlations with reroutes and where they will most likely occur. Aiming at practical application, the system is formed by a number of microservices, which are deployed in the cloud, making the system distributed, scalable and highly available.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Compressed Models Decompress Race Biases: What Quantized Models Forget for Fair Face Recognition
Authors:
Pedro C. Neto,
Eduarda Caldeira,
Jaime S. Cardoso,
Ana F. Sequeira
Abstract:
With the ever-growing complexity of deep learning models for face recognition, it becomes hard to deploy these systems in real life. Researchers have two options: 1) use smaller models; 2) compress their current models. Since the usage of smaller models might lead to concerning biases, compression gains relevance. However, compressing might be also responsible for an increase in the bias of the fi…
▽ More
With the ever-growing complexity of deep learning models for face recognition, it becomes hard to deploy these systems in real life. Researchers have two options: 1) use smaller models; 2) compress their current models. Since the usage of smaller models might lead to concerning biases, compression gains relevance. However, compressing might be also responsible for an increase in the bias of the final model. We investigate the overall performance, the performance on each ethnicity subgroup and the racial bias of a State-of-the-Art quantization approach when used with synthetic and real data. This analysis provides a few more details on potential benefits of performing quantization with synthetic data, for instance, the reduction of biases on the majority of test scenarios. We tested five distinct architectures and three different training datasets. The models were evaluated on a fourth dataset which was collected to infer and compare the performance of face recognition models on different ethnicity.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Integrated Design Fabrication and Control of a Bioinspired Multimaterial Soft Robotic Hand
Authors:
Samuel Alves,
Mihail Babcinschi,
Afonso Silva,
Diogo Neto,
Diogo Fonseca,
Pedro Neto
Abstract:
Machines that mimic humans have inspired scientists for centuries. Bio-inspired soft robotic hands are a good example of such an endeavor, featuring intrinsic material compliance and continuous motion to deal with uncertainty and adapt to unstructured environments. Recent research led to impactful achievements in functional designs, modeling, fabrication, and control of soft robots. Nevertheless,…
▽ More
Machines that mimic humans have inspired scientists for centuries. Bio-inspired soft robotic hands are a good example of such an endeavor, featuring intrinsic material compliance and continuous motion to deal with uncertainty and adapt to unstructured environments. Recent research led to impactful achievements in functional designs, modeling, fabrication, and control of soft robots. Nevertheless, the full realization of life-like movements is still challenging to achieve, often based on trial-and-error considerations from design to fabrication, consuming time and resources. In this study, a soft robotic hand is proposed, composed of soft actuator cores and an exoskeleton, featuring a multi-material design aided by finite element analysis (FEA) to define the hand geometry and promote finger's bendability. The actuators are fabricated using molding and the exoskeleton is 3D-printed in a single step. An ON-OFF controller keeps the set fingers' inner pressures related to specific bending angles, even in the presence of leaks. The FEA numerical results were validated by experimental tests, as well as the ability of the hand to grasp objects with different shapes, weights and sizes. This integrated solution will make soft robotic hands more available to people, at a reduced cost, avoiding the time-consuming design-fabrication trial-and-error processes.
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
Software Product Line Engineering via Software Transplantation
Authors:
Leandro O. Souza,
Earl T. Barr,
Justyna Petke,
Eduardo S. Almeida,
Paulo Anselmo M. S. Neto
Abstract:
For companies producing related products, a Software Product Line (SPL) is a software reuse method that improves time-to-market and software quality, achieving substantial cost reductions.These benefits do not come for free. It often takes years to re-architect and re-engineer a codebase to support SPL and, once adopted, it must be maintained. Current SPL practice relies on a collection of tools,…
▽ More
For companies producing related products, a Software Product Line (SPL) is a software reuse method that improves time-to-market and software quality, achieving substantial cost reductions.These benefits do not come for free. It often takes years to re-architect and re-engineer a codebase to support SPL and, once adopted, it must be maintained. Current SPL practice relies on a collection of tools, tailored for different reengineering phases, whose output developers must coordinate and integrate. We present Foundry, a general automated approach for leveraging software transplantation to speed conversion to and maintenance of SPL. Foundry facilitates feature extraction and migration. It can efficiently, repeatedly, transplant a sequence of features, implemented in multiple files. We used Foundry to create two valid product lines that integrate features from three real-world systems in an automated way. Moreover, we conducted an experiment comparing Foundry's feature migration with manual effort. We show that Foundry automatically migrated features across codebases 4.8 times faster, on average, than the average time a group of SPL experts took to accomplish the task.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Unveiling the Two-Faced Truth: Disentangling Morphed Identities for Face Morphing Detection
Authors:
Eduarda Caldeira,
Pedro C. Neto,
Tiago Gonçalves,
Naser Damer,
Ana F. Sequeira,
Jaime S. Cardoso
Abstract:
Morphing attacks keep threatening biometric systems, especially face recognition systems. Over time they have become simpler to perform and more realistic, as such, the usage of deep learning systems to detect these attacks has grown. At the same time, there is a constant concern regarding the lack of interpretability of deep learning models. Balancing performance and interpretability has been a d…
▽ More
Morphing attacks keep threatening biometric systems, especially face recognition systems. Over time they have become simpler to perform and more realistic, as such, the usage of deep learning systems to detect these attacks has grown. At the same time, there is a constant concern regarding the lack of interpretability of deep learning models. Balancing performance and interpretability has been a difficult task for scientists. However, by leveraging domain information and proving some constraints, we have been able to develop IDistill, an interpretable method with state-of-the-art performance that provides information on both the identity separation on morph samples and their contribution to the final prediction. The domain information is learnt by an autoencoder and distilled to a classifier system in order to teach it to separate identity information. When compared to other methods in the literature it outperforms them in three out of five databases and is competitive in the remaining.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Robust human position estimation in cooperative robotic cells
Authors:
António Amorim,
Diana Guimarães,
Tiago Mendonça,
Pedro Neto,
Paulo Costa,
António Paulo Moreira
Abstract:
Robots are increasingly present in our lives, sharing the workspace and tasks with human co-workers. However, existing interfaces for human-robot interaction / cooperation (HRI/C) have limited levels of intuitiveness to use and safety is a major concern when humans and robots share the same workspace. Many times, this is due to the lack of a reliable estimation of the human pose in space which is…
▽ More
Robots are increasingly present in our lives, sharing the workspace and tasks with human co-workers. However, existing interfaces for human-robot interaction / cooperation (HRI/C) have limited levels of intuitiveness to use and safety is a major concern when humans and robots share the same workspace. Many times, this is due to the lack of a reliable estimation of the human pose in space which is the primary input to calculate the human-robot minimum distance (required for safety and collision avoidance) and HRI/C featuring machine learning algorithms classifying human behaviours / gestures. Each sensor type has its own characteristics resulting in problems such as occlusions (vision) and drift (inertial) when used in an isolated fashion. In this paper, it is proposed a combined system that merges the human tracking provided by a 3D vision sensor with the pose estimation provided by a set of inertial measurement units (IMUs) placed in human body limbs. The IMUs compensate the gaps in occluded areas to have tracking continuity. To mitigate the lingering effects of the IMU offset we propose a continuous online calculation of the offset value. Experimental tests were designed to simulate human motion in a human-robot collaborative environment where the robot moves away to avoid unexpected collisions with de human. Results indicate that our approach is able to capture the human\textsc's position, for example the forearm, with a precision in the millimetre range and robustness to occlusions.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
A study on a Q-Learning algorithm application to a manufacturing assembly problem
Authors:
Miguel Neves,
Miguel Vieira,
Pedro Neto
Abstract:
The development of machine learning algorithms has been gathering relevance to address the increasing modelling complexity of manufacturing decision-making problems. Reinforcement learning is a methodology with great potential due to the reduced need for previous training data, i.e., the system learns along time with actual operation. This study focuses on the implementation of a reinforcement lea…
▽ More
The development of machine learning algorithms has been gathering relevance to address the increasing modelling complexity of manufacturing decision-making problems. Reinforcement learning is a methodology with great potential due to the reduced need for previous training data, i.e., the system learns along time with actual operation. This study focuses on the implementation of a reinforcement learning algorithm in an assembly problem of a given object, aiming to identify the effectiveness of the proposed approach in the optimisation of the assembly process time. A model-free Q-Learning algorithm is applied, considering the learning of a matrix of Q-values (Q-table) from the successive interactions with the environment to suggest an assembly sequence solution. This implementation explores three scenarios with increasing complexity so that the impact of the Q-Learning\textsc's parameters and rewards is assessed to improve the reinforcement learning agent performance. The optimisation approach achieved very promising results by learning the optimal assembly sequence 98.3% of the times.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Online Recognition of Incomplete Gesture Data to Interface Collaborative Robots
Authors:
M. A. Simão,
O. Gibaru,
P. Neto
Abstract:
Online recognition of gestures is critical for intuitive human-robot interaction (HRI) and further push collaborative robotics into the market, making robots accessible to more people. The problem is that it is difficult to achieve accurate gesture recognition in real unstructured environments, often using distorted and incomplete multisensory data. This paper introduces an HRI framework to classi…
▽ More
Online recognition of gestures is critical for intuitive human-robot interaction (HRI) and further push collaborative robotics into the market, making robots accessible to more people. The problem is that it is difficult to achieve accurate gesture recognition in real unstructured environments, often using distorted and incomplete multisensory data. This paper introduces an HRI framework to classify large vocabularies of interwoven static gestures (SGs) and dynamic gestures (DGs) captured with wearable sensors. DG features are obtained by applying data dimensionality reduction to raw data from sensors (resampling with cubic interpolation and principal component analysis). Experimental tests were conducted using the UC2017 hand gesture dataset with samples from eight different subjects. The classification models show an accuracy of 95.6% for a library of 24 SGs with a random forest and 99.3% for 10 DGs using artificial neural networks. These results compare equally or favorably with different commonly used classifiers. Long short-term memory deep networks achieved similar performance in online frame-by-frame classification using raw incomplete data, performing better in terms of accuracy than static models with specially crafted features, but worse in training and inference time. The recognized gestures are used to teleoperate a robot in a collaborative process that consists in preparing a breakfast meal.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Improving novelty detection with generative adversarial networks on hand gesture data
Authors:
Miguel Simão,
Pedro Neto,
Olivier Gibaru
Abstract:
We propose a novel way of solving the issue of classification of out-of-vocabulary gestures using Artificial Neural Networks (ANNs) trained in the Generative Adversarial Network (GAN) framework. A generative model augments the data set in an online fashion with new samples and stochastic target vectors, while a discriminative model determines the class of the samples. The approach was evaluated on…
▽ More
We propose a novel way of solving the issue of classification of out-of-vocabulary gestures using Artificial Neural Networks (ANNs) trained in the Generative Adversarial Network (GAN) framework. A generative model augments the data set in an online fashion with new samples and stochastic target vectors, while a discriminative model determines the class of the samples. The approach was evaluated on the UC2017 SG and UC2018 DualMyo data sets. The generative models performance was measured with a distance metric between generated and real samples. The discriminative models were evaluated by their accuracy on trained and novel classes. In terms of sample generation quality, the GAN is significantly better than a random distribution (noise) in mean distance, for all classes. In the classification tests, the baseline neural network was not capable of identifying untrained gestures. When the proposed methodology was implemented, we found that there is a trade-off between the detection of trained and untrained gestures, with some trained samples being mistaken as novelty. Nevertheless, a novelty detection accuracy of 95.4% or 90.2% (depending on the data set) was achieved with just 5% loss of accuracy on trained classes.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Deep reinforcement learning applied to an assembly sequence planning problem with user preferences
Authors:
Miguel Neves,
Pedro Neto
Abstract:
Deep reinforcement learning (DRL) has demonstrated its potential in solving complex manufacturing decision-making problems, especially in a context where the system learns over time with actual operation in the absence of training data. One interesting and challenging application for such methods is the assembly sequence planning (ASP) problem. In this paper, we propose an approach to the implemen…
▽ More
Deep reinforcement learning (DRL) has demonstrated its potential in solving complex manufacturing decision-making problems, especially in a context where the system learns over time with actual operation in the absence of training data. One interesting and challenging application for such methods is the assembly sequence planning (ASP) problem. In this paper, we propose an approach to the implementation of DRL methods in ASP. The proposed approach introduces in the RL environment parametric actions to improve training time and sample efficiency and uses two different reward signals: (1) user's preferences and (2) total assembly time duration. The user's preferences signal addresses the difficulties and non-ergonomic properties of the assembly faced by the human and the total assembly time signal enforces the optimization of the assembly. Three of the most powerful deep RL methods were studied, Advantage Actor-Critic (A2C), Deep Q-Learning (DQN), and Rainbow, in two different scenarios: a stochastic and a deterministic one. Finally, the performance of the DRL algorithms was compared to tabular Q-Learnings performance. After 10,000 episodes, the system achieved near optimal behaviour for the algorithms tabular Q-Learning, A2C, and Rainbow. Though, for more complex scenarios, the algorithm tabular Q-Learning is expected to underperform in comparison to the other 2 algorithms. The results support the potential for the application of deep reinforcement learning in assembly sequence planning problems with human interaction.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Event-based tracking of human hands
Authors:
Laura Duarte,
Mohammad Safeea,
Pedro Neto
Abstract:
This paper proposes a novel method for human hands tracking using data from an event camera. The event camera detects changes in brightness, measuring motion, with low latency, no motion blur, low power consumption and high dynamic range. Captured frames are analysed using lightweight algorithms reporting 3D hand position data. The chosen pick-and-place scenario serves as an example input for coll…
▽ More
This paper proposes a novel method for human hands tracking using data from an event camera. The event camera detects changes in brightness, measuring motion, with low latency, no motion blur, low power consumption and high dynamic range. Captured frames are analysed using lightweight algorithms reporting 3D hand position data. The chosen pick-and-place scenario serves as an example input for collaborative human-robot interactions and in obstacle avoidance for human-robot safety applications. Events data are pre-processed into intensity frames. The regions of interest (ROI) are defined through object edge event activity, reducing noise. ROI features are extracted for use in-depth perception. Event-based tracking of human hand demonstrated feasible, in real time and at a low computational cost. The proposed ROI-finding method reduces noise from intensity images, achieving up to 89% of data reduction in relation to the original, while preserving the features. The depth estimation error in relation to ground truth (measured with wearables), measured using dynamic time war** and using a single event camera, is from 15 to 30 millimetres, depending on the plane it is measured. Tracking of human hands in 3D space using a single event camera data and lightweight algorithms to define ROI features (hands tracking in space).
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Anthropomorphic finger for gras** applications: 3D printed endoskeleton in a soft skin
Authors:
Mahmoud Tavakoli,
Andriy Sayuk,
João Lourenço,
Pedro Neto
Abstract:
Application of soft and compliant joints in gras** mechanisms received an increasing attention during recent years. This article suggests the design and development of a novel bio-inspired compliant finger which is composed of a 3D printed rigid endoskeleton covered by a soft matter. The overall integrated system resembles a biological structure in which a finger presents an anthropomorphic look…
▽ More
Application of soft and compliant joints in gras** mechanisms received an increasing attention during recent years. This article suggests the design and development of a novel bio-inspired compliant finger which is composed of a 3D printed rigid endoskeleton covered by a soft matter. The overall integrated system resembles a biological structure in which a finger presents an anthropomorphic look. The mechanical properties of such structure are enhanced through optimization of the repetitive geometrical structures that constructs a flexure bearing as a joint for the fingers. The endoskeleton is formed by additive manufacturing of such geometries with rigid materials. The geometry of the endoskeleton was studied by finite element analysis (FEA) to obtain the desired properties: high stiffness against lateral deflection and twisting, and low stiffness in the desired bending axis of the fingers. Results are validated by experimental analysis.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
A Flexible Piezoresistive/Self-Capacitive Hybrid Force and Proximity Sensor to Interface Collaborative Robots
Authors:
Diogo Fonseca,
Mohammad Safeea,
Pedro Neto
Abstract:
Force and proximity sensors are key in robotics, especially when applied in collaborative robots that interact physically or cognitively with humans in real unstructured environments. However, most existing sensors for use in robotics are limited by: 1) their scope, measuring single parameters/events and often requiring multiple types of sensors, 2) being expensive to manufacture, limiting their u…
▽ More
Force and proximity sensors are key in robotics, especially when applied in collaborative robots that interact physically or cognitively with humans in real unstructured environments. However, most existing sensors for use in robotics are limited by: 1) their scope, measuring single parameters/events and often requiring multiple types of sensors, 2) being expensive to manufacture, limiting their use to where they are strictly necessary and often compromising redundancy, and 3) have null or reduced physical flexibility, requiring further costs with adaptation to a variety of robot structures. This paper presents a novel mechanically flexible force and proximity hybrid sensor based on piezoresistive and self-capacitive phenomena. The sensor is inexpensive and easy to apply even on complex-shaped robot structures. The manufacturing process is described, including controlling circuits, mechanical design, and data acquisition. Experimental trials featuring the characterisation of the sensor were conducted, focusing on both force-electrical resistance and self-capacitive proximity response. The sensor's versatility, flexibility, thinness (1 mm thickness), accuracy (reduced drift) and repeatability demonstrated its applicability in several domains. Finally, the sensor was successfully applied in two distinct situations: hand guiding a robot (by touch commands), and human-robot collision avoidance (by proximity detection).
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
Classification of Primitive Manufacturing Tasks from Filtered Event Data
Authors:
Laura Duarte,
Pedro Neto
Abstract:
Collaborative robots are increasingly present in industry to support human activities. However, to make the human-robot collaborative process more effective, there are several challenges to be addressed. Collaborative robotic systems need to be aware of the human activities to (1) anticipate collaborative/assistive actions, (2) learn by demonstration, and (3) activate safety procedures in shared w…
▽ More
Collaborative robots are increasingly present in industry to support human activities. However, to make the human-robot collaborative process more effective, there are several challenges to be addressed. Collaborative robotic systems need to be aware of the human activities to (1) anticipate collaborative/assistive actions, (2) learn by demonstration, and (3) activate safety procedures in shared workspace. This study proposes an action classification system to recognize primitive assembly tasks from human motion events data captured by a Dynamic and Active-pixel Vision Sensor (DAVIS). Several filters are compared and combined to remove event data noise. Task patterns are classified from a continuous stream of event data using advanced deep learning and recurrent networks to classify spatial and temporal features. Experiments were conducted on a novel dataset, the dataset of manufacturing tasks (DMT22), featuring 5 classes of representative manufacturing primitives (PickUp, Place, Screw, Hold, Idle) from 5 participants. Results show that the proposed filters remove about 65\% of all events (noise) per recording, conducting to a classification accuracy up to 99,37\% for subjects that trained the system and 97.08\% for new subjects. Data from a left-handed subject were successfully classified using only right-handed training data. These results are object independent.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
An interpretable machine learning system for colorectal cancer diagnosis from pathology slides
Authors:
Pedro C. Neto,
Diana Montezuma,
Sara P. Oliveira,
Domingos Oliveira,
João Fraga,
Ana Monteiro,
João Monteiro,
Liliana Ribeiro,
Sofia Gonçalves,
Stefan Reinhard,
Inti Zlobec,
Isabel M. Pinto,
Jaime S. Cardoso
Abstract:
Considering the profound transformation affecting pathology practice, we aimed to develop a scalable artificial intelligence (AI) system to diagnose colorectal cancer from whole-slide images (WSI). For this, we propose a deep learning (DL) system that learns from weak labels, a sampling strategy that reduces the number of training samples by a factor of six without compromising performance, an app…
▽ More
Considering the profound transformation affecting pathology practice, we aimed to develop a scalable artificial intelligence (AI) system to diagnose colorectal cancer from whole-slide images (WSI). For this, we propose a deep learning (DL) system that learns from weak labels, a sampling strategy that reduces the number of training samples by a factor of six without compromising performance, an approach to leverage a small subset of fully annotated samples, and a prototype with explainable predictions, active learning features and parallelisation. Noting some problems in the literature, this study is conducted with one of the largest WSI colorectal samples dataset with approximately 10,500 WSIs. Of these samples, 900 are testing samples. Furthermore, the robustness of the proposed method is assessed with two additional external datasets (TCGA and PAIP) and a dataset of samples collected directly from the proposed prototype. Our proposed method predicts, for the patch-based tiles, a class based on the severity of the dysplasia and uses that information to classify the whole slide. It is trained with an interpretable mixed-supervision scheme to leverage the domain knowledge introduced by pathologists through spatial annotations. The mixed-supervision scheme allowed for an intelligent sampling strategy effectively evaluated in several different scenarios without compromising the performance. On the internal dataset, the method shows an accuracy of 93.44% and a sensitivity between positive (low-grade and high-grade dysplasia) and non-neoplastic samples of 0.996. On the external test samples varied with TCGA being the most challenging dataset with an overall accuracy of 84.91% and a sensitivity of 0.996.
△ Less
Submitted 30 April, 2024; v1 submitted 6 January, 2023;
originally announced January 2023.
-
UAS in the Airspace: A Review on Integration, Simulation, Optimization, and Open Challenges
Authors:
Euclides Carlos Pinto Neto,
Derick Moreira Baum,
Jorge Rady de Almeida Jr.,
Joao Batista Camargo Jr.,
Paulo Sergio Cugnasca
Abstract:
Air transportation is essential for society, and it is increasing gradually due to its importance. To improve the airspace operation, new technologies are under development, such as Unmanned Aircraft Systems (UAS). In fact, in the past few years, there has been a growth in UAS numbers in segregated airspace. However, there is an interest in integrating these aircraft into the National Airspace Sys…
▽ More
Air transportation is essential for society, and it is increasing gradually due to its importance. To improve the airspace operation, new technologies are under development, such as Unmanned Aircraft Systems (UAS). In fact, in the past few years, there has been a growth in UAS numbers in segregated airspace. However, there is an interest in integrating these aircraft into the National Airspace System (NAS). The UAS is vital to different industries due to its advantages brought to the airspace (e.g., efficiency). Conversely, the relationship between UAS and Air Traffic Control (ATC) needs to be well-defined due to the impacts on ATC capacity these aircraft may present. Throughout the years, this impact may be lower than it is nowadays because the current lack of familiarity in this relationship contributes to higher workload levels. Thereupon, the primary goal of this research is to present a comprehensive review of the advancements in the integration of UAS in the National Airspace System (NAS) from different perspectives. We consider the challenges regarding simulation, final approach, and optimization of problems related to the interoperability of such systems in the airspace. Finally, we identify several open challenges in the field based on the existing state-of-the-art proposals.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
PIC-Score: Probabilistic Interpretable Comparison Score for Optimal Matching Confidence in Single- and Multi-Biometric (Face) Recognition
Authors:
Pedro C. Neto,
Ana F. Sequeira,
Jaime S. Cardoso,
Philipp Terhörst
Abstract:
In the context of biometrics, matching confidence refers to the confidence that a given matching decision is correct. Since many biometric systems operate in critical decision-making processes, such as in forensics investigations, accurately and reliably stating the matching confidence becomes of high importance. Previous works on biometric confidence estimation can well differentiate between high…
▽ More
In the context of biometrics, matching confidence refers to the confidence that a given matching decision is correct. Since many biometric systems operate in critical decision-making processes, such as in forensics investigations, accurately and reliably stating the matching confidence becomes of high importance. Previous works on biometric confidence estimation can well differentiate between high and low confidence, but lack interpretability. Therefore, they do not provide accurate probabilistic estimates of the correctness of a decision. In this work, we propose a probabilistic interpretable comparison (PIC) score that accurately reflects the probability that the score originates from samples of the same identity. We prove that the proposed approach provides optimal matching confidence. Contrary to other approaches, it can also optimally combine multiple samples in a joint PIC score which further increases the recognition and confidence estimation performance. In the experiments, the proposed PIC approach is compared against all biometric confidence estimation methods available on four publicly available databases and five state-of-the-art face recognition systems. The results demonstrate that PIC has a significantly more accurate probabilistic interpretation than similar approaches and is highly effective for multi-biometric recognition. The code is publicly-available.
△ Less
Submitted 21 April, 2023; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Bug Analysis in Jupyter Notebook Projects: An Empirical Study
Authors:
Taijara Loiola de Santana,
Paulo Anselmo da Mota Silveira Neto,
Eduardo Santana de Almeida,
Iftekhar Ahmed
Abstract:
Computational notebooks, such as Jupyter, have been widely adopted by data scientists to write code for analyzing and visualizing data. Despite their growing adoption and popularity, there has been no thorough study to understand Jupyter development challenges from the practitioners' point of view. This paper presents a systematic study of bugs and challenges that Jupyter practitioners face throug…
▽ More
Computational notebooks, such as Jupyter, have been widely adopted by data scientists to write code for analyzing and visualizing data. Despite their growing adoption and popularity, there has been no thorough study to understand Jupyter development challenges from the practitioners' point of view. This paper presents a systematic study of bugs and challenges that Jupyter practitioners face through a large-scale empirical investigation. We mined 14,740 commits from 105 GitHub open-source projects with Jupyter notebook code. Next, we analyzed 30,416 Stack Overflow posts which gave us insights into bugs that practitioners face when develo** Jupyter notebook projects. Finally, we conducted nineteen interviews with data scientists to uncover more details about Jupyter bugs and to gain insights into Jupyter developers' challenges. We propose a bug taxonomy for Jupyter projects based on our results. We also highlight bug categories, their root causes, and the challenges that Jupyter practitioners face.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
Intuitive Robot Programming by Capturing Human Manufacturing Skills: A Framework for the Process of Glass Adhesive Application
Authors:
Mihail Babcinschi,
Francisco Cruz,
Nicole Duarte,
Silvia Santos,
Samuel Alves,
Pedro Neto
Abstract:
There is a great demand for the robotization of manufacturing processes fea-turing monotonous labor. Some manufacturing tasks requiring specific skills (welding, painting, etc.) suffer from a lack of workers. Robots have been used in these tasks, but their flexibility is limited since they are still difficult to program/re-program by non-experts, making them inaccessible to most companies. Robot o…
▽ More
There is a great demand for the robotization of manufacturing processes fea-turing monotonous labor. Some manufacturing tasks requiring specific skills (welding, painting, etc.) suffer from a lack of workers. Robots have been used in these tasks, but their flexibility is limited since they are still difficult to program/re-program by non-experts, making them inaccessible to most companies. Robot offline programming (OLP) is reliable. However, generat-ed paths directly from CAD/CAM do not include relevant parameters repre-senting human skills such as robot end-effector orientations and velocities. This paper presents an intuitive robot programming system to capture human manufacturing skills and transform them into robot programs. Demonstra-tions from human skilled workers are recorded using a magnetic tracking system attached to the worker tools. Collected data include the orientations and velocity of the working paths. Positional data are extracted from CAD/CAM since its error when captured by the magnetic tracker, is signifi-cant. Paths poses are transformed in Cartesian space and validated in a simu-lation environment. Robot programs are generated and transferred to the real robot. Experiments on the process of glass adhesive application demonstrat-ed the intuitiveness to use and effectiveness of the proposed framework in capturing human skills and transferring them to the robot.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Causality-Inspired Taxonomy for Explainable Artificial Intelligence
Authors:
Pedro C. Neto,
Tiago Gonçalves,
João Ribeiro Pinto,
Wilson Silva,
Ana F. Sequeira,
Arun Ross,
Jaime S. Cardoso
Abstract:
As two sides of the same coin, causality and explainable artificial intelligence (xAI) were initially proposed and developed with different goals. However, the latter can only be complete when seen through the lens of the causality framework. As such, we propose a novel causality-inspired framework for xAI that creates an environment for the development of xAI approaches. To show its applicability…
▽ More
As two sides of the same coin, causality and explainable artificial intelligence (xAI) were initially proposed and developed with different goals. However, the latter can only be complete when seen through the lens of the causality framework. As such, we propose a novel causality-inspired framework for xAI that creates an environment for the development of xAI approaches. To show its applicability, biometrics was used as case study. For this, we have analysed 81 research papers on a myriad of biometric modalities and different tasks. We have categorised each of these methods according to our novel xAI Ladder and discussed the future directions of the field.
△ Less
Submitted 4 March, 2024; v1 submitted 19 August, 2022;
originally announced August 2022.
-
Blockchain-based traffic management for Advanced Air Mobility
Authors:
I. Romani de Oliveira,
T. Matsumoto,
E. C. Pinto Neto
Abstract:
The large public interest in Advanced Air Mobility (AAM) will soon lead to congested skies overhead cities, analogously to what happened with other transportation means, including commercial aviation. In the latter case, the combination of large distances and demanded number flights is such that a system with centralized control, with most of the decisions made by human operators, is safe. However…
▽ More
The large public interest in Advanced Air Mobility (AAM) will soon lead to congested skies overhead cities, analogously to what happened with other transportation means, including commercial aviation. In the latter case, the combination of large distances and demanded number flights is such that a system with centralized control, with most of the decisions made by human operators, is safe. However, for AAM, it is expected a much higher demand, because it will be used for people's daily commutes. Thus, higher automation levels will become a requirement for coordinating this traffic, which might not be effectively managed by humans. The establishment of fixed air routes can abate complexity, however at the cost of limiting capacity and decreasing efficiency. Another alternative is the use of a powerful central system based on Artificial Intelligence (AI), which would allow flexible trajectories and higher efficiency. However, such system would require concentrated investment, could contain Single-Points-of-Failure (SPoFs), would be a highly sought target of malicious attacks, and would be subject to periods of unavailability.
This work proposes a new technology that solves the problem of managing the high complexity of the AAM traffic with a secure distributed approach, without the need for a proprietary centralized automation system. This technology enables distributed airspace allocation management and conflict resolution by means of trusted shared data structures and associated smart contracts running on a blockchain ecosystem. This way, it greatly reduces the risk of system outages due to SPoFs, by allowing peer-to-peer conflict resolution, and being more resilient to failures in the ground communication infrastructure. Furthermore, it provides priority-based balancing mechanisms that help to regulate fairness among participants in the utilization of the airspace.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
OrthoMAD: Morphing Attack Detection Through Orthogonal Identity Disentanglement
Authors:
Pedro C. Neto,
Tiago Gonçalves,
Marco Huber,
Naser Damer,
Ana F. Sequeira,
Jaime S. Cardoso
Abstract:
Morphing attacks are one of the many threats that are constantly affecting deep face recognition systems. It consists of selecting two faces from different individuals and fusing them into a final image that contains the identity information of both. In this work, we propose a novel regularisation term that takes into account the existent identity information in both and promotes the creation of t…
▽ More
Morphing attacks are one of the many threats that are constantly affecting deep face recognition systems. It consists of selecting two faces from different individuals and fusing them into a final image that contains the identity information of both. In this work, we propose a novel regularisation term that takes into account the existent identity information in both and promotes the creation of two orthogonal latent vectors. We evaluate our proposed method (OrthoMAD) in five different types of morphing in the FRLL dataset and evaluate the performance of our model when trained on five distinct datasets. With a small ResNet-18 as the backbone, we achieve state-of-the-art results in the majority of the experiments, and competitive results in the others. The code of this paper will be publicly available.
△ Less
Submitted 23 August, 2022; v1 submitted 16 August, 2022;
originally announced August 2022.
-
Identifying Source Code File Experts
Authors:
Otávio Cury,
Guilherme Avelino,
Pedro Santos Neto,
Ricardo Britto,
Marco Túlio Valente
Abstract:
In software development, the identification of source code file experts is an important task. Identifying these experts helps to improve software maintenance and evolution activities, such as develo** new features, code reviews, and bug fixes. Although some studies have proposed repository mining techniques to automatically identify source code experts, there are still gaps in this area that can…
▽ More
In software development, the identification of source code file experts is an important task. Identifying these experts helps to improve software maintenance and evolution activities, such as develo** new features, code reviews, and bug fixes. Although some studies have proposed repository mining techniques to automatically identify source code experts, there are still gaps in this area that can be explored. For example, investigating new variables related to source code knowledge and applying machine learning aiming to improve the performance of techniques to identify source code experts. The goal of this study is to investigate opportunities to improve the performance of existing techniques to recommend source code files experts. We built an oracle by collecting data from the development history and surveying developers of 113 software projects. Then, we use this oracle to: (i) analyze the correlation between measures extracted from the development history and the developers source code knowledge and (ii) investigate the use of machine learning classifiers by evaluating their performance in identifying source code files experts. First Authorship and Recency of Modification are the variables with the highest positive and negative correlations with source code knowledge, respectively. Machine learning classifiers outperformed the linear techniques (F-Measure = 71% to 73%) in the public dataset, but this advantage is not clear in the private dataset, with F-Measure ranging from 55% to 68% for the linear techniques and 58% to 67% for ML techniques. Overall, the linear techniques and the machine learning classifiers achieved similar performance, particularly if we analyze F-Measure. However, machine learning classifiers usually get higher precision while linear techniques obtained the highest recall values.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
SYN-MAD 2022: Competition on Face Morphing Attack Detection Based on Privacy-aware Synthetic Training Data
Authors:
Marco Huber,
Fadi Boutros,
Anh Thi Luu,
Kiran Raja,
Raghavendra Ramachandra,
Naser Damer,
Pedro C. Neto,
Tiago Gonçalves,
Ana F. Sequeira,
Jaime S. Cardoso,
João Tremoço,
Miguel Lourenço,
Sergio Serra,
Eduardo Cermeño,
Marija Ivanovska,
Borut Batagelj,
Andrej Kronovšek,
Peter Peer,
Vitomir Štruc
Abstract:
This paper presents a summary of the Competition on Face Morphing Attack Detection Based on Privacy-aware Synthetic Training Data (SYN-MAD) held at the 2022 International Joint Conference on Biometrics (IJCB 2022). The competition attracted a total of 12 participating teams, both from academia and industry and present in 11 different countries. In the end, seven valid submissions were submitted by…
▽ More
This paper presents a summary of the Competition on Face Morphing Attack Detection Based on Privacy-aware Synthetic Training Data (SYN-MAD) held at the 2022 International Joint Conference on Biometrics (IJCB 2022). The competition attracted a total of 12 participating teams, both from academia and industry and present in 11 different countries. In the end, seven valid submissions were submitted by the participating teams and evaluated by the organizers. The competition was held to present and attract solutions that deal with detecting face morphing attacks while protecting people's privacy for ethical and legal reasons. To ensure this, the training data was limited to synthetic data provided by the organizers. The submitted solutions presented innovations that led to outperforming the considered baseline in many experimental settings. The evaluation benchmark is now available at: https://github.com/marcohuber/SYN-MAD-2022.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
OCFR 2022: Competition on Occluded Face Recognition From Synthetically Generated Structure-Aware Occlusions
Authors:
Pedro C. Neto,
Fadi Boutros,
Joao Ribeiro Pinto,
Naser Damer,
Ana F. Sequeira,
Jaime S. Cardoso,
Messaoud Bengherabi,
Abderaouf Bousnat,
Sana Boucheta,
Nesrine Hebbadj,
Mustafa Ekrem Erakın,
Uğur Demir,
Hazım Kemal Ekenel,
Pedro Beber de Queiroz Vidal,
David Menotti
Abstract:
This work summarizes the IJCB Occluded Face Recognition Competition 2022 (IJCB-OCFR-2022) embraced by the 2022 International Joint Conference on Biometrics (IJCB 2022). OCFR-2022 attracted a total of 3 participating teams, from academia. Eventually, six valid submissions were submitted and then evaluated by the organizers. The competition was held to address the challenge of face recognition in th…
▽ More
This work summarizes the IJCB Occluded Face Recognition Competition 2022 (IJCB-OCFR-2022) embraced by the 2022 International Joint Conference on Biometrics (IJCB 2022). OCFR-2022 attracted a total of 3 participating teams, from academia. Eventually, six valid submissions were submitted and then evaluated by the organizers. The competition was held to address the challenge of face recognition in the presence of severe face occlusions. The participants were free to use any training data and the testing data was built by the organisers by synthetically occluding parts of the face images using a well-known dataset. The submitted solutions presented innovations and performed very competitively with the considered baseline. A major output of this competition is a challenging, realistic, and diverse, and publicly available occluded face recognition benchmark with well defined evaluation protocols.
△ Less
Submitted 15 August, 2022; v1 submitted 4 August, 2022;
originally announced August 2022.
-
Parametrized constant-depth quantum neuron
Authors:
Jonathan H. A. de Carvalho,
Fernando M. de Paula Neto
Abstract:
Quantum computing has been revolutionizing the development of algorithms. However, only noisy intermediate-scale quantum devices are available currently, which imposes several restrictions on the circuit implementation of quantum algorithms. In this paper, we propose a framework that builds quantum neurons based on kernel machines, where the quantum neurons differ from each other by their feature…
▽ More
Quantum computing has been revolutionizing the development of algorithms. However, only noisy intermediate-scale quantum devices are available currently, which imposes several restrictions on the circuit implementation of quantum algorithms. In this paper, we propose a framework that builds quantum neurons based on kernel machines, where the quantum neurons differ from each other by their feature space map**s. Besides contemplating previous schemes, our generalized framework can instantiate quantum neurons with other feature map**s. We present here a neuron that applies a tensor-product feature map** to an exponentially larger space. The proposed neuron is implemented by a circuit of constant depth with a linear number of elementary single-qubit gates. The existing neuron applies a phase-based feature map** with an exponentially expensive circuit implementation, even using multi-qubit gates. Additionally, the proposed neuron has parameters that can change its activation function shape. Here, we show the activation function shape of each quantum neuron. It turns out that parametrization allows the proposed neuron to optimally fit underlying patterns that the existing neuron cannot fit, as demonstrated in the toy problems addressed here. The feasibility of those quantum neuron solutions is also contemplated in the demonstration through executions on a quantum simulator. Finally, we compare those kernel-based quantum neurons in the problem of handwritten digit recognition, where the performances of quantum neurons that implement classical activation functions are also contrasted here. The repeated evidence of the parametrization potential achieved in real-life problems allows concluding that this work provides a quantum neuron with improved discriminative abilities. As a consequence, the generalized framework of quantum neurons can contribute toward practical quantum advantage.
△ Less
Submitted 28 September, 2023; v1 submitted 24 February, 2022;
originally announced February 2022.
-
An Open Platform for Research about Cognitive Load in Virtual Reality
Authors:
Olivier Augereau,
Gabriel Brocheton,
Pedro Paulo Do Prado Neto
Abstract:
The cognitive load can be used to assess if someone is struggling while performing a task. It can be used in many different situations such as in driving, piloting, studying, playing, working, etc. This information can help to design better systems and even to create interactive systems that can be aware of the user's cognitive load and adapt itself to the user. We propose an open source platform…
▽ More
The cognitive load can be used to assess if someone is struggling while performing a task. It can be used in many different situations such as in driving, piloting, studying, playing, working, etc. This information can help to design better systems and even to create interactive systems that can be aware of the user's cognitive load and adapt itself to the user. We propose an open source platform that can be used for doing research about cognitive load in virtual reality (VR). Our platform can be used for stimulating cognitive load through several VR scenes and for analyzing cognitive load through objective and subjective measurements.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Myope Models -- Are face presentation attack detection models short-sighted?
Authors:
Pedro C. Neto,
Ana F. Sequeira,
Jaime S. Cardoso
Abstract:
Presentation attacks are recurrent threats to biometric systems, where impostors attempt to bypass these systems. Humans often use background information as contextual cues for their visual system. Yet, regarding face-based systems, the background is often discarded, since face presentation attack detection (PAD) models are mostly trained with face crops. This work presents a comparative study of…
▽ More
Presentation attacks are recurrent threats to biometric systems, where impostors attempt to bypass these systems. Humans often use background information as contextual cues for their visual system. Yet, regarding face-based systems, the background is often discarded, since face presentation attack detection (PAD) models are mostly trained with face crops. This work presents a comparative study of face PAD models (including multi-task learning, adversarial training and dynamic frame selection) in two settings: with and without crops. The results show that the performance is consistently better when the background is present in the images. The proposed multi-task methodology beats the state-of-the-art results on the ROSE-Youtu dataset by a large margin with an equal error rate of 0.2%. Furthermore, we analyze the models' predictions with Grad-CAM++ with the aim to investigate to what extent the models focus on background elements that are known to be useful for human inspection. From this analysis we can conclude that the background cues are not relevant across all the attacks. Thus, showing the capability of the model to leverage the background information only when necessary.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
FocusFace: Multi-task Contrastive Learning for Masked Face Recognition
Authors:
Pedro C. Neto,
Fadi Boutros,
João Ribeiro Pinto,
Naser Damer,
Ana F. Sequeira,
Jaime S. Cardoso
Abstract:
SARS-CoV-2 has presented direct and indirect challenges to the scientific community. One of the most prominent indirect challenges advents from the mandatory use of face masks in a large number of countries. Face recognition methods struggle to perform identity verification with similar accuracy on masked and unmasked individuals. It has been shown that the performance of these methods drops consi…
▽ More
SARS-CoV-2 has presented direct and indirect challenges to the scientific community. One of the most prominent indirect challenges advents from the mandatory use of face masks in a large number of countries. Face recognition methods struggle to perform identity verification with similar accuracy on masked and unmasked individuals. It has been shown that the performance of these methods drops considerably in the presence of face masks, especially if the reference image is unmasked. We propose FocusFace, a multi-task architecture that uses contrastive learning to be able to accurately perform masked face recognition. The proposed architecture is designed to be trained from scratch or to work on top of state-of-the-art face recognition methods without sacrificing the capabilities of a existing models in conventional face recognition tasks. We also explore different approaches to design the contrastive learning module. Results are presented in terms of masked-masked (M-M) and unmasked-masked (U-M) face verification performance. For both settings, the results are on par with published methods, but for M-M specifically, the proposed method was able to outperform all the solutions that it was compared to. We further show that when using our method on top of already existing methods the training computational costs decrease significantly while retaining similar performances. The implementation and the trained models are available at GitHub.
△ Less
Submitted 1 November, 2021; v1 submitted 28 October, 2021;
originally announced October 2021.
-
EsmamDS: A more diverse exceptional survival model mining approach
Authors:
Juliana Barcellos Mattos,
Paulo S. G. de Mattos Neto,
Renato Vimieiro
Abstract:
A variety of works in the literature strive to uncover the factors associated with survival behaviour. However, the computational tools to provide such information are global models designed to predict if or when a (survival) event will occur. When approaching the problem of explaining differences in survival behaviour, those approaches rely on (assumptions of) predictive features followed by risk…
▽ More
A variety of works in the literature strive to uncover the factors associated with survival behaviour. However, the computational tools to provide such information are global models designed to predict if or when a (survival) event will occur. When approaching the problem of explaining differences in survival behaviour, those approaches rely on (assumptions of) predictive features followed by risk stratification. In other words, they lack the ability to discover new information on factors related to survival. In contrast, we approach such a problem from the perspective of descriptive supervised pattern mining to discover local patterns associated with different survival behaviours. Hence, we introduce the EsmamDS algorithm: an Exceptional Model Mining framework to provide straightforward characterisations of subgroups presenting unusual survival models -- given by the Kaplan-Meier estimates. This work builds on the Esmam algorithm to address the problem of pattern redundancy and provide a more informative and diverse characterisation of survival behaviour.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
My Eyes Are Up Here: Promoting Focus on Uncovered Regions in Masked Face Recognition
Authors:
Pedro C. Neto,
Fadi Boutros,
João Ribeiro Pinto,
Mohsen Saffari,
Naser Damer,
Ana F. Sequeira,
Jaime S. Cardoso
Abstract:
The recent Covid-19 pandemic and the fact that wearing masks in public is now mandatory in several countries, created challenges in the use of face recognition systems (FRS). In this work, we address the challenge of masked face recognition (MFR) and focus on evaluating the verification performance in FRS when verifying masked vs unmasked faces compared to verifying only unmasked faces. We propose…
▽ More
The recent Covid-19 pandemic and the fact that wearing masks in public is now mandatory in several countries, created challenges in the use of face recognition systems (FRS). In this work, we address the challenge of masked face recognition (MFR) and focus on evaluating the verification performance in FRS when verifying masked vs unmasked faces compared to verifying only unmasked faces. We propose a methodology that combines the traditional triplet loss and the mean squared error (MSE) intending to improve the robustness of an MFR system in the masked-unmasked comparison mode. The results obtained by our proposed method show improvements in a detailed step-wise ablation study. The conducted study showed significant performance gains induced by our proposed training paradigm and modified triplet loss on two evaluation databases.
△ Less
Submitted 18 August, 2021; v1 submitted 2 August, 2021;
originally announced August 2021.
-
A-star path planning simulation for UAS Traffic Management (UTM) application
Authors:
Carlos Augusto Pötter Neto,
Gustavo de Carvalho Bertoli,
Osamu Saotome
Abstract:
This paper presents a Robot Operating System and Gazebo application to calculate and simulate an optimal route for a drone in an urban environment by develo** new ROS packages and executing them along with open-source tools. Firstly, the current regulations about UAS are presented to guide the building of the simulated environment, and multiple path planning algorithms are reviewed to guide the…
▽ More
This paper presents a Robot Operating System and Gazebo application to calculate and simulate an optimal route for a drone in an urban environment by develo** new ROS packages and executing them along with open-source tools. Firstly, the current regulations about UAS are presented to guide the building of the simulated environment, and multiple path planning algorithms are reviewed to guide the search method selection. After selecting the A-star algorithm, both the 2D and 3D versions of them were implemented in this paper, with both Manhattan and Euclidean distances heuristics. The performance of these algorithms was evaluated considering the distance to be covered by the drone and the execution time of the route planning method, aiming to support algorithm's choice based on the environment in which it will be applied. The algorithm execution time was 3.2 and 17.2 higher when using the Euclidean distance for the 2D and 3D A-star algorithm, respectively. Along with the performance analysis of the algorithm, this paper is also the first step for building a complete UAS Traffic Management (UTM) system simulation using ROS and Gazebo.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
MFR 2021: Masked Face Recognition Competition
Authors:
Fadi Boutros,
Naser Damer,
Jan Niklas Kolf,
Kiran Raja,
Florian Kirchbuchner,
Raghavendra Ramachandra,
Arjan Kuijper,
Pengcheng Fang,
Chao Zhang,
Fei Wang,
David Montero,
Naiara Aginako,
Basilio Sierra,
Marcos Nieto,
Mustafa Ekrem Erakin,
Ugur Demir,
Hazim Kemal,
Ekenel,
Asaki Kataoka,
Kohei Ichikawa,
Shizuma Kubo,
Jie Zhang,
Mingjie He,
Dan Han,
Shiguang Shan
, et al. (10 additional authors not shown)
Abstract:
This paper presents a summary of the Masked Face Recognition Competitions (MFR) held within the 2021 International Joint Conference on Biometrics (IJCB 2021). The competition attracted a total of 10 participating teams with valid submissions. The affiliations of these teams are diverse and associated with academia and industry in nine different countries. These teams successfully submitted 18 vali…
▽ More
This paper presents a summary of the Masked Face Recognition Competitions (MFR) held within the 2021 International Joint Conference on Biometrics (IJCB 2021). The competition attracted a total of 10 participating teams with valid submissions. The affiliations of these teams are diverse and associated with academia and industry in nine different countries. These teams successfully submitted 18 valid solutions. The competition is designed to motivate solutions aiming at enhancing the face recognition accuracy of masked faces. Moreover, the competition considered the deployability of the proposed solutions by taking the compactness of the face recognition models into account. A private dataset representing a collaborative, multi-session, real masked, capture scenario is used to evaluate the submitted solutions. In comparison to one of the top-performing academic face recognition solutions, 10 out of the 18 submitted solutions did score higher masked face verification accuracy.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Multivariate Data Explanation by Jum** Emerging Patterns Visualization
Authors:
Mário Popolin Neto,
Fernando V. Paulovich
Abstract:
Visual Analytics (VA) tools and techniques have been instrumental in supporting users to build better classification models, interpret models' overall logic, and audit results. In a different direction, VA has recently been applied to transform classification models into descriptive mechanisms instead of predictive. The idea is to use such models as surrogates for data patterns, visualizing the mo…
▽ More
Visual Analytics (VA) tools and techniques have been instrumental in supporting users to build better classification models, interpret models' overall logic, and audit results. In a different direction, VA has recently been applied to transform classification models into descriptive mechanisms instead of predictive. The idea is to use such models as surrogates for data patterns, visualizing the model to understand the phenomenon represented by the data. Although very useful and inspiring, the few proposed approaches have opted to use low complex classification models to promote straightforward interpretation, presenting limitations to capture intricate data patterns. In this paper, we present VAX (multiVariate dAta eXplanation), a new VA method to support the identification and visual interpretation of patterns in multivariate datasets. Unlike the existing similar approaches, VAX uses the concept of Jum** Emerging Patterns to identify and aggregate several diversified patterns, producing explanations through logic combinations of data variables. The potential of VAX to interpret complex multivariate datasets is demonstrated through use cases employing two real-world datasets covering different scenarios.
△ Less
Submitted 18 November, 2022; v1 submitted 21 June, 2021;
originally announced June 2021.
-
On Applying the Lackadaisical Quantum Walk Algorithm to Search for Multiple Solutions on Grids
Authors:
Jonathan H. A. de Carvalho,
Luciano S. de Souza,
Fernando M. de Paula Neto,
Tiago A. E. Ferreira
Abstract:
Quantum computing promises to improve the information processing power to levels unreachable by classical computation. Quantum walks are heading the development of quantum algorithms for searching information on graphs more efficiently than their classical counterparts. A quantum-walk-based algorithm standing out in the literature is the lackadaisical quantum walk. The lackadaisical quantum walk i…
▽ More
Quantum computing promises to improve the information processing power to levels unreachable by classical computation. Quantum walks are heading the development of quantum algorithms for searching information on graphs more efficiently than their classical counterparts. A quantum-walk-based algorithm standing out in the literature is the lackadaisical quantum walk. The lackadaisical quantum walk is an algorithm developed to search graph structures whose vertices have a self-loop of weight $l$. This paper addresses several issues related to applying the lackadaisical quantum walk to search for multiple solutions on grids successfully. Firstly, we show that only one of the two stop** conditions found in the literature is suitable for simulations. We also demonstrate that the final success probability depends on both the space density of solutions and the relative distance between solutions. Furthermore, this work generalizes the lackadaisical quantum walk to search for multiple solutions on grids of arbitrary dimensions. In addition, we propose an optimal adjustment of the self-loop weight $l$ for such $d$-dimensional grids. It turns out other fits of $l$ found in the literature are particular cases. Finally, we observe a two-to-one relation between the steps of the lackadaisical quantum walk and Grover's algorithm, which requires modifications in the stop** condition. In conclusion, this work deals with practical issues one should consider when applying the lackadaisical quantum walk, besides expanding the technique to a broader range of search problems.
△ Less
Submitted 9 January, 2023; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Deep Learning Based Analysis of Prostate Cancer from MP-MRI
Authors:
Pedro C. Neto
Abstract:
The diagnosis of prostate cancer faces a problem with overdiagnosis that leads to damaging side effects due to unnecessary treatment. Research has shown that the use of multi-parametric magnetic resonance images to conduct biopsies can drastically help to mitigate the overdiagnosis, thus reducing the side effects on healthy patients. This study aims to investigate the use of deep learning techniqu…
▽ More
The diagnosis of prostate cancer faces a problem with overdiagnosis that leads to damaging side effects due to unnecessary treatment. Research has shown that the use of multi-parametric magnetic resonance images to conduct biopsies can drastically help to mitigate the overdiagnosis, thus reducing the side effects on healthy patients. This study aims to investigate the use of deep learning techniques to explore computer-aid diagnosis based on MRI as input. Several diagnosis problems ranging from classification of lesions as being clinically significant or not to the detection and segmentation of lesions are addressed with deep learning based approaches.
This thesis tackled two main problems regarding the diagnosis of prostate cancer. Firstly, XmasNet was used to conduct two large experiments on the classification of lesions. Secondly, detection and segmentation experiments were conducted, first on the prostate and afterward on the prostate cancer lesions. The former experiments explored the lesions through a two-dimensional space, while the latter explored models to work with three-dimensional inputs. For this task, the 3D models explored were the 3D U-Net and a pretrained 3D ResNet-18. A rigorous analysis of all these problems was conducted with a total of two networks, two crop** techniques, two resampling techniques, two crop sizes, five input sizes and data augmentations experimented for lesion classification. While for segmentation two models, two input sizes and data augmentations were experimented. However, while the binary classification of the clinical significance of lesions and the detection and segmentation of the prostate already achieve the desired results (0.870 AUC and 0.915 dice score respectively), the classification of the PIRADS score and the segmentation of lesions still have a large margin to improve (0.664 accuracy and 0.690 dice score respectively).
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
Integração e Entrega Contínua para aplicações móveis desenvolvidas em React Native
Authors:
Pedro José de Souza Neto,
Vinicius Cardoso Garcia
Abstract:
Continuous integration and continuous delivery are not new for developers who create web applications, however in the development of mobile applications this practice is still not very common mainly because of the challenges during the process of distributing the application. In the face of the growing number of applications, a greater requirement for quality and ever-shorter delivery times, deliv…
▽ More
Continuous integration and continuous delivery are not new for developers who create web applications, however in the development of mobile applications this practice is still not very common mainly because of the challenges during the process of distributing the application. In the face of the growing number of applications, a greater requirement for quality and ever-shorter delivery times, delivering a healthy code is often extremely important to keep up with the competition. The purpose of this work is to implement an integration and continuous delivery pipeline for mobile applications developed in React Native. It intends to automate the process of build and delivery of applications developed with this technology.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.