Showing 1–22 of 22 results for author: Nadeem, Q

Analysis of One-Bit Quantized Linear Precoding Schemes in Multi-Cell Massive MIMO Downlink

Authors: Qurrat-Ul-Ain Nadeem, Anas Chaaban

Abstract: This work studies a multi-cell one-bit massive multiple-input multiple-output (MIMO) system that employs one-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) at each base station (BS). We utilize Bussgang decomposition to derive downlink signal-to-quantization-plus-interference-plus-noise ratio (SQINR) and ergodic achievable rate expressions under one-bit quantized m… ▽ More This work studies a multi-cell one-bit massive multiple-input multiple-output (MIMO) system that employs one-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) at each base station (BS). We utilize Bussgang decomposition to derive downlink signal-to-quantization-plus-interference-plus-noise ratio (SQINR) and ergodic achievable rate expressions under one-bit quantized maximum ratio transmission (MRT) and zero-forcing (ZF) precoding schemes considering scenarios with and without pilot contamination (PC) in the derived channel estimates. The results are also simplified for the mixed architecture that employs full resolution (FR) ADCs and one-bit DACs, and the conventional architecture that employs FR ADCs and DACs. The SQINR is shown to decrease by a factor of $2/π$ and $4/π^2$ in the one-bit setting compared to that achieved in the mixed setting and conventional setting respectively under MRT precoding without PC. Interestingly, the decrease in SQINR is less when we consider PC, which is shown to adversely impact the conventional system more than the one-bit system. Similar insights are obtained under ZF precoding with the decrease in the SQINR with the use of one-bit ADCs and DACs being more pronounced. We utilize the derived expressions to yield performance insights related to power efficiency, the numbers of antennas needed by the three architectures to achieve the same sum-rate, and energy efficiency. △ Less

Submitted 23 December, 2023; originally announced December 2023.

Comments: Accepted in IEEE Transactions on Communications

Hybrid Digital-Wave Domain Channel Estimator for Stacked Intelligent Metasurface Enabled Multi-User MISO Systems

Authors: Qurrat-Ul-Ain Nadeem, Jiancheng An, Anas Chaaban

Abstract: Stacked intelligent metasurface (SIM) is an emerging programmable metasurface architecture that can implement signal processing directly in the electromagnetic wave domain, thereby enabling efficient implementation of ultra-massive multiple-input multiple-output (MIMO) transceivers with a limited number of radio frequency (RF) chains. Channel estimation (CE) is challenging for SIM-enabled communic… ▽ More Stacked intelligent metasurface (SIM) is an emerging programmable metasurface architecture that can implement signal processing directly in the electromagnetic wave domain, thereby enabling efficient implementation of ultra-massive multiple-input multiple-output (MIMO) transceivers with a limited number of radio frequency (RF) chains. Channel estimation (CE) is challenging for SIM-enabled communication systems due to the multi-layer architecture of SIM, and because we need to estimate large dimensional channels between the SIM and users with a limited number of RF chains. To efficiently solve this problem, we develop a novel hybrid digital-wave domain channel estimator, in which the received training symbols are first processed in the wave domain within the SIM layers, and then processed in the digital domain. The wave domain channel estimator, parametrized by the phase shifts applied by the meta-atoms in all layers, is optimized to minimize the mean squared error (MSE) using a gradient descent algorithm, within which the digital part is optimally updated. For an SIM-enabled multi-user system equipped with 4 RF chains and a 6-layer SIM with 64 meta-atoms each, the proposed estimator yields an MSE that is very close to that achieved by fully digital CE in a massive MIMO system employing 64 RF chains. This high CE accuracy is achieved at the cost of a training overhead that can be reduced by exploiting the potential low rank of channel correlation matrices. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Unit Cell Phase-Frequency Profile Optimization in RIS-Assisted Wide-Band OFDM Systems

Authors: Omran Abbas, Qurrat-Ul-Ain Nadeem, Loïc Markley, Anas Chaaban

Abstract: The reflection characteristics of a reconfigurable intelligent surface (RIS) depend on the phase response of the constituent unit cells, which is necessarily frequency dependent. This paper investigates the role of an RIS constituting unit cells with different phase-frequency profiles in a wide-band orthogonal frequency division multiplexing (OFDM) system to improve the achievable rate. We first p… ▽ More The reflection characteristics of a reconfigurable intelligent surface (RIS) depend on the phase response of the constituent unit cells, which is necessarily frequency dependent. This paper investigates the role of an RIS constituting unit cells with different phase-frequency profiles in a wide-band orthogonal frequency division multiplexing (OFDM) system to improve the achievable rate. We first propose a mathematical model for the phase-frequency relationship parametrized by the phase-frequency profile's slope and phase-shift corresponding to a realizable resonant RIS unit cell. Then, modelling each RIS element with $b$ control bits, we propose a method for selecting the parameter pairs to obtain a set of $2^b$ phase-frequency profiles. The proposed method yields an RIS design that outperforms existing designs over a wide range of user locations in a single-input, single-output (SISO) OFDM system. We then propose a low-complexity optimization algorithm to maximize the data rate through the joint optimization of (a) power allocations across the sub-carriers and (b) phase-frequency profile for each RIS unit cell from the available set. The analysis is then extended to a multi-user multiple-input single-output (MISO) OFDM scenario. Numerical results show an improvement in the coverage and achievable rates under the proposed framework as compared to single-slope phase-frequency profiles. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Holographic MIMO: How Many Antennas Do We Need for Energy Efficient Transmission?

Authors: Sarah Bahanshal, Qurrat-Ul-Ain Nadeem, Md. Jahangir Hossain

Abstract: Holographic multiple-input multiple-output (HMIMO) communication systems utilize spatially-constrained massive MIMO arrays containing large numbers of antennas with sub-wavelength spacing, and have emerged as a promising candidate technology for Sixth Generation (6G) networks. In this paper, we consider the downlink of a multi-user HMIMO communication system under a Fourier plane-wave series repre… ▽ More Holographic multiple-input multiple-output (HMIMO) communication systems utilize spatially-constrained massive MIMO arrays containing large numbers of antennas with sub-wavelength spacing, and have emerged as a promising candidate technology for Sixth Generation (6G) networks. In this paper, we consider the downlink of a multi-user HMIMO communication system under a Fourier plane-wave series representation of the stochastic electromagnetic MIMO channel model, and make two important contributions. First, we present a closed-form expression of the ergodic achievable downlink rate under maximum ratio transmission (MRT) precoding at the base station (BS). The derived expression explicitly shows the effect of the side-lengths of the HMIMO surfaces at the BS and each user, and the number of antennas deployed in these surfaces on the user rates. Second, we formulate an energy efficiency (EE) maximization problem with respect to the number of antennas arranged within spatially-constrained HMIMO surfaces at the BS and each user. The resulting implicit solution for this problem is shown to be globally optimal. Numerical results yield useful insights into the EE performance of multi-user HMIMO systems in different operating regimes. △ Less

Submitted 14 April, 2023; originally announced April 2023.

Performance Analysis of Zero-Forcing Precoding in Multi-Cell One-Bit Massive MIMO Downlink

Authors: Qurrat-Ul-Ain Nadeem, Anas Chaaban

Abstract: This work investigates the downlink performance of a multi-cell massive multiple-input multiple-output (MIMO) system that employs one-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) in the receiving and transmitting radio frequency (RF) chains at each base station (BS) in order to reduce the power consumption. We utilize Bussgang decomposition to derive the minimum… ▽ More This work investigates the downlink performance of a multi-cell massive multiple-input multiple-output (MIMO) system that employs one-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) in the receiving and transmitting radio frequency (RF) chains at each base station (BS) in order to reduce the power consumption. We utilize Bussgang decomposition to derive the minimum mean squared error (MMSE) channel estimates at each BS based on the quantized received uplink training signals, and the asymptotic closed-form expressions of the achievable downlink rates under one-bit quantized zero-forcing (ZF) precoding implemented using the estimated channels. The derived expressions explicitly show the impact of quantization noise, thermal noise, pilot contamination, and interference, and are utilized to study the number of additional antennas needed at each BS of the one-bit MIMO system to perform as well as the conventional MIMO system. Numerical results verify our analysis, and reveal that despite needing more antennas to achieve the same sum average rate, the one-bit massive MIMO system is more energy-efficient than the conventional system, especially at high sampling frequencies. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Performance Analysis under IRS-User Association for Distributed IRSs Assisted MISO Systems

Authors: Hibatallah Alwazani, Qurrat-Ul-Ain Nadeem, Anas Chaaban

Abstract: Distributed intelligent reflecting surfaces (IRSs) deployed in multi-user wireless communication systems promise improved system performance. However, the signal-to-interference-plus-noise ratio (SINR) analysis and IRSs optimization in such a system become challenging, due to the large number of involved parameters. The system optimization can be simplified if users are associated with IRSs, which… ▽ More Distributed intelligent reflecting surfaces (IRSs) deployed in multi-user wireless communication systems promise improved system performance. However, the signal-to-interference-plus-noise ratio (SINR) analysis and IRSs optimization in such a system become challenging, due to the large number of involved parameters. The system optimization can be simplified if users are associated with IRSs, which in turn focus on serving the associated users. We provide a practical theoretical framework for the average SINR analysis of a distributed IRSs-assisted multi-user MISO system, where IRSs are optimized to serve their associated users. In particular, we derive the average SINR expression under maximum ratio transmission (MRT) precoding at the BS and optimized reflect beamforming configurations at the IRSs. A successive refinement (SR) method is then outlined to optimize the IRS-user association parameters for the formulated max-min SINR problem which motivates user-fairness. Simulations validate the average SINR analysis while confirming the superiority of a distributed IRSs system over a centralized IRS system as well as the gains with optimized IRS-user association as compared to random association. △ Less

Submitted 3 November, 2021; originally announced November 2021.

Distributed Reconfigurable Intelligent Surfaces Assisted Wireless Communication: Asymptotic Analysis under Imperfect CSI

Authors: Bayan Al-Nahhas, Qurrat-Ul-Ain Nadeem, Anas Chaaban

Abstract: This work studies the net sum-rate performance of a distributed reconfigurable intelligent surfaces (RISs)-assisted multi-user multiple-input-single-output (MISO) downlink communication system under imperfect instantaneous-channel state information (I-CSI) to implement precoding at the base station (BS) and statistical-CSI (S-CSI) to design the RISs phase-shifts. Two channel estimation (CE) protoc… ▽ More This work studies the net sum-rate performance of a distributed reconfigurable intelligent surfaces (RISs)-assisted multi-user multiple-input-single-output (MISO) downlink communication system under imperfect instantaneous-channel state information (I-CSI) to implement precoding at the base station (BS) and statistical-CSI (S-CSI) to design the RISs phase-shifts. Two channel estimation (CE) protocols are considered for I-CSI acquisition: (i) a full CE protocol that estimates all direct and RISs-assisted channels over multiple training sub-phases, and (ii) a low-overhead direct estimation (DE) protocol that estimates the end-to-end channel in a single sub-phase. We derive the deterministic equivalents of signal-to-interference-plus-noise ratio (SINR) and ergodic net sum-rate under Rayleigh and Rician fading and both CE protocols, for given RISs phase-shifts, which are then optimized based on S-CSI. Simulation results reveal that the low-complexity DE protocol yields better net sum-rate than the full CE protocol when used to obtain CSI for precoding. A benchmark full I-CSI based RISs design is also outlined and shown to yield higher SINR but lower net sum-rate than the S-CSI based RISs design due to the large overhead associated with full I-CSI acquisition. Therefore the proposed DE-S-CSI based design for precoding and reflect beamforming achieves high net sum-rate with low complexity, overhead and power consumption. △ Less

Submitted 30 June, 2023; v1 submitted 20 August, 2021; originally announced August 2021.

Intelligent Reflecting Surface Enabled Random Rotations Scheme for the MISO Broadcast Channel

Authors: Qurrat-Ul-Ain Nadeem, Alessio Zappone, Anas Chaaban

Abstract: The current literature on intelligent reflecting surface (IRS) focuses on optimizing the IRS phase shifts to yield coherent beamforming gains, under the assumption of perfect channel state information (CSI) of individual IRS-assisted links, which is highly impractical. This work, instead, considers the random rotations scheme at the IRS in which the reflecting elements only employ random phase rot… ▽ More The current literature on intelligent reflecting surface (IRS) focuses on optimizing the IRS phase shifts to yield coherent beamforming gains, under the assumption of perfect channel state information (CSI) of individual IRS-assisted links, which is highly impractical. This work, instead, considers the random rotations scheme at the IRS in which the reflecting elements only employ random phase rotations without requiring any CSI. The only CSI then needed is at the base station (BS) of the overall channel to implement the beamforming transmission scheme. Under this framework, we derive the sum-rate scaling laws in the large number of users regime for the IRS-assisted multiple-input single-output (MISO) broadcast channel, with optimal dirty paper coding (DPC) scheme and the lower-complexity random beamforming (RBF) and deterministic beamforming (DBF) schemes at the BS. The random rotations scheme increases the sum-rate by exploiting multi-user diversity, but also compromises the gain to some extent due to correlation. Finally, energy efficiency maximization problems in terms of the number of BS antennas, IRS elements and transmit power are solved using the derived scaling laws. Simulation results show the proposed scheme to improve the sum-rate, with performance becoming close to that under coherent beamforming for a large number of users. △ Less

Submitted 17 March, 2021; originally announced March 2021.

Comments: Accepted in IEEE Transactions on Wireless Communications

Opportunistic Beamforming using an Intelligent Reflecting Surface Without Instantaneous CSI

Authors: Qurrat-Ul-Ain Nadeem, Anas Chaaban, Merouane Debbah

Abstract: While intelligent reflecting surface (IRS) assisted wireless communication has emerged as an important research paradigm, channel state information (CSI) acquisition remains a critical challenge to design the IRS phase-shifts and yield the promised coherent beamforming gains. In this paper, we propose an IRS-assisted opportunistic beamforming (OBF) scheme under proportional fair scheduling, which… ▽ More While intelligent reflecting surface (IRS) assisted wireless communication has emerged as an important research paradigm, channel state information (CSI) acquisition remains a critical challenge to design the IRS phase-shifts and yield the promised coherent beamforming gains. In this paper, we propose an IRS-assisted opportunistic beamforming (OBF) scheme under proportional fair scheduling, which does not require instantaneous CSI to design the IRS parameters. In a slow-fading environment, we show that with only random rotations at the IRS, the proposed scheme can capitalize on the multi-user (MU)-diversity effect to approach the performance of coherent beamforming as the number of users grows large. Next we study the sum-rate scaling of IRS-assisted OBF in the correlated Rayleigh fast fading environment under a deterministic beamforming scheme that results in a considerable sum-rate improvement. △ Less

Submitted 8 September, 2020; originally announced September 2020.

Comments: Accepted in IEEE Wireless Communications Letters

Intelligent Reflecting Surface Assisted MISO Downlink: Channel Estimation and Asymptotic Analysis

Authors: Bayan Al-Nahhas, Qurrat-Ul-Ain Nadeem, Anas Chaaban

Abstract: This work makes the preliminary contribution of studying the asymptotic performance of a multi-user intelligent reflecting surface (IRS) assisted-multiple-input single-output (MISO) downlink system under imperfect CSI. We first extend the existing least squares (LS) ON/OFF channel estimation protocol to a multi-user system, where we derive minimum mean squared error (MMSE) estimates of all IRS-ass… ▽ More This work makes the preliminary contribution of studying the asymptotic performance of a multi-user intelligent reflecting surface (IRS) assisted-multiple-input single-output (MISO) downlink system under imperfect CSI. We first extend the existing least squares (LS) ON/OFF channel estimation protocol to a multi-user system, where we derive minimum mean squared error (MMSE) estimates of all IRS-assisted channels over multiple sub-phases. We also consider a low-complexity direct estimation (DE) scheme, where the BS obtains the MMSE estimate of the overall channel in a single sub-phase. Under both protocols, the BS implements maximum ratio transmission (MRT) precoding while the IRS design is studied in the large system limit, where we derive deterministic equivalents of the signal-to-interference-plus-noise ratio (SINR) and the sum-rate. The derived asymptotic expressions, which depend only on channel statistics, reveal that under Rayleigh fading IRS-to-users channels, the IRS phase-shift values do not play a significant role in improving the sum-rate but the IRS still provides an array gain. Simulation results confirm the accuracy of the derived deterministic equivalents and show that under Rayleigh fading, the IRS gains are more significant in noise-limited scenarios. We also conclude that the DE of the overall channel yields better performance when considering large systems. △ Less

Submitted 18 August, 2020; originally announced August 2020.

Comments: Accepted in IEEE GLOBECOM 2020

Intelligent Reflecting Surface Assisted Multi-User MISO Communication: Channel Estimation and Beamforming Design

Authors: Qurrat-Ul-Ain Nadeem, Hibatallah Alwazani, Abla Kammoun, Anas Chaaban, Merouane Debbah, Mohamed-Slim Alouini

Abstract: The concept of reconfiguring wireless propagation environments using intelligent reflecting surfaces (IRS)s has recently emerged, where an IRS comprises of a large number of passive reflecting elements that can smartly reflect the im**ing electromagnetic waves for performance enhancement. Previous works have shown promising gains assuming the availability of perfect channel state information (CS… ▽ More The concept of reconfiguring wireless propagation environments using intelligent reflecting surfaces (IRS)s has recently emerged, where an IRS comprises of a large number of passive reflecting elements that can smartly reflect the im**ing electromagnetic waves for performance enhancement. Previous works have shown promising gains assuming the availability of perfect channel state information (CSI) at the base station (BS) and the IRS, which is impractical due to the passive nature of the reflecting elements. This paper makes one of the preliminary contributions of studying an IRS-assisted multi-user multiple-input single-output (MISO) communication system under imperfect CSI. Different from the few recent works that develop least-squares (LS) estimates of the IRS-assisted channel vectors, we exploit the prior knowledge of the large-scale fading statistics at the BS to derive the Bayesian minimum mean squared error (MMSE) channel estimates under a protocol in which the IRS applies a set of optimal phase shifts vectors over multiple channel estimation sub-phases. The resulting mean squared error (MSE) is both analytically and numerically shown to be lower than that achieved by the LS estimates. Joint designs for the precoding and power allocation at the BS and reflect beamforming at the IRS are proposed to maximize the minimum user signal-to-interference-plus-noise ratio (SINR) subject to a transmit power constraint. Performance evaluation results illustrate the efficiency of the proposed system and study its susceptibility to channel estimation errors. △ Less

Submitted 4 May, 2020; originally announced May 2020.

Comments: Accepted in IEEE OJCOMS

Multi-User Opportunistic Beamforming using Reconfigurable Surfaces

Authors: Qurrat-Ul-Ain Nadeem, Anas Chaaban, Merouane Debbah

Abstract: Multi-user (MU) diversity yields sum-rate gains by scheduling a user for transmission at times when its channel is near its peak. The only information required at the base station (BS) for scheduling is the users' signal-to-noise ratios (SNR)s. MU diversity gains are limited in environments with line-of-sight (LoS) channel components and/or spatial correlation. To remedy this, previous works have… ▽ More Multi-user (MU) diversity yields sum-rate gains by scheduling a user for transmission at times when its channel is near its peak. The only information required at the base station (BS) for scheduling is the users' signal-to-noise ratios (SNR)s. MU diversity gains are limited in environments with line-of-sight (LoS) channel components and/or spatial correlation. To remedy this, previous works have proposed opportunistic beamforming (OBF) using multiple antennas at the BS to transmit the same signal, modulated by time-varying gains, to the best user at each time slot. In this paper, we propose reconfigurable surface (RS)-assisted OBF to increase the range of channel fluctuations in a single-antenna broadcast channel (BC), where opportunistic scheduling (OS) strategy achieves the sum-rate capacity. The RS is abstracted as an array of passive reflecting elements, and is dumb in the sense that it only induces random phase shifts onto the im**ing electromagnetic waves, without requiring any channel state information. We develop the sum-rate scaling laws under Rayleigh, Rician and correlated Rayleigh fading and show that RS-assisted OBF with only a single-antenna BS outperforms multi-antenna BS-assisted OBF. We also extend our results to OFDMA systems and the multi-antenna BC. △ Less

Submitted 15 December, 2019; originally announced December 2019.

Comments: submitted to IEEE Transactions on Wireless Communications

Intelligent Reflecting Surface Assisted Wireless Communication: Modeling and Channel Estimation

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Anas Chaaban, Merouane Debbah, Mohamed-Slim Alouini

Abstract: The recently completed 5G new radio standard is a result of several cutting-edge technologies, including massive multiple-input multiple-output (MIMO), millimeter (mm)-Wave communication and network densification. However, these technologies face two main practical limitations 1) the lack of control over the wireless channel, and 2) the high power consumption of the wireless interface. To address… ▽ More The recently completed 5G new radio standard is a result of several cutting-edge technologies, including massive multiple-input multiple-output (MIMO), millimeter (mm)-Wave communication and network densification. However, these technologies face two main practical limitations 1) the lack of control over the wireless channel, and 2) the high power consumption of the wireless interface. To address the need for green and sustainable future cellular networks, the concept of reconfiguring wireless propagation environments using Intelligent Reflecting Surfaces (IRS)s has emerged. An IRS comprises of a large number of low-cost passive antennas that can smartly reflect the im**ing electromagnetic waves for performance enhancement. This paper looks at the evolution of the reflective radio concept towards IRSs, outlines the IRS-assisted multi-user multiple-input single-output (MISO) communication model and discusses how it differentiates from the conventional multi-antenna communication models. We propose a minimum mean squared error (MMSE) based channel estimation protocol for the design and analysis of IRS-assisted systems. Performance evaluation results at 2.5 GHz operating frequency are provided to illustrate the efficiency of the proposed system. △ Less

Submitted 13 December, 2019; v1 submitted 5 June, 2019; originally announced June 2019.

Asymptotic Analysis of RZF over Double Scattering Channels with MMSE Estimation

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Merouane Debbah, Mohamed-Slim Alouini

Abstract: This paper studies the ergodic rate performance of regularized zero-forcing (RZF) precoding in the downlink of a multi-user multiple-input single-output (MISO) system, where the channel between the base station (BS) and each user is modeled by the double scattering model. This non-Gaussian channel model is a function of both the antenna correlation and the structure of scattering in the propagatio… ▽ More This paper studies the ergodic rate performance of regularized zero-forcing (RZF) precoding in the downlink of a multi-user multiple-input single-output (MISO) system, where the channel between the base station (BS) and each user is modeled by the double scattering model. This non-Gaussian channel model is a function of both the antenna correlation and the structure of scattering in the propagation environment. This paper makes the preliminary contribution of deriving the minimum-mean-square-error (MMSE) channel estimate for this model. Then under the assumption that the users are divided into groups of common correlation matrices, this paper derives deterministic approximations of the signal-to-interference-plus-noise ratio (SINR) and the ergodic rate, which are almost surely tight in the limit that the number of BS antennas, the number of users and the number of scatterers in each group grow infinitely large. The derived results are expressed in a closed-form for the special case of multi-keyhole channels. Simulation results confirm the close match provided by the asymptotic analysis for moderate system dimensions. We show that the maximum number of users that can be supported simultaneously, while realizing large-scale MIMO gains, is equal to the number of scatterers. △ Less

Submitted 27 April, 2019; originally announced April 2019.

Comments: Accepted in IEEE Transactions on Wireless Communications

Asymptotic Max-Min SINR Analysis of Reconfigurable Intelligent Surface Assisted MISO Systems

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Anas Chaaban, Merouane Debbah, Mohamed-Slim Alouini

Abstract: This work focuses on the downlink of a single-cell multi-user system in which a base station (BS) equipped with $M$ antennas communicates with $K$ single-antenna users through a reconfigurable intelligent surface (RIS) installed in the line-of-sight (LoS) of the BS. RIS is envisioned to offer unprecedented spectral efficiency gains by utilizing $N$ passive reflecting elements that induce phase shi… ▽ More This work focuses on the downlink of a single-cell multi-user system in which a base station (BS) equipped with $M$ antennas communicates with $K$ single-antenna users through a reconfigurable intelligent surface (RIS) installed in the line-of-sight (LoS) of the BS. RIS is envisioned to offer unprecedented spectral efficiency gains by utilizing $N$ passive reflecting elements that induce phase shifts on the im**ing electromagnetic waves to smartly reconfigure the signal propagation environment. We study the minimum signal-to-interference-plus-noise ratio (SINR) achieved by the optimal linear precoder (OLP), that maximizes the minimum SINR subject to a given power constraint for any given RIS phase matrix, for the cases where the LoS channel matrix between the BS and the RIS is of rank-one and of full-rank. In the former scenario, the minimum SINR achieved by the RIS-assisted link is bounded by a quantity that goes to zero with $K$. For the high-rank scenario, we develop accurate deterministic approximations for the parameters of the asymptotically OLP, which are then utilized to optimize the RIS phase matrix. Simulation results show that RISs can outperform half-duplex relays with a small number of passive reflecting elements while large RISs are needed to outperform full-duplex relays. △ Less

Submitted 6 December, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Comments: Submitted to IEEE Transactions on Wireless Communications

Elevation Beamforming with Full Dimension MIMO Architectures in 5G Systems: A Tutorial

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Mohamed-Slim Alouini

Abstract: Full dimension (FD) multiple-input multiple-output (MIMO) technology has attracted substantial research attention from both wireless industry and academia in the last few years as a promising technique for next-generation wireless communication networks. FD-MIMO scenarios utilize a planar two-dimensional active antenna system (AAS) that not only allows a large number of antenna elements to be plac… ▽ More Full dimension (FD) multiple-input multiple-output (MIMO) technology has attracted substantial research attention from both wireless industry and academia in the last few years as a promising technique for next-generation wireless communication networks. FD-MIMO scenarios utilize a planar two-dimensional active antenna system (AAS) that not only allows a large number of antenna elements to be placed within feasible base station (BS) form factors, but also provides the ability of adaptive electronic beam control over both the elevation and the traditional azimuth dimensions. This paper presents a tutorial on elevation beamforming analysis for cellular networks utilizing FD Massive MIMO antenna arrays. In contrast to existing works that focus on the standardization of FD-MIMO in the 3rd Generation Partnership Project (3GPP), this tutorial is distinguished by its depth with respect to the theoretical aspects of antenna array and 3D channel modeling. In an attempt to bridge the gap between industry and academia, this preliminary tutorial introduces the relevant array and transceiver architecture designs proposed in the 3GPP Release 13 that enable elevation beamforming. Then it presents and compares two different 3D channel modeling approaches that can be utilized for the performance analysis of elevation beamforming techniques. The spatial correlation in FD-MIMO arrays is characterized and compared based on both channel modeling approaches and some insights into the impact of different channel and array parameters on the correlation are drawn. All these aspects are put together to provide a mathematical framework for the design of elevation beamforming schemes in single-cell and multi-cell scenarios. Simulation examples associated with comparisons and discussions are also presented. To this end, this paper highlights the state-of-the-art research and points out future research directions. △ Less

Submitted 5 June, 2019; v1 submitted 1 May, 2018; originally announced May 2018.

Comments: under review in IEEE Communications Surveys and Tutorials

Design of 5G Full Dimension Massive MIMO Systems

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Mérouane Debbah, and Mohamed-Slim Alouini

Abstract: Massive multiple-input-multiple-output (MIMO) transmission is a promising technology to improve the capacity and reliability of wireless systems. However, the number of antennas that can be equipped at a base station (BS) is limited by the BS form factor, posing a challenge to the deployment of massive linear arrays. To cope with this limitation, this work discusses Full Dimension MIMO (FD-MIMO),… ▽ More Massive multiple-input-multiple-output (MIMO) transmission is a promising technology to improve the capacity and reliability of wireless systems. However, the number of antennas that can be equipped at a base station (BS) is limited by the BS form factor, posing a challenge to the deployment of massive linear arrays. To cope with this limitation, this work discusses Full Dimension MIMO (FD-MIMO), which is currently an active area of research and standardization in the 3rd Generation Partnership Project (3GPP) for evolution towards fifth generation (5G) cellular systems. FD-MIMO utilizes an active antenna system (AAS) with a 2D planar array structure, which provides the ability of adaptive electronic beamforming in the 3D space. This paper presents the design of the AAS and the ongoing efforts in the 3GPP to develop the corresponding 3D channel model. Compact structure of large-scale antenna arrays drastically increases the spatial correlation in FD-MIMO systems. In order to account for its effects, the generalized spatial correlation functions for channels constituted by individual antenna elements and overall antenna ports in the AAS are derived. Exploiting the quasi-static channel covariance matrices of the users, the problem of determining the optimal downtilt weight vector for antenna ports, which maximizes the minimum signal-to-interference ratio of a multi-user multiple-input-single-output system, is formulated as a fractional optimization problem. A quasi-optimal solution is obtained through the application of semi-definite relaxation and Dinkelbach's method. Finally, the user-group specific elevation beamforming scenario is devised, which offers significant performance gains as confirmed through simulations. These results have direct application in the analysis of 5G FD-MIMO systems. △ Less

Submitted 1 May, 2018; v1 submitted 12 December, 2016; originally announced December 2016.

Journal ref: IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. 66, NO. 2, FEBRUARY 2018

3D Massive MIMO Systems: Modeling and Performance Analysis

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Merouane Debbah, Mohamed-Slim Alouini

Abstract: Multiple-input-multiple-output (MIMO) systems of current LTE releases are capable of adaptation in the azimuth only. Recently, the trend is to enhance system performance by exploiting the channel's degrees of freedom in the elevation, which necessitates the characterization of 3D channels. We present an information-theoretic channel model for MIMO systems that supports the elevation dimension. The… ▽ More Multiple-input-multiple-output (MIMO) systems of current LTE releases are capable of adaptation in the azimuth only. Recently, the trend is to enhance system performance by exploiting the channel's degrees of freedom in the elevation, which necessitates the characterization of 3D channels. We present an information-theoretic channel model for MIMO systems that supports the elevation dimension. The model is based on the principle of maximum entropy, which enables us to determine the distribution of the channel matrix consistent with the prior information on the angles. Based on this model, we provide analytical expression for the cumulative density function (CDF) of the mutual information (MI) for systems with a single receive and finite number of transmit antennas in the general signal-to-interference-plus-noise-ratio (SINR) regime. The result is extended to systems with finite receive antennas in the low SINR regime. A Gaussian approximation to the asymptotic behavior of MI distribution is derived for the large number of transmit antennas and paths regime. We corroborate our analysis with simulations that study the performance gains realizable through meticulous selection of the transmit antenna downtilt angles, confirming the potential of elevation beamforming to enhance system performance. The results are directly applicable to the analysis of 5G 3D-Massive MIMO-systems. △ Less

Submitted 20 April, 2016; originally announced April 2016.

Comments: 14 pages, 8 figures

Journal ref: IEEE Transactions on Wireless Communications, vol. 14, no. 12,pp. 6926-6939, Dec 2015

A Generalized Spatial Correlation Model for 3D MIMO Channels based on the Fourier Coefficients of Power Spectrums

Authors: Qurrat-Ul-Ain Nadeem, Abla Kammoun, Merouane Debbah, Mohamed-Slim Alouini

Abstract: Previous studies have confirmed the adverse impact of fading correlation on the mutual information (MI) of two-dimensional (2D) multiple-input multiple-output (MIMO) systems. More recently, the trend is to enhance the system performance by exploiting the channel's degrees of freedom in the elevation, which necessitates the derivation and characterization of three-dimensional (3D) channels in the p… ▽ More Previous studies have confirmed the adverse impact of fading correlation on the mutual information (MI) of two-dimensional (2D) multiple-input multiple-output (MIMO) systems. More recently, the trend is to enhance the system performance by exploiting the channel's degrees of freedom in the elevation, which necessitates the derivation and characterization of three-dimensional (3D) channels in the presence of spatial correlation. In this paper, an exact closed-form expression for the Spatial Correlation Function (SCF) is derived for 3D MIMO channels. This novel SCF is developed for a uniform linear array of antennas with nonisotropic antenna patterns. The proposed method resorts to the spherical harmonic expansion (SHE) of plane waves and the trigonometric expansion of Legendre and associated Legendre polynomials. The resulting expression depends on the underlying arbitrary angular distributions and antenna patterns through the Fourier Series (FS) coefficients of power azimuth and elevation spectrums. The novelty of the proposed method lies in the SCF being valid for any 3D propagation environment. The developed SCF determines the covariance matrices at the transmitter and the receiver that form the Kronecker channel model. In order to quantify the effects of correlation on the system performance, the information-theoretic deterministic equivalents of the MI for the Kronecker model are utilized in both mono-user and multi-user cases. Numerical results validate the proposed analytical expressions and elucidate the dependence of the system performance on azimuth and elevation angular spreads and antenna patterns. Some useful insights into the behaviour of MI as a function of downtilt angles are provided. The derived model will help evaluate the performance of correlated 3D MIMO channels in the future. △ Less

Submitted 21 April, 2015; originally announced April 2015.

Comments: Accepted in IEEE Transactions on signal processing

M-GEAR: Gateway-Based Energy-Aware Multi-Hop Routing Protocol for WSNs

Authors: Q. Nadeem, M. B. Rasheed, N. Javaid, Z. A. Khan, Y. Maqsood, A. Din

Abstract: In this research work, we advise gateway based energy-efficient routing protocol (M-GEAR) for Wireless Sensor Networks (WSNs). We divide the sensor nodes into four logical regions on the basis of their location in the sensing field. We install Base Station (BS) out of the sensing area and a gateway node at the centre of the sensing area. If the distance of a sensor node from BS or gateway is less… ▽ More In this research work, we advise gateway based energy-efficient routing protocol (M-GEAR) for Wireless Sensor Networks (WSNs). We divide the sensor nodes into four logical regions on the basis of their location in the sensing field. We install Base Station (BS) out of the sensing area and a gateway node at the centre of the sensing area. If the distance of a sensor node from BS or gateway is less than predefined distance threshold, the node uses direct communication. We divide the rest of nodes into two equal regions whose distance is beyond the threshold distance. We select cluster heads (CHs)in each region which are independent of the other region. These CHs are selected on the basis of a probability. We compare performance of our protocol with LEACH (Low Energy Adaptive Clustering Hierarchy). Performance analysis and compared statistic results show that our proposed protocol perform well in terms of energy consumption and network lifetime. △ Less

Submitted 26 July, 2013; originally announced July 2013.

Comments: IEEE 8th International Conference on Broadband and Wireless Computing, Communication and Applications (BWCCA'13), Compiegne, France

SIMPLE: Stable Increased-throughput Multi-hop Protocol for Link Efficiency in Wireless Body Area Networks

Authors: Q. Nadeem, N. Javaid, S. N. Mohammad, M. Y. Khan, S. Sarfraz, M. Gull

Abstract: In this work, we propose a reliable, power efficient and high throughput routing protocol for Wireless Body Area Networks (WBANs). We use multi-hop topology to achieve minimum energy consumption and longer network lifetime. We propose a cost function to select parent node or forwarder. Proposed cost function selects a parent node which has high residual energy and minimum distance to sink. Residua… ▽ More In this work, we propose a reliable, power efficient and high throughput routing protocol for Wireless Body Area Networks (WBANs). We use multi-hop topology to achieve minimum energy consumption and longer network lifetime. We propose a cost function to select parent node or forwarder. Proposed cost function selects a parent node which has high residual energy and minimum distance to sink. Residual energy parameter balances the energy consumption among the sensor nodes while distance parameter ensures successful packet delivery to sink. Simulation results show that our proposed protocol maximize the network stability period and nodes stay alive for longer period. Longer stability period contributes high packet delivery to sink which is major interest for continuous patient monitoring. △ Less

Submitted 26 July, 2013; originally announced July 2013.

Comments: IEEE 8th International Conference on Broadband and Wireless Computing, Communication and Applications (BWCCA'13), Compiegne, France

Q-LEACH: A New Routing Protocol for WSNs

Authors: B. Manzoor, N. Javaid, O. Rehman, M. Akbar, Q. Nadeem, A. Iqbal, M. Ishfaq

Abstract: Wireless Sensor Networks (WSNs) with their dynamic applications gained a tremendous attention of researchers. Constant monitoring of critical situations attracted researchers to utilize WSNs at vast platforms. The main focus in WSNs is to enhance network life-time as much as one could, for efficient and optimal utilization of resources. Different approaches based upon clustering are proposed for o… ▽ More Wireless Sensor Networks (WSNs) with their dynamic applications gained a tremendous attention of researchers. Constant monitoring of critical situations attracted researchers to utilize WSNs at vast platforms. The main focus in WSNs is to enhance network life-time as much as one could, for efficient and optimal utilization of resources. Different approaches based upon clustering are proposed for optimum functionality. Network life-time is always related with energy of sensor nodes deployed at remote areas for constant and fault tolerant monitoring. In this work, we propose Quadrature-LEACH (Q-LEACH) for homogenous networks which enhances stability period, network life-time and throughput quiet significantly. △ Less

Submitted 21 March, 2013; originally announced March 2013.

Journal ref: International Workshop on Body Area Sensor Networks (BASNet-2013) in conjunction with 4th International Conference on Ambient Systems, Networks and Technologies (ANT 2013), 2013, Halifax, Nova Scotia, Canada