Showing 1–50 of 64 results for author: Mosavi, A

Evaluating the Impact of Pair Documentation on Requirements Quality and Team Productivity

Authors: Nosheen Qamar, Nosheen Sabahat, Amir Mashmool, Amir Mosavi

Abstract: The most important deliverable of the requirements engineering process is the software requirements specification(SRS)document. Requirements documentation is important during the complete software development lifecycle to share the vision and effective communication between major stakeholders. The Standish Group reported that the top factors behind project failures are related to requirements. By… ▽ More The most important deliverable of the requirements engineering process is the software requirements specification(SRS)document. Requirements documentation is important during the complete software development lifecycle to share the vision and effective communication between major stakeholders. The Standish Group reported that the top factors behind project failures are related to requirements. By giving the right level of attention to key requirements good quality software can be produced. Therefore, more research is needed in this area and this study is trying to fill this gap. This empirical study aims to examine the importance of pair documentation. Unconventional documentation refers to the approach when two persons work on the same document's requirements collaboratively just like pair programming on the requirements quality and team productivity. Twenty pairs of documentation writers worked into two groups. one group using pair documentation, i.e., the experimental group, and the other one using conventional documentation, i.e., the control group. the resultant requirement's documents for the same project, produced by both groups were then compared. It is observed that there is a significant improvement in the quality and productivity of the experimental group using pair documentation. The findings of this study may assist requirement engineers in forming efficient teams that can create high-quality SRS documents. △ Less

Submitted 27 April, 2023; originally announced April 2023.

A Bayesian Framework on Asymmetric Mixture of Factor Analyser

Authors: Hamid Reza Safaeyan, Karim Zare, Mohamad R. Mahmoudi, Amir Mosavi

Abstract: Mixture of factor analyzer (MFA) model is an efficient model for the analysis of high dimensional data through which the factor-analyzer technique based on the covariance matrices reducing the number of free parameters. The model also provides an important methodology to determine latent groups in data. There are several pieces of research to extend the model based on the asymmetrical and/or with… ▽ More Mixture of factor analyzer (MFA) model is an efficient model for the analysis of high dimensional data through which the factor-analyzer technique based on the covariance matrices reducing the number of free parameters. The model also provides an important methodology to determine latent groups in data. There are several pieces of research to extend the model based on the asymmetrical and/or with outlier datasets with some known computational limitations that have been examined in frequentist cases. In this paper, an MFA model with a rich and flexible class of skew normal (unrestricted) generalized hyperbolic (called SUNGH) distributions along with a Bayesian structure with several computational benefits have been introduced. The SUNGH family provides considerable flexibility to model skewness in different directions as well as allowing for heavy tailed data. There are several desirable properties in the structure of the SUNGH family, including, an analytically flexible density which leads to easing up the computation applied for the estimation of parameters. Considering factor analysis models, the SUNGH family also allows for skewness and heavy tails for both the error component and factor scores. In the present study, the advantages of using this family of distributions have been discussed and the suitable efficiency of the introduced MFA model using real data examples and simulation has been demonstrated. △ Less

Submitted 4 November, 2022; v1 submitted 1 November, 2022; originally announced November 2022.

Comments: Due to some technical issues and a conflict of interest I wish to withdraw this manuscript

MSC Class: 68T07

Performance Evaluation of Query Plan Recommendation with Apache Hadoop and Apache Spark

Authors: Elham Azhir, Mehdi Hosseinzadeh, Faheem Khan, Amir Mosavi

Abstract: Access plan recommendation is a query optimization approach that executes new queries using prior created query execution plans (QEPs). The query optimizer divides the query space into clusters in the mentioned method. However, traditional clustering algorithms take a significant amount of execution time for clustering such large datasets. The MapReduce distributed computing model provides efficie… ▽ More Access plan recommendation is a query optimization approach that executes new queries using prior created query execution plans (QEPs). The query optimizer divides the query space into clusters in the mentioned method. However, traditional clustering algorithms take a significant amount of execution time for clustering such large datasets. The MapReduce distributed computing model provides efficient solutions for storing and processing vast quantities of data. Apache Spark and Apache Hadoop frameworks are used in the present investigation to cluster different sizes of query datasets in the MapReduce-based access plan recommendation method. The performance evaluation is performed based on execution time. The results of the experiments demonstrated the effectiveness of parallel query clustering in achieving high scalability. Furthermore, Apache Spark achieved better performance than Apache Hadoop, reaching an average speedup of 2x. △ Less

Submitted 17 September, 2022; originally announced October 2022.

Comments: 11pages, 4 figures

MSC Class: 68T05

A Secure Healthcare 5.0 System Based on Blockchain Technology Entangled with Federated Learning Technique

Authors: Abdur Rehman, Sagheer Abbas, M. A. Khan, Taher M. Ghazal, Khan Muhammad Adnan, Amir Mosavi

Abstract: In recent years, the global Internet of Medical Things (IoMT) industry has evolved at a tremendous speed. Security and privacy are key concerns on the IoMT, owing to the huge scale and deployment of IoMT networks. Machine learning (ML) and blockchain (BC) technologies have significantly enhanced the capabilities and facilities of healthcare 5.0, spawning a new area known as "Smart Healthcare." By… ▽ More In recent years, the global Internet of Medical Things (IoMT) industry has evolved at a tremendous speed. Security and privacy are key concerns on the IoMT, owing to the huge scale and deployment of IoMT networks. Machine learning (ML) and blockchain (BC) technologies have significantly enhanced the capabilities and facilities of healthcare 5.0, spawning a new area known as "Smart Healthcare." By identifying concerns early, a smart healthcare system can help avoid long-term damage. This will enhance the quality of life for patients while reducing their stress and healthcare costs. The IoMT enables a range of functionalities in the field of information technology, one of which is smart and interactive health care. However, combining medical data into a single storage location to train a powerful machine learning model raises concerns about privacy, ownership, and compliance with greater concentration. Federated learning (FL) overcomes the preceding difficulties by utilizing a centralized aggregate server to disseminate a global learning model. Simultaneously, the local participant keeps control of patient information, assuring data confidentiality and security. This article conducts a comprehensive analysis of the findings on blockchain technology entangled with federated learning in healthcare. 5.0. The purpose of this study is to construct a secure health monitoring system in healthcare 5.0 by utilizing a blockchain technology and Intrusion Detection System (IDS) to detect any malicious activity in a healthcare network and enables physicians to monitor patients through medical sensors and take necessary measures periodically by predicting diseases. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Comments: 20 pages, 6 tables, 3 figures

MSC Class: 68T07

Application of Group Method of Data Handling and New Optimization Algorithms for Predicting Sediment Transport Rate under Vegetation Cover

Authors: Golnaz Mirzakhani, Elham Ghanbari-Adivi, Rohollah Fattahi, Mohammad Ehteram, Amir Mosavi, Ali Najah Ahmed, Ahmed El-Shafieg

Abstract: Planting vegetation is one of the practical solutions for reducing sediment transfer rates. Increasing vegetation cover decreases environmental pollution and sediment transport rate (STR). Since sediments and vegetation interact complexly, predicting sediment transport rates is challenging. This study aims to predict sediment transport rate under vegetation cover using new and optimized versions o… ▽ More Planting vegetation is one of the practical solutions for reducing sediment transfer rates. Increasing vegetation cover decreases environmental pollution and sediment transport rate (STR). Since sediments and vegetation interact complexly, predicting sediment transport rates is challenging. This study aims to predict sediment transport rate under vegetation cover using new and optimized versions of the group method of data handling (GMDH). Additionally, this study introduces a new ensemble model for predicting sediment transport rates. Model inputs include wave height, wave velocity, density cover, wave force, D50, the height of vegetation cover, and cover stem diameter. A standalone GMDH model and optimized GMDH models, including GMDH honey badger algorithm (HBA) GMDH rat swarm algorithm (RSOA)vGMDH sine cosine algorithm (SCA), and GMDH particle swarm optimization (GMDH-PSO), were used to predict sediment transport rates. As the next step, the outputs of standalone and optimized GMDH were used to construct an ensemble model. The MAE of the ensemble model was 0.145 m3/s, while the MAEs of GMDH-HBA, GMDH-RSOA, GMDH-SCA, GMDH-PSOA, and GMDH in the testing level were 0.176 m3/s, 0.312 m3/s, 0.367 m3/s, 0.498 m3/s, and 0.612 m3/s, respectively. The Nash Sutcliffe coefficient (NSE) of ensemble model, GMDH-HBA, GMDH-RSOA, GMDH-SCA, GMDH-PSOA, and GHMDH were 0.95 0.93, 0.89, 0.86, 0.82, and 0.76, respectively. Additionally, this study demonstrated that vegetation cover decreased sediment transport rate by 90 percent. The results indicated that the ensemble and GMDH-HBA models could accurately predict sediment transport rates. Based on the results of this study, sediment transport rate can be monitored using the IMM and GMDH-HBA. These results are useful for managing and planning water resources in large basins. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Comments: 65 pages, 10 figures, 5 tables

MSC Class: 68T07

Prediction of the energy and exergy performance of F135 PW100 turbofan engine via deep learning

Authors: Mohammadreza Sabzehali, Amir Hossein Rabieeb, Mahdi Alibeigia, Amir Mosavi

Abstract: In the present study, the effects of flight-Mach number, flight altitude, fuel types, and intake air temperature on thrust specific fuel consumption, thrust, intake air mass flow rate, thermal and propulsive efficiecies, as well as the exergetic efficiency and the exergy destruction rate in F135 PW100 engine are investigated. Based on the results obtained in the first phase, to model the thermodyn… ▽ More In the present study, the effects of flight-Mach number, flight altitude, fuel types, and intake air temperature on thrust specific fuel consumption, thrust, intake air mass flow rate, thermal and propulsive efficiecies, as well as the exergetic efficiency and the exergy destruction rate in F135 PW100 engine are investigated. Based on the results obtained in the first phase, to model the thermodynamic performance of the aforementioned engine cycle, Flight-Mach number and flight altitude are considered to be 2.5 and 30,000 m, respectively; due to the operational advantage of supersonic flying at high altitude flight conditions, and the higher thrust of hydrogen fuel. Accordingly, in the second phase, taking into account the mentioned flight conditions, an intelligent model has been obtained to predict output parameters (i.e., thrust, thrust specific fuel consumption, and overall exergetic efficiency) using the deep learning method. In the attained deep neural model, the pressure ratio of the high-pressure turbine, fan pressure ratio, turbine inlet temperature, intake air temperature, and bypass ratio are considered input parameters. The provided datasets are randomly divided into two sets: the first one contains 6079 samples for model training and the second set contains 1520 samples for testing. In particular, the Adam optimization algorithm, the cost function of the mean square error, and the active function of rectified linear unit are used to train the network. The results show that the error percentage of the deep neural model is equal to 5.02%, 1.43%, and 2.92% to predict thrust, thrust specific fuel consumption, and overall exergetic efficiency, respectively, which indicates the success of the attained model in estimating the output parameters of the present problem. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: 41 pages, 13 figures, 4 tables

MSC Class: 68T07

Journal ref: Energy Conversion and Management, Volume 265, 2022, 115775, ISSN 0196-8904

Energy-Exergy Analysis and Optimal Design of a Hydrogen Turbofan Engine

Authors: Mohammadreza Sabzehali, Somayeh Davoodabadi Farahani, Amir Mosavi

Abstract: In this study, the effect of inlet air cooling and fuel type on the performance parameters of thrust-specific fuel consumption (TSFC), thermal and exergetic efficiencies, entropy generation rate, and Nitrogen oxide emission intensity index (SNOx) of the GENX 1B70 engine is analyzed in two states of take-off and on design. The results show that with a 20-degree delicious reduction in inlet air temp… ▽ More In this study, the effect of inlet air cooling and fuel type on the performance parameters of thrust-specific fuel consumption (TSFC), thermal and exergetic efficiencies, entropy generation rate, and Nitrogen oxide emission intensity index (SNOx) of the GENX 1B70 engine is analyzed in two states of take-off and on design. The results show that with a 20-degree delicious reduction in inlet air temperature on design conditions and JP10 fuel usage, the thermal efficiency and entropy generation rate, thrust and fuel mass flow rate, and TSFC of the engine increase by 1.85 percent, 16.51 percent, 11.76 percent, 10.53 percent, and 2.15 percent and SNOx and exergetic efficiency decrease by 2.11 percent and 26.60 percent, respectively. Also, optimization of the GENX 1B70 engine cycle as hydrogen fuel usage with three separate objective functions: thrust maximization, thermal efficiency maximization, and propulsive efficiency maximization on design point condition was performed based on the Genetic algorithm. Based on the economic approach and exero-environmental, the best cycles from the optimal states were selected using the TOPSIS algorithm. In on design conditions, entropy generation rate, nitrogen oxide production rate, and TSFC for the chosen cycle based on the economic approach +18.89 percent, +10.01 percent, and -0.21percent, respectively, and based on the exero-environmental approach -54.03percent, -42.02percent, and +21.44percent change compared to the base engine, respectively. △ Less

Submitted 14 August, 2022; originally announced August 2022.

Comments: 30 pages, 11 figures

MSC Class: 68U01

Computing High-Quality Solutions for the Patient Admission Scheduling Problem using Evolutionary Diversity Optimisation

Authors: Adel Nikfarjam, Amirhossein Moosavi, Aneta Neumann, Frank Neumann

Abstract: Diversification in a set of solutions has become a hot research topic in the evolutionary computation community. It has been proven beneficial for optimisation problems in several ways, such as computing a diverse set of high-quality solutions and obtaining robustness against imperfect modeling. For the first time in the literature, we adapt the evolutionary diversity optimisation for a real-world… ▽ More Diversification in a set of solutions has become a hot research topic in the evolutionary computation community. It has been proven beneficial for optimisation problems in several ways, such as computing a diverse set of high-quality solutions and obtaining robustness against imperfect modeling. For the first time in the literature, we adapt the evolutionary diversity optimisation for a real-world combinatorial problem, namely patient admission scheduling. We introduce an evolutionary algorithm to achieve structural diversity in a set of solutions subjected to the quality of each solution. We also introduce a mutation operator biased towards diversity maximisation. Finally, we demonstrate the importance of diversity for the aforementioned problem through a simulation. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Comments: To appear at PPSN 2022

Cyclocopula Technique to Study the Relationship Between Two Cyclostationary Time Series with Fractional Brownian Motion Errors

Authors: Mohammadreza Mahmoudi, Amir Mosavi

Abstract: Detection of the relationship between two time series is so important in environmental and hydrological studies. Several parametric and non-parametric approaches can be applied to detect relationships. These techniques are usually sensitive to stationarity assumptions. In this research, a new copula-based method is introduced to detect the relationship between two cylostationary time series with f… ▽ More Detection of the relationship between two time series is so important in environmental and hydrological studies. Several parametric and non-parametric approaches can be applied to detect relationships. These techniques are usually sensitive to stationarity assumptions. In this research, a new copula-based method is introduced to detect the relationship between two cylostationary time series with fractional Brownian motion (fBm) errors. The numerical studies verify the performance of the introduced approach. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 16 pages, t tables

MSC Class: 68U35

Journal ref: Fractals, Vol. 30, No. 5 (2022) 2240137

Comparative analysis of machine learning and numerical modeling for combined heat transfer in Polymethylmethacrylate

Authors: Mahsa Dehghan Manshadi, Nima Alafchi, Alireza Taat, Milad Mousavi, Amir Mosavi

Abstract: This study compares different methods to predict the simultaneous effects of conductive and radiative heat transfer in a Polymethylmethacrylate (PMMA) sample. PMMA is a kind of polymer utilized in various sensors and actuator devices. One-dimensional combined heat transfer is considered in numerical analysis. Computer implementation was obtained for the numerical solution of governing equation wit… ▽ More This study compares different methods to predict the simultaneous effects of conductive and radiative heat transfer in a Polymethylmethacrylate (PMMA) sample. PMMA is a kind of polymer utilized in various sensors and actuator devices. One-dimensional combined heat transfer is considered in numerical analysis. Computer implementation was obtained for the numerical solution of governing equation with the implicit finite difference method in the case of discretization. Kirchhoff transformation was used to get data from a non-linear equation of conductive heat transfer by considering monochromatic radiation intensity and temperature conditions applied to the PMMA sample boundaries. For Deep Neural Network (DNN) method, the novel Long Short Term Memory (LSTM) method was introduced to find accurate results in the least processing time than the numerical method. A recent study derived the combined heat transfers and their temperature profiles for the PMMA sample. Furthermore, the transient temperature profile is validated by another study. A comparison proves a perfect agreement. It shows the temperature gradient in the primary positions that makes a spectral amount of conductive heat transfer from a PMMA sample. It is more straightforward when they are compared with the novel DNN method. Results demonstrate that this artificial intelligence method is accurate and fast in predicting problems. By analyzing the results from the numerical solution it can be understood that the conductive and radiative heat flux is similar in the case of gradient behavior, but it is also twice in its amount approximately. Hence, total heat flux has a constant value in an approximated steady state condition. In addition to analyzing their composition, ROC curve and confusion matrix were implemented to evaluate the algorithm performance. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 15 pages, 11 figures

MSC Class: 68T07

Accurate Discharge Coefficient Prediction of Streamlined Weirs by Coupling Linear Regression and Deep Convolutional Gated Recurrent Unit

Authors: Weibin Chen, Danial Sharifrazi, Guoxi Liang, Shahab S. Band, Kwok Wing Chau, Amir Mosavi

Abstract: Streamlined weirs which are a nature-inspired type of weir have gained tremendous attention among hydraulic engineers, mainly owing to their established performance with high discharge coefficients. Computational fluid dynamics (CFD) is considered as a robust tool to predict the discharge coefficient. To bypass the computational cost of CFD-based assessment, the present study proposes data-driven… ▽ More Streamlined weirs which are a nature-inspired type of weir have gained tremendous attention among hydraulic engineers, mainly owing to their established performance with high discharge coefficients. Computational fluid dynamics (CFD) is considered as a robust tool to predict the discharge coefficient. To bypass the computational cost of CFD-based assessment, the present study proposes data-driven modeling techniques, as an alternative to CFD simulation, to predict the discharge coefficient based on an experimental dataset. To this end, after splitting the dataset using a k fold cross validation technique, the performance assessment of classical and hybrid machine learning deep learning (ML DL) algorithms is undertaken. Among ML techniques linear regression (LR) random forest (RF) support vector machine (SVM) k-nearest neighbor (KNN) and decision tree (DT) algorithms are studied. In the context of DL, long short-term memory (LSTM) convolutional neural network (CNN) and gated recurrent unit (GRU) and their hybrid forms such as LSTM GRU, CNN LSTM and CNN GRU techniques, are compared using different error metrics. It is found that the proposed three layer hierarchical DL algorithm consisting of a convolutional layer coupled with two subsequent GRU levels, which is also hybridized with the LR method, leads to lower error metrics. This paper paves the way for data-driven modeling of streamlined weirs. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Comments: 28 pages, 7 figures

MSC Class: 68T05

Journal ref: Engineering Applications of Computational Fluid Mechanics, 2022

Integration of neural network and fuzzy logic decision making compared with bilayered neural network in the simulation of daily dew point temperature

Authors: Guodao Zhang, Shahab S. Band, Sina Ardabili, Kwok-Wing Chau, Amir Mosavi

Abstract: In this research, dew point temperature (DPT) is simulated using the data-driven approach. Adaptive Neuro-Fuzzy Inference System (ANFIS) is utilized as a data-driven technique to forecast this parameter at Tabriz in East Azerbaijan. Various input patterns, namely T min, T max, and T mean, are utilized for training the architecture whilst DPT is the model's output. The findings indicate that, in ge… ▽ More In this research, dew point temperature (DPT) is simulated using the data-driven approach. Adaptive Neuro-Fuzzy Inference System (ANFIS) is utilized as a data-driven technique to forecast this parameter at Tabriz in East Azerbaijan. Various input patterns, namely T min, T max, and T mean, are utilized for training the architecture whilst DPT is the model's output. The findings indicate that, in general, ANFIS method is capable of identifying data patterns with a high degree of accuracy. However, the approach demonstrates that processing time and computer resources may substantially increase by adding additional functions. Based on the results, the number of iterations and computing resources might change dramatically if new functionalities are included. As a result, tuning parameters have to be optimized inside the method framework. The findings demonstrate a high agreement between results by the data-driven technique (machine learning method) and the observed data. Using this prediction toolkit, DPT can be adequately forecasted solely based on the temperature distribution of Tabriz. This kind of modeling is extremely promising for predicting DPT at various sites. Besides, this study thoroughly compares the Bilayered Neural Network (BNN) and ANFIS models on various scales. Whilst the ANFIS model is extremely stable for almost all numbers of membership functions, the BNN model is highly sensitive to this scale factor to predict DPT. △ Less

Submitted 13 April, 2022; v1 submitted 23 February, 2022; originally announced February 2022.

Comments: 18 pages, 15 figures

MSC Class: 68T07

GSVMA: A Genetic-Support Vector Machine-Anova method for CAD diagnosis based on Z-Alizadeh Sani dataset

Authors: Javad Hassannataj Joloudari, Faezeh Azizi, Mohammad Ali Nematollahi, Roohallah Alizadehsani, Edris Hassannataj, Amir Mosavi

Abstract: Coronary heart disease (CAD) is one of the crucial reasons for cardiovascular mortality in middle-aged people worldwide. The most typical tool is angiography for diagnosing CAD. The challenges of CAD diagnosis using angiography are costly and have side effects. One of the alternative solutions is the use of machine learning-based patterns for CAD diagnosis. Hence, this paper provides a new hybrid… ▽ More Coronary heart disease (CAD) is one of the crucial reasons for cardiovascular mortality in middle-aged people worldwide. The most typical tool is angiography for diagnosing CAD. The challenges of CAD diagnosis using angiography are costly and have side effects. One of the alternative solutions is the use of machine learning-based patterns for CAD diagnosis. Hence, this paper provides a new hybrid machine learning model called Genetic Support Vector Machine and Analysis of Variance (GSVMA). The ANOVA is known as the kernel function for SVM. The proposed model is performed based on the Z-Alizadeh Sani dataset. A genetic optimization algorithm is used to select crucial features. In addition, SVM with Anova, Linear SVM, and LibSVM with radial basis function methods were applied to classify the dataset. As a result, the GSVMA hybrid method performs better than other methods. This proposed method has the highest accuracy of 89.45% through a 10-fold cross-validation technique with 35 selected features on the Z-Alizadeh Sani dataset. Therefore, the genetic optimization algorithm is very effective for improving accuracy. The computer-aided GSVMA method can be helped clinicians with CAD diagnosis. △ Less

Submitted 23 July, 2021; originally announced August 2021.

Comments: 14 pages, 10 figures

Application of artificial intelligence techniques for automated detection of myocardial infarction: A review

Authors: Javad Hassannataj Joloudari, Sanaz Mojrian, Issa Nodehi, Amir Mashmool, Zeynab Kiani Zadegan, Sahar Khanjani Shirkharkolaie, Roohallah Alizadehsani, Tahereh Tamadon, Samiyeh Khosravi, Mitra Akbari Kohnehshari, Edris Hassannatajjeloudari, Danial Sharifrazi, Amir Mosavi, Hui Wen Loh, Ru-San Tan, U Rajendra Acharya

Abstract: Myocardial infarction (MI) results in heart muscle injury due to receiving insufficient blood flow. MI is the most common cause of mortality in middle-aged and elderly individuals around the world. To diagnose MI, clinicians need to interpret electrocardiography (ECG) signals, which requires expertise and is subject to observer bias. Artificial intelligence-based methods can be utilized to screen… ▽ More Myocardial infarction (MI) results in heart muscle injury due to receiving insufficient blood flow. MI is the most common cause of mortality in middle-aged and elderly individuals around the world. To diagnose MI, clinicians need to interpret electrocardiography (ECG) signals, which requires expertise and is subject to observer bias. Artificial intelligence-based methods can be utilized to screen for or diagnose MI automatically using ECG signals. In this work, we conducted a comprehensive assessment of artificial intelligence-based approaches for MI detection based on ECG as well as other biophysical signals, including machine learning (ML) and deep learning (DL) models. The performance of traditional ML methods relies on handcrafted features and manual selection of ECG signals, whereas DL models can automate these tasks. The review observed that deep convolutional neural networks (DCNNs) yielded excellent classification performance for MI diagnosis, which explains why they have become prevalent in recent years. To our knowledge, this is the first comprehensive survey of artificial intelligence techniques employed for MI diagnosis using ECG and other biophysical signals. △ Less

Submitted 21 February, 2022; v1 submitted 5 July, 2021; originally announced July 2021.

Comments: 16 pages, 8 figures

Time series forecasting of new cases and new deaths rate for COVID-19 using deep learning methods

Authors: Nooshin Ayoobi, Danial Sharifrazi, Roohallah Alizadehsani, Afshin Shoeibi, Juan M. Gorriz, Hossein Moosaei, Abbas Khosravi, Saeid Nahavandi, Abdoulmohammad Gholamzadeh Chofreh, Feybi Ariani Goni, Jiri Jaromir Klemes, Amir Mosavi

Abstract: The first known case of Coronavirus disease 2019 (COVID-19) was identified in December 2019. It has spread worldwide, leading to an ongoing pandemic, imposed restrictions and costs to many countries. Predicting the number of new cases and deaths during this period can be a useful step in predicting the costs and facilities required in the future. The purpose of this study is to predict new cases a… ▽ More The first known case of Coronavirus disease 2019 (COVID-19) was identified in December 2019. It has spread worldwide, leading to an ongoing pandemic, imposed restrictions and costs to many countries. Predicting the number of new cases and deaths during this period can be a useful step in predicting the costs and facilities required in the future. The purpose of this study is to predict new cases and deaths rate one, three and seven-day ahead during the next 100 days. The motivation for predicting every n days (instead of just every day) is the investigation of the possibility of computational cost reduction and still achieving reasonable performance. Such a scenario may be encountered in real-time forecasting of time series. Six different deep learning methods are examined on the data adopted from the WHO website. Three methods are LSTM, Convolutional LSTM, and GRU. The bidirectional extension is then considered for each method to forecast the rate of new cases and new deaths in Australia and Iran countries. This study is novel as it carries out a comprehensive evaluation of the aforementioned three deep learning methods and their bidirectional extensions to perform prediction on COVID-19 new cases and new death rate time series. To the best of our knowledge, this is the first time that Bi-GRU and Bi-Conv-LSTM models are used for prediction on COVID-19 new cases and new deaths time series. The evaluation of the methods is presented in the form of graphs and Friedman statistical test. The results show that the bidirectional models have lower errors than other models. A several error evaluation metrics are presented to compare all models, and finally, the superiority of bidirectional methods is determined. This research could be useful for organisations working against COVID-19 and determining their long-term plans. △ Less

Submitted 24 December, 2021; v1 submitted 28 April, 2021; originally announced April 2021.

Journal ref: Results in Physics,Volume 27,2021,104495

Analyzing Uniaxial Compressive Strength of Concrete Using a Novel Satin Bowerbird Optimizer

Authors: Hossein Moayedi, Amir Mosavi

Abstract: Surmounting the complexities in analyzing the mechanical parameters of concrete entails selecting an appropriate methodology. This study integrates an artificial neural network (ANN) with a novel metaheuristic technique, namely satin bowerbird optimizer (SBO) for predicting uniaxial compressive strength (UCS) of concrete. For this purpose, the created hybrid is trained and tested using a relativel… ▽ More Surmounting the complexities in analyzing the mechanical parameters of concrete entails selecting an appropriate methodology. This study integrates an artificial neural network (ANN) with a novel metaheuristic technique, namely satin bowerbird optimizer (SBO) for predicting uniaxial compressive strength (UCS) of concrete. For this purpose, the created hybrid is trained and tested using a relatively large dataset collected from the published literature. Three other new algorithms, namely Henry gas solubility optimization (HGSO), sunflower optimization (SFO), and vortex search algorithm (VSA) are also used as benchmarks. After attaining a proper population size for all algorithms, Utilizing various accuracy indicators, it was shown that the proposed ANN-SBO not only can excellently analyze the UCS behavior, but also outperforms all three benchmark hybrids (i.e., ANN-HGSO, ANN-SFO, and ANN-VSA). In the prediction phase, the correlation indices of 0.87394, 0.87936, 0.95329, and 0.95663, as well as mean absolute percentage errors of 15.9719, 15.3845, 9.4970, and 8.0629%, calculated for the ANN-HGSO, ANN-SFO, ANN-VSA, and ANN-SBO, respectively, manifested the best prediction performance for the proposed model. Also, the ANN-VSA achieved reliable results as well. In short, the ANN-SBO can be used by engineers as an efficient non-destructive method for predicting the UCS of concrete. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Comments: 16 pages, 4 figures

MSC Class: 68T05

Machine Learning versus Mathematical Model to Estimate the Transverse Shear Stress Distribution in a Rectangular Channel

Authors: Babak Lashkar-Ara, Niloofar Kalantari, Zohreh Sheikh Khozani, Amir Mosavi

Abstract: One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel. To evaluate the resul… ▽ More One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel. To evaluate the results of the Tsallis entropy, GP and ANFIS models, laboratory observations were used in which shear stress was measured using an optimized Preston tube. This is then used to measure the SSD in various aspect ratios in the rectangular channel. To investigate the shear stress percentage, 10 data series with a total of 112 different data were used. The results of the sensitivity analysis show that the most influential parameter for the SSD in a smooth rectangular channel is the dimensionless parameter B/H, Where the transverse coordinate is B, and the flow depth is H. With the parameters (b/B), (B/H) for the bed and (z/H), (B/H) for the wall as inputs, the modeling of the GP was better than the other one. Based on the analysis, it can be concluded that the use of GP and ANFIS algorithms is more effective in estimating shear stress in smooth rectangular channels than the Tsallis entropy-based equations. △ Less

Submitted 6 March, 2021; originally announced March 2021.

Comments: 16 pages, 8 figures

MSC Class: 68T07

Synthesizing multi-layer perceptron network with ant lion, biogeography-based dragonfly algorithm evolutionary strategy invasive weed and league champion optimization hybrid algorithms in predicting heating load in residential buildings

Authors: Hossein Moayedi, Amir Mosavi

Abstract: The significance of heating load (HL) accurate approximation is the primary motivation of this research to distinguish the most efficient predictive model among several neural-metaheuristic models. The proposed models are through synthesizing multi-layer perceptron network (MLP) with ant lion optimization (ALO), biogeography-based optimization (BBO), dragonfly algorithm (DA), evolutionary strategy… ▽ More The significance of heating load (HL) accurate approximation is the primary motivation of this research to distinguish the most efficient predictive model among several neural-metaheuristic models. The proposed models are through synthesizing multi-layer perceptron network (MLP) with ant lion optimization (ALO), biogeography-based optimization (BBO), dragonfly algorithm (DA), evolutionary strategy (ES), invasive weed optimization (IWO), and league champion optimization (LCA) hybrid algorithms. Each ensemble is optimized in terms of the operating population. Accordingly, the ALO-MLP, BBO-MLP, DA-MLP, ES-MLP, IWO-MLP, and LCA-MLP presented their best performance for population sizes of 350, 400, 200, 500, 50, and 300, respectively. The comparison was carried out by implementing a ranking system. Based on the obtained overall scores (OSs), the BBO (OS = 36) featured as the most capable optimization technique, followed by ALO (OS = 27) and ES (OS = 20). Due to the efficient performance of these algorithms, the corresponding MLPs can be promising substitutes for traditional methods used for HL analysis. △ Less

Submitted 13 February, 2021; originally announced February 2021.

Comments: 24 pages, 7 figures

MSC Class: 68T01

Hybrid Artificial Intelligence Methods for Predicting Air Demand in Dam Bottom Outlet

Authors: Aliakbar Narimani, Mahdi Moghimi, Amir Mosavi

Abstract: In large infrastructures such as dams, which have a relatively high economic value, ensuring the proper operation of the associated hydraulic facilities in different operating conditions is of utmost importance. To ensure the correct and successful operation of the dam's hydraulic equipment and prevent possible damages, including gates and downstream tunnel, to build laboratory models and perform… ▽ More In large infrastructures such as dams, which have a relatively high economic value, ensuring the proper operation of the associated hydraulic facilities in different operating conditions is of utmost importance. To ensure the correct and successful operation of the dam's hydraulic equipment and prevent possible damages, including gates and downstream tunnel, to build laboratory models and perform some tests are essential (the advancement of the smart sensors based on artificial intelligence is essential). One of the causes of damage to dam bottom outlets is cavitation in downstream and between the gates, which can impact on dam facilities, and air aeration can be a solution to improve it. In the present study, six dams in different provinces in Iran has been chosen to evaluate the air entrainment in the downstream tunnel experimentally. Three artificial neural networks (ANN) based machine learning (ML) algorithms are used to model and predict the air aeration in the bottom outlet. The proposed models are trained with genetic algorithms (GA), particle swarm optimization (PSO), i.e., ANN-GA, ANN-PSO, and ANFIS-PSO. Two hydrodynamic variables, namely volume rate and opening percentage of the gate, are used as inputs into all bottom outlet models. The results showed that the most optimal model is ANFIS-PSO to predict the dependent value compared with ANN-GA and ANN-PSO. The importance of the volume rate and opening percentage of the dams' gate parameters is more effective for suitable air aeration. △ Less

Submitted 13 February, 2021; originally announced February 2021.

Comments: 14 pages, 10 figures

MSC Class: 68T07

Machine Learning Information Fusion in Earth Observation: A Comprehensive Review of Methods, Applications and Data Sources

Authors: S. Salcedo-Sanz, P. Ghamisi, M. Piles, M. Werner, L. Cuadra, A. Moreno-Martínez, E. Izquierdo-Verdiguier, J. Muñoz-Marí, Amirhosein Mosavi, G. Camps-Valls

Abstract: This paper reviews the most important information fusion data-driven algorithms based on Machine Learning (ML) techniques for problems in Earth observation. Nowadays we observe and model the Earth with a wealth of observations, from a plethora of different sensors, measuring states, fluxes, processes and variables, at unprecedented spatial and temporal resolutions. Earth observation is well equipp… ▽ More This paper reviews the most important information fusion data-driven algorithms based on Machine Learning (ML) techniques for problems in Earth observation. Nowadays we observe and model the Earth with a wealth of observations, from a plethora of different sensors, measuring states, fluxes, processes and variables, at unprecedented spatial and temporal resolutions. Earth observation is well equipped with remote sensing systems, mounted on satellites and airborne platforms, but it also involves in-situ observations, numerical models and social media data streams, among other data sources. Data-driven approaches, and ML techniques in particular, are the natural choice to extract significant information from this data deluge. This paper produces a thorough review of the latest work on information fusion for Earth observation, with a practical intention, not only focusing on describing the most relevant previous works in the field, but also the most important Earth observation applications where ML information fusion has obtained significant results. We also review some of the most currently used data sets, models and sources for Earth observation problems, describing their importance and how to obtain the data when needed. Finally, we illustrate the application of ML data fusion with a representative set of case studies, as well as we discuss and outlook the near future of the field. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Journal ref: Information Fusion, Volume 63, November 2020, Pages 256-272

Early detection of the advanced persistent threat attack using performance analysis of deep learning

Authors: Javad Hassannataj Joloudari, Mojtaba Haderbadi, Amir Mashmool, Mohammad GhasemiGol, Shahab S., Amir Mosavi

Abstract: One of the most common and important destructive attacks on the victim system is Advanced Persistent Threat (APT)-attack. The APT attacker can achieve his hostile goals by obtaining information and gaining financial benefits regarding the infrastructure of a network. One of the solutions to detect a secret APT attack is using network traffic. Due to the nature of the APT attack in terms of being o… ▽ More One of the most common and important destructive attacks on the victim system is Advanced Persistent Threat (APT)-attack. The APT attacker can achieve his hostile goals by obtaining information and gaining financial benefits regarding the infrastructure of a network. One of the solutions to detect a secret APT attack is using network traffic. Due to the nature of the APT attack in terms of being on the network for a long time and the fact that the network may crash because of high traffic, it is difficult to detect this type of attack. Hence, in this study, machine learning methods such as C5.0 decision tree, Bayesian network and deep neural network are used for timely detection and classification of APT-attacks on the NSL-KDD dataset. Moreover, 10-fold cross validation method is used to experiment these models. As a result, the accuracy (ACC) of the C5.0 decision tree, Bayesian network and 6-layer deep learning models is obtained as 95.64%, 88.37% and 98.85%, respectively, and also, in terms of the important criterion of the false positive rate (FPR), the FPR value for the C5.0 decision tree, Bayesian network and 6-layer deep learning models is obtained as 2.56, 10.47 and 1.13, respectively. Other criterions such as sensitivity, specificity, accuracy, false negative rate and F-measure are also investigated for the models, and the experimental results show that the deep learning model with automatic multi-layered extraction of features has the best performance for timely detection of an APT-attack comparing to other classification models. △ Less

Submitted 19 September, 2020; originally announced September 2020.

Comments: 38 pages, 15 figures, 5 tables

Adaptive Neuro-Fuzzy Inference System and a Multilayer Perceptron Model Trained with Grey Wolf Optimizer for Predicting Solar Diffuse Fraction

Authors: Randall Claywell, Laszlo Nadai, Felde Imre, Amir Mosavi

Abstract: The accurate prediction of the solar Diffuse Fraction (DF), sometimes called the Diffuse Ratio, is an important topic for solar energy research. In the present study, the current state of Diffuse Irradiance research is discussed and then three robust, Machine Learning (ML) models, are examined using a large dataset (almost 8 years) of hourly readings from Almeria, Spain. The ML models used herein,… ▽ More The accurate prediction of the solar Diffuse Fraction (DF), sometimes called the Diffuse Ratio, is an important topic for solar energy research. In the present study, the current state of Diffuse Irradiance research is discussed and then three robust, Machine Learning (ML) models, are examined using a large dataset (almost 8 years) of hourly readings from Almeria, Spain. The ML models used herein, are a hybrid Adaptive Network-based Fuzzy Inference System (ANFIS), a single Multi-Layer Perceptron (MLP) and a hybrid Multi-Layer Perceptron-Grey Wolf Optimizer (MLP-GWO). These models were evaluated for their predictive precision, using various Solar and Diffuse Fraction (DF) irradiance data, from Spain. The results were then evaluated using two frequently used evaluation criteria, the Mean Absolute Error (MAE) and the Root Mean Square Error (RMSE). The results showed that the MLP-GWO model, followed by the ANFIS model, provided a higher performance, in both the training and the testing procedures. △ Less

Submitted 13 September, 2020; originally announced September 2020.

Comments: 13 pages, 6 figures

MSC Class: 68T01

Extreme learning machine-based model for Solubility estimation of hydrocarbon gases in electrolyte solutions

Authors: Narjes Nabipour, Amir Mosavi, Alireza Baghban, Shahaboddin Shamshirband, Imre Felde

Abstract: Calculating hydrocarbon components solubility of natural gases is known as one of the important issues for operational works in petroleum and chemical engineering. In this work, a novel solubility estimation tool has been proposed for hydrocarbon gases including methane, ethane, propane, and butane in aqueous electrolyte solutions based on extreme learning machine (ELM) algorithm. Comparing the EL… ▽ More Calculating hydrocarbon components solubility of natural gases is known as one of the important issues for operational works in petroleum and chemical engineering. In this work, a novel solubility estimation tool has been proposed for hydrocarbon gases including methane, ethane, propane, and butane in aqueous electrolyte solutions based on extreme learning machine (ELM) algorithm. Comparing the ELM outputs with a comprehensive real databank which has 1175 solubility points concluded to R-squared values of 0.985 and 0.987 for training and testing phases respectively. Furthermore, the visual comparison of estimated and actual hydrocarbon solubility led to confirm the ability of the proposed solubility model. Additionally, sensitivity analysis has been employed on the input variables of the model to identify their impacts on hydrocarbon solubility. Such a comprehensive and reliable study can help engineers and scientists to successfully determine the important thermodynamic properties which are key factors in optimizing and designing different industrial units such as refineries and petrochemical plants. △ Less

Submitted 31 December, 2019; originally announced September 2020.

Comments: 17 pages, 8 figures

MSC Class: 68Q05

Metaheuristics for the operating theater planning and scheduling: A systematic review

Authors: Amirhossein Moosavi, Onur Ozturk

Abstract: There are found a vast number of papers studying the problem of operating theater planning and scheduling. Different variants of this problem are generally recognized to be NP-complete; thus, several solution approaches have been utilized in the literature to confront with these complicated problems. The lack of a thorough review of the main characteristics of solution approaches is tangible in th… ▽ More There are found a vast number of papers studying the problem of operating theater planning and scheduling. Different variants of this problem are generally recognized to be NP-complete; thus, several solution approaches have been utilized in the literature to confront with these complicated problems. The lack of a thorough review of the main characteristics of solution approaches is tangible in the literature (reviewing them separately and with regards to the characteristics of studied problems), which can provide pragmatic guidelines for practitioners and future research projects. This paper aims to address this issue. Since different types of solution approaches usually have different characteristics, this paper focuses only on metaheuristic algorithms. Through both automatic and manual search methods, we have selected and reviewed 28 papers with respect to their main problem and solution approach features. Finally, some directions are introduced for future research. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Comments: 30 pages, 8 figures and 4 tables

MSC Class: A.1; I.6

Generation expansion planning in the presence of wind power plants using a genetic algorithm model

Authors: Ali Sahragard, Hamid Falaghi, Mahdi Farhadi, Amir Mosavi, Abouzar Estebsari

Abstract: One of the essential aspects of power system planning is generation expansion planning (GEP). The purpose of GEP is to enhance construction planning and reduce the costs of installing different types of power plants. This paper proposes a method based on Genetic Algorithm (GA) for GEP in the presence of wind power plants. Since it is desired to integrate the maximum possible wind power production… ▽ More One of the essential aspects of power system planning is generation expansion planning (GEP). The purpose of GEP is to enhance construction planning and reduce the costs of installing different types of power plants. This paper proposes a method based on Genetic Algorithm (GA) for GEP in the presence of wind power plants. Since it is desired to integrate the maximum possible wind power production in GEP, the constraints for incorporating different levels of wind energy in power generation are investigated comprehensively. This will allow obtaining the maximum reasonable amount of wind penetration in the network. Besides, due to the existence of different wind regimes, the penetration of strong and weak wind on GEP is assessed. The results show that the maximum utilization of wind power generation capacity could increase the exploitation of more robust wind regimes. Considering the growth of the wind farm industry and the cost reduction for building wind power plants, the sensitivity of GEP to the variations of this cost is investigated. The results further indicate that for a 10% reduction in the initial investment cost of wind power plants, the proposed model estimates that the overall cost will be minimized. △ Less

Submitted 7 July, 2020; originally announced August 2020.

Comments: 23 pages, 10 figures

MSC Class: 68T01

Predicting and Map** of Soil Organic Carbon Using Machine Learning Algorithms in Northern Iran

Authors: Mostafa Emadi, Ruhollah Taghizadeh-Mehrjardi, Ali Cherati, Majid Danesh, Amir Mosavi, Thomas Scholten

Abstract: Estimation of the soil organic carbon content is of utmost importance in understanding the chemical, physical, and biological functions of the soil. This study proposes machine learning algorithms of support vector machines, artificial neural networks, regression tree, random forest, extreme gradient boosting, and conventional deep neural network for advancing prediction models of SOC. Models are… ▽ More Estimation of the soil organic carbon content is of utmost importance in understanding the chemical, physical, and biological functions of the soil. This study proposes machine learning algorithms of support vector machines, artificial neural networks, regression tree, random forest, extreme gradient boosting, and conventional deep neural network for advancing prediction models of SOC. Models are trained with 1879 composite surface soil samples, and 105 auxiliary data as predictors. The genetic algorithm is used as a feature selection approach to identify effective variables. The results indicate that precipitation is the most important predictor driving 15 percent of SOC spatial variability followed by the normalized difference vegetation index, day temperature index of moderate resolution imaging spectroradiometer, multiresolution valley bottom flatness and land use, respectively. Based on 10 fold cross validation, the DNN model reported as a superior algorithm with the lowest prediction error and uncertainty. In terms of accuracy, DNN yielded a mean absolute error of 59 percent, a root mean squared error of 75 percent, a coefficient of determination of 0.65, and Lins concordance correlation coefficient of 0.83. The SOC content was the highest in udic soil moisture regime class with mean values of 4 percent, followed by the aquic and xeric classes, respectively. Soils in dense forestlands had the highest SOC contents, whereas soils of younger geological age and alluvial fans had lower SOC. The proposed DNN is a promising algorithm for handling large numbers of auxiliary data at a province scale, and due to its flexible structure and the ability to extract more information from the auxiliary data surrounding the sampled observations, it had high accuracy for the prediction of the SOC baseline map and minimal uncertainty. △ Less

Submitted 12 July, 2020; originally announced July 2020.

Comments: 30pages, 9 figures

MSC Class: 68T05

Journal ref: Remote Sens. 2020, 12, 2234

Modeling and Uncertainty Analysis of Groundwater Level Using Six Evolutionary Optimization Algorithms Hybridized with ANFIS, SVM, and ANN

Authors: Akram Seifi, Mohammad Ehteram, Vijay P. Singh, Amir Mosavi

Abstract: In the present study, six meta-heuristic schemes are hybridized with artificial neural network (ANN), adaptive neuro-fuzzy interface system (ANFIS), and support vector machine (SVM), to predict monthly groundwater level (GWL), evaluate uncertainty analysis of predictions and spatial variation analysis. The six schemes, including grasshopper optimization algorithm (GOA), cat swarm optimization (CSO… ▽ More In the present study, six meta-heuristic schemes are hybridized with artificial neural network (ANN), adaptive neuro-fuzzy interface system (ANFIS), and support vector machine (SVM), to predict monthly groundwater level (GWL), evaluate uncertainty analysis of predictions and spatial variation analysis. The six schemes, including grasshopper optimization algorithm (GOA), cat swarm optimization (CSO), weed algorithm (WA), genetic algorithm (GA), krill algorithm (KA), and particle swarm optimization (PSO), were used to hybridize for improving the performance of ANN, SVM, and ANFIS models. Groundwater level (GWL) data of Ardebil plain (Iran) for a period of 144 months were selected to evaluate the hybrid models. The pre-processing technique of principal component analysis (PCA) was applied to reduce input combinations from monthly time series up to 12-month prediction intervals. The results showed that the ANFIS-GOA was superior to the other hybrid models for predicting GWL in the first piezometer and third piezometer in the testing stage. The performance of hybrid models with optimization algorithms was far better than that of classical ANN, ANFIS, and SVM models without hybridization. The percent of improvements in the ANFIS-GOA versus standalone ANFIS in piezometer 10 were 14.4%, 3%, 17.8%, and 181% for RMSE, MAE, NSE, and PBIAS in the training stage and 40.7%, 55%, 25%, and 132% in testing stage, respectively. The improvements for piezometer 6 in train step were 15%, 4%, 13%, and 208% and in the test step were 33%, 44.6%, 16.3%, and 173%, respectively, that clearly confirm the superiority of developed hybridization schemes in GWL modeling. Uncertainty analysis showed that ANFIS-GOA and SVM had, respectively, the best and worst performances among other models. In general, GOA enhanced the accuracy of the ANFIS, ANN, and SVM models. △ Less

Submitted 28 June, 2020; originally announced June 2020.

Comments: 42 pages, 11 figures

MSC Class: 68T07

Journal ref: Sustainability 2020, 12, 4023

Hybrid Machine Learning Models for Crop Yield Prediction

Authors: Saeed Nosratabadi, Felde Imre, Karoly Szell, Sina Ardabili, Bertalan Beszedes, Amir Mosavi

Abstract: Prediction of crop yield is essential for food security policymaking, planning, and trade. The objective of the current study is to propose novel crop yield prediction models based on hybrid machine learning methods. In this study, the performance of the artificial neural networks-imperialist competitive algorithm (ANN-ICA) and artificial neural networks-gray wolf optimizer (ANN-GWO) models for th… ▽ More Prediction of crop yield is essential for food security policymaking, planning, and trade. The objective of the current study is to propose novel crop yield prediction models based on hybrid machine learning methods. In this study, the performance of the artificial neural networks-imperialist competitive algorithm (ANN-ICA) and artificial neural networks-gray wolf optimizer (ANN-GWO) models for the crop yield prediction are evaluated. According to the results, ANN-GWO, with R of 0.48, RMSE of 3.19, and MEA of 26.65, proved a better performance in the crop yield prediction compared to the ANN-ICA model. The results can be used by either practitioners, researchers or policymakers for food security. △ Less

Submitted 8 March, 2020; originally announced May 2020.

Comments: 5 pages, 2 figures, 3 tables

MSC Class: 68T05

A Mobile Cloud-Based eHealth Scheme

Authors: Yihe Liu, Aaqif Afzaal Abbasi, Atefeh Aghaei, Almas Abbasi, Amir Mosavi, Shahab Shamshirband, Mohammed A. A. Al-qaness

Abstract: Mobile cloud computing is an emerging field that is gaining popularity across borders at a rapid pace. Similarly, the field of health informatics is also considered as an extremely important field. This work observes the collaboration between these two fields to solve the traditional problem of extracting Electrocardiogram signals from trace reports and then performing analysis. The developed syst… ▽ More Mobile cloud computing is an emerging field that is gaining popularity across borders at a rapid pace. Similarly, the field of health informatics is also considered as an extremely important field. This work observes the collaboration between these two fields to solve the traditional problem of extracting Electrocardiogram signals from trace reports and then performing analysis. The developed system has two front ends, the first dedicated for the user to perform the photographing of the trace report. Once the photographing is complete, mobile computing is used to extract the signal. Once the signal is extracted, it is uploaded into the server and further analysis is performed on the signal in the cloud. Once this is done, the second interface, intended for the use of the physician, can download and view the trace from the cloud. The data is securely held using a password-based authentication method. The system presented here is one of the first attempts at delivering the total solution, and after further upgrades, it will be possible to deploy the system in a commercial setting. △ Less

Submitted 15 April, 2020; originally announced April 2020.

Comments: 9 pages, 3 figures

MSC Class: 68T05

Dynamic Modeling and Adaptive Controlling in GPS-Intelligent Buoy (GIB) Systems Based on Neural-Fuzzy Networks

Authors: Dangquan Zhang, Muhammad Aqeel Ashraf, Zhenling Liu, Wan-Xi Peng, Mohammad Javad Golkar, Amir Mosavi

Abstract: Recently, various relations and criteria have been presented to establish a proper relationship between control systems and control the Global Positioning System (GPS)-intelligent buoy system. Given the importance of controlling the position of buoys and the construction of intelligent systems, in this paper, dynamic system modeling is applied to position marine buoys through the improved neural n… ▽ More Recently, various relations and criteria have been presented to establish a proper relationship between control systems and control the Global Positioning System (GPS)-intelligent buoy system. Given the importance of controlling the position of buoys and the construction of intelligent systems, in this paper, dynamic system modeling is applied to position marine buoys through the improved neural network with a backstep** technique. This study aims at develo** a novel controller based on an adaptive fuzzy neural network to optimally track the dynamically positioned vehicle on the water with unavailable velocities and unidentified control parameters. In order to model the network with the proposed technique, uncertainties and the unwanted disturbances are studied in the neural network. The presented study aims at develo** a neural controlling which applies the vectorial back-step** technique to the surface ships, which have been dynamically positioned with undetermined disturbances and ambivalences. Moreover, the objective function is to minimize the output error for the neural network (NN) based on the closed-loop system. The most important feature of the proposed model for the positioning buoys is its independence from comparative knowledge or information on the dynamics and the unwanted disturbances of ships. The numerical and obtained consequences demonstrate that the control system can adjust the routes and the position of the buoys to the desired objective with relatively few position errors. △ Less

Submitted 3 April, 2020; originally announced April 2020.

Comments: 32 pages, 10 figures

MSC Class: 68T01

Comprehensive Review of Deep Reinforcement Learning Methods and Applications in Economics

Authors: Amir Mosavi, Pedram Ghamisi, Yaser Faghan, Puhong Duan

Abstract: The popularity of deep reinforcement learning (DRL) methods in economics have been exponentially increased. DRL through a wide range of capabilities from reinforcement learning (RL) and deep learning (DL) for handling sophisticated dynamic business environments offers vast opportunities. DRL is characterized by scalability with the potential to be applied to high-dimensional problems in conjunctio… ▽ More The popularity of deep reinforcement learning (DRL) methods in economics have been exponentially increased. DRL through a wide range of capabilities from reinforcement learning (RL) and deep learning (DL) for handling sophisticated dynamic business environments offers vast opportunities. DRL is characterized by scalability with the potential to be applied to high-dimensional problems in conjunction with noisy and nonlinear patterns of economic data. In this work, we first consider a brief review of DL, RL, and deep RL methods in diverse applications in economics providing an in-depth insight into the state of the art. Furthermore, the architecture of DRL applied to economic applications is investigated in order to highlight the complexity, robustness, accuracy, performance, computational tasks, risk constraints, and profitability. The survey results indicate that DRL can provide better performance and higher accuracy as compared to the traditional algorithms while facing real economic problems at the presence of risk parameters and the ever-increasing uncertainties. △ Less

Submitted 21 March, 2020; originally announced April 2020.

Comments: 42 pages, 26 figures

MSC Class: 68T05

Deep learning for Stock Market Prediction

Authors: Mojtaba Nabipour, Pooyan Nayyeri, Hamed Jabani, Amir Mosavi

Abstract: Prediction of stock groups' values has always been attractive and challenging for shareholders. This paper concentrates on the future prediction of stock market groups. Four groups named diversified financials, petroleum, non-metallic minerals and basic metals from Tehran stock exchange are chosen for experimental evaluations. Data are collected for the groups based on ten years of historical reco… ▽ More Prediction of stock groups' values has always been attractive and challenging for shareholders. This paper concentrates on the future prediction of stock market groups. Four groups named diversified financials, petroleum, non-metallic minerals and basic metals from Tehran stock exchange are chosen for experimental evaluations. Data are collected for the groups based on ten years of historical records. The values predictions are created for 1, 2, 5, 10, 15, 20 and 30 days in advance. The machine learning algorithms utilized for prediction of future values of stock market groups. We employed Decision Tree, Bagging, Random Forest, Adaptive Boosting (Adaboost), Gradient Boosting and eXtreme Gradient Boosting (XGBoost), and Artificial neural network (ANN), Recurrent Neural Network (RNN) and Long short-term memory (LSTM). Ten technical indicators are selected as the inputs into each of the prediction models. Finally, the result of predictions is presented for each technique based on three metrics. Among all the algorithms used in this paper, LSTM shows more accurate results with the highest model fitting ability. Also, for tree-based models, there is often an intense competition between Adaboost, Gradient Boosting, and XGBoost. △ Less

Submitted 31 March, 2020; originally announced April 2020.

Comments: 25 pages, 35 tables, 6 figures

MSC Class: 68T05

Novel Meta-Heuristic Model for Discrimination between Iron Deficiency Anemia and B-Thalassemia with CBC Indices Based on Dynamic Harmony Search

Authors: Sultan Noman Qasem, Amir Mosavi

Abstract: In recent decades, attention has been directed at anemia classification for various medical purposes, such as thalassemia screening and predicting iron deficiency anemia (IDA). In this study, a new method has been successfully tested for discrimination between IDA and \b{eta}-thalassemia trait (\b{eta}-TT). The method is based on a Dynamic Harmony Search (DHS). Complete blood count (CBC), a fast a… ▽ More In recent decades, attention has been directed at anemia classification for various medical purposes, such as thalassemia screening and predicting iron deficiency anemia (IDA). In this study, a new method has been successfully tested for discrimination between IDA and \b{eta}-thalassemia trait (\b{eta}-TT). The method is based on a Dynamic Harmony Search (DHS). Complete blood count (CBC), a fast and inexpensive laboratory test, is used as the input of the system. Other models, such as a genetic programming method called structured representation on genetic algorithm in non-linear function fitting (STROGANOFF), an artificial neural network (ANN), an adaptive neuro-fuzzy inference system (ANFIS), a support vector machine (SVM), k-nearest neighbor (KNN), and certain traditional methods, are compared with the proposed method. △ Less

Submitted 3 March, 2020; originally announced April 2020.

Comments: 10pages, 5 figures, 7 tables

MSC Class: 68T05

Data Science in Economics

Authors: Saeed Nosratabadi, Amir Mosavi, Puhong Duan, Pedram Ghamisi

Abstract: This paper provides the state of the art of data science in economics. Through a novel taxonomy of applications and methods advances in data science are investigated. The data science advances are investigated in three individual classes of deep learning models, ensemble models, and hybrid models. Application domains include stock market, marketing, E-commerce, corporate banking, and cryptocurrenc… ▽ More This paper provides the state of the art of data science in economics. Through a novel taxonomy of applications and methods advances in data science are investigated. The data science advances are investigated in three individual classes of deep learning models, ensemble models, and hybrid models. Application domains include stock market, marketing, E-commerce, corporate banking, and cryptocurrency. Prisma method, a systematic literature review methodology is used to ensure the quality of the survey. The findings revealed that the trends are on advancement of hybrid models as more than 51% of the reviewed articles applied hybrid model. On the other hand, it is found that based on the RMSE accuracy metric, hybrid models had higher prediction accuracy than other algorithms. While it is expected the trends go toward the advancements of deep learning models. △ Less

Submitted 18 March, 2020; originally announced March 2020.

Comments: 22pages, 4 figures, 9 tables

MSC Class: 68T05

Comparative analysis of machine learning models for Ammonia Capture of Ionic Liquids

Authors: Shahaboddin Shamshirband, Narjes Nabipour, Masoud Hadipoor, Alireza Baghban, Amir Mosavi

Abstract: Industry uses various solvents in the processes of refrigeration and ventilation. Among them, the Ionic liquids (ILs) as the relatively new solvents, are known for their proven eco-friendly characteristics. In this research, a comprehensive literature review was carried out to deliver an insight into the ILs and the prediction models used for estimating the ammonia solubility in ILs. Furthermore,… ▽ More Industry uses various solvents in the processes of refrigeration and ventilation. Among them, the Ionic liquids (ILs) as the relatively new solvents, are known for their proven eco-friendly characteristics. In this research, a comprehensive literature review was carried out to deliver an insight into the ILs and the prediction models used for estimating the ammonia solubility in ILs. Furthermore, a number of advanced machine learning methods, i.e. multilayer perceptron (MLP) and a combination of particle swarm optimization (PSO) and adaptive neuro-fuzzy inference system (ANFIS) models are used to estimate the solubility of ammonia in various ionic liquids. Affecting parameters were molecular weight, critical temperature and pressure of ILs. Furthermore, the salability is also predicted using the two-equation of states. Down the line, some comparisons were drawn between experimental and modeling results which is rarely done. The study shows that the equations of states are not able estimate the solubility of ammonia accurately, by contrast, artificial intelligence methods have produced promising results. △ Less

Submitted 19 February, 2020; originally announced March 2020.

Comments: 44 pages, 12 figures

MSC Class: 68T07

Resource-Aware Network Topology Management Framework

Authors: Aaqif Afzaal Abbasi, Shahab Shamshirband, Mohammed A. A. Al-qaness, Almas Abbasi, Nashat T. AL-Jallad, Amir Mosavi

Abstract: Cloud infrastructure provides computing services where computing resources can be adjusted on-demand. However, the adoption of cloud infrastructures brings concerns like reliance on the service provider network, reliability, compliance for service level agreements. Software-defined networking (SDN) is a networking concept that suggests the segregation of a network data plane from the control plane… ▽ More Cloud infrastructure provides computing services where computing resources can be adjusted on-demand. However, the adoption of cloud infrastructures brings concerns like reliance on the service provider network, reliability, compliance for service level agreements. Software-defined networking (SDN) is a networking concept that suggests the segregation of a network data plane from the control plane. This concept improves networking behavior. In this paper, we present an SDN-enabled resource-aware topology framework. The proposed framework employs SLA compliance, Path Computation Element (PCE) and shares fair loading to achieve better topology features. We also present an evaluation, showcasing the potential of our framework. △ Less

Submitted 26 February, 2020; originally announced March 2020.

Comments: 13 pages, 7 figures

MSC Class: 68T05

Comparative Analysis of Single and Hybrid Neuro-Fuzzy-Based Models for an Industrial Heating Ventilation and Air Conditioning Control System

Authors: Sina Ardabili, Bertalan Beszedes, Laszlo Nadai, Karoly Szell, Amir Mosavi, Felde Imre

Abstract: Hybridization of machine learning methods with soft computing techniques is an essential approach to improve the performance of the prediction models. Hybrid machine learning models, particularly, have gained popularity in the advancement of the high-performance control systems. Higher accuracy and better performance for prediction models of exergy destruction and energy consumption used in the co… ▽ More Hybridization of machine learning methods with soft computing techniques is an essential approach to improve the performance of the prediction models. Hybrid machine learning models, particularly, have gained popularity in the advancement of the high-performance control systems. Higher accuracy and better performance for prediction models of exergy destruction and energy consumption used in the control circuit of heating, ventilation, and air conditioning (HVAC) systems can be highly economical in the industrial scale to save energy. This research proposes two hybrid models of adaptive neuro-fuzzy inference system-particle swarm optimization (ANFIS-PSO), and adaptive neuro-fuzzy inference system-genetic algorithm (ANFIS-GA) for HVAC. The results are further compared with the single ANFIS model. The ANFIS-PSO model with the RMSE of 0.0065, MAE of 0.0028, and R2 equal to 0.9999, with a minimum deviation of 0.0691 (KJ/s), outperforms the ANFIS-GA and single ANFIS models. △ Less

Submitted 22 February, 2020; originally announced February 2020.

Comments: 6 pages, 6 figures

MSC Class: 68T05

Performance Analysis of Combine Harvester using Hybrid Model of Artificial Neural Networks Particle Swarm Optimization

Authors: Laszlo Nadai, Felde Imre, Sina Ardabili, Tarahom Mesri Gundoshmian, Pinter Gergo, Amir Mosavi

Abstract: Novel applications of artificial intelligence for tuning the parameters of industrial machines for optimal performance are emerging at a fast pace. Tuning the combine harvesters and improving the machine performance can dramatically minimize the wastes during harvesting, and it is also beneficial to machine maintenance. Literature includes several soft computing, machine learning and optimization… ▽ More Novel applications of artificial intelligence for tuning the parameters of industrial machines for optimal performance are emerging at a fast pace. Tuning the combine harvesters and improving the machine performance can dramatically minimize the wastes during harvesting, and it is also beneficial to machine maintenance. Literature includes several soft computing, machine learning and optimization methods that had been used to model the function of harvesters of various crops. Due to the complexity of the problem, machine learning methods had been recently proposed to predict the optimal performance with promising results. In this paper, through proposing a novel hybrid machine learning model based on artificial neural networks integrated with particle swarm optimization (ANN-PSO), the performance analysis of a common combine harvester is presented. The hybridization of machine learning methods with soft computing techniques has recently shown promising results to improve the performance of the combine harvesters. This research aims at improving the results further by providing more stable models with higher accuracy. △ Less

Submitted 22 February, 2020; originally announced February 2020.

Comments: 6 pages, 6 figures

MSC Class: 68T05

Application of ERA5 and MENA simulations to predict offshore wind energy potential

Authors: Shahab Shamshirband, Amir Mosavi, Narjes Nabipour, Kwok-wing Chau

Abstract: This study explores wind energy resources in different locations through the Gulf of Oman and also their future variability due climate change impacts. In this regard, EC-EARTH near surface wind outputs obtained from CORDEX-MENA simulations are used for historical and future projection of the energy. The ERA5 wind data are employed to assess suitability of the climate model. Moreover, the ERA5 wav… ▽ More This study explores wind energy resources in different locations through the Gulf of Oman and also their future variability due climate change impacts. In this regard, EC-EARTH near surface wind outputs obtained from CORDEX-MENA simulations are used for historical and future projection of the energy. The ERA5 wind data are employed to assess suitability of the climate model. Moreover, the ERA5 wave data over the study area are applied to compute sea surface roughness as an important variable for converting near surface wind speeds to those of wind speed at turbine hub-height. Considering the power distribution, bathymetry and distance from the coats, some spots as tentative energy hotspots to provide detailed assessment of directional and temporal variability and also to investigate climate change impact studies. RCP8.5 as a common climatic scenario is used to project and extract future variation of the energy in the selected sites. The results of this study demonstrate that the selected locations have a suitable potential for wind power turbine plan and constructions. △ Less

Submitted 23 February, 2020; originally announced February 2020.

Comments: 21 pages, 12 figures

MSC Class: 68T05

Wind speed prediction using a hybrid model of the multi-layer perceptron and whale optimization algorithm

Authors: Saeed Samadianfard, Sajjad Hashemi, Katayoun Kargar, Mojtaba Izadyar, Ali Mostafaeipour, Amir Mosavi, Narjes Nabipour, Shahaboddin Shamshirband

Abstract: Wind power as a renewable source of energy, has numerous economic, environmental and social benefits. In order to enhance and control renewable wind power, it is vital to utilize models that predict wind speed with high accuracy. Due to neglecting of requirement and significance of data preprocessing and disregarding the inadequacy of using a single predicting model, many traditional models have p… ▽ More Wind power as a renewable source of energy, has numerous economic, environmental and social benefits. In order to enhance and control renewable wind power, it is vital to utilize models that predict wind speed with high accuracy. Due to neglecting of requirement and significance of data preprocessing and disregarding the inadequacy of using a single predicting model, many traditional models have poor performance in wind speed prediction. In the current study, for predicting wind speed at target stations in the north of Iran, the combination of a multi-layer perceptron model (MLP) with the Whale Optimization Algorithm (WOA) used to build new method (MLP-WOA) with a limited set of data (2004-2014). Then, the MLP-WOA model was utilized at each of the ten target stations, with the nine stations for training and tenth station for testing (namely: Astara, Bandar-E-Anzali, Rasht, Manjil, Jirandeh, Talesh, Kiyashahr, Lahijan, Masuleh, and Deylaman) to increase the accuracy of the subsequent hybrid model. The capability of the hybrid model in wind speed forecasting at each target station was compared with the MLP model without the WOA optimizer. To determine definite results, numerous statistical performances were utilized. For all ten target stations, the MLP-WOA model had precise outcomes than the standalone MLP model. The hybrid model had acceptable performances with lower amounts of the RMSE, SI and RE parameters and higher values of NSE, WI, and KGE parameters. It was concluded that the WOA optimization algorithm can improve the prediction accuracy of MLP model and may be recommended for accurate wind speed prediction. △ Less

Submitted 14 February, 2020; originally announced February 2020.

Comments: 20 pages, 7 figures

MSC Class: 68Q05

Evaluation of electrical efficiency of photovoltaic thermal solar collector

Authors: Mohammad Hossein Ahmadi, Alireza Baghban, Milad Sadeghzadeh, Mohammad Zamen, Amir Mosavi, Shahaboddin Shamshirband, Ravinder Kumar, Mohammad Mohammadi-Khanaposhtani

Abstract: Solar energy is a renewable resource of energy that is broadly utilized and has the least emissions among renewable energies. In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for the thermal performance of a photovoltaic-thermal solar collector (PV/T). In the propose… ▽ More Solar energy is a renewable resource of energy that is broadly utilized and has the least emissions among renewable energies. In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for the thermal performance of a photovoltaic-thermal solar collector (PV/T). In the proposed models, the inlet temperature, flow rate, heat, solar radiation, and the sun heat have been considered as the inputs variables. Data set has been extracted through experimental measurements from a novel solar collector system. Different analyses are performed to examine the credibility of the introduced approaches and evaluate their performance. The proposed LSSVM model outperformed ANFIS and ANNs models. LSSVM model is reported suitable when the laboratory measurements are costly and time-consuming, or achieving such values requires sophisticated interpretations. △ Less

Submitted 11 February, 2020; originally announced February 2020.

Comments: 49 pages, 19 figures

MSC Class: 68Q05

Prediction of Discharge Capacity of Labyrinth Weir with Gene Expression Programming

Authors: Hossein Bonakdari, Isa Ebtehaj, Bahram Gharabaghi, Ali Sharifi, Amir Mosavi

Abstract: This paper proposes a model based on gene expression programming for predicting the discharge coefficient of triangular labyrinth weirs. The parameters influencing discharge coefficient prediction were first examined and presented as crest height ratio to the head over the crest of the weir, a crest length of water to channel width, a crest length of water to the head over the crest of the weir, F… ▽ More This paper proposes a model based on gene expression programming for predicting the discharge coefficient of triangular labyrinth weirs. The parameters influencing discharge coefficient prediction were first examined and presented as crest height ratio to the head over the crest of the weir, a crest length of water to channel width, a crest length of water to the head over the crest of the weir, Froude number and vertex angle dimensionless parameters. Different models were then presented using sensitivity analysis in order to examine each of the dimensionless parameters presented in this study. In addition, an equation was presented through the use of nonlinear regression (NLR) for the purpose of comparison with GEP. The results of the studies conducted by using different statistical indexes indicated that GEP is more capable than NLR. This is to the extent that GEP predicts the discharge coefficient with an average relative error of approximately 2.5% in such a manner that the predicted values have less than 5% relative error in the worst model. △ Less

Submitted 15 January, 2020; originally announced February 2020.

Comments: 16 pages, 6 figures

MSC Class: 68T01

Coronary Artery Disease Diagnosis; Ranking the Significant Features Using Random Trees Model

Authors: Javad Hassannataj Joloudari, Edris Hassannataj Joloudari, Hamid Saadatfar, Mohammad GhasemiGol, Seyyed Mohammad Razavi, Amir Mosavi, Narjes Nabipour, Shahaboddin Shamshirband, Laszlo Nadai

Abstract: Heart disease is one of the most common diseases in middle-aged citizens. Among the vast number of heart diseases, the coronary artery disease (CAD) is considered as a common cardiovascular disease with a high death rate. The most popular tool for diagnosing CAD is the use of medical imaging, e.g., angiography. However, angiography is known for being costly and also associated with a number of sid… ▽ More Heart disease is one of the most common diseases in middle-aged citizens. Among the vast number of heart diseases, the coronary artery disease (CAD) is considered as a common cardiovascular disease with a high death rate. The most popular tool for diagnosing CAD is the use of medical imaging, e.g., angiography. However, angiography is known for being costly and also associated with a number of side effects. Hence, the purpose of this study is to increase the accuracy of coronary heart disease diagnosis through selecting significant predictive features in order of their ranking. In this study, we propose an integrated method using machine learning. The machine learning methods of random trees (RTs), decision tree of C5.0, support vector machine (SVM), decision tree of Chi-squared automatic interaction detection (CHAID) are used in this study. The proposed method shows promising results and the study confirms that RTs model outperforms other models. △ Less

Submitted 16 January, 2020; originally announced January 2020.

Comments: 25 pages, 9 figures

MSC Class: 68T05

Journal ref: International Journal of Environmental Research and Public Health, 2020

Intelligent Road Inspection with Advanced Machine Learning; Hybrid Prediction Models for Smart Mobility and Transportation Maintenance Systems

Authors: Nader Karballaeezadeh, Farah Zaremotekhases, Shahaboddin Shamshirband, Amir Mosavi, Narjes Nabipour, Peter Csiba, Annamaria R. Varkonyi-Koczy

Abstract: Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the pr… ▽ More Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well as their hybrids, i.e., Levenberg-Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE), and standard error (SD). The CMIS model outperforms other models with the promising results of APRE=2.3303, AAPRE=11.6768, RMSE=12.0056, and SD=0.0210. △ Less

Submitted 18 January, 2020; originally announced January 2020.

Comments: 23 pages, 10 figures

MSC Class: 68T01

A Bayesian Monte-Carlo Uncertainty Model for Assessment of Shear Stress Entropy

Authors: Amin Kazemian-Kale-Kale, Azadeh Gholami, Mohammad Rezaie-Balf, Amir Mosavi, Ahmed A Sattar, Bahram Gharabaghi, Hossein Bonakdari

Abstract: The entropy models have been recently adopted in many studies to evaluate the distribution of the shear stress in circular channels. However, the uncertainty in their predictions and their reliability remains an open question. We present a novel method to evaluate the uncertainty of four popular entropy models, including Shannon, Shannon-Power Low (PL), Tsallis, and Renyi, in shear stress estimati… ▽ More The entropy models have been recently adopted in many studies to evaluate the distribution of the shear stress in circular channels. However, the uncertainty in their predictions and their reliability remains an open question. We present a novel method to evaluate the uncertainty of four popular entropy models, including Shannon, Shannon-Power Low (PL), Tsallis, and Renyi, in shear stress estimation in circular channels. The Bayesian Monte-Carlo (BMC) uncertainty method is simplified considering a 95% Confidence Bound (CB). We developed a new statistic index called as FREEopt-based OCB (FOCB) using the statistical indices Forecasting Range of Error Estimation (FREE) and the percentage of observed data in the CB (Nin), which integrates their combined effect. The Shannon and Shannon PL entropies had close values of the FOCB equal to 8.781 and 9.808, respectively, had the highest certainty in the calculation of shear stress values in circular channels followed by traditional uniform flow shear stress and Tsallis models with close values of 14.491 and 14.895, respectively. However, Renyi entropy with much higher values of FOCB equal to 57.726 has less certainty in the estimation of shear stress than other models. Using the presented results in this study, the amount of confidence in entropy methods in the calculation of shear stress to design and implement different types of open channels and their stability is determined. △ Less

Submitted 10 January, 2020; originally announced January 2020.

Comments: 48 pages, 7 figures

MSC Class: 65Z05

Modeling Climate Change Impact on Wind Power Resources Using Adaptive Neuro-Fuzzy Inference System

Authors: Narjes Nabipour, Amir Mosavi, Eva Hajnal, Laszlo Nadai, Shahab Shamshirband, Kwok-Wing Chau

Abstract: Climate change impacts and adaptations are the subjects to ongoing issues that attract the attention of many researchers. Insight into the wind power potential in an area and its probable variation due to climate change impacts can provide useful information for energy policymakers and strategists for sustainable development and management of the energy. In this study, spatial variation of wind po… ▽ More Climate change impacts and adaptations are the subjects to ongoing issues that attract the attention of many researchers. Insight into the wind power potential in an area and its probable variation due to climate change impacts can provide useful information for energy policymakers and strategists for sustainable development and management of the energy. In this study, spatial variation of wind power density at the turbine hub-height and its variability under future climatic scenarios are taken under consideration. An ANFIS based post-processing technique was employed to match the power outputs of the regional climate model with those obtained from the reference data. The near-surface wind data obtained from a regional climate model are employed to investigate climate change impacts on the wind power resources in the Caspian Sea. Subsequent to converting near-surface wind speed to turbine hub-height speed and computation of wind power density, the results have been investigated to reveal mean annual power, seasonal, and monthly variability for a 20-year period in the present (1981-2000) and in the future (2081-2100). The findings of this study indicated that the middle and northern parts of the Caspian Sea are placed with the highest values of wind power. However, the results of the post-processing technique using adaptive neuro-fuzzy inference system (ANFIS) model showed that the real potential of the wind power in the area is lower than those of projected from the regional climate model. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 24 pages, 13 figures

MSC Class: 68T05

Prediction of flow characteristics in the bubble column reactor by the artificial pheromone-based communication of biological ants

Authors: Shahab Shamshirband, Meisam Babanezhad, Amir Mosavi, Narjes Nabipour, Eva Hajnal, Laszlo Nadai, Kwok-Wing Chau

Abstract: In order to perceive the behavior presented by the multiphase chemical reactors, the ant colony optimization algorithm was combined with computational fluid dynamics (CFD) data. This intelligent algorithm creates a probabilistic technique for computing flow and it can predict various levels of three-dimensional bubble column reactor (BCR). This artificial ant algorithm is mimicking real ant behavi… ▽ More In order to perceive the behavior presented by the multiphase chemical reactors, the ant colony optimization algorithm was combined with computational fluid dynamics (CFD) data. This intelligent algorithm creates a probabilistic technique for computing flow and it can predict various levels of three-dimensional bubble column reactor (BCR). This artificial ant algorithm is mimicking real ant behavior. This method can anticipate the flow characteristics in the reactor using almost 30 % of the whole data in the domain. Following discovering the suitable parameters, the method is used for predicting the points not being simulated with CFD, which represent mesh refinement of Ant colony method. In addition, it is possible to anticipate the bubble-column reactors in the absence of numerical results or training of exact values of evaluated data. The major benefits include reduced computational costs and time savings. The results show a great agreement between ant colony prediction and CFD outputs in different sections of the BCR. The combination of ant colony system and neural network framework can provide the smart structure to estimate biological and nature physics base phenomena. The ant colony optimization algorithm (ACO) framework based on ant behavior can solve all local mathematical answers throughout 3D bubble column reactor. The integration of all local answers can provide the overall solution in the reactor for different characteristics. This new overview of modelling can illustrate new sight into biological behavior in nature. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 24 pages, 10 figures

MSC Class: 68T05

Simulation of Turbulent Flow around a Generic High-Speed Train using Hybrid Models of RANS Numerical Method with Machine Learning

Authors: Alireza Hajipour, Arash Mirabdolah Lavasani, Mohammad Eftekhari Yazdi, Amir Mosavi, Shahaboddin Shamshirband, Kwok-Wing Chau

Abstract: In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes (RANS) equations combined with the turbulence model are applied to solve incompressible turbulent flow around a high-speed train. Flow structure, velocity and p… ▽ More In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes (RANS) equations combined with the turbulence model are applied to solve incompressible turbulent flow around a high-speed train. Flow structure, velocity and pressure contours and streamlines at some typical wind directions are the most important results of this simulation. The maximum and minimum values are specified and discussed. Also, the pressure coefficient for some critical points on the train surface is evaluated. In the following, the wind direction influence the aerodynamic key parameters as drag, lift, and side forces at the mentioned wind directions are analyzed and compared. Moreover, the effects of velocity changes (50, 60, 70, 80 and 90 m/s) are estimated and compared on the above flow and aerodynamic parameters. In the second section of the paper, various data-driven methods including Gene Expression Programming (GEP), Gaussian Process Regression (GPR), and random forest (RF), are applied for predicting output parameters. So, drag, lift, and side forces and also minimum and a maximum of pressure coefficients for mentioned wind directions and velocity are predicted and compared using statistical parameters. Obtained results indicated that RF in all coefficients of wind direction and most coefficients of free stream velocity provided the most accurate predictions. As a conclusion, RF may be recommended for the prediction of aerodynamic coefficients. △ Less

Submitted 25 December, 2019; originally announced January 2020.

Comments: 43 pages, 25 figures, 9 tables

Shear Stress Distribution Prediction in Symmetric Compound Channels Using Data Mining and Machine Learning Models

Authors: Zohreh Sheikh Khozani, Khabat Khosravi, Mohammadamin Torabi, Amir Mosavi, Bahram Rezaei, Timon Rabczuk

Abstract: Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels. In this study, at first, a series of experimental tests were conducted to assess the shear stress distribution in prismatic compound channels. The shear stress values around the whole wetted perimeter were measured in the compound c… ▽ More Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels. In this study, at first, a series of experimental tests were conducted to assess the shear stress distribution in prismatic compound channels. The shear stress values around the whole wetted perimeter were measured in the compound channel with different floodplain widths also in different flow depths in subcritical and supercritical conditions. A set of, data mining and machine learning models including Random Forest (RF), M5P, Random Committee (RC), KStar and Additive Regression Model (AR) implemented on attained data to predict the shear stress distribution in the compound channel. Results indicated among these five models, RF method indicated the most precise results with the highest R2 value of 0.9. Finally, the most powerful data mining method which studied in this research (RF) compared with two well-known analytical models of Shiono and Knight Method (SKM) and Shannon method to acquire the proposed model functioning in predicting the shear stress distribution. The results showed that the RF model has the best prediction performance compared to SKM and Shannon models. △ Less

Submitted 20 December, 2019; originally announced January 2020.

Comments: 29 pages, 6 figures

MSC Class: 68T05

Applying ANN, ANFIS, and LSSVM Models for Estimation of Acid Solvent Solubility in Supercritical CO$_2$

Authors: Amin Bemani, Alireza Baghban, Shahaboddin Shamshirband, Amir Mosavi, Peter Csiba, Annamaria R. Varkonyi-Koczy

Abstract: In the present work, a novel and the robust computational investigation is carried out to estimate solubility of different acids in supercritical carbon dioxide. Four different algorithms such as radial basis function artificial neural network, Multi-layer Perceptron (MLP) artificial neural network (ANN), Least squares support vector machine (LSSVM) and adaptive neuro-fuzzy inference system (ANFIS… ▽ More In the present work, a novel and the robust computational investigation is carried out to estimate solubility of different acids in supercritical carbon dioxide. Four different algorithms such as radial basis function artificial neural network, Multi-layer Perceptron (MLP) artificial neural network (ANN), Least squares support vector machine (LSSVM) and adaptive neuro-fuzzy inference system (ANFIS) are developed to predict the solubility of different acids in carbon dioxide based on the temperature, pressure, hydrogen number, carbon number, molecular weight, and acid dissociation constant of acid. In the purpose of best evaluation of proposed models, different graphical and statistical analyses and also a novel sensitivity analysis are carried out. The present study proposed the great manners for best acid solubility estimation in supercritical carbon dioxide, which can be helpful for engineers and chemists to predict operational conditions in industries. △ Less

Submitted 21 November, 2019; originally announced December 2019.

Comments: 37 pages, 9 figure