-
Massive Multiple Input Massive Multiple Output for 5G Wireless Backhauling
Authors:
Dinh-Thuy Phan-Huy,
Philippe Ratajczak,
Raffaele D'Errico,
Jan Jarvelainen,
Di Kong,
Katsuyuki Haneda,
Berna Bulut,
Aki Karttunen,
Mark Beach,
Evangelos Mellios,
Mario Castaneda,
Mythri Hunukumbure,
Tommy Svensson
Abstract:
In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other.…
▽ More
In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other. Hundreds of data streams are spatially multiplexed through a short range and line of sight massive multiple input massive multiple output propagation channel thanks to a new low complexity spatial multiplexing scheme, called block discrete Fourier transform based spatial multiplexing with maximum ratio transmission. Its performance in real and existing environments is assessed using accurate ray-tracing tools and antenna models. In the best simulated scenario, 1.6 kbits per second per Hz of spectral efficiency is attained, corresponding to 80% of Singular Value Decomposition performance, with a transmitter and a receiver that are 200 and 10,000 times less complex, respectively.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
Overview of Millimeter Wave Communications for Fifth-Generation (5G) Wireless Networks-with a focus on Propagation Models
Authors:
Theodore S. Rappaport,
Yunchou Xing,
George R. MacCartney, Jr.,
Andreas F. Molisch,
Evangelos Mellios,
Jianhua Zhang
Abstract:
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and cha…
▽ More
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies, are compared over the 0.5-100 GHz range.
△ Less
Submitted 24 July, 2017;
originally announced August 2017.
-
An Overview of Massive MIMO Research at the University of Bristol
Authors:
Paul Harris,
Wael Boukley Hasan,
Henry Brice,
Benny Chitambira,
Mark Beach,
Evangelos Mellios,
Andrew Nix,
Simon Armour,
Angela Doufexi
Abstract:
Massive MIMO has rapidly gained popularity as a technology crucial to the capacity advances required for 5G wireless systems. Since its theoretical conception six years ago, research activity has grown exponentially, and there is now a develo** industrial interest to commercialise the technology. For this to happen effectively, we believe it is crucial that further pragmatic research is conducte…
▽ More
Massive MIMO has rapidly gained popularity as a technology crucial to the capacity advances required for 5G wireless systems. Since its theoretical conception six years ago, research activity has grown exponentially, and there is now a develo** industrial interest to commercialise the technology. For this to happen effectively, we believe it is crucial that further pragmatic research is conducted with a view to establish how reality differs from theoretical ideals. This paper presents an overview of the massive MIMO research activities occurring within the Communication Systems & Networks Group at the University of Bristol centred around our 128-antenna real-time testbed, which has been developed through the BIO programmable city initiative in collaboration with NI and Lund University. Through recent preliminary trials, we achieved a world first spectral efficiency of 79.4 bits/s/Hz, and subsequently demonstrated that this could be increased to 145.6 bits/s/Hz. We provide a summary of this work here along with some of our ongoing research directions such as large-scale array wave-front analysis, optimised power control and localisation techniques.
△ Less
Submitted 21 May, 2017;
originally announced May 2017.
-
Indoor 5G 3GPP-like Channel Models for Office and Shop** Mall Environments
Authors:
Katsuyuki Haneda,
Lei Tian,
Henrik Asplund,
Jian Li,
Yi Wang,
David Steer,
Clara Li,
Tommaso Balercia,
Sunguk Lee,
YoungSuk Kim,
Amitava Ghosh,
Timothy Thomas,
Takehiro Nakamura,
Yuichi Kakishima,
Tetsuro Imai,
Haralabos Papadopoulas,
Theodore S. Rappaport,
George R. MacCartney Jr.,
Mathew K. Samimi,
Shu Sun,
Ozge Koymen,
Sooyoung Hur,
Jeongho Park,
Charlie Zhang,
Evangelos Mellios
, et al. (3 additional authors not shown)
Abstract:
Future mobile communications systems are likely to be very different to those of today with new service innovations driven by increasing data traffic demand, increasing processing power of smart devices and new innovative applications. To meet these service demands the telecommunications industry is converging on a common set of 5G requirements which includes network speeds as high as 10 Gbps, cel…
▽ More
Future mobile communications systems are likely to be very different to those of today with new service innovations driven by increasing data traffic demand, increasing processing power of smart devices and new innovative applications. To meet these service demands the telecommunications industry is converging on a common set of 5G requirements which includes network speeds as high as 10 Gbps, cell edge rate greater than 100 Mbps, and latency of less than 1 msec. To reach these 5G requirements the industry is looking at new spectrum bands in the range up to 100 GHz where there is spectrum availability for wide bandwidth channels. For the development of new 5G systems to operate in bands up to 100 GHz there is a need for accurate radio propagation models which are not addressed by existing channel models developed for bands below 6 GHz. This paper presents a preliminary overview of the 5G channel models for bands up to 100 GHz in indoor offices and shop** malls, derived from extensive measurements across a multitude of bands. These studies have found some extensibility of the existing 3GPP models to the higher frequency bands up to 100 GHz. The measurements indicate that the smaller wavelengths introduce an increased sensitivity of the propagation models to the scale of the environment and show some frequency dependence of the path loss as well as increased occurrence of blockage. Further, the penetration loss is highly dependent on the material and tends to increase with frequency. The small-scale characteristics of the channel such as delay spread and angular spread and the multipath richness is somewhat similar over the frequency range, which is encouraging for extending the existing 3GPP models to the wider frequency range. Further work will be carried out to complete these models, but this paper presents the first steps for an initial basis for the model development.
△ Less
Submitted 13 March, 2016;
originally announced March 2016.
-
Transport Layer Performance in 5G mmWave Cellular
Authors:
Menglei Zhang,
Marco Mezzavilla,
Russell Ford,
Sundeep Rangan,
Shivendra Panwar,
Evangelos Mellios,
Di Kong,
Andrew Nix,
Michele Zorzi
Abstract:
The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain…
▽ More
The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain surfaces. Scattering objects come and go as the user moves through the local environment. At the higher end of the mmWave band, rough surface scatter generates cluster-based small-scale fading, where signal levels can vary by more than 20 dB over just a few wavelengths. This high level of channel variability may present significant challenges for congestion control. Using our recently developed end-to-end mmWave ns3-based framework, this paper presents the first performance evaluation of TCP congestion control in next-generation mmWave networks. Importantly, the framework can incorporate detailed models of the mmWave channel, beam- forming and tracking algorithms, and builds on statistical channel models derived from real measurements in New York City, as well as detailed ray traces.
△ Less
Submitted 8 March, 2016;
originally announced March 2016.
-
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
Authors:
Katsuyuki Haneda,
Lei Tian,
Yi Zheng,
Henrik Asplund,
Jian Li,
Yi Wang,
David Steer,
Clara Li,
Tommaso Balercia,
Sunguk Lee,
YoungSuk Kim,
Amitava Ghosh,
Timothy Thomas,
Takehiro Nakamura,
Yuichi Kakishima,
Tetsuro Imai,
Haralabos Papadopoulas,
Theodore S. Rappaport,
George R. MacCartney Jr.,
Mathew K. Samimi,
Shu Sun,
Ozge Koymen,
Sooyoung Hur,
Jeongho Park,
Charlie Zhang
, et al. (4 additional authors not shown)
Abstract:
For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing re…
▽ More
For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing results across a multitude of frequencies from 6 GHz to 100 GHz, and this document describes an initial 3D channel model which includes: 1) typical deployment scenarios for urban microcells (UMi) and urban macrocells (UMa), and 2) a baseline model for incorporating path loss, shadow fading, line of sight probability, penetration and blockage models for the typical scenarios. Various processing methodologies such as clustering and antenna decoupling algorithms are also presented.
△ Less
Submitted 25 February, 2016; v1 submitted 24 February, 2016;
originally announced February 2016.