-
Channel Estimation for mmWave MIMO using sub-6 GHz Out-of-Band Information
Authors:
Faruk Pasic,
Markus Hofer,
Mariam Mussbah,
Sebastian Caban,
Stefan Schwarz,
Thomas Zemen,
Christoph F. Mecklenbräuker
Abstract:
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating channel state information (CSI) which is difficult to acquire at mmWave frequencies due to a low signal-to-noise ratio (SNR). In this paper, we propose three novel me…
▽ More
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating channel state information (CSI) which is difficult to acquire at mmWave frequencies due to a low signal-to-noise ratio (SNR). In this paper, we propose three novel methods to estimate mmWave MIMO channels using out-of-band information obtained from the sub-6GHz band. We compare the proposed channel estimation methods with a conventional one utilizing only in-band information. Simulation results show that the proposed methods outperform the conventional mmWave channel estimation method in terms of achievable spectral efficiency, especially at low SNR and high K-factor.
△ Less
Submitted 26 February, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
Oversampled Adaptive Sensing with Random Projections: Analysis and Algorithmic Approaches
Authors:
Ralf R. Müller,
Ali Bereyhi,
Christoph F. Mecklenbräuker
Abstract:
Oversampled adaptive sensing (OAS) is a recently proposed Bayesian framework which sequentially adapts the sensing basis. In OAS, estimation quality is, in each step, measured by conditional mean squared errors (MSEs), and the basis for the next sensing step is adapted accordingly. For given average sensing time, OAS reduces the MSE compared to non-adaptive schemes, when the signal is sparse. This…
▽ More
Oversampled adaptive sensing (OAS) is a recently proposed Bayesian framework which sequentially adapts the sensing basis. In OAS, estimation quality is, in each step, measured by conditional mean squared errors (MSEs), and the basis for the next sensing step is adapted accordingly. For given average sensing time, OAS reduces the MSE compared to non-adaptive schemes, when the signal is sparse. This paper studies the asymptotic performance of Bayesian OAS, for unitarily invariant random projections. For sparse signals, it is shown that OAS with Bayesian recovery and hard adaptation significantly outperforms the minimum MSE bound for non-adaptive sensing. To address implementational aspects, two computationally tractable algorithms are proposed, and their performances are compared against the state-of-the-art non-adaptive algorithms via numerical simulations. Investigations depict that these low-complexity OAS algorithms, despite their suboptimality, outperform well-known non-adaptive schemes for sparse recovery, such as LASSO, with rather small oversampling factors. This gain grows, as the compression rate increases.
△ Less
Submitted 15 November, 2018;
originally announced November 2018.
-
Oversampled Adaptive Sensing
Authors:
Ralf R. Müller,
Ali Bereyhi,
Christoph F. Mecklenbräuker
Abstract:
We develop a Bayesian framework for sensing which adapts the sensing time and/or basis functions to the instantaneous sensing quality measured in terms of the expected posterior mean-squared error. For sparse Gaussian sources a significant reduction in average sensing time and/or mean-squared error is achieved in comparison to non-adaptive sensing. For compression ratio 3, a sparse 10% Gaussian so…
▽ More
We develop a Bayesian framework for sensing which adapts the sensing time and/or basis functions to the instantaneous sensing quality measured in terms of the expected posterior mean-squared error. For sparse Gaussian sources a significant reduction in average sensing time and/or mean-squared error is achieved in comparison to non-adaptive sensing. For compression ratio 3, a sparse 10% Gaussian source and equal average sensing times, the proposed method gains about 2 dB over the performance bound of optimum compressive sensing, about 3 dB over non-adaptive 3-fold oversampled orthogonal sensing and about 6 to 7 dB to LASSO-based recovery schemes while enjoying polynomial time complexity.
We utilize that in the presence of Gaussian noise the mean-squared error conditioned on the current observation is proportional to the derivative of the conditional mean estimate with respect to this observation.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Multi Snapshot Sparse Bayesian Learning for DOA Estimation
Authors:
Peter Gerstoft,
Christoph F. Mecklenbräuker,
Angeliki Xenaki
Abstract:
The directions of arrival (DOA) of plane waves are estimated from multi-snapshot sensor array data using Sparse Bayesian Learning (SBL). The prior source amplitudes is assumed independent zero-mean complex Gaussian distributed with hyperparameters the unknown variances (i.e. the source powers). For a complex Gaussian likelihood with hyperparameter the unknown noise variance, the corresponding Gaus…
▽ More
The directions of arrival (DOA) of plane waves are estimated from multi-snapshot sensor array data using Sparse Bayesian Learning (SBL). The prior source amplitudes is assumed independent zero-mean complex Gaussian distributed with hyperparameters the unknown variances (i.e. the source powers). For a complex Gaussian likelihood with hyperparameter the unknown noise variance, the corresponding Gaussian posterior distribution is derived. For a given number of DOAs, the hyperparameters are automatically selected by maximizing the evidence and promote sparse DOA estimates. The SBL scheme for DOA estimation is discussed and evaluated competitively against LASSO ($\ell_1$-regularization), conventional beamforming, and MUSIC
△ Less
Submitted 29 February, 2016;
originally announced February 2016.
-
Multiple and single snapshot compressive beamforming
Authors:
Peter Gerstoft,
Angeliki Xenaki,
Christoph F. Mecklenbräuker
Abstract:
For a sound field observed on a sensor array, compressive sensing (CS) reconstructs the direction-of-arrival (DOA) of multiple sources using a sparsity constraint. The DOA estimation is posed as an underdetermined problem by expressing the acoustic pressure at each sensor as a phase-lagged superposition of source amplitudes at all hypothetical DOAs. Regularizing with an $\ell_1$-norm constraint re…
▽ More
For a sound field observed on a sensor array, compressive sensing (CS) reconstructs the direction-of-arrival (DOA) of multiple sources using a sparsity constraint. The DOA estimation is posed as an underdetermined problem by expressing the acoustic pressure at each sensor as a phase-lagged superposition of source amplitudes at all hypothetical DOAs. Regularizing with an $\ell_1$-norm constraint renders the problem solvable with convex optimization, and promoting sparsity gives high-resolution DOA maps. Here, the sparse source distribution is derived using maximum a posteriori (MAP) estimates for both single and multiple snapshots. CS does not require inversion of the data covariance matrix and thus works well even for a single snapshot where it gives higher resolution than conventional beamforming. For multiple snapshots, CS outperforms conventional high-resolution methods, even with coherent arrivals and at low signal-to-noise ratio. The superior resolution of CS is demonstrated with vertical array data from the SWellEx96 experiment for coherent multi-paths.
△ Less
Submitted 21 August, 2015; v1 submitted 8 March, 2015;
originally announced March 2015.
-
Using the LASSO's Dual for Regularization in Sparse Signal Reconstruction from Array Data
Authors:
Christoph F. Mecklenbräuker,
Peter Gerstoft,
Erich Zöchmann
Abstract:
Waves from a sparse set of source hidden in additive noise are observed by a sensor array. We treat the estimation of the sparse set of sources as a generalized complex-valued LASSO problem. The corresponding dual problem is formulated and it is shown that the dual solution is useful for selecting the regularization parameter of the LASSO when the number of sources is given. The solution path of t…
▽ More
Waves from a sparse set of source hidden in additive noise are observed by a sensor array. We treat the estimation of the sparse set of sources as a generalized complex-valued LASSO problem. The corresponding dual problem is formulated and it is shown that the dual solution is useful for selecting the regularization parameter of the LASSO when the number of sources is given. The solution path of the complex-valued LASSO is analyzed. For a given number of sources, the corresponding regularization parameter is determined by an order-recursive algorithm and two iterative algorithms that are based on a further approximation. Using this regularization parameter, the DOAs of all sources are estimated.
△ Less
Submitted 2 September, 2015; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Time- and Frequency-Varying $K$-Factor of Non-Stationary Vehicular Channels for Safety Relevant Scenarios
Authors:
Laura Bernadó,
Thomas Zemen,
Fredrik Tufvesson,
Andreas F. Molisch,
Christoph F. Mecklenbräuker
Abstract:
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time-frequency variability of this channel parameter using vehicular channel measurements a…
▽ More
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time-frequency variability of this channel parameter using vehicular channel measurements at 5.6 GHz with a bandwidth of 240 MHz for safety-relevant scenarios in intelligent transportation systems (ITS). This data enables a frequency-variability analysis from an IEEE 802.11p system point of view, which uses 10 MHz channels. We show that the small-scale fading of the envelope of the first delay bin is Ricean distributed with a varying $K$-factor. The later delay bins are Rayleigh distributed. We demonstrate that the $K$-factor cannot be assumed to be constant in time and frequency. The causes of these variations are the frequency-varying antenna radiation patterns as well as the time-varying number of active scatterers, and the effects of vegetation. We also present a simple but accurate bi-modal Gaussian mixture model, that allows to capture the $K$-factor variability in time for safety-relevant ITS scenarios.
△ Less
Submitted 25 April, 2014; v1 submitted 17 June, 2013;
originally announced June 2013.
-
Delay and Doppler Spreads of Non-Stationary Vehicular Channels for Safety Relevant Scenarios
Authors:
Laura Bernadó,
Thomas Zemen,
Fredrik Tufvesson,
Andreas F. Molisch,
Christoph F. Mecklenbräuker
Abstract:
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to rapid changes in the environment. The non-stationary fading process can be characterized by assuming local stationarity for a region with finite extent in time and frequency. For this finite region the wide-sense stationarity and uncorrelated-scattering (WSSUS) assumption hold…
▽ More
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to rapid changes in the environment. The non-stationary fading process can be characterized by assuming local stationarity for a region with finite extent in time and frequency. For this finite region the wide-sense stationarity and uncorrelated-scattering (WSSUS) assumption holds approximately and we are able to calculate a time and frequency dependent local scattering function (LSF). In this paper, we estimate the LSF from a large set of measurements collected in the DRIVEWAY'09 measurement campaign, which focuses on scenarios for intelligent transportation systems. We then obtain the time-frequency-varying power delay profile (PDP) and the time-frequency-varying Doppler power spectral density (DSD) from the LSF. Based on the PDP and the DSD, we analyze the time-frequency-varying root mean square (RMS) delay spread and the RMS Doppler spread. We show that the distribution of these channel parameters follows a bi-modal Gaussian mixture distribution. High RMS delay spread values are observed in situations with rich scattering, while high RMS Doppler spreads are obtained in drive-by scenarios.
△ Less
Submitted 15 May, 2013;
originally announced May 2013.