Showing 1–23 of 23 results for author: Mansouri, S

Addressing Data Annotation Challenges in Multiple Sensors: A Solution for Scania Collected Datasets

Authors: A**kya Khoche, Aron Asefaw, Alejandro Gonzalez, Bogdan Timus, Sina Sharif Mansouri, Patric Jensfelt

Abstract: Data annotation in autonomous vehicles is a critical step in the development of Deep Neural Network (DNN) based models or the performance evaluation of the perception system. This often takes the form of adding 3D bounding boxes on time-sequential and registered series of point-sets captured from active sensors like Light Detection and Ranging (LiDAR) and Radio Detection and Ranging (RADAR). When… ▽ More Data annotation in autonomous vehicles is a critical step in the development of Deep Neural Network (DNN) based models or the performance evaluation of the perception system. This often takes the form of adding 3D bounding boxes on time-sequential and registered series of point-sets captured from active sensors like Light Detection and Ranging (LiDAR) and Radio Detection and Ranging (RADAR). When annotating multiple active sensors, there is a need to motion compensate and translate the points to a consistent coordinate frame and timestamp respectively. However, highly dynamic objects pose a unique challenge, as they can appear at different timestamps in each sensor's data. Without knowing the speed of the objects, their position appears to be different in different sensor outputs. Thus, even after motion compensation, highly dynamic objects are not matched from multiple sensors in the same frame, and human annotators struggle to add unique bounding boxes that capture all objects. This article focuses on addressing this challenge, primarily within the context of Scania collected datasets. The proposed solution takes a track of an annotated object as input and uses the Moving Horizon Estimation (MHE) to robustly estimate its speed. The estimated speed profile is utilized to correct the position of the annotated box and add boxes to object clusters missed by the original annotation. △ Less

Submitted 27 March, 2024; originally announced March 2024.

Comments: Accepted to European Control Conference 2024

Towards Long-Range 3D Object Detection for Autonomous Vehicles

Authors: A**kya Khoche, Laura Pereira Sánchez, Nazre Batool, Sina Sharif Mansouri, Patric Jensfelt

Abstract: 3D object detection at long range is crucial for ensuring the safety and efficiency of self driving vehicles, allowing them to accurately perceive and react to objects, obstacles, and potential hazards from a distance. But most current state of the art LiDAR based methods are range limited due to sparsity at long range, which generates a form of domain gap between points closer to and farther away… ▽ More 3D object detection at long range is crucial for ensuring the safety and efficiency of self driving vehicles, allowing them to accurately perceive and react to objects, obstacles, and potential hazards from a distance. But most current state of the art LiDAR based methods are range limited due to sparsity at long range, which generates a form of domain gap between points closer to and farther away from the ego vehicle. Another related problem is the label imbalance for faraway objects, which inhibits the performance of Deep Neural Networks at long range. To address the above limitations, we investigate two ways to improve long range performance of current LiDAR based 3D detectors. First, we combine two 3D detection networks, referred to as range experts, one specializing at near to mid range objects, and one at long range 3D detection. To train a detector at long range under a scarce label regime, we further weigh the loss according to the labelled point's distance from ego vehicle. Second, we augment LiDAR scans with virtual points generated using Multimodal Virtual Points (MVP), a readily available image-based depth completion algorithm. Our experiments on the long range Argoverse2 (AV2) dataset indicate that MVP is more effective in improving long range performance, while maintaining a straightforward implementation. On the other hand, the range experts offer a computationally efficient and simpler alternative, avoiding dependency on image-based segmentation networks and perfect camera-LiDAR calibration. △ Less

Submitted 20 May, 2024; v1 submitted 7 October, 2023; originally announced October 2023.

Comments: Accepted to Intelligent Vehicle Symposium (IV) 2024

emojiSpace: Spatial Representation of Emojis

Authors: Moeen Mostafavi, Mahsa Pahlavikhah Varnosfaderani, Fateme Nikseresht, Seyed Ahmad Mansouri

Abstract: In the absence of nonverbal cues during messaging communication, users express part of their emotions using emojis. Thus, having emojis in the vocabulary of text messaging language models can significantly improve many natural language processing (NLP) applications such as online communication analysis. On the other hand, word embedding models are usually trained on a very large corpus of text suc… ▽ More In the absence of nonverbal cues during messaging communication, users express part of their emotions using emojis. Thus, having emojis in the vocabulary of text messaging language models can significantly improve many natural language processing (NLP) applications such as online communication analysis. On the other hand, word embedding models are usually trained on a very large corpus of text such as Wikipedia or Google News datasets that include very few samples with emojis. In this study, we create emojiSpace, which is a combined word-emoji embedding using the word2vec model from the Genism library in Python. We trained emojiSpace on a corpus of more than 4 billion tweets and evaluated it by implementing sentiment analysis on a Twitter dataset containing more than 67 million tweets as an extrinsic task. For this task, we compared the performance of two different classifiers of random forest (RF) and linear support vector machine (SVM). For evaluation, we compared emojiSpace performance with two other pre-trained embeddings and demonstrated that emojiSpace outperforms both. △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: 5 pages, 5 tables

Multi-Stage NMPC for a MAV based Collision Free Navigation under Varying Communication Delays

Authors: Andreas Papadimitriou, Hedyeh Jafari, Sina Sharif Mansouri, George Nikolakopoulos

Abstract: Time delays in communication networks are one of the main concerns in deploying robots with computation boards on the edge. This article proposes a multi-stage Nonlinear Model Predictive Control (NMPC) that is capable of handling varying network-induced time delays for establishing a control framework being able to guarantee collision-free Micro Aerial Vehicles (MAVs) navigation. This study introd… ▽ More Time delays in communication networks are one of the main concerns in deploying robots with computation boards on the edge. This article proposes a multi-stage Nonlinear Model Predictive Control (NMPC) that is capable of handling varying network-induced time delays for establishing a control framework being able to guarantee collision-free Micro Aerial Vehicles (MAVs) navigation. This study introduces a novel approach that considers different sampling times by a tree of discretization scenarios contrary to the existing typical multi-stage NMPC where system uncertainties are modeled by a tree of scenarios. Additionally, the proposed method considers adaptive weights for the multi-stage NMPC scenarios based on the probability of time delays in the communication link. As a result of the multi-stage NMPC, the obtained optimal control action is valid for multiple sampling times. Finally, the overall effectiveness of the proposed novel control framework is demonstrated in various tests and different simulation environments. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Reactive Navigation of an Unmanned Aerial Vehicle with Perception-based Obstacle Avoidance Constraints

Authors: Björn Lindqvist, Sina Sharif Mansouri, Jakub Haluška, George Nikolakopoulos

Abstract: In this article we propose a reactive constrained navigation scheme, with embedded obstacles avoidance for an Unmanned Aerial Vehicle (UAV), for enabling navigation in obstacle-dense environments. The proposed navigation architecture is based on Nonlinear Model Predictive Control (NMPC), and utilizes an on-board 2D LiDAR to detect obstacles and translate online the key geometric information of the… ▽ More In this article we propose a reactive constrained navigation scheme, with embedded obstacles avoidance for an Unmanned Aerial Vehicle (UAV), for enabling navigation in obstacle-dense environments. The proposed navigation architecture is based on Nonlinear Model Predictive Control (NMPC), and utilizes an on-board 2D LiDAR to detect obstacles and translate online the key geometric information of the environment into parametric constraints for the NMPC that constrain the available position-space for the UAV. This article focuses also on the real-world implementation and experimental validation of the proposed reactive navigation scheme, and it is applied in multiple challenging laboratory experiments, where we also conduct comparisons with relevant methods of reactive obstacle avoidance. The solver utilized in the proposed approach is the Optimization Engine (OpEn) and the Proximal Averaged Newton for Optimal Control (PANOC) algorithm, where a penalty method is applied to properly consider obstacles and input constraints during the navigation task. The proposed novel scheme allows for fast solutions, while using limited on-board computational power, that is a required feature for the overall closed loop performance of an UAV and is applied in multiple real-time scenarios. The combination of built-in obstacle avoidance and real-time applicability makes the proposed reactive constrained navigation scheme an elegant framework for UAVs that is able to perform fast nonlinear control, local path-planning and obstacle avoidance, all embedded in the control layer. △ Less

Submitted 4 July, 2022; originally announced July 2022.

Comments: 16 pages, 28 figures

ACM Class: I.2.9

Journal ref: IEEE Transactions on Control Systems Technology (2021) Early Access

Collision avoidance for multiple MAVs using fast centralized NMPC

Authors: Björn Lindqvist, Sina Sharif Mansouri, Pantelis Sopasakis, George Nikolakopoulos

Abstract: This article proposes a novel control architecture using a centralized nonlinear model predictive control (CNMPC) scheme for controlling multiple micro aerial vehicles (MAVs). The control architecture uses an augmented state system to control multiple agents and performs both obstacle and collision avoidance. The optimization algorithm used is OpEn, based on the proximal averaged Newton type metho… ▽ More This article proposes a novel control architecture using a centralized nonlinear model predictive control (CNMPC) scheme for controlling multiple micro aerial vehicles (MAVs). The control architecture uses an augmented state system to control multiple agents and performs both obstacle and collision avoidance. The optimization algorithm used is OpEn, based on the proximal averaged Newton type method for optimal control (PANOC) which provides fast convergence for non-convex optimization problems. The objective is to perform position reference tracking for each individual agent, while nonlinear constrains guarantee collision avoidance and smooth control signals. To produce a trajectory that satisfies all constraints a penalty method is applied to the nonlinear constraints. The efficacy of this proposed novel control scheme is successfully demonstrated through simulation results and comparisons, in terms of computation time and constraint violations, while are provided with respect to the number of agents. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Comments: 8 pages, 10 figures

MSC Class: I.2.9

Journal ref: International Federation of Automatic Control 2020

COMPRA: A COMPact Reactive Autonomy framework for subterranean MAV based search-and-rescue operations

Authors: Björn Lindqvist, Christoforos Kanellakis, Sina Sharif Mansouri, Ali-akbar Agha-mohammadi, George Nikolakopoulos

Abstract: This work establishes COMPRA, a compact and reactive autonomy framework for fast deployment of Micro Aerial Vehicles (MAVs) in subterranean Search-and-Rescue (SAR) missions. A COMPRA-enabled MAV is able to autonomously explore previously unknown areas while specific mission criteria are considered e.g. an object of interest is identified and localized, the remaining useful battery life, the overal… ▽ More This work establishes COMPRA, a compact and reactive autonomy framework for fast deployment of Micro Aerial Vehicles (MAVs) in subterranean Search-and-Rescue (SAR) missions. A COMPRA-enabled MAV is able to autonomously explore previously unknown areas while specific mission criteria are considered e.g. an object of interest is identified and localized, the remaining useful battery life, the overall desired exploration mission duration. The proposed architecture follows a low-complexity algorithmic design to facilitate fully on-board computations, including nonlinear control, state-estimation, navigation, exploration behavior and object localization capabilities. The framework is mainly structured around a reactive local avoidance planner, based on enhanced Potential Field concepts and using instantaneous 3D pointclouds, as well as a computationally efficient heading regulation technique, based on depth images from an instantaneous camera stream. Those techniques decouple the collision-free path generation from the dependency of a global map and are capable of handling imprecise localization occasions. Field experimental verification of the overall architecture is performed in relevant unknown Global Positioning System (GPS)-denied environments. △ Less

Submitted 16 February, 2022; v1 submitted 30 August, 2021; originally announced August 2021.

Comments: 27 pages, 21 figures

MSC Class: I.2.9

Geometry Aware NMPC Scheme for Morphing Quadrotor Navigation in Restricted Entrances

Authors: Andreas Papadimitriou, Sina Sharif Mansouri, Christoforos Kanellakis, George Nikolakopoulos

Abstract: Geometry-morphing Micro Aerial Vehicles (MAVs) are gaining more and more attention lately, since their ability to modify their geometric morphology in-flight increases their versatility, while expanding their application range. In this novel research field, most of the works focus on the platform design and on the low-level control part for maintaining stability after the deformation. Nevertheless… ▽ More Geometry-morphing Micro Aerial Vehicles (MAVs) are gaining more and more attention lately, since their ability to modify their geometric morphology in-flight increases their versatility, while expanding their application range. In this novel research field, most of the works focus on the platform design and on the low-level control part for maintaining stability after the deformation. Nevertheless, another aspect of geometry morphing MAVs is the association of the deformation with respect to the shape and structure of the environment. In this article, we propose a novel Nonlinear Model Predictive Control (NMPC) structure that modifies the morphology of a quadrotor based on the environmental entrances geometrical shape. The proposed method considers restricted entrances as a constraint in the NMPC and modifies the arm configuration of the MAV to provide a collision free path from the initial position to the desired goal, while passing through the entrance. To the authors' best knowledge, this work is the first to connect the in-flight morphology with the characteristics of environmental shapes. Multiple simulation results depict the performance and efficiency of the proposed scheme in scenarios where the quadrotor is commanded to pass through restricted areas. △ Less

Submitted 8 January, 2021; originally announced January 2021.

Nonlinear MPC for Collision Avoidance and Controlof UAVs With Dynamic Obstacles

Authors: Björn Lindqvist, Sina Sharif Mansouri, Ali-akbar Agha-mohammadi, George Nikolakopoulos

Abstract: This article proposes a Novel Nonlinear Model Predictive Control (NMPC) for navigation and obstacle avoidance of an Unmanned Aerial Vehicle (UAV). The proposed NMPC formulation allows for a fully parametric obstacle trajectory, while in this article we apply a classification scheme to differentiate between different kinds of trajectories to predict future obstacle positions. The trajectory calcula… ▽ More This article proposes a Novel Nonlinear Model Predictive Control (NMPC) for navigation and obstacle avoidance of an Unmanned Aerial Vehicle (UAV). The proposed NMPC formulation allows for a fully parametric obstacle trajectory, while in this article we apply a classification scheme to differentiate between different kinds of trajectories to predict future obstacle positions. The trajectory calculation is done from an initial condition, and fed to the NMPC as an additional input. The solver used is the nonlinear, non-convex solver Proximal Averaged Newton for Optimal Control (PANOC) and its associated software OpEn (Optimization Engine), in which we apply a penalty method to properly consider the obstacles and other constraints during navigation. The proposed NMPC scheme allows for real-time solutions using a sampling time of 50 ms and a two second prediction of both the obstacle trajectory and the NMPC problem, which implies that the scheme can be considered as a local path-planner. This paper will present the NMPC cost function and constraint formulation, as well as the methodology of dealing with the dynamic obstacles. We include multiple laboratory experiments to demonstrate the efficacy of the proposed control architecture, and to show that the proposed method delivers fast and computationally stable solutions to the dynamic obstacle avoidance scenarios. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: 8 pages, 10 figures

Journal ref: IEEE Robotics and Automation Letters, vol. 5, no. 4, pp. 6001-6008, Oct. 2020

A Unified NMPC Scheme for MAVs Navigation with 3D Collision Avoidance under Position Uncertainty

Authors: Sina Sharif Mansouri, Christoforos Kanellakis, Bjorn Lindqvist, Farhad Pourkamali-Anaraki, Ali-akbar Agha-mohammadi, Joel Burdick, George Nikolakopoulos

Abstract: This article proposes a novel Nonlinear Model Predictive Control (NMPC) framework for Micro Aerial Vehicle (MAV) autonomous navigation in constrained environments. The introduced framework allows us to consider the nonlinear dynamics of MAVs and guarantees real-time performance. Our first contribution is to design a computationally efficient subspace clustering method to reveal from geometrical co… ▽ More This article proposes a novel Nonlinear Model Predictive Control (NMPC) framework for Micro Aerial Vehicle (MAV) autonomous navigation in constrained environments. The introduced framework allows us to consider the nonlinear dynamics of MAVs and guarantees real-time performance. Our first contribution is to design a computationally efficient subspace clustering method to reveal from geometrical constraints to underlying constraint planes within a 3D point cloud, obtained from a 3D lidar scanner. The second contribution of our work is to incorporate the extracted information into the nonlinear constraints of NMPC for avoiding collisions. Our third contribution focuses on making the controller robust by considering the uncertainty of localization and NMPC using the Shannon entropy. This step enables us to track either the position or velocity references, or none of them if necessary. As a result, the collision avoidance constraints are defined in the local coordinates of MAVs and it remains active and guarantees collision avoidance, despite localization uncertainties, e.g., position estimation drifts. Additionally, as the platform continues the mission, this will result in less uncertain position estimations, due to the feature extraction and loop closure. The efficacy of the suggested framework has been evaluated using various simulations in the Gazebo environment. △ Less

Submitted 31 July, 2020; originally announced July 2020.

Journal ref: IEEE Robotics and Automation Letters, Volume 5, Issue 4, On Page(s) 5740-5747, October 2020

Subterranean MAV Navigation based on Nonlinear MPC with Collision Avoidance Constraints

Authors: Sina Sharif Mansouri, Christoforos Kanellakis, Emil Fresk, Bjorn Lindqvist, Dariusz Kominiak, Anton Koval, Pantelis Sopasakis, George Nikolakopoulos

Abstract: Micro Aerial Vehicles (MAVs) navigation in subterranean environments is gaining attention in the field of aerial robotics, however there are still multiple challenges for collision free navigation in such harsh environments. This article proposes a novel baseline solution for collision free navigation with Nonlinear Model Predictive Control (NMPC). In the proposed method, the MAV is considered as… ▽ More Micro Aerial Vehicles (MAVs) navigation in subterranean environments is gaining attention in the field of aerial robotics, however there are still multiple challenges for collision free navigation in such harsh environments. This article proposes a novel baseline solution for collision free navigation with Nonlinear Model Predictive Control (NMPC). In the proposed method, the MAV is considered as a floating object, where the velocities on the $x$, $y$ axes and the position on altitude are the references for the NMPC to navigate along the tunnel, while the NMPC avoids the collision by considering kinematics of the obstacles based on measurements from a 2D lidar. Moreover, a novel approach for correcting the heading of the MAV towards the center of the mine tunnel is proposed, while the efficacy of the suggested framework has been evaluated in multiple field trials in an underground mine in Sweden. △ Less

Submitted 7 June, 2020; originally announced June 2020.

Unsupervised Learning for Subterranean Junction Recognition Based on 2D Point Cloud

Authors: Sina Sharif Mansouri, Farhad Pourkamali-Anaraki, Miguel Castano Arranz, Ali-akbar Agha-mohammadi, Joel Burdick, George Nikolakopoulos

Abstract: This article proposes a novel unsupervised learning framework for detecting the number of tunnel junctions in subterranean environments based on acquired 2D point clouds. The implementation of the framework provides valuable information for high level mission planners to navigate an aerial platform in unknown areas or robot homing missions. The framework utilizes spectral clustering, which is capa… ▽ More This article proposes a novel unsupervised learning framework for detecting the number of tunnel junctions in subterranean environments based on acquired 2D point clouds. The implementation of the framework provides valuable information for high level mission planners to navigate an aerial platform in unknown areas or robot homing missions. The framework utilizes spectral clustering, which is capable of uncovering hidden structures from connected data points lying on non-linear manifolds. The spectral clustering algorithm computes a spectral embedding of the original 2D point cloud by utilizing the eigen decomposition of a matrix that is derived from the pairwise similarities of these points. We validate the developed framework using multiple data-sets, collected from multiple realistic simulations, as well as from real flights in underground environments, demonstrating the performance and merits of the proposed methodology. △ Less

Submitted 7 June, 2020; originally announced June 2020.

MAV Navigation in Unknown Dark Underground Mines Using Deep Learning

Authors: Sina Sharif Mansouri, Christoforos Kanellakis, Petros Karvelis, Dariusz Kominiak, George Nikolakopoulos

Abstract: This article proposes a Deep Learning (DL) method to enable fully autonomous flights for low-cost Micro Aerial Vehicles (MAVs) in unknown dark underground mine tunnels. This kind of environments pose multiple challenges including lack of illumination, narrow passages, wind gusts and dust. The proposed method does not require accurate pose estimation and considers the flying platform as a floating… ▽ More This article proposes a Deep Learning (DL) method to enable fully autonomous flights for low-cost Micro Aerial Vehicles (MAVs) in unknown dark underground mine tunnels. This kind of environments pose multiple challenges including lack of illumination, narrow passages, wind gusts and dust. The proposed method does not require accurate pose estimation and considers the flying platform as a floating object. The Convolutional Neural Network (CNN) supervised image classifier method corrects the heading of the MAV towards the center of the mine tunnel by processing the image frames from a single on-board camera, while the platform navigates at constant altitude and desired velocity references. Moreover, the output of the CNN module can be used from the operator as means of collision prediction information. The efficiency of the proposed method has been successfully experimentally evaluated in multiple field trials in an underground mine in Sweden, demonstrating the capability of the proposed method in different areas and illumination levels. △ Less

Submitted 7 June, 2020; originally announced June 2020.

MAV Development Towards Navigation in Unknown and Dark Mining Tunnels

Authors: Dariusz Kominiak, Sina Sharif Mansouri, Christoforos Kanellakis, George Nikolakopoulos

Abstract: The Mining industry considers the deployment of MAV for autonomous inspection of tunnels and shafts to increase safety and productivity. However, mines are challenging and harsh environments that have a direct effect on the degradation of high-end and expensive utilized components over time. Inspired by this effect, this article presents a low cost and modular platform for designing a fully autono… ▽ More The Mining industry considers the deployment of MAV for autonomous inspection of tunnels and shafts to increase safety and productivity. However, mines are challenging and harsh environments that have a direct effect on the degradation of high-end and expensive utilized components over time. Inspired by this effect, this article presents a low cost and modular platform for designing a fully autonomous navigating MAV without requiring any prior information from the surrounding environment. The design of the proposed aerial vehicle can be considered as a consumable platform that can be instantly replaced in case of damage or defect, thus comes into agreement with the vision of mining companies for utilizing stable aerial robots with reasonable cost. In the proposed design, the operator has access to all on-board data, thus increasing the overall customization of the design and the execution of the mine inspection mission. The MAV platform has a software core based on ROS operating on an Aaeon UP-Board, while it is equipped with a sensor suite to accomplish the autonomous navigation equally reliable when compared to high-end and expensive platforms. △ Less

Submitted 29 May, 2020; originally announced May 2020.

Comments: This is article has been accepted in 28th Mediterranean Conference on Control and Automation (MED'2020)

Visual Area Coverage with Attitude-Dependent Camera Footprints by Particle Harvesting

Authors: Sina Sharif Mansouri, Pantelis Sopasakis, George Georgoulas, Thomas Gustafsson, George Nikolakopoulos

Abstract: In aerial visual area coverage missions, the camera footprint changes over time based on the camera position and orientation -- a fact that complicates the whole process of coverage and path planning. This article proposes a solution to the problem of visual coverage by filling the target area with a set of randomly distributed particles and harvesting them by camera footprints. This way, high cov… ▽ More In aerial visual area coverage missions, the camera footprint changes over time based on the camera position and orientation -- a fact that complicates the whole process of coverage and path planning. This article proposes a solution to the problem of visual coverage by filling the target area with a set of randomly distributed particles and harvesting them by camera footprints. This way, high coverage is obtained at a low computational cost. In this approach, the path planner considers six degrees of freedom (DoF) for the camera movement and commands thrust and attitude references to a lower layer controller, while maximizing the covered area and coverage quality. The proposed method requires a priori information of the boundaries of the target area and can handle areas of very complex and highly non-convex geometry. The effectiveness of the approach is demonstrated in multiple simulations in terms of computational efficiency and coverage. △ Less

Submitted 15 September, 2019; v1 submitted 10 September, 2019; originally announced September 2019.

Autonomous visual inspection of large-scale infrastructures using aerial robots

Authors: Christoforos Kanellakis, Emil Fresk, Sina Sharif Mansouri, Dariusz Kominiak, George Nikolakopoulos

Abstract: This article presents a novel framework for performing visual inspection around 3D infrastructures, by establishing a team of fully autonomous Micro Aerial Vehicles (MAVs) with robust localization, planning and perception capabilities. The proposed aerial inspection system reaches high level of autonomy on a large scale, while pushing to the boundaries the real life deployment of aerial robotics.… ▽ More This article presents a novel framework for performing visual inspection around 3D infrastructures, by establishing a team of fully autonomous Micro Aerial Vehicles (MAVs) with robust localization, planning and perception capabilities. The proposed aerial inspection system reaches high level of autonomy on a large scale, while pushing to the boundaries the real life deployment of aerial robotics. In the presented approach, the MAVs deployed for the inspection of the structure rely only on their onboard computer and sensory systems. The developed framework envisions a modular system, combining open research challenges in the fields of localization, path planning and map**, with an overall capability for a fast on site deployment and a reduced execution time that can repeatably perform the inspection mission according to the operator needs. The architecture of the established system includes: 1) a geometry-based path planner for coverage of complex structures by multiple MAVs, 2) an accurate yet flexible localization component, which provides an accurate pose estimation for the MAVs by utilizing an Ultra Wideband fused inertial estimation scheme, and 3) visual data post-processing scheme for the 3D model building. The performance of the proposed framework has been experimentally demonstrated in multiple realistic outdoor field trials, all focusing on the challenging structure of a wind turbine as the main test case. The successful experimental results, depict the merits of the proposed autonomous navigation system as the enabling technology towards aerial robotic inspectors. △ Less

Submitted 16 January, 2019; originally announced January 2019.

Rigid vs compliant contact: An experimental study on biped walking

Authors: Majid Khadiv, S. Ali A. Moosvian, Aghil Yousefi-Koma, Majid Sadedel, Abbas Ehsani-Seresht, Saeed Mansouri

Abstract: Contact modeling plays a central role in motion planning, simulation, and control of legged robots, as legged locomotion is realized through contact. The two prevailing approaches to model the contact consider rigid and compliant premise at interaction ports. Contrary to the dynamics model of legged systems with rigid contact (without impact) which is straightforward to develop, there is no consen… ▽ More Contact modeling plays a central role in motion planning, simulation, and control of legged robots, as legged locomotion is realized through contact. The two prevailing approaches to model the contact consider rigid and compliant premise at interaction ports. Contrary to the dynamics model of legged systems with rigid contact (without impact) which is straightforward to develop, there is no consensus among researchers to employ a standard compliant contact model. Our main goal in this paper is to study the dynamics model structure of bipedal walking systems with a rigid contact and a \textit{novel} compliant contact model and to present experimental validation of both models. For the model with rigid contact, after develo** the model of the articulated bodies in flight phase without any contact with the environment, we apply the holonomic constraints at contact points and develop a constrained dynamics model of the robot in both single and double support phases. For the model with compliant contact, we propose a novel nonlinear contact model and simulate the motion of the robot using this model. In order to show the performance of the developed models, we compare obtained results from these models to the empirical measurements from bipedal walking of the human-sized humanoid robot SURENA III, which has been designed and fabricated at CAST, University of Tehran. This analysis shows the merit of both models in estimating dynamic behavior of the robot walking on a semi-rigid surface. The model with rigid contact, which is less complex and independent of the physical properties of the contacting bodies, can be employed for model-based motion optimization, analysis as well as control, while the model with compliant contact and more complexity is suitable for more realistic simulation scenarios. △ Less

Submitted 13 December, 2018; v1 submitted 19 September, 2017; originally announced September 2017.

A New Pseudo-color Technique Based on Intensity Information Protection for Passive Sensor Imagery

Authors: Mohammad Reza Khosravi, Habib Rostami, Gholam Reza Ahmadi, Suleiman Mansouri, Ahmad Keshavarz

Abstract: Remote sensing image processing is so important in geo-sciences. Images which are obtained by different types of sensors might initially be unrecognizable. To make an acceptable visual perception in the images, some pre-processing steps (for removing noises and etc) are preformed which they affect the analysis of images. There are different types of processing according to the types of remote sens… ▽ More Remote sensing image processing is so important in geo-sciences. Images which are obtained by different types of sensors might initially be unrecognizable. To make an acceptable visual perception in the images, some pre-processing steps (for removing noises and etc) are preformed which they affect the analysis of images. There are different types of processing according to the types of remote sensing images. The method that we are going to introduce in this paper is to use virtual colors to colorize the gray-scale images of satellite sensors. This approach helps us to have a better analysis on a sample single-band image which has been taken by Landsat-8 (OLI) sensor (as a multi-band sensor with natural color bands, its images' natural color can be compared to synthetic color by our approach). A good feature of this method is the original image reversibility in order to keep the suitable resolution of output images. △ Less

Submitted 8 April, 2017; originally announced April 2017.

Journal ref: International Journal of Electronics Communication and Computer Engineering, vol. 6, no. 3, pp. 324-329 (2015)

Cooperative Aerial Coverage Path Planning for Visual Inspection of Complex Infrastructures

Authors: Sina Sharif Mansouri, Christoforos Kanellakis, David Wuthier, Emil Fresk, George Nikolakopoulos

Abstract: This article addresses the problem of Cooperative Coverage Path Planning (C-CPP) for the inspection of complex infrastructures (offline 3D reconstruction) by utilizing multiple Unmanned Autonomous Vehicles (UAVs). The proposed scheme, based on a priori 3D model of the infrastructure under inspection, is able to generate multiple paths for UAVs in order to achieve a complete cooperative coverage in… ▽ More This article addresses the problem of Cooperative Coverage Path Planning (C-CPP) for the inspection of complex infrastructures (offline 3D reconstruction) by utilizing multiple Unmanned Autonomous Vehicles (UAVs). The proposed scheme, based on a priori 3D model of the infrastructure under inspection, is able to generate multiple paths for UAVs in order to achieve a complete cooperative coverage in a short time. Initially the infrastructure under inspection is being sliced by horizontal planes, which has the capability of recognizing the branches of the structure and these branches will be handled as breaking points for the path planning of the UAVs to collaboratively execute the coverage task in less time and more realistically, based on the current flying times of the UAVs. The multiple data sets collected from the coverage are merged for the offline sparse and dense 3D reconstruction of the infrastructure by utilizing SLAM and Structure from Motion approaches, with either monocular or stereo sensors. The performance of the proposed C-CPP has been experimentally evaluated in multiple indoor and realistic outdoor infrastructure inspection experiments. △ Less

Submitted 5 December, 2016; v1 submitted 16 November, 2016; originally announced November 2016.

Comments: submitted to IEEE International Conference on Robotics and Automation 2017

MRF-Based Multispectral Image Fusion Using an Adaptive Approach Based on Edge-Guided Interpolation

Authors: Mohammad Reza Khosravi, Mohammad Sharif-Yazd, Mohammad Kazem Moghimi, Ahmad Keshavarz, Habib Rostami, Suleiman Mansouri

Abstract: In interpretation of remote sensing images, it is possible that some images which are supplied by different sensors become incomprehensible. For better visual perception of these images, it is essential to operate series of pre-processing and elementary corrections and then operate a series of main processing steps for more precise analysis on the images. There are several approaches for processin… ▽ More In interpretation of remote sensing images, it is possible that some images which are supplied by different sensors become incomprehensible. For better visual perception of these images, it is essential to operate series of pre-processing and elementary corrections and then operate a series of main processing steps for more precise analysis on the images. There are several approaches for processing which are depended on the type of remote sensing images. The discussed approach in this article, i.e. image fusion, is the use of natural colors of an optical image for adding color to a grayscale satellite image which gives us the ability for better observation of the HR image of OLI sensor of Landsat-8. This process with emphasis on details of fusion technique has previously been performed; however, we are going to apply the concept of the interpolation process. In fact, we see many important software tools such as ENVI and ERDAS as the most famous remote sensing image processing tools have only classical interpolation techniques (such as bi-linear (BL) and bi-cubic/cubic convolution (CC)). Therefore, ENVI- and ERDAS-based researches in image fusion area and even other fusion researches often dont use new and better interpolators and are mainly concentrated on the fusion algorithms details for achieving a better quality, so we only focus on the interpolation impact on fusion quality in Landsat-8 multispectral images. The important feature of this approach is to use a statistical, adaptive, and edge-guided interpolation method for improving the color quality in the images in practice. Numerical simulations show selecting the suitable interpolation techniques in MRF-based images creates better quality than the classical interpolators. △ Less

Submitted 24 April, 2019; v1 submitted 28 December, 2015; originally announced December 2015.

Comments: 12 pages

Journal ref: Journal of Geographic Information System, vol. 9, no. 2, pp. 114-125 (2017)

Ring Oscillator Physical Unclonable Function with Multi Level Supply Voltages

Authors: Shohreh Sharif Mansouri, Elena Dubrova

Abstract: One of the most common types of Physical Unclonable Functions (PUFs) is the ring oscillator PUF (RO-PUF), in which the output bits are obtained by comparing the oscillation frequencies of different ring oscillators. In this paper we design a new type of ring oscillator PUF in which the different inverters composing the ring oscillators can be supplied by different voltages. The new RO-PUF can be u… ▽ More One of the most common types of Physical Unclonable Functions (PUFs) is the ring oscillator PUF (RO-PUF), in which the output bits are obtained by comparing the oscillation frequencies of different ring oscillators. In this paper we design a new type of ring oscillator PUF in which the different inverters composing the ring oscillators can be supplied by different voltages. The new RO-PUF can be used to (1) increase the maximum number of possible challenge/response pairs produced by the PUF; (2) generate a high number of bits while consuming a low area; (3) improve the reliability of the PUF in case of temperature variations. We present the basic idea of the new RO-PUF and then discuss its applications. △ Less

Submitted 17 July, 2012; originally announced July 2012.

Bounds for the Sum Capacity of Binary CDMA Systems in Presence of Near-Far Effect

Authors: P. Pad, M. H. Shafinia, S. M. Mansouri, P. Kabir, F. Marvasti

Abstract: In this paper we are going to estimate the sum capacity of a binary CDMA system in presence of the near-far effect. We model the near-far effect as a random variable that is multiplied by the users binary data before entering the noisy channel. We will find a lower bound and a conjectured upper bound for the sum capacity in this situation. All the derivations are in the asymptotic case. Simulation… ▽ More In this paper we are going to estimate the sum capacity of a binary CDMA system in presence of the near-far effect. We model the near-far effect as a random variable that is multiplied by the users binary data before entering the noisy channel. We will find a lower bound and a conjectured upper bound for the sum capacity in this situation. All the derivations are in the asymptotic case. Simulations show that especially the lower bound is very tight for typical values Eb/N0 and near-far effect. Also, we exploit our idea in conjunction with the Tanaka's formula [6] which also estimates the sum capacity of binary CDMA systems with perfect power control. △ Less

Submitted 28 March, 2010; originally announced March 2010.

An Improved Implementation of Grain

Authors: Shohreh Sharif Mansouri, Elena Dubrova

Abstract: A common approach to protect confidential information is to use a stream cipher which combines plain text bits with a pseudo-random bit sequence. Among the existing stream ciphers, Non-Linear Feedback Shift Register (NLFSR)-based ones provide the best trade-off between cryptographic security and hardware efficiency. In this paper, we show how to further improve the hardware efficiency of Grain s… ▽ More A common approach to protect confidential information is to use a stream cipher which combines plain text bits with a pseudo-random bit sequence. Among the existing stream ciphers, Non-Linear Feedback Shift Register (NLFSR)-based ones provide the best trade-off between cryptographic security and hardware efficiency. In this paper, we show how to further improve the hardware efficiency of Grain stream cipher. By transforming the NLFSR of Grain from its original Fibonacci configuration to the Galois configuration and by introducing a clock division block, we double the throughput of the 80 and 128-bit key 1bit/cycle architectures of Grain with no area penalty. △ Less

Submitted 29 October, 2009; originally announced October 2009.