-
Ultra-Lightweight Collaborative Map** for Robot Swarms
Authors:
Vlad Niculescu,
Tommaso Polonelli,
Michele Magno,
Luca Benini
Abstract:
A key requirement in robotics is the ability to simultaneously self-localize and map a previously unknown environment, relying primarily on onboard sensing and computation. Achieving fully onboard accurate simultaneous localization and map** (SLAM) is feasible for high-end robotic platforms, whereas small and inexpensive robots face challenges due to constrained hardware, therefore frequently re…
▽ More
A key requirement in robotics is the ability to simultaneously self-localize and map a previously unknown environment, relying primarily on onboard sensing and computation. Achieving fully onboard accurate simultaneous localization and map** (SLAM) is feasible for high-end robotic platforms, whereas small and inexpensive robots face challenges due to constrained hardware, therefore frequently resorting to external infrastructure for sensing and computation. The challenge is further exacerbated in swarms of robots, where coordination, scalability, and latency are crucial concerns. This work introduces a decentralized and lightweight collaborative SLAM approach that enables map** on virtually any robot, even those equipped with low-cost hardware, including miniaturized insect-size devices. Moreover, the proposed solution supports large swarm formations with the capability to coordinate hundreds of agents. To substantiate our claims, we have successfully implemented collaborative SLAM on centimeter-size drones weighing only 46 grams. Remarkably, we achieve results comparable to high-end state-of-the-art solutions while reducing the cost, memory, and computation requirements by two orders of magnitude. Our approach is innovative in three main aspects. First, it enables onboard infrastructure-less collaborative map** with a lightweight and cost-effective solution in terms of sensing and computation. Second, we optimize the data traffic within the swarm to support hundreds of cooperative agents using standard wireless protocols such as ultra-wideband (UWB), Bluetooth, or WiFi. Last, we implement a distributed swarm coordination policy to decrease map** latency and enhance accuracy.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Low Latency Visual Inertial Odometry with On-Sensor Accelerated Optical Flow for Resource-Constrained UAVs
Authors:
Jonas Kühne,
Michele Magno,
Luca Benini
Abstract:
Visual Inertial Odometry (VIO) is the task of estimating the movement trajectory of an agent from an onboard camera stream fused with additional Inertial Measurement Unit (IMU) measurements. A crucial subtask within VIO is the tracking of features, which can be achieved through Optical Flow (OF). As the calculation of OF is a resource-demanding task in terms of computational load and memory footpr…
▽ More
Visual Inertial Odometry (VIO) is the task of estimating the movement trajectory of an agent from an onboard camera stream fused with additional Inertial Measurement Unit (IMU) measurements. A crucial subtask within VIO is the tracking of features, which can be achieved through Optical Flow (OF). As the calculation of OF is a resource-demanding task in terms of computational load and memory footprint, which needs to be executed at low latency, especially in robotic applications, OF estimation is today performed on powerful CPUs or GPUs. This restricts its use in a broad spectrum of applications where the deployment of such powerful, power-hungry processors is unfeasible due to constraints related to cost, size, and power consumption. On-sensor hardware acceleration is a promising approach to enable low latency VIO even on resource-constrained devices such as nano drones. This paper assesses the speed-up in a VIO sensor system exploiting a compact OF sensor consisting of a global shutter camera and an Application Specific Integrated Circuit (ASIC). By replacing the feature tracking logic of the VINS-Mono pipeline with data from this OF camera, we demonstrate a 49.4% reduction in latency and a 53.7% reduction of compute load of the VIO pipeline over the original VINS-Mono implementation, allowing VINS-Mono operation up to 50 FPS instead of 20 FPS on the quad-core ARM Cortex-A72 processor of a Raspberry Pi Compute Module 4.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
SliM-LLM: Salience-Driven Mixed-Precision Quantization for Large Language Models
Authors:
Wei Huang,
Haotong Qin,
Yangdong Liu,
Yawei Li,
Xianglong Liu,
Luca Benini,
Michele Magno,
Xiaojuan Qi
Abstract:
Large language models (LLMs) achieve remarkable performance in natural language understanding but require substantial computation and memory resources. Post-training quantization (PTQ) is a powerful compression technique extensively investigated in LLMs. However, existing PTQ methods are still not ideal in terms of accuracy and efficiency, especially with below 4 bit-widths. Standard PTQ methods u…
▽ More
Large language models (LLMs) achieve remarkable performance in natural language understanding but require substantial computation and memory resources. Post-training quantization (PTQ) is a powerful compression technique extensively investigated in LLMs. However, existing PTQ methods are still not ideal in terms of accuracy and efficiency, especially with below 4 bit-widths. Standard PTQ methods using group-wise quantization suffer difficulties in quantizing LLMs accurately to such low-bit, but advanced methods remaining high-precision weights element-wisely are hard to realize their theoretical hardware efficiency. This paper presents a Salience-Driven Mixed-Precision Quantization scheme for LLMs, namely SliM-LLM. The scheme exploits the salience distribution of weights to determine optimal bit-width and quantizers for accurate LLM quantization, while aligning bit-width partition to groups for compact memory usage and fast integer inference. Specifically, the proposed SliM-LLM mainly relies on two novel techniques: (1) Salience-Determined Bit Allocation utilizes the clustering characteristics of salience distribution to allocate the bit-widths of each group, increasing the accuracy of quantized LLMs and maintaining the inference efficiency; (2) Salience-Weighted Quantizer Calibration optimizes the parameters of the quantizer by considering the element-wise salience within the group, balancing the maintenance of salient information and minimization of errors. Comprehensive experiments show that SliM-LLM significantly improves the accuracy of LLMs at ultra-low bits, e.g., 2-bit LLaMA-7B achieves a 5.5-times memory-saving than original model on NVIDIA A800 GPUs, and 48% decrease of perplexity compared to the state-of-the-art gradient-free PTQ method. Moreover, SliM-LLM+, which is integrated from the extension of SliM-LLM with gradient-based quantizers, further reduces perplexity by 35.1%.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
How Good Are Low-bit Quantized LLaMA3 Models? An Empirical Study
Authors:
Wei Huang,
Xudong Ma,
Haotong Qin,
Xingyu Zheng,
Chengtao Lv,
Hong Chen,
Jie Luo,
Xiaojuan Qi,
Xianglong Liu,
Michele Magno
Abstract:
Meta's LLaMA family has become one of the most powerful open-source Large Language Model (LLM) series. Notably, LLaMA3 models have recently been released and achieve impressive performance across various with super-large scale pre-training on over 15T tokens of data. Given the wide application of low-bit quantization for LLMs in resource-limited scenarios, we explore LLaMA3's capabilities when qua…
▽ More
Meta's LLaMA family has become one of the most powerful open-source Large Language Model (LLM) series. Notably, LLaMA3 models have recently been released and achieve impressive performance across various with super-large scale pre-training on over 15T tokens of data. Given the wide application of low-bit quantization for LLMs in resource-limited scenarios, we explore LLaMA3's capabilities when quantized to low bit-width. This exploration holds the potential to unveil new insights and challenges for low-bit quantization of LLaMA3 and other forthcoming LLMs, especially in addressing performance degradation problems that suffer in LLM compression. Specifically, we evaluate the 10 existing post-training quantization and LoRA-finetuning methods of LLaMA3 on 1-8 bits and diverse datasets to comprehensively reveal LLaMA3's low-bit quantization performance. Our experiment results indicate that LLaMA3 still suffers non-negligent degradation in these scenarios, especially in ultra-low bit-width. This highlights the significant performance gap under low bit-width that needs to be bridged in future developments. We expect that this empirical study will prove valuable in advancing future models, pushing the LLMs to lower bit-width with higher accuracy for being practical. Our project is released on https://github.com/Macaronlin/LLaMA3-Quantization and quantized LLaMA3 models are released in https://huggingface.co/LLMQ.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
BatDeck: Advancing Nano-drone Navigation with Low-power Ultrasound-based Obstacle Avoidance
Authors:
Hanna Müller,
Victor Kartsch,
Michele Magno,
Luca Benini
Abstract:
Nano-drones, distinguished by their agility, minimal weight, and cost-effectiveness, are particularly well-suited for exploration in confined, cluttered and narrow spaces. Recognizing transparent, highly reflective or absorbing materials, such as glass and metallic surfaces is challenging, as classical sensors, such as cameras or laser rangers, often do not detect them. Inspired by bats, which can…
▽ More
Nano-drones, distinguished by their agility, minimal weight, and cost-effectiveness, are particularly well-suited for exploration in confined, cluttered and narrow spaces. Recognizing transparent, highly reflective or absorbing materials, such as glass and metallic surfaces is challenging, as classical sensors, such as cameras or laser rangers, often do not detect them. Inspired by bats, which can fly at high speeds in complete darkness with the help of ultrasound, this paper introduces \textit{BatDeck}, a pioneering sensor-deck employing a lightweight and low-power ultrasonic sensor for nano-drone autonomous navigation. This paper first provides insights about sensor characteristics, highlighting the influence of motor noise on the ultrasound readings, then it introduces the results of extensive experimental tests for obstacle avoidance (OA) in a diverse environment. Results show that \textit{BatDeck} allows exploration for a flight time of 8 minutes while covering 136m on average before crash in a challenging environment with transparent and reflective obstacles, proving the effectiveness of ultrasonic sensors for OA on nano-drones.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
CR3DT: Camera-RADAR Fusion for 3D Detection and Tracking
Authors:
Nicolas Baumann,
Michael Baumgartner,
Edoardo Ghignone,
Jonas Kühne,
Tobias Fischer,
Yung-Hsu Yang,
Marc Pollefeys,
Michele Magno
Abstract:
Accurate detection and tracking of surrounding objects is essential to enable self-driving vehicles. While Light Detection and Ranging (LiDAR) sensors have set the benchmark for high performance, the appeal of camera-only solutions lies in their cost-effectiveness. Notably, despite the prevalent use of Radio Detection and Ranging (RADAR) sensors in automotive systems, their potential in 3D detecti…
▽ More
Accurate detection and tracking of surrounding objects is essential to enable self-driving vehicles. While Light Detection and Ranging (LiDAR) sensors have set the benchmark for high performance, the appeal of camera-only solutions lies in their cost-effectiveness. Notably, despite the prevalent use of Radio Detection and Ranging (RADAR) sensors in automotive systems, their potential in 3D detection and tracking has been largely disregarded due to data sparsity and measurement noise. As a recent development, the combination of RADARs and cameras is emerging as a promising solution. This paper presents Camera-RADAR 3D Detection and Tracking (CR3DT), a camera-RADAR fusion model for 3D object detection, and Multi-Object Tracking (MOT). Building upon the foundations of the State-of-the-Art (SotA) camera-only BEVDet architecture, CR3DT demonstrates substantial improvements in both detection and tracking capabilities, by incorporating the spatial and velocity information of the RADAR sensor. Experimental results demonstrate an absolute improvement in detection performance of 5.3% in mean Average Precision (mAP) and a 14.9% increase in Average Multi-Object Tracking Accuracy (AMOTA) on the nuScenes dataset when leveraging both modalities. CR3DT bridges the gap between high-performance and cost-effective perception systems in autonomous driving, by capitalizing on the ubiquitous presence of RADAR in automotive applications.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Towards Real-Time Fast Unmanned Aerial Vehicle Detection Using Dynamic Vision Sensors
Authors:
Jakub Mandula,
Jonas Kühne,
Luca Pascarella,
Michele Magno
Abstract:
Unmanned Aerial Vehicles (UAVs) are gaining popularity in civil and military applications. However, uncontrolled access to restricted areas threatens privacy and security. Thus, prevention and detection of UAVs are pivotal to guarantee confidentiality and safety. Although active scanning, mainly based on radars, is one of the most accurate technologies, it can be expensive and less versatile than…
▽ More
Unmanned Aerial Vehicles (UAVs) are gaining popularity in civil and military applications. However, uncontrolled access to restricted areas threatens privacy and security. Thus, prevention and detection of UAVs are pivotal to guarantee confidentiality and safety. Although active scanning, mainly based on radars, is one of the most accurate technologies, it can be expensive and less versatile than passive inspections, e.g., object recognition. Dynamic vision sensors (DVS) are bio-inspired event-based vision models that leverage timestamped pixel-level brightness changes in fast-moving scenes that adapt well to low-latency object detection. This paper presents F-UAV-D (Fast Unmanned Aerial Vehicle Detector), an embedded system that enables fast-moving drone detection. In particular, we propose a setup to exploit DVS as an alternative to RGB cameras in a real-time and low-power configuration. Our approach leverages the high-dynamic range (HDR) and background suppression of DVS and, when trained with various fast-moving drones, outperforms RGB input in suboptimal ambient conditions such as low illumination and fast-moving scenes. Our results show that F-UAV-D can (i) detect drones by using less than <15 W on average and (ii) perform real-time inference (i.e., <50 ms) by leveraging the CPU and GPU nodes of our edge computer.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
ForzaETH Race Stack -- Scaled Autonomous Head-to-Head Racing on Fully Commercial off-the-Shelf Hardware
Authors:
Nicolas Baumann,
Edoardo Ghignone,
Jonas Kühne,
Niklas Bastuck,
Jonathan Becker,
Nadine Imholz,
Tobias Kränzlin,
Tian Yi Lim,
Michael Lötscher,
Luca Schwarzenbach,
Luca Tognoni,
Christian Vogt,
Andrea Carron,
Michele Magno
Abstract:
Autonomous racing in robotics combines high-speed dynamics with the necessity for reliability and real-time decision-making. While such racing pushes software and hardware to their limits, many existing full-system solutions necessitate complex, custom hardware and software, and usually focus on Time-Trials rather than full unrestricted Head-to-Head racing, due to financial and safety constraints.…
▽ More
Autonomous racing in robotics combines high-speed dynamics with the necessity for reliability and real-time decision-making. While such racing pushes software and hardware to their limits, many existing full-system solutions necessitate complex, custom hardware and software, and usually focus on Time-Trials rather than full unrestricted Head-to-Head racing, due to financial and safety constraints. This limits their reproducibility, making advancements and replication feasible mostly for well-resourced laboratories with comprehensive expertise in mechanical, electrical, and robotics fields. Researchers interested in the autonomy domain but with only partial experience in one of these fields, need to spend significant time with familiarization and integration. The ForzaETH Race Stack addresses this gap by providing an autonomous racing software platform designed for F1TENTH, a 1:10 scaled Head-to-Head autonomous racing competition, which simplifies replication by using commercial off-the-shelf hardware. This approach enhances the competitive aspect of autonomous racing and provides an accessible platform for research and development in the field. The ForzaETH Race Stack is designed with modularity and operational ease of use in mind, allowing customization and adaptability to various environmental conditions, such as track friction and layout. Capable of handling both Time-Trials and Head-to-Head racing, the stack has demonstrated its effectiveness, robustness, and adaptability in the field by winning the official F1TENTH international competition multiple times.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
CycloWatt: An Affordable, TinyML-enhanced IoT Device Revolutionizing Cycling Power Metrics
Authors:
Victor Luder,
Sizhen Bian,
Michele Magno
Abstract:
Cycling power measurement is an indispensable metric with profound implications for cyclists' performance and fitness levels. It empowers riders with real-time feedback, supports precise training regimen planning, mitigates injury risks, and enhances muscular development. Despite these advantages, the widespread adoption of cycling power meters has been hampered by their prohibitive cost and deplo…
▽ More
Cycling power measurement is an indispensable metric with profound implications for cyclists' performance and fitness levels. It empowers riders with real-time feedback, supports precise training regimen planning, mitigates injury risks, and enhances muscular development. Despite these advantages, the widespread adoption of cycling power meters has been hampered by their prohibitive cost and deployment complexity. This paper pioneers a groundbreaking approach to power measurement in cycling, prioritizing affordability and user-friendliness. To achieve this goal, we introduce a cutting-edge Internet of Things (IoT) device that seamlessly integrates force signals with inertial sensor data while leveraging the power of edge machine learning techniques. In-field experimental evaluations demonstrate that our prototype can estimate power with remarkable accuracy, boasting a Mean Absolute Error (MAE) of only 12.29 Watts (4.1\%). Notably, our design emphasizes energy efficiency, operating in a low-power mode that consumes a mere 50 milliwatts and offers an exceptional battery life of up to 25.8 hours in always-on active mode. With an ultra-low latency of 4.33 milliseconds for data processing and inference, our system ensures real-time power estimation during cycling activities. Incorporating IoT concepts and devices, this paper marks a significant milestone in develo** cost-effective and accurate cycling power meters.
△ Less
Submitted 27 February, 2024;
originally announced March 2024.
-
Accurate LoRA-Finetuning Quantization of LLMs via Information Retention
Authors:
Haotong Qin,
Xudong Ma,
Xingyu Zheng,
Xiaoyang Li,
Yang Zhang,
Shouda Liu,
Jie Luo,
Xianglong Liu,
Michele Magno
Abstract:
The LoRA-finetuning quantization of LLMs has been extensively studied to obtain accurate yet compact LLMs for deployment on resource-constrained hardware. However, existing methods cause the quantized LLM to severely degrade and even fail to benefit from the finetuning of LoRA. This paper proposes a novel IR-QLoRA for pushing quantized LLMs with LoRA to be highly accurate through information reten…
▽ More
The LoRA-finetuning quantization of LLMs has been extensively studied to obtain accurate yet compact LLMs for deployment on resource-constrained hardware. However, existing methods cause the quantized LLM to severely degrade and even fail to benefit from the finetuning of LoRA. This paper proposes a novel IR-QLoRA for pushing quantized LLMs with LoRA to be highly accurate through information retention. The proposed IR-QLoRA mainly relies on two technologies derived from the perspective of unified information: (1) statistics-based Information Calibration Quantization allows the quantized parameters of LLM to retain original information accurately; (2) finetuning-based Information Elastic Connection makes LoRA utilizes elastic representation transformation with diverse information. Comprehensive experiments show that IR-QLoRA can significantly improve accuracy across LLaMA and LLaMA2 families under 2-4 bit-widths, e.g., 4- bit LLaMA-7B achieves 1.4% improvement on MMLU compared with the state-of-the-art methods. The significant performance gain requires only a tiny 0.31% additional time consumption, revealing the satisfactory efficiency of our IR-QLoRA. We highlight that IR-QLoRA enjoys excellent versatility, compatible with various frameworks (e.g., NormalFloat and Integer quantization) and brings general accuracy gains. The code is available at https://github.com/htqin/ir-qlora.
△ Less
Submitted 27 May, 2024; v1 submitted 8 February, 2024;
originally announced February 2024.
-
BiLLM: Pushing the Limit of Post-Training Quantization for LLMs
Authors:
Wei Huang,
Yangdong Liu,
Haotong Qin,
Ying Li,
Shiming Zhang,
Xianglong Liu,
Michele Magno,
Xiaojuan Qi
Abstract:
Pretrained large language models (LLMs) exhibit exceptional general language processing capabilities but come with significant demands on memory and computational resources. As a powerful compression technology, binarization can extremely reduce model weights to a mere 1 bit, lowering the expensive computation and memory requirements. However, existing quantization techniques fall short of maintai…
▽ More
Pretrained large language models (LLMs) exhibit exceptional general language processing capabilities but come with significant demands on memory and computational resources. As a powerful compression technology, binarization can extremely reduce model weights to a mere 1 bit, lowering the expensive computation and memory requirements. However, existing quantization techniques fall short of maintaining LLM performance under ultra-low bit-widths. In response to this challenge, we present BiLLM, a groundbreaking 1-bit post-training quantization scheme tailored for pretrained LLMs. Based on the weight distribution of LLMs, BiLLM first identifies and structurally selects salient weights, and minimizes the compression loss through an effective binary residual approximation strategy. Moreover, considering the bell-shaped distribution of the non-salient weights, we propose an optimal splitting search to group and binarize them accurately. BiLLM achieving for the first time high-accuracy inference (e.g. 8.41 perplexity on LLaMA2-70B) with only 1.08-bit weights across various LLMs families and evaluation metrics, outperforms SOTA quantization methods of LLM by significant margins. Moreover, BiLLM enables the binarization process of the LLM with 7 billion weights within 0.5 hours on a single GPU, demonstrating satisfactory time efficiency. Our code is available at https://github.com/Aaronhuang-778/BiLLM.
△ Less
Submitted 15 May, 2024; v1 submitted 6 February, 2024;
originally announced February 2024.
-
Robustness Evaluation of Localization Techniques for Autonomous Racing
Authors:
Tian Yi Lim,
Edoardo Ghignone,
Nicolas Baumann,
Michele Magno
Abstract:
This work introduces SynPF, an MCL-based algorithm tailored for high-speed racing environments. Benchmarked against Cartographer, a state-of-the-art pose-graph SLAM algorithm, SynPF leverages synergies from previous particle-filtering methods and synthesizes them for the high-performance racing domain. Our extensive in-field evaluations reveal that while Cartographer excels under nominal condition…
▽ More
This work introduces SynPF, an MCL-based algorithm tailored for high-speed racing environments. Benchmarked against Cartographer, a state-of-the-art pose-graph SLAM algorithm, SynPF leverages synergies from previous particle-filtering methods and synthesizes them for the high-performance racing domain. Our extensive in-field evaluations reveal that while Cartographer excels under nominal conditions, it struggles when subjected to wheel-slip, a common phenomenon in a racing scenario due to varying grip levels and aggressive driving behaviour. Conversely, SynPF demonstrates robustness in these challenging conditions and a low-latency computation time of 1.25 ms on on-board computers without a GPU. Using the F1TENTH platform, a 1:10 scaled autonomous racing vehicle, this work not only highlights the vulnerabilities of existing algorithms in high-speed scenarios, tested up until 7.6 m/s, but also emphasizes the potential of SynPF as a viable alternative, especially in deteriorating odometry conditions.
△ Less
Submitted 26 March, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Body-Area Capacitive or Electric Field Sensing for Human Activity Recognition and Human-Computer Interaction: A Comprehensive Survey
Authors:
Sizhen Bian,
Mengxi Liu,
Bo Zhou,
Paul Lukowicz,
Michele Magno
Abstract:
Due to the fact that roughly sixty percent of the human body is essentially composed of water, the human body is inherently a conductive object, being able to, firstly, form an inherent electric field from the body to the surroundings and secondly, deform the distribution of an existing electric field near the body. Body-area capacitive sensing, also called body-area electric field sensing, is bec…
▽ More
Due to the fact that roughly sixty percent of the human body is essentially composed of water, the human body is inherently a conductive object, being able to, firstly, form an inherent electric field from the body to the surroundings and secondly, deform the distribution of an existing electric field near the body. Body-area capacitive sensing, also called body-area electric field sensing, is becoming a promising alternative for wearable devices to accomplish certain tasks in human activity recognition and human-computer interaction. Over the last decade, researchers have explored plentiful novel sensing systems backed by the body-area electric field. On the other hand, despite the pervasive exploration of the body-area electric field, a comprehensive survey does not exist for an enlightening guideline. Moreover, the various hardware implementations, applied algorithms, and targeted applications result in a challenging task to achieve a systematic overview of the subject. This paper aims to fill in the gap by comprehensively summarizing the existing works on body-area capacitive sensing so that researchers can have a better view of the current exploration status. To this end, we first sorted the explorations into three domains according to the involved body forms: body-part electric field, whole-body electric field, and body-to-body electric field, and enumerated the state-of-art works in the domains with a detailed survey of the backed sensing tricks and targeted applications. We then summarized the three types of sensing frontends in circuit design, which is the most critical part in body-area capacitive sensing, and analyzed the data processing pipeline categorized into three kinds of approaches. Finally, we described the challenges and outlooks of body-area electric sensing.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Q-Segment: Segmenting Images In-Sensor for Vessel-Based Medical Diagnosis
Authors:
Pietro Bonazzi,
Yawei Li,
Sizhen Bian,
Michele Magno
Abstract:
This paper addresses the growing interest in deploying deep learning models directly in-sensor. We present "Q-Segment", a quantized real-time segmentation algorithm, and conduct a comprehensive evaluation on a low-power edge vision platform with an in-sensors processor, the Sony IMX500. One of the main goals of the model is to achieve end-to-end image segmentation for vessel-based medical diagnosi…
▽ More
This paper addresses the growing interest in deploying deep learning models directly in-sensor. We present "Q-Segment", a quantized real-time segmentation algorithm, and conduct a comprehensive evaluation on a low-power edge vision platform with an in-sensors processor, the Sony IMX500. One of the main goals of the model is to achieve end-to-end image segmentation for vessel-based medical diagnosis. Deployed on the IMX500 platform, Q-Segment achieves ultra-low inference time in-sensor only 0.23 ms and power consumption of only 72mW. We compare the proposed network with state-of-the-art models, both float and quantized, demonstrating that the proposed solution outperforms existing networks on various platforms in computing efficiency, e.g., by a factor of 75x compared to ERFNet. The network employs an encoder-decoder structure with skip connections, and results in a binary accuracy of 97.25% and an Area Under the Receiver Operating Characteristic Curve (AUC) of 96.97% on the CHASE dataset. We also present a comparison of the IMX500 processing core with the Sony Spresense, a low-power multi-core ARM Cortex-M microcontroller, and a single-core ARM Cortex-M4 showing that it can achieve in-sensor processing with end-to-end low latency (17 ms) and power concumption (254mW). This research contributes valuable insights into edge-based image segmentation, laying the foundation for efficient algorithms tailored to low-power environments.
△ Less
Submitted 4 March, 2024; v1 submitted 15 December, 2023;
originally announced December 2023.
-
Retina : Low-Power Eye Tracking with Event Camera and Spiking Hardware
Authors:
Pietro Bonazzi,
Sizhen Bian,
Giovanni Lippolis,
Yawei Li,
Sadique Sheik,
Michele Magno
Abstract:
This paper introduces a neuromorphic methodology for eye tracking, harnessing pure event data captured by a Dynamic Vision Sensor (DVS) camera. The framework integrates a directly trained Spiking Neuron Network (SNN) regression model and leverages a state-of-the-art low power edge neuromorphic processor - Speck, collectively aiming to advance the precision and efficiency of eye-tracking systems. F…
▽ More
This paper introduces a neuromorphic methodology for eye tracking, harnessing pure event data captured by a Dynamic Vision Sensor (DVS) camera. The framework integrates a directly trained Spiking Neuron Network (SNN) regression model and leverages a state-of-the-art low power edge neuromorphic processor - Speck, collectively aiming to advance the precision and efficiency of eye-tracking systems. First, we introduce a representative event-based eye-tracking dataset, "Ini-30", which was collected with two glass-mounted DVS cameras from thirty volunteers. Then,a SNN model, based on Integrate And Fire (IAF) neurons, named "Retina", is described , featuring only 64k parameters (6.63x fewer than the latest) and achieving pupil tracking error of only 3.24 pixels in a 64x64 DVS input. The continous regression output is obtained by means of convolution using a non-spiking temporal 1D filter slided across the output spiking layer. Finally, we evaluate Retina on the neuromorphic processor, showing an end-to-end power between 2.89-4.8 mW and a latency of 5.57-8.01 mS dependent on the time window. We also benchmark our model against the latest event-based eye-tracking method, "3ET", which was built upon event frames. Results show that Retina achieves superior precision with 1.24px less pupil centroid error and reduced computational complexity with 35 times fewer MAC operations. We hope this work will open avenues for further investigation of close-loop neuromorphic solutions and true event-based training pursuing edge performance.
△ Less
Submitted 17 April, 2024; v1 submitted 1 December, 2023;
originally announced December 2023.
-
Enhancing Lightweight Neural Networks for Small Object Detection in IoT Applications
Authors:
Liam Boyle,
Nicolas Baumann,
Seonyeong Heo,
Michele Magno
Abstract:
Advances in lightweight neural networks have revolutionized computer vision in a broad range of IoT applications, encompassing remote monitoring and process automation. However, the detection of small objects, which is crucial for many of these applications, remains an underexplored area in current computer vision research, particularly for embedded devices. To address this gap, the paper proposes…
▽ More
Advances in lightweight neural networks have revolutionized computer vision in a broad range of IoT applications, encompassing remote monitoring and process automation. However, the detection of small objects, which is crucial for many of these applications, remains an underexplored area in current computer vision research, particularly for embedded devices. To address this gap, the paper proposes a novel adaptive tiling method that can be used on top of any existing object detector including the popular FOMO network for object detection on microcontrollers. Our experimental results show that the proposed tiling method can boost the F1-score by up to 225% while reducing the average object count error by up to 76%. Furthermore, the findings of this work suggest that using a soft F1 loss over the popular binary cross-entropy loss can significantly reduce the negative impact of imbalanced data. Finally, we validate our approach by conducting experiments on the Sony Spresense microcontroller, showcasing the proposed method's ability to strike a balance between detection performance, low latency, and minimal memory consumption.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Ultra-Efficient On-Device Object Detection on AI-Integrated Smart Glasses with TinyissimoYOLO
Authors:
Julian Moosmann,
Pietro Bonazzi,
Yawei Li,
Sizhen Bian,
Philipp Mayer,
Luca Benini,
Michele Magno
Abstract:
Smart glasses are rapidly gaining advanced functionality thanks to cutting-edge computing technologies, accelerated hardware architectures, and tiny AI algorithms. Integrating AI into smart glasses featuring a small form factor and limited battery capacity is still challenging when targeting full-day usage for a satisfactory user experience. This paper illustrates the design and implementation of…
▽ More
Smart glasses are rapidly gaining advanced functionality thanks to cutting-edge computing technologies, accelerated hardware architectures, and tiny AI algorithms. Integrating AI into smart glasses featuring a small form factor and limited battery capacity is still challenging when targeting full-day usage for a satisfactory user experience. This paper illustrates the design and implementation of tiny machine-learning algorithms exploiting novel low-power processors to enable prolonged continuous operation in smart glasses. We explore the energy- and latency-efficient of smart glasses in the case of real-time object detection. To this goal, we designed a smart glasses prototype as a research platform featuring two microcontrollers, including a novel milliwatt-power RISC-V parallel processor with a hardware accelerator for visual AI, and a Bluetooth low-power module for communication. The smart glasses integrate power cycling mechanisms, including image and audio sensing interfaces. Furthermore, we developed a family of novel tiny deep-learning models based on YOLO with sub-million parameters customized for microcontroller-based inference dubbed TinyissimoYOLO v1.3, v5, and v8, aiming at benchmarking object detection with smart glasses for energy and latency. Evaluations on the prototype of the smart glasses demonstrate TinyissimoYOLO's 17ms inference latency and 1.59mJ energy consumption per inference while ensuring acceptable detection accuracy. Further evaluation reveals an end-to-end latency from image capturing to the algorithm's prediction of 56ms or equivalently 18 fps, with a total power consumption of 62.9mW, equivalent to a 9.3 hours of continuous run time on a 154mAh battery. These results outperform MCUNet (TinyNAS+TinyEngine), which runs a simpler task (image classification) at just 7.3 fps per second.
△ Less
Submitted 3 November, 2023; v1 submitted 2 November, 2023;
originally announced November 2023.
-
Design and Implementation of an RSSI-Based Bluetooth Low Energy Indoor Localization System
Authors:
Silvano Cortesi,
Marc Dreher,
Michele Magno
Abstract:
Indoor Positioning System (IPS) is a crucial technology that enables medical staff and hospital managements to accurately locate and track persons or assets inside the medical buildings. Among other technologies, Bluetooth Low Energy (BLE) can be exploited for achieving an energy-efficient and low-cost solution. This work presents the design and implementation of an received signal strength indica…
▽ More
Indoor Positioning System (IPS) is a crucial technology that enables medical staff and hospital managements to accurately locate and track persons or assets inside the medical buildings. Among other technologies, Bluetooth Low Energy (BLE) can be exploited for achieving an energy-efficient and low-cost solution. This work presents the design and implementation of an received signal strength indicator (RSSI)-based indoor localization system. The paper shows the implementation of a low complex weighted k-Nearest Neighbors algorithm that processes raw RSSI data from connection-less iBeacon's. The designed hardware and firmware are implemented around the low-power and low-cost nRF52832 from Nordic Semiconductor. Experimental evaluation with the real-time data processing has been evaluated and presented in a 7.2 m by 7.2 m room with furniture and 5 beacon nodes. The experimental results show an average error of only 0.72 m in realistic conditions. Finally, the overall power consumption of the fixed beacon with a periodic advertisement of 100 ms is only 50 uA at 3 V, which leads to a long-lasting solution of over one year with a 500 mAh coin battery.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Latency and Power Consumption in 2.4 GHz IoT Wireless Mesh Nodes: An Experimental Evaluation of Bluetooth Mesh and Wirepas Mesh
Authors:
Silvano Cortesi,
Christian Vogt,
Elio Reinschmidt,
Michele Magno
Abstract:
The rapid growth of the Internet of Things paradigm is pushing the need to connect billions of batteryoperated devices to the internet and among them. To address this need, the introduction of energy-efficient wireless mesh networks based on Bluetooth provides an effective solution. This paper proposes a testbed setup to accurately evaluate and compare the standard Bluetooth Mesh 5.0 and the emerg…
▽ More
The rapid growth of the Internet of Things paradigm is pushing the need to connect billions of batteryoperated devices to the internet and among them. To address this need, the introduction of energy-efficient wireless mesh networks based on Bluetooth provides an effective solution. This paper proposes a testbed setup to accurately evaluate and compare the standard Bluetooth Mesh 5.0 and the emerging energy-efficient Wirepas protocol that promises better performance. The paper presents the evaluation in terms of power consumption, energy efficiency, and transmission latency which are the most crucial features, in a controlled and reproducible test setup consisting of 10 nodes. Experimental results demonstrated that Wirepas has a median latency of 2.83 ms in Low-Latency mode respectively around 2 s in the Low-Energy mode. The corresponding power consumption is 6.2 mA in Low-Latency mode and 38.9 uA in Low-Energy mode. For Bluetooth Mesh the median latency is 4.54 ms with a power consumption of 6.2 mA at 3.3 V. Based on this comparison, conclusions about the advantages and disadvantages of both technologies can be drawn.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Fully Onboard Low-Power Localization with Semantic Sensor Fusion on a Nano-UAV using Floor Plans
Authors:
Nicky Zimmerman,
Hanna Müller,
Michele Magno,
Luca Benini
Abstract:
Nano-sized unmanned aerial vehicles (UAVs) are well-fit for indoor applications and for close proximity to humans. To enable autonomy, the nano-UAV must be able to self-localize in its operating environment. This is a particularly-challenging task due to the limited sensing and compute resources on board. This work presents an online and onboard approach for localization in floor plans annotated w…
▽ More
Nano-sized unmanned aerial vehicles (UAVs) are well-fit for indoor applications and for close proximity to humans. To enable autonomy, the nano-UAV must be able to self-localize in its operating environment. This is a particularly-challenging task due to the limited sensing and compute resources on board. This work presents an online and onboard approach for localization in floor plans annotated with semantic information. Unlike sensor-based maps, floor plans are readily-available, and do not increase the cost and time of deployment. To overcome the difficulty of localizing in sparse maps, the proposed approach fuses geometric information from miniaturized time-of-flight sensors and semantic cues. The semantic information is extracted from images by deploying a state-of-the-art object detection model on a high-performance multi-core microcontroller onboard the drone, consuming only 2.5mJ per frame and executing in 38ms. In our evaluation, we globally localize in a real-world office environment, achieving 90% success rate. We also release an open-source implementation of our work.
△ Less
Submitted 5 February, 2024; v1 submitted 19 October, 2023;
originally announced October 2023.
-
Skilog: A Smart Sensor System for Performance Analysis and Biofeedback in Ski Jum**
Authors:
Lukas Schulthess,
Thorir Mar Ingolfsson,
Marc Nölke,
Michele Magno,
Luca Benini,
Christoph Leitner
Abstract:
In ski jum**, low repetition rates of jumps limit the effectiveness of training. Thus, increasing learning rate within every single jump is key to success. A critical element of athlete training is motor learning, which has been shown to be accelerated by feedback methods. In particular, a fine-grained control of the center of gravity in the in-run is essential. This is because the actual takeof…
▽ More
In ski jum**, low repetition rates of jumps limit the effectiveness of training. Thus, increasing learning rate within every single jump is key to success. A critical element of athlete training is motor learning, which has been shown to be accelerated by feedback methods. In particular, a fine-grained control of the center of gravity in the in-run is essential. This is because the actual takeoff occurs within a blink of an eye ($\sim$300ms), thus any unbalanced body posture during the in-run will affect flight. This paper presents a smart, compact, and energy-efficient wireless sensor system for real-time performance analysis and biofeedback during ski jum**. The system operates by gauging foot pressures at three distinct points on the insoles of the ski boot at 100Hz. Foot pressure data can either be directly sent to coaches to improve their feedback, or fed into a ML model to give athletes instantaneous in-action feedback using a vibration motor in the ski boot. In the biofeedback scenario, foot pressures act as input variables for an optimized XGBoost model. We achieve a high predictive accuracy of 92.7% for center of mass predictions (dorsal shift, neutral stand, ventral shift). Subsequently, we parallelized and fine-tuned our XGBoost model for a RISC-V based low power parallel processor (GAP9), based on the PULP architecture. We demonstrate real-time detection and feedback (0.0109ms/inference) using our on-chip deployment. The proposed smart system is unobtrusive with a slim form factor (13mm baseboard, 3.2mm antenna) and a lightweight build (26g). Power consumption analysis reveals that the system's energy-efficient design enables sustained operation over multiple days (up to 300 hours) without requiring recharge.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
NanoSLAM: Enabling Fully Onboard SLAM for Tiny Robots
Authors:
Vlad Niculescu,
Tommaso Polonelli,
Michele Magno,
Luca Benini
Abstract:
Perceiving and map** the surroundings are essential for enabling autonomous navigation in any robotic platform. The algorithm class that enables accurate map** while correcting the odometry errors present in most robotics systems is Simultaneous Localization and Map** (SLAM). Today, fully onboard map** is only achievable on robotic platforms that can host high-wattage processors, mainly du…
▽ More
Perceiving and map** the surroundings are essential for enabling autonomous navigation in any robotic platform. The algorithm class that enables accurate map** while correcting the odometry errors present in most robotics systems is Simultaneous Localization and Map** (SLAM). Today, fully onboard map** is only achievable on robotic platforms that can host high-wattage processors, mainly due to the significant computational load and memory demands required for executing SLAM algorithms. For this reason, pocket-size hardware-constrained robots offload the execution of SLAM to external infrastructures. To address the challenge of enabling SLAM algorithms on resource-constrained processors, this paper proposes NanoSLAM, a lightweight and optimized end-to-end SLAM approach specifically designed to operate on centimeter-size robots at a power budget of only 87.9 mW. We demonstrate the map** capabilities in real-world scenarios and deploy NanoSLAM on a nano-drone weighing 44 g and equipped with a novel commercial RISC-V low-power parallel processor called GAP9. The algorithm is designed to leverage the parallel capabilities of the RISC-V processing cores and enables map** of a general environment with an accuracy of 4.5 cm and an end-to-end execution time of less than 250 ms.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Assessing the Robustness of LiDAR, Radar and Depth Cameras Against Ill-Reflecting Surfaces in Autonomous Vehicles: An Experimental Study
Authors:
Michael Loetscher,
Nicolas Baumann,
Edoardo Ghignone,
Andrea Ronco,
Michele Magno
Abstract:
Range-measuring sensors play a critical role in autonomous driving systems. While LiDAR technology has been dominant, its vulnerability to adverse weather conditions is well-documented. This paper focuses on secondary adverse conditions and the implications of ill-reflective surfaces on range measurement sensors. We assess the influence of this condition on the three primary ranging modalities use…
▽ More
Range-measuring sensors play a critical role in autonomous driving systems. While LiDAR technology has been dominant, its vulnerability to adverse weather conditions is well-documented. This paper focuses on secondary adverse conditions and the implications of ill-reflective surfaces on range measurement sensors. We assess the influence of this condition on the three primary ranging modalities used in autonomous mobile robotics: LiDAR, RADAR, and Depth-Camera. Based on accurate experimental evaluation the papers findings reveal that under ill-reflectivity, LiDAR ranging performance drops significantly to 33% of its nominal operating conditions, whereas RADAR and Depth-Cameras maintain up to 100% of their nominal distance ranging capabilities. Additionally, we demonstrate on a 1:10 scaled autonomous racecar how ill-reflectivity adversely impacts downstream robotics tasks, highlighting the necessity for robust range sensing in autonomous driving.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Fully Onboard SLAM for Distributed Map** with a Swarm of Nano-Drones
Authors:
Carl Friess,
Vlad Niculescu,
Tommaso Polonelli,
Michele Magno,
Luca Benini
Abstract:
The use of Unmanned Aerial Vehicles (UAVs) is rapidly increasing in applications ranging from surveillance and first-aid missions to industrial automation involving cooperation with other machines or humans. To maximize area coverage and reduce mission latency, swarms of collaborating drones have become a significant research direction. However, this approach requires open challenges in positionin…
▽ More
The use of Unmanned Aerial Vehicles (UAVs) is rapidly increasing in applications ranging from surveillance and first-aid missions to industrial automation involving cooperation with other machines or humans. To maximize area coverage and reduce mission latency, swarms of collaborating drones have become a significant research direction. However, this approach requires open challenges in positioning, map**, and communications to be addressed. This work describes a distributed map** system based on a swarm of nano-UAVs, characterized by a limited payload of 35 g and tightly constrained on-board sensing and computing capabilities. Each nano-UAV is equipped with four 64-pixel depth sensors that measure the relative distance to obstacles in four directions. The proposed system merges the information from the swarm and generates a coherent grid map without relying on any external infrastructure. The data fusion is performed using the iterative closest point algorithm and a graph-based simultaneous localization and map** algorithm, running entirely on-board the UAV's low-power ARM Cortex-M microcontroller with just 192 kB of SRAM memory. Field results gathered in three different mazes from a swarm of up to 4 nano-UAVs prove a map** accuracy of 12 cm and demonstrate that the map** time is inversely proportional to the number of agents. The proposed framework scales linearly in terms of communication bandwidth and on-board computational complexity, supporting communication between up to 20 nano-UAVs and map** of areas up to 180 m2 with the chosen configuration requiring only 50 kB of memory.
△ Less
Submitted 7 September, 2023;
originally announced September 2023.
-
In-Ear-Voice: Towards Milli-Watt Audio Enhancement With Bone-Conduction Microphones for In-Ear Sensing Platforms
Authors:
Philipp Schilk,
Niccolò Polvani,
Andrea Ronco,
Milos Cernak,
Michele Magno
Abstract:
The recent ubiquitous adoption of remote conferencing has been accompanied by omnipresent frustration with distorted or otherwise unclear voice communication. Audio enhancement can compensate for low-quality input signals from, for example, small true wireless earbuds, by applying noise suppression techniques. Such processing relies on voice activity detection (VAD) with low latency and the added…
▽ More
The recent ubiquitous adoption of remote conferencing has been accompanied by omnipresent frustration with distorted or otherwise unclear voice communication. Audio enhancement can compensate for low-quality input signals from, for example, small true wireless earbuds, by applying noise suppression techniques. Such processing relies on voice activity detection (VAD) with low latency and the added capability of discriminating the wearer's voice from others - a task of significant computational complexity. The tight energy budget of devices as small as modern earphones, however, requires any system attempting to tackle this problem to do so with minimal power and processing overhead, while not relying on speaker-specific voice samples and training due to usability concerns.
This paper presents the design and implementation of a custom research platform for low-power wireless earbuds based on novel, commercial, MEMS bone-conduction microphones. Such microphones can record the wearer's speech with much greater isolation, enabling personalized voice activity detection and further audio enhancement applications. Furthermore, the paper accurately evaluates a proposed low-power personalized speech detection algorithm based on bone conduction data and a recurrent neural network running on the implemented research platform. This algorithm is compared to an approach based on traditional microphone input. The performance of the bone conduction system, achieving detection of speech within 12.8ms at an accuracy of 95\% is evaluated. Different SoC choices are contrasted, with the final implementation based on the cutting-edge Ambiq Apollo 4 Blue SoC achieving 2.64mW average power consumption at 14uJ per inference, reaching 43h of battery life on a miniature 32mAh li-ion cell and without duty cycling.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Towards Robust Velocity and Position Estimation of Opponents for Autonomous Racing Using Low-Power Radar
Authors:
Andrea Ronco,
Nicolas Baumann,
Marco Giordano,
Michele Magno
Abstract:
This paper presents the design and development of an intelligent subsystem that includes a novel low-power radar sensor integrated into an autonomous racing perception pipeline to robustly estimate the position and velocity of dynamic obstacles. The proposed system, based on the Infineon BGT60TR13D radar, is evaluated in a real-world scenario with scaled race cars. The paper explores the benefits…
▽ More
This paper presents the design and development of an intelligent subsystem that includes a novel low-power radar sensor integrated into an autonomous racing perception pipeline to robustly estimate the position and velocity of dynamic obstacles. The proposed system, based on the Infineon BGT60TR13D radar, is evaluated in a real-world scenario with scaled race cars. The paper explores the benefits and limitations of using such a sensor subsystem and draws conclusions based on field-collected data. The results demonstrate a tracking error up to 0.21 +- 0.29 m in distance estimation and 0.39 +- 0.19 m/s in velocity estimation, despite the power consumption in the range of 10s of milliwatts. The presented system provides complementary information to other sensors such as LiDAR and camera, and can be used in a wide range of applications beyond autonomous racing.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Evaluating Spiking Neural Network On Neuromorphic Platform For Human Activity Recognition
Authors:
Sizhen Bian,
Michele Magno
Abstract:
Energy efficiency and low latency are crucial requirements for designing wearable AI-empowered human activity recognition systems, due to the hard constraints of battery operations and closed-loop feedback. While neural network models have been extensively compressed to match the stringent edge requirements, spiking neural networks and event-based sensing are recently emerging as promising solutio…
▽ More
Energy efficiency and low latency are crucial requirements for designing wearable AI-empowered human activity recognition systems, due to the hard constraints of battery operations and closed-loop feedback. While neural network models have been extensively compressed to match the stringent edge requirements, spiking neural networks and event-based sensing are recently emerging as promising solutions to further improve performance due to their inherent energy efficiency and capacity to process spatiotemporal data in very low latency. This work aims to evaluate the effectiveness of spiking neural networks on neuromorphic processors in human activity recognition for wearable applications. The case of workout recognition with wrist-worn wearable motion sensors is used as a study. A multi-threshold delta modulation approach is utilized for encoding the input sensor data into spike trains to move the pipeline into the event-based approach. The spikes trains are then fed to a spiking neural network with direct-event training, and the trained model is deployed on the research neuromorphic platform from Intel, Loihi, to evaluate energy and latency efficiency. Test results show that the spike-based workouts recognition system can achieve a comparable accuracy (87.5\%) comparable to the popular milliwatt RISC-V bases multi-core processor GAP8 with a traditional neural network ( 88.1\%) while achieving two times better energy-delay product (0.66 \si{\micro\joule\second} vs. 1.32 \si{\micro\joule\second}).
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
TinyTracker: Ultra-Fast and Ultra-Low-Power Edge Vision In-Sensor for Gaze Estimation
Authors:
Pietro Bonazzi,
Thomas Ruegg,
Sizhen Bian,
Yawei Li,
Michele Magno
Abstract:
Intelligent edge vision tasks encounter the critical challenge of ensuring power and latency efficiency due to the typically heavy computational load they impose on edge platforms.This work leverages one of the first "AI in sensor" vision platforms, IMX500 by Sony, to achieve ultra-fast and ultra-low-power end-to-end edge vision applications. We evaluate the IMX500 and compare it to other edge pla…
▽ More
Intelligent edge vision tasks encounter the critical challenge of ensuring power and latency efficiency due to the typically heavy computational load they impose on edge platforms.This work leverages one of the first "AI in sensor" vision platforms, IMX500 by Sony, to achieve ultra-fast and ultra-low-power end-to-end edge vision applications. We evaluate the IMX500 and compare it to other edge platforms, such as the Google Coral Dev Micro and Sony Spresense, by exploring gaze estimation as a case study. We propose TinyTracker, a highly efficient, fully quantized model for 2D gaze estimation designed to maximize the performance of the edge vision systems considered in this study. TinyTracker achieves a 41x size reduction (600Kb) compared to iTracker [1] without significant loss in gaze estimation accuracy (maximum of 0.16 cm when fully quantized). TinyTracker's deployment on the Sony IMX500 vision sensor results in end-to-end latency of around 19ms. The camera takes around 17.9ms to read, process and transmit the pixels to the accelerator. The inference time of the network is 0.86ms with an additional 0.24 ms for retrieving the results from the sensor. The overall energy consumption of the end-to-end system is 4.9 mJ, including 0.06 mJ for inference. The end-to-end study shows that IMX500 is 1.7x faster than CoralMicro (19ms vs 34.4ms) and 7x more power efficient (4.9mJ VS 34.2mJ)
△ Less
Submitted 20 November, 2023; v1 submitted 15 July, 2023;
originally announced July 2023.
-
Flexible and Fully Quantized Ultra-Lightweight TinyissimoYOLO for Ultra-Low-Power Edge Systems
Authors:
Julian Moosmann,
Hanna Mueller,
Nicky Zimmerman,
Georg Rutishauser,
Luca Benini,
Michele Magno
Abstract:
This paper deploys and explores variants of TinyissimoYOLO, a highly flexible and fully quantized ultra-lightweight object detection network designed for edge systems with a power envelope of a few milliwatts. With experimental measurements, we present a comprehensive characterization of the network's detection performance, exploring the impact of various parameters, including input resolution, nu…
▽ More
This paper deploys and explores variants of TinyissimoYOLO, a highly flexible and fully quantized ultra-lightweight object detection network designed for edge systems with a power envelope of a few milliwatts. With experimental measurements, we present a comprehensive characterization of the network's detection performance, exploring the impact of various parameters, including input resolution, number of object classes, and hidden layer adjustments. We deploy variants of TinyissimoYOLO on state-of-the-art ultra-low-power extreme edge platforms, presenting an in-depth a comparison on latency, energy efficiency, and their ability to efficiently parallelize the workload. In particular, the paper presents a comparison between a novel parallel RISC-V processor (GAP9 from Greenwaves) with and without use of its on-chip hardware accelerator, an ARM Cortex-M7 core (STM32H7 from ST Microelectronics), two ARM Cortex-M4 cores (STM32L4 from STM and Apollo4b from Ambiq), and a multi-core platform with a CNN hardware accelerator (Analog Devices MAX78000). Experimental results show that the GAP9's hardware accelerator achieves the lowest inference latency and energy at 2.12ms and 150uJ respectively, which is around 2x faster and 20% more efficient than the next best platform, the MAX78000. The hardware accelerator of GAP9 can even run an increased resolution version of TinyissimoYOLO with 112x112 pixels and 10 detection classes within 3.2ms, consuming 245uJ. To showcase the competitiveness of a versatile general-purpose system we also deployed and profiled a multi-core implementation on GAP9 at different operating points, achieving 11.3ms with the lowest-latency and 490uJ with the most energy-efficient configuration. With this paper, we demonstrate the suitability and flexibility of TinyissimoYOLO on state-of-the-art detection datasets for real-time ultra-low-power edge inference.
△ Less
Submitted 14 July, 2023; v1 submitted 12 July, 2023;
originally announced July 2023.
-
TinyissimoYOLO: A Quantized, Low-Memory Footprint, TinyML Object Detection Network for Low Power Microcontrollers
Authors:
Julian Moosmann,
Marco Giordano,
Christian Vogt,
Michele Magno
Abstract:
This paper introduces a highly flexible, quantized, memory-efficient, and ultra-lightweight object detection network, called TinyissimoYOLO. It aims to enable object detection on microcontrollers in the power domain of milliwatts, with less than 0.5MB memory available for storing convolutional neural network (CNN) weights. The proposed quantized network architecture with 422k parameters, enables r…
▽ More
This paper introduces a highly flexible, quantized, memory-efficient, and ultra-lightweight object detection network, called TinyissimoYOLO. It aims to enable object detection on microcontrollers in the power domain of milliwatts, with less than 0.5MB memory available for storing convolutional neural network (CNN) weights. The proposed quantized network architecture with 422k parameters, enables real-time object detection on embedded microcontrollers, and it has been evaluated to exploit CNN accelerators. In particular, the proposed network has been deployed on the MAX78000 microcontroller achieving high frame-rate of up to 180fps and an ultra-low energy consumption of only 196μJ per inference with an inference efficiency of more than 106 MAC/Cycle. TinyissimoYOLO can be trained for any multi-object detection. However, considering the small network size, adding object detection classes will increase the size and memory consumption of the network, thus object detection with up to 3 classes is demonstrated. Furthermore, the network is trained using quantization-aware training and deployed with 8-bit quantization on different microcontrollers, such as STM32H7A3, STM32L4R9, Apollo4b and on the MAX78000's CNN accelerator. Performance evaluations are presented in this paper.
△ Less
Submitted 12 July, 2023; v1 submitted 22 May, 2023;
originally announced June 2023.
-
ColibriUAV: An Ultra-Fast, Energy-Efficient Neuromorphic Edge Processing UAV-Platform with Event-Based and Frame-Based Cameras
Authors:
Sizhen Bian,
Lukas Schulthess,
Georg Rutishauser,
Alfio Di Mauro,
Luca Benini,
Michele Magno
Abstract:
The interest in dynamic vision sensor (DVS)-powered unmanned aerial vehicles (UAV) is raising, especially due to the microsecond-level reaction time of the bio-inspired event sensor, which increases robustness and reduces latency of the perception tasks compared to a RGB camera. This work presents ColibriUAV, a UAV platform with both frame-based and event-based cameras interfaces for efficient per…
▽ More
The interest in dynamic vision sensor (DVS)-powered unmanned aerial vehicles (UAV) is raising, especially due to the microsecond-level reaction time of the bio-inspired event sensor, which increases robustness and reduces latency of the perception tasks compared to a RGB camera. This work presents ColibriUAV, a UAV platform with both frame-based and event-based cameras interfaces for efficient perception and near-sensor processing. The proposed platform is designed around Kraken, a novel low-power RISC-V System on Chip with two hardware accelerators targeting spiking neural networks and deep ternary neural networks.Kraken is capable of efficiently processing both event data from a DVS camera and frame data from an RGB camera. A key feature of Kraken is its integrated, dedicated interface with a DVS camera. This paper benchmarks the end-to-end latency and power efficiency of the neuromorphic and event-based UAV subsystem, demonstrating state-of-the-art event data with a throughput of 7200 frames of events per second and a power consumption of 10.7 \si{\milli\watt}, which is over 6.6 times faster and a hundred times less power-consuming than the widely-used data reading approach through the USB interface. The overall sensing and processing power consumption is below 50 mW, achieving latency in the milliseconds range, making the platform suitable for low-latency autonomous nano-drones as well.
△ Less
Submitted 27 May, 2023;
originally announced May 2023.
-
Parallelizing Optical Flow Estimation on an Ultra-Low Power RISC-V Cluster for Nano-UAV Navigation
Authors:
Jonas Kühne,
Michele Magno,
Luca Benini
Abstract:
Optical flow estimation is crucial for autonomous navigation and localization of unmanned aerial vehicles (UAV). On micro and nano UAVs, real-time calculation of the optical flow is run on low power and resource-constrained microcontroller units (MCUs). Thus, lightweight algorithms for optical flow have been proposed targeting real-time execution on traditional single-core MCUs. This paper introdu…
▽ More
Optical flow estimation is crucial for autonomous navigation and localization of unmanned aerial vehicles (UAV). On micro and nano UAVs, real-time calculation of the optical flow is run on low power and resource-constrained microcontroller units (MCUs). Thus, lightweight algorithms for optical flow have been proposed targeting real-time execution on traditional single-core MCUs. This paper introduces an efficient parallelization strategy for optical flow computation targeting new-generation multicore low power RISC-V based microcontroller units. Our approach enables higher frame rates at lower clock speeds. It has been implemented and evaluated on the eight-core cluster of a commercial octa-core MCU (GAP8) reaching a parallelization speedup factor of 7.21 allowing for a frame rate of 500 frames per second when running on a 50 MHz clock frequency. The proposed parallel algorithm significantly boosts the camera frame rate on micro unmanned aerial vehicles, which enables higher flight speeds: the maximum flight speed can be doubled, while using less than a third of the clock frequency of previous single-core implementations.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
ColibriES: A Milliwatts RISC-V Based Embedded System Leveraging Neuromorphic and Neural Networks Hardware Accelerators for Low-Latency Closed-loop Control Applications
Authors:
Georg Rutishauser,
Robin Hunziker,
Alfio Di Mauro,
Sizhen Bian,
Luca Benini,
Michele Magno
Abstract:
End-to-end event-based computation has the potential to push the envelope in latency and energy efficiency for edge AI applications. Unfortunately, event-based sensors (e.g., DVS cameras) and neuromorphic spike-based processors (e.g., Loihi) have been designed in a decoupled fashion, thereby missing major streamlining opportunities. This paper presents ColibriES, the first-ever neuromorphic hardwa…
▽ More
End-to-end event-based computation has the potential to push the envelope in latency and energy efficiency for edge AI applications. Unfortunately, event-based sensors (e.g., DVS cameras) and neuromorphic spike-based processors (e.g., Loihi) have been designed in a decoupled fashion, thereby missing major streamlining opportunities. This paper presents ColibriES, the first-ever neuromorphic hardware embedded system platform with dedicated event-sensor interfaces and full processing pipelines. ColibriES includes event and frame interfaces and data processing, aiming at efficient and long-life embedded systems in edge scenarios. ColibriES is based on the Kraken system-on-chip and contains a heterogeneous parallel ultra-low power (PULP) processor, frame-based and event-based camera interfaces, and two hardware accelerators for the computation of both event-based spiking neural networks and frame-based ternary convolutional neural networks. This paper explores and accurately evaluates the performance of event data processing on the example of gesture recognition on ColibriES, as the first step of full-system evaluation. In our experiments, we demonstrate a chip energy consumption of 7.7 \si{\milli\joule} and latency of 164.5 \si{\milli\second} of each inference with the DVS Gesture event data set as an example for closed-loop data processing, showcasing the potential of ColibriES for battery-powered applications such as wearable devices and UAVs that require low-latency closed-loop control.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Model- and Acceleration-based Pursuit Controller for High-Performance Autonomous Racing
Authors:
Jonathan Becker,
Nadine Imholz,
Luca Schwarzenbach,
Edoardo Ghignone,
Nicolas Baumann,
Michele Magno
Abstract:
Autonomous racing is a research field gaining large popularity, as it pushes autonomous driving algorithms to their limits and serves as a catalyst for general autonomous driving. For scaled autonomous racing platforms, the computational constraint and complexity often limit the use of Model Predictive Control (MPC). As a consequence, geometric controllers are the most frequently deployed controll…
▽ More
Autonomous racing is a research field gaining large popularity, as it pushes autonomous driving algorithms to their limits and serves as a catalyst for general autonomous driving. For scaled autonomous racing platforms, the computational constraint and complexity often limit the use of Model Predictive Control (MPC). As a consequence, geometric controllers are the most frequently deployed controllers. They prove to be performant while yielding implementation and operational simplicity. Yet, they inherently lack the incorporation of model dynamics, thus limiting the race car to a velocity domain where tire slip can be neglected. This paper presents Model- and Acceleration-based Pursuit (MAP) a high-performance model-based trajectory tracking algorithm that preserves the simplicity of geometric approaches while leveraging tire dynamics. The proposed algorithm allows accurate tracking of a trajectory at unprecedented velocities compared to State-of-the-Art (SotA) geometric controllers. The MAP controller is experimentally validated and outperforms the reference geometric controller four-fold in terms of lateral tracking error, yielding a tracking error of 0.055m at tested speeds up to 11m/s.
△ Less
Submitted 7 July, 2023; v1 submitted 9 September, 2022;
originally announced September 2022.
-
Robust and Efficient Depth-based Obstacle Avoidance for Autonomous Miniaturized UAVs
Authors:
Hanna Müller,
Vlad Niculescu,
Tommaso Polonelli,
Michele Magno,
Luca Benini
Abstract:
Nano-size drones hold enormous potential to explore unknown and complex environments. Their small size makes them agile and safe for operation close to humans and allows them to navigate through narrow spaces. However, their tiny size and payload restrict the possibilities for on-board computation and sensing, making fully autonomous flight extremely challenging. The first step towards full autono…
▽ More
Nano-size drones hold enormous potential to explore unknown and complex environments. Their small size makes them agile and safe for operation close to humans and allows them to navigate through narrow spaces. However, their tiny size and payload restrict the possibilities for on-board computation and sensing, making fully autonomous flight extremely challenging. The first step towards full autonomy is reliable obstacle avoidance, which has proven to be technically challenging by itself in a generic indoor environment. Current approaches utilize vision-based or 1-dimensional sensors to support nano-drone perception algorithms. This work presents a lightweight obstacle avoidance system based on a novel millimeter form factor 64 pixels multi-zone Time-of-Flight (ToF) sensor and a generalized model-free control policy. Reported in-field tests are based on the Crazyflie 2.1, extended by a custom multi-zone ToF deck, featuring a total flight mass of 35g. The algorithm only uses 0.3% of the on-board processing power (210uS execution time) with a frame rate of 15fps, providing an excellent foundation for many future applications. Less than 10% of the total drone power is needed to operate the proposed perception system, including both lifting and operating the sensor. The presented autonomous nano-size drone reaches 100% reliability at 0.5m/s in a generic and previously unexplored indoor environment. The proposed system is released open-source with an extensive dataset including ToF and gray-scale camera data, coupled with UAV position ground truth from motion capture.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Aerosense: A Self-Sustainable And Long-Range Bluetooth Wireless Sensor Node for Aerodynamic and Aeroacoustic Monitoring on Wind Turbines
Authors:
Tommaso Polonelli,
Hanna Müller,
Weikang Kong,
Raphael Fischer,
Luca Benini,
Michele Magno
Abstract:
This paper presents a low-power, self-sustainable, and modular wireless sensor node for aerodynamic and acoustic measurements on wind turbines and other industrial structures. It includes 40 high-accuracy barometers, 10 microphones, 5 differential pressure sensors, and implements a lossy and a lossless on-board data compression algorithm to decrease the transmission energy cost. The wireless trans…
▽ More
This paper presents a low-power, self-sustainable, and modular wireless sensor node for aerodynamic and acoustic measurements on wind turbines and other industrial structures. It includes 40 high-accuracy barometers, 10 microphones, 5 differential pressure sensors, and implements a lossy and a lossless on-board data compression algorithm to decrease the transmission energy cost. The wireless transmitter is based on Bluetooth Low Energy 5.1 tuned for long-range and high throughput while maintaining adequate per-bit energy efficiency (80 nJ). Moreover, we field-assessed the node capability to collect precise and accurate aerodynamic data. Outdoor experimental tests revealed that the system can acquire and sustain a data rate of 850 kbps over 438 m. The power consumption while collecting and streaming all measured data is 120 mW, enabling self-sustainability and long-term in-situ monitoring with a 111 cm^2 photovoltaic panel.
△ Less
Submitted 24 May, 2022;
originally announced May 2022.
-
TC-Driver: Trajectory Conditioned Driving for Robust Autonomous Racing -- A Reinforcement Learning Approach
Authors:
Edoardo Ghignone,
Nicolas Baumann,
Mike Boss,
Michele Magno
Abstract:
Autonomous racing is becoming popular for academic and industry researchers as a test for general autonomous driving by pushing perception, planning, and control algorithms to their limits. While traditional control methods such as MPC are capable of generating an optimal control sequence at the edge of the vehicles physical controllability, these methods are sensitive to the accuracy of the model…
▽ More
Autonomous racing is becoming popular for academic and industry researchers as a test for general autonomous driving by pushing perception, planning, and control algorithms to their limits. While traditional control methods such as MPC are capable of generating an optimal control sequence at the edge of the vehicles physical controllability, these methods are sensitive to the accuracy of the modeling parameters. This paper presents TC-Driver, a RL approach for robust control in autonomous racing. In particular, the TC-Driver agent is conditioned by a trajectory generated by any arbitrary traditional high-level planner. The proposed TC-Driver addresses the tire parameter modeling inaccuracies by exploiting the heuristic nature of RL while leveraging the reliability of traditional planning methods in a hierarchical control structure. We train the agent under varying tire conditions, allowing it to generalize to different model parameters, aiming to increase the racing capabilities of the system in practice. The proposed RL method outperforms a non-learning-based MPC with a 2.7 lower crash ratio in a model mismatch setting, underlining robustness to parameter discrepancies. In addition, the average RL inference duration is 0.25 ms compared to the average MPC solving time of 11.5 ms, yielding a nearly 40-fold speedup, allowing for complex control deployment in computationally constrained devices. Lastly, we show that the frequently utilized end-to-end RL architecture, as a control policy directly learned from sensory input, is not well suited to model mismatch robustness nor track generalization. Our realistic simulations show that TC-Driver achieves a 6.7 and 3-fold lower crash ratio under model mismatch and track generalization settings, while simultaneously achieving lower lap times than an end-to-end approach, demonstrating the viability of TC-driver to robust autonomous racing.
△ Less
Submitted 6 July, 2023; v1 submitted 19 May, 2022;
originally announced May 2022.
-
Leveraging Tactile Sensors for Low Latency Embedded Smart Hands for Prosthetic and Robotic Applications
Authors:
Xiaying Wang,
Fabian Geiger,
Vlad Niculescu,
Michele Magno,
Luca Benini
Abstract:
Tactile sensing is a crucial perception mode for robots and human amputees in need of controlling a prosthetic device. Today robotic and prosthetic systems are still missing the important feature of accurate tactile sensing. This lack is mainly due to the fact that the existing tactile technologies have limited spatial and temporal resolution and are either expensive or not scalable. In this paper…
▽ More
Tactile sensing is a crucial perception mode for robots and human amputees in need of controlling a prosthetic device. Today robotic and prosthetic systems are still missing the important feature of accurate tactile sensing. This lack is mainly due to the fact that the existing tactile technologies have limited spatial and temporal resolution and are either expensive or not scalable. In this paper, we present the design and the implementation of a hardware-software embedded system called SmartHand. It is specifically designed to enable the acquisition and the real-time processing of high-resolution tactile information from a hand-shaped multi-sensor array for prosthetic and robotic applications. During data collection, our system can deliver a high throughput of 100 frames per second, which is 13.7x higher than previous related work. We collected a new tactile dataset while interacting with daily-life objects during five different sessions. We propose a compact yet accurate convolutional neural network that requires one order of magnitude less memory and 15.6x fewer computations compared to related work without degrading classification accuracy. The top-1 and top-3 cross-validation accuracies are respectively 98.86% and 99.83%. We further analyze the inter-session variability and obtain the best top-3 leave-one-out-validation accuracy of 77.84%. We deploy the trained model on a high-performance ARM Cortex-M7 microcontroller achieving an inference time of only 100 ms minimizing the response latency. The overall measured power consumption is 505 mW. Finally, we fabricate a new control sensor and perform additional experiments to provide analyses on sensor degradation and slip detection. This work is a step forward in giving robotic and prosthetic devices a sense of touch and demonstrates the practicality of a smart embedded system empowered by tiny machine learning.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Sub-mW Keyword Spotting on an MCU: Analog Binary Feature Extraction and Binary Neural Networks
Authors:
Gianmarco Cerutti,
Lukas Cavigelli,
Renzo Andri,
Michele Magno,
Elisabetta Farella,
Luca Benini
Abstract:
Keyword spotting (KWS) is a crucial function enabling the interaction with the many ubiquitous smart devices in our surroundings, either activating them through wake-word or directly as a human-computer interface. For many applications, KWS is the entry point for our interactions with the device and, thus, an always-on workload. Many smart devices are mobile and their battery lifetime is heavily i…
▽ More
Keyword spotting (KWS) is a crucial function enabling the interaction with the many ubiquitous smart devices in our surroundings, either activating them through wake-word or directly as a human-computer interface. For many applications, KWS is the entry point for our interactions with the device and, thus, an always-on workload. Many smart devices are mobile and their battery lifetime is heavily impacted by continuously running services. KWS and similar always-on services are thus the focus when optimizing the overall power consumption. This work addresses KWS energy-efficiency on low-cost microcontroller units (MCUs). We combine analog binary feature extraction with binary neural networks. By replacing the digital preprocessing with the proposed analog front-end, we show that the energy required for data acquisition and preprocessing can be reduced by 29x, cutting its share from a dominating 85% to a mere 16% of the overall energy consumption for our reference KWS application. Experimental evaluations on the Speech Commands Dataset show that the proposed system outperforms state-of-the-art accuracy and energy efficiency, respectively, by 1% and 4.3x on a 10-class dataset while providing a compelling accuracy-energy trade-off including a 2% accuracy drop for a 71x energy reduction.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
SmartHand: Towards Embedded Smart Hands for Prosthetic and Robotic Applications
Authors:
Xiaying Wang,
Fabian Geiger,
Vlad Niculescu,
Michele Magno,
Luca Benini
Abstract:
The sophisticated sense of touch of the human hand significantly contributes to our ability to safely, efficiently, and dexterously manipulate arbitrary objects in our environment. Robotic and prosthetic devices lack refined, tactile feedback from their end-effectors, leading to counterintuitive and complex control strategies. To address this lack, tactile sensors have been designed and developed,…
▽ More
The sophisticated sense of touch of the human hand significantly contributes to our ability to safely, efficiently, and dexterously manipulate arbitrary objects in our environment. Robotic and prosthetic devices lack refined, tactile feedback from their end-effectors, leading to counterintuitive and complex control strategies. To address this lack, tactile sensors have been designed and developed, but they often offer an insufficient spatial and temporal resolution. This paper focuses on overcoming these issues by designing a smart embedded system, called SmartHand, enabling the acquisition and real-time processing of high-resolution tactile information from a hand-shaped multi-sensor array for prosthetic and robotic applications. We acquire a new tactile dataset consisting of 340,000 frames while interacting with 16 everyday objects and the empty hand, i.e., a total of 17 classes. The design of the embedded system minimizes response latency in classification, by deploying a small yet accurate convolutional neural network on a high-performance ARM Cortex-M7 microcontroller. Compared to related work, our model requires one order of magnitude less memory and 15.6x fewer computations while achieving similar inter-session accuracy and up to 98.86% and 99.83% top-1 and top-3 cross-validation accuracy, respectively. Experimental results show a total power consumption of 505mW and a latency of only 100ms.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
High-Accuracy Ranging and Localization with Ultra-Wideband Communications for Energy-Constrained Devices
Authors:
L. Flueratoru,
S. Wehrli,
M. Magno,
E. S. Lohan,
D. Niculescu
Abstract:
Ultra-wideband (UWB) communications have gained popularity in recent years for being able to provide distance measurements and localization with high accuracy, which can enhance the capabilities of devices in the Internet of Things (IoT). Since energy efficiency is of utmost concern in such applications, in this work we evaluate the power and energy consumption, distance measurements, and localiza…
▽ More
Ultra-wideband (UWB) communications have gained popularity in recent years for being able to provide distance measurements and localization with high accuracy, which can enhance the capabilities of devices in the Internet of Things (IoT). Since energy efficiency is of utmost concern in such applications, in this work we evaluate the power and energy consumption, distance measurements, and localization performance of two types of UWB physical interfaces (PHYs), which use either a low- or high-rate pulse repetition (LRP and HRP, respectively). The evaluation is done through measurements acquired in identical conditions, which is crucial in order to have a fair comparison between the devices. The LRP devices that we tested have the same ranging and localization performance, but ten times (10x) lower power consumption, 6x lower energy consumption per distance measurement, and at least 8x higher coverage than the HRP devices. Therefore, UWB LRP devices can offer high-accuracy ranging and localization even to ultra-low-power devices in the IoT. We performed measurements in typical LOS and NLOS scenarios and propose theoretical models for the distance errors obtained in these situations. The models can be used to simulate realistic building deployments and we illustrate such an example. This paper, therefore, provides a comprehensive overview of the energy demands, ranging characteristics, and localization performance of state-of-the-art UWB devices.
△ Less
Submitted 3 November, 2021; v1 submitted 22 April, 2021;
originally announced April 2021.
-
Sound Event Detection with Binary Neural Networks on Tightly Power-Constrained IoT Devices
Authors:
Gianmarco Cerutti,
Renzo Andri,
Lukas Cavigelli,
Michele Magno,
Elisabetta Farella,
Luca Benini
Abstract:
Sound event detection (SED) is a hot topic in consumer and smart city applications. Existing approaches based on Deep Neural Networks are very effective, but highly demanding in terms of memory, power, and throughput when targeting ultra-low power always-on devices.
Latency, availability, cost, and privacy requirements are pushing recent IoT systems to process the data on the node, close to the…
▽ More
Sound event detection (SED) is a hot topic in consumer and smart city applications. Existing approaches based on Deep Neural Networks are very effective, but highly demanding in terms of memory, power, and throughput when targeting ultra-low power always-on devices.
Latency, availability, cost, and privacy requirements are pushing recent IoT systems to process the data on the node, close to the sensor, with a very limited energy supply, and tight constraints on the memory size and processing capabilities precluding to run state-of-the-art DNNs.
In this paper, we explore the combination of extreme quantization to a small-footprint binary neural network (BNN) with the highly energy-efficient, RISC-V-based (8+1)-core GAP8 microcontroller. Starting from an existing CNN for SED whose footprint (815 kB) exceeds the 512 kB of memory available on our platform, we retrain the network using binary filters and activations to match these memory constraints. (Fully) binary neural networks come with a natural drop in accuracy of 12-18% on the challenging ImageNet object recognition challenge compared to their equivalent full-precision baselines. This BNN reaches a 77.9% accuracy, just 7% lower than the full-precision version, with 58 kB (7.2 times less) for the weights and 262 kB (2.4 times less) memory in total. With our BNN implementation, we reach a peak throughput of 4.6 GMAC/s and 1.5 GMAC/s over the full network, including preprocessing with Mel bins, which corresponds to an efficiency of 67.1 GMAC/s/W and 31.3 GMAC/s/W, respectively. Compared to the performance of an ARM Cortex-M4 implementation, our system has a 10.3 times faster execution time and a 51.1 times higher energy-efficiency.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
TinyRadarNN: Combining Spatial and Temporal Convolutional Neural Networks for Embedded Gesture Recognition with Short Range Radars
Authors:
Moritz Scherer,
Michele Magno,
Jonas Erb,
Philipp Mayer,
Manuel Eggimann,
Luca Benini
Abstract:
This work proposes a low-power high-accuracy embedded hand-gesture recognition algorithm targeting battery-operated wearable devices using low power short-range RADAR sensors. A 2D Convolutional Neural Network (CNN) using range frequency Doppler features is combined with a Temporal Convolutional Neural Network (TCN) for time sequence prediction. The final algorithm has a model size of only 46 thou…
▽ More
This work proposes a low-power high-accuracy embedded hand-gesture recognition algorithm targeting battery-operated wearable devices using low power short-range RADAR sensors. A 2D Convolutional Neural Network (CNN) using range frequency Doppler features is combined with a Temporal Convolutional Neural Network (TCN) for time sequence prediction. The final algorithm has a model size of only 46 thousand parameters, yielding a memory footprint of only 92 KB. Two datasets containing 11 challenging hand gestures performed by 26 different people have been recorded containing a total of 20,210 gesture instances. On the 11 hand gesture dataset, accuracies of 86.6% (26 users) and 92.4% (single user) have been achieved, which are comparable to the state-of-the-art, which achieves 87% (10 users) and 94% (single user), while using a TCN-based network that is 7500x smaller than the state-of-the-art. Furthermore, the gesture recognition classifier has been implemented on a Parallel Ultra-Low Power Processor, demonstrating that real-time prediction is feasible with only 21 mW of power consumption for the full TCN sequence prediction network, while a system-level power consumption of less than 100 mW is achieved. We provide open-source access to all the code and data collected and used in this work on tinyradar.ethz.ch.
△ Less
Submitted 16 March, 2021; v1 submitted 25 June, 2020;
originally announced June 2020.
-
An Accurate EEGNet-based Motor-Imagery Brain-Computer Interface for Low-Power Edge Computing
Authors:
Xiaying Wang,
Michael Hersche,
Batuhan Tömekce,
Burak Kaya,
Michele Magno,
Luca Benini
Abstract:
This paper presents an accurate and robust embedded motor-imagery brain-computer interface (MI-BCI). The proposed novel model, based on EEGNet, matches the requirements of memory footprint and computational resources of low-power microcontroller units (MCUs), such as the ARM Cortex-M family. Furthermore, the paper presents a set of methods, including temporal downsampling, channel selection, and n…
▽ More
This paper presents an accurate and robust embedded motor-imagery brain-computer interface (MI-BCI). The proposed novel model, based on EEGNet, matches the requirements of memory footprint and computational resources of low-power microcontroller units (MCUs), such as the ARM Cortex-M family. Furthermore, the paper presents a set of methods, including temporal downsampling, channel selection, and narrowing of the classification window, to further scale down the model to relax memory requirements with negligible accuracy degradation. Experimental results on the Physionet EEG Motor Movement/Imagery Dataset show that standard EEGNet achieves 82.43%, 75.07%, and 65.07% classification accuracy on 2-, 3-, and 4-class MI tasks in global validation, outperforming the state-of-the-art (SoA) convolutional neural network (CNN) by 2.05%, 5.25%, and 5.48%. Our novel method further scales down the standard EEGNet at a negligible accuracy loss of 0.31% with 7.6x memory footprint reduction and a small accuracy loss of 2.51% with 15x reduction. The scaled models are deployed on a commercial Cortex-M4F MCU taking 101ms and consuming 4.28mJ per inference for operating the smallest model, and on a Cortex-M7 with 44ms and 18.1mJ per inference for the medium-sized model, enabling a fully autonomous, wearable, and accurate low-power BCI.
△ Less
Submitted 16 January, 2023; v1 submitted 31 March, 2020;
originally announced April 2020.
-
HR-SAR-Net: A Deep Neural Network for Urban Scene Segmentation from High-Resolution SAR Data
Authors:
Xiaying Wang,
Lukas Cavigelli,
Manuel Eggimann,
Michele Magno,
Luca Benini
Abstract:
Synthetic aperture radar (SAR) data is becoming increasingly available to a wide range of users through commercial service providers with resolutions reaching 0.5m/px. Segmenting SAR data still requires skilled personnel, limiting the potential for large-scale use. We show that it is possible to automatically and reliably perform urban scene segmentation from next-gen resolution SAR data (0.15m/px…
▽ More
Synthetic aperture radar (SAR) data is becoming increasingly available to a wide range of users through commercial service providers with resolutions reaching 0.5m/px. Segmenting SAR data still requires skilled personnel, limiting the potential for large-scale use. We show that it is possible to automatically and reliably perform urban scene segmentation from next-gen resolution SAR data (0.15m/px) using deep neural networks (DNNs), achieving a pixel accuracy of 95.19% and a mean IoU of 74.67% with data collected over a region of merely 2.2km${}^2$. The presented DNN is not only effective, but is very small with only 63k parameters and computationally simple enough to achieve a throughput of around 500Mpx/s using a single GPU. We further identify that additional SAR receive antennas and data from multiple flights massively improve the segmentation accuracy. We describe a procedure for generating a high-quality segmentation ground truth from multiple inaccurate building and road annotations, which has been crucial to achieving these segmentation results.
△ Less
Submitted 16 January, 2023; v1 submitted 9 December, 2019;
originally announced December 2019.
-
FANN-on-MCU: An Open-Source Toolkit for Energy-Efficient Neural Network Inference at the Edge of the Internet of Things
Authors:
Xiaying Wang,
Michele Magno,
Lukas Cavigelli,
Luca Benini
Abstract:
The growing number of low-power smart devices in the Internet of Things is coupled with the concept of "Edge Computing", that is moving some of the intelligence, especially machine learning, towards the edge of the network. Enabling machine learning algorithms to run on resource-constrained hardware, typically on low-power smart devices, is challenging in terms of hardware (optimized and energy-ef…
▽ More
The growing number of low-power smart devices in the Internet of Things is coupled with the concept of "Edge Computing", that is moving some of the intelligence, especially machine learning, towards the edge of the network. Enabling machine learning algorithms to run on resource-constrained hardware, typically on low-power smart devices, is challenging in terms of hardware (optimized and energy-efficient integrated circuits), algorithmic and firmware implementations. This paper presents FANN-on-MCU, an open-source toolkit built upon the Fast Artificial Neural Network (FANN) library to run lightweight and energy-efficient neural networks on microcontrollers based on both the ARM Cortex-M series and the novel RISC-V-based Parallel Ultra-Low-Power (PULP) platform. The toolkit takes multi-layer perceptrons trained with FANN and generates code targeted at execution on low-power microcontrollers either with a floating-point unit (i.e., ARM Cortex-M4F and M7F) or without (i.e., ARM Cortex M0-M3 or PULP-based processors). This paper also provides an architectural performance evaluation of neural networks on the most popular ARM Cortex-M family and the parallel RISC-V processor called Mr. Wolf. The evaluation includes experimental results for three different applications using a self-sustainable wearable multi-sensor bracelet. Experimental results show a measured latency in the order of only a few microseconds and a power consumption of few milliwatts while kee** the memory requirements below the limitations of the targeted microcontrollers. In particular, the parallel implementation on the octa-core RISC-V platform reaches a speedup of 22x and a 69% reduction in energy consumption with respect to a single-core implementation on Cortex-M4 for continuous real-time classification.
△ Less
Submitted 17 February, 2022; v1 submitted 8 November, 2019;
originally announced November 2019.
-
KRATOS: An Open Source Hardware-Software Platform for Rapid Research in LPWANs
Authors:
Rajeev Piyare,
Amy L. Murphy,
Michele Magno,
Luca Benini
Abstract:
Long-range (LoRa) radio technologies have recently gained momentum in the IoT landscape, allowing low-power communications over distances up to several kilometers. As a result, more and more LoRa networks are being deployed. However, commercially available LoRa devices are expensive and propriety, creating a barrier to entry and possibly slowing down developments and deployments of novel applicati…
▽ More
Long-range (LoRa) radio technologies have recently gained momentum in the IoT landscape, allowing low-power communications over distances up to several kilometers. As a result, more and more LoRa networks are being deployed. However, commercially available LoRa devices are expensive and propriety, creating a barrier to entry and possibly slowing down developments and deployments of novel applications. Using open-source hardware and software platforms would allow more developers to test and build intelligent devices resulting in a better overall development ecosystem, lower barriers to entry, and rapid growth in the number of IoT applications. Toward this goal, this paper presents the design, implementation, and evaluation of KRATOS, a low-cost LoRa platform running ContikiOS. Both, our hardware and software designs are released as an open- source to the research community.
△ Less
Submitted 11 September, 2018;
originally announced September 2018.
-
On-Demand TDMA for Energy Efficient Data Collection with LoRa and Wake-up Receiver
Authors:
Rajeev Piyare,
Amy L. Murphy,
Michele Magno,
Luca Benini
Abstract:
Low-power and long-range communication tech- nologies such as LoRa are becoming popular in IoT applications due to their ability to cover kilometers range with milliwatt of power consumption. One of the major drawbacks of LoRa is the data latency and the traffic congestion when the number of devices in the network increases. Especially, the latency arises due to the extreme duty cycling of LoRa en…
▽ More
Low-power and long-range communication tech- nologies such as LoRa are becoming popular in IoT applications due to their ability to cover kilometers range with milliwatt of power consumption. One of the major drawbacks of LoRa is the data latency and the traffic congestion when the number of devices in the network increases. Especially, the latency arises due to the extreme duty cycling of LoRa end-nodes for reducing the overall energy consumption. To overcome this drawback, we propose a heterogeneous network architecture and an energy-efficient On-demand TDMA communication scheme improving both the device lifetime and the data latency of standard LoRa networks. We combine the capabilities of micro- watt wake-up receivers to achieve ultra-low power states and pure asynchronous communication together with the long-range connectivity of LoRa. Experimental results show a data reliability of 100% and a round-trip latency on the order of milliseconds with end devices dissipating less than 46 mJ when active and 1.83 μW during periods of inactivity, lasting up to 3 years on a 1200 mAh Lithium battery.
△ Less
Submitted 11 September, 2018;
originally announced September 2018.
-
Computationally Efficient Target Classification in Multispectral Image Data with Deep Neural Networks
Authors:
Lukas Cavigelli,
Dominic Bernath,
Michele Magno,
Luca Benini
Abstract:
Detecting and classifying targets in video streams from surveillance cameras is a cumbersome, error-prone and expensive task. Often, the incurred costs are prohibitive for real-time monitoring. This leads to data being stored locally or transmitted to a central storage site for post-incident examination. The required communication links and archiving of the video data are still expensive and this…
▽ More
Detecting and classifying targets in video streams from surveillance cameras is a cumbersome, error-prone and expensive task. Often, the incurred costs are prohibitive for real-time monitoring. This leads to data being stored locally or transmitted to a central storage site for post-incident examination. The required communication links and archiving of the video data are still expensive and this setup excludes preemptive actions to respond to imminent threats. An effective way to overcome these limitations is to build a smart camera that transmits alerts when relevant video sequences are detected. Deep neural networks (DNNs) have come to outperform humans in visual classifications tasks. The concept of DNNs and Convolutional Networks (ConvNets) can easily be extended to make use of higher-dimensional input data such as multispectral data. We explore this opportunity in terms of achievable accuracy and required computational effort. To analyze the precision of DNNs for scene labeling in an urban surveillance scenario we have created a dataset with 8 classes obtained in a field experiment. We combine an RGB camera with a 25-channel VIS-NIR snapshot sensor to assess the potential of multispectral image data for target classification. We evaluate several new DNNs, showing that the spectral information fused together with the RGB frames can be used to improve the accuracy of the system or to achieve similar accuracy with a 3x smaller computation effort. We achieve a very high per-pixel accuracy of 99.1%. Even for scarcely occurring, but particularly interesting classes, such as cars, 75% of the pixels are labeled correctly with errors occurring only around the border of the objects. This high accuracy was obtained with a training set of only 30 labeled images, paving the way for fast adaptation to various application scenarios.
△ Less
Submitted 9 November, 2016;
originally announced November 2016.