-
Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
Authors:
David Prévost,
Sylvain Lavernhe,
Claire Lartigue,
Didier Dumur
Abstract:
Within the context of High Speed Machining, it is essential to manage the trajectory generation to achieve both high surface quality and high productivity. As feed drives are one part of the set Machine tool - Numerical Controller, it is necessary to improve their performances to optimize feed drive dynamics during trajectory follow up. Hence, this paper deals with the modelling of the feed drive…
▽ More
Within the context of High Speed Machining, it is essential to manage the trajectory generation to achieve both high surface quality and high productivity. As feed drives are one part of the set Machine tool - Numerical Controller, it is necessary to improve their performances to optimize feed drive dynamics during trajectory follow up. Hence, this paper deals with the modelling of the feed drive in the case of multi axis machining. This model can be used for the simulation of axis dynamics and tool-path tracking to tune parameters and optimize new frameworks of command strategies. A procedure of identification based on modern NC capabilities is presented and applied to industrial HSM centres. Efficiency of this modelling is assessed by experimental verifications on various representative trajectories. After implementing a Generalized Predictive Control, reliable simulations are performed thanks to the model. These simulations can then be used to tune parameters of this new framework according to the tool-path geometry.
△ Less
Submitted 16 July, 2011;
originally announced July 2011.
-
Characterization of 3D surface topography in 5-axis milling
Authors:
Yann Quinsat,
Sylvain Lavernhe,
Claire Lartigue
Abstract:
Within the context of 5-axis free-form machining, CAM software offers various ways of tool-path generation, depending on the geometry of the surface to be machined. Therefore, as the manufactured surface quality results from the choice of the machining strategy and machining parameters, the prediction of surface roughness in function of the machining conditions is an important issue in 5-axis mach…
▽ More
Within the context of 5-axis free-form machining, CAM software offers various ways of tool-path generation, depending on the geometry of the surface to be machined. Therefore, as the manufactured surface quality results from the choice of the machining strategy and machining parameters, the prediction of surface roughness in function of the machining conditions is an important issue in 5-axis machining. The objective of this paper is to propose a simulation model of material removal in 5-axis based on the N-buffer method and integrating the Inverse Kinematics Transformation. The tooth track is linked with the velocity giving the surface topography resulting from actual machining conditions. The model is assessed thanks to a series of swee** over planes according to various tool axis orientations and cutting conditions. 3D surface topography analyses are performed through the new areal surface roughness parameters proposed by recent standards.
△ Less
Submitted 10 June, 2011;
originally announced June 2011.
-
Usinage de poches en UGV - Aide au choix de stratégies
Authors:
Kwamiwi Mawussi,
Sylvain Lavernhe,
Claire Lartigue
Abstract:
The paper deals with associating the optimal machining strategy to a given pocket geometry, within the context of High-Speed Machining (HSM) of aeronautical pockets. First we define different classes of pocket features according to geometrical criteria. Following, we propose a method allowing to associate a set of capable tools to the features. Each capable tool defines a machined zone with a sp…
▽ More
The paper deals with associating the optimal machining strategy to a given pocket geometry, within the context of High-Speed Machining (HSM) of aeronautical pockets. First we define different classes of pocket features according to geometrical criteria. Following, we propose a method allowing to associate a set of capable tools to the features. Each capable tool defines a machined zone with a specific geometry. The last part of the paper is thus dedicated to associate the optimal machining strategy to a given geometry within the context of HSM. Results highlight that analyses must be conducted in a dynamical as well as a geometrical viewpoint. In particular, it becomes necessary to integrate dynamical specifities associated to the behavior of the couple machine/NC unit in the tool path calculation.
△ Less
Submitted 7 April, 2009;
originally announced April 2009.
-
5-axis High Speed Milling Optimisation
Authors:
Christophe Tournier,
Sylvain Lavernhe,
Claire Lartigue
Abstract:
Manufacturing of free form parts relies on the calculation of a tool path based on a CAD model, on a machining strategy and on a given numerically controlled machine tool. In order to reach the best possible performances, it is necessary to take into account a maximum of constraints during tool path calculation. For this purpose, we have developed a surface representation of the tool paths to ma…
▽ More
Manufacturing of free form parts relies on the calculation of a tool path based on a CAD model, on a machining strategy and on a given numerically controlled machine tool. In order to reach the best possible performances, it is necessary to take into account a maximum of constraints during tool path calculation. For this purpose, we have developed a surface representation of the tool paths to manage 5-axis High Speed Milling, which is the most complicated case. This model allows integrating early in the step of tool path computation the machine tool geometrical constraints (axis ranges, part holder orientation), kinematical constraints (speed and acceleration on the axes, singularities) as well as gouging issues between the tool and the part. The aim of the paper is to optimize the step of 5-axis HSM tool path calculation with a bi-parameter surface representation of the tool path. We propose an example of integration of the digital process for tool path computation, ensuring the required quality and maximum productivity
△ Less
Submitted 7 April, 2009;
originally announced April 2009.