-
Mitigating Hand Blockage with Non-Directional Beamforming Codebooks
Authors:
Vasanthan Raghavan,
Ricardo A. Motos,
M. Ali Tassoudji,
Yu-Chin Ou,
Ozge H. Koymen,
Junyi Li
Abstract:
Hand blockage leads to significant performance impairments at millimeter wave carrier frequencies. A number of prior works have characterized the loss in signal strength with the hand using studies with horn antennas and form-factor user equipments (UEs). However, the impact of the hand on the effective phase response seen by the antenna elements has not been studied so far. Towards this goal, we…
▽ More
Hand blockage leads to significant performance impairments at millimeter wave carrier frequencies. A number of prior works have characterized the loss in signal strength with the hand using studies with horn antennas and form-factor user equipments (UEs). However, the impact of the hand on the effective phase response seen by the antenna elements has not been studied so far. Towards this goal, we consider a measurement framework that uses a hand phantom holding the UE in relaxed positions reflective of talk mode, watching videos, and playing games. We first study the impact of blockage on a directional beam steering codebook. The tight phase relationship across antenna elements needed to steer beams leads to a significant performance degradation as the hand surface can distort the observed amplitudes and phases across the antenna elements, which cannot be matched by this codebook. To overcome this loss, we propose a non-directional beamforming codebook made of amplitudes and/or quantized phases with both these quantities estimated as necessary. Theoretical as well as numerical studies show that the proposed codebook can de-randomize the phase distortions induced by the hand and coherently combine the energy across antenna elements and thus help in mitigating hand blockage losses.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Hand and Body Blockage Measurements with Form-Factor User Equipment at 28 GHz
Authors:
Vasanthan Raghavan,
Sonsay Noimanivone,
Sung Kil Rho,
Bernie Farin,
Patrick Connor,
Ricardo A. Motos,
Yu-Chin Ou,
Kobi Ravid,
M. Ali Tassoudji,
Ozge H. Koymen,
Junyi Li
Abstract:
Blockage by the human hand/body is an important impairment in realizing practical millimeter wave wireless systems. Prior works on blockage modeling are either based on theoretical studies of double knife edge diffraction or its modifications, high-frequency simulations of electromagnetic effects, or measurements with experimental millimeter wave prototypes. While such studies are useful, they do…
▽ More
Blockage by the human hand/body is an important impairment in realizing practical millimeter wave wireless systems. Prior works on blockage modeling are either based on theoretical studies of double knife edge diffraction or its modifications, high-frequency simulations of electromagnetic effects, or measurements with experimental millimeter wave prototypes. While such studies are useful, they do not capture the form-factor constraints of user equipments (UEs). In this work, we study the impact of hand/body blockage with a UE at $28$ GHz built on Qualcomm's millimeter wave modem, antenna modules and beamforming solutions. We report five exhaustive and controlled studies with different types of hand holdings/grips, antenna types, and with directional/narrow beams. For both hard as well as loose hand grips, we report considerably lower blockage loss estimates than prior works. Critical in estimating the loss is the definition of a "region of interest" (RoI) around the UE where the impact of the hand/body is seen. Towards this goal, we define a RoI that includes the spatial area where significant energy is seen in either the no blockage or blockage modes. Our studies show that significant spatial area coverage improvement can be seen with loose hand grip due to hand reflections.
△ Less
Submitted 8 December, 2019;
originally announced December 2019.
-
Antenna Placement and Performance Tradeoffs with Hand Blockage in Millimeter Wave Systems
Authors:
Vasanthan Raghavan,
Mei-Li,
Chi,
M. Ali Tassoudji,
Ozge H. Koymen,
Junyi Li
Abstract:
The ongoing commercial deployment of millimeter wave systems brings into focus a number of practical issues in form factor user equipment (UE) design. With wavelengths becoming smaller, antenna gain patterns becoming directional, and link budgets critically dependent on beamforming, it becomes imperative to use a number of antenna modules at different locations of the UE for good performance. Whil…
▽ More
The ongoing commercial deployment of millimeter wave systems brings into focus a number of practical issues in form factor user equipment (UE) design. With wavelengths becoming smaller, antenna gain patterns becoming directional, and link budgets critically dependent on beamforming, it becomes imperative to use a number of antenna modules at different locations of the UE for good performance. While more antennas/modules can enhance beamforming array gains, it comes with the tradeoff of higher component cost, power consumption of the associated radio frequency circuitry, and a beam management overhead in learning the appropriate beam weights. Thus, the goal of a good UE design is to provide robust spherical coverage corresponding to good array gains over the entire sphere around the UE with a low beam management overhead, complexity, and cost. The scope of this paper is to study the implications of two popular commercial millimeter wave UE designs (a face and an edge design) on spherical coverage. We show that analog beam codebooks can result in good performance for both the designs, and the edge design provides a better tradeoff in terms of robust performance (with hand blockage), beam management overhead, implementation complexity from an antenna placement standpoint and cost.
△ Less
Submitted 3 January, 2019;
originally announced January 2019.
-
Channel Reconstruction-Based Hybrid Precoding for Millimeter Wave Multi-User MIMO Systems
Authors:
Miguel R. Castellanos,
Vasanthan Raghavan,
Jung H. Ryu,
Ozge H. Koymen,
Junyi Li,
David J. Love,
Borja Peleato
Abstract:
The focus of this paper is on multi-user MIMO transmissions for millimeter wave systems with a hybrid precoding architecture at the base-station. To enable multi-user transmissions, the base-station uses a cell-specific codebook of beamforming vectors over an initial beam alignment phase. Each user uses a user-specific codebook of beamforming vectors to learn the top-P (where P >= 1) beam pairs in…
▽ More
The focus of this paper is on multi-user MIMO transmissions for millimeter wave systems with a hybrid precoding architecture at the base-station. To enable multi-user transmissions, the base-station uses a cell-specific codebook of beamforming vectors over an initial beam alignment phase. Each user uses a user-specific codebook of beamforming vectors to learn the top-P (where P >= 1) beam pairs in terms of the observed SNR in a single-user setting. The top-P beam indices along with their SNRs are fed back from each user and the base-station leverages this information to generate beam weights for simultaneous transmissions. A typical method to generate the beam weights is to use only the best beam for each user and either steer energy along this beam, or to utilize this information to reduce multi-user interference. The other beams are used as fall back options to address blockage or mobility. Such an approach completely discards information learned about the channel condition(s) even though each user feeds back this information. With this background, this work develops an advanced directional precoding structure for simultaneous transmissions at the cost of an additional marginal feedback overhead. This construction relies on three main innovations: 1) Additional feedback to allow the base-station to reconstruct a rank-P approximation of the channel matrix between it and each user, 2) A zeroforcing structure that leverages this information to combat multi-user interference by remaining agnostic of the receiver beam knowledge in the precoder design, and 3) A hybrid precoding architecture that allows both amplitude and phase control at low-complexity and cost to allow the implementation of the zeroforcing structure. Numerical studies show that the proposed scheme results in a significant sum rate performance improvement over naive schemes even with a coarse initial beam alignment codebook.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Statistical Blockage Modeling and Robustness of Beamforming in Millimeter Wave Systems
Authors:
Vasanthan Raghavan,
Lida Akhoondzadeh-asl,
Vladimir Podshivalov,
Joakim Hulten,
M. Ali Tassoudji,
Ozge Hizir Koymen,
Ashwin Sampath,
Junyi Li
Abstract:
There has been a growing interest in the commercialization of millimeter wave (mmW) technology as a part of the Fifth-Generation New Radio (5G-NR) wireless standardization efforts. In this direction, many sets of independent measurement campaigns show that wireless propagation at mmW carrier frequencies is only marginally worse than propagation at sub-6 GHz carrier frequencies for small-cell cover…
▽ More
There has been a growing interest in the commercialization of millimeter wave (mmW) technology as a part of the Fifth-Generation New Radio (5G-NR) wireless standardization efforts. In this direction, many sets of independent measurement campaigns show that wireless propagation at mmW carrier frequencies is only marginally worse than propagation at sub-6 GHz carrier frequencies for small-cell coverage --- one of the most important use-cases for 5G-NR. On the other hand, the biggest determinants of viability of mmW systems in practice are penetration and blockage of mmW signals through different materials in the scattering environment. With this background, the focus of this paper is on understanding the impact of blockage of mmW signals and reduced spatial coverage due to penetration through the human hand, body, vehicles, etc. Leveraging measurements with a 28 GHz mmW experimental prototype and electromagnetic simulation studies, we first propose statistical blockage models to capture the impact of the hand, human body and vehicles. We then study the time-scales at which mmW signals are disrupted by blockage (hand and human body). Our results show that these events can be attributed to physical movements and the time-scales corresponding to blockage are hence on the order of a few 100 ms or more. Building on this fundamental understanding, we finally consider the broader question of robustness of mmW beamforming to handle blockage. Network densification, subarray switching in a user equipment (UE) designed with multiple subarrays, fall back mechanisms such as codebook enhancements and switching to legacy carriers in non-standalone deployments, etc. can address blockage before it leads to a deleterious impact on the mmW link margin.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Millimeter Wave MIMO Prototype: Measurements and Experimental Results
Authors:
Vasanthan Raghavan,
Andrzej Partyka,
Ashwin Sampath,
Sundar Subramanian,
Ozge Hizir Koymen,
Kobi Ravid,
Juergen Cezanne,
Kiran Mukkavilli,
Junyi Li
Abstract:
Millimeter-wave multi-input multi-output (mm-Wave MIMO) systems are one of the candidate schemes for 5G wireless standardization efforts. In this context, the main contributions of this article are three-fold. 1) We describe parallel sets of measurements at identical transmit-receive location pairs with 2.9, 29 and 61 GHz carrier frequencies in indoor office, shop** mall, and outdoor settings. T…
▽ More
Millimeter-wave multi-input multi-output (mm-Wave MIMO) systems are one of the candidate schemes for 5G wireless standardization efforts. In this context, the main contributions of this article are three-fold. 1) We describe parallel sets of measurements at identical transmit-receive location pairs with 2.9, 29 and 61 GHz carrier frequencies in indoor office, shop** mall, and outdoor settings. These measurements provide insights on propagation, blockage and material penetration losses, and the key elements necessary in system design to make mm-Wave systems viable in practice. 2) One of these elements is hybrid beamforming necessary for better link margins by rea** the array gain with large antenna dimensions. From the class of fully-flexible hybrid beamformers, we describe a robust class of directional beamformers towards meeting the high data-rate requirements of mm-Wave systems. 3) Leveraging these design insights, we then describe an experimental prototype system at 28 GHz that realizes high data-rates on both the downlink and uplink and robustly maintains these rates in outdoor and indoor mobility scenarios. In addition to maintaining large signal constellation sizes in spite of radio frequency challenges, this prototype leverages the directional nature of the mm-Wave channel to perform seamless beam switching and handover across mm-Wave base-stations thereby overcoming the path losses in non-line-of-sight links and blockages encountered at mm-Wave frequencies.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
