-
Adaptive Behavioral Model Learning for Software Product Lines
Authors:
Shaghayegh Tavassoli,
Carlos Diego Nascimento Damasceno,
Ramtin Khosravi,
Mohammad Reza Mousavi
Abstract:
Behavioral models enable the analysis of the functionality of software product lines (SPL), e.g., model checking and model-based testing. Model learning aims at constructing behavioral models for software systems in some form of a finite state machine. Due to the commonalities among the products of an SPL, it is possible to reuse the previously learned models during the model learning process. In…
▽ More
Behavioral models enable the analysis of the functionality of software product lines (SPL), e.g., model checking and model-based testing. Model learning aims at constructing behavioral models for software systems in some form of a finite state machine. Due to the commonalities among the products of an SPL, it is possible to reuse the previously learned models during the model learning process. In this paper, an adaptive approach (the $\text{PL}^*$ method) for learning the product models of an SPL is presented based on the well-known $L^*$ algorithm. In this method, after model learning of each product, the sequences in the final observation table are stored in a repository which will be used to initialize the observation table of the remaining products to be learned. The proposed algorithm is evaluated on two open-source SPLs and the total learning cost is measured in terms of the number of rounds, the total number of resets and input symbols. The results show that for complex SPLs, the total learning cost for the $\text{PL}^*$ method is significantly lower than that of the non-adaptive learning method in terms of all three metrics. Furthermore, it is observed that the order in which the products are learned affects the efficiency of the $\text{PL}^*$ method. Based on this observation, we introduced a heuristic to determine an ordering which reduces the total cost of adaptive learning in both case studies.
△ Less
Submitted 1 August, 2022; v1 submitted 11 July, 2022;
originally announced July 2022.
-
A Benchmark for Active Learning of Variability-Intensive Systems
Authors:
Shaghayegh Tavassoli,
Carlos Diego Nascimento Damasceno,
Mohammad Reza Mousavi,
Ramtin Khosravi
Abstract:
Behavioral models are the key enablers for behavioral analysis of Software Product Lines (SPL), including testing and model checking. Active model learning comes to the rescue when family behavioral models are non-existent or outdated. A key challenge on active model learning is to detect commonalities and variability efficiently and combine them into concise family models. Benchmarks and their as…
▽ More
Behavioral models are the key enablers for behavioral analysis of Software Product Lines (SPL), including testing and model checking. Active model learning comes to the rescue when family behavioral models are non-existent or outdated. A key challenge on active model learning is to detect commonalities and variability efficiently and combine them into concise family models. Benchmarks and their associated metrics will play a key role in sha** the research agenda in this promising field and provide an effective means for comparing and identifying relative strengths and weaknesses in the forthcoming techniques. In this challenge, we seek benchmarks to evaluate the efficiency (e.g., learning time and memory footprint) and effectiveness (e.g., conciseness and accuracy of family models) of active model learning methods in the software product line context. These benchmark sets must contain the structural and behavioral variability models of at least one SPL. Each SPL in a benchmark must contain products that requires more than one round of model learning with respect to the basic active learning $L^{*}$ algorithm. Alternatively, tools supporting the synthesis of artificial benchmark models are also welcome.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Diversified and Compatible Web APIs Recommendation in IoT
Authors:
Wenwen Gong,
Hui** Wu,
Xiaokang Wang,
Xuyun Zhang,
Yawei Wang,
Yifei Chen,
Mohammad R. Khosravi
Abstract:
With the ever-increasing popularity of Service-oriented Architecture (SoA) and Internet of Things (IoT), a considerable number of enterprises or organizations are attempting to encapsulate their provided complex business services into various lightweight and accessible web APIs (application programming interfaces) with diverse functions. In this situation, a software developer can select a group o…
▽ More
With the ever-increasing popularity of Service-oriented Architecture (SoA) and Internet of Things (IoT), a considerable number of enterprises or organizations are attempting to encapsulate their provided complex business services into various lightweight and accessible web APIs (application programming interfaces) with diverse functions. In this situation, a software developer can select a group of preferred web APIs from a massive number of candidates to create a complex mashup economically and quickly based on the keywords typed by the developer. However, traditional keyword-based web API search approaches often suffer from the following difficulties and challenges. First, they often focus more on the functional matching between the candidate web APIs and the mashup to be developed while neglecting the compatibility among different APIs, which probably returns a group of incompatible web APIs and further leads to a mashup development failure. Second, existing approaches often return a web API composition solution to the mashup developer for reference, which narrows the developer's API selection scope considerably and may reduce developer satisfaction heavily. In view of the above challenges and successful application of game theory in the IoT, based on the idea of game theory, we propose a compatible and diverse web APIs recommendation approach for mashup creations, named MCCOMP+DIV, to return multiple sets of diverse and compatible web APIs with higher success rate. Finally, we validate the effectiveness and efficiency of MCCOMP+DIV through a set of experiments based on a real-world web API dataset, i.e., the PW dataset crawled from ProgrammableWeb.com.
△ Less
Submitted 11 August, 2021; v1 submitted 22 July, 2021;
originally announced July 2021.
-
Verification of Asynchronous Systems with an Unspecified Component
Authors:
Rosa Abbasi,
Fatemeh Ghassemi,
Ramtin Khosravi
Abstract:
Component-based systems evolve as a new component is added or an existing one is replaced by a newer version. Hence, it is appealing to assure the new system still preserves its safety properties. However, instead of inspecting the new system as a whole, which may result in a large state space, it is beneficial to reuse the verification results by inspecting the newly added component in isolation.…
▽ More
Component-based systems evolve as a new component is added or an existing one is replaced by a newer version. Hence, it is appealing to assure the new system still preserves its safety properties. However, instead of inspecting the new system as a whole, which may result in a large state space, it is beneficial to reuse the verification results by inspecting the newly added component in isolation. To this aim, we study the problem of model checking component-based asynchronously communicating systems in the presence of an unspecified component against safety properties. Our solution is based on assume-guarantee reasoning, adopted for asynchronous environments, which generates the weakest assumption. If the newly added component conforms to the assumption, then the whole system still satisfies the property. To make the approach efficient and convergent, we produce an overapproximated interface of the missing component and by its composition with the rest of the system components, we achieve an overapproximated specification of the system, from which we remove those traces of the system that violate the property and generate an assumption for the missing component.
We have implemented our approach on two case studies. Furthermore, we compared our results with the state of the art direct approach. Our resulting assumptions are smaller in size and achieved faster.
△ Less
Submitted 11 September, 2017;
originally announced September 2017.
-
A New Pseudo-color Technique Based on Intensity Information Protection for Passive Sensor Imagery
Authors:
Mohammad Reza Khosravi,
Habib Rostami,
Gholam Reza Ahmadi,
Suleiman Mansouri,
Ahmad Keshavarz
Abstract:
Remote sensing image processing is so important in geo-sciences. Images which are obtained by different types of sensors might initially be unrecognizable. To make an acceptable visual perception in the images, some pre-processing steps (for removing noises and etc) are preformed which they affect the analysis of images. There are different types of processing according to the types of remote sens…
▽ More
Remote sensing image processing is so important in geo-sciences. Images which are obtained by different types of sensors might initially be unrecognizable. To make an acceptable visual perception in the images, some pre-processing steps (for removing noises and etc) are preformed which they affect the analysis of images. There are different types of processing according to the types of remote sensing images. The method that we are going to introduce in this paper is to use virtual colors to colorize the gray-scale images of satellite sensors. This approach helps us to have a better analysis on a sample single-band image which has been taken by Landsat-8 (OLI) sensor (as a multi-band sensor with natural color bands, its images' natural color can be compared to synthetic color by our approach). A good feature of this method is the original image reversibility in order to keep the suitable resolution of output images.
△ Less
Submitted 8 April, 2017;
originally announced April 2017.
-
Theoretical Evaluation of Li et al.'s Approach for Improving a Binary Watermark-Based Scheme in Remote Sensing Data Communications
Authors:
Mohammad Reza Khosravi,
Mohammad Kazem Moghimi
Abstract:
This letter is about a principal weakness of the published article by Li et al. in 2014. It seems that the mentioned work has a terrible conceptual mistake while presenting its theoretical approach. In fact, the work has tried to design a new attack and its effective solution for a basic watermarking algorithm by Zhu et al. published in 2013, however in practice, we show the Li et al.'s approach i…
▽ More
This letter is about a principal weakness of the published article by Li et al. in 2014. It seems that the mentioned work has a terrible conceptual mistake while presenting its theoretical approach. In fact, the work has tried to design a new attack and its effective solution for a basic watermarking algorithm by Zhu et al. published in 2013, however in practice, we show the Li et al.'s approach is not correct to obtain the aim. For disproof of the incorrect approach, we only apply a numerical example as the counterexample of the Li et al.'s approach.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
A Survey on Underwater Acoustic Sensor Networks: Perspectives on Protocol Design for Signaling, MAC and Routing
Authors:
Mohammad Sharif-Yazd,
Mohammad Reza Khosravi,
Mohammad Kazem Moghimi
Abstract:
Underwater acoustic sensor networks (UASNs) are often used for environmental and industrial sensing in undersea/ocean space, therefore, these networks are also named underwater wireless sensor networks (UWSNs). Underwater sensor networks are different from other sensor networks due to the acoustic channel used in their physical layer, thus we should discuss about the specific features of these und…
▽ More
Underwater acoustic sensor networks (UASNs) are often used for environmental and industrial sensing in undersea/ocean space, therefore, these networks are also named underwater wireless sensor networks (UWSNs). Underwater sensor networks are different from other sensor networks due to the acoustic channel used in their physical layer, thus we should discuss about the specific features of these underwater networks such as acoustic channel modeling and protocol design for different layers of open system interconnection (OSI) model. Each node of these networks as a sensor needs to exchange data with other nodes; however, complexity of the acoustic channel makes some challenges in practice, especially when we are designing the network protocols. Therefore based on the mentioned cases, we are going to review general issues of the design of a UASN in this paper. In this regard, we firstly describe the network architecture for a typical 3D UASN, then we review the characteristics of the acoustic channel and the corresponding challenges of it and finally, we discuss about the different layers e.g. MAC protocols, routing protocols, and signal processing for the application layer of UASNs.
△ Less
Submitted 25 March, 2019; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Modeling and Efficient Verification of Wireless Ad hoc Networks
Authors:
Behnaz Yousefi,
Fatemeh Ghassemi,
Ramtin Khosravi
Abstract:
Wireless ad hoc networks, in particular mobile ad hoc networks (MANETs), are growing very fast as they make communication easier and more available. However, their protocols tend to be difficult to design due to topology dependent behavior of wireless communication, and their distributed and adaptive operations to topology dynamism. Therefore, it is desirable to have them modeled and verified usin…
▽ More
Wireless ad hoc networks, in particular mobile ad hoc networks (MANETs), are growing very fast as they make communication easier and more available. However, their protocols tend to be difficult to design due to topology dependent behavior of wireless communication, and their distributed and adaptive operations to topology dynamism. Therefore, it is desirable to have them modeled and verified using formal methods. In this paper, we present an actor-based modeling language with the aim to model MANETs. We address main challenges of modeling wireless ad hoc networks such as local broadcast, underlying topology, and its changes, and discuss how they can be efficiently modeled at the semantic level to make their verification amenable. The new framework abstracts the data link layer services by providing asynchronous (local) broadcast and unicast communication, while message delivery is in order and is guaranteed for connected receivers. We illustrate the applicability of our framework through two routing protocols, namely flooding and AODVv2-11, and show how efficiently their state spaces can be reduced by the proposed techniques. Furthermore, we demonstrate a loop formation scenario in AODV, found by our analysis tool.
△ Less
Submitted 17 April, 2017; v1 submitted 25 April, 2016;
originally announced April 2016.
-
MRF-Based Multispectral Image Fusion Using an Adaptive Approach Based on Edge-Guided Interpolation
Authors:
Mohammad Reza Khosravi,
Mohammad Sharif-Yazd,
Mohammad Kazem Moghimi,
Ahmad Keshavarz,
Habib Rostami,
Suleiman Mansouri
Abstract:
In interpretation of remote sensing images, it is possible that some images which are supplied by different sensors become incomprehensible. For better visual perception of these images, it is essential to operate series of pre-processing and elementary corrections and then operate a series of main processing steps for more precise analysis on the images. There are several approaches for processin…
▽ More
In interpretation of remote sensing images, it is possible that some images which are supplied by different sensors become incomprehensible. For better visual perception of these images, it is essential to operate series of pre-processing and elementary corrections and then operate a series of main processing steps for more precise analysis on the images. There are several approaches for processing which are depended on the type of remote sensing images. The discussed approach in this article, i.e. image fusion, is the use of natural colors of an optical image for adding color to a grayscale satellite image which gives us the ability for better observation of the HR image of OLI sensor of Landsat-8. This process with emphasis on details of fusion technique has previously been performed; however, we are going to apply the concept of the interpolation process. In fact, we see many important software tools such as ENVI and ERDAS as the most famous remote sensing image processing tools have only classical interpolation techniques (such as bi-linear (BL) and bi-cubic/cubic convolution (CC)). Therefore, ENVI- and ERDAS-based researches in image fusion area and even other fusion researches often dont use new and better interpolators and are mainly concentrated on the fusion algorithms details for achieving a better quality, so we only focus on the interpolation impact on fusion quality in Landsat-8 multispectral images. The important feature of this approach is to use a statistical, adaptive, and edge-guided interpolation method for improving the color quality in the images in practice. Numerical simulations show selecting the suitable interpolation techniques in MRF-based images creates better quality than the classical interpolators.
△ Less
Submitted 24 April, 2019; v1 submitted 28 December, 2015;
originally announced December 2015.
