Showing 1–7 of 7 results for author: Kaufman, D M

Subspace Mixed-FEM for Real-Time Heterogeneous Elastodynamics

Authors: Ty Trusty, Otman Benchekroun, Eitan Grinspun, Danny M. Kaufman, David I. W. Levin

Abstract: We propose a reduced space mixed finite element method (MFEM) built on a Skinning Eigenmode subspace and material-aware cubature scheme. Our solver is well-suited for simulating scenes with large material and geometric heterogeneities in real-time. This mammoth geometry is composed of 98,175 vertices and 531,565 tetrahedral elements and with a heterogenous composition of widely varying materials o… ▽ More We propose a reduced space mixed finite element method (MFEM) built on a Skinning Eigenmode subspace and material-aware cubature scheme. Our solver is well-suited for simulating scenes with large material and geometric heterogeneities in real-time. This mammoth geometry is composed of 98,175 vertices and 531,565 tetrahedral elements and with a heterogenous composition of widely varying materials of muscles ($E= 5\times10^5$ Pa), joints ($E=1\times10^5$ Pa), and bone ($E=1\times10^{10}$ Pa). The resulting simulation runs at 120 frames per second (FPS). △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: 10 pages, 15 figures

Mixed Variational Finite Elements for Implicit, General-Purpose Simulation of Deformables

Authors: Ty Trusty, Danny M. Kaufman, David I W Levin

Abstract: We propose and explore a new, general-purpose method for the implicit time integration of elastica. Key to our approach is the use of a mixed variational principle. In turn its finite element discretization leads to an efficient alternating projections solver with a superset of the desirable properties of many previous fast solution strategies. This framework fits a range of elastic constitutive m… ▽ More We propose and explore a new, general-purpose method for the implicit time integration of elastica. Key to our approach is the use of a mixed variational principle. In turn its finite element discretization leads to an efficient alternating projections solver with a superset of the desirable properties of many previous fast solution strategies. This framework fits a range of elastic constitutive models and remains stable across a wide span of timestep sizes, material parameters (including problems that are quasi-static and approximately rigid). It is efficient to evaluate and easily applicable to volume, surface, and rods models. We demonstrate the efficacy of our approach on a number of simulated examples across all three codomains. △ Less

Submitted 2 February, 2022; v1 submitted 31 January, 2022; originally announced February 2022.

Affine Body Dynamics: Fast, Stable & Intersection-free Simulation of Stiff Materials

Authors: Lei Lan, Danny M. Kaufman, Minchen Li, Chenfanfu Jiang, Yin Yang

Abstract: Simulating stiff materials in applications where deformations are either not significant or can safely be ignored is a pivotal task across fields. Rigid body modeling has thus long remained a fundamental tool and is, by far, the most popular simulation strategy currently employed for modeling stiff solids. At the same time, numerical models of a rigid body continue to pose a number of known challe… ▽ More Simulating stiff materials in applications where deformations are either not significant or can safely be ignored is a pivotal task across fields. Rigid body modeling has thus long remained a fundamental tool and is, by far, the most popular simulation strategy currently employed for modeling stiff solids. At the same time, numerical models of a rigid body continue to pose a number of known challenges and trade-offs including intersections, instabilities, inaccuracies, and/or slow performances that grow with contact-problem complexity. In this paper we revisit this problem and present ABD, a simple and highly effective affine body dynamics framework, which significantly improves state-of-the-art stiff simulations. We trace the challenges in the rigid-body IPC (incremental potential contact) method to the necessity of linearizing piecewise-rigid (SE(3)) trajectories and subsequent constraints. ABD instead relaxes the unnecessary (and unrealistic) constraint that each body's motion be exactly rigid with a stiff orthogonality potential, while preserving the rigid body model's key feature of a small coordinate representation. In doing so ABD replaces piecewise linearization with piecewise linear trajectories. This, in turn, combines the best from both parties: compact coordinates ensure small, sparse system solves, while piecewise-linear trajectories enable efficient and accurate constraint (contact and joint) evaluations. Beginning with this simple foundation, ABD preserves all guarantees of the underlying IPC model e.g., solution convergence, guaranteed non-intersection, and accurate frictional contact. Over a wide range and scale of simulation problems we demonstrate that ABD brings orders of magnitude performance gains (two- to three-order on the CPU and an order more utilizing the GPU, which is 10,000x speedups) over prior IPC-based methods with a similar or higher simulation quality. △ Less

Submitted 31 January, 2022; v1 submitted 24 January, 2022; originally announced January 2022.

Codimensional Incremental Potential Contact

Authors: Minchen Li, Danny M. Kaufman, Chenfanfu Jiang

Abstract: We extend the incremental potential contact (IPC) model for contacting elastodynamics to resolve systems composed of codimensional DOFs in arbitrary combination. This enables a unified, interpenetration-free, robust, and stable simulation framework that couples codimension-0,1,2, and 3 geometries seamlessly with frictional contact. Extending IPC to thin structures poses new challenges in computing… ▽ More We extend the incremental potential contact (IPC) model for contacting elastodynamics to resolve systems composed of codimensional DOFs in arbitrary combination. This enables a unified, interpenetration-free, robust, and stable simulation framework that couples codimension-0,1,2, and 3 geometries seamlessly with frictional contact. Extending IPC to thin structures poses new challenges in computing strain, modeling thickness and determining collisions. To address these challenges we propose three corresponding contributions. First, we introduce a C2 constitutive barrier model that directly enforces strain limiting as an energy potential while preserving rest state. This provides energetically-consistent strain limiting models (both isotropic and anisotropic) for cloth that enable strict satisfaction of strain-limit inequalities with direct coupling to both elastodynamics and contact via minimization of the incremental potential. Second, to capture the geometric thickness of codimensional domains we extend the IPC model to directly enforce distance offsets. Our treatment imposes a strict guarantee that mid-surfaces (resp. mid-lines) of shells (resp. rods) will not move closer than applied thickness values. This enables us to account for thickness in the contact behavior of codimensional structures and so robustly capture challenging contacting geometries; a number of which, to our knowledge, have not been simulated before. Third, codimensional models, especially with modeled thickness, mandate strict accuracy requirements that pose a severe challenge to all existing continuous collision detection (CCD) methods. To address these limitations we develop a new, efficient, simple-to-implement additive CCD (ACCD) method that applies conservative advancement to iteratively refine a lower bound for deforming primitives, converging to time of impact. △ Less

Submitted 5 May, 2021; v1 submitted 7 December, 2020; originally announced December 2020.

Hierarchical Optimization Time Integration for CFL-rate MPM Step**

Authors: Xinlei Wang, Minchen Li, Yu Fang, Xinxin Zhang, Ming Gao, Min Tang, Danny M. Kaufman, Chenfanfu Jiang

Abstract: We propose Hierarchical Optimization Time Integration (HOT) for efficient implicit time-step** of the Material Point Method (MPM) irrespective of simulated materials and conditions. HOT is an MPM-specialized hierarchical optimization algorithm that solves nonlinear time step problems for large-scale MPM systems near the CFL-limit. HOT provides convergent simulations "out-of-the-box" across widel… ▽ More We propose Hierarchical Optimization Time Integration (HOT) for efficient implicit time-step** of the Material Point Method (MPM) irrespective of simulated materials and conditions. HOT is an MPM-specialized hierarchical optimization algorithm that solves nonlinear time step problems for large-scale MPM systems near the CFL-limit. HOT provides convergent simulations "out-of-the-box" across widely varying materials and computational resolutions without parameter tuning. As an implicit MPM time stepper accelerated by a custom-designed Galerkin multigrid wrapped in a quasi-Newton solver, HOT is both highly parallelizable and robustly convergent. As we show in our analysis, HOT maintains consistent and efficient performance even as we grow stiffness, increase deformation, and vary materials over a wide range of finite strain, elastodynamic and plastic examples. Through careful benchmark ablation studies, we compare the effectiveness of HOT against seemingly plausible alternative combinations of MPM with standard multigrid and other Newton-Krylov models. We show how these alternative designs result in severe issues and poor performance. In contrast, HOT outperforms the existing state-of-the-art, heavily optimized implicit MPM codes with an up to 10x performance speedup across a wide range of challenging benchmark test simulations. △ Less

Submitted 28 March, 2020; v1 submitted 18 November, 2019; originally announced November 2019.

Journal ref: ACM Transactions on Graphics 2020

Neural Re-Simulation for Generating Bounces in Single Images

Authors: Carlo Innamorati, Bryan Russell, Danny M. Kaufman, and Niloy J. Mitra

Abstract: We introduce a method to generate videos of dynamic virtual objects plausibly interacting via collisions with a still image's environment. Given a starting trajectory, physically simulated with the estimated geometry of a single, static input image, we learn to 'correct' this trajectory to a visually plausible one via a neural network. The neural network can then be seen as learning to 'correct' t… ▽ More We introduce a method to generate videos of dynamic virtual objects plausibly interacting via collisions with a still image's environment. Given a starting trajectory, physically simulated with the estimated geometry of a single, static input image, we learn to 'correct' this trajectory to a visually plausible one via a neural network. The neural network can then be seen as learning to 'correct' traditional simulation output, generated with incomplete and imprecise world information, to obtain context-specific, visually plausible re-simulated output, a process we call neural re-simulation. We train our system on a set of 50k synthetic scenes where a virtual moving object (ball) has been physically simulated. We demonstrate our approach on both our synthetic dataset and a collection of real-life images depicting everyday scenes, obtaining consistent improvement over baseline alternatives throughout. △ Less

Submitted 24 August, 2019; v1 submitted 16 August, 2019; originally announced August 2019.

Comments: Accepted to ICCV 2019

MSC Class: 68T45 ACM Class: I.4.9

Bounce and Learn: Modeling Scene Dynamics with Real-World Bounces

Authors: Senthil Purushwalkam, Abhinav Gupta, Danny M. Kaufman, Bryan Russell

Abstract: We introduce an approach to model surface properties governing bounces in everyday scenes. Our model learns end-to-end, starting from sensor inputs, to predict post-bounce trajectories and infer two underlying physical properties that govern bouncing - restitution and effective collision normals. Our model, Bounce and Learn, comprises two modules -- a Physics Inference Module (PIM) and a Visual In… ▽ More We introduce an approach to model surface properties governing bounces in everyday scenes. Our model learns end-to-end, starting from sensor inputs, to predict post-bounce trajectories and infer two underlying physical properties that govern bouncing - restitution and effective collision normals. Our model, Bounce and Learn, comprises two modules -- a Physics Inference Module (PIM) and a Visual Inference Module (VIM). VIM learns to infer physical parameters for locations in a scene given a single still image, while PIM learns to model physical interactions for the prediction task given physical parameters and observed pre-collision 3D trajectories. To achieve our results, we introduce the Bounce Dataset comprising 5K RGB-D videos of bouncing trajectories of a foam ball to probe surfaces of varying shapes and materials in everyday scenes including homes and offices. Our proposed model learns from our collected dataset of real-world bounces and is bootstrapped with additional information from simple physics simulations. We show on our newly collected dataset that our model out-performs baselines, including trajectory fitting with Newtonian physics, in predicting post-bounce trajectories and inferring physical properties of a scene. △ Less

Submitted 14 April, 2019; originally announced April 2019.

Comments: Accepted for publication at the International Conference on Learning Representations (ICLR) 2019