-
Location-Aided Pilot Contamination Avoidance for Massive MIMO Systems
Authors:
L. Srikar Muppirisetty,
Themistoklis Charalambous,
Johnny Karout,
Gabor Fodor,
Henk Wymeersch
Abstract:
Pilot contamination, defined as the interference during the channel estimation process due to reusing the same pilot sequences in neighboring cells, can severely degrade the performance of massive multiple-input multiple-output systems. In this paper, we propose a location-based approach to mitigating the pilot contamination problem for uplink multiple-input multiple-output systems. Our approach m…
▽ More
Pilot contamination, defined as the interference during the channel estimation process due to reusing the same pilot sequences in neighboring cells, can severely degrade the performance of massive multiple-input multiple-output systems. In this paper, we propose a location-based approach to mitigating the pilot contamination problem for uplink multiple-input multiple-output systems. Our approach makes use of the approximate locations of mobile devices to provide good estimates of the channel statistics between the mobile devices and their corresponding base stations. Specifically, we aim at avoiding pilot contamination even when the number of base station antennas is not very large, and when multiple users from different cells, or even in the same cell, are assigned the same pilot sequence. First, we characterize a desired angular region of the target user at the serving base station based on the number of base station antennas and the location of the target user, and make the observation that in this region the interference is close to zero due to the spatial separability. Second, based on this observation, we propose pilot coordination methods for multi-user multi-cell scenarios to avoid pilot contamination. The numerical results indicate that the proposed pilot contamination avoidance schemes enhance the quality of the channel estimation and thereby improve the per-cell sum rate offered by target base stations.
△ Less
Submitted 3 June, 2018; v1 submitted 8 October, 2016;
originally announced October 2016.
-
Achievable Rates of Multidimensional Rotationally Invariant Distributions
Authors:
Johnny Karout,
Rene'-Jean Essiambre,
Erik Agrell,
Antonia Tulino
Abstract:
The maximum achievable rate or mutual informa- tion of multidimensional rotationally invariant distributions in the presence of additive white Gaussian noise is analyzed. A simple expression for the special case of multisphere distributions is derived. Such distributions consist of points in a multidimensional Euclidean space that are uniformly distributed over several multidimensional concentric…
▽ More
The maximum achievable rate or mutual informa- tion of multidimensional rotationally invariant distributions in the presence of additive white Gaussian noise is analyzed. A simple expression for the special case of multisphere distributions is derived. Such distributions consist of points in a multidimensional Euclidean space that are uniformly distributed over several multidimensional concentric hyperspheres. For the 2-dimensional case, such distributions have been previously considered in order to reduce the computational complexity of finding a bound on the channel capacity of fiber-optic channels. These distributions take advantage of the statistical rotational invariance of the noise and nonlinear distortions in fiber-optic channels. Using the derived mutual information expression, 2- and 4-dimensional multisphere distributions are compared for fiber-optic dual-polarization channels dominated by linear noise. At high signal-to-noise ratios, 4-dimensional multisphere distributions offer higher achievable rates than 2-dimensional ones transmitted on each of the two polarizations of the optical carrier. Such 4-dimensional multisphere distributions are also shown to be statistically invariant under 4-dimensional nonlinear transmission in fibers.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.
-
A Two-Dimensional Signal Space for Intensity-Modulated Channels
Authors:
Johnny Karout,
Gerhard Kramer,
Frank R. Kschischang,
Erik Agrell
Abstract:
A two-dimensional signal space for intensity- modulated channels is presented. Modulation formats using this signal space are designed to maximize the minimum distance between signal points while satisfying average and peak power constraints. The uncoded, high-signal-to-noise ratio, power and spectral efficiencies are compared to those of the best known formats. The new formats are simpler than ex…
▽ More
A two-dimensional signal space for intensity- modulated channels is presented. Modulation formats using this signal space are designed to maximize the minimum distance between signal points while satisfying average and peak power constraints. The uncoded, high-signal-to-noise ratio, power and spectral efficiencies are compared to those of the best known formats. The new formats are simpler than existing subcarrier formats, and are superior if the bandwidth is measured as 90% in-band power. Existing subcarrier formats are better if the bandwidth is measured as 99% in-band power.
△ Less
Submitted 7 March, 2012;
originally announced March 2012.
-
Bandlimited Intensity Modulation
Authors:
Mehrnaz Tavan,
Erik Agrell,
Johnny Karout
Abstract:
In this paper, the design and analysis of a new bandwidth-efficient signaling method over the bandlimited intensity-modulated direct-detection (IM/DD) channel is presented. The channel can be modeled as a bandlimited channel with nonnegative input and additive white Gaussian noise (AWGN). Due to the nonnegativity constraint, standard methods for coherent bandlimited channels cannot be applied here…
▽ More
In this paper, the design and analysis of a new bandwidth-efficient signaling method over the bandlimited intensity-modulated direct-detection (IM/DD) channel is presented. The channel can be modeled as a bandlimited channel with nonnegative input and additive white Gaussian noise (AWGN). Due to the nonnegativity constraint, standard methods for coherent bandlimited channels cannot be applied here. Previously established techniques for the IM/DD channel require bandwidth twice the required bandwidth over the conventional coherent channel. We propose a method to transmit without intersymbol interference in a bandwidth no larger than the bit rate. This is done by combining Nyquist or root-Nyquist pulses with a constant bias and using higher-order modulation formats. In fact, we can transmit with a bandwidth equal to that of coherent transmission. A trade-off between the required average optical power and the bandwidth is investigated. Depending on the bandwidth required, the most power-efficient transmission is obtained by the parametric linear pulse, the so-called "better than Nyquist" pulse, or the root-raised cosine pulse.
△ Less
Submitted 1 March, 2012; v1 submitted 21 September, 2011;
originally announced September 2011.
-
Optimizing Constellations for Single-Subcarrier Intensity-Modulated Optical Systems
Authors:
Johnny Karout,
Erik Agrell,
Krzysztof Szczerba,
Magnus Karlsson
Abstract:
We optimize modulation formats for the additive white Gaussian noise channel with nonnegative input, also known as the intensity-modulated direct-detection channel, with and without confining them to a lattice structure. Our optimization criteria are the average electrical, average optical, and peak power. The nonnegative constraint on the input to the channel is translated into a conical constrai…
▽ More
We optimize modulation formats for the additive white Gaussian noise channel with nonnegative input, also known as the intensity-modulated direct-detection channel, with and without confining them to a lattice structure. Our optimization criteria are the average electrical, average optical, and peak power. The nonnegative constraint on the input to the channel is translated into a conical constraint in signal space, and modulation formats are designed by sphere packing inside this cone. Some dense packings are found, which yield more power-efficient modulation formats than previously known. For example, at a spectral efficiency of 1.5 bit/s/Hz, the modulation format optimized for average electrical power has a 2.55 dB average electrical power gain over the best known format to achieve a symbol error rate of 10^-6. The corresponding gains for formats optimized for average and peak optical power are 1.35 and 1.72 dB, respectively. Using modulation formats optimized for peak power in average-power limited systems results in a smaller power penalty than when using formats optimized for average power in peak-power limited systems. We also evaluate the modulation formats in terms of their mutual information to predict their performance in the presence of capacity-achieving error- correcting codes, and finally show numerically and analytically that the optimal modulation formats for reliable transmission in the wideband regime have only one nonzero point.
△ Less
Submitted 7 February, 2012; v1 submitted 14 June, 2011;
originally announced June 2011.
-
Designing Power-Efficient Modulation Formats for Noncoherent Optical Systems
Authors:
Johnny Karout,
Erik Agrell,
Krzysztof Szczerba,
Magnus Karlsson
Abstract:
We optimize modulation formats for the additive white Gaussian noise channel with a nonnegative input constraint, also known as the intensity-modulated direct detection channel, with and without confining them to a lattice structure. Our optimization criteria are the average electrical and optical power. The nonnegativity input signal constraint is translated into a conical constraint in signal sp…
▽ More
We optimize modulation formats for the additive white Gaussian noise channel with a nonnegative input constraint, also known as the intensity-modulated direct detection channel, with and without confining them to a lattice structure. Our optimization criteria are the average electrical and optical power. The nonnegativity input signal constraint is translated into a conical constraint in signal space, and modulation formats are designed by sphere packing inside this cone. Some remarkably dense packings are found, which yield more power-efficient modulation formats than previously known. For example, at a spectral efficiency of 1 bit/s/Hz, the obtained modulation format offers a 0.86 dB average electrical power gain and 0.43 dB average optical power gain over the previously best known modulation formats to achieve a symbol error rate of 10^-6. This modulation turns out to have a lattice-based structure. At a spectral efficiency of 3/2 bits/s/Hz and to achieve a symbol error rate of 10^-6, the modulation format obtained for optimizing the average electrical power offers a 0.58 dB average electrical power gain over the best lattice-based modulation and 2.55 dB gain over the best previously known format. However, the modulation format optimized for average optical power offers a 0.46 dB average optical power gain over the best lattice-based modulation and 1.35 dB gain over the best previously known format.
△ Less
Submitted 11 March, 2011;
originally announced March 2011.
