-
Calibration of NYURay, a 3D mmWave and sub-THz Ray Tracer using Indoor, Outdoor, and Factory Channel Measurements
Authors:
O. Kanhere,
T. S. Rappaport
Abstract:
Ray tracing is a powerful tool that can be used to predict wireless channel characteristics, reducing the need for extensive channel measurements for channel characterization, evaluation of performance of sensing applications such as position location, and wireless network deployment. In this work, NYURay, a 3D mmWave and sub-THz ray tracer, is introduced, which is calibrated to wireless channel p…
▽ More
Ray tracing is a powerful tool that can be used to predict wireless channel characteristics, reducing the need for extensive channel measurements for channel characterization, evaluation of performance of sensing applications such as position location, and wireless network deployment. In this work, NYURay, a 3D mmWave and sub-THz ray tracer, is introduced, which is calibrated to wireless channel propagation measurements conducted at 28, 73, and 140 GHz, in indoor office, outdoor, and factory environments. We present an accurate yet low-complexity calibration procedure to obtain electrical properties of materials in any environment by modeling the reflection coefficient of building materials to be independent of the angle of incidence, a simplification shown to be quite effective in [1] over 30 years ago. We show that after calibration, NYURay can accurately predict individual directional multipath signal power. The standard deviation in the error of the directional multipath power predicted by the ray tracer compared to the directional measured power was less than 3 dB in indoor office environments and less than 2 dB in outdoor and factory environments.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
A Power Efficiency Metric for Comparing Energy Consumption in Future Wireless Networks in the Millimeter Wave and Terahertz bands
Authors:
O. Kanhere,
H. Poddar,
Y. Xing,
D. Shakya,
S. Ju,
T. S. Rappaport
Abstract:
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will require attention to sustainability and reduction of power whenever possible to reduce the carbon footprint while maintaining adequate battery life for the mass…
▽ More
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will require attention to sustainability and reduction of power whenever possible to reduce the carbon footprint while maintaining adequate battery life for the massive number of resource-constrained devices to be deployed. This article analyzes power consumption of future wireless networks using a new metric, the power waste factor ($ W $), which shows promise for the study and development of "green G" - green technology for future wireless networks. Using $ W $, power efficiency can be considered by quantifying the power wasted by all devices on a signal path in a cascade. We then show that the consumption efficiency factor ($CEF$), defined as the ratio of the maximum data rate achieved to the total power consumed, is a novel and powerful measure of power efficiency that shows less energy per bit is expended as the cell size shrinks and carrier frequency and channel bandwidth increase. Our findings offer a standard approach to calculating and comparing power consumption and energy efficiency.
△ Less
Submitted 14 January, 2023; v1 submitted 10 September, 2022;
originally announced September 2022.
-
A Real-Time Millimeter Wave V2V Channel Sounder
Authors:
Aditya Chopra,
Andrew Thornburg,
Ojas Kanhere,
Saeed S. Ghassemzadeh,
Milap Majmundar,
Theodore S. Rappaport
Abstract:
Wireless communication in millimeter wave spectrum is poised to provide the latency and bandwidth needed for advanced use cases unfeasible at lower frequencies. Despite the market potential of vehicular communication networks, investigations into the millimeter wave vehicular channel are lacking. In this paper, we present a detailed overview of a novel 1 GHz wide, multi-antenna vehicle to vehicle…
▽ More
Wireless communication in millimeter wave spectrum is poised to provide the latency and bandwidth needed for advanced use cases unfeasible at lower frequencies. Despite the market potential of vehicular communication networks, investigations into the millimeter wave vehicular channel are lacking. In this paper, we present a detailed overview of a novel 1 GHz wide, multi-antenna vehicle to vehicle directional channel sounding and measurement platform operating at 28 GHz. The channel sounder uses two 256-element phased arrays at the transmitter vehicle and four 64-element arrays at the receiver vehicle, with the receiver measuring 116 different directional beams in less than 1 millisecond. By measuring the full multi-beam channel impulse response at large bandwidths, our system provides unprecedented insight in instantaneous mobile vehicle to vehicle channels. The system also uses centimeter-level global position tracking and 360 degree video capture to provide additional contextual information for joint communication and sensing applications. An initial measurement campaign was conducted on highway and surface streets in Austin, Texas. We show example data that highlights the sensing capability of the system. Preliminary results from the measurement campaign show that bumper mounted mmWave arrays provide rich scattering in traffic as well a provide significant directional diversity aiding towards high reliability vehicular communication. Additionally, potential waveguide effects from high traffic in lanes can also extend the range of mmWave signals significantly.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Sub-Terahertz Wireless Coverage Analysis at 142 GHz in Urban Microcell
Authors:
Yunchou Xing,
Ojas Kanhere,
Shihao Ju,
Theodore S. Rappaport
Abstract:
Small-cell cellular base stations are going to be used for mmWave and sub-THz communication systems to provide multi-Gbps data rates and reliable coverage to mobile users. This paper analyzes the base station coverage of sub-THz communication systems and the system performance in terms of spectral efficiency through Monte Carlo simulations for both single-cell and multi-cell cases. The simulations…
▽ More
Small-cell cellular base stations are going to be used for mmWave and sub-THz communication systems to provide multi-Gbps data rates and reliable coverage to mobile users. This paper analyzes the base station coverage of sub-THz communication systems and the system performance in terms of spectral efficiency through Monte Carlo simulations for both single-cell and multi-cell cases. The simulations are based on realistic channel models derived from outdoor field measurements at 142 GHz in urban microcell (UMi) environments conducted in downtown Brooklyn, New York. The single-cell base station can provide a downlink coverage area with a radius of 200 m and the 7-cell system can provide a downlink coverage area with a radius of 400 m at 142 GHz. Using a 1 GHz downlink bandwidth and 100 MHz uplink bandwidth, the 7-cell system can provide about 4.5 Gbps downlink average data rate and 410 Mbps uplink average data rate at 142 GHz.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Millimeter Wave and Sub-Terahertz Spatial Statistical Channel Model for an Indoor Office Building
Authors:
Shihao Ju,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
Millimeter-wave (mmWave) and sub-Terahertz (THz) frequencies are expected to play a vital role in 6G wireless systems and beyond due to the vast available bandwidth of many tens of GHz. This paper presents an indoor 3-D spatial statistical channel model for mmWave and sub-THz frequencies based on extensive radio propagation measurements at 28 and 140 GHz conducted in an indoor office environment f…
▽ More
Millimeter-wave (mmWave) and sub-Terahertz (THz) frequencies are expected to play a vital role in 6G wireless systems and beyond due to the vast available bandwidth of many tens of GHz. This paper presents an indoor 3-D spatial statistical channel model for mmWave and sub-THz frequencies based on extensive radio propagation measurements at 28 and 140 GHz conducted in an indoor office environment from 2014 to 2020. Omnidirectional and directional path loss models and channel statistics such as the number of time clusters, cluster delays, and cluster powers were derived from over 15,000 measured power delay profiles. The resulting channel statistics show that the number of time clusters follows a Poisson distribution and the number of subpaths within each cluster follows a composite exponential distribution for both LOS and NLOS environments at 28 and 140 GHz. This paper proposes a unified indoor statistical channel model for mmWave and sub-Terahertz frequencies following the mathematical framework of the previous outdoor NYUSIM channel models. A corresponding indoor channel simulator is developed, which can recreate 3-D omnidirectional, directional, and multiple input multiple output (MIMO) channels for arbitrary mmWave and sub-THz carrier frequency up to 150 GHz, signal bandwidth, and antenna beamwidth. The presented statistical channel model and simulator will guide future air-interface, beamforming, and transceiver designs for 6G and beyond.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Outdoor sub-THz Position Location and Tracking using Field Measurements at 142 GHz
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
Future sub-THz cellular deployments may be utilized to complement the coverage of the global positioning system (GPS) and provide centimeter-level accuracy. In this work, we use measurement data at 142 GHz to test a map-based position location algorithm in an outdoor urban microcell (UMi) environment. We utilize an extended Kalman filter (EKF) to track the position of the user equipment (UE) along…
▽ More
Future sub-THz cellular deployments may be utilized to complement the coverage of the global positioning system (GPS) and provide centimeter-level accuracy. In this work, we use measurement data at 142 GHz to test a map-based position location algorithm in an outdoor urban microcell (UMi) environment. We utilize an extended Kalman filter (EKF) to track the position of the user equipment (UE) along a rectangular track, with the transmitter-receiver separation distances varying from 24.3 m to 52.8 m. The position and velocity of the UE are tracked by the EKF, with measurements of the angle of arrival and time of flight information obtained along an outdoor track, to provide a mean accuracy of 24.8 cm at 142 GHz, over 34 UE locations, using a single base station in line-of-sight and non-line-of-sight.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Performance Impact Analysis of Beam Switching in Millimeter Wave Vehicular Communications
Authors:
O. Kanhere,
A. Chopra,
A. Thornburg,
T. S. Rappaport,
S. S. Ghassemzadeh
Abstract:
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measur…
▽ More
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measurement data at 28 GHz, we determine the optimal beam swee** period, i.e. the frequency of the channel measurements, to align the RX beams to the best channel directions for maximizing the vehicle-to-infrastructure (V2I) throughput. We show that in a realistic vehicular traffic environment in Austin, TX, for a vehicle traveling at an average speed of 10.5 mph, a beam swee** period of 300 ms in future V2I communication standards would maximize the V2I throughput, using a system of four RX phased arrays that scanned the channel 360 degrees in the azimuth and 30 degrees above and below the boresight. We also investigate the impact of the number of active RX chains controlling the steerable phased arrays on V2I throughput. Reducing the number of RX chains controlling the phased arrays helps reduce the cost of the vehicular mmWave hardware while multiple RX chains, although more expensive, provide more robustness to beam direction changes at the vehicle, allowing near maximum throughput over a wide range of beam sweep periods. We show that the overhead of utilizing one RX chain instead of four leads to a 10% drop in mean V2I throughput over six non-line-of-sight runs in real traffic conditions, with each run being 10 to 20 seconds long over a distance of 40 to 90 meters.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Target Localization using Bistatic and Multistatic Radar with 5G NR Waveform
Authors:
O. Kanhere,
S. Goyal,
M. Beluri,
T. S. Rappaport
Abstract:
Joint communication and sensing allows the utilization of common spectral resources for communication and localization, reducing the cost of deployment. By using fifth generation (5G) New Radio (NR) (i.e., the 3rd Generation Partnership Project Radio Access Network for 5G) reference signals, conventionally used for communication, this paper shows sub-meter precision localization is possible at mil…
▽ More
Joint communication and sensing allows the utilization of common spectral resources for communication and localization, reducing the cost of deployment. By using fifth generation (5G) New Radio (NR) (i.e., the 3rd Generation Partnership Project Radio Access Network for 5G) reference signals, conventionally used for communication, this paper shows sub-meter precision localization is possible at millimeter wave frequencies. We derive the geometric dilution of precision of a bistatic radar configuration, a theoretical metric that characterizes how the target location estimation error varies as a function of the bistatic geometry and measurement errors. We develop a 5G NR compliant software test bench to characterize the measurement errors when estimating the time difference of arrival and angle of arrival with 5G NR waveforms. The test bench is further utilized to demonstrate the accuracy of target localization and velocity estimation in several indoor and outdoor bistatic and multistatic configurations and to show that on average, the bistatic configuration can achieve a location accuracy of 10.0 cm over a bistatic range of 25 m, which can be further improved by deploying a multistatic radar configuration.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Position Location for Futuristic Cellular Communications -- 5G and Beyond
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
With vast mmWave spectrum and narrow beam antenna technology, precise position location is now possible in 5G and future mobile communication systems. In this article, we describe how centimeterlevel localization accuracy can be achieved, particularly through the use of map-based techniques. We show how data fusion of parallel information streams, machine learning, and cooperative localization tec…
▽ More
With vast mmWave spectrum and narrow beam antenna technology, precise position location is now possible in 5G and future mobile communication systems. In this article, we describe how centimeterlevel localization accuracy can be achieved, particularly through the use of map-based techniques. We show how data fusion of parallel information streams, machine learning, and cooperative localization techniques further improve positioning accuracy.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
3-D Statistical Indoor Channel Model for Millimeter-Wave and Sub-Terahertz Bands
Authors:
Shihao Ju,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
Millimeter-wave (mmWave) and Terahertz (THz) will be used in the sixth-generation (6G) wireless systems, especially for indoor scenarios. This paper presents an indoor three-dimensional (3-D) statistical channel model for mmWave and sub-THz frequencies, which is developed from extensive channel propagation measurements conducted in an office building at 28 GHz and 140 GHz in 2014 and 2019. Over 15…
▽ More
Millimeter-wave (mmWave) and Terahertz (THz) will be used in the sixth-generation (6G) wireless systems, especially for indoor scenarios. This paper presents an indoor three-dimensional (3-D) statistical channel model for mmWave and sub-THz frequencies, which is developed from extensive channel propagation measurements conducted in an office building at 28 GHz and 140 GHz in 2014 and 2019. Over 15,000 power delay profiles (PDPs) were recorded to study channel statistics such as the number of time clusters, cluster delays, and cluster powers. All the parameters required in the channel generation procedure are derived from empirical measurement data for 28 GHz and 140 GHz line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. The channel model is validated by showing that the simulated root mean square (RMS) delay spread and RMS angular spread yield good agreements with measured values. An indoor channel simulation software is built upon the popular NYUSIM outdoor channel simulator, which can generate realistic channel impulse response, PDP, and power angular spectrum.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
Real-time Millimeter Wave Omnidirectional Channel Sounder Using Phased Array Antennas
Authors:
Aditya Chopra,
Andrew Thornburg,
Ojas Kanhere,
Abbas Termos,
Saeed S. Ghassemzadeh,
Theodore S. Rappaport
Abstract:
Characterization of the millimeter wave wireless channel is needed to facilitate fully connected vehicular communication in the future. To study the multipath-rich, rapidly varying nature of the vehicular propagation environment, fast millimeter wave channel sounders are required. We present a channel sounder design capable of covering 360 degrees in azimuth and 60 degrees in elevation with 200 in…
▽ More
Characterization of the millimeter wave wireless channel is needed to facilitate fully connected vehicular communication in the future. To study the multipath-rich, rapidly varying nature of the vehicular propagation environment, fast millimeter wave channel sounders are required. We present a channel sounder design capable of covering 360 degrees in azimuth and 60 degrees in elevation with 200 individual beam directions in 6.25 ms by using four phased arrays simultaneously. The channel measurements are accompanied by high resolution positioning and video data, allowing channel sounding to be conducted while either the transmitter, or the receiver, or both are moving. Channel sounding campaigns were conducted at multiple urban locations with light traffic conditions in Austin, Texas. Preliminary results show that beam selection at the receiver can lower the effective pathloss exponent to 1.6 for line-of-sight and 2.25 for non line-of-sight.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Millimeter Wave Position Location using Multipath Differentiation for 3GPP using Field Measurements
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
3GPP air interface standards support meter-level position location of a user in a cellular network. With wider bandwidths and narrow antenna beamwidths available at mmWave frequencies, cellular networks now have the potential to provide sub-meter position location for each user. In this work, we provide an overview of 3GPP position location techniques that are designed for line-of-sight propagatio…
▽ More
3GPP air interface standards support meter-level position location of a user in a cellular network. With wider bandwidths and narrow antenna beamwidths available at mmWave frequencies, cellular networks now have the potential to provide sub-meter position location for each user. In this work, we provide an overview of 3GPP position location techniques that are designed for line-of-sight propagation. We discuss additional measurements required in the 3GPP standard that enable multipath-based non-line-of-sight position location. Further, we validate the concepts in this paper by using field data to test a map-based position location algorithm in an indoor office environment which has dimensions of 35 m by 65.5 m. We demonstrate how the fusion of angle of arrival and time of flight information in concert with a 3-D map of the office provides a mean accuracy of 5.72 cm at 28 GHz and 6.29 cm at 140 GHz, over 23 receiver distances ranging from 4.2 m to 32.3 m, using a single base station in line-of-sight and non-line-of-sight. We also conduct a theoretical analysis of the typical error experienced in the map-based position location algorithm and show that the complexity of the map-based algorithm is low enough to allow real-time implementation.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Map-Assisted Millimeter Wave Localization for Accurate Position Location
Authors:
Ojas Kanhere,
Shihao Ju,
Yunchou Xing,
Theodore S. Rappaport
Abstract:
Accurate precise positioning at millimeter wave frequencies is possible due to the large available bandwidth that permits precise on-the-fly time of flight measurements using conventional air interface standards. In addition, narrow antenna beamwidths may be used to determine the angles of arrival and departure of the multipath components between the base station and mobile users. By combining acc…
▽ More
Accurate precise positioning at millimeter wave frequencies is possible due to the large available bandwidth that permits precise on-the-fly time of flight measurements using conventional air interface standards. In addition, narrow antenna beamwidths may be used to determine the angles of arrival and departure of the multipath components between the base station and mobile users. By combining accurate temporal and angular information of multipath components with a 3-D map of the environment (that may be built by each user or downloaded a-priori), robust localization is possible, even in non-line-of-sight environments. In this work, we develop an accurate 3-D ray tracer for an indoor office environment and demonstrate how the fusion of angle of departure and time of flight information in concert with a 3-D map of a typical large office environment provides a mean accuracy of 12.6 cm in line-of-sight and 16.3 cm in non-line-of-sight, over 100 receiver distances ranging from 1.5 m to 24.5 m using a single base station. We show how increasing the number of base stations improves the average non-line-of-sight position location accuracy to 5.5 cm at 21 locations with a maximum propagation distance of 24.5 m.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Indoor Wireless Channel Properties at Millimeter Wave and Sub-Terahertz Frequencies
Authors:
Yunchou Xing,
Ojas Kanhere,
Shihao Ju,
Theodore S. Rappaport
Abstract:
This paper provides indoor reflection, scattering, transmission, and large-scale path loss measurements and models, which describe the main propagation mechanisms at millimeter wave and Terahertz frequencies. Channel properties for common building materials (drywall and clear glass) are carefully studied at 28, 73, and 140 GHz using a wideband sliding correlation based channel sounder system with…
▽ More
This paper provides indoor reflection, scattering, transmission, and large-scale path loss measurements and models, which describe the main propagation mechanisms at millimeter wave and Terahertz frequencies. Channel properties for common building materials (drywall and clear glass) are carefully studied at 28, 73, and 140 GHz using a wideband sliding correlation based channel sounder system with rotatable narrow-beam horn antennas. Reflection coefficient is shown to linearly increase as the incident angle increases, and lower reflection loss (e.g., stronger reflections) are observed as frequencies increase for a given incident angle. Although backscatter from drywall is present at 28, 73, and 140 GHz, smooth surfaces (like drywall) are shown to be modeled as a simple reflected surface, since the scattered power is 20 dB or more below the reflected power over the measured range of frequency and angles. Partition loss tends to increase with frequency, but the amount of loss is material dependent. Both clear glass and drywall are shown to induce a depolarizing effect, which becomes more prominent as frequency increases. Indoor propagation measurements and large-scale indoor path loss models at 140 GHz are provided, revealing similar path loss exponent and shadow fading as observed at 28 and 73 GHz. The measurements and models in this paper can be used for future wireless system design and other applications within buildings for frequencies above 100 GHz.
△ Less
Submitted 3 December, 2019; v1 submitted 26 August, 2019;
originally announced August 2019.
-
A Millimeter-Wave Channel Simulator NYUSIM with Spatial Consistency and Human Blockage
Authors:
Shihao Ju,
Ojas Kanhere,
Yunchou Xing,
Theodore S. Rappaport
Abstract:
Accurate channel modeling and simulation are indispensable for millimeter-wave wideband communication systems that employ electrically-steerable and narrow beam antenna arrays. Three important channel modeling components, spatial consistency, human blockage, and outdoor-to-indoor penetration loss, were proposed in the 3rd Generation Partnership Project Release 14 for mmWave communication system de…
▽ More
Accurate channel modeling and simulation are indispensable for millimeter-wave wideband communication systems that employ electrically-steerable and narrow beam antenna arrays. Three important channel modeling components, spatial consistency, human blockage, and outdoor-to-indoor penetration loss, were proposed in the 3rd Generation Partnership Project Release 14 for mmWave communication system design. This paper presents NYUSIM 2.0, an improved channel simulator which can simulate spatially consistent channel realizations based on the existing drop-based channel simulator NYUSIM 1.6.1. A geometry-based approach using multiple reflection surfaces is proposed to generate spatially correlated and time-variant channel coefficients. Using results from 73 GHz pedestrian measurements for human blockage, a four-state Markov model has been implemented in NYUSIM to simulate dynamic human blockage shadowing loss. To model the excess path loss due to penetration into buildings, a parabolic model for outdoor-to-indoor penetration loss has been adopted from the 5G Channel Modeling special interest group and implemented in NYUSIM 2.0. This paper demonstrates how these new modeling capabilities reproduce realistic data when implemented in Monte Carlo fashion using NYUSIM 2.0, making it a valuable measurement-based channel simulator for fifth-generation and beyond mmWave communication system design and evaluation.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Scattering Mechanisms and Modeling for Terahertz Wireless Communications
Authors:
Shihao Ju,
Syed Hashim Ali Shah,
Muhammad Affan Javed,
Jun Li,
Girish Palteru,
Jyotish Robin,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz - 1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on…
▽ More
This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz - 1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on the reflection coefficient for rough surfaces is investigated. Received power is derived using two popular scattering models - the directive scattering (DS) model and the radar cross section (RCS) model through simulations over a wide range of frequencies, materials, and orientations for the two models, and measurements confirm the accuracy of the DS model at 140 GHz. This paper shows that scattering can become a prominent propagation mechanism as frequencies extend to millimeter-wave (mmWave) and beyond, but at other times can be treated like simple reflection. Knowledge of scattering effects is critical for appropriate and realistic channel models, which further support the development of massive multiple input-multiple output (MIMO) techniques, localization, ray tracing tool design, and imaging for future 5G and 6G wireless systems.
△ Less
Submitted 8 March, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Position Locationing for Millimeter Wave Systems
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
The vast amount of spectrum available for millimeter wave (mmWave) wireless communication systems will support accurate real-time positioning concurrent with communication signaling. This paper demonstrates that accurate estimates of the position of an unknown node can be determined using estimates of time of arrival (ToA), angle of arrival (AoA), as well as data fusion or machine learning. Real-w…
▽ More
The vast amount of spectrum available for millimeter wave (mmWave) wireless communication systems will support accurate real-time positioning concurrent with communication signaling. This paper demonstrates that accurate estimates of the position of an unknown node can be determined using estimates of time of arrival (ToA), angle of arrival (AoA), as well as data fusion or machine learning. Real-world data at 28 GHz and 73 GHz is used to show that AoA-based localization techniques will need to be augmented with other positioning techniques. The fusion of AoA-based positioning with received power measurements for RXs in an office which has dimensions of 35 m by 65.5 m is shown to provide location accuracies ranging from 16 cm to 3.25 m, indicating promise for accurate positioning capabilities in future networks. Received signal strength intensity (RSSI) based positioning techniques that exploit the ordering of the received power can be used to determine rough estimates of user position. Prediction of received signal characteristics is done using 2-D ray tracing.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Verification and Calibration of Antenna Cross-Polarization Discrimination and Penetration Loss for Millimeter Wave Communications
Authors:
Yunchou Xing,
Ojas Kanhere,
Shihao Ju,
Theodore S. Rappaport,
George R. MacCartney Jr
Abstract:
This article presents measurement guidelines and verification procedures for antenna cross-polarization discrimination (XPD) and penetration loss measurements for millimeter wave (mmWave) channel sounder systems. These techniques are needed to ensure accurate and consistent measurements by different researchers at different frequencies and bandwidths. Measurements at 73 GHz are used to demonstrate…
▽ More
This article presents measurement guidelines and verification procedures for antenna cross-polarization discrimination (XPD) and penetration loss measurements for millimeter wave (mmWave) channel sounder systems. These techniques are needed to ensure accurate and consistent measurements by different researchers at different frequencies and bandwidths. Measurements at 73 GHz are used to demonstrate and verify the guidelines, and show the consistency of the antenna XPD factor and the penetration loss at different transmitter-receiver (T-R) separation distances, thus providing a systematic method that may be used at any frequency for reliable field measurements.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
