-
A Novel Technique to Parameterize Congestion Control in 6TiSCH IIoT Networks
Authors:
Kushal Chakraborty,
Aritra Kumar Dutta,
Mohammad Avesh Hussain,
Syed Raafay Mohiuddin,
Nikumani Choudhury,
Rakesh Matam,
Mithun Mukherjee
Abstract:
The Industrial Internet of Things (IIoT) refers to the use of interconnected smart devices, sensors, and other technologies to create a network of intelligent systems that can monitor and manage industrial processes. 6TiSCH (IPv6 over the Time Slotted Channel Hop** mode of IEEE 802.15.4e) as an enabling technology facilitates low-power and low-latency communication between IoT devices in industr…
▽ More
The Industrial Internet of Things (IIoT) refers to the use of interconnected smart devices, sensors, and other technologies to create a network of intelligent systems that can monitor and manage industrial processes. 6TiSCH (IPv6 over the Time Slotted Channel Hop** mode of IEEE 802.15.4e) as an enabling technology facilitates low-power and low-latency communication between IoT devices in industrial environments. The Routing Protocol for Low power and lossy networks (RPL), which is used as the de-facto routing protocol for 6TiSCH networks is observed to suffer from several limitations, especially during congestion in the network. Therefore, there is an immediate need for some modifications to the RPL to deal with this problem. Under traffic load which keeps on changing continuously at different instants of time, the proposed mechanism aims at finding the appropriate parent for a node that can forward the packet to the destination through the least congested path with minimal packet loss. This facilitates congestion management under dynamic traffic loads. For this, a new metric for routing using the concept of exponential weighting has been proposed, which takes the number of packets present in the queue of the node into account when choosing the parent at a particular instance of time. Additionally, the paper proposes a parent selection and swap** mechanism for congested networks. Performance evaluations are carried out in order to validate the proposed work. The results show an improvement in the performance of RPL under heavy and dynamic traffic loads.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
Advancements in Upper Body Exoskeleton: Implementing Active Gravity Compensation with a Feedforward Controller
Authors:
Muhammad Ayaz Hussain,
Ioannis Iossifidis
Abstract:
In this study, we present a feedforward control system designed for active gravity compensation on an upper body exoskeleton. The system utilizes only positional data from internal motor sensors to calculate torque, employing analytical control equations based on Newton-Euler Inverse Dynamics. Compared to feedback control systems, the feedforward approach offers several advantages. It eliminates t…
▽ More
In this study, we present a feedforward control system designed for active gravity compensation on an upper body exoskeleton. The system utilizes only positional data from internal motor sensors to calculate torque, employing analytical control equations based on Newton-Euler Inverse Dynamics. Compared to feedback control systems, the feedforward approach offers several advantages. It eliminates the need for external torque sensors, resulting in reduced hardware complexity and weight. Moreover, the feedforward control exhibits a more proactive response, leading to enhanced performance. The exoskeleton used in the experiments is lightweight and comprises 4 Degrees of Freedom, closely mimicking human upper body kinematics and three-dimensional range of motion. We conducted tests on both hardware and simulations of the exoskeleton, demonstrating stable performance. The system maintained its position over an extended period, exhibiting minimal friction and avoiding undesired slewing.
△ Less
Submitted 9 September, 2023;
originally announced September 2023.
-
Biologically Inspired Model for Timed Motion in Robotic Systems
Authors:
Sebastian Doliwa,
Muhammad Ayaz Hussain,
Tim Sziburis,
Ioannis Iossifidis
Abstract:
The goal of this work is the development of a motion model for sequentially timed movement actions in robotic systems under specific consideration of temporal stabilization, that is maintaining an approximately constant overall movement time (isochronous behavior). This is demonstrated both in simulation and on a physical robotic system for the task of intercepting a moving target in three-dimensi…
▽ More
The goal of this work is the development of a motion model for sequentially timed movement actions in robotic systems under specific consideration of temporal stabilization, that is maintaining an approximately constant overall movement time (isochronous behavior). This is demonstrated both in simulation and on a physical robotic system for the task of intercepting a moving target in three-dimensional space. Motivated from humanoid motion, timing plays a vital role to generate a naturalistic behavior in interaction with the dynamic environment as well as adaptively planning and executing action sequences on-line. In biological systems, many of the physiological and anatomical functions follow a particular level of periodicity and stabilization, which exhibit a certain extent of resilience against external disturbances. A main aspect thereof is stabilizing movement timing against limited perturbations. Especially human arm movement, namely when it is tasked to reach a certain goal point, pose or configuration, shows a stabilizing behavior. This work incorporates the utilization of an extended Kalman filter (EKF) which was implemented to predict the target position while co** with non-linear system dynamics. The periodicity and temporal stabilization in biological systems was artificially generated by a Hopf oscillator, yielding a sinusoidal velocity profile for smooth and repeatable motion.
△ Less
Submitted 29 July, 2021; v1 submitted 30 June, 2021;
originally announced June 2021.
-
Improved Multiple Feedback Successive Interference Cancellation Algorithm for Near-Optimal MIMO Detection
Authors:
Manish Mandloi,
Mohammed Azahar Hussain,
Vimal Bhatia
Abstract:
In this article, we propose an improved multiple feedback successive interference cancellation (IMF-SIC) algorithm for symbol vector detection in multiple-input multiple-output (MIMO) spatial multiplexing systems. The multiple feedback (MF) strategy in successive interference cancellation (SIC) is based on the concept of shadow area constraint (SAC) where, if the decision falls in the shadow regio…
▽ More
In this article, we propose an improved multiple feedback successive interference cancellation (IMF-SIC) algorithm for symbol vector detection in multiple-input multiple-output (MIMO) spatial multiplexing systems. The multiple feedback (MF) strategy in successive interference cancellation (SIC) is based on the concept of shadow area constraint (SAC) where, if the decision falls in the shadow region multiple neighboring constellation points will be used in the decision feedback loop followed by the conventional SIC. The best candidate symbol from multiple neighboring symbols is selected using the maximum likelihood (ML) criteria. However, while deciding the best symbol from multiple neighboring symbols, the SAC condition may occur in subsequent layers which results in inaccurate decision. In order to overcome this limitation, in the proposed algorithm, SAC criteria is checked recursively for each layer. This results in successful mitigation of error propagation thus significantly improving the bit error rate (BER) performance. Further, we also propose an ordered IMF-SIC (OIMF-SIC) where we use log likelihood ratio (LLR) based dynamic ordering of the detection sequence. In OIMF-SIC, we use the term dynamic ordering in the sense that the detection order is updated after every successful decision. Simulation results show that the proposed algorithms outperform the existing detectors such as conventional SIC and MF-SIC in terms of BER, and achieves a near ML performance.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
Resolution of Unidentified Words in Machine Translation
Authors:
Sana Ullah,
M. Asdaque Hussain,
Kyung Sup Kwak
Abstract:
This paper presents a mechanism of resolving unidentified lexical units in Text-based Machine Translation (TBMT). In a Machine Translation (MT) system it is unlikely to have a complete lexicon and hence there is intense need of a new mechanism to handle the problem of unidentified words. These unknown words could be abbreviations, names, acronyms and newly introduced terms. We have proposed an alg…
▽ More
This paper presents a mechanism of resolving unidentified lexical units in Text-based Machine Translation (TBMT). In a Machine Translation (MT) system it is unlikely to have a complete lexicon and hence there is intense need of a new mechanism to handle the problem of unidentified words. These unknown words could be abbreviations, names, acronyms and newly introduced terms. We have proposed an algorithm for the resolution of the unidentified words. This algorithm takes discourse unit (primitive discourse) as a unit of analysis and provides real time updates to the lexicon. We have manually applied the algorithm to news paper fragments. Along with anaphora and cataphora resolution, many unknown words especially names and abbreviations were updated to the lexicon.
△ Less
Submitted 28 July, 2010; v1 submitted 9 November, 2009;
originally announced November 2009.
