-
Multiphase Flow Simulation of Blow-by and Fuel-in-Oil Dilution via the Piston Ring Pack Using the CFD Level-Set Method
Authors:
Patrick Antony,
Norbert Hosters,
Marek Behr,
Anselm Hopf,
Frank Krämer,
Carsten Weber,
Paul Turner
Abstract:
Modern diesel engines temporarily use a very late post-injection in the combustion cycle to either generate heat for a diesel particulate filter regeneration or purge a lean NOx trap. In some configurations, unburned fuel is left at the cylinder walls and is transported via the piston rings toward the lower crankcase region, where fuel may dilute the oil. Reduced oil lubrication shortens the oil s…
▽ More
Modern diesel engines temporarily use a very late post-injection in the combustion cycle to either generate heat for a diesel particulate filter regeneration or purge a lean NOx trap. In some configurations, unburned fuel is left at the cylinder walls and is transported via the piston rings toward the lower crankcase region, where fuel may dilute the oil. Reduced oil lubrication shortens the oil service intervals and increases friction. Beside diesel fuel, this problem may also occur for other types of liquid fuels such as alcohols and e-fuels. The exact transport mechanism of the unburned fuel via the piston ring pack grooves and cylinder wall is hard to measure experimentally, motivating numerical flow simulation in early design stages for an in-depth understanding of the involved processes. A new CFD simulation methodology has been developed to investigate the transient, compressible, multiphase flow around the piston ring pack, through the gap between piston and liner, and its impact on fuel or oil transport. The modern level-set approach is used for the multiphase physics, which directly captures the sharp interface between blow-by gas and fuel or oil. Transient blow-by and two-phase flow simulations have been extensively applied to a Ford 2.0L I4 diesel test engine. The results confirm the validity of the flow compressibility assumption and highlight the sensitivity of the fuel leakage regarding piston sealing ring movement and highly resolved meshes for the multiphase flow. Based on the simulation results, design recommendations for piston and piston ring geometry are provided to reduce the fuel transport toward the crankcase.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
On the number of subproblem iterations per coupling step in partitioned fluid-structure interaction simulations
Authors:
Thomas Spenke,
Nicolas Delaissé,
Joris Degroote,
Norbert Hosters
Abstract:
In literature, the cost of a partitioned fluid-structure interaction scheme is typically assessed by the number of coupling iterations required per time step, while ignoring the internal iterations within the nonlinear subproblems. In this work, we demonstrate that these internal iterations have a significant influence on the computational cost of the coupled simulation. Particular attention is pa…
▽ More
In literature, the cost of a partitioned fluid-structure interaction scheme is typically assessed by the number of coupling iterations required per time step, while ignoring the internal iterations within the nonlinear subproblems. In this work, we demonstrate that these internal iterations have a significant influence on the computational cost of the coupled simulation. Particular attention is paid to how limiting the number of iterations within each solver call can shorten the overall run time, as it avoids polishing the subproblem solution using unconverged coupling data. Based on systematic parameter studies, we investigate the optimal number of subproblem iterations per coupling step. Lastly, this work proposes a new convergence criterion for coupled systems that is based on the residuals of the subproblems and therefore does not require any additional convergence tolerance for the coupling loop.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
A Data-driven Reduced Order Modeling Approach Applied In Context Of Numerical Analysis And Optimization Of Plastic Profile Extrusion
Authors:
Daniel Hilger,
Norbert Hosters
Abstract:
In course of this work, we examine the process of plastic profile extrusion, where a polymer melt is shaped inside the so-called extrusion die and fixed in its shape by solidification in the downstream calibration unit. More precise, we focus on the development of a data-driven reduced order model (ROM) for the purpose of predicting temperature distributions within the extruded profiles inside the…
▽ More
In course of this work, we examine the process of plastic profile extrusion, where a polymer melt is shaped inside the so-called extrusion die and fixed in its shape by solidification in the downstream calibration unit. More precise, we focus on the development of a data-driven reduced order model (ROM) for the purpose of predicting temperature distributions within the extruded profiles inside the calibration unit. Therein, the ROM functions as a first step to our overall goal of prediction based process control in order to avoid undesired warpage and damages of the final product.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
A Robin-Neumann Scheme with Quasi-Newton Acceleration for Partitioned Fluid-Structure Interaction
Authors:
Thomas Spenke,
Michel Make,
Norbert Hosters
Abstract:
The Dirichlet-Neumann scheme is the most common partitioned algorithm for fluid-structure interaction (FSI) and offers high flexibility concerning the solvers employed for the two subproblems. Nevertheless, it is not without shortcomings: to begin with, the inherent added-mass effect often destabilizes the numerical solution severely. Moreover, the Dirichlet-Neumann scheme cannot be applied to FSI…
▽ More
The Dirichlet-Neumann scheme is the most common partitioned algorithm for fluid-structure interaction (FSI) and offers high flexibility concerning the solvers employed for the two subproblems. Nevertheless, it is not without shortcomings: to begin with, the inherent added-mass effect often destabilizes the numerical solution severely. Moreover, the Dirichlet-Neumann scheme cannot be applied to FSI problems in which an incompressible fluid is fully enclosed by Dirichlet boundaries, as it is incapable of satisfying the volume constraint. In the last decade, interface quasi-Newton methods have proven to control the added-mass effect and substantially speed up convergence by adding a Newton-like update step to the Dirichlet-Neumann coupling. They are, however, without effect on the incompressibility dilemma. As an alternative, the Robin-Neumann scheme generalizes the fluid's boundary condition to a Robin condition by including the Cauchy stresses. While this modification in fact successfully tackles both drawbacks of the Dirichlet-Neumann approach, the price to be paid is a strong dependency on the Robin weighting parameter, with very limited a priori knowledge about good choices. This work proposes a strategy to merge these two ideas and benefit from their combined strengths. The resulting quasi-Newton-accelerated Robin-Neumann scheme is compared to both Robin- and Dirichlet-Neumann variants. The numerical tests demonstrate that it does not only provide faster convergence, but also massively reduces the influence of the Robin parameter, mitigating the main drawback of the Robin-Neumann algorithm.
△ Less
Submitted 14 November, 2022; v1 submitted 1 April, 2022;
originally announced April 2022.
-
Spline-Based Space-Time Finite Element Approach for Fluid-Structure Interaction Problems With a Focus on Fully Enclosed Domains
Authors:
Michel Make,
Thomas Spenke,
Norbert Hosters,
Marek Behr
Abstract:
Non-Uniform Rational B-Spline (NURBS) surfaces are commonly used within Computer-Aided Design (CAD) tools to represent geometric objects. When using isogeometric analysis (IGA), it is possible to use such NURBS geometries for numerical analysis directly. Analyzing fluid flows, however, requires complex three-dimensional geometries to represent flow domains. Defining a parametrization of such volum…
▽ More
Non-Uniform Rational B-Spline (NURBS) surfaces are commonly used within Computer-Aided Design (CAD) tools to represent geometric objects. When using isogeometric analysis (IGA), it is possible to use such NURBS geometries for numerical analysis directly. Analyzing fluid flows, however, requires complex three-dimensional geometries to represent flow domains. Defining a parametrization of such volumetric domains using NURBS can be challenging and is still an ongoing topic in the IGA community. With the recently developed NURBS-enhanced finite element method (NEFEM), the favorable geometric characteristics of NURBS are used within a standard finite element method. This is achieved by enhancing the elements touching the boundary by using the NURBS geometry itself. In the current work, a new variation of NEFEM is introduced, which is suitable for three-dimensional space-time finite element formulations. The proposed method makes use of a new map** which results in a non-Cartesian formulation suitable for fluid-structure interaction (FSI). This is demonstrated by combining the method with an IGA formulation in a strongly-coupled partitioned framework for solving FSI problems. The framework yields a fully spline-based representation of the fluid-structure interface through a single NURBS. The coupling conditions at the fluid-structure interface are enforced through a Robin-Neumann type coupling scheme. This scheme is particularly useful when considering incompressible fluids in fully Dirichlet-bounded and curved problems, as it satisfies the incompressibility constraint on the fluid for each step within the coupling procedure. The accuracy and performance of the introduced spline-based space-time finite element approach and its use within the proposed coupled FSI framework are demonstrated using a series of two- and three-dimensional benchmark problems.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Investigation of Physics-Informed Deep Learning for the Prediction of Parametric, Three-Dimensional Flow Based on Boundary Data
Authors:
Philip Heger,
Markus Full,
Daniel Hilger,
Norbert Hosters
Abstract:
The placement of temperature sensitive and safety-critical components is crucial in the automotive industry. It is therefore inevitable, even at the design stage of new vehicles that these components are assessed for potential safety issues. However, with increasing number of design proposals, risk assessment quickly becomes expensive. We therefore present a parameterized surrogate model for the p…
▽ More
The placement of temperature sensitive and safety-critical components is crucial in the automotive industry. It is therefore inevitable, even at the design stage of new vehicles that these components are assessed for potential safety issues. However, with increasing number of design proposals, risk assessment quickly becomes expensive. We therefore present a parameterized surrogate model for the prediction of three-dimensional flow fields in aerothermal vehicle simulations. The proposed physics-informed neural network (PINN) design is aimed at learning families of flow solutions according to a geometric variation. In scope of this work, we could show that our nondimensional, multivariate scheme can be efficiently trained to predict the velocity and pressure distribution for different design scenarios and geometric scales. The proposed algorithm is based on a parametric minibatch training which enables the utilization of large datasets necessary for the three-dimensional flow modeling. Further, we introduce a continuous resampling algorithm that allows to operate on one static dataset. Every feature of our methodology is tested individually and verified against conventional CFD simulations. Finally, we apply our proposed method in context of an exemplary real-world automotive application.
△ Less
Submitted 22 March, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
The Performance Impact of Newton Iterations per Solver Call in Partitioned Fluid-Structure Interaction
Authors:
Thomas Spenke,
Norbert Hosters,
Marek Behr
Abstract:
The cost of a partitioned fluid-structure interaction scheme is typically assessed by the number of coupling iterations required per time step, while ignoring the Newton loops within the nonlinear sub-solvers. In this work, we discuss why these single-field iterations deserve more attention when evaluating the coupling's efficiency and how to find the optimal number of Newton steps per coupling it…
▽ More
The cost of a partitioned fluid-structure interaction scheme is typically assessed by the number of coupling iterations required per time step, while ignoring the Newton loops within the nonlinear sub-solvers. In this work, we discuss why these single-field iterations deserve more attention when evaluating the coupling's efficiency and how to find the optimal number of Newton steps per coupling iteration.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
A novel approach to fluid-structure interaction simulations involving large translation and contact
Authors:
Daniel Hilger,
Norbert Hosters,
Fabian Key,
Stefanie Elgeti,
Marek Behr
Abstract:
In this work, we present a novel method for the mesh update in flow problems with moving boundaries, the phantom domain deformation mesh update method (PD-DMUM). The PD-DMUM is designed to avoid remeshing; even in the event of large, unidirectional displacements of boundaries. The method combines the concept of two mesh adaptation approaches: (1) The virtual ring shear-slip mesh updatemethod (VR-S…
▽ More
In this work, we present a novel method for the mesh update in flow problems with moving boundaries, the phantom domain deformation mesh update method (PD-DMUM). The PD-DMUM is designed to avoid remeshing; even in the event of large, unidirectional displacements of boundaries. The method combines the concept of two mesh adaptation approaches: (1) The virtual ring shear-slip mesh updatemethod (VR-SSMUM); and (2) the elastic mesh update method (EMUM). As in the VR-SSMUM, the PD-DMUMextends the fluid domain by a phantom domain; the PD-DMUM can thus locally adapt the element density. Combined with the EMUM, the PD-DMUMallows the consideration of arbitrary boundary movements. In this work, we apply the PD-DMUM in two test cases. Within the first test case, we validate the PD-DMUM in a 2D Poiseuille flow on a moving background mesh. Subsequently the fluid-structure interaction (FSI) problem in the second test case serves as a proof of concept. More, we stress the advantages of the novel method with regard to conventional mesh update approaches.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
SplineLib: A Modern Multi-Purpose C++ Spline Library
Authors:
Markus Frings,
Norbert Hosters,
Corinna Müller,
Max Spahn,
Christoph Susen,
Konstantin Key,
Stefanie Elgeti
Abstract:
This paper provides the description of a novel, multi-purpose spline library. In accordance with the increasingly diverse modes of usage of splines, it is multi-purpose in the sense that it supports geometry representation, finite element analysis, and optimization. The library features reading and writing for various file formats and a wide range of spline manipulation algorithms. Further, a new…
▽ More
This paper provides the description of a novel, multi-purpose spline library. In accordance with the increasingly diverse modes of usage of splines, it is multi-purpose in the sense that it supports geometry representation, finite element analysis, and optimization. The library features reading and writing for various file formats and a wide range of spline manipulation algorithms. Further, a new efficient and objective-oriented algorithm for B-spline basis function evaluation is included. All features are available by a spline-type independent interface. The library is written in modern C++ with CMake as build system. This enables it for usage in typical scientific applications. It is provided as open-source library.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
A Multi-Vector Interface Quasi-Newton Method with Linear Complexity for Partitioned Fluid-Structure Interaction
Authors:
Thomas Spenke,
Norbert Hosters,
Marek Behr
Abstract:
In recent years, interface quasi-Newton methods have gained growing attention in the fluid-structure interaction community by significantly improving partitioned solution schemes: They not only help to control the inherent added-mass instability, but also prove to substantially speed up the coupling's convergence. In this work, we present a novel variant: The key idea is to build on the multi-vect…
▽ More
In recent years, interface quasi-Newton methods have gained growing attention in the fluid-structure interaction community by significantly improving partitioned solution schemes: They not only help to control the inherent added-mass instability, but also prove to substantially speed up the coupling's convergence. In this work, we present a novel variant: The key idea is to build on the multi-vector Jacobian update scheme first presented by Bogaers et al. (2014) and avoid any explicit representation of the (inverse) Jacobian approximation, since it slows down the solution for large systems. Instead, all terms involving a quadratic complexity have been systematically eliminated. The result is a new multi-vector interface quasi-Newton variant whose computational cost scales linearly with the problem size.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling
Authors:
Violeta Karyofylli,
Loic Wendling,
Michel Make,
Norbert Hosters,
Marek Behr
Abstract:
The quality of plastic parts produced through injection molding depends on many factors. Especially during the filling stage, defects such as weld lines, burrs, or insufficient filling can occur. Numerical methods need to be employed to improve product quality by means of predicting and simulating the injection molding process. In the current work, a highly viscous incompressible non-isothermal tw…
▽ More
The quality of plastic parts produced through injection molding depends on many factors. Especially during the filling stage, defects such as weld lines, burrs, or insufficient filling can occur. Numerical methods need to be employed to improve product quality by means of predicting and simulating the injection molding process. In the current work, a highly viscous incompressible non-isothermal two-phase flow is simulated, which takes place during the cavity filling. The injected melt exhibits a shear-thinning behavior, which is described by the Carreau-WLF model. Besides that, a novel discretization method is used in the context of 4D simplex space-time grids [2]. This method allows for local temporal refinement in the vicinity of, e.g., the evolving front of the melt [10]. Utilizing such an adaptive refinement can lead to locally improved numerical accuracy while maintaining the highest possible computational efficiency in the remaining of the domain. For demonstration purposes, a set of 2D and 3D benchmark cases, that involve the filling of various cavities with a distributor, are presented.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
