-
High-speed electrical connector assembly by structured compliance in a finray-effect gripper
Authors:
Richard Hartisch,
Kevin Haninger
Abstract:
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, requiring compensation of alignment errors while applying sufficient force in the insertion direction, ideally at high speeds and while gras** a range of components. Vision, tactile, or force sensors can compensate alignment errors, but have limited bandwidth, limiting the safe assembly spe…
▽ More
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, requiring compensation of alignment errors while applying sufficient force in the insertion direction, ideally at high speeds and while gras** a range of components. Vision, tactile, or force sensors can compensate alignment errors, but have limited bandwidth, limiting the safe assembly speed. Passive compliance such as silicone-based fingers can reduce collision forces and grasp a range of components, but often cannot provide the accuracy or assembly forces required. To support high-speed mechanical search and self-aligning insertion, this paper proposes monolithic additively manufactured fingers which realize a moderate, structured compliance directly proximal to the gripped object. The geometry of finray-effect fingers are adapted to add form-closure features and realize a directionally-dependent stiffness at the fingertip, with a high stiffness to apply insertion forces and lower transverse stiffness to support alignment. Design parameters and mechanical properties of the fingers are investigated with FEM and empirical studies, analyzing the stiffness, maximum load, and viscoelastic effects. The fingers realize a remote center of compliance, which is shown to depend on the rib angle, and a directional stiffness ratio of $14-36$. The fingers are applied to a plug insertion task, realizing a tolerance window of $7.5$ mm and approach speeds of $1.3$ m/s.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Compliant finray-effect gripper for high-speed robotic assembly of electrical components
Authors:
Richard Matthias Hartisch,
Kevin Haninger
Abstract:
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, limiting the speed and robustness of robot assembly, even when using vision, tactile, or force sensors. Connector insertion is a common industrial task, requiring horizontal alignment errors to be compensated with minimal force, then sufficient force to be brought in the insertion direction.…
▽ More
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, limiting the speed and robustness of robot assembly, even when using vision, tactile, or force sensors. Connector insertion is a common industrial task, requiring horizontal alignment errors to be compensated with minimal force, then sufficient force to be brought in the insertion direction. The ability to handle a variety of objects, achieve high-speeds, and handle a wide range in object position variation are also desired. Soft grippers can allow the grip** of parts with variation in surface geometry, but often focus on grip** alone and may not be able to bring the assembly forces required. To achieve high-speed connector insertion, this paper proposes monolithic fingers with structured compliance and form-closure features. A finray-effect gripper is adapted to realize structured (i.e. directional) stiffness that allows high-speed mechanical search, self-alignment in insertion, and sufficient assembly force. The design of the finray ribs and fingertips are investigated, with a final design allowing plug insertion with a tolerance window of up to 7.5 mm at high speed.
△ Less
Submitted 20 January, 2023;
originally announced January 2023.
-
Flexure-based Environmental Compliance for High-speed Robotic Contact Tasks
Authors:
Richard Hartisch,
Kevin Haninger
Abstract:
The design of physical compliance -- its location, degree, and structure -- affects robot performance and robustness in contact-rich tasks. While compliance is often used in the robot's joints, flange, or end-effector, this paper proposes compliant structures in the environment, allowing safe and robust contact while kee** the higher motion control bandwidth and precision of high impedance robot…
▽ More
The design of physical compliance -- its location, degree, and structure -- affects robot performance and robustness in contact-rich tasks. While compliance is often used in the robot's joints, flange, or end-effector, this paper proposes compliant structures in the environment, allowing safe and robust contact while kee** the higher motion control bandwidth and precision of high impedance robots. Compliance is here realized with flexures and viscoelastic materials, which are integrated to several mechanisms to offer structured compliance, such as a remote center of compliance. Additive manufacturing with fused deposition modeling is used, allowing faster design iteration and low-cost integration with standard industrial equipment. Mechanical properties, including the total stiffness matrix, stiffness ratio, and rotational precision, are analytically determined and compared to experimental results. Three remote center of compliance (RCC) devices and a 1-DOF linear device are prototyped and tested in high-speed assembly tasks.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Contact Information Flow and Design of Compliance
Authors:
Kevin Haninger,
Marcel Radke,
Richard Hartisch,
Jörg Krüger
Abstract:
Identifying changes in contact during contact-rich manipulation can detect task state or errors, enabling improved robustness and autonomy. The ability to detect contact is affected by the mechatronic design of the robot, especially its physical compliance. Established methods can design physical compliance for many aspects of contact performance (e.g. peak contact force, motion/force control band…
▽ More
Identifying changes in contact during contact-rich manipulation can detect task state or errors, enabling improved robustness and autonomy. The ability to detect contact is affected by the mechatronic design of the robot, especially its physical compliance. Established methods can design physical compliance for many aspects of contact performance (e.g. peak contact force, motion/force control bandwidth), but are based on time-invariant dynamic models. A change in contact mode is a discrete change in coupled robot-environment dynamics, not easily considered in existing design methods. Towards designing robots which can robustly detect changes in contact mode online, this paper investigates how mechatronic design can improve contact estimation, with a focus on the impact of the location and degree of compliance. A design metric of information gain is proposed which measures how much position/force measurements reduce uncertainty in the contact mode estimate. This information gain is developed for fully- and partially-observed systems, as partial observability can arise from joint flexibility in the robot or environmental inertia. Hardware experiments with various compliant setups validate that information gain predicts the speed and certainty with which contact is detected in (i) monitoring of contact-rich assembly and (ii) collision detection.
△ Less
Submitted 16 March, 2022; v1 submitted 24 October, 2021;
originally announced October 2021.
