-
Industrial Cabling in Constrained Environments: a Practical Approach and Current Challenges
Authors:
Tanureza Jaya,
Benjamin Michalak,
Marcel Radke,
Kevin Haninger
Abstract:
Cabling tasks (pulling, clip**, and plug insertion) are today mostly manual work, limiting the cost-effectiveness of electrification. Feasibility for the robotic gras** and insertion of plugs, as well as the manipulation of cables, have been shown in research settings. However, in many industrial tasks the complete process from picking, insertion, routing, and validation must be solved with on…
▽ More
Cabling tasks (pulling, clip**, and plug insertion) are today mostly manual work, limiting the cost-effectiveness of electrification. Feasibility for the robotic gras** and insertion of plugs, as well as the manipulation of cables, have been shown in research settings. However, in many industrial tasks the complete process from picking, insertion, routing, and validation must be solved with one system. This often means the cable must be directly manipulated for routing, and the plug must be manipulated for insertion, often in cluttered environments with tight space constraints.
Here we introduce an analysis of the complete industrial cabling tasks and demonstrate a solution from grasp, plug insertion, clip**, and final plug insertion. Industrial requirements are summarized, considering the space limitations, tolerances, and possible ways that the cabling process can be integrated into the production process.
This paper proposes gripper designs and general robotic assembly methods for the widely used FASTON and a cubical industrial connector. The proposed methods cover the cable grip**, handling, routing, and inserting processes of the connector. Customized grippers are designed to ensure the reliable grip** of the plugs and the pulling and manipulation of the cable segments. A passive component to correct the cable orientation is proposed, allowing the robot to re-grip the plug before insertion. In general, the proposed method can perform cable assembly with mere position control, foregoing complex control approaches.
This solution is demonstrated with an industrial product with realistic space requirements and tolerances, identifying difficult aspects of current cabling scenarios and potential to improve the automation-friendliness in the product design.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Soft finger rotational stability for precision grasps
Authors:
Hun Jang,
Valentyn Petrichenko,
Joonbum Bae,
Kevin Haninger
Abstract:
Soft robotic fingers can safely grasp fragile or variable form objects, but their force capacity is limited, especially with less contact area: precision grasps and when objects are smaller or not spherical. Current research is improving force capacity through mechanical design by increasing contact area or stiffness, typically without models which explain soft finger force limitations. To address…
▽ More
Soft robotic fingers can safely grasp fragile or variable form objects, but their force capacity is limited, especially with less contact area: precision grasps and when objects are smaller or not spherical. Current research is improving force capacity through mechanical design by increasing contact area or stiffness, typically without models which explain soft finger force limitations. To address this, this paper considers two types of soft grip failure, slip and dynamic rotational stability. For slip, the validity of a Coulomb model investigated, identifying the effect of contact area, pressure, and relative pose. For rotational stability, bulk linear stiffness of the fingers is used to develop conditions for dynamic stability and identify when rotation leads to slip. Together, these models suggest contact area improves force capacity by increasing transverse stiffness and normal force. The models are validated on pneumatic fingers, both custom PneuNets-based and commercially available. The models are used to find grip parameters which increase force capacity without failure.
△ Less
Submitted 24 March, 2024; v1 submitted 7 October, 2023;
originally announced October 2023.
-
Combining Sampling- and Gradient-based Planning for Contact-rich Manipulation
Authors:
Filippo Rozzi,
Loris Roveda,
Kevin Haninger
Abstract:
Planning over discontinuous dynamics is needed for robotics tasks like contact-rich manipulation, which presents challenges in the numerical stability and speed of planning methods when either neural network or analytical models are used. On the one hand, sampling-based planners require higher sample complexity in high-dimensional problems and cannot describe safety constraints such as force limit…
▽ More
Planning over discontinuous dynamics is needed for robotics tasks like contact-rich manipulation, which presents challenges in the numerical stability and speed of planning methods when either neural network or analytical models are used. On the one hand, sampling-based planners require higher sample complexity in high-dimensional problems and cannot describe safety constraints such as force limits. On the other hand, gradient-based solvers can suffer from local optima and convergence issues when the Hessian is poorly conditioned. We propose a planning method with both sampling- and gradient-based elements, using the Cross-entropy Method to initialize a gradient-based solver, providing better search over local minima and the ability to handle explicit constraints. We show the approach allows smooth, stable contact-rich planning for an impedance-controlled robot making contact with a stiff environment, benchmarking against gradient-only MPC and CEM.
△ Less
Submitted 24 March, 2024; v1 submitted 7 October, 2023;
originally announced October 2023.
-
High-speed electrical connector assembly by structured compliance in a finray-effect gripper
Authors:
Richard Hartisch,
Kevin Haninger
Abstract:
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, requiring compensation of alignment errors while applying sufficient force in the insertion direction, ideally at high speeds and while gras** a range of components. Vision, tactile, or force sensors can compensate alignment errors, but have limited bandwidth, limiting the safe assembly spe…
▽ More
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, requiring compensation of alignment errors while applying sufficient force in the insertion direction, ideally at high speeds and while gras** a range of components. Vision, tactile, or force sensors can compensate alignment errors, but have limited bandwidth, limiting the safe assembly speed. Passive compliance such as silicone-based fingers can reduce collision forces and grasp a range of components, but often cannot provide the accuracy or assembly forces required. To support high-speed mechanical search and self-aligning insertion, this paper proposes monolithic additively manufactured fingers which realize a moderate, structured compliance directly proximal to the gripped object. The geometry of finray-effect fingers are adapted to add form-closure features and realize a directionally-dependent stiffness at the fingertip, with a high stiffness to apply insertion forces and lower transverse stiffness to support alignment. Design parameters and mechanical properties of the fingers are investigated with FEM and empirical studies, analyzing the stiffness, maximum load, and viscoelastic effects. The fingers realize a remote center of compliance, which is shown to depend on the rib angle, and a directional stiffness ratio of $14-36$. The fingers are applied to a plug insertion task, realizing a tolerance window of $7.5$ mm and approach speeds of $1.3$ m/s.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Teaching contact-rich tasks from visual demonstrations by constraint extraction
Authors:
Christian Hegeler,
Filippo Rozzi,
Loris Roveda,
Kevin Haninger
Abstract:
Contact-rich manipulation involves kinematic constraints on the task motion, typically with discrete transitions between these constraints during the task. Allowing the robot to detect and reason about these contact constraints can support robust and dynamic manipulation, but how can these contact models be efficiently learned? Purely visual observations are an attractive data source, allowing pas…
▽ More
Contact-rich manipulation involves kinematic constraints on the task motion, typically with discrete transitions between these constraints during the task. Allowing the robot to detect and reason about these contact constraints can support robust and dynamic manipulation, but how can these contact models be efficiently learned? Purely visual observations are an attractive data source, allowing passive task demonstrations with unmodified objects. Existing approaches for vision-only learning from demonstration are effective in pick-and-place applications and planar tasks. Nevertheless, accuracy/occlusions and unobserved task dynamics can limit their robustness in contact-rich manipulation. To use visual demonstrations for contact-rich robotic tasks, we consider the demonstration of pose trajectories with transitions between holonomic kinematic constraints, first clustering the trajectories into discrete contact modes, then fitting kinematic constraints per each mode. The fit constraints are then used to (i) detect contact online with force/torque measurements and (ii) plan the robot policy with respect to the active constraint. We demonstrate the approach with real experiments, on cabling and rake tasks, showing the approach gives robust manipulation through contact transitions.
△ Less
Submitted 3 April, 2023; v1 submitted 30 March, 2023;
originally announced March 2023.
-
Differentiable Compliant Contact Primitives for Estimation and Model Predictive Control
Authors:
Kevin Haninger,
Kangwagye Samuel,
Filippo Rozzi,
Sehoon Oh,
Loris Roveda
Abstract:
Control techniques like MPC can realize contact-rich manipulation which exploits dynamic information, maintaining friction limits and safety constraints. However, contact geometry and dynamics are required to be known. This information is often extracted from CAD, limiting scalability and the ability to handle tasks with varying geometry. To reduce the need for a priori models, we propose a framew…
▽ More
Control techniques like MPC can realize contact-rich manipulation which exploits dynamic information, maintaining friction limits and safety constraints. However, contact geometry and dynamics are required to be known. This information is often extracted from CAD, limiting scalability and the ability to handle tasks with varying geometry. To reduce the need for a priori models, we propose a framework for estimating contact models online based on torque and position measurements. To do this, compliant contact models are used, connected in parallel to model multi-point contact and constraints such as a hinge. They are parameterized to be differentiable with respect to all of their parameters (rest position, stiffness, contact location), allowing the coupled robot/environment dynamics to be linearized or efficiently used in gradient-based optimization. These models are then applied for: offline gradient-based parameter fitting, online estimation via an extended Kalman filter, and online gradient-based MPC. The proposed approach is validated on two robots, showing the efficacy of sensorless contact estimation and the effects of online estimation on MPC performance.
△ Less
Submitted 7 October, 2023; v1 submitted 30 March, 2023;
originally announced March 2023.
-
Compliant finray-effect gripper for high-speed robotic assembly of electrical components
Authors:
Richard Matthias Hartisch,
Kevin Haninger
Abstract:
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, limiting the speed and robustness of robot assembly, even when using vision, tactile, or force sensors. Connector insertion is a common industrial task, requiring horizontal alignment errors to be compensated with minimal force, then sufficient force to be brought in the insertion direction.…
▽ More
Fine assembly tasks such as electrical connector insertion have tight tolerances and sensitive components, limiting the speed and robustness of robot assembly, even when using vision, tactile, or force sensors. Connector insertion is a common industrial task, requiring horizontal alignment errors to be compensated with minimal force, then sufficient force to be brought in the insertion direction. The ability to handle a variety of objects, achieve high-speeds, and handle a wide range in object position variation are also desired. Soft grippers can allow the grip** of parts with variation in surface geometry, but often focus on grip** alone and may not be able to bring the assembly forces required. To achieve high-speed connector insertion, this paper proposes monolithic fingers with structured compliance and form-closure features. A finray-effect gripper is adapted to realize structured (i.e. directional) stiffness that allows high-speed mechanical search, self-alignment in insertion, and sufficient assembly force. The design of the finray ribs and fingertips are investigated, with a final design allowing plug insertion with a tolerance window of up to 7.5 mm at high speed.
△ Less
Submitted 20 January, 2023;
originally announced January 2023.
-
Model Predictive Impedance Control with Gaussian Processes for Human and Environment Interaction
Authors:
Kevin Haninger,
Christian Hegeler,
Luka Peternel
Abstract:
Robotic tasks which involve uncertainty--due to variation in goal, environment configuration, or confidence in task model--may require human input to instruct or adapt the robot. In tasks with physical contact, several existing methods for adapting robot trajectory or impedance according to individual uncertainties have been proposed, e.g., realizing intention detection or uncertainty-aware learni…
▽ More
Robotic tasks which involve uncertainty--due to variation in goal, environment configuration, or confidence in task model--may require human input to instruct or adapt the robot. In tasks with physical contact, several existing methods for adapting robot trajectory or impedance according to individual uncertainties have been proposed, e.g., realizing intention detection or uncertainty-aware learning from demonstration. However, isolated methods cannot address the wide range of uncertainties jointly present in many tasks.
To improve generality, this paper proposes a model predictive control (MPC) framework which plans both trajectory and impedance online, can consider discrete and continuous uncertainties, includes safety constraints, and can be efficiently applied to a new task. This framework can consider uncertainty from: contact constraint variation, uncertainty in human goals, or task disturbances. An uncertainty-aware task model is learned from a few ($\leq3$) demonstrations using Gaussian Processes. This task model is used in a nonlinear MPC problem to optimize robot trajectory and impedance according to belief in discrete human goals, human kinematics, safety constraints, contact stability, and frequency-domain disturbance rejection. This MPC formulation is introduced, analyzed with respect to convexity, and validated in co-manipulation with multiple goals, a collaborative polishing task, and a collaborative assembly task.
△ Less
Submitted 10 December, 2022; v1 submitted 15 August, 2022;
originally announced August 2022.
-
Impedance Adaptation by Reinforcement Learning with Contact Dynamic Movement Primitives
Authors:
Chunyang Chang,
Kevin Haninger,
Yunlei Shi,
Chengjie Yuan,
Zhaopeng Chen,
Jianwei Zhang
Abstract:
Dynamic movement primitives (DMPs) allow complex position trajectories to be efficiently demonstrated to a robot. In contact-rich tasks, where position trajectories alone may not be safe or robust over variation in contact geometry, DMPs have been extended to include force trajectories. However, different task phases or degrees of freedom may require the tracking of either position or force -- e.g…
▽ More
Dynamic movement primitives (DMPs) allow complex position trajectories to be efficiently demonstrated to a robot. In contact-rich tasks, where position trajectories alone may not be safe or robust over variation in contact geometry, DMPs have been extended to include force trajectories. However, different task phases or degrees of freedom may require the tracking of either position or force -- e.g., once contact is made, it may be more important to track the force demonstration trajectory in the contact direction. The robot impedance balances between following a position or force reference trajectory, where a high stiffness tracks position and a low stiffness tracks force. This paper proposes using DMPs to learn position and force trajectories from demonstrations, then adapting the impedance parameters online with a higher-level control policy trained by reinforcement learning. This allows one-shot demonstration of the task with DMPs, and improved robustness and performance from the impedance adaptation. The approach is validated on peg-in-hole and adhesive strip application tasks.
△ Less
Submitted 21 March, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Flexure-based Environmental Compliance for High-speed Robotic Contact Tasks
Authors:
Richard Hartisch,
Kevin Haninger
Abstract:
The design of physical compliance -- its location, degree, and structure -- affects robot performance and robustness in contact-rich tasks. While compliance is often used in the robot's joints, flange, or end-effector, this paper proposes compliant structures in the environment, allowing safe and robust contact while kee** the higher motion control bandwidth and precision of high impedance robot…
▽ More
The design of physical compliance -- its location, degree, and structure -- affects robot performance and robustness in contact-rich tasks. While compliance is often used in the robot's joints, flange, or end-effector, this paper proposes compliant structures in the environment, allowing safe and robust contact while kee** the higher motion control bandwidth and precision of high impedance robots. Compliance is here realized with flexures and viscoelastic materials, which are integrated to several mechanisms to offer structured compliance, such as a remote center of compliance. Additive manufacturing with fused deposition modeling is used, allowing faster design iteration and low-cost integration with standard industrial equipment. Mechanical properties, including the total stiffness matrix, stiffness ratio, and rotational precision, are analytically determined and compared to experimental results. Three remote center of compliance (RCC) devices and a 1-DOF linear device are prototyped and tested in high-speed assembly tasks.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Towards High-Payload Admittance Control for Manual Guidance with Environmental Contact
Authors:
Kevin Haninger,
Marcel Radke,
Axel Vick,
Jörg Krüger
Abstract:
Force control enables hands-on teaching and physical collaboration, with the potential to improve ergonomics and flexibility of automation. Established methods for the design of compliance, impedance control, and \rev{collision response} can achieve free-space stability and acceptable peak contact force on lightweight, lower payload robots. Scaling collaboration to higher payloads can allow new ap…
▽ More
Force control enables hands-on teaching and physical collaboration, with the potential to improve ergonomics and flexibility of automation. Established methods for the design of compliance, impedance control, and \rev{collision response} can achieve free-space stability and acceptable peak contact force on lightweight, lower payload robots. Scaling collaboration to higher payloads can allow new applications, but introduces challenges due to the more significant payload dynamics and the use of higher-payload industrial robots.
To achieve high-payload manual guidance with contact, this paper proposes and validates new mechatronic design methods: standard admittance control is extended with dam** feedback, compliant structures are integrated to the environment, and a contact response method which allows continuous admittance control is proposed. These methods are compared with respect to free-space stability, contact stability, and peak contact force. The resulting methods are then applied to realize two contact-rich tasks on a 16 kg payload (peg in hole and slot assembly) and free-space co-manipulation of a 50 kg payload.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Contact Information Flow and Design of Compliance
Authors:
Kevin Haninger,
Marcel Radke,
Richard Hartisch,
Jörg Krüger
Abstract:
Identifying changes in contact during contact-rich manipulation can detect task state or errors, enabling improved robustness and autonomy. The ability to detect contact is affected by the mechatronic design of the robot, especially its physical compliance. Established methods can design physical compliance for many aspects of contact performance (e.g. peak contact force, motion/force control band…
▽ More
Identifying changes in contact during contact-rich manipulation can detect task state or errors, enabling improved robustness and autonomy. The ability to detect contact is affected by the mechatronic design of the robot, especially its physical compliance. Established methods can design physical compliance for many aspects of contact performance (e.g. peak contact force, motion/force control bandwidth), but are based on time-invariant dynamic models. A change in contact mode is a discrete change in coupled robot-environment dynamics, not easily considered in existing design methods. Towards designing robots which can robustly detect changes in contact mode online, this paper investigates how mechatronic design can improve contact estimation, with a focus on the impact of the location and degree of compliance. A design metric of information gain is proposed which measures how much position/force measurements reduce uncertainty in the contact mode estimate. This information gain is developed for fully- and partially-observed systems, as partial observability can arise from joint flexibility in the robot or environmental inertia. Hardware experiments with various compliant setups validate that information gain predicts the speed and certainty with which contact is detected in (i) monitoring of contact-rich assembly and (ii) collision detection.
△ Less
Submitted 16 March, 2022; v1 submitted 24 October, 2021;
originally announced October 2021.
-
Model Predictive Control with Gaussian Processes for Flexible Multi-Modal Physical Human Robot Interaction
Authors:
Kevin Haninger,
Christian Hegeler,
Luka Peternel
Abstract:
Physical human-robot interaction can improve human ergonomics, task efficiency, and the flexibility of automation, but often requires application-specific methods to detect human state and determine robot response. At the same time, many potential human-robot interaction tasks involve discrete modes, such as phases of a task or multiple possible goals, where each mode has a distinct objective and…
▽ More
Physical human-robot interaction can improve human ergonomics, task efficiency, and the flexibility of automation, but often requires application-specific methods to detect human state and determine robot response. At the same time, many potential human-robot interaction tasks involve discrete modes, such as phases of a task or multiple possible goals, where each mode has a distinct objective and human behavior. In this paper, we propose a novel method for multi-modal physical human-robot interaction that builds a Gaussian process model for human force in each mode of a collaborative task. These models are then used for Bayesian inference of the mode, and to determine robot reactions through model predictive control. This approach enables optimization of robot trajectory based on the belief of human intent, while considering robot impedance and human joint configuration, according to ergonomic- and/or task-related objectives. The proposed method reduces programming time and complexity, requiring only a low number of demonstrations (here, three per mode) and a mode-specific objective function to commission a flexible online human-robot collaboration task. We validate the method with experiments on an admittance-controlled industrial robot, performing a collaborative assembly task with two modes where assistance is provided in full six degrees of freedom. It is shown that the developed algorithm robustly re-plans to changes in intent or robot initial position, achieving online control at 15 Hz.
△ Less
Submitted 24 October, 2021;
originally announced October 2021.
-
Minimum directed information: A design principle for compliant robots
Authors:
Kevin Haninger
Abstract:
A robot's dynamics -- especially the degree and location of compliance -- can significantly affect performance and control complexity. Passive dynamics can be designed with good regions of attraction or limit cycles for a specific task, but achieving flexibility on a range of tasks requires co-design of control. This paper takes an information perspective: the robot dynamics should reduce the amou…
▽ More
A robot's dynamics -- especially the degree and location of compliance -- can significantly affect performance and control complexity. Passive dynamics can be designed with good regions of attraction or limit cycles for a specific task, but achieving flexibility on a range of tasks requires co-design of control. This paper takes an information perspective: the robot dynamics should reduce the amount of information required for a controller to achieve a threshold of performance in a range of tasks. Towards this goal, an iterative method is proposed to minimize the directed information from state to control on discrete-time nonlinear systems. iLQG is used to find a controller and value of information, then the design parameters of the dynamics (e.g. stiffness of end-effector or joint) are optimized to reduce directed information while maintaining a minimum bound on performance. The approach is validated in simulation, on a two-mass system in contact with an uncertain wall position and a high-DOF door opening task, and shown to improve noise robustness and reduce time variance of control gains.
△ Less
Submitted 27 March, 2021;
originally announced March 2021.
-
Towards Learning Controllable Representations of Physical Systems
Authors:
Kevin Haninger,
Raul Vicente Garcia,
Joerg Krueger
Abstract:
Learned representations of dynamical systems reduce dimensionality, potentially supporting downstream reinforcement learning (RL). However, no established methods predict a representation's suitability for control and evaluation is largely done via downstream RL performance, slowing representation design. Towards a principled evaluation of representations for control, we consider the relationship…
▽ More
Learned representations of dynamical systems reduce dimensionality, potentially supporting downstream reinforcement learning (RL). However, no established methods predict a representation's suitability for control and evaluation is largely done via downstream RL performance, slowing representation design. Towards a principled evaluation of representations for control, we consider the relationship between the true state and the corresponding representations, proposing that ideally each representation corresponds to a unique true state. This motivates two metrics: temporal smoothness and high mutual information between true state/representation. These metrics are related to established representation objectives, and studied on Lagrangian systems where true state, information requirements, and statistical properties of the state can be formalized for a broad class of systems. These metrics are shown to predict reinforcement learning performance in a simulated peg-in-hole task when comparing variants of autoencoder-based representations.
△ Less
Submitted 24 November, 2020; v1 submitted 16 November, 2020;
originally announced November 2020.
-
Safe rendering of high impedance on a series-elastic actuator with disturbance observer-based torque control
Authors:
Kevin Haninger,
Abner Asignacion,
Sehoon Oh
Abstract:
An important performance metric for series-elastic actuators is the range of impedance which they can safely render. Advanced torque control, using techniques such as the disturbance observer, improve torque tracking bandwidth and accuracy, but their impact on safe impedance range is not established. However, to define a safe impedance range requires a practical coupled stability condition. Here,…
▽ More
An important performance metric for series-elastic actuators is the range of impedance which they can safely render. Advanced torque control, using techniques such as the disturbance observer, improve torque tracking bandwidth and accuracy, but their impact on safe impedance range is not established. However, to define a safe impedance range requires a practical coupled stability condition. Here, passivity-based conditions are proposed for two variants of DOB torque control, and validated experimentally in a high-stiffness environment. While high-gain PD torque control has been shown to reduce Z-width, it is here shown that a DOB reduces the need for high-gain PD feedback and allows a higher rendered impedance. A dynamic feedforward compensator is proposed which increases the maximum safe impedance of the DOB, validated in experimentally in collision with high-stiffness environments and manual excitation.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
-
Nonparametric Inverse Dynamic Models for Multimodal Interactive Robots
Authors:
Kevin Haninger,
Masayoshi Tomizuka
Abstract:
Direct design of a robot's rendered dynamics, such as in impedance control, is now a well-established control mode in uncertain environments. When the physical interaction port variables are not measured directly, dynamic and kinematic models are required to relate the measured variables to the interaction port variables. A typical example is serial manipulators with joint torque sensors, where th…
▽ More
Direct design of a robot's rendered dynamics, such as in impedance control, is now a well-established control mode in uncertain environments. When the physical interaction port variables are not measured directly, dynamic and kinematic models are required to relate the measured variables to the interaction port variables. A typical example is serial manipulators with joint torque sensors, where the interaction occurs at the end-effector. As interactive robots perform increasingly complex tasks, they will be intermittently coupled with additional dynamic elements such as tools, grippers, or workpieces, some of which should be compensated and brought to the robot side of the interaction port, making the inverse dynamics multimodal. Furthermore, there may also be unavoidable and unmeasured external input when the desired system cannot be totally isolated. Towards semi-autonomous robots, capable of handling such applications, a multimodal Gaussian process regression approach to manipulator dynamic modelling is developed. A sampling-based approach clusters different dynamic modes from unlabelled data, also allowing the seperation of perturbed data with significant, irregular external input. The passivity of the overall approach is shown analytically, and experiments examine the performance and safety of this approach on a test actuator.
△ Less
Submitted 12 January, 2019;
originally announced January 2019.
-
Bounded Collision Force by the Sobolev Norm
Authors:
Kevin Haninger,
Dragoljub Surdilovic
Abstract:
A robot making contact with an environment or human presents potential safety risks, including excessive collision force. While experiments on the effect of robot inertia, relative velocity, and interface stiffness on collision are in literature, analytical models for maximum collision force are limited to a simplified mass-spring robot model. This simplified model limits the analysis of control (…
▽ More
A robot making contact with an environment or human presents potential safety risks, including excessive collision force. While experiments on the effect of robot inertia, relative velocity, and interface stiffness on collision are in literature, analytical models for maximum collision force are limited to a simplified mass-spring robot model. This simplified model limits the analysis of control (force/torque, impedance, or admittance) or compliant robots (joint and end-effector compliance). Here, the Sobolev norm is adapted to be a system norm, giving rigorous bounds on the maximum force on a stiffness element in a general dynamic system, allowing the study of collision with more accurate models and feedback control. The Sobolev norm can be found through the $\mathcal{H}_2$ norm of a transformed system, allowing efficient computation, connection with existing control theory, and controller synthesis to minimize collision force. The Sobolev norm is validated, first experimentally with an admittance-controlled robot, then in simulation with a linear flexible-joint robot. It is then used to investigate the impact of control, joint flexibility and end-effector compliance on collision, and a trade-off between collision performance and environmental estimation uncertainty is shown.
△ Less
Submitted 18 March, 2019; v1 submitted 8 October, 2018;
originally announced October 2018.
