Showing 1–22 of 22 results for author: González-Prelcic, N

Multicarrier ISAC: Advances in Waveform Design, Signal Processing and Learning under Non-Idealities

Authors: Visa Koivunen, Musa Furkan Keskin, Henk Wymeersch, Mikko Valkama, Nuria González-Prelcic

Abstract: This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna re… ▽ More This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna resources. Focusing on multicarrier (MC) systems, which represent the most widely used communication waveforms, it explores the co-design and optimization of waveforms alongside multiantenna transceiver signal processing for communications and both monostatic and bistatic sensing applications of ISAC. Moreover, techniques of high practical relevance for overcoming and even harnessing challenges posed by non-idealities in actual transceiver implementations are considered. To operate in highly dynamic radio environments and target scenarios, both model-based structured optimization and learning-based methodologies for ISAC systems are covered, assessing their adaptability and learning capabilities under real-world conditions. The paper presents trade-offs in communication-centric and radar-sensing-centric approaches, aiming for an optimized balance in densely used spectrum. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: To appear in IEEE Signal Processing Magazine

Integrated Monostatic Sensing and Full-Duplex Multiuser Communication for mmWave Systems

Authors: Murat Bayraktar, Nuria González-Prelcic, Mikko Valkama, Hao Chen, Charlie Jianzhong Zhang

Abstract: In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation… ▽ More In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation of self-interference (SI) caused by simultaneous transmission and reception at the FD base station (BS). Additionally, MU interference needs to be handled by the precoder/combiner design. The resulting optimization problem involves non-convex constraints since hybrid analog/digital architectures utilize networks of phase shifters. To solve the proposed problem, we separate the optimization of each precoder/combiner, and design each one of them while fixing the others. The precoders at the FD BS are designed by reformulating the communication and sensing constraints as signal-to-leakage-plus-noise ratio (SLNR) maximization problems that consider SI and MU interference as leakage. Furthermore, we design the frequency-flat analog combiner such that the residual SI at the FD BS is minimized under communication and sensing gain constraints. Finally, we design an interference-aware digital combining stage that separates MU signals and target reflections. The communication performance and sensing results show that the proposed framework efficiently supports both functionalities simultaneously. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 13 pages, 7 figures

Channel Estimation and Hybrid Precoding for Frequency Selective Multiuser mmWave MIMO Systems

Authors: J. P. González-Coma, J. Rodríguez-Fernández, N. González-Prelcic, L. Castedo, R. W. Heath

Abstract: Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the cha… ▽ More Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the channels from all the mobile stations (MSs) on each subcarrier. To reduce the number of measurements required, compressed sensing techniques are developed that exploit common support on the different subcarriers. In the second step, exploiting reciprocity and the channel estimates, the base station designs hybrid precoders and combiners. Two algorithms are developed for this purpose, with different performance and complexity tradeoffs: 1) a factorization of the purely digital solution, and 2) an iterative hybrid design. Extensive numerical experiments evaluate the proposed solutions comparing to state-of-the-art strategies, and illustrating design tradeoffs in overhead, complexity, and performance. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Journal ref: IEEE J. Sel. Top. Signal Process., vol. 12, no. 2, pp. 353-367, May 2018

Hybrid Precoding and Combining for mmWave Full-Duplex Joint Radar and Communication Systems under Self-Interference

Authors: Murat Bayraktar, Nuria González-Prelcic, Hao Chen

Abstract: In the context of integrated sensing and communication (ISAC), a full-duplex (FD) transceiver can operate as a monostatic radar while maintaining communication capabilities. This paper investigates the design of precoders and combiners for a joint radar and communication (JRC) system at mmWave frequencies. The primary goal of the design is to guarantee certain performance in terms of some sensing… ▽ More In the context of integrated sensing and communication (ISAC), a full-duplex (FD) transceiver can operate as a monostatic radar while maintaining communication capabilities. This paper investigates the design of precoders and combiners for a joint radar and communication (JRC) system at mmWave frequencies. The primary goal of the design is to guarantee certain performance in terms of some sensing and communication metrics while minimizing the self-interference (SI) caused by FD operation and taking into account the hardware limitations coming from a hybrid MIMO architecture. Specifically, we introduce a generalized eigenvalue-based precoder design that considers the downlink user rate, the radar gain, and the SI suppression. Since the hybrid analog/digital architecture degrades the SI mitigation capability of the precoder, we further enhance SI suppression with the analog combiner. Our numerical results demonstrate that the proposed architecture achieves the required radar gain and SI mitigation while incurring a small loss in downlink spectral efficiency. Additionally, the numerical experiments also show that the use of orthogonal frequency division multiplexing (OFDM) radar with the proposed beamforming architecture results in highly accurate range and velocity estimates for the detected targets. △ Less

Submitted 1 April, 2024; v1 submitted 25 November, 2023; originally announced November 2023.

Comments: Accepted to 2024 IEEE International Conference on Communications. 6 pages, 4 figures

Clock and Orientation-Robust Simultaneous Radio Localization and Map** at Millimeter Wave Bands

Authors: Felipe Gómez-Cuba, Gonzalo Feijoo-Rodríguez, Nuria González-Prelcic

Abstract: This paper proposes a radio simultaneous location and map** (radio-SLAM) scheme based on sparse multipath channel estimation. By leveraging sparse channel estimation schemes at millimeter wave bands, namely high resolution estimates of the multipath angle of arrival (AoA), time difference of arrival (TDoA), and angle of departure (AoD), we develop a radio-SLAM algorithm that operates without any… ▽ More This paper proposes a radio simultaneous location and map** (radio-SLAM) scheme based on sparse multipath channel estimation. By leveraging sparse channel estimation schemes at millimeter wave bands, namely high resolution estimates of the multipath angle of arrival (AoA), time difference of arrival (TDoA), and angle of departure (AoD), we develop a radio-SLAM algorithm that operates without any requirements of clock synchronization, receiver orientation knowledge, multiple anchor points, or two-way protocols. Thanks to the AoD information obtained via compressed sensing (CS) of the channel, the proposed scheme can estimate the receiver clock offset and orientation from a single anchor transmission, achieving sub-meter accuracy in a realistic typical channel simulation. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Comments: This is the author's pre-print version of a paper accepted for presentation in IEEE WCNC 2023, Glasgow, Scotland

Deep Learning-based Compressive Beam Alignment in mmWave Vehicular Systems

Authors: Yuyang Wang, Nitin Jonathan Myers, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this… ▽ More Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this paper, we propose a deep learning-based technique to design a structured compressed sensing (CS) matrix that is well suited to the underlying channel distribution for mmWave vehicular beam alignment. The proposed approach leverages both sparsity and the particular spatial structure that appears in vehicular channels. We model the compressive channel acquisition by a two-dimensional (2D) convolutional layer followed by dropout. We design fully-connected layers to optimize channel acquisition and beam alignment. We incorporate the low-resolution phase shifter constraint during neural network training by using projected gradient descent for weight updates. Furthermore, we exploit channel spectral structure to optimize the power allocated for different subcarriers. Simulations indicate that our deep learning-based approach achieves better beam alignment than standard CS techniques which use random phase shift-based design. Numerical experiments also show that one single subcarrier is sufficient to provide necessary information for beam alignment. △ Less

Submitted 26 February, 2021; originally announced March 2021.

Comments: Submitted to the IEEE Transactions on Wireless Communications. Copyright may be transferred without notice, after which this version may no longer be accessible

Leveraging Sensing at the Infrastructure for mmWave Communication

Authors: Anum Ali, Nuria González-Prelcic, Robert W. Heath Jr., Amitava Ghosh

Abstract: Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will b… ▽ More Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will be part of future smart cities) for mmWave communication. We provide numerical and measurement results to demonstrate that information from these infrastructure sensors reduces the mmWave array configuration overhead. Finally, we outline future research directions to help materialize the use of infrastructure sensors for mmWave communication. △ Less

Submitted 21 November, 2019; originally announced November 2019.

Passive Radar at the Roadside Unit to Configure Millimeter Wave Vehicle-to-Infrastructure Links

Authors: Anum Ali, Nuria González-Prelcic, Amitava Ghosh

Abstract: Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. T… ▽ More Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. The spatial covariance of the received radar signals will be estimated and used to establish the communication link. We propose a simplified radar receiver that does not require the transmitted waveform as a reference. To leverage the radar information for beamforming, the radar azimuth power spectrum (APS) and the communication APS should be similar. We outline a radar covariance correction strategy to increase the similarity between the radar and communication APS. We also propose a metric to compare the similarity of the radar and communication APS that has a connection with the achievable rate. We present simulation results based on ray-tracing data. The results show that: (i) covariance correction improves the similarity of radar and communication APS, and (ii) the radar-assisted strategy significantly reduces the training overhead, being particularly useful in non-line-of-sight scenarios. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Dictionary Learning for Channel Estimation in Hybrid Frequency-Selective mmWave MIMO Systems

Authors: Hongxiang Xie, Javier Rodríguez-Fernández, Nuria González-Prelcic

Abstract: Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutua… ▽ More Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutual coupling effects, etc. We propose two dictionary learning (DL) algorithms to learn the best sparsifying dictionaries for channel matrices from observations obtained with hybrid frequency-selective mmWave multiple-input-multiple-output (MIMO) systems. First, we optimize the combined dictionary, i.e., the Kronecker product of transmit and receive dictionaries, as it is used in practice to sparsify the channel matrix. Second, considering the different array structures at the transmitter and receiver, we exploit separable DL to find the best transmit and receive dictionaries. Once the channel is expressed in terms of the optimized dictionaries, various CS-based sparse recovery techniques can be applied for low overhead channel estimation. The proposed DL algorithms perform well under low SNR conditions inherent to any mmWave communication systems before the precoders/combiners can be optimized. The effectiveness of the proposed DL algorithms has been corroborated via numerical simulations with different system configurations, array geometries and hardware impairments. △ Less

Submitted 19 September, 2019; originally announced September 2019.

Comments: 30 pages, 8 figures, journal

Spatial Channel Covariance Estimation for Hybrid Architectures Based on Tensor Decompositions

Authors: Sungwoo Park, Anum Ali, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance… ▽ More Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance estimation method based on higher-order tensor decomposition for spatially sparse time-varying frequency-selective channels. The proposed method leverages the fact that the channel can be represented as a low-rank higher-order tensor. We also derive the Cramér-Rao lower bound on the estimation accuracy of the proposed method. Numerical results and theoretical analysis show that the proposed tensor-based approach achieves higher estimation accuracy in comparison with prior compressive-sensing-based approaches or conventional angle-of-arrival estimation approaches. Simulation results reveal that the proposed approach becomes more beneficial at low signal-to-noise (SNR) region. △ Less

Submitted 17 February, 2019; originally announced February 2019.

Spatial Covariance Estimation for Millimeter Wave Hybrid Systems using Out-of-Band Information

Authors: Anum Ali, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: In high mobility applications of millimeter wave (mmWave) communications, e.g., vehicle-to-everything communication and next-generation cellular communication, frequent link configuration can be a source of significant overhead. We use the sub-6 GHz channel covariance as an out-of-band side information for mmWave link configuration. Assuming: (i) a fully digital architecture at sub-6 GHz; and (ii)… ▽ More In high mobility applications of millimeter wave (mmWave) communications, e.g., vehicle-to-everything communication and next-generation cellular communication, frequent link configuration can be a source of significant overhead. We use the sub-6 GHz channel covariance as an out-of-band side information for mmWave link configuration. Assuming: (i) a fully digital architecture at sub-6 GHz; and (ii) a hybrid analog-digital architecture at mmWave, we propose an out-of-band covariance translation approach and an out-of-band aided compressed covariance estimation approach. For covariance translation, we estimate the parameters of sub-6 GHz covariance and use them in theoretical expressions of covariance matrices to predict the mmWave covariance. For out-of-band aided covariance estimation, we use weighted sparse signal recovery to incorporate out-of-band information in compressed covariance estimation. The out-of-band covariance translation eliminates the in-band training completely, whereas out-of-band aided covariance estimation relies on in-band as well as out-of-band training. We also analyze the loss in the signal-to-noise ratio due to an imperfect estimate of the covariance. The simulation results show that the proposed covariance estimation strategies can reduce the training overhead compared to the in-band only covariance estimation. △ Less

Submitted 26 April, 2018; originally announced April 2018.

Comments: arXiv admin note: text overlap with arXiv:1702.08574

Algorithms for the Construction of Incoherent Frames Under Various Design Constraints

Authors: Cristian Rusu, Nuria Gonzalez-Prelcic, Robert W. Heath Jr

Abstract: Unit norm finite frames are generalizations of orthonormal bases with many applications in signal processing. An important property of a frame is its coherence, a measure of how close any two vectors of the frame are to each other. Low coherence frames are useful in compressed sensing applications. When used as measurement matrices, they successfully recover highly sparse solutions to linear inver… ▽ More Unit norm finite frames are generalizations of orthonormal bases with many applications in signal processing. An important property of a frame is its coherence, a measure of how close any two vectors of the frame are to each other. Low coherence frames are useful in compressed sensing applications. When used as measurement matrices, they successfully recover highly sparse solutions to linear inverse problems. This paper describes algorithms for the design of various low coherence frame types: real, complex, unital (constant magnitude) complex, sparse real and complex, nonnegative real and complex, and harmonic (selection of rows from Fourier matrices). The proposed methods are based on solving a sequence of convex optimization problems that update each vector of the frame. This update reduces the coherence with the other frame vectors, while other constraints on its entries are also imposed. Numerical experiments show the effectiveness of the methods compared to the Welch bound, as well as other competing algorithms, in compressed sensing applications. △ Less

Submitted 20 June, 2018; v1 submitted 29 January, 2018; originally announced January 2018.

Joint Data-Aided Carrier Frequency Offset, Phase Offset, Amplitude and SNR Estimation for Millimeter-Wave MIMO Systems

Authors: Javier Rodríguez-Fernández, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: This work is devoted to solve the problem of estimating the carrier frequency offset, phase offset, amplitude, and SNR between two mmWave transceivers. The Cramér-Rao Lower Bound (CRLB) for the different parameters is provided first, as well as the condition for the CRLB to exist, known as Regularity Condition. Thereafter, the problem of finding suitable estimators for the parameters is adressed… ▽ More This work is devoted to solve the problem of estimating the carrier frequency offset, phase offset, amplitude, and SNR between two mmWave transceivers. The Cramér-Rao Lower Bound (CRLB) for the different parameters is provided first, as well as the condition for the CRLB to exist, known as Regularity Condition. Thereafter, the problem of finding suitable estimators for the parameters is adressed, for which the proposed solution is the Maximum Likelihood estimator (ML). △ Less

Submitted 16 December, 2017; originally announced December 2017.

Frequency-domain Compressive Channel Estimation for Frequency-Selective Hybrid mmWave MIMO Systems

Authors: Javier Rodríguez-Fernández, Nuria González-Prelcic, Kiran Venugopal, Robert W. Heath Jr

Abstract: Channel estimation is useful in millimeter wave (mmWave) MIMO communication systems. Channel state information allows optimized designs of precoders and combiners under different metrics such as mutual information or signal-to-interference-noise (SINR) ratio. At mmWave, MIMO precoders and combiners are usually hybrid, since this architecture provides a means to trade-off power consumption and achi… ▽ More Channel estimation is useful in millimeter wave (mmWave) MIMO communication systems. Channel state information allows optimized designs of precoders and combiners under different metrics such as mutual information or signal-to-interference-noise (SINR) ratio. At mmWave, MIMO precoders and combiners are usually hybrid, since this architecture provides a means to trade-off power consumption and achievable rate. Channel estimation is challenging when using these architectures, however, since there is no direct access to the outputs of the different antenna elements in the array. The MIMO channel can only be observed through the analog combining network, which acts as a compression stage of the received signal. Most of prior work on channel estimation for hybrid architectures assumes a frequency-flat mmWave channel model. In this paper, we consider a frequency-selective mmWave channel and propose compressed-sensing-based strategies to estimate the channel in the frequency domain. We evaluate different algorithms and compute their complexity to expose trade-offs in complexity-overhead-performance as compared to those of previous approaches. △ Less

Submitted 27 April, 2017; originally announced April 2017.

Millimeter Wave communication with out-of-band information

Authors: Nuria González-Prelcic, Anum Ali, Vutha Va, Robert W. Heath Jr

Abstract: Configuring the antenna arrays is the main source of overhead in millimeter wave (mmWave) communication systems. In high mobility scenarios, the problem is exacerbated, as achieving the highest rates requires frequent link reconfiguration. One solution is to exploit spatial congruence between signals at different frequency bands and extract mmWave channel parameters from side information obtained… ▽ More Configuring the antenna arrays is the main source of overhead in millimeter wave (mmWave) communication systems. In high mobility scenarios, the problem is exacerbated, as achieving the highest rates requires frequent link reconfiguration. One solution is to exploit spatial congruence between signals at different frequency bands and extract mmWave channel parameters from side information obtained in another band. In this paper we propose the concept of out-of-band information aided mmWave communication. We analyze different strategies to leverage information derived from sensors or from other communication systems operating at sub-6 GHz bands to help configure the mmWave communication link. The overhead reductions that can be obtained when exploiting out-of-band information are characterized in a preliminary study. Finally, the challenges associated with using out-of-band signals as a source of side information at mmWave are analyzed in detail. △ Less

Submitted 3 May, 2017; v1 submitted 30 March, 2017; originally announced March 2017.

Comments: 14 pages, 6 figures

Millimeter Wave Beam-Selection Using Out-of-Band Spatial Information

Authors: Anum Ali, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave (mmWave) communication is one feasible solution for high data-rate applications like vehicular-to-everything communication and next generation cellular communication. Configuring mmWave links, which can be done through channel estimation or beam-selection, however, is a source of significant overhead. In this paper, we propose to use spatial information extracted at sub-6 GHz to he… ▽ More Millimeter wave (mmWave) communication is one feasible solution for high data-rate applications like vehicular-to-everything communication and next generation cellular communication. Configuring mmWave links, which can be done through channel estimation or beam-selection, however, is a source of significant overhead. In this paper, we propose to use spatial information extracted at sub-6 GHz to help establish the mmWave link. First, we review the prior work on frequency dependent channel behavior and outline a simulation strategy to generate multi-band frequency dependent channels. Second, assuming: (i) narrowband channels and a fully digital architecture at sub-6 GHz; and (ii) wideband frequency selective channels, OFDM signaling, and an analog architecture at mmWave, we outline strategies to incorporate sub-6 GHz spatial information in mmWave compressed beam selection. We formulate compressed beam-selection as a weighted sparse signal recovery problem, and obtain the weighting information from sub-6 GHz channels. In addition, we outline a structured precoder/combiner design to tailor the training to out-of-band information. We also extend the proposed out-of-band aided compressed beam-selection approach to leverage information from all active OFDM subcarriers. The simulation results for achievable rate show that out-of-band aided beam-selection can reduce the training overhead of in-band only beam-selection by 4x. △ Less

Submitted 27 February, 2017; originally announced February 2017.

Comments: 30 pages, 11 figures

IEEE 802.11ad-based Radar: An Approach to Joint Vehicular Communication-Radar System

Authors: Preeti Kumari, Junil Choi, Nuria Gonzalez-Prelcic, Robert W. Heath Jr

Abstract: Millimeter-wave (mmWave) radar is widely used in vehicles for applications such as adaptive cruise control and collision avoidance. In this paper, we propose an IEEE 802.11ad-based radar for long-range radar (LRR) applications at the 60 GHz unlicensed band. We exploit the preamble of a single-carrier (SC) physical layer (PHY) frame, which consists of Golay complementary sequences with good correla… ▽ More Millimeter-wave (mmWave) radar is widely used in vehicles for applications such as adaptive cruise control and collision avoidance. In this paper, we propose an IEEE 802.11ad-based radar for long-range radar (LRR) applications at the 60 GHz unlicensed band. We exploit the preamble of a single-carrier (SC) physical layer (PHY) frame, which consists of Golay complementary sequences with good correlation properties, as a radar waveform. This system enables a joint waveform for automotive radar and a potential mmWave vehicular communication system based on IEEE 802.11ad, allowing hardware reuse. To formulate an integrated framework of vehicle-to-vehicle (V2V) communication and LRR based on a mmWave consumer wireless local area network (WLAN) standard, we make typical assumptions for LRR applications and incorporate the full duplex radar assumption due to the possibility of sufficient isolation and self-interference cancellation. We develop single- and multi-frame radar receiver algorithms for target detection as well as range and velocity estimation within a coherent processing interval. Our proposed radar processing algorithms leverage channel estimation and time-frequency synchronization techniques used in a conventional IEEE 802.11ad receiver with minimal modifications. Analysis and simulations show that in a single target scenario, a Gbps data rate is achieved simultaneously with cm-level range accuracy and cm/s-level velocity accuracy. The target vehicle is detected with a high probability of detection ($>$99.9$\%$) at a low false alarm of 10$^{-6}$ for an equivalent isotropically radiated power (EIRP) of 43 dBm up to a vehicle separation distance of 200 m. △ Less

Submitted 19 February, 2017; originally announced February 2017.

Fast Orthonormal Sparsifying Transforms Based on Householder Reflectors

Authors: Cristian Rusu, Nuria Gonzalez-Prelcic, Robert Heath

Abstract: Dictionary learning is the task of determining a data-dependent transform that yields a sparse representation of some observed data. The dictionary learning problem is non-convex, and usually solved via computationally complex iterative algorithms. Furthermore, the resulting transforms obtained generally lack structure that permits their fast application to data. To address this issue, this paper… ▽ More Dictionary learning is the task of determining a data-dependent transform that yields a sparse representation of some observed data. The dictionary learning problem is non-convex, and usually solved via computationally complex iterative algorithms. Furthermore, the resulting transforms obtained generally lack structure that permits their fast application to data. To address this issue, this paper develops a framework for learning orthonormal dictionaries which are built from products of a few Householder reflectors. Two algorithms are proposed to learn the reflector coefficients: one that considers a sequential update of the reflectors and one with a simultaneous update of all reflectors that imposes an additional internal orthogonal constraint. The proposed methods have low computational complexity and are shown to converge to local minimum points which can be described in terms of the spectral properties of the matrices involved. The resulting dictionaries balance between the computational complexity and the quality of the sparse representations by controlling the number of Householder reflectors in their product. Simulations of the proposed algorithms are shown in the image processing setting where well-known fast transforms are available for comparisons. The proposed algorithms have favorable reconstruction error and the advantage of a fast implementation relative to the classical, unstructured, dictionaries. △ Less

Submitted 24 November, 2016; originally announced November 2016.

Millimeter Wave Vehicular Communication to Support Massive Automotive Sensing

Authors: Junil Choi, Vutha Va, Nuria Gonzalez-Prelcic, Robert Daniels, Chandra R. Bhat, Robert W. Heath Jr

Abstract: As driving becomes more automated, vehicles are being equipped with more sensors generating even higher data rates. Radars (RAdio Detection and Ranging) are used for object detection, visual cameras as virtual mirrors, and LIDARs (LIght Detection and Ranging) for generating high resolution depth associated range maps, all to enhance the safety and efficiency of driving. Connected vehicles can use… ▽ More As driving becomes more automated, vehicles are being equipped with more sensors generating even higher data rates. Radars (RAdio Detection and Ranging) are used for object detection, visual cameras as virtual mirrors, and LIDARs (LIght Detection and Ranging) for generating high resolution depth associated range maps, all to enhance the safety and efficiency of driving. Connected vehicles can use wireless communication to exchange sensor data, allowing them to enlarge their sensing range and improve automated driving functions. Unfortunately, conventional technologies, such as dedicated short-range communication (DSRC) and 4G cellular communication, do not support the gigabit-per-second data rates that would be required for raw sensor data exchange between vehicles. This paper makes the case that millimeter wave (mmWave) communication is the only viable approach for high bandwidth connected vehicles. The motivations and challenges associated with using mmWave for vehicle-to-vehicle and vehicle-to-infrastructure applications are highlighted. A high-level solution to one key challenge - the overhead of mmWave beam training - is proposed. The critical feature of this solution is to leverage information derived from the sensors or DSRC as side information for the mmWave communication link configuration. Examples and simulation results show that the beam alignment overhead can be reduced by using position information obtained from DSRC. △ Less

Submitted 18 May, 2016; v1 submitted 20 February, 2016; originally announced February 2016.

Comments: 7 pages, 5 figures, 1 table, submitted to IEEE Communications Magazine

Hybrid MIMO Architectures for Millimeter Wave Communications: Phase Shifters or Switches?

Authors: Roi Méndez-Rial, Cristian Rusu, Nuria González-Prelcic, Ahmed Alkhateeb, Robert W. Heath Jr

Abstract: Hybrid analog/digital MIMO architectures were recently proposed as an alternative for fully-digitalprecoding in millimeter wave (mmWave) wireless communication systems. This is motivated by the possible reduction in the number of RF chains and analog-to-digital converters. In these architectures, the analog processing network is usually based on variable phase shifters. In this paper, we propose h… ▽ More Hybrid analog/digital MIMO architectures were recently proposed as an alternative for fully-digitalprecoding in millimeter wave (mmWave) wireless communication systems. This is motivated by the possible reduction in the number of RF chains and analog-to-digital converters. In these architectures, the analog processing network is usually based on variable phase shifters. In this paper, we propose hybrid architectures based on switching networks to reduce the complexity and the power consumption of the structures based on phase shifters. We define a power consumption model and use it to evaluate the energy efficiency of both structures. To estimate the complete MIMO channel, we propose an open loop compressive channel estimation technique which is independent of the hardware used in the analog processing stage. We analyze the performance of the new estimation algorithm for hybrid architectures based on phase shifters and switches. Using the estimated, we develop two algorithms for the design of the hybrid combiner based on switches and analyze the achieved spectral efficiency. Finally, we study the trade-offs between power consumption, hardware complexity, and spectral efficiency for hybrid architectures based on phase shifting networks and switching networks. Numerical results show that architectures based on switches obtain equal or better channel estimation performance to that obtained using phase shifters, while reducing hardware complexity and power consumption. For equal power consumption, all the hybrid architectures provide similar spectral efficiencies. △ Less

Submitted 9 December, 2015; originally announced December 2015.

Comments: Submitted to IEEE Access

An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems

Authors: Robert W. Heath Jr., Nuria Gonzalez-Prelcic, Sundeep Rangan, Wonil Roh, Akbar Sayeed

Abstract: Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc… ▽ More Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies. △ Less

Submitted 9 December, 2015; originally announced December 2015.

Comments: Submitted to IEEE Journal of Selected Topics in Signal Processing

Optimized Compressed Sensing via Incoherent Frames Designed by Convex Optimization

Authors: Cristian Rusu, Nuria González-Prelcic

Abstract: The construction of highly incoherent frames, sequences of vectors placed on the unit hyper sphere of a finite dimensional Hilbert space with low correlation between them, has proven very difficult. Algorithms proposed in the past have focused in minimizing the absolute value off-diagonal entries of the Gram matrix of these structures. Recently, a method based on convex optimization that operates… ▽ More The construction of highly incoherent frames, sequences of vectors placed on the unit hyper sphere of a finite dimensional Hilbert space with low correlation between them, has proven very difficult. Algorithms proposed in the past have focused in minimizing the absolute value off-diagonal entries of the Gram matrix of these structures. Recently, a method based on convex optimization that operates directly on the vectors of the frame has been shown to produce promising results. This paper gives a detailed analysis of the optimization problem at the heart of this approach and, based on these insights, proposes a new method that substantially outperforms the initial approach and all current methods in the literature for all types of frames, with low and high redundancy. We give extensive experimental results that show the effectiveness of the proposed method and its application to optimized compressed sensing. △ Less

Submitted 24 November, 2016; v1 submitted 9 July, 2015; originally announced July 2015.