-
An efficient two-dimensional heat transfer model for building envelopes
Authors:
Julien Berger,
Suelen Gasparin,
Walter Mazuroski,
Nathan Mendes
Abstract:
A two-dimensional model is proposed for energy efficiency assessment through the simulation of heat transfer in building envelopes, considering the influence of the surrounding environment. The model is based on the \DF ~approach that provides an explicit scheme with a relaxed stability condition. The model is first validated using an analytical solution and then compared to three other standard s…
▽ More
A two-dimensional model is proposed for energy efficiency assessment through the simulation of heat transfer in building envelopes, considering the influence of the surrounding environment. The model is based on the \DF ~approach that provides an explicit scheme with a relaxed stability condition. The model is first validated using an analytical solution and then compared to three other standard schemes. Results show that the proposed model offers a good compromise in terms of high accuracy and reduced computational efforts. Then, a more complex case study is investigated, considering non-uniform shading effects due to the neighboring buildings. In addition, the surface heat transfer coefficient varies with wind velocity and height, which imposes an addition non-uniform boundary condition. After showing the reliability of the model prediction, a comparison over almost $120$ cities in France is carried out between the two- and the one-dimensional approaches of the current building simulation programs. Important discrepancies are observed for regions with high magnitudes of solar radiation and wind velocity. Last, a sensitivity analysis is carried out using a derivative-based approach. It enables to assess the variability of the solution according to the modeling of the two-dimensional boundary conditions. Moreover, the proposed model computes efficiently the solution and its sensitivity to the modeling of the urban environment.
△ Less
Submitted 17 November, 2021;
originally announced November 2021.
-
On the comparison of three numerical methods applied to building simulation: finite-differences, RC circuit approximation and a spectral method
Authors:
Julien Berger,
Suelen Gasparin,
Denys Dutykh,
Nathan Mendes
Abstract:
Predictions of physical phenomena in buildings are carried out by using physical models formulated as a mathematical problem and solved by means of numerical methods, aiming at evaluating, for instance, the building thermal or hygrothermal performance by calculating distributions and fluxes of heat and moisture transfer. Therefore, the choice of the numerical method is crucial since it is a compro…
▽ More
Predictions of physical phenomena in buildings are carried out by using physical models formulated as a mathematical problem and solved by means of numerical methods, aiming at evaluating, for instance, the building thermal or hygrothermal performance by calculating distributions and fluxes of heat and moisture transfer. Therefore, the choice of the numerical method is crucial since it is a compromise among (i) the solution accuracy, (ii) the computational cost to obtain the solution and (iii) the complexity of the method implementation. An efficient numerical method enables to compute an accurate solution with a minimum computational run time (CPU). On that account, this article brings an investigation on the performance of three numerical methods. The first one is the standard and widely used finite-difference approach, while the second one is the so-called RC approach, which is a particular method brought to the building physics area by means of an analogy of electric circuits. The third numerical method is the spectral one, which has been recently proposed to solve nonlinear diffusive problems in building physics. The three methods are evaluated in terms of accuracy on the assessment of the dependent variable (temperature or vapor pressure) or of density of fluxes for three different cases: i) heat diffusion through a concrete slab, ii) moisture diffusion through an aerated concrete slab and iii) heat diffusion using measured temperatures as boundary conditions. Results highlight the spectral approach as the most accurate method. The RC based model with a few number of resistances does not provide accurate results for temperature and vapor pressure distributions neither to flux densities nor conduction loads.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
An innovative method to determine optimum insulation thickness based on non-uniform adaptive moving grid
Authors:
Suelen Gasparin,
Julien Berger,
Denys Dutykh,
Nathan Mendes
Abstract:
It is well known that thermal insulation is a leading strategy for reducing energy consumption associated to heating or cooling processes in buildings. Nevertheless, building insulation can generate high expenditures so that the selection of an optimum insulation thickness requires a detailed energy simulation as well as an economic analysis. In this way, the present study proposes an innovative n…
▽ More
It is well known that thermal insulation is a leading strategy for reducing energy consumption associated to heating or cooling processes in buildings. Nevertheless, building insulation can generate high expenditures so that the selection of an optimum insulation thickness requires a detailed energy simulation as well as an economic analysis. In this way, the present study proposes an innovative non-uniform adaptive method to determine the optimal insulation thickness of external walls. First, the method is compared with a reference solution to properly understand the features of the method, which can provide high accuracy with less spatial nodes. Then, the adaptive method is used to simulate the transient heat conduction through the building envelope of buildings located in Brazil, where there is a large potential of energy reduction. Simulations have been efficiently carried out for different wall and roof configurations, showing that the innovative method efficiently provides a gain of 25% on the computer run time.
△ Less
Submitted 26 February, 2019;
originally announced March 2019.
-
An adaptive simulation of nonlinear heat and moisture transfer as a boundary value problem
Authors:
Suelen Gasparin,
Julien Berger,
Denys Dutykh,
Nathan Mendes
Abstract:
This work presents an alternative view on the numerical simulation of diffusion processes applied to the heat and moisture transfer through porous building materials. Traditionally, by using the finite-difference approach, the discretization follows the Method Of Lines (MOL), when the problem is first discretized in space to obtain a large system of coupled Ordinary Differential Equations (ODEs).…
▽ More
This work presents an alternative view on the numerical simulation of diffusion processes applied to the heat and moisture transfer through porous building materials. Traditionally, by using the finite-difference approach, the discretization follows the Method Of Lines (MOL), when the problem is first discretized in space to obtain a large system of coupled Ordinary Differential Equations (ODEs). Thus, this paper proposes to change this viewpoint. First, we discretize in time to obtain a small system of coupled ODEs, which means instead of having a Cauchy (Initial Value) Problem (IVP), we have a Boundary Value Problem (BVP). Fortunately, BVPs can be solved efficiently today using adaptive collocation methods of high order. To demonstrate the benefits of this new approach, three case studies are presented, in which one of them is compared with experimental data. The first one considers nonlinear heat and moisture transfer through one material layer while the second one considers two material layers. Results show how the nonlinearities and the interface between materials are easily treated, by reasonably using a fourth-order adaptive method. Finally, the last case study compares numerical results with experimental measurements, showing a good agreement.
△ Less
Submitted 18 February, 2019;
originally announced February 2019.
-
A spectral method for solving heat and moisture transfer through consolidated porous media
Authors:
Suelen Gasparin,
Denys Dutykh,
Nathan Mendes
Abstract:
This work presents an efficient numerical method based on spectral expansions for simulation of heat and moisture diffusive transfers through multilayered porous materials. Traditionally, by using the finite-difference approach, the problem is discretized in time and space domains (Method of lines) to obtain a large system of coupled Ordinary Differential Equations (ODEs), which is computationally…
▽ More
This work presents an efficient numerical method based on spectral expansions for simulation of heat and moisture diffusive transfers through multilayered porous materials. Traditionally, by using the finite-difference approach, the problem is discretized in time and space domains (Method of lines) to obtain a large system of coupled Ordinary Differential Equations (ODEs), which is computationally expensive. To avoid such a cost, this paper proposes a reduced-order method that is faster and accurate, using a much smaller system of ODEs. To demonstrate the benefits of this approach, tree case studies are presented. The first one considers nonlinear heat and moisture transfer through one material layer. The second case - highly nonlinear - imposes a high moisture content gradient - simulating a rain like condition - over a two-layered domain, while the last one compares the numerical prediction against experimental data for validation purposes. Results show how the nonlinearities and the interface between materials are easily and naturally treated with the spectral reduced-order method. Concerning the reliability part, predictions show a good agreement with experimental results, which confirm robustness, calculation efficiency and high accuracy of the proposed approach for predicting the coupled heat and moisture transfer through porous materials.
△ Less
Submitted 19 February, 2019;
originally announced February 2019.
-
An improved explicit scheme for whole-building hygrothermal simulation
Authors:
Suelen Gasparin,
Julien Berger,
Denys Dutykh,
Nathan Mendes
Abstract:
Implicit schemes require important sub-iterations when dealing with highly nonlinear problems such as the combined heat and moisture transfer through porous building elements. The computational cost rises significantly when the whole-building is simulated, especially when there is important coupling among the building elements themselves with neighbouring zones and with HVAC (Heating Ventilation a…
▽ More
Implicit schemes require important sub-iterations when dealing with highly nonlinear problems such as the combined heat and moisture transfer through porous building elements. The computational cost rises significantly when the whole-building is simulated, especially when there is important coupling among the building elements themselves with neighbouring zones and with HVAC (Heating Ventilation and Air Conditioning) systems. On the other hand, the classical Euler explicit scheme is generally not used because its stability condition imposes very fine time discretisation. Hence, this paper explores the use of an improved explicit approach - the Dufort-Frankel scheme - to overcome the disadvantage of the classical explicit one and to bring benefits that cannot be obtained by implicit methods. The Dufort-Frankel approach is first compared to the classical Euler implicit and explicit schemes to compute the solution of nonlinear heat and moisture transfer through porous materials. Then, the analysis of the Dufort-Frankel unconditionally stable explicit scheme is extended to the coupled heat and moisture balances on the scale of a one- and a two-zone building models. The Dufort-Frankel scheme has the benefits of being unconditionally stable, second-order accurate in time O(dt^2) and to compute explicitly the solution at each time step, avoiding costly sub-iterations. This approach may reduce the computational cost by twenty, as well as it may enable perfect synchronism for whole-building simulation and co-simulation.
△ Less
Submitted 18 April, 2018; v1 submitted 28 March, 2017;
originally announced March 2017.
-
Stable explicit schemes for simulation of nonlinear moisture transfer in porous materials
Authors:
Suelen Gasparin,
Julien Berger,
Denys Dutykh,
Nathan Mendes
Abstract:
Implicit schemes have been extensively used in building physics to compute the solution of moisture diffusion problems in porous materials for improving stability conditions. Nevertheless, these schemes require important sub-iterations when treating non-linear problems. To overcome this disadvantage, this paper explores the use of improved explicit schemes, such as Dufort-Frankel, Crank-Nicolson a…
▽ More
Implicit schemes have been extensively used in building physics to compute the solution of moisture diffusion problems in porous materials for improving stability conditions. Nevertheless, these schemes require important sub-iterations when treating non-linear problems. To overcome this disadvantage, this paper explores the use of improved explicit schemes, such as Dufort-Frankel, Crank-Nicolson and hyperbolisation approaches. A first case study has been considered with the hypothesis of linear transfer. The Dufort-Frankel, Crank-Nicolson and hyperbolisation schemes were compared to the classical Euler explicit scheme and to a reference solution. Results have shown that the hyperbolisation scheme has a stability condition higher than the standard Courant-Friedrichs-Lewy (CFL) condition. The error of this schemes depends on the parameter τrepresenting the hyperbolicity magnitude added into the equation. The Dufort-Frankel scheme has the advantages of being unconditionally stable and is preferable for non-linear transfer, which is the second case study. Results have shown the error is proportional to O(Δt). A modified Crank-Nicolson scheme has been proposed in order to avoid sub-iterations to treat the non-linearities at each time step. The main advantages of the Dufort-Frankel scheme are (i) to be twice faster than the Crank-Nicolson approach; (ii) to compute explicitly the solution at each time step; (iii) to be unconditionally stable and (iv) easier to parallelise on high-performance computer systems. Although the approach is unconditionally stable, the choice of the time discretisation $Δt$ remains an important issue to accurately represent the physical phenomena.
△ Less
Submitted 28 March, 2017; v1 submitted 20 January, 2017;
originally announced January 2017.
-
Accurate numerical simulation of moisture front in porous material
Authors:
Julien Berger,
Suelen Gasparin,
Denys Dutykh,
Nathan Mendes
Abstract:
When comparing measurements to numerical simulations of moisture transfer through porous materials a rush of the experimental moisture front is commonly observed in several works shown in the literature, with transient models that consider only the diffusion process. Thus, to overcome the discrepancies between the experimental and the numerical models, this paper proposes to include the moisture a…
▽ More
When comparing measurements to numerical simulations of moisture transfer through porous materials a rush of the experimental moisture front is commonly observed in several works shown in the literature, with transient models that consider only the diffusion process. Thus, to overcome the discrepancies between the experimental and the numerical models, this paper proposes to include the moisture advection transfer in the governing equation. To solve the advection-diffusion differential equation, it is first proposed two efficient numerical schemes and their efficiencies are investigated for both linear and nonlinear cases. The first scheme, Scharfetter-Gummel (SG), presents a Courant-Friedrichs-Lewy (CFL) condition but is more accurate and faster than the second scheme, the well-known Crank-Nicolson approach. Furthermore, the SG scheme has the advantages of being well-balanced and asymptotically preserved. Then, to conclude, results of the convective moisture transfer problem obtained with the SG numerical scheme are compared to experimental data from the literature. The inclusion of an advective term in the model may clearly lead to better results than purely diffusive models.
△ Less
Submitted 23 March, 2018; v1 submitted 22 December, 2016;
originally announced December 2016.