-
Compressive Time Delay Estimation Using Interpolation
Authors:
Karsten Fyhn,
Marco F. Duarte,
Søren Holdt Jensen
Abstract:
Time delay estimation has long been an active area of research. In this work, we show that compressive sensing with interpolation may be used to achieve good estimation precision while lowering the sampling frequency. We propose an Interpolating Band-Excluded Orthogonal Matching Pursuit algorithm that uses one of two interpolation functions to estimate the time delay parameter. The numerical resul…
▽ More
Time delay estimation has long been an active area of research. In this work, we show that compressive sensing with interpolation may be used to achieve good estimation precision while lowering the sampling frequency. We propose an Interpolating Band-Excluded Orthogonal Matching Pursuit algorithm that uses one of two interpolation functions to estimate the time delay parameter. The numerical results show that interpolation improves estimation precision and that compressive sensing provides an elegant tradeoff that may lower the required sampling frequency while still attaining a desired estimation performance.
△ Less
Submitted 11 June, 2013;
originally announced June 2013.
-
Compressive Parameter Estimation for Sparse Translation-Invariant Signals Using Polar Interpolation
Authors:
Karsten Fyhn,
Marco F. Duarte,
Søren Holdt Jensen
Abstract:
We propose new compressive parameter estimation algorithms that make use of polar interpolation to improve the estimator precision. Our work extends previous approaches involving polar interpolation for compressive parameter estimation in two aspects: (i) we extend the formulation from real non-negative amplitude parameters to arbitrary complex ones, and (ii) we allow for mismatch between the mani…
▽ More
We propose new compressive parameter estimation algorithms that make use of polar interpolation to improve the estimator precision. Our work extends previous approaches involving polar interpolation for compressive parameter estimation in two aspects: (i) we extend the formulation from real non-negative amplitude parameters to arbitrary complex ones, and (ii) we allow for mismatch between the manifold described by the parameters and its polar approximation. To quantify the improvements afforded by the proposed extensions, we evaluate six algorithms for estimation of parameters in sparse translation-invariant signals, exemplified with the time delay estimation problem. The evaluation is based on three performance metrics: estimator precision, sampling rate and computational complexity. We use compressive sensing with all the algorithms to lower the necessary sampling rate and show that it is still possible to attain good estimation precision and keep the computational complexity low. Our numerical experiments show that the proposed algorithms outperform existing approaches that either leverage polynomial interpolation or are based on a conversion to a frequency-estimation problem followed by a super-resolution algorithm. The algorithms studied here provide various tradeoffs between computational complexity, estimation precision, and necessary sampling rate. The work shows that compressive sensing for the class of sparse translation-invariant signals allows for a decrease in sampling rate and that the use of polar interpolation increases the estimation precision.
△ Less
Submitted 6 January, 2015; v1 submitted 15 May, 2013;
originally announced May 2013.
-
Spectral Compressive Sensing with Polar Interpolation
Authors:
Karsten Fyhn,
Hamid Dadkhahi,
Marco F. Duarte
Abstract:
Existing approaches to compressive sensing of frequency-sparse signals focuses on signal recovery rather than spectral estimation. Furthermore, the recovery performance is limited by the coherence of the required sparsity dictionaries and by the discretization of the frequency parameter space. In this paper, we introduce a greedy recovery algorithm that leverages a band-exclusion function and a po…
▽ More
Existing approaches to compressive sensing of frequency-sparse signals focuses on signal recovery rather than spectral estimation. Furthermore, the recovery performance is limited by the coherence of the required sparsity dictionaries and by the discretization of the frequency parameter space. In this paper, we introduce a greedy recovery algorithm that leverages a band-exclusion function and a polar interpolation function to address these two issues in spectral compressive sensing. Our algorithm is geared towards line spectral estimation from compressive measurements and outperforms most existing approaches in fidelity and tolerance to noise.
△ Less
Submitted 21 May, 2013; v1 submitted 12 March, 2013;
originally announced March 2013.
-
Compressive Sensing for Spread Spectrum Receivers
Authors:
Karsten Fyhn,
Tobias Lindstrøm Jensen,
Torben Larsen,
Søren Holdt Jensen
Abstract:
With the advent of ubiquitous computing there are two design parameters of wireless communication devices that become very important power: efficiency and production cost. Compressive sensing enables the receiver in such devices to sample below the Shannon-Nyquist sampling rate, which may lead to a decrease in the two design parameters. This paper investigates the use of Compressive Sensing (CS) i…
▽ More
With the advent of ubiquitous computing there are two design parameters of wireless communication devices that become very important power: efficiency and production cost. Compressive sensing enables the receiver in such devices to sample below the Shannon-Nyquist sampling rate, which may lead to a decrease in the two design parameters. This paper investigates the use of Compressive Sensing (CS) in a general Code Division Multiple Access (CDMA) receiver. We show that when using spread spectrum codes in the signal domain, the CS measurement matrix may be simplified. This measurement scheme, named Compressive Spread Spectrum (CSS), allows for a simple, effective receiver design. Furthermore, we numerically evaluate the proposed receiver in terms of bit error rate under different signal to noise ratio conditions and compare it with other receiver structures. These numerical experiments show that though the bit error rate performance is degraded by the subsampling in the CS-enabled receivers, this may be remedied by including quantization in the receiver model. We also study the computational complexity of the proposed receiver design under different sparsity and measurement ratios. Our work shows that it is possible to subsample a CDMA signal using CSS and that in one example the CSS receiver outperforms the classical receiver.
△ Less
Submitted 27 February, 2013;
originally announced February 2013.
-
Demodulating Subsampled Direct Sequence Spread Spectrum Signals using Compressive Signal Processing
Authors:
Karsten Fyhn,
Thomas Arildsen,
Torben Larsen,
Søren Holdt Jensen
Abstract:
We show that to lower the sampling rate in a spread spectrum communication system using Direct Sequence Spread Spectrum (DSSS), compressive signal processing can be applied to demodulate the received signal. This may lead to a decrease in the power consumption or the manufacturing price of wireless receivers using spread spectrum technology. The main novelty of this paper is the discovery that in…
▽ More
We show that to lower the sampling rate in a spread spectrum communication system using Direct Sequence Spread Spectrum (DSSS), compressive signal processing can be applied to demodulate the received signal. This may lead to a decrease in the power consumption or the manufacturing price of wireless receivers using spread spectrum technology. The main novelty of this paper is the discovery that in spread spectrum systems it is possible to apply compressive sensing with a much simpler hardware architecture than in other systems, making the implementation both simpler and more energy efficient. Our theoretical work is exemplified with a numerical experiment using the IEEE 802.15.4 standard's 2.4 GHz band specification. The numerical results support our theoretical findings and indicate that compressive sensing may be used successfully in spread spectrum communication systems. The results obtained here may also be applicable in other spread spectrum technologies, such as Code Division Multiple Access (CDMA) systems.
△ Less
Submitted 10 October, 2012; v1 submitted 24 October, 2011;
originally announced October 2011.
-
Fast and Power Efficient Sensor Arbitration: Physical Layer Collision Recovery of Passive RFID Tags
Authors:
Karsten Fyhn,
Rasmus M. Jacobsen,
Petar Popovski,
Anna Scaglione,
Torben Larsen
Abstract:
This work concerns physical layer collision recovery for cheap sensors with allowed variations in frequency and delay of their communications. The work is presented as a generic, communication theoretic framework and demonstrated using UHF RFID tag technology. Previous work in this area has not provided recovery for more than two tags, which is shown to be possible in this work. Also presented is…
▽ More
This work concerns physical layer collision recovery for cheap sensors with allowed variations in frequency and delay of their communications. The work is presented as a generic, communication theoretic framework and demonstrated using UHF RFID tag technology. Previous work in this area has not provided recovery for more than two tags, which is shown to be possible in this work. Also presented is a novel mathematical model of the tag signal, incorporating the allowed variations in frequency and delay. The main motivation is seen in the observation that random variations in frequency and delay make the collided signals of different tags separable. The collision recovery is done by estimating the sensor specific variation in frequency and delay and using these estimates in a successive interference cancellation algorithm and a maximum likelihood sequence decoder, to iteratively reconstruct a sensor signal and remove it from the received signal. Numerical simulations show that the estimates and proposed algorithm are effective in recovering collisions. The proposed algorithm is then incorporated into a numerical simulation of the Qprotocol for UHF RFID tags and is shown to be effective in providing fast and power efficient sensor arbitration.
△ Less
Submitted 21 December, 2010; v1 submitted 16 December, 2010;
originally announced December 2010.