-
Neuromorphic Liquid Marbles With Aqueous Carbon Nanotube Cores
Authors:
Richard Mayne,
Thomas C. Draper,
Neil Phillips,
James G. H. Whiting,
Roshan Weerasekera,
Claire Fullarton,
Ben P. J. de Lacy Costello,
Andrew Adamatzky
Abstract:
Neuromorphic computing devices attempt to emulate features of biological nervous systems through mimicking the properties of synapses, towards implementing the emergent properties of their counterparts, such as learning. Inspired by recent advances in the utilisation of liquid marbles (microlitre quantities of fluid coated in hydrophobic powder) for the creation of unconventional computing devices…
▽ More
Neuromorphic computing devices attempt to emulate features of biological nervous systems through mimicking the properties of synapses, towards implementing the emergent properties of their counterparts, such as learning. Inspired by recent advances in the utilisation of liquid marbles (microlitre quantities of fluid coated in hydrophobic powder) for the creation of unconventional computing devices, we describe the development of liquid marbles with neuromorphic properties through the use of copper coatings and 1.0 mg/ml carbon nanotube-containing fluid cores. Experimentation was performed through sandwiching the marbles between two cup-style electrodes and stimulating them with repeated DC pulses at 3.0 V. Our results demonstrate that `entrainment' of a carbon nanotube filled-copper liquid marble via periodic pulses can cause their electrical resistance to rapidly switch between high to low resistance profiles, upon inverting the polarity of stimulation: the reduction in resistance between high and low profiles was approximately 88\% after two rounds of entrainment. This effect was found to be reversible through reversion to the original stimulus polarity and was strengthened by repeated experimentation, as evidenced by a mean reduction in time to switching onset of 43\%. These effects were not replicated in nanotube solutions not bound inside liquid marbles. Our electrical characterisation also reveals that nanotube-filled liquid marbles exhibit pinched loop hysteresis IV profiles consistent with the description of memristors. We conclude by discussing the applications of this technology to the development of unconventional computing devices and the study of emergent characteristics in biological neural tissue.
△ Less
Submitted 19 June, 2019;
originally announced June 2019.
-
Belousov-Zhabotinsky liquid marbles in robot control
Authors:
Michail-Antisthenis Tsompanas,
Claire Fullarton,
Andrew Adamatzky
Abstract:
We show how to control the movement of a wheeled robot using on-board liquid marbles made of Belousov-Zhabotinsky solution droplets coated with polyethylene powder. Two stainless steel, iridium coated electrodes were inserted in a marble and the electrical potential recorded was used to control the robot's motor. We stimulated the marble with a laser beam. It responded to the stimulation by pronou…
▽ More
We show how to control the movement of a wheeled robot using on-board liquid marbles made of Belousov-Zhabotinsky solution droplets coated with polyethylene powder. Two stainless steel, iridium coated electrodes were inserted in a marble and the electrical potential recorded was used to control the robot's motor. We stimulated the marble with a laser beam. It responded to the stimulation by pronounced changes in the electrical potential output. The electrical output was detected by robot. The robot was changing its trajectory in response to the stimulation. The results open new horizons for applications for oscillatory chemical reactions in robotics.
△ Less
Submitted 25 March, 2019;
originally announced April 2019.
-
Thermal switch of oscillation frequency in Belousov-Zhabotinsky liquid marbles
Authors:
Andrew Adamatzky,
Claire Fullarton,
Neil Phillips,
Ben De Lacy Costello,
Thomas C. Draper
Abstract:
External control of oscillation dynamics in the Belousov-Zhabotinsky reaction is important for many applications including encoding computing schemes. When considering the BZ reaction there are limited studies dealing with thermal cycling, particularly cooling, for external control. Recently, liquid marbles (LMs) have been demonstrated as a means of confining the Belousov-Zhabotinsky reaction in a…
▽ More
External control of oscillation dynamics in the Belousov-Zhabotinsky reaction is important for many applications including encoding computing schemes. When considering the BZ reaction there are limited studies dealing with thermal cycling, particularly cooling, for external control. Recently, liquid marbles (LMs) have been demonstrated as a means of confining the Belousov-Zhabotinsky reaction in a system containing a solid-liquid interface. BZ LMs were prepared by rolling 50 μl droplets in polyethylene (PE) powder. Oscillations of electrical potential differences within the marble were recorded by inserting a pair of electrodes through the LM powder coating into the BZ solution core. Electrical potential differences of up to 100mV were observed with an average period of oscillation ca. 44 s. BZ LMs were subsequently frozen to -1oC to observe changes in the frequency of electrical potential oscillations. The frequency of oscillations reduced upon freezing to 11mHz cf. 23mHz at ambient temperature. The oscillation frequency of the frozen BZ LM returned to 23mHz upon warming to ambient temperature. Several cycles of frequency fluctuations were able to be achieved.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
Belousov-Zhabotinsky reaction in liquid marbles
Authors:
Claire Fullarton,
Thomas C. Draper,
Neil Phillips,
Ben P. J. de Lacy Costello,
Andrew Adamatzky
Abstract:
This paper reports on a new method of encapsulating BZ solution droplets in a powder coating of either polyethylene (PE) or polytetrafluoroethylene (PTFE), to produce BZ liquid marbles (LMs). The BZ LMs have solid--liquid interfaces in contrast to the previously reported BZ encapsulation systems used to study pattern formations and wave transfers, such as BZ emulsions and BZ vesicles. All these sy…
▽ More
This paper reports on a new method of encapsulating BZ solution droplets in a powder coating of either polyethylene (PE) or polytetrafluoroethylene (PTFE), to produce BZ liquid marbles (LMs). The BZ LMs have solid--liquid interfaces in contrast to the previously reported BZ encapsulation systems used to study pattern formations and wave transfers, such as BZ emulsions and BZ vesicles. All these systems are important to study as they can be seen as analogues for information transfer in excitable systems in nature. Due to the powder coating of the LMs, LMs do not wet the underlying substrate, making the LMs mobile, enabling them to be easily arranged in arrays. The preparation of complex LMs, containing an acidic oscillating solution, proves the resilience of LMs and their application in transporting a wide range of chemical cargoes and in playing a mediating role in chemical reactions. PTFE-coated LMs were harder to prepare and not as robust as PE-coated LMs, therefore oscillation studies of BZ LMs positioned in arrays only focused on PE-coated LMs. Sporadic transfer of excitation waves was observed between LMs placed in close proximity to each other in ordered and disordered arrays, suggesting the transfer of liquid species possibly arises from contact between imperfectly coated areas at the LM--LM interface or capillary action, where solution is actively transported to the marble surface through the coating. Propagation pathways of the excitation waves in both the disordered and ordered arrays of BZ LMs are reported. These results lay the foundations for future studies on information transmission and processing arrays of BZ LMs, in addition to observing BZ wave propagation in a LM and the effect of other physical stimuli such as heat, light and chemical environments on the dynamics of excitation in arrays of BZ Lms.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Liquid Marble Interaction Gate for Collision-Based Computing
Authors:
Thomas C. Draper,
Claire Fullarton,
Neil Phillips,
Ben P. J. De Lacy Costello,
Andrew Adamatzky
Abstract:
Liquid marbles are microlitre droplets of liquid, encapsulated by self-organised hydrophobic particles at the liquid/air interface. They offer an efficient approach for manipulating liquid droplets and compartmentalising reactions in droplets. Digital fluidic devices employing liquid marbles might benefit from having embedded computing circuits without electronics and moving mechanical parts (apar…
▽ More
Liquid marbles are microlitre droplets of liquid, encapsulated by self-organised hydrophobic particles at the liquid/air interface. They offer an efficient approach for manipulating liquid droplets and compartmentalising reactions in droplets. Digital fluidic devices employing liquid marbles might benefit from having embedded computing circuits without electronics and moving mechanical parts (apart from the marbles). We present an experimental implementation of a collision gate with liquid marbles. Mechanics of the gate follows principles of Margolus' soft-sphere collision gate. Boolean values of the inputs are given by the absence (FALSE) or presence (TRUE) of a liquid marble. There are three outputs: two outputs are trajectories of undisturbed marbles (they only report TRUE when just one marble is present at one of the inputs), one output is represented by trajectories of colliding marbles (when two marbles collide they lose their horizontal momentum and fall), this output reports TRUE only when two marbles are present at inputs. Thus the gate implements AND and AND-NOT logical functions. We speculate that by merging trajectories representing AND-NOT output into a single channel one can produce a one-bit half-adder. Potential design of a one-bit full-adder is discussed, and the synthesis of both a pure nickel metal and hybrid nickel/polymer liquid marble is reported.
△ Less
Submitted 16 August, 2017;
originally announced August 2017.
