-
CSI4Free: GAN-Augmented mmWave CSI for Improved Pose Classification
Authors:
Nabeel Nisar Bhat,
Rafael Berkvens,
Jeroen Famaey
Abstract:
In recent years, Joint Communication and Sensing (JC&S), has demonstrated significant success, particularly in utilizing sub-6 GHz frequencies with commercial-off-the-shelf (COTS) Wi-Fi devices for applications such as localization, gesture recognition, and pose classification. Deep learning and the existence of large public datasets has been pivotal in achieving such results. However, at mmWave f…
▽ More
In recent years, Joint Communication and Sensing (JC&S), has demonstrated significant success, particularly in utilizing sub-6 GHz frequencies with commercial-off-the-shelf (COTS) Wi-Fi devices for applications such as localization, gesture recognition, and pose classification. Deep learning and the existence of large public datasets has been pivotal in achieving such results. However, at mmWave frequencies (30-300 GHz), which has shown potential for more accurate sensing performance, there is a noticeable lack of research in the domain of COTS Wi-Fi sensing. Challenges such as limited research hardware, the absence of large datasets, limited functionality in COTS hardware, and the complexities of data collection present obstacles to a comprehensive exploration of this field. In this work, we aim to address these challenges by develo** a method that can generate synthetic mmWave channel state information (CSI) samples. In particular, we use a generative adversarial network (GAN) on an existing dataset, to generate 30,000 additional CSI samples. The augmented samples exhibit a remarkable degree of consistency with the original data, as indicated by the notably high GAN-train and GAN-test scores. Furthermore, we integrate the augmented samples in training a pose classification model. We observe that the augmented samples complement the real data and improve the generalization of the classification model.
△ Less
Submitted 28 June, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
Multi-Gigabit Interactive Extended Reality over Millimeter-Wave: An End-to-End System Approach
Authors:
Jakob Struye,
Filip Lemic,
Jeroen Famaey
Abstract:
Achieving high-quality wireless interactive Extended Reality (XR) will require multi-gigabit throughput at extremely low latency. The Millimeter-Wave (mmWave) frequency bands, between 24 and 300GHz, can achieve such extreme performance. However, maintaining a consistently high Quality of Experience with highly mobile users is challenging, as mmWave communications are inherently directional. In thi…
▽ More
Achieving high-quality wireless interactive Extended Reality (XR) will require multi-gigabit throughput at extremely low latency. The Millimeter-Wave (mmWave) frequency bands, between 24 and 300GHz, can achieve such extreme performance. However, maintaining a consistently high Quality of Experience with highly mobile users is challenging, as mmWave communications are inherently directional. In this work, we present and evaluate an end-to-end approach to such a mmWave-based mobile XR system. We perform a highly realistic simulation of the system, incorporating accurate XR data traffic, detailed mmWave propagation models and actual user motion. We evaluate the impact of the beamforming strategy and frequency on the overall performance. In addition, we provide the first system-level evaluation of the CoVRage algorithm, a proactive and spatially aware user-side beamforming approach designed specifically for highly mobile XR environments.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
Low-latency Symbol-Synchronous Communication for Multi-hop Sensor Networks
Authors:
Xinlei Liu,
Andrey Belogaev,
Jonathan Oostvogels,
Bingwu Fang,
Danny Hughes,
Maarten Weyn,
Jeroen Famaey
Abstract:
Wireless sensor networks (WSNs) have received great interest due to their scalability, energy efficiency, and low-cost deployment. By utilizing multi-hop communication, WSNs can cover a wide area using low transmission power without the need for any communication infrastructure. Traditionally, WSNs rely on store-and-forward routing protocols and Time Division Multiple Access (TDMA)-based schedules…
▽ More
Wireless sensor networks (WSNs) have received great interest due to their scalability, energy efficiency, and low-cost deployment. By utilizing multi-hop communication, WSNs can cover a wide area using low transmission power without the need for any communication infrastructure. Traditionally, WSNs rely on store-and-forward routing protocols and Time Division Multiple Access (TDMA)-based schedules that avoid interference between different wireless nodes. However, emerging challenging scenarios, such as the industrial Internet of Things (IoT) and robotic swarms, impose strict latency and reliability requirements, which traditional approaches cannot fulfill. In this paper, we propose a novel symbol-synchronous transmission design that provides reliable low-latency communication with a reasonable data rate on classical sub-6GHz RF frequency bands (e.g., the 2.4GHz ISM band). Instead of avoiding overlap** transmissions, the proposed scheme benefits from concurrent transmissions. Using simulation in MATLAB, we prove that the proposed design allows achieving a wire-like delay of 5ms for a 512-bit packet over multiple hops with only a 0.3% latency increase per extra hop and a low bit error rate (BER) of 0.04%. Compared to similar state-of-the-art approaches it can achieve a significantly higher data rate of 100kbps, which is expected to increase further with future improvements of the system.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Dedicated Restricted Target Wake Time for Real-Time Applications in Wi-Fi 7
Authors:
Andrey Belogaev,
Xiaoman Shen,
Chun Pan,
Xingfeng Jiang,
Chris Blondia,
Jeroen Famaey
Abstract:
Real-time applications (RTA) tend to play a crucial role in people's everyday life. Such applications are among the key use cases for the next generations of wireless technologies. RTA applications are characterized by strict guaranteed delay requirements (in the order of a few milliseconds). One of the pillars of enabling RTA in next-generation Wi-Fi standards is Restricted Target Wake Time (R-TW…
▽ More
Real-time applications (RTA) tend to play a crucial role in people's everyday life. Such applications are among the key use cases for the next generations of wireless technologies. RTA applications are characterized by strict guaranteed delay requirements (in the order of a few milliseconds). One of the pillars of enabling RTA in next-generation Wi-Fi standards is Restricted Target Wake Time (R-TWT), which provides Wi-Fi stations exclusive channel access within negotiated service periods (SPs). If each RTA data flow uses dedicated SPs for data transmission, they are completely isolated from each other and do not experience any contention. To ensure the satisfaction of RTA QoS requirements while minimizing the channel airtime consumption, it is important to properly select the R-TWT parameters, namely the duration of SPs and the period between SPs. In this paper, we develop a mathematical model that estimates the delay probability distribution and packet loss probability for a given set of network, traffic and R-TWT parameters. Using this model, the access point can select the optimal R-TWT parameters for the given QoS requirements. The high accuracy of the model is proven by means of simulation.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Battery-Less LoRaWAN Communications using Energy Harvesting: Modeling and Characterization
Authors:
Carmen Delgado,
José María Sanz,
Chris Blondia,
Jeroen Famaey
Abstract:
Billions of IoT devices are deployed worldwide and batteries are their main power source. However, these batteries are bulky, short-lived and full of hazardous chemicals that damage our environment. Relying on batteries is not a sustainable solution for the future IoT. As an alternative, battery-less devices run on long-lived capacitors charged using energy harvesters. The small energy storage cap…
▽ More
Billions of IoT devices are deployed worldwide and batteries are their main power source. However, these batteries are bulky, short-lived and full of hazardous chemicals that damage our environment. Relying on batteries is not a sustainable solution for the future IoT. As an alternative, battery-less devices run on long-lived capacitors charged using energy harvesters. The small energy storage capacity of capacitors results in an intermittent on-off behaviour. LoRaWAN is a popular Low Power Wide Area Network technology used in many IoT devices and can be used in these new scenarios. In this work, we present a Markov model to characterize the performance of battery-less LoRaWAN devices for uplink and downlink transmissions and we evaluate their performance in terms of the parameters that define the model (i.e., device configuration, application behaviour and environmental conditions). Results show that LoRaWAN battery-less communications are feasible if choosing the proper configuration (i.e., capacitor size, turn-on voltage threshold) for different application behaviour (i.e., transmission interval, UL/DL packet sizes) and environmental conditions (i.e., energy harvesting rate). Since downlink in the second reception window highly affects the performance, only small DL packet sizes should be considered for these devices. Besides, a 47 mF capacitor can support 1 Byte $SF7$ transmissions every 60 s at an energy harvesting rate of 1 mW. However, if no DL is expected, a 4.7 mF capacitor could support 1 Byte $SF7$ transmissions every 9~s.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
On the Feasibility of Battery-Less LoRaWAN Communications using Energy Harvesting
Authors:
Carmen Delgado,
Jos é María Sanz,
Jeroen Famaey
Abstract:
From the outset, batteries have been the main power source for the Internet of Things (IoT). However, replacing and disposing of billions of dead batteries per year is costly in terms of maintenance and ecologically irresponsible. Since batteries are one of the greatest threats to a sustainable IoT, battery-less devices are the solution to this problem. These devices run on long-lived capacitors c…
▽ More
From the outset, batteries have been the main power source for the Internet of Things (IoT). However, replacing and disposing of billions of dead batteries per year is costly in terms of maintenance and ecologically irresponsible. Since batteries are one of the greatest threats to a sustainable IoT, battery-less devices are the solution to this problem. These devices run on long-lived capacitors charged using various forms of energy harvesting, which results in intermittent on-off device behaviour. In this work, we model this intermittent battery-less behaviour for LoRaWAN devices. This model allows us to characterize the performance with the aim to determine under which conditions a LoRaWAN device can work without batteries, and how its parameters should be configured. Results show that the reliability directly depends on device configurations (i.e., capacitor size, turn-on voltage threshold), application behaviour (i.e., transmission interval, packet size) and environmental conditions (i.e., energy harvesting rate).
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Optimal energy-aware task scheduling for batteryless IoT devices
Authors:
Carmen Delgado,
Jeroen Famaey
Abstract:
Today's IoT devices rely on batteries, which offer stable energy storage but contain harmful chemicals. Having billions of IoT devices powered by batteries is not sustainable for the future. As an alternative, batteryless devices run on long-lived capacitors charged using energy harvesters. The small energy storage capacity of capacitors results in intermittent on-off behaviour. Traditional comput…
▽ More
Today's IoT devices rely on batteries, which offer stable energy storage but contain harmful chemicals. Having billions of IoT devices powered by batteries is not sustainable for the future. As an alternative, batteryless devices run on long-lived capacitors charged using energy harvesters. The small energy storage capacity of capacitors results in intermittent on-off behaviour. Traditional computing schedulers can not handle this intermittency, and in this paper we propose a first step towards an energy-aware task scheduler for constrained batteryless devices. We present a new energy-aware task scheduling algorithm that is able to optimally schedule application tasks to avoid power failures, and that will allow us to provide insights on the optimal look-ahead time for energy prediction. Our insights can be used as a basis for practical energy-aware scheduling and energy availability prediction algorithms. We formulate the scheduling problem as a Mixed Integer Linear Program. We evaluate its performance improvement when comparing it with state-of-the-art schedulers for batteryless IoT devices. Our results show that making the task scheduler energy aware avoids power failures and allows more tasks to successfully execute. Moreover, we conclude that a relatively short look-ahead energy prediction time of 8 future task executions is enough to achieve optimality.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
On the Energy Efficiency of THz-NOMA enhanced UAV Cooperative Network with SWIPT
Authors:
Jalal Jalali,
Ata Khalili,
Hina Tabassum,
Rafael Berkvens,
Jeroen Famaey,
Walid Saad
Abstract:
This paper considers the energy efficiency (EE) maximization of a simultaneous wireless information and power transfer (SWIPT)-assisted unmanned aerial vehicles (UAV) cooperative network operating at TeraHertz (THz) frequencies. The source performs SWIPT enabling the UAV to receive both power and information while also transmitting the information to a designated destination node. Subsequently, th…
▽ More
This paper considers the energy efficiency (EE) maximization of a simultaneous wireless information and power transfer (SWIPT)-assisted unmanned aerial vehicles (UAV) cooperative network operating at TeraHertz (THz) frequencies. The source performs SWIPT enabling the UAV to receive both power and information while also transmitting the information to a designated destination node. Subsequently, the UAV utilizes the harvested energy to relay the data to the intended destination node effectively. Specifically, we maximize EE by optimizing the non-orthogonal multiple access (NOMA) power allocation coefficients, SWIPT power splitting (PS) ratio, and UAV trajectory. The main problem is broken down into a two-stage optimization problem and solved using an alternating optimization approach. In the first stage, optimization of the PS ratio and trajectory is performed by employing successive convex approximation using a lower bound on the exponential factor in the THz channel model. In the second phase, the NOMA power coefficients are optimized using a quadratic transform approach. Numerical results demonstrate the effectiveness of our proposed resource allocation algorithm compared to the baselines where there is no trajectory optimization or no NOMA power or PS optimization.
△ Less
Submitted 6 November, 2023; v1 submitted 24 September, 2023;
originally announced September 2023.
-
Gesture Recognition with mmWave Wi-Fi Access Points: Lessons Learned
Authors:
Nabeel Nisar Bhat,
Rafael Berkvens,
Jeroen Famaey
Abstract:
In recent years, channel state information (CSI) at sub-6 GHz has been widely exploited for Wi-Fi sensing, particularly for activity and gesture recognition. In this work, we instead explore mmWave (60 GHz) Wi-Fi signals for gesture recognition/pose estimation. Our focus is on the mmWave Wi-Fi signals so that they can be used not only for high data rate communication but also for improved sensing…
▽ More
In recent years, channel state information (CSI) at sub-6 GHz has been widely exploited for Wi-Fi sensing, particularly for activity and gesture recognition. In this work, we instead explore mmWave (60 GHz) Wi-Fi signals for gesture recognition/pose estimation. Our focus is on the mmWave Wi-Fi signals so that they can be used not only for high data rate communication but also for improved sensing e.g., for extended reality (XR) applications. For this reason, we extract spatial beam signal-to-noise ratios (SNRs) from the periodic beam training employed by IEEE 802.11ad devices. We consider a set of 10 gestures/poses motivated by XR applications. We conduct experiments in two environments and with three people.As a comparison, we also collect CSI from IEEE 802.11ac devices. To extract features from the CSI and the beam SNR, we leverage a deep neural network (DNN). The DNN classifier achieves promising results on the beam SNR task with state-of-the-art 96.7% accuracy in a single environment, even with a limited dataset. We also investigate the robustness of the beam SNR against CSI across different environments. Our experiments reveal that features from the CSI generalize without additional re-training, while those from beam SNRs do not. Therefore, re-training is required in the latter case.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Predictive Context-Awareness for Full-Immersive Multiuser Virtual Reality with Redirected Walking
Authors:
Filip Lemic,
Jakob Struye,
Thomas Van Onsem,
Jeroen Famaey,
Xavier Costa Perez
Abstract:
The advancement of Virtual Reality (VR) technology is focused on improving its immersiveness, supporting multiuser Virtual Experiences (VEs), and enabling users to move freely within their VEs while remaining confined to specialized VR setups through Redirected Walking (RDW). To meet their extreme data-rate and latency requirements, future VR systems will require supporting wireless networking inf…
▽ More
The advancement of Virtual Reality (VR) technology is focused on improving its immersiveness, supporting multiuser Virtual Experiences (VEs), and enabling users to move freely within their VEs while remaining confined to specialized VR setups through Redirected Walking (RDW). To meet their extreme data-rate and latency requirements, future VR systems will require supporting wireless networking infrastructures operating in millimeter Wave (mmWave) frequencies that leverage highly directional communication in both transmission and reception through beamforming and beamsteering. We propose the use of predictive context-awareness to optimize transmitter and receiver-side beamforming and beamsteering. By predicting users' short-term lateral movements in multiuser VR setups with Redirected Walking (RDW), transmitter-side beamforming and beamsteering can be optimized through Line-of-Sight (LoS) "tracking" in the users' directions. At the same time, predictions of short-term orientational movements can be utilized for receiver-side beamforming for coverage flexibility enhancements. We target two open problems in predicting these two context information instances: i) predicting lateral movements in multiuser VR settings with RDW, and ii) generating synthetic head rotation datasets for training orientational movements predictors. Our experimental results demonstrate that Long Short-Term Memory (LSTM) networks feature promising accuracy in predicting lateral movements, and context-awareness stemming from VEs further enhances this accuracy. Additionally, we show that a TimeGAN-based approach for orientational data generation can create synthetic samples that closely match experimentally obtained ones.
△ Less
Submitted 29 May, 2023; v1 submitted 31 March, 2023;
originally announced March 2023.
-
Toward Standardized Performance Evaluation of Flow-guided Nanoscale Localization
Authors:
Arnau Brosa López,
Filip Lemic,
Jakob Struye,
Jorge Torres Gómez,
Esteban Municio,
Carmen Delgado,
Gerard Calvo Bartra,
Falko Dressler,
Eduard Alarcón,
Jeroen Famaey,
Sergi Abadal,
Xavier Costa Pérez
Abstract:
Nanoscale devices with Terahertz (THz) communication capabilities are envisioned to be deployed within human bloodstreams. Such devices will enable fine-grained sensing-based applications for detecting early indications (i.e., biomarkers) of various health conditions, as well as actuation-based ones such as targeted drug delivery. Associating the locations of such events with the events themselves…
▽ More
Nanoscale devices with Terahertz (THz) communication capabilities are envisioned to be deployed within human bloodstreams. Such devices will enable fine-grained sensing-based applications for detecting early indications (i.e., biomarkers) of various health conditions, as well as actuation-based ones such as targeted drug delivery. Associating the locations of such events with the events themselves would provide an additional utility for precision diagnostics and treatment. This vision yielded a new class of in-body localization coined under the term "flow-guided nanoscale localization". Such localization can be piggybacked on THz communication for detecting body regions in which biological events were observed based on the duration of one circulation of a nanodevice in the bloodstream. From a decades-long research on objective benchmarking of "traditional" indoor localization, as well as its eventual standardization (e.g., ISO/IEC 18305:2016), we know that in early stages the reported performance results were often incomplete (e.g., targeting a subset of relevant performance metrics), carrying out benchmarking experiments in different evaluation environments and scenarios, and utilizing inconsistent performance indicators. To avoid such a "lock-in" in flow-guided localization, in this paper we propose a workflow for standardized performance evaluation of such localization. The workflow is implemented in the form of an open-source simulation framework that is able to jointly account for the mobility of the nanodevices, in-body THz communication between with on-body anchors, and energy-related and other technological constraints (e.g., pulse-based modulation) at the nanodevice level. Accounting for these constraints, the framework is able to generate the raw data that can be streamlined into different flow-guided localization solutions for generating standardized performance benchmarks.
△ Less
Submitted 7 March, 2024; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Energy-Aware Packet Schedulers for Battery-Less LoRaWAN Nodes
Authors:
Martina Capuzzo,
Carmen Delgado,
Jeroen Famaey,
Andrea Zanella
Abstract:
The Internet of Things (IoT) enables a wide variety of applications where large sensor networks are deployed in remote areas without power grid access. Thus, the sensor nodes often run on batteries, whose replacement and disposal represent important economical and environmental costs. To realize more sustainable IoT solutions, it is therefore desirable to adopt battery-less energy-neutral devices…
▽ More
The Internet of Things (IoT) enables a wide variety of applications where large sensor networks are deployed in remote areas without power grid access. Thus, the sensor nodes often run on batteries, whose replacement and disposal represent important economical and environmental costs. To realize more sustainable IoT solutions, it is therefore desirable to adopt battery-less energy-neutral devices that can harvest energy from renewable sources and store it in super-capacitors, whose environmental impact is much lower than that of batteries. To achieve the energetic self-sustainability of such nodes, however, communication and computational processes must be optimized to make the best use of the scarce and volatile energy available. In this work, we propose different energy-aware packet scheduling algorithms for battery-less LoRaWAN nodes, and compare them in various simulated scenarios, using actual energy-harvesting measurements taken from a testbed. We show that an energy-aware design can significantly increase the number of transmitted packets, also lowering the mean time between packet transmissions, though (as predictable) the gain strongly depends on the harvesting capabilities of the nodes.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
CoVRage: Millimeter-Wave Beamforming for Mobile Interactive Virtual Reality
Authors:
Jakob Struye,
Filip Lemic,
Jeroen Famaey
Abstract:
Contemporary Virtual Reality (VR) setups often include an external source delivering content to a Head-Mounted Display (HMD). "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. The massive bandwidth of higher frequencies, such as the millimeter-wave (mmWave) band, can meet thes…
▽ More
Contemporary Virtual Reality (VR) setups often include an external source delivering content to a Head-Mounted Display (HMD). "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. The massive bandwidth of higher frequencies, such as the millimeter-wave (mmWave) band, can meet these requirements. Due to high attenuation and path loss in the mmWave frequencies, beamforming is essential. In wireless VR, where the antenna is integrated into the HMD, any head rotation also changes the antenna's orientation. As such, beamforming must adapt, in real-time, to the user's head rotations. An HMD's built-in sensors providing accurate orientation estimates may facilitate such rapid beamforming. In this work, we present coVRage, a receive-side beamforming solution tailored for VR HMDs. Using built-in orientation prediction present on modern HMDs, the algorithm estimates how the Angle of Arrival (AoA) at the HMD will change in the near future, and covers this AoA trajectory with a dynamically shaped oblong beam, synthesized using sub-arrays. We show that this solution can cover these trajectories with consistently high gain, even in light of temporally or spatially inaccurate orientational data.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Short-Term Trajectory Prediction for Full-Immersive Multiuser Virtual Reality with Redirected Walking
Authors:
Filip Lemic,
Jakob Struye,
Jeroen Famaey
Abstract:
Full-immersive multiuser Virtual Reality (VR) envisions supporting unconstrained mobility of the users in the virtual worlds, while at the same time constraining their physical movements inside VR setups through redirected walking. For enabling delivery of high data rate video content in real-time, the supporting wireless networks will leverage highly directional communication links that will "tra…
▽ More
Full-immersive multiuser Virtual Reality (VR) envisions supporting unconstrained mobility of the users in the virtual worlds, while at the same time constraining their physical movements inside VR setups through redirected walking. For enabling delivery of high data rate video content in real-time, the supporting wireless networks will leverage highly directional communication links that will "track" the users for maintaining the Line-of-Sight (LoS) connectivity. Recurrent Neural Networks (RNNs) and in particular Long Short-Term Memory (LSTM) networks have historically presented themselves as a suitable candidate for near-term movement trajectory prediction for natural human mobility, and have also recently been shown as applicable in predicting VR users' mobility under the constraints of redirected walking. In this work, we extend these initial findings by showing that Gated Recurrent Unit (GRU) networks, another candidate from the RNN family, generally outperform the traditionally utilized LSTMs. Second, we show that context from a virtual world can enhance the accuracy of the prediction if used as an additional input feature in comparison to the more traditional utilization of solely the historical physical movements of the VR users. Finally, we show that the prediction system trained on a static number of coexisting VR users be scaled to a multi-user system without significant accuracy degradation.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
Intelligent Reflective Surface vs. Mobile Relay-supported NLoS Avoidance in Indoor mmWave Networks
Authors:
Maria Bustamante Madrid,
Jeroen Famaey,
Filip Lemic
Abstract:
The 6th generation of wireless communication (6G) is envisioned to give rise to various technologies for improving the end-to-end communication performance, where the communication is envisioned to utilize wireless signals in the millimeter wave (mmWave) frequencies and above. Among others, these technologies comprise Intelligent Reflective Surfaces (IRSs) and Mobile Relays (MRs), whose envisaged…
▽ More
The 6th generation of wireless communication (6G) is envisioned to give rise to various technologies for improving the end-to-end communication performance, where the communication is envisioned to utilize wireless signals in the millimeter wave (mmWave) frequencies and above. Among others, these technologies comprise Intelligent Reflective Surfaces (IRSs) and Mobile Relays (MRs), whose envisaged roles include mitigating the negative effects of Non-Line-of-Sight (NLoS) connectivity, in particular at mmWave and higher frequencies. The core idea behind these technologies is to use cooperative networking where the source sends a signal to a repeater, in this case the IRS or the MR, which is upon reception forwarded to the destination. When comparing the two technologies, it is important to realize that the IRSs are primarily envisioned to be static entities attached to various objects in the environment such as walls and furniture. In contrast, the MRs will feature a higher degree of freedom, as they will be able to position themselves seamlessly in the environment. Based on the above assumptions, we derive an approach for determining the optimal position of the IRS and MR in indoor environments, i.e., the one that maximizes the end-to-end link quality between the source and the destination. We follow by capturing the communication quality indicators for both IRS- and MR-supported NLoS avoidance in indoor mmWave communication in a number of scenarios. Our results show that, from the end-to-end link quality perspective, the MRs generally outperform the IRSs, suggesting their utilization potential for throughput-optimized NLoS avoidance scenarios.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Small UAVs-supported Autonomous Generation of Fine-grained 3D Indoor Radio Environmental Maps
Authors:
Ken Mendes,
Filip Lemic,
Jeroen Famaey
Abstract:
Radio Environmental Maps (REMs) are a powerful tool for enhancing the performance of various communication and networked agents. However, generating REMs is a laborious undertaking, especially in complex 3-Dimensional (3D) environments, such as indoors. To address this issue, we propose a system for autonomous generation of fine-grained REMs of indoor 3D spaces. In the system, multiple small indoo…
▽ More
Radio Environmental Maps (REMs) are a powerful tool for enhancing the performance of various communication and networked agents. However, generating REMs is a laborious undertaking, especially in complex 3-Dimensional (3D) environments, such as indoors. To address this issue, we propose a system for autonomous generation of fine-grained REMs of indoor 3D spaces. In the system, multiple small indoor Unmanned Aerial Vehicles (UAVs) are sequentially used for 3D sampling of signal quality indicators. The collected readings are streamlined to a Machine Learning (ML) system for its training and, once trained, the system is able to predict the signal quality at unknown 3D locations. The system enables automated and autonomous REM generation, and can be straightforwardly deployed in new environments. In addition, the system supports REM sampling without self-interference and is technology-agnostic, as long as the REM-sampling receivers features suitable sizes and weights to be carried by the UAVs. In the demonstration, we instantiate the system design using two UAVs and show its capability of visiting 72 waypoints and gathering thousands of Wi-Fi data samples. Our results also include an instantiation of the ML system for predicting the Received Signal Strength (RSS) of known Wi-Fi Access Points (APs) at locations not visited by the UAVs.
△ Less
Submitted 5 November, 2021;
originally announced November 2021.
-
Millimeter-Wave Beamforming with Continuous Coverage for Mobile Interactive Virtual Reality
Authors:
Jakob Struye,
Filip Lemic,
Jeroen Famaey
Abstract:
Contemporary Virtual Reality (VR) setups commonly consist of a Head-Mounted Display (HMD) tethered to a content-generating server. "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. Higher frequencies, such as the millimeter-wave (mmWave) band, can support these requirements. D…
▽ More
Contemporary Virtual Reality (VR) setups commonly consist of a Head-Mounted Display (HMD) tethered to a content-generating server. "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. Higher frequencies, such as the millimeter-wave (mmWave) band, can support these requirements. Due to high attenuation and path loss in the mmWave frequencies, beamforming is essential. For VR setups, beamforming must adapt in real-time to the user's head rotations, but can rely on the HMD's built-in sensors providing accurate orientation estimates. In this work, we present coVRage, a beamforming solution tailored for VR HMDs. Based on past and current head orientations, the HMD predicts how the Angle of Arrival (AoA) from the access point will change in the near future, and covers this AoA trajectory with a dynamically shaped beam, synthesized using sub-arrays. We show that this solution can cover such trajectories with consistently high gain, unlike regular single-beam solutions.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
An ns-3 implementation of a battery-less node for energy-harvesting Internet of Things
Authors:
Martina Capuzzo,
Carmen Delgado,
Jeroen Famaey,
Andrea Zanella
Abstract:
In the Internet of Things (IoT), thousands of devices can be deployed to acquire data from the environment and provide service to several applications in different fields. In many cases, it is desirable that devices are self-sustainable in terms of energy. Therefore,the research community is exploring the possibility of employing battery-less devices, where the energy is derived solely from extern…
▽ More
In the Internet of Things (IoT), thousands of devices can be deployed to acquire data from the environment and provide service to several applications in different fields. In many cases, it is desirable that devices are self-sustainable in terms of energy. Therefore,the research community is exploring the possibility of employing battery-less devices, where the energy is derived solely from external and/or environmental sources, such as solar panels. In this work, we propose an ns-3 model of a (super) capacitor, which can be used as the storage of the harvested energy in a battery-less IoT device, and add the support for the intermittent behavior of devices, turning off/on according to their energy level. To exemplify the use of the model, we apply it to a LoRaWAN node, and compare the simulation outcomes with results in the literature obtained with mathematical analysis, confirming the accuracy of the implementation. Then, we show the importance of analyzing the interaction between energy availability and communication performance, paving the way for more accurate and realistic simulations in the field. The implemented code is made available as open source.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Toward Location-aware In-body Terahertz Nanonetworks with Energy Harvesting
Authors:
Filip Lemic,
Sergi Abadal,
Aleksandar Stevanovic,
Eduard Alarcón,
Jeroen Famaey
Abstract:
Nanoscale wireless networks are expected to revolutionize a variety of domains, with significant advances conceivable in in-body healthcare. In healthcare, these nanonetworks will consist of energy-harvesting nanodevices passively flowing through the bloodstream, taking actions at certain locations, and communicating results to more powerful Body Area Network (BAN) nodes. Assuming such a setup and…
▽ More
Nanoscale wireless networks are expected to revolutionize a variety of domains, with significant advances conceivable in in-body healthcare. In healthcare, these nanonetworks will consist of energy-harvesting nanodevices passively flowing through the bloodstream, taking actions at certain locations, and communicating results to more powerful Body Area Network (BAN) nodes. Assuming such a setup and electromagnetic nanocommunication in the Terahertz (THz) frequencies, we propose a network architecture that can support fine-grained localization of the energy-harvesting in-body nanonodes, as well as their two-way communication with the outside world. The main novelties of our proposal lie in the introduction of location-aware and Wake-up Radio (WuR)-based wireless nanocommunication paradigms, as well as Software-Defined Metamaterials (SDMs), to THz-operating energy-harvesting in-body nanonetworks. We argue that, on a high level, the proposed architecture can handle (and actually benefits from) a large number of nanonodes, while simultaneously dealing with a short range of THz in-body propagation and highly constrained nanonodes.
△ Less
Submitted 5 May, 2021; v1 submitted 6 January, 2021;
originally announced January 2021.
-
Toward Localization in Terahertz-Operating Energy Harvesting Software-Defined Metamaterials: Context Analysis
Authors:
F. Lemic,
S. Abadal,
J. Famaey
Abstract:
Software-defined metamaterials (SDMs) represent a novel paradigm for real-time control of metamaterials. SDMs are envisioned to enable a variety of exciting applications in the domains such as smart textiles and sensing in challenging conditions. Many of these applications envisage deformations of the SDM structure (e.g., rolling, bending, stretching). This affects the relative position of the met…
▽ More
Software-defined metamaterials (SDMs) represent a novel paradigm for real-time control of metamaterials. SDMs are envisioned to enable a variety of exciting applications in the domains such as smart textiles and sensing in challenging conditions. Many of these applications envisage deformations of the SDM structure (e.g., rolling, bending, stretching). This affects the relative position of the metamaterial elements and requires their localization relative to each other. The question of how to perform such localization is, however, yet to spark in the community. We consider that the metamaterial elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. Moreover, we consider the elements to be energy constrained, with their sole powering option being to harvest environmental energy. For such a setup, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in localization. Finally, we provide the localization context for a number of relevant system parameters such as operational frequency, bandwidth, and harvesting rate.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Localization in Power-Constrained Terahertz-Operating Software-Defined Metamaterials
Authors:
Filip Lemic,
Sergi Abadal,
Chong Han,
Johann Marquez-Barja,
Eduard Alarcón,
Jeroen Famaey
Abstract:
Software-Defined Metamaterials (SDMs) show a strong potential for advancing the engineered control of electromagnetic waves. As such, they are envisioned to enable a variety of exciting applications, among others in the domains of smart textiles, high-resolution structural monitoring, and sensing in challenging environments. Many of the applications envisage deformations of the SDM structures, suc…
▽ More
Software-Defined Metamaterials (SDMs) show a strong potential for advancing the engineered control of electromagnetic waves. As such, they are envisioned to enable a variety of exciting applications, among others in the domains of smart textiles, high-resolution structural monitoring, and sensing in challenging environments. Many of the applications envisage deformations of the SDM structures, such as their bending, stretching or rolling, which implies that the locations of metamaterial elements will be changing relative to one another. In this paper, we argue that if the metamaterial elements would be accurately localizable, this location information could potentially be utilized for enabling novel SDM applications, as well as for optimizing the control of the elements themselves. To enable their localization, we assume that these elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. We consider the elements to be power-constrained, with their sole powering option being to harvest energy from different environmental sources. By means of simulation, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in the localization process. Finally, we qualitatively characterize the latency of the proposed localization service, as well as outline several challenges and future research directions.
△ Less
Submitted 28 June, 2021; v1 submitted 30 October, 2020;
originally announced November 2020.
-
Towards Ultra-Low-Latency mmWave Wi-Fi for Multi-User Interactive Virtual Reality
Authors:
Jakob Struye,
Filip Lemic,
Jeroen Famaey
Abstract:
The need for cables with high-fidelity Virtual Reality (VR) headsets remains a stumbling block on the path towards interactive multi-user VR. Due to strict latency constraints, designing fully wireless headsets is challenging, with the few commercially available solutions being expensive. These solutions use proprietary millimeter wave (mmWave) communications technologies, as extremely high freque…
▽ More
The need for cables with high-fidelity Virtual Reality (VR) headsets remains a stumbling block on the path towards interactive multi-user VR. Due to strict latency constraints, designing fully wireless headsets is challenging, with the few commercially available solutions being expensive. These solutions use proprietary millimeter wave (mmWave) communications technologies, as extremely high frequencies are needed to meet the throughput and latency requirements of VR applications. In this work, we investigate whether such a system could be built using specification-compliant IEEE 802.11ad hardware, which would significantly reduce the cost of wireless mmWave VR solutions. We present a theoretical framework to calculate attainable live VR video bitrates for different IEEE 802.11ad channel access methods, using 1 or more head-mounted displays connected to a single Access Point (AP). Using the ns-3 simulator, we validate our theoretical framework, and demonstrate that a properly configured IEEE 802.11ad AP can support at least 8 headsets receiving a 4K video stream for each eye, with transmission latency under 1 millisecond.
△ Less
Submitted 3 February, 2021; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Survey on Terahertz Nanocommunication and Networking: A Top-Down Perspective
Authors:
Filip Lemic,
Sergi Abadal,
Wouter Tavernier,
Pieter Stroobant,
Didier Colle,
Eduard Alarcón,
Johann Marquez-Barja,
Jeroen Famaey
Abstract:
Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, ele…
▽ More
Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, electromagnetic nanocommunication in the terahertz (THz) frequency band is particularly promising, mainly due to the breakthrough of novel materials such as graphene. For this reason, numerous research efforts are nowadays targeting THz band nanocommunication and consequently nanonetworking. As it is expected that these trends will continue in the future, we see it beneficial to summarize the current status in these research domains. In this survey, we therefore aim to provide an overview of the current THz nanocommunication and nanonetworking research. Specifically, we discuss the applications envisioned to be supported by nanonetworks operating in the THz band, together with the requirements such applications pose on the underlying nanonetworks. Subsequently, we provide an overview of the current contributions on the different layers of the protocol stack, as well as the available channel models and experimentation tools. As the final contribution, we identify a number of open research challenges and outline several potential future research directions.
△ Less
Submitted 5 February, 2021; v1 submitted 12 September, 2019;
originally announced September 2019.
