-
FENDL: A library for fusion research and applications
Authors:
G. Schnabel,
D. L. Aldama,
T. Bohm,
U. Fischer,
S. Kunieda,
A. Trkov,
C. Konno,
R. Capote,
A. J. Koning,
S. Breidokaite,
T. Eade,
M. Fabbri,
D. Flammini,
L. Isolan,
I. Kodeli,
M. Košťál,
S. Kwon,
D. Laghi,
D. Leichtle,
S. Nakayama,
M. Ohta,
L. W. Packer,
Y. Qiu,
S. Sato,
M. Sawan
, et al. (6 additional authors not shown)
Abstract:
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for i…
▽ More
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for incident neutron, proton, and deuteron cross sections including general purpose and activation files used for particle transport and nuclide inventory calculations.
We describe the history, selection of evaluations for the various sub-libraries (neutron, proton, deuteron) with the focus on transport and reactor dosimetry applications, the processing of the nuclear data for application codes, and the development of the TENDL-2017 library which is the currently recommended activation library for FENDL. We briefly describe the IAEA IRDFF library as the recommended library for dosimetry fusion applications. We also present work on validation of the neutron sub-library using a variety of fusion relevant computational and experimental benchmarks. A variety of cross section libraries are used for the validation work including FENDL-2.1, FENDL-3.1d, FENDL-3.2, ENDF/B-VIII.0, and JEFF-3.2 with the emphasis on the FENDL libraries. The results of the experimental validation showed that the performance of FENDL-3.2b is at least as good and in most cases better than FENDL-2.1.
Future work will consider improved evaluations developed by the International Nuclear Data Evaluation Network (INDEN). Additional work will be needed to investigate differences in gas production in structural materials. Covariance matrices need to be updated to support the development of fusion technology. Additional validation work for high-energy neutrons, protons and deuterons, and the activation library will be needed.
△ Less
Submitted 17 November, 2023; v1 submitted 16 November, 2023;
originally announced November 2023.
-
TrackFlow: Multi-Object Tracking with Normalizing Flows
Authors:
Gianluca Mancusi,
Aniello Panariello,
Angelo Porrello,
Matteo Fabbri,
Simone Calderara,
Rita Cucchiara
Abstract:
The field of multi-object tracking has recently seen a renewed interest in the good old schema of tracking-by-detection, as its simplicity and strong priors spare it from the complex design and painful babysitting of tracking-by-attention approaches. In view of this, we aim at extending tracking-by-detection to multi-modal settings, where a comprehensive cost has to be computed from heterogeneous…
▽ More
The field of multi-object tracking has recently seen a renewed interest in the good old schema of tracking-by-detection, as its simplicity and strong priors spare it from the complex design and painful babysitting of tracking-by-attention approaches. In view of this, we aim at extending tracking-by-detection to multi-modal settings, where a comprehensive cost has to be computed from heterogeneous information e.g., 2D motion cues, visual appearance, and pose estimates. More precisely, we follow a case study where a rough estimate of 3D information is also available and must be merged with other traditional metrics (e.g., the IoU). To achieve that, recent approaches resort to either simple rules or complex heuristics to balance the contribution of each cost. However, i) they require careful tuning of tailored hyperparameters on a hold-out set, and ii) they imply these costs to be independent, which does not hold in reality. We address these issues by building upon an elegant probabilistic formulation, which considers the cost of a candidate association as the negative log-likelihood yielded by a deep density estimator, trained to model the conditional joint probability distribution of correct associations. Our experiments, conducted on both simulated and real benchmarks, show that our approach consistently enhances the performance of several tracking-by-detection algorithms.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
MOTSynth: How Can Synthetic Data Help Pedestrian Detection and Tracking?
Authors:
Matteo Fabbri,
Guillem Braso,
Gianluca Maugeri,
Orcun Cetintas,
Riccardo Gasparini,
Aljosa Osep,
Simone Calderara,
Laura Leal-Taixe,
Rita Cucchiara
Abstract:
Deep learning-based methods for video pedestrian detection and tracking require large volumes of training data to achieve good performance. However, data acquisition in crowded public environments raises data privacy concerns -- we are not allowed to simply record and store data without the explicit consent of all participants. Furthermore, the annotation of such data for computer vision applicati…
▽ More
Deep learning-based methods for video pedestrian detection and tracking require large volumes of training data to achieve good performance. However, data acquisition in crowded public environments raises data privacy concerns -- we are not allowed to simply record and store data without the explicit consent of all participants. Furthermore, the annotation of such data for computer vision applications usually requires a substantial amount of manual effort, especially in the video domain. Labeling instances of pedestrians in highly crowded scenarios can be challenging even for human annotators and may introduce errors in the training data. In this paper, we study how we can advance different aspects of multi-person tracking using solely synthetic data. To this end, we generate MOTSynth, a large, highly diverse synthetic dataset for object detection and tracking using a rendering game engine. Our experiments show that MOTSynth can be used as a replacement for real data on tasks such as pedestrian detection, re-identification, segmentation, and tracking.
△ Less
Submitted 21 August, 2021;
originally announced August 2021.
-
Inter-Homines: Distance-Based Risk Estimation for Human Safety
Authors:
Matteo Fabbri,
Fabio Lanzi,
Riccardo Gasparini,
Simone Calderara,
Lorenzo Baraldi,
Rita Cucchiara
Abstract:
In this document, we report our proposal for modeling the risk of possible contagiousity in a given area monitored by RGB cameras where people freely move and interact. Our system, called Inter-Homines, evaluates in real-time the contagion risk in a monitored area by analyzing video streams: it is able to locate people in 3D space, calculate interpersonal distances and predict risk levels by build…
▽ More
In this document, we report our proposal for modeling the risk of possible contagiousity in a given area monitored by RGB cameras where people freely move and interact. Our system, called Inter-Homines, evaluates in real-time the contagion risk in a monitored area by analyzing video streams: it is able to locate people in 3D space, calculate interpersonal distances and predict risk levels by building dynamic maps of the monitored area. Inter-Homines works both indoor and outdoor, in public and private crowded areas. The software is applicable to already installed cameras or low-cost cameras on industrial PCs, equipped with an additional embedded edge-AI system for temporary measurements. From the AI-side, we exploit a robust pipeline for real-time people detection and localization in the ground plane by homographic transformation based on state-of-the-art computer vision algorithms; it is a combination of a people detector and a pose estimator. From the risk modeling side, we propose a parametric model for a spatio-temporal dynamic risk estimation, that, validated by epidemiologists, could be useful for safety monitoring the acceptance of social distancing prevention measures by predicting the risk level of the scene.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Compressed Volumetric Heatmaps for Multi-Person 3D Pose Estimation
Authors:
Matteo Fabbri,
Fabio Lanzi,
Simone Calderara,
Stefano Alletto,
Rita Cucchiara
Abstract:
In this paper we present a novel approach for bottom-up multi-person 3D human pose estimation from monocular RGB images. We propose to use high resolution volumetric heatmaps to model joint locations, devising a simple and effective compression method to drastically reduce the size of this representation. At the core of the proposed method lies our Volumetric Heatmap Autoencoder, a fully-convoluti…
▽ More
In this paper we present a novel approach for bottom-up multi-person 3D human pose estimation from monocular RGB images. We propose to use high resolution volumetric heatmaps to model joint locations, devising a simple and effective compression method to drastically reduce the size of this representation. At the core of the proposed method lies our Volumetric Heatmap Autoencoder, a fully-convolutional network tasked with the compression of ground-truth heatmaps into a dense intermediate representation. A second model, the Code Predictor, is then trained to predict these codes, which can be decompressed at test time to re-obtain the original representation. Our experimental evaluation shows that our method performs favorably when compared to state of the art on both multi-person and single-person 3D human pose estimation datasets and, thanks to our novel compression strategy, can process full-HD images at the constant runtime of 8 fps regardless of the number of subjects in the scene. Code and models available at https://github.com/fabbrimatteo/LoCO .
△ Less
Submitted 1 April, 2020;
originally announced April 2020.
-
Domain Translation with Conditional GANs: from Depth to RGB Face-to-Face
Authors:
Matteo Fabbri,
Guido Borghi,
Fabio Lanzi,
Roberto Vezzani,
Simone Calderara,
Rita Cucchiara
Abstract:
Can faces acquired by low-cost depth sensors be useful to catch some characteristic details of the face? Typically the answer is no. However, new deep architectures can generate RGB images from data acquired in a different modality, such as depth data. In this paper, we propose a new \textit{Deterministic Conditional GAN}, trained on annotated RGB-D face datasets, effective for a face-to-face tran…
▽ More
Can faces acquired by low-cost depth sensors be useful to catch some characteristic details of the face? Typically the answer is no. However, new deep architectures can generate RGB images from data acquired in a different modality, such as depth data. In this paper, we propose a new \textit{Deterministic Conditional GAN}, trained on annotated RGB-D face datasets, effective for a face-to-face translation from depth to RGB. Although the network cannot reconstruct the exact somatic features for unknown individual faces, it is capable to reconstruct plausible faces; their appearance is accurate enough to be used in many pattern recognition tasks. In fact, we test the network capability to hallucinate with some \textit{Perceptual Probes}, as for instance face aspect classification or landmark detection. Depth face can be used in spite of the correspondent RGB images, that often are not available due to difficult luminance conditions. Experimental results are very promising and are as far as better than previously proposed approaches: this domain translation can constitute a new way to exploit depth data in new future applications.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
Can Adversarial Networks Hallucinate Occluded People With a Plausible Aspect?
Authors:
Federico Fulgeri,
Matteo Fabbri,
Stefano Alletto,
Simone Calderara,
Rita Cucchiara
Abstract:
When you see a person in a crowd, occluded by other persons, you miss visual information that can be used to recognize, re-identify or simply classify him or her. You can imagine its appearance given your experience, nothing more. Similarly, AI solutions can try to hallucinate missing information with specific deep learning architectures, suitably trained with people with and without occlusions. T…
▽ More
When you see a person in a crowd, occluded by other persons, you miss visual information that can be used to recognize, re-identify or simply classify him or her. You can imagine its appearance given your experience, nothing more. Similarly, AI solutions can try to hallucinate missing information with specific deep learning architectures, suitably trained with people with and without occlusions. The goal of this work is to generate a complete image of a person, given an occluded version in input, that should be a) without occlusion b) similar at pixel level to a completely visible people shape c) capable to conserve similar visual attributes (e.g. male/female) of the original one. For the purpose, we propose a new approach by integrating the state-of-the-art of neural network architectures, namely U-nets and GANs, as well as discriminative attribute classification nets, with an architecture specifically designed to de-occlude people shapes. The network is trained to optimize a Loss function which could take into account the aforementioned objectives. As well we propose two datasets for testing our solution: the first one, occluded RAP, created automatically by occluding real shapes of the RAP dataset (which collects also attributes of the people aspect); the second is a large synthetic dataset, AiC, generated in computer graphics with data extracted from the GTA video game, that contains 3D data of occluded objects by construction. Results are impressive and outperform any other previous proposal. This result could be an initial step to many further researches to recognize people and their behavior in an open crowded world.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
Learning to Detect and Track Visible and Occluded Body Joints in a Virtual World
Authors:
Matteo Fabbri,
Fabio Lanzi,
Simone Calderara,
Andrea Palazzi,
Roberto Vezzani,
Rita Cucchiara
Abstract:
Multi-People Tracking in an open-world setting requires a special effort in precise detection. Moreover, temporal continuity in the detection phase gains more importance when scene cluttering introduces the challenging problems of occluded targets. For the purpose, we propose a deep network architecture that jointly extracts people body parts and associates them across short temporal spans. Our mo…
▽ More
Multi-People Tracking in an open-world setting requires a special effort in precise detection. Moreover, temporal continuity in the detection phase gains more importance when scene cluttering introduces the challenging problems of occluded targets. For the purpose, we propose a deep network architecture that jointly extracts people body parts and associates them across short temporal spans. Our model explicitly deals with occluded body parts, by hallucinating plausible solutions of not visible joints. We propose a new end-to-end architecture composed by four branches (visible heatmaps, occluded heatmaps, part affinity fields and temporal affinity fields) fed by a time linker feature extractor. To overcome the lack of surveillance data with tracking, body part and occlusion annotations we created the vastest Computer Graphics dataset for people tracking in urban scenarios by exploiting a photorealistic videogame. It is up to now the vastest dataset (about 500.000 frames, almost 10 million body poses) of human body parts for people tracking in urban scenarios. Our architecture trained on virtual data exhibits good generalization capabilities also on public real tracking benchmarks, when image resolution and sharpness are high enough, producing reliable tracklets useful for further batch data association or re-id modules.
△ Less
Submitted 18 September, 2018; v1 submitted 22 March, 2018;
originally announced March 2018.
-
Face-from-Depth for Head Pose Estimation on Depth Images
Authors:
Guido Borghi,
Matteo Fabbri,
Roberto Vezzani,
Simone Calderara,
Rita Cucchiara
Abstract:
Depth cameras allow to set up reliable solutions for people monitoring and behavior understanding, especially when unstable or poor illumination conditions make unusable common RGB sensors. Therefore, we propose a complete framework for the estimation of the head and shoulder pose based on depth images only. A head detection and localization module is also included, in order to develop a complete…
▽ More
Depth cameras allow to set up reliable solutions for people monitoring and behavior understanding, especially when unstable or poor illumination conditions make unusable common RGB sensors. Therefore, we propose a complete framework for the estimation of the head and shoulder pose based on depth images only. A head detection and localization module is also included, in order to develop a complete end-to-end system. The core element of the framework is a Convolutional Neural Network, called POSEidon+, that receives as input three types of images and provides the 3D angles of the pose as output. Moreover, a Face-from-Depth component based on a Deterministic Conditional GAN model is able to hallucinate a face from the corresponding depth image. We empirically demonstrate that this positively impacts the system performances. We test the proposed framework on two public datasets, namely Biwi Kinect Head Pose and ICT-3DHP, and on Pandora, a new challenging dataset mainly inspired by the automotive setup. Experimental results show that our method overcomes several recent state-of-art works based on both intensity and depth input data, running in real-time at more than 30 frames per second.
△ Less
Submitted 30 August, 2018; v1 submitted 12 December, 2017;
originally announced December 2017.
-
Generative Adversarial Models for People Attribute Recognition in Surveillance
Authors:
Matteo Fabbri,
Simone Calderara,
Rita Cucchiara
Abstract:
In this paper we propose a deep architecture for detecting people attributes (e.g. gender, race, clothing ...) in surveillance contexts. Our proposal explicitly deal with poor resolution and occlusion issues that often occur in surveillance footages by enhancing the images by means of Deep Convolutional Generative Adversarial Networks (DCGAN). Experiments show that by combining both our Generative…
▽ More
In this paper we propose a deep architecture for detecting people attributes (e.g. gender, race, clothing ...) in surveillance contexts. Our proposal explicitly deal with poor resolution and occlusion issues that often occur in surveillance footages by enhancing the images by means of Deep Convolutional Generative Adversarial Networks (DCGAN). Experiments show that by combining both our Generative Reconstruction and Deep Attribute Classification Network we can effectively extract attributes even when resolution is poor and in presence of strong occlusions up to 80\% of the whole person figure.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Very Low Cost Entropy Source Based on Chaotic Dynamics Retrofittable on Networked Devices to Prevent RNG Attacks
Authors:
Mattia Fabbri,
Sergio Callegari
Abstract:
Good quality entropy sources are indispensable in most modern cryptographic protocols. Unfortunately, many currently deployed networked devices do not include them and may be vulnerable to Random Number Generator (RNG) attacks. Since most of these systems allow firmware upgrades and have serial communication facilities, the potential for retrofitting them with secure hardware-based entropy sources…
▽ More
Good quality entropy sources are indispensable in most modern cryptographic protocols. Unfortunately, many currently deployed networked devices do not include them and may be vulnerable to Random Number Generator (RNG) attacks. Since most of these systems allow firmware upgrades and have serial communication facilities, the potential for retrofitting them with secure hardware-based entropy sources exists. To this aim, very low-cost, robust, easy to deploy solutions are required. Here, a retrofittable, sub 10$ entropy source based on chaotic dynamics is illustrated, capable of a 32 kbit/s rate or more and offering multiple serial communication options including USB, I2C, SPI or USART. Operation is based on a loop built around the Analog to Digital Converter (ADC) hosted on a standard microcontroller.
△ Less
Submitted 17 December, 2014;
originally announced December 2014.
