Showing 1–38 of 38 results for author: Elbir, A M

The Curse of Beam-Squint in ISAC: Causes, Implications, and Mitigation Strategies

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Abdulkadir Celik, Ahmed M. Eltawil

Abstract: Integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize spectrum and thereby save cost and power. At the higher end of the spectrum, ISAC systems operate at wideband using large antenna arrays to meet the stringent demands for high-resolution sensing and enhanced communications capacity. However, the wideband implementation entails beam-squint, that is, deviation… ▽ More Integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize spectrum and thereby save cost and power. At the higher end of the spectrum, ISAC systems operate at wideband using large antenna arrays to meet the stringent demands for high-resolution sensing and enhanced communications capacity. However, the wideband implementation entails beam-squint, that is, deviations in the generated beam directions because of the narrowband assumption in the analog components. This causes significant degradation in the communications capacity, target detection, and parameter estimation. This article presents the design challenges caused by beam-squint and its mitigation in ISAC systems. In this context, we also discuss several ISAC design perspectives including far-/near-field beamforming, channel/direction estimation, sparse array design, and index modulation. There are also several research opportunities in waveform design, beam training, and array processing to adequately address beam-squint in ISAC. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: Accepted Paper in IEEE Communications Magazine

Index Modulation for Integrated Sensing and Communications: A Signal Processing Perspective

Authors: Ahmet M. Elbir, Abdulkadir Celik, Ahmed M. Eltawil, Moeness G. Amin

Abstract: A joint design of both sensing and communication can lead to substantial enhancement for both subsystems in terms of size, cost as well as spectrum and hardware efficiency. In the last decade, integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize the spectrum on a single and shared hardware platform. Recent studies focused on develo** multi-function approache… ▽ More A joint design of both sensing and communication can lead to substantial enhancement for both subsystems in terms of size, cost as well as spectrum and hardware efficiency. In the last decade, integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize the spectrum on a single and shared hardware platform. Recent studies focused on develo** multi-function approaches to share the spectrum between radar sensing and communications. Index modulation (IM) is one particular approach to incorporate information-bearing communication symbols into the emitted radar waveforms. While IM has been well investigated in communications-only systems, the implementation adoption of IM concept in ISAC has recently attracted researchers to achieve improved energy/spectral efficiency while maintaining satisfactory radar sensing performance. This article focuses on recent studies on IM-ISAC, and presents in detail the analytical background and relevance of the major IM-ISAC applications. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 11pages5figures, submitted to IEEE

Cooperative RIS and STAR-RIS assisted mMIMO Communication: Analysis and Optimization

Authors: Anastasios Papazafeiropoulos, Ahmet M. Elbir, Pandelis Kourtessis, Ioannis Krikidis, Symeon Chatzinotas

Abstract: Reconfigurable intelligent surface (RIS) has emerged as a cost-effective and promising solution to extend the wireless signal coverage and improve the performance via passive signal reflection. Different from existing works which do not account for the cooperation between RISs or do not provide full space coverage, we propose the marriage of cooperative double-RIS with simultaneously transmitting… ▽ More Reconfigurable intelligent surface (RIS) has emerged as a cost-effective and promising solution to extend the wireless signal coverage and improve the performance via passive signal reflection. Different from existing works which do not account for the cooperation between RISs or do not provide full space coverage, we propose the marriage of cooperative double-RIS with simultaneously transmitting and reflecting RIS (STAR-RIS) technologies denoted as RIS/STAR-RIS under correlated Rayleigh fading conditions to assist the communication in a massive multiple-input multiple-output (mMIMO) setup. The proposed architecture is superior since it enjoys the benefits of the individual designs. We introduce a channel estimation approach of the cascaded channels with reduced overhead. Also, we obtain the deterministic equivalent (DE) of the downlink achievable sum spectral efficiency (SE) in closed form based on large-scale statistics. Notably, relied on statistical channel state information (CSI), we optimise both surfaces by means of the projected gradient ascent method (PGAM), and obtain the gradients in closed form. The proposed optimization achieves to maximise the sum SE of such a complex system, and has low complexity and low overhead since it can be performed at every several coherence intervals. Numerical results show the benefit of the proposed architecture and verify the analytical framework. In particular, we show that the RIS/STAR-RIS architecture outperforms the conventional double-RIS or its single-RIS counterparts. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Comments: accepted in IEEE TVT

NEAT-MUSIC: Auto-calibration of DOA Estimation for Terahertz-Band Massive MIMO Systems

Authors: Ahmet M. Elbir, Abdulkadir Celik, Ahmed M. Eltawil

Abstract: Terahertz (THz) band is envisioned for the future sixth generation wireless systems thanks to its abundant bandwidth and very narrow beamwidth. These features are one of the key enabling factors for high resolution sensing with milli-degree level direction-of-arrival (DOA) estimation. Therefore, this paper investigates the DOA estimation problem in THz systems in the presence of two major error so… ▽ More Terahertz (THz) band is envisioned for the future sixth generation wireless systems thanks to its abundant bandwidth and very narrow beamwidth. These features are one of the key enabling factors for high resolution sensing with milli-degree level direction-of-arrival (DOA) estimation. Therefore, this paper investigates the DOA estimation problem in THz systems in the presence of two major error sources: 1) gain-phase mismatches, which occur due to the deviations in the radio-frequency circuitry; 2) beam-squint, which is caused because of the deviations in the generated beams at different subcarriers due to ultra-wide bandwidth. An auto-calibration approach, namely NoisE subspAce correcTion technique for MUltiple SIgnal Classification (NEAT-MUSIC), is proposed based on the correction of the noise subspace for accurate DOA estimation in the presence of gain-phase mismatches and beam-squint. To gauge the performance of the proposed approach, the Cramer-Rao bounds are also derived. Numerical results show the effectiveness of the proposed approach. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Comments: Accepted paper in IEEE Wireless Communications Letters. arXiv admin note: text overlap with arXiv:2310.16724

Spherical Wavefront Near-Field DoA Estimation in THz Automotive Radar

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Symeon Chatzinotas

Abstract: Automotive radar at terahertz (THz) band has the potential to provide compact design. The availability of wide bandwidth at THz-band leads to high range resolution. Further, very narrow beamwidth arising from large arrays yields high angular resolution up to milli-degree level direction-of-arrival (DoA) estimation. At THz frequencies and extremely large arrays, the signal wavefront is spherical in… ▽ More Automotive radar at terahertz (THz) band has the potential to provide compact design. The availability of wide bandwidth at THz-band leads to high range resolution. Further, very narrow beamwidth arising from large arrays yields high angular resolution up to milli-degree level direction-of-arrival (DoA) estimation. At THz frequencies and extremely large arrays, the signal wavefront is spherical in the near-field that renders traditional far-field DoA estimation techniques unusable. In this work, we examine near-field DoA estimation for THz automotive radar. We propose an algorithm using multiple signal classification (MUSIC) to estimate target DoAs and ranges while also taking beam-squint in near-field into account. Using an array transformation approach, we compensate for near-field beam-squint in noise subspace computations to construct the beam-squint-free MUSIC spectra. Numerical experiments show the effectiveness of the proposed method to accurately estimate the target parameters. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Near-field Hybrid Beamforming for Terahertz-band Integrated Sensing and Communications

Authors: Ahmet M. Elbir, Abdulkadir Celik, Ahmed M. Eltawil

Abstract: Terahertz (THz) band communications and integrated sensing and communications (ISAC) are two main facets of the sixth generation wireless networks. In order to compensate the severe attenuation, the THz wireless systems employ large arrays, wherein the near-field beam-squint severely degrades the beamforming accuracy. Contrary to prior works that examine only either narrowband ISAC beamforming or… ▽ More Terahertz (THz) band communications and integrated sensing and communications (ISAC) are two main facets of the sixth generation wireless networks. In order to compensate the severe attenuation, the THz wireless systems employ large arrays, wherein the near-field beam-squint severely degrades the beamforming accuracy. Contrary to prior works that examine only either narrowband ISAC beamforming or far-field models, we introduce an alternating optimization technique for hybrid beamforming design in near-field THz-ISAC scenario. We also propose an efficient approach to compensate near-field beam-squint via baseband beamformers. Via numerical simulations, we show that the proposed approach achieves satisfactory spectral efficiency performance while accurately estimating the near-field beamformers and mitigating the beam-squint without additional hardware components. △ Less

Submitted 25 September, 2023; originally announced September 2023.

Comments: Accepted Paper in 2023 IEEE Global Communications Conference (GLOBECOM), Kuala Lumpur, Malaysia, 2023

Terahertz-Band Direction Finding With Beam-Split and Mutual Coupling Calibration

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Symeon Chatzinotas

Abstract: Terahertz (THz) band is currently envisioned as the key building block to achieving the future sixth generation (6G) wireless systems. The ultra-wide bandwidth and very narrow beamwidth of THz systems offer the next order of magnitude in user densities and multi-functional behavior. However, wide bandwidth results in a frequency-dependent beampattern causing the beams generated at different subcar… ▽ More Terahertz (THz) band is currently envisioned as the key building block to achieving the future sixth generation (6G) wireless systems. The ultra-wide bandwidth and very narrow beamwidth of THz systems offer the next order of magnitude in user densities and multi-functional behavior. However, wide bandwidth results in a frequency-dependent beampattern causing the beams generated at different subcarriers split and point to different directions. Furthermore, mutual coupling degrades the system's performance. This paper studies the compensation of both beam-split and mutual coupling for direction-of-arrival (DoA) estimation by modeling the beam-split and mutual coupling as an array imperfection. We propose a subspace-based approach using multiple signal classification with CalibRated for bEAam-split and Mutual coupling (CREAM-MUSIC) algorithm for this purpose. Via numerical simulations, we show the proposed CREAM-MUSIC approach accurately estimates the DoAs in the presence of beam-split and mutual coupling. △ Less

Submitted 7 September, 2023; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: accepted paper in IEEE Antennas and Wireless Propagation Letters, Special Issue on Mutual Coupling

Sparse Array Design for Direction Finding using Deep Learning

Authors: Kumar Vijay Mishra, Ahmet M. Elbir, Koichi Ichige

Abstract: In the past few years, deep learning (DL) techniques have been introduced for designing sparse arrays. These methods offer the advantages of feature engineering and low prediction-stage complexity, which is helpful in tackling the combinatorial search inherent to finding a sparse array. In this chapter, we provide a synopsis of several direction finding applications of DL-based sparse arrays. We b… ▽ More In the past few years, deep learning (DL) techniques have been introduced for designing sparse arrays. These methods offer the advantages of feature engineering and low prediction-stage complexity, which is helpful in tackling the combinatorial search inherent to finding a sparse array. In this chapter, we provide a synopsis of several direction finding applications of DL-based sparse arrays. We begin by examining supervised and transfer learning techniques that have applications in selecting sparse arrays for a cognitive radar application. Here, we also discuss the use of meta-heuristic learning algorithms such as simulated annealing for the case of designing two-dimensional sparse arrays. Next, we consider DL-based antenna selection for wireless communications, wherein sparse array problem may also be combined with channel estimation, beamforming, or localization. Finally, we provide an example of deep sparse array technique for integrated sensing and communications (ISAC) application, wherein a trade-off of radar and communications performance makes ISAC sparse array problem very challenging. For each setting, we illustrate the performance of model-based optimization and DL techniques through several numerical experiments. We discuss additional considerations required to ensure robustness of DL-based algorithms against various imperfections in array data. △ Less

Submitted 8 August, 2023; originally announced August 2023.

Comments: Book chapter, 39 pages, 20 figures, 4 tables. arXiv admin note: substantial text overlap with arXiv:2004.11637

Antenna Selection With Beam Squint Compensation for Integrated Sensing and Communications

Authors: Ahmet M. Elbir, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil

Abstract: Next-generation wireless networks strive for higher communication rates, ultra-low latency, seamless connectivity, and high-resolution sensing capabilities. To meet these demands, terahertz (THz)-band signal processing is envisioned as a key technology offering wide bandwidth and sub-millimeter wavelength. Furthermore, THz integrated sensing and communications (ISAC) paradigm has emerged jointly a… ▽ More Next-generation wireless networks strive for higher communication rates, ultra-low latency, seamless connectivity, and high-resolution sensing capabilities. To meet these demands, terahertz (THz)-band signal processing is envisioned as a key technology offering wide bandwidth and sub-millimeter wavelength. Furthermore, THz integrated sensing and communications (ISAC) paradigm has emerged jointly access spectrum and reduced hardware costs through a unified platform. To address the challenges in THz propagation, THz-ISAC systems employ extremely large antenna arrays to improve the beamforming gain for communications with high data rates and sensing with high resolution. However, the cost and power consumption of implementing fully digital beamformers are prohibitive. While hybrid analog/digital beamforming can be a potential solution, the use of subcarrier-independent analog beamformers leads to the beam-squint phenomenon where different subcarriers observe distinct directions because of adopting the same analog beamformer across all subcarriers. In this paper, we develop a sparse array architecture for THz-ISAC with hybrid beamforming to provide a cost-effective solution. We analyze the antenna selection problem under beam-squint influence and introduce a manifold optimization approach for hybrid beamforming design. To reduce computational and memory costs, we propose novel algorithms leveraging grouped subarrays, quantized performance metrics, and sequential optimization. These approaches yield a significant reduction in the number of possible subarray configurations, which enables us to devise a neural network with classification model to accurately perform antenna selection. △ Less

Submitted 14 July, 2023; originally announced July 2023.

Comments: 14pages10figures, submitted to IEEE

Spatial Path Index Modulation in mmWave/THz-Band Integrated Sensing and Communications

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil

Abstract: As the demand for wireless connectivity continues to soar, the fifth generation and beyond wireless networks are exploring new ways to efficiently utilize the wireless spectrum and reduce hardware costs. One such approach is the integration of sensing and communications (ISAC) paradigms to jointly access the spectrum. Recent ISAC studies have focused on upper millimeter-wave and low terahertz band… ▽ More As the demand for wireless connectivity continues to soar, the fifth generation and beyond wireless networks are exploring new ways to efficiently utilize the wireless spectrum and reduce hardware costs. One such approach is the integration of sensing and communications (ISAC) paradigms to jointly access the spectrum. Recent ISAC studies have focused on upper millimeter-wave and low terahertz bands to exploit ultrawide bandwidths. At these frequencies, hybrid beamformers that employ fewer radio-frequency chains are employed to offset expensive hardware but at the cost of lower multiplexing gains. Wideband hybrid beamforming also suffers from the beam-split effect arising from the subcarrier-independent (SI) analog beamformers. To overcome these limitations, this paper introduces a spatial path index modulation (SPIM) ISAC architecture, which transmits additional information bits via modulating the spatial paths between the base station and communications users. We design the SPIM-ISAC beamformers by first estimating both radar and communications parameters by develo** beam-split-aware algorithms. Then, we propose to employ a family of hybrid beamforming techniques such as hybrid, SI, and subcarrier-dependent analog-only, and beam-split-aware beamformers. Numerical experiments demonstrate that the proposed SPIM-ISAC approach exhibits significantly improved spectral efficiency performance in the presence of beam-split than that of even fully digital non-SPIM beamformers. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Comments: 30pages, Submitted to the IEEE journals

Near-Field Terahertz Communications: Model-Based and Model-Free Channel Estimation

Authors: Ahmet M. Elbir, Wei Shi, Anastasios K. Papazafeiropoulos, Pandelis Kourtessis, Symeon Chatzinotas

Abstract: Terahertz (THz) band is expected to be one of the key enabling technologies of the sixth generation (6G) wireless networks because of its abundant available bandwidth and very narrow beam width. Due to high frequency operations, electrically small array apertures are employed, and the signal wavefront becomes spherical in the near-field. Therefore, near-field signal model should be considered for… ▽ More Terahertz (THz) band is expected to be one of the key enabling technologies of the sixth generation (6G) wireless networks because of its abundant available bandwidth and very narrow beam width. Due to high frequency operations, electrically small array apertures are employed, and the signal wavefront becomes spherical in the near-field. Therefore, near-field signal model should be considered for channel acquisition in THz systems. Unlike prior works which mostly ignore the impact of near-field beam-split (NB) and consider either narrowband scenario or far-field models, this paper introduces both a model-based and a model-free techniques for wideband THz channel estimation in the presence of NB. The model-based approach is based on orthogonal matching pursuit (OMP) algorithm, for which we design an NB-aware dictionary. The key idea is to exploit the angular and range deviations due to the NB. We then employ the OMP algorithm, which accounts for the deviations thereby ipso facto mitigating the effect of NB. We further introduce a federated learning (FL)-based approach as a model-free solution for channel estimation in a multi-user scenario to achieve reduced complexity and training overhead. Through numerical simulations, we demonstrate the effectiveness of the proposed channel estimation techniques for wideband THz systems in comparison with the existing state-of-the-art techniques. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: This work has been submitted to the IEEE for publication. Copyright may be transferred without notice, after which this version may no longer be accessible. arXiv admin note: text overlap with arXiv:2302.01682

Journal ref: IEEE ACCESS, 2023

BSA-OMP: Beam-Split-Aware Orthogonal Matching Pursuit for THz Channel Estimation

Authors: Ahmet M. Elbir, Symeon Chatzinotas

Abstract: Terahertz (THz)-band has been envisioned for the sixth generation wireless networks thanks to its ultra-wide bandwidth and very narrow beamwidth. Nevertheless, THz-band transmission faces several unique challenges, one of which is beam-split which occurs due to the usage of subcarrier-independent analog beamformers and causes the generated beams at different subcarriers split, and point to differe… ▽ More Terahertz (THz)-band has been envisioned for the sixth generation wireless networks thanks to its ultra-wide bandwidth and very narrow beamwidth. Nevertheless, THz-band transmission faces several unique challenges, one of which is beam-split which occurs due to the usage of subcarrier-independent analog beamformers and causes the generated beams at different subcarriers split, and point to different directions. Unlike the prior works dealing with beam-split by employing additional complex hardware components, e.g., time-delayer networks, a beam-split-aware orthogonal matching pursuit (BSA-OMP) approach is introduced to efficiently estimate the THz channel and beamformer design without any additional hardware. Specifically, we design a BSA dictionary comprised of beam-split-corrected steering vectors which inherently include the effect of beam-split so that the proposed BSA-OMP solution automatically yields the beam-split-corrected physical channel directions. Numerical results demonstrate the superior performance of BSA-OMP approach against the existing state-of-the-art techniques. △ Less

Submitted 5 February, 2023; originally announced February 2023.

Comments: Accepted Paper in IEEE Wireless Communications Letters

Journal ref: IEEE Wireless Communications Letters, 2023

NBA-OMP: Near-field Beam-Split-Aware Orthogonal Matching Pursuit for Wideband THz Channel Estimation

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Symeon Chatzinotas

Abstract: The sixth-generation networks envision the terahertz (THz) band as one of the key enabling technologies because of its ultrawide bandwidth. To combat the severe attenuation, the THz wireless systems employ large arrays, wherein the near-field beam-split (NB) severely degrades the accuracy of channel acquisition. Contrary to prior works that examine only either narrowband beamforming or far-field m… ▽ More The sixth-generation networks envision the terahertz (THz) band as one of the key enabling technologies because of its ultrawide bandwidth. To combat the severe attenuation, the THz wireless systems employ large arrays, wherein the near-field beam-split (NB) severely degrades the accuracy of channel acquisition. Contrary to prior works that examine only either narrowband beamforming or far-field models, we estimate the wideband THz channel via an NB-aware orthogonal matching pursuit (NBA-OMP) approach. We design an NBA dictionary of near-field steering vectors by exploiting the corresponding angular and range deviation. Our OMP algorithm accounts for this deviation thereby ipso facto mitigating the effect of NB. Numerical experiments demonstrate the effectiveness of the proposed channel estimation technique for wideband THz systems. △ Less

Submitted 16 February, 2023; v1 submitted 3 February, 2023; originally announced February 2023.

Comments: Accepted Paper in 2023 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP)

Millimeter-Wave Radar Beamforming with Spatial Path Index Modulation Communications

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Abdulkadir Çelik, Ahmed M. Eltawil

Abstract: To efficiently utilize the wireless spectrum and save hardware costs, the fifth generation and beyond (B5G) wireless networks envisage integrated sensing and communications (ISAC) paradigms to jointly access the spectrum. In B5G systems, the expensive hardware is usually avoided by employing hybrid beamformers that employ fewer radio-frequency chains but at the cost of the multiplexing gain. Recen… ▽ More To efficiently utilize the wireless spectrum and save hardware costs, the fifth generation and beyond (B5G) wireless networks envisage integrated sensing and communications (ISAC) paradigms to jointly access the spectrum. In B5G systems, the expensive hardware is usually avoided by employing hybrid beamformers that employ fewer radio-frequency chains but at the cost of the multiplexing gain. Recently, it has been proposed to overcome this shortcoming of millimeter wave (mmWave) hybrid beamformers through spatial path index modulation (SPIM), which modulates the spatial paths between the base station and users and improves spectral efficiency. In this paper, we propose an SPIM-ISAC approach for hybrid beamforming to simultaneously generate beams toward both radar targets and communications users. We introduce a low complexity approach for the design of hybrid beamformers, which include radar-only and communications-only beamformers. Numerical experiments demonstrate that our SPIM-ISAC approach exhibits a significant performance improvement over the conventional mmWave-ISAC design in terms of spectral efficiency and the generated beampattern. △ Less

Submitted 22 January, 2023; v1 submitted 8 November, 2022; originally announced November 2022.

Comments: Accepted paper in 2023 IEEE Radar Conference

Twenty-Five Years of Advances in Beamforming: From Convex and Nonconvex Optimization to Learning Techniques

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Sergiy A. Vorobyov, Robert W. Heath Jr

Abstract: Beamforming is a signal processing technique to steer, shape, and focus an electromagnetic wave using an array of sensors toward a desired direction. It has been used in several engineering applications such as radar, sonar, acoustics, astronomy, seismology, medical imaging, and communications. With the advances in multi-antenna technologies largely for radar and communications, there has been a g… ▽ More Beamforming is a signal processing technique to steer, shape, and focus an electromagnetic wave using an array of sensors toward a desired direction. It has been used in several engineering applications such as radar, sonar, acoustics, astronomy, seismology, medical imaging, and communications. With the advances in multi-antenna technologies largely for radar and communications, there has been a great interest on beamformer design mostly relying on convex/nonconvex optimization. Recently, machine learning is being leveraged for obtaining attractive solutions to more complex beamforming problems. This article captures the evolution of beamforming in the last twenty-five years from convex-to-nonconvex optimization and optimization-to-learning approaches. It provides a glimpse of this important signal processing technique into a variety of transmit-receive architectures, propagation zones, paths, and conventional/emerging applications. △ Less

Submitted 22 March, 2023; v1 submitted 3 November, 2022; originally announced November 2022.

Comments: Accepted Paper in IEEE Signal Processing Magazine Special Issue on the 75th Anniversary of IEEE Signal Processing Society

Journal ref: IEEE Signal Processing Magazine 2023 Volume 40 , Issue 4

A Unified Approach for Beam-Split Mitigation in Terahertz Wideband Hybrid Beamforming

Authors: Ahmet M. Elbir

Abstract: The sixth generation networks envision the deployment of terahertz (THz) band as one of the key enabling property thanks to its abundant bandwidth. However, the ultra-wide bandwidth in THz causes beam-split phenomenon due to the use of a single analog beamformer (AB). Specifically, beam-split makes different subcarriers to observe distinct directions since the same AB is adopted for all subcarrier… ▽ More The sixth generation networks envision the deployment of terahertz (THz) band as one of the key enabling property thanks to its abundant bandwidth. However, the ultra-wide bandwidth in THz causes beam-split phenomenon due to the use of a single analog beamformer (AB). Specifically, beam-split makes different subcarriers to observe distinct directions since the same AB is adopted for all subcarriers. Previous works mostly employ additional hardware components, e.g., time-delayer networks to mitigate beam-split by realizing virtual subcarrier-dependent ABs. This paper introduces an efficient and unified approach, called beam-split-aware (BSA) hybrid beamforming. In particular, instead of virtually generating subcarrier-dependent ABs, a single AB is used and the effect of beam-split is computed and passed into the digital beamformers, which are subcarrier-dependent while maximizing spectral efficiency. Hence, the proposed BSA approach effectively mitigates the impact of beam-split and it can be applied to any hybrid beamforming architecture. Manifold optimization and orthogonal matching pursuit techniques are considered for the evaluation of the proposed approach in multi-user scenario. Numerical simulations show that significant performance improvement can be achieved as compared to the conventional techniques. △ Less

Submitted 10 April, 2023; v1 submitted 24 September, 2022; originally announced September 2022.

Comments: Accepted Paper in IEEE Transactions on Vehicular Technology

Terahertz-Band Channel and Beam Split Estimation via Array Perturbation Model

Authors: Ahmet M. Elbir, Wei Shi, Anastasios K. Papazafeiropoulos, Pandelis Kourtessis, Symeon Chatzinotas

Abstract: For the demonstration of ultra-wideband bandwidth and pencil-beamforming, the terahertz (THz)-band has been envisioned as one of the key enabling technologies for the sixth generation networks. However, the acquisition of the THz channel entails several unique challenges such as severe path loss and beam-split. Prior works usually employ ultra-massive arrays and additional hardware components comp… ▽ More For the demonstration of ultra-wideband bandwidth and pencil-beamforming, the terahertz (THz)-band has been envisioned as one of the key enabling technologies for the sixth generation networks. However, the acquisition of the THz channel entails several unique challenges such as severe path loss and beam-split. Prior works usually employ ultra-massive arrays and additional hardware components comprised of time-delayers to compensate for these loses. In order to provide a cost-effective solution, this paper introduces a sparse-Bayesian-learning (SBL) technique for joint channel and beam-split estimation. Specifically, we first model the beam-split as an array perturbation inspired from array signal processing. Next, a low-complexity approach is developed by exploiting the line-of-sight-dominant feature of THz channel to reduce the computational complexity involved in the proposed SBL technique for channel estimation (SBCE). Additionally, based on federated-learning, we implement a model-free technique to the proposed model-based SBCE solution. Further to that, we examine the near-field considerations of THz channel, and introduce the range-dependent near-field beam-split. The theoretical performance bounds, i.e., Cramér-Rao lower bounds, are derived both for near- and far-field parameters, e.g., user directions, beam-split and ranges. Numerical simulations demonstrate that SBCE outperforms the existing approaches and exhibits lower hardware cost. △ Less

Submitted 1 April, 2023; v1 submitted 7 August, 2022; originally announced August 2022.

Comments: Accepted Paper in IEEE Open Journal of Communications Society

Federated Multi-Task Learning for THz Wideband Channel and DoA Estimation

Authors: Ahmet M. Elbir, Wei Shi, Kumar Vijay Mishra, Symeon Chatzinotas

Abstract: This paper addresses two major challenges in terahertz (THz) channel estimation: the beam-split phenomenon, i.e., beam misalignment because of frequency-independent analog beamformers, and computational complexity because of the usage of ultra-massive number of antennas to compensate propagation losses. Data-driven techniques are known to mitigate the complexity of this problem but usually require… ▽ More This paper addresses two major challenges in terahertz (THz) channel estimation: the beam-split phenomenon, i.e., beam misalignment because of frequency-independent analog beamformers, and computational complexity because of the usage of ultra-massive number of antennas to compensate propagation losses. Data-driven techniques are known to mitigate the complexity of this problem but usually require the transmission of the datasets from the users to a central server entailing huge communication overhead. In this work, we introduce a federated multi-task learning (FMTL), wherein the users transmit only the model parameters instead of the whole dataset, for THz channel and user direction-of-arrival (DoA) estimation to improve the communications-efficiency. We first propose a novel beamspace support alignment technique for channel estimation with beam-split correction. Then, the channel and DoA information are used as labels to train an FMTL model. By exploiting the sparsity of the THz channel, the proposed approach is implemented with fewer pilot signals than the traditional techniques. Compared to the previous works, our FMTL approach provides higher channel estimation accuracy as well as approximately 25 (32) times lower model (channel) training overhead, respectively. △ Less

Submitted 27 October, 2022; v1 submitted 13 July, 2022; originally announced July 2022.

Comments: submitted to an IEEE journal

Implicit Channel Learning for Machine Learning Applications in 6G Wireless Networks

Authors: Ahmet M. Elbir, Wei Shi, Kumar Vijay Mishra, Anastasios K. Papazafeiropoulos, Symeon Chatzinotas

Abstract: With the deployment of the fifth generation (5G) wireless systems gathering momentum across the world, possible technologies for 6G are under active research discussions. In particular, the role of machine learning (ML) in 6G is expected to enhance and aid emerging applications such as virtual and augmented reality, vehicular autonomy, and computer vision. This will result in large segments of wir… ▽ More With the deployment of the fifth generation (5G) wireless systems gathering momentum across the world, possible technologies for 6G are under active research discussions. In particular, the role of machine learning (ML) in 6G is expected to enhance and aid emerging applications such as virtual and augmented reality, vehicular autonomy, and computer vision. This will result in large segments of wireless data traffic comprising image, video and speech. The ML algorithms process these for classification/recognition/estimation through the learning models located on cloud servers. This requires wireless transmission of data from edge devices to the cloud server. Channel estimation, handled separately from recognition step, is critical for accurate learning performance. Toward combining the learning for both channel and the ML data, we introduce implicit channel learning to perform the ML tasks without estimating the wireless channel. Here, the ML models are trained with channel-corrupted datasets in place of nominal data. Without channel estimation, the proposed approach exhibits approximately 60% improvement in image and speech classification tasks for diverse scenarios such as millimeter wave and IEEE 802.11p vehicular channels. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Comments: 7Pages, submitted to IEEE

Federated Channel Learning for Intelligent Reflecting Surfaces With Fewer Pilot Signals

Authors: Ahmet M. Elbir, Sinem Coleri, Kumar Vijay Mishra

Abstract: Channel estimation is a critical task in intelligent reflecting surface (IRS)-assisted wireless systems due to the uncertainties imposed by environment dynamics and rapid changes in the IRS configuration. To deal with these uncertainties, deep learning (DL) approaches have been proposed. Previous works consider centralized learning (CL) approach for model training, which entails the collection of… ▽ More Channel estimation is a critical task in intelligent reflecting surface (IRS)-assisted wireless systems due to the uncertainties imposed by environment dynamics and rapid changes in the IRS configuration. To deal with these uncertainties, deep learning (DL) approaches have been proposed. Previous works consider centralized learning (CL) approach for model training, which entails the collection of the whole training dataset from the users at the base station (BS), hence introducing huge transmission overhead for data collection. To address this challenge, this paper proposes a federated learning (FL) framework to jointly estimate both direct and cascaded channels in IRS-assisted wireless systems. We design a single convolutional neural network trained on the local datasets of the users without sending them to the BS. We show that the proposed FL-based channel estimation approach requires approximately 60% fewer pilot signals and it exhibits 12 times lower transmission overhead than CL, while maintaining satisfactory performance close to CL. In addition, it provides lower estimation error than the state-of-the-art DL-based schemes. △ Less

Submitted 6 May, 2022; originally announced May 2022.

Comments: 5pages2figures Accepted paper in IEEE SAM 2022. arXiv admin note: substantial text overlap with arXiv:2008.10846

Journal ref: 2022 IEEE 12th Sensor Array and Multichannel Signal Processing Workshop (SAM)

The Rise of Intelligent Reflecting Surfaces in Integrated Sensing and Communications Paradigms

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, M. R. Bhavani Shankar, Symeon Chatzinotas

Abstract: The intelligent reflecting surface (IRS) alters the behavior of wireless media and, consequently, has potential to improve the performance and reliability of wireless systems such as communications and radar remote sensing. Recently, integrated sensing and communications (ISAC) has been widely studied as a means to efficiently utilize spectrum and thereby save cost and power. This article investig… ▽ More The intelligent reflecting surface (IRS) alters the behavior of wireless media and, consequently, has potential to improve the performance and reliability of wireless systems such as communications and radar remote sensing. Recently, integrated sensing and communications (ISAC) has been widely studied as a means to efficiently utilize spectrum and thereby save cost and power. This article investigates the role of IRS in the future ISAC paradigms. While there is a rich heritage of recent research into IRS-assisted communications, the IRS-assisted radars and ISAC remain relatively unexamined. We discuss the putative advantages of IRS deployment, such as coverage extension, interference suppression, and enhanced parameter estimation, for both communications and radar. We introduce possible IRS-assisted ISAC scenarios with common and dedicated surfaces. The article provides an overview of related signal processing techniques and the design challenges, such as wireless channel acquisition, waveform design, and security. △ Less

Submitted 20 December, 2022; v1 submitted 14 April, 2022; originally announced April 2022.

Comments: Accepted paper in IEEE Network Magazine

Journal ref: IEEE Network, 2023

A Hybrid Architecture for Federated and Centralized Learning

Authors: Ahmet M. Elbir, Sinem Coleri, Anastasios K. Papazafeiropoulos, Pandelis Kourtessis, Symeon Chatzinotas

Abstract: Many of the machine learning tasks rely on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) entailing huge communication overhead. To overcome this, federated learning (FL) has been suggested as a promising tool, wherein the clients send only the model updates to the PS instead of the whole dataset. However, FL demands powerfu… ▽ More Many of the machine learning tasks rely on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) entailing huge communication overhead. To overcome this, federated learning (FL) has been suggested as a promising tool, wherein the clients send only the model updates to the PS instead of the whole dataset. However, FL demands powerful computational resources from the clients. In practice, not all the clients have sufficient computational resources to participate in training. To address this common scenario, we propose a more efficient approach called hybrid federated and centralized learning (HFCL), wherein only the clients with sufficient resources employ FL, while the remaining ones send their datasets to the PS, which computes the model on behalf of them. Then, the model parameters are aggregated at the PS. To improve the efficiency of dataset transmission, we propose two different techniques: i) increased computation-per-client and ii) sequential data transmission. Notably, the HFCL frameworks outperform FL with up to 20\% improvement in the learning accuracy when only half of the clients perform FL while having 50\% less communication overhead than CL since all the clients collaborate on the learning process with their datasets. △ Less

Submitted 1 June, 2022; v1 submitted 7 May, 2021; originally announced May 2021.

Comments: Accepted paper in IEEE Transactions on Cognitive Communications and Networking

Terahertz-Band Joint Ultra-Massive MIMO Radar-Communications: Model-Based and Model-Free Hybrid Beamforming

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, Symeon Chatzinotas

Abstract: Wireless communications and sensing at terahertz (THz) band are increasingly investigated as promising short-range technologies because of the availability of high operational bandwidth at THz. In order to address the extremely high attenuation at THz, ultra-massive multiple-input multiple-output (MIMO) antenna systems have been proposed for THz communications to compensate propagation losses. How… ▽ More Wireless communications and sensing at terahertz (THz) band are increasingly investigated as promising short-range technologies because of the availability of high operational bandwidth at THz. In order to address the extremely high attenuation at THz, ultra-massive multiple-input multiple-output (MIMO) antenna systems have been proposed for THz communications to compensate propagation losses. However, the cost and power associated with fully digital beamformers of these huge antenna arrays are prohibitive. In this paper, we develop wideband hybrid beamformers based on both model-based and model-free techniques for a new group-of-subarrays (GoSA) ultra-massive MIMO structure in low-THz band. Further, driven by the recent developments to save the spectrum, we propose beamformers for a joint ultra-massive MIMO radar-communications system, wherein the base station serves multi-antenna user equipment (RX), and tracks radar targets by generating multiple beams toward both RX and the targets. We formulate the GoSA beamformer design as an optimization problem to provide a trade-off between the unconstrained communications beamformers and the desired radar beamformers. To mitigate the beam split effect at THz band arising from frequency-independent analog beamformers, we propose a phase correction technique to align the beams of multiple subcarriers toward a single physical direction. To further decrease the ultra-massive MIMO computational complexity and enhance robustness, we also implement deep learning solutions to the proposed model-based hybrid beamformers. Numerical experiments demonstrate that both techniques outperform the conventional approaches in terms of spectral efficiency and radar beampatterns, as well as exhibiting less hardware cost and computation time. △ Less

Submitted 29 September, 2021; v1 submitted 27 February, 2021; originally announced March 2021.

Comments: 17pages14figures. Accepted in IEEE Journal of Selected Topics in Signal Processing

Federated Learning for Physical Layer Design

Authors: Ahmet M. Elbir, Anastasios K. Papazafeiropoulos, Symeon Chatzinotas

Abstract: Model-free techniques, such as machine learning (ML), have recently attracted much interest towards the physical layer design, e.g., symbol detection, channel estimation, and beamforming. Most of these ML techniques employ centralized learning (CL) schemes and assume the availability of datasets at a parameter server (PS), demanding the transmission of data from edge devices, such as mobile phones… ▽ More Model-free techniques, such as machine learning (ML), have recently attracted much interest towards the physical layer design, e.g., symbol detection, channel estimation, and beamforming. Most of these ML techniques employ centralized learning (CL) schemes and assume the availability of datasets at a parameter server (PS), demanding the transmission of data from edge devices, such as mobile phones, to the PS. Exploiting the data generated at the edge, federated learning (FL) has been proposed recently as a distributed learning scheme, in which each device computes the model parameters and sends them to the PS for model aggregation while the datasets are kept intact at the edge. Thus, FL is more communication-efficient and privacy-preserving than CL and applicable to the wireless communication scenarios, wherein the data are generated at the edge devices. This article presents the recent advances in FL-based training for physical layer design problems. Compared to CL, the effectiveness of FL is presented in terms of communication overhead with a slight performance loss in the learning accuracy. The design challenges, such as model, data, and hardware complexity, are also discussed in detail along with possible solutions. △ Less

Submitted 6 August, 2021; v1 submitted 23 February, 2021; originally announced February 2021.

Comments: Accepted paper in IEEE Communications Magazine

Federated Dropout Learning for Hybrid Beamforming With Spatial Path Index Modulation In Multi-User mmWave-MIMO Systems

Authors: Ahmet M. Elbir, Sinem Coleri, Kumar Vijay Mishra

Abstract: Millimeter wave multiple-input multiple-output (mmWave-MIMO) systems with small number of radio-frequency (RF) chains have limited multiplexing gain. Spatial path index modulation (SPIM) is helpful in improving this gain by utilizing additional signal bits modulated by the indices of spatial paths. In this paper, we introduce model-based and model-free frameworks for beamformer design in multi-use… ▽ More Millimeter wave multiple-input multiple-output (mmWave-MIMO) systems with small number of radio-frequency (RF) chains have limited multiplexing gain. Spatial path index modulation (SPIM) is helpful in improving this gain by utilizing additional signal bits modulated by the indices of spatial paths. In this paper, we introduce model-based and model-free frameworks for beamformer design in multi-user SPIM-MIMO systems. We first design the beamformers via model-based manifold optimization algorithm. Then, we leverage federated learning (FL) with dropout learning (DL) to train a learning model on the local dataset of users, who estimate the beamformers by feeding the model with their channel data. The DL randomly selects different set of model parameters during training, thereby further reducing the transmission overhead compared to conventional FL. Numerical experiments show that the proposed framework exhibits higher spectral efficiency than the state-of-the-art SPIM-MIMO methods and mmWave-MIMO, which relies on the strongest propagation path. Furthermore, the proposed FL approach provides at least 10 times lower transmission overhead than the centralized learning techniques. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Comments: Accepted paper in 2021 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Toronto, Canada, June 2021

Hybrid Federated and Centralized Learning

Authors: Ahmet M. Elbir, Sinem Coleri, Kumar Vijay Mishra

Abstract: Many of the machine learning (ML) tasks are focused on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) leading to a huge communication overhead. Federated learning (FL) overcomes this issue by allowing the clients to send only the model updates to the PS instead of the whole dataset. In this way, FL brings the learning to edg… ▽ More Many of the machine learning (ML) tasks are focused on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) leading to a huge communication overhead. Federated learning (FL) overcomes this issue by allowing the clients to send only the model updates to the PS instead of the whole dataset. In this way, FL brings the learning to edge level, wherein powerful computational resources are required on the client side. This requirement may not always be satisfied because of diverse computational capabilities of edge devices. We address this through a novel hybrid federated and centralized learning (HFCL) framework to effectively train a learning model by exploiting the computational capability of the clients. In HFCL, only the clients who have sufficient resources employ FL; the remaining clients resort to CL by transmitting their local dataset to PS. This allows all the clients to collaborate on the learning process regardless of their computational resources. We also propose a sequential data transmission approach with HFCL (HFCL-SDT) to reduce the training duration. The proposed HFCL frameworks outperform previously proposed non-hybrid FL (CL) based schemes in terms of learning accuracy (communication overhead) since all the clients collaborate on the learning process with their datasets regardless of their computational resources. △ Less

Submitted 15 February, 2021; v1 submitted 13 November, 2020; originally announced November 2020.

Comments: 5pages4figures. This work has been submitted to the IEEE for publication

Vehicular Networks for Combating a Worldwide Pandemic: Preventing the Spread of COVID-19

Authors: Ahmet M. Elbir, Gokhan Gurbilek, Burak Soner, Anastasios K. Papazafeiropoulos, Pandelis Kourtessis, Sinem Coleri

Abstract: As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Ther… ▽ More As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Therefore, researchers recently started develo** ideas to stop or at least reduce the spread of the pandemic. While there have been some prior works on wireless networks for combating a pandemic scenario, vehicular networks and their potential bottlenecks have not yet been fully examined. Furthermore, the vehicular scenarios can be identified as the locations, where the social distancing is mostly violated. With this motivation, this article provides an extensive discussion on vehicular networking for combating a pandemic. We provide the major applications of vehicular networking for combating COVID-19 in public transportation, in-vehicle diagnosis, border patrol and social distance monitoring. Next, we identify the unique characteristics of the collected data in terms of privacy, flexibility and coverage, then highlight corresponding future directions in privacy preservation, resource allocation, data caching and data routing. We believe that this work paves the way for the development of new products and algorithms that can facilitate the social life and help controlling the spread of the pandemic. △ Less

Submitted 11 October, 2022; v1 submitted 15 October, 2020; originally announced October 2020.

Comments: Accepted Paper in Smart Health

Cognitive Learning-Aided Multi-Antenna Communications

Authors: Ahmet M. Elbir, Kumar Vijay Mishra

Abstract: Cognitive communications have emerged as a promising solution to enhance, adapt, and invent new tools and capabilities that transcend conventional wireless networks. Deep learning (DL) is critical in enabling essential features of cognitive systems because of its fast prediction performance, adaptive behavior, and model-free structure. These features are especially significant for multi-antenna wi… ▽ More Cognitive communications have emerged as a promising solution to enhance, adapt, and invent new tools and capabilities that transcend conventional wireless networks. Deep learning (DL) is critical in enabling essential features of cognitive systems because of its fast prediction performance, adaptive behavior, and model-free structure. These features are especially significant for multi-antenna wireless communications systems, which generate and handle massive data. Multiple antennas may provide multiplexing, diversity, or antenna gains that, respectively, improve the capacity, bit error rate, or the signal-to-interference-plus-noise ratio. In practice, multi-antenna cognitive communications encounter challenges in terms of data complexity and diversity, hardware complexity, and wireless channel dynamics. DL solutions such as federated learning, transfer learning and online learning, tackle these problems at various stages of communications processing, including multi-channel estimation, hybrid beamforming, user localization, and sparse array design. This article provides a synopsis of various DL-based methods to impart cognitive behavior to multi-antenna wireless communications for improved robustness and adaptation to the environmental changes while providing satisfactory spectral efficiency and computation times. We discuss DL design challenges from the perspective of data, learning, and transceiver architectures. In particular, we suggest quantized learning models, data/model parallelization, and distributed learning methods to address the aforementioned challenges. △ Less

Submitted 2 April, 2022; v1 submitted 6 October, 2020; originally announced October 2020.

Comments: Accepted paper in IEEE Wireless Communications Magazine

A Survey of Deep Learning Architectures for Intelligent Reflecting Surfaces

Authors: Ahmet M. Elbir, Kumar Vijay Mishra

Abstract: Intelligent reflecting surfaces (IRSs) have recently received significant attention for wireless communications because it reduces the hardware complexity, physical size, weight, and cost of conventional large arrays. However, deployment of IRS entails dealing with multiple channel links between the base station (BS) and the users. Further, the BS and IRS beamformers require a joint design, wherei… ▽ More Intelligent reflecting surfaces (IRSs) have recently received significant attention for wireless communications because it reduces the hardware complexity, physical size, weight, and cost of conventional large arrays. However, deployment of IRS entails dealing with multiple channel links between the base station (BS) and the users. Further, the BS and IRS beamformers require a joint design, wherein the IRS elements must be rapidly reconfigured. Data-driven techniques, such as deep learning (DL), are critical in addressing these challenges. The lower computation time and model-free nature of DL makes it robust against the data imperfections and environmental changes. At the physical layer, DL has been shown to be effective for IRS signal detection, channel estimation and active/passive beamforming using architectures such as supervised, unsupervised and reinforcement learning. This article provides a synopsis of these techniques for designing DL-based IRS-assisted wireless systems. △ Less

Submitted 21 July, 2022; v1 submitted 5 September, 2020; originally announced September 2020.

Comments: 7 pages and 5 figures. This work has been submitted to the IEEE for publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Federated Learning for Channel Estimation in Conventional and RIS-Assisted Massive MIMO

Authors: Ahmet M. Elbir, Sinem Coleri

Abstract: Machine learning (ML) has attracted a great research interest for physical layer design problems, such as channel estimation, thanks to its low complexity and robustness. Channel estimation via ML requires model training on a dataset, which usually includes the received pilot signals as input and channel data as output. In previous works, model training is mostly done via centralized learning (CL)… ▽ More Machine learning (ML) has attracted a great research interest for physical layer design problems, such as channel estimation, thanks to its low complexity and robustness. Channel estimation via ML requires model training on a dataset, which usually includes the received pilot signals as input and channel data as output. In previous works, model training is mostly done via centralized learning (CL), where the whole training dataset is collected from the users at the base station (BS). This approach introduces huge communication overhead for data collection. In this paper, to address this challenge, we propose a federated learning (FL) framework for channel estimation. We design a convolutional neural network (CNN) trained on the local datasets of the users without sending them to the BS. We develop FL-based channel estimation schemes for both conventional and RIS (intelligent reflecting surface) assisted massive MIMO (multiple-input multiple-output) systems, where a single CNN is trained for two different datasets for both scenarios. We evaluate the performance for noisy and quantized model transmission and show that the proposed approach provides approximately 16 times lower overhead than CL, while maintaining satisfactory performance close to CL. Furthermore, the proposed architecture exhibits lower estimation error than the state-of-the-art ML-based schemes. △ Less

Submitted 15 November, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: Accepted paper in IEEE Transactions on Wireless Communications

A Deep Learning Framework for Hybrid Beamforming Without Instantaneous CSI Feedback

Authors: Ahmet M. Elbir

Abstract: Hybrid beamformer design plays very crucial role in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. Previous works assume the perfect channel state information (CSI) which results heavy feedback overhead. To lower complexity, channel statistics can be utilized such that only infrequent update of the channel information is needed. To reduce the c… ▽ More Hybrid beamformer design plays very crucial role in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. Previous works assume the perfect channel state information (CSI) which results heavy feedback overhead. To lower complexity, channel statistics can be utilized such that only infrequent update of the channel information is needed. To reduce the complexity and provide robustness, in this work, we propose a deep learning (DL) framework to deal with both hybrid beamforming and channel estimation. For this purpose, we introduce three deep convolutional neural network (CNN) architectures. We assume that the base station (BS) has the channel statistics only and feeds the channel covariance matrix into a CNN to obtain the hybrid precoders. At the receiver, two CNNs are employed. The first one is used for channel estimation purposes and the another is employed to design the hybrid combiners. The proposed DL framework does not require the instantaneous feedback of the CSI at the BS. We have shown that the proposed approach has higher spectral efficiency with comparison to the conventional techniques. The trained CNN structures do not need to be re-trained due to the changes in the propagation environment such as the deviations in the number of received paths and the fluctuations in the received path angles up to 4 degrees. Also, the proposed DL framework exhibits at least 10 times lower computational complexity as compared to the conventional optimization-based approaches. △ Less

Submitted 16 August, 2020; v1 submitted 19 June, 2020; originally announced June 2020.

Comments: Accepted in IEEE Transactions on Vehicular Technology

Federated Learning in Vehicular Networks

Authors: Ahmet M. Elbir, Burak Soner, Sinem Coleri, Deniz Gunduz, Mehdi Bennis

Abstract: Machine learning (ML) has recently been adopted in vehicular networks for applications such as autonomous driving, road safety prediction and vehicular object detection, due to its model-free characteristic, allowing adaptive fast response. However, most of these ML applications employ centralized learning (CL), which brings significant overhead for data transmission between the parameter server a… ▽ More Machine learning (ML) has recently been adopted in vehicular networks for applications such as autonomous driving, road safety prediction and vehicular object detection, due to its model-free characteristic, allowing adaptive fast response. However, most of these ML applications employ centralized learning (CL), which brings significant overhead for data transmission between the parameter server and vehicular edge devices. Federated learning (FL) framework has been recently introduced as an efficient tool with the goal of reducing transmission overhead while achieving privacy through the transmission of model updates instead of the whole dataset. In this paper, we investigate the usage of FL over CL in vehicular network applications to develop intelligent transportation systems. We provide a comprehensive analysis on the feasibility of FL for the ML based vehicular applications, as well as investigating object detection by utilizing image-based datasets as a case study. Then, we identify the major challenges from both learning perspective, i.e., data labeling and model training, and from the communications point of view, i.e., data rate, reliability, transmission overhead, privacy and resource management. Finally, we highlight related future research directions for FL in vehicular networks. △ Less

Submitted 16 July, 2022; v1 submitted 2 June, 2020; originally announced June 2020.

Comments: 2022 IEEE International Mediterranean Conference on Communications and Networking (MeditCom)

Federated Learning for Hybrid Beamforming in mm-Wave Massive MIMO

Authors: Ahmet M. Elbir, Sinem Coleri

Abstract: Machine learning for hybrid beamforming has been extensively studied by using centralized machine learning (CML) techniques, which require the training of a global model with a large dataset collected from the users. However, the transmission of the whole dataset between the users and the base station (BS) is computationally prohibitive due to limited communication bandwidth and privacy concerns.… ▽ More Machine learning for hybrid beamforming has been extensively studied by using centralized machine learning (CML) techniques, which require the training of a global model with a large dataset collected from the users. However, the transmission of the whole dataset between the users and the base station (BS) is computationally prohibitive due to limited communication bandwidth and privacy concerns. In this work, we introduce a federated learning (FL) based framework for hybrid beamforming, where the model training is performed at the BS by collecting only the gradients from the users. We design a convolutional neural network, in which the input is the channel data, yielding the analog beamformers at the output. Via numerical simulations, FL is demonstrated to be more tolerant to the imperfections and corruptions in the channel data as well as having less transmission overhead than CML. △ Less

Submitted 22 August, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: Accepted in IEEE Communications Letters

Sparse Array Selection Across Arbitrary Sensor Geometries with Deep Transfer Learning

Authors: Ahmet M. Elbir, Kumar Vijay Mishra

Abstract: Sparse sensor array selection arises in many engineering applications, where it is imperative to obtain maximum spatial resolution from a limited number of array elements. Recent research shows that computational complexity of array selection is reduced by replacing the conventional optimization and greedy search methods with a deep learning network. However, in practice, sufficient and well-calib… ▽ More Sparse sensor array selection arises in many engineering applications, where it is imperative to obtain maximum spatial resolution from a limited number of array elements. Recent research shows that computational complexity of array selection is reduced by replacing the conventional optimization and greedy search methods with a deep learning network. However, in practice, sufficient and well-calibrated labeled training data are unavailable and, more so, for arbitrary array configurations. To address this, we adopt a deep transfer learning (TL) approach, wherein we train a deep convolutional neural network (CNN) with data of a source sensor array for which calibrated data are readily available and reuse this pre-trained CNN for a different, data-insufficient target array geometry to perform sparse array selection. Numerical experiments with uniform rectangular and circular arrays demonstrate enhanced performance of TL-CNN on the target model than the CNN trained with insufficient data from the same model. In particular, our TL framework provides approximately 20% higher sensor selection accuracy and 10% improvement in the direction-of-arrival estimation error. △ Less

Submitted 2 June, 2020; v1 submitted 24 April, 2020; originally announced April 2020.

Comments: Accepted paper in IEEE Transactions on Cognitive Communications and Networking

Deep Channel Learning For Large Intelligent Surfaces Aided mm-Wave Massive MIMO Systems

Authors: Ahmet M. Elbir, A Papazafeiropoulos, P. Kourtessis, S. Chatzinotas

Abstract: This letter presents the first work introducing a deep learning (DL) framework for channel estimation in large intelligent surface (LIS) assisted massive MIMO (multiple-input multiple-output) systems. A twin convolutional neural network (CNN) architecture is designed and it is fed with the received pilot signals to estimate both direct and cascaded channels. In a multi-user scenario, each user has… ▽ More This letter presents the first work introducing a deep learning (DL) framework for channel estimation in large intelligent surface (LIS) assisted massive MIMO (multiple-input multiple-output) systems. A twin convolutional neural network (CNN) architecture is designed and it is fed with the received pilot signals to estimate both direct and cascaded channels. In a multi-user scenario, each user has access to the CNN to estimate its own channel. The performance of the proposed DL approach is evaluated and compared with state-of-the-art DL-based techniques and its superior performance is demonstrated. △ Less

Submitted 13 May, 2020; v1 submitted 29 January, 2020; originally announced January 2020.

Comments: Accepted paper in IEEE Wireless Communications Letters

Journal ref: vol. 9, no. 9, pp. 1447-1451, Sept. 2020

A Family of Deep Learning Architectures for Channel Estimation and Hybrid Beamforming in Multi-Carrier mm-Wave Massive MIMO

Authors: Ahmet M. Elbir, Kumar Vijay Mishra, M. R. Bhavani Shankar, Björn Ottersten

Abstract: Hybrid analog and digital beamforming transceivers are instrumental in addressing the challenge of expensive hardware and high training overheads in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. However, lack of fully digital beamforming in hybrid architectures and short coherence times at mm-Wave impose additional constraints on the channel e… ▽ More Hybrid analog and digital beamforming transceivers are instrumental in addressing the challenge of expensive hardware and high training overheads in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. However, lack of fully digital beamforming in hybrid architectures and short coherence times at mm-Wave impose additional constraints on the channel estimation. Prior works on addressing these challenges have focused largely on narrowband channels wherein optimization-based or greedy algorithms were employed to derive hybrid beamformers. In this paper, we introduce a deep learning (DL) approach for channel estimation and hybrid beamforming for frequency-selective, wideband mm-Wave systems. In particular, we consider a massive MIMO Orthogonal Frequency Division Multiplexing (MIMO-OFDM) system and propose three different DL frameworks comprising convolutional neural networks (CNNs), which accept the raw data of received signal as input and yield channel estimates and the hybrid beamformers at the output. We also introduce both offline and online prediction schemes. Numerical experiments demonstrate that, compared to the current state-of-the-art optimization and DL methods, our approach provides higher spectral efficiency, lesser computational cost and fewer number of pilot signals, and higher tolerance against the deviations in the received pilot data, corrupted channel matrix, and propagation environment. △ Less

Submitted 3 January, 2022; v1 submitted 20 December, 2019; originally announced December 2019.

Comments: Accepted Paper in IEEE Transactions on Cognitive Communications and Networking. arXiv admin note: text overlap with arXiv:1910.14240

DeepMUSIC: Multiple Signal Classification via Deep Learning

Authors: Ahmet M. Elbir

Abstract: This letter introduces a deep learning (DL) framework for direction-of-arrival (DOA) estimation. Previous works in DL context mostly consider a single or two target scenario which is a strong limitation in practice. Hence, in this work, we propose a DL framework for multiple signal classification (DeepMUSIC). We design multiple deep convolutional neural networks (CNNs), each of which is dedicated… ▽ More This letter introduces a deep learning (DL) framework for direction-of-arrival (DOA) estimation. Previous works in DL context mostly consider a single or two target scenario which is a strong limitation in practice. Hence, in this work, we propose a DL framework for multiple signal classification (DeepMUSIC). We design multiple deep convolutional neural networks (CNNs), each of which is dedicated to a subregion of the angular spectrum. In particular, each CNN is fed with the array covariance matrix and it learns the MUSIC spectra of the corresponding angular subregion. We have shown, through simulations, that the proposed DeepMUSIC framework has superior estimation accuracy and exhibits less computational complexity in comparison with both DL and non-DL based techniques. △ Less

Submitted 13 March, 2020; v1 submitted 9 December, 2019; originally announced December 2019.

Comments: To appear in IEEE Sensors Letters, 5 pages, 5 figures

Hybrid Precoding for Multi-User Millimeter Wave Massive MIMO Systems: A Deep Learning Approach

Authors: Ahmet M. Elbir, Anastasios Papazafeiropoulos

Abstract: In multi-user millimeter wave (mmWave) multiple-input-multiple-output (MIMO) systems, hybrid precoding is a crucial task to lower the complexity and cost while achieving a sufficient sum-rate. Previous works on hybrid precoding were usually based on optimization or greedy approaches. These methods either provide higher complexity or have sub-optimum performance. Moreover, the performance of these… ▽ More In multi-user millimeter wave (mmWave) multiple-input-multiple-output (MIMO) systems, hybrid precoding is a crucial task to lower the complexity and cost while achieving a sufficient sum-rate. Previous works on hybrid precoding were usually based on optimization or greedy approaches. These methods either provide higher complexity or have sub-optimum performance. Moreover, the performance of these methods mostly relies on the quality of the channel data. In this work, we propose a deep learning (DL) framework to improve the performance and provide less computation time as compared to conventional techniques. In fact, we design a convolutional neural network for MIMO (CNN-MIMO) that accepts as input an imperfect channel matrix and gives the analog precoder and combiners at the output. The procedure includes two main stages. First, we develop an exhaustive search algorithm to select the analog precoder and combiners from a predefined codebook maximizing the achievable sum-rate. Then, the selected precoder and combiners are used as output labels in the training stage of CNN-MIMO where the input-output pairs are obtained. We evaluate the performance of the proposed method through numerous and extensive simulations and show that the proposed DL framework outperforms conventional techniques. Overall, CNN-MIMO provides a robust hybrid precoding scheme in the presence of imperfections regarding the channel matrix. On top of this, the proposed approach exhibits less computation time with comparison to the optimization and codebook based approaches. △ Less

Submitted 11 November, 2019; originally announced November 2019.

Comments: Accepted paper in IEEE Transactions on Vehicular Technology, Oct 2019