-
White Paper on Radio Channel Modeling and Prediction to Support Future Environment-aware Wireless Communication Systems
Authors:
Mate Boban,
Vittorio Degli-Esposti
Abstract:
COST INTERACT working group (WG)1 aims at increasing the theoretical and experimental understanding of radio propagation and channels in environments of interest and at deriving models for design, simulation, planning and operation of future wireless systems. Wide frequency ranges from sub-GHz to terahertz (THz), potentially high mobility, diverse and highly cluttered environments, dense networks,…
▽ More
COST INTERACT working group (WG)1 aims at increasing the theoretical and experimental understanding of radio propagation and channels in environments of interest and at deriving models for design, simulation, planning and operation of future wireless systems. Wide frequency ranges from sub-GHz to terahertz (THz), potentially high mobility, diverse and highly cluttered environments, dense networks, massive antenna systems, and the use of intelligent surfaces, are some of the challenges for radio channel measurements and modeling for next generation systems. As indicated in [1], with increased number of use cases (e.g., those identified by one6G [2] and shown in Fig. 1) to be supported and a larger number of frequency bands, a paradigm shift in channel measurements and modeling will be required. To address the particular challenges that come with such a paradigm shift, WG1 started the work on relevant topics, ranging from channel sounder design, metrology and measurement methodologies, measurements, modeling, and systematic dataset collection and analysis. In addition to the core activities of WG1, based on the strong interest of the participants, two sub-working groups (subWGs) have been initiated as part of WG1: i) subWG1.1 on millimeter-wave (mmWave) and THz sounding (subWG THz) and ii) subWG1.2 on propagation aspects related to reconfigurable intelligent surfaces (RIS) (subWG RIS). This white paper has two main goals: i) it summarizes the state-of-theart in radio channel measurement and modeling and the key challenges that the scientific community will have to face over the next years to support the development of 6G networks, as identified by WG1 and its subWGs; and ii) it charts the main directions for the work of WG1 and subWGs for the remainder of COST INTERACT duration (i.e., until October 2025).
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
Reradiation and Scattering from a Reconfigurable Intelligent Surface: A General Macroscopic Model
Authors:
V. Degli-Esposti,
E. M. Vitucci,
M. Di Renzo,
S. Tretyakov
Abstract:
Reconfigurable Intelligent Surfaces (RISs) have attracted major attention in the last few years, thanks to their useful characteristics. An RIS is a nearly passive thin surface that can dynamically change the reradiated field, and can therefore realize anomalous reflection, refraction, focalization, or other wave transformations for engineering the radio propagation environment or realizing novel…
▽ More
Reconfigurable Intelligent Surfaces (RISs) have attracted major attention in the last few years, thanks to their useful characteristics. An RIS is a nearly passive thin surface that can dynamically change the reradiated field, and can therefore realize anomalous reflection, refraction, focalization, or other wave transformations for engineering the radio propagation environment or realizing novel surface-type antennas. Evaluating the performance and optimizing the deployment of RISs in wireless networks need physically consistent frameworks that account for the electromagnetic characteristics of dynamic metasurfaces. In this paper, we introduce a general macroscopic model for evaluating the scattering from an RIS. The proposed method decomposes the wave reradiated from an RIS into multiple scattering contributions and is aimed at being embedded into ray-based models. Since state-of-the-art ray-based models can already efficiently simulate specular wave reflection, diffraction, and diffuse scattering, but not anomalous reradiation, we enhance them with an approach based on Huygens' principle and propose two possible implementations for it. Multiple reradiation modes can be modeled through the proposed approach, using the power conservation principle. We validate the accuracy of the proposed model by benchmarking it against several case studies available in the literature, which are based on analytical models, full-wave simulations, and measurements.
△ Less
Submitted 5 February, 2022; v1 submitted 27 July, 2021;
originally announced July 2021.
-
Characterizing the UAV-to-Machine UWB Radio Channel in Smart Factories
Authors:
Vasilii Semkin,
Enrico M. Vitucci,
Franco Fuschini,
Marina Barbiroli,
Vittorio Degli-Esposti,
Claude Oestges
Abstract:
In this work, the results of Ultra-Wideband air-to-ground measurements carried out in a real-world factory environment are presented and discussed. With intelligent in-dustrial deployments in mind, we envision a scenario where the Unmanned Aerial Vehicle can be used as a supplementary tool for factory operation, optimization and control. Measurements address narrow band and wide band characterizat…
▽ More
In this work, the results of Ultra-Wideband air-to-ground measurements carried out in a real-world factory environment are presented and discussed. With intelligent in-dustrial deployments in mind, we envision a scenario where the Unmanned Aerial Vehicle can be used as a supplementary tool for factory operation, optimization and control. Measurements address narrow band and wide band characterization of the wireless radio channel, and can be used for link budget calculation, interference studies and time dispersion assessment in real factories, without the usual limitation for both radio terminals to be close to ground. The measurements are performed at different locations and different heights over the 3.1-5.3 GHz band. Some fundamental propagation parameters values are determined vs. distance, height and propagation conditions. The measurements are complemented with, and compared to, conventional ground-to-ground measurements with the same setup. The conducted measurement campaign gives an insight for realizing wireless applications in smart connected factories, including UAV-assisted applications.
△ Less
Submitted 19 April, 2021;
originally announced April 2021.
-
An UAV-based Experimental Setup for Propagation Characterization in Urban Environment
Authors:
Franco Fuschini,
Marina Barbiroli,
Enrico M. Vitucci,
Vasilii Semkin,
Claude Oestges,
Bruno Strano,
Vittorio Degli-Esposti
Abstract:
A measurement setup made of millimeter-wave and ultra wideband transceivers mounted on both a customized UAV and a ground station for full 3D wireless propagation analysis is described in this work. The developed system represents a flexible solution for the characterization of wireless channels and especially of urban propagation, as the drone might be easily located almost anywhere from ground l…
▽ More
A measurement setup made of millimeter-wave and ultra wideband transceivers mounted on both a customized UAV and a ground station for full 3D wireless propagation analysis is described in this work. The developed system represents a flexible solution for the characterization of wireless channels and especially of urban propagation, as the drone might be easily located almost anywhere from ground level to the buildings rooftop and beyond. The double directional properties of the channel can be achieved by rotating directive antennas at the link ends. Other possible applications in urban contexts include above ground level propagation, outdoor-to-indoor penetration, line-of-sight to non-line-of-sight transition, scattering from buildings and air-to-ground channel characterization for UAV-assisted wireless communications.
△ Less
Submitted 13 May, 2021; v1 submitted 24 January, 2021;
originally announced March 2021.