-
Calibration and Validation of a Phase-Field Model of Brittle Fracture within the Damage Mechanics Challenge
Authors:
Jonas Heinzmann,
Pietro Carrara,
Chenyi Luo,
Manav Manav,
Akanksha Mishra,
Sindhu Nagaraja,
Hamza Oudich,
Francesco Vicentini,
Laura De Lorenzis
Abstract:
In the context of the Damage Mechanics Challenge, we adopt a phase-field model of brittle fracture to blindly predict the behavior up to failure of a notched three-point-bending specimen loaded under mixed-mode conditions. The beam is additively manufactured using a geo-architected gypsum based on the combination of bassanite and a water-based binder. The calibration of the material parameters inv…
▽ More
In the context of the Damage Mechanics Challenge, we adopt a phase-field model of brittle fracture to blindly predict the behavior up to failure of a notched three-point-bending specimen loaded under mixed-mode conditions. The beam is additively manufactured using a geo-architected gypsum based on the combination of bassanite and a water-based binder. The calibration of the material parameters involved in the model is based on a set of available independent experimental tests and on a two-stage procedure. In the first stage an estimate of most of the elastic parameters is obtained, whereas the remaining parameters are optimized in the second stage so as to minimize the discrepancy between the numerical predictions and a set of experimental results on notched three-point-bending beams. The good agreement between numerical predictions and experimental results in terms of load-displacement curves and crack paths demonstrates the predictive ability of the model and the reliability of the calibration procedure.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
A review on data-driven constitutive laws for solids
Authors:
Jan Niklas Fuhg,
Govinda Anantha Padmanabha,
Nikolaos Bouklas,
Bahador Bahmani,
WaiChing Sun,
Nikolaos N. Vlassis,
Moritz Flaschel,
Pietro Carrara,
Laura De Lorenzis
Abstract:
This review article highlights state-of-the-art data-driven techniques to discover, encode, surrogate, or emulate constitutive laws that describe the path-independent and path-dependent response of solids. Our objective is to provide an organized taxonomy to a large spectrum of methodologies developed in the past decades and to discuss the benefits and drawbacks of the various techniques for inter…
▽ More
This review article highlights state-of-the-art data-driven techniques to discover, encode, surrogate, or emulate constitutive laws that describe the path-independent and path-dependent response of solids. Our objective is to provide an organized taxonomy to a large spectrum of methodologies developed in the past decades and to discuss the benefits and drawbacks of the various techniques for interpreting and forecasting mechanics behavior across different scales. Distinguishing between machine-learning-based and model-free methods, we further categorize approaches based on their interpretability and on their learning process/type of required data, while discussing the key problems of generalization and trustworthiness. We attempt to provide a road map of how these can be reconciled in a data-availability-aware context. We also touch upon relevant aspects such as data sampling techniques, design of experiments, verification, and validation.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Reduced and All-at-Once Approaches for Model Calibration and Discovery in Computational Solid Mechanics
Authors:
Ulrich Römer,
Stefan Hartmann,
Jendrik-Alexander Tröger,
David Anton,
Henning Wessels,
Moritz Flaschel,
Laura De Lorenzis
Abstract:
In the framework of solid mechanics, the task of deriving material parameters from experimental data has recently re-emerged with the progress in full-field measurement capabilities and the renewed advances of machine learning. In this context, new methods such as the virtual fields method and physics-informed neural networks have been developed as alternatives to the already established least-squ…
▽ More
In the framework of solid mechanics, the task of deriving material parameters from experimental data has recently re-emerged with the progress in full-field measurement capabilities and the renewed advances of machine learning. In this context, new methods such as the virtual fields method and physics-informed neural networks have been developed as alternatives to the already established least-squares and finite element-based approaches. Moreover, model discovery problems are starting to emerge and can also be addressed in a parameter estimation framework. These developments call for a new unified perspective, which is able to cover both traditional parameter estimation methods and novel approaches in which the state variables or the model structure itself are inferred as well. Adopting concepts discussed in the inverse problems community, we distinguish between all-at-once and reduced approaches. With this general framework, we are able to structure a large portion of the literature on parameter estimation in computational mechanics - and we can identify combinations that have not yet been addressed, two of which are proposed in this paper. We also discuss statistical approaches to quantify the uncertainty related to the estimated parameters, and we propose a novel two-step procedure for identification of complex material models based on both frequentist and Bayesian principles. Finally, we illustrate and compare several of the aforementioned methods with mechanical benchmarks based on synthetic and real data.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
An adaptive acceleration scheme for phase-field fatigue computations
Authors:
Jonas Heinzmann,
Pietro Carrara,
Marreddy Ambati,
Amir Mohammad Mirzaei,
Laura De Lorenzis
Abstract:
Phase-field models of fatigue are capable of reproducing the main phenomenology of fatigue behavior. However, phase-field computations in the high-cycle fatigue regime are prohibitively expensive, due to the need to resolve spatially the small length scale inherent to phase-field models and temporally the loading history for several millions of cycles. As a remedy, we propose a fully adaptive acce…
▽ More
Phase-field models of fatigue are capable of reproducing the main phenomenology of fatigue behavior. However, phase-field computations in the high-cycle fatigue regime are prohibitively expensive, due to the need to resolve spatially the small length scale inherent to phase-field models and temporally the loading history for several millions of cycles. As a remedy, we propose a fully adaptive acceleration scheme based on the cycle jump technique, where the cycle-by-cycle resolution of an appropriately determined number of cycles is skipped while predicting the local system evolution during the jump. The novelty of our approach is a cycle-jump criterion to determine the appropriate cycle-jump size based on a target increment of a global variable which monitors the advancement of fatigue. We propose the definition and meaning of this variable for three general stages of the fatigue life. In comparison to existing acceleration techniques, our approach needs no parameters and bounds for the cycle-jump size, and it works independently of the material, specimen or loading conditions. Since one of the monitoring variables is the fatigue crack length, we introduce an accurate, flexible and efficient method for its computation, which overcomes the issues of conventional crack tip tracking algorithms and enables the consideration of several cracks evolving at the same time. The performance of the proposed acceleration scheme is demonstrated with representative numerical examples, which show a speedup reaching four orders of magnitude in the high-cycle fatigue regime with consistently high accuracy.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Enhanced Floating Isogeometric Analysis
Authors:
Helge C. Hille,
Siddhant Kumar,
Laura De Lorenzis
Abstract:
The numerical simulation of additive manufacturing techniques promises the acceleration of costly experimental procedures to identify suitable process parameters. We recently proposed Floating Isogeometric Analysis (FLIGA), a new computational solid mechanics approach, which is mesh distortion-free in one characteristic spatial direction. FLIGA emanates from Isogeometric Analysis and its key novel…
▽ More
The numerical simulation of additive manufacturing techniques promises the acceleration of costly experimental procedures to identify suitable process parameters. We recently proposed Floating Isogeometric Analysis (FLIGA), a new computational solid mechanics approach, which is mesh distortion-free in one characteristic spatial direction. FLIGA emanates from Isogeometric Analysis and its key novel aspect is the concept of deformation-dependent "floating" of individual B-spline basis functions along one parametric axis of the mesh. Our previous work showed that FLIGA not only overcomes the problem of mesh distortion associated to this direction, but is also ideally compatible with material point integration and enjoys a stability similar to that of conventional Lagrangian mesh-based methods. These features make the method applicable to the simulation of large deformation problems with history-dependent constitutive behavior, such as additive manufacturing based on polymer extrusion. In this work, we enhance the first version of FLIGA by (i) a novel quadrature scheme which further improves the robustness against mesh distortion, (ii) a procedure to automatically regulate floating of the basis functions (as opposed to the manual procedure of the first version), and (iii) an adaptive refinement strategy. We demonstrate the performance of enhanced FLIGA on relevant numerical examples including a selection of viscoelastic extrusion problems.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Automated discovery of interpretable hyperelastic material models for human brain tissue with EUCLID
Authors:
Moritz Flaschel,
Huitian Yu,
Nina Reiter,
Jan Hinrichsen,
Silvia Budday,
Paul Steinmann,
Siddhant Kumar,
Laura De Lorenzis
Abstract:
We propose an automated computational algorithm for simultaneous model selection and parameter identification for the hyperelastic mechanical characterization of human brain tissue. Following the motive of the recently proposed computational framework EUCLID (Efficient Unsupervised Constitutive Law Identitication and Discovery) and in contrast to conventional parameter calibration methods, we cons…
▽ More
We propose an automated computational algorithm for simultaneous model selection and parameter identification for the hyperelastic mechanical characterization of human brain tissue. Following the motive of the recently proposed computational framework EUCLID (Efficient Unsupervised Constitutive Law Identitication and Discovery) and in contrast to conventional parameter calibration methods, we construct an extensive set of candidate hyperelastic models, i.e., a model library including popular models known from the literature, and develop a computational strategy for automatically selecting a model from the library that conforms to the available experimental data while being represented as an interpretable symbolic mathematical expression. This computational strategy comprises sparse regression, i.e., a regression problem that is regularized by a sparsity promoting penalty term that filters out irrelevant models from the model library, and a clustering method for grou** together highly correlated and thus redundant features in the model library. The model selection procedure is driven by labelled data pairs stemming from mechanical tests under different deformation modes, i.e., uniaxial compression/tension and simple torsion, and can thus be interpreted as a supervised counterpart to the originally proposed EUCLID that is informed by full-field displacement data and global reaction forces. The proposed method is verified on synthetical data with artificial noise and validated on experimental data acquired through mechanical tests of human brain specimens, proving that the method is capable of discovering hyperelastic models that exhibit both high fitting accuracy to the data as well as concise and thus interpretable mathematical representations.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Automated discovery of generalized standard material models with EUCLID
Authors:
Moritz Flaschel,
Siddhant Kumar,
Laura De Lorenzis
Abstract:
We extend the scope of our approach for unsupervised automated discovery of material laws (EUCLID) to the case of a material belonging to an unknown class of behavior. To this end, we leverage the theory of generalized standard materials, which encompasses a plethora of important constitutive classes. We show that, based only on full-field kinematic measurements and net reaction forces, EUCLID is…
▽ More
We extend the scope of our approach for unsupervised automated discovery of material laws (EUCLID) to the case of a material belonging to an unknown class of behavior. To this end, we leverage the theory of generalized standard materials, which encompasses a plethora of important constitutive classes. We show that, based only on full-field kinematic measurements and net reaction forces, EUCLID is able to automatically discover the two scalar thermodynamic potentials, namely, the Helmholtz free energy and the dissipation potential, which completely define the behavior of generalized standard materials. The a priori enforced constraint of convexity on these potentials guarantees by construction stability and thermodynamic consistency of the discovered model; balance of linear momentum acts as a fundamental constraint to replace the availability of stress-strain labeled pairs; sparsity promoting regularization enables the automatic selection of a small subset from a possibly large number of candidate model features and thus leads to a parsimonious, i.e., simple and interpretable, model. Importantly, since model features go hand in hand with the correspondingly active internal variables, sparse regression automatically induces a parsimonious selection of the few internal variables needed for an accurate but simple description of the material behavior. A fully automatic procedure leads to the selection of the hyperparameter controlling the weight of the sparsity promoting regularization term, in order to strike a user-defined balance between model accuracy and simplicity. By testing the method on synthetic data including artificial noise, we demonstrate that EUCLID is able to automatically discover the true hidden material model from a large catalog of constitutive classes, including elasticity, viscoelasticity, elastoplasticity, viscoplasticity, isotropic and kinematic hardening.
△ Less
Submitted 26 October, 2022;
originally announced November 2022.
-
NN-EUCLID: deep-learning hyperelasticity without stress data
Authors:
Prakash Thakolkaran,
Akshay Joshi,
Yiwen Zheng,
Moritz Flaschel,
Laura De Lorenzis,
Siddhant Kumar
Abstract:
We propose a new approach for unsupervised learning of hyperelastic constitutive laws with physics-consistent deep neural networks. In contrast to supervised learning, which assumes the availability of stress-strain pairs, the approach only uses realistically measurable full-field displacement and global reaction force data, thus it lies within the scope of our recent framework for Efficient Unsup…
▽ More
We propose a new approach for unsupervised learning of hyperelastic constitutive laws with physics-consistent deep neural networks. In contrast to supervised learning, which assumes the availability of stress-strain pairs, the approach only uses realistically measurable full-field displacement and global reaction force data, thus it lies within the scope of our recent framework for Efficient Unsupervised Constitutive Law Identification and Discovery (EUCLID) and we denote it as NN-EUCLID. The absence of stress labels is compensated for by leveraging a physics-motivated loss function based on the conservation of linear momentum to guide the learning process. The constitutive model is based on input-convex neural networks, which are capable of learning a function that is convex with respect to its inputs. By employing a specially designed neural network architecture, multiple physical and thermodynamic constraints for hyperelastic constitutive laws, such as material frame indifference, (poly-)convexity, and stress-free reference configuration are automatically satisfied. We demonstrate the ability of the approach to accurately learn several hidden isotropic and anisotropic hyperelastic constitutive laws - including e.g., Mooney-Rivlin, Arruda-Boyce, Ogden, and Holzapfel models - without using stress data. For anisotropic hyperelasticity, the unknown anisotropic fiber directions are automatically discovered jointly with the constitutive model. The neural network-based constitutive models show good generalization capability beyond the strain states observed during training and are readily deployable in a general finite element framework for simulating complex mechanical boundary value problems with good accuracy.
△ Less
Submitted 10 October, 2022; v1 submitted 4 May, 2022;
originally announced May 2022.
-
The isogeometric collocated contact surface approach
Authors:
Frederik Fahrendorf,
Laura De Lorenzis
Abstract:
We propose a frictionless contact formulation for isogeometric analysis, which combines a collocated formulation for the contact surfaces with a standard Galerkin treatment of the bulk. We denote it as isogeometric Collocated Contact Surface (CCS) formulation. The approach is based on a simple pointwise enforcement of the contact constraints, performed in this study with the penalty method. Unlike…
▽ More
We propose a frictionless contact formulation for isogeometric analysis, which combines a collocated formulation for the contact surfaces with a standard Galerkin treatment of the bulk. We denote it as isogeometric Collocated Contact Surface (CCS) formulation. The approach is based on a simple pointwise enforcement of the contact constraints, performed in this study with the penalty method. Unlike pointwise (node-to-surface or point-to-surface) contact algorithms in the Galerkin framework, the CCS formulation passes the contact patch test to machine precision by naturally exploiting the favorable properties of isogeometric collocation. Compared with approaches where the discretization of both bulk and contact surfaces is based on collocation, the CCS approach does not need enhancements to remove oscillations for highly non-uniform meshes. With respect to integral contact approaches, the CCS algorithm is less expensive, easier to code and can be added to a pre-existing isogeometric analysis code with minimal effort. Numerical examples in both small and large deformations are investigated to compare the CCS approach with some available contact formulations and to demonstrate its accuracy.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Bayesian-EUCLID: discovering hyperelastic material laws with uncertainties
Authors:
Akshay Joshi,
Prakash Thakolkaran,
Yiwen Zheng,
Maxime Escande,
Moritz Flaschel,
Laura De Lorenzis,
Siddhant Kumar
Abstract:
Within the scope of our recent approach for Efficient Unsupervised Constitutive Law Identification and Discovery (EUCLID), we propose an unsupervised Bayesian learning framework for discovery of parsimonious and interpretable constitutive laws with quantifiable uncertainties. As in deterministic EUCLID, we do not resort to stress data, but only to realistically measurable full-field displacement a…
▽ More
Within the scope of our recent approach for Efficient Unsupervised Constitutive Law Identification and Discovery (EUCLID), we propose an unsupervised Bayesian learning framework for discovery of parsimonious and interpretable constitutive laws with quantifiable uncertainties. As in deterministic EUCLID, we do not resort to stress data, but only to realistically measurable full-field displacement and global reaction force data; as opposed to calibration of an a priori assumed model, we start with a constitutive model ansatz based on a large catalog of candidate functional features; we leverage domain knowledge by including features based on existing, both physics-based and phenomenological, constitutive models. In the new Bayesian-EUCLID approach, we use a hierarchical Bayesian model with sparsity-promoting priors and Monte Carlo sampling to efficiently solve the parsimonious model selection task and discover physically consistent constitutive equations in the form of multivariate multi-modal probabilistic distributions. We demonstrate the ability to accurately and efficiently recover isotropic and anisotropic hyperelastic models like the Neo-Hookean, Isihara, Gent-Thomas, Arruda-Boyce, Ogden, and Holzapfel models in both elastostatics and elastodynamics. The discovered constitutive models are reliable under both epistemic uncertainties - i.e. uncertainties on the true features of the constitutive catalog - and aleatoric uncertainties - which arise from the noise in the displacement field data, and are automatically estimated by the hierarchical Bayesian model.
△ Less
Submitted 20 October, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Discovering plasticity models without stress data
Authors:
Moritz Flaschel,
Siddhant Kumar,
Laura De Lorenzis
Abstract:
We propose a new approach for data-driven automated discovery of material laws, which we call EUCLID (Efficient Unsupervised Constitutive Law Identification and Discovery), and we apply it here to the discovery of plasticity models, including arbitrarily shaped yield surfaces and isotropic and/or kinematic hardening laws. The approach is unsupervised, i.e., it requires no stress data but only full…
▽ More
We propose a new approach for data-driven automated discovery of material laws, which we call EUCLID (Efficient Unsupervised Constitutive Law Identification and Discovery), and we apply it here to the discovery of plasticity models, including arbitrarily shaped yield surfaces and isotropic and/or kinematic hardening laws. The approach is unsupervised, i.e., it requires no stress data but only full-field displacement and global force data; it delivers interpretable models, i.e., models that are embodied by parsimonious mathematical expressions discovered through sparse regression of a potentially large catalogue of candidate functions; it is one-shot, i.e., discovery only needs one experiment. The material model library is constructed by expanding the yield function with a Fourier series, whereas isotropic and kinematic hardening are introduced by assuming a yield function dependency on internal history variables that evolve with the plastic deformation. For selecting the most relevant Fourier modes and identifying the hardening behavior, EUCLID employs physics knowledge, i.e., the optimization problem that governs the discovery enforces the equilibrium constraints in the bulk and at the loaded boundary of the domain. Sparsity promoting regularization is deployed to generate a set of solutions out of which a solution with low cost and high parsimony is automatically selected. Through virtual experiments, we demonstrate the ability of EUCLID to accurately discover several plastic yield surfaces and hardening mechanisms of different complexity.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Floating Isogeometric Analysis
Authors:
Helge C. Hille,
Siddhant Kumar,
Laura De Lorenzis
Abstract:
We propose Floating Isogeometric Analysis (FLIGA), which extends the concepts of IGA to Lagrangian extreme deformation analysis. The method is based on a novel tensor-product construction of B-Splines for the update of the basis functions in one direction of the parametric space. With basis functions 'floating' deformation-dependently in this direction, mesh distortion is overcome for problems in…
▽ More
We propose Floating Isogeometric Analysis (FLIGA), which extends the concepts of IGA to Lagrangian extreme deformation analysis. The method is based on a novel tensor-product construction of B-Splines for the update of the basis functions in one direction of the parametric space. With basis functions 'floating' deformation-dependently in this direction, mesh distortion is overcome for problems in which extreme deformations occur predominantly along the associated (possibly curved) physical axis. In doing so, we preserve the numerical advantages of splines over many meshless basis functions, while avoiding remeshing. We employ material point integration for numerical quadrature attributing a Lagrangian character to our technique. The paper introduces the method and reviews the fundamental properties of the FLIGA basis functions, including a numerical patch test. The performance of FLIGA is then numerically investigated on the benchmark of Newtonian and viscoelastic Taylor-Couette flow. Finally, we simulate a viscoelastic extrusion-based additive manufacturing process, which served as the original motivation for the new approach.
△ Less
Submitted 22 October, 2021; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Second-order phase-field formulations for anisotropic brittle fracture
Authors:
Tymofiy Gerasimov,
Laura De Lorenzis
Abstract:
We address brittle fracture in anisotropic materials featuring two-fold and four-fold symmetric fracture toughness. For these two classes, we develop two variational phase-field models based on the family of regularizations proposed by Focardi (Focardi, M. On the variational approximation of free-discontinuity problems in the vectorial case. Math. Models Methods App. Sci., 11:663{684, 2001), for w…
▽ More
We address brittle fracture in anisotropic materials featuring two-fold and four-fold symmetric fracture toughness. For these two classes, we develop two variational phase-field models based on the family of regularizations proposed by Focardi (Focardi, M. On the variational approximation of free-discontinuity problems in the vectorial case. Math. Models Methods App. Sci., 11:663{684, 2001), for which Gamma-convergence results hold. Since both models are of second order, as opposed to the previously available fourth-order models for four-fold symmetric fracture toughness, they do not require basis functions of C1-continuity nor mixed variational principles for finite element discretization. For the four-fold symmetric formulation we show that the standard quadratic degradation function is unsuitable and devise a procedure to derive a suitable one. The performance of the new models is assessed via several numerical examples that simulate anisotropic fracture under anti-plane shear loading. For both formulations at fixed displacements (i.e. within an alternate minimization procedure), we also provide some existence and uniqueness results for the phase-field solution.
△ Less
Submitted 6 October, 2021; v1 submitted 28 July, 2021;
originally announced July 2021.
-
Unsupervised discovery of interpretable hyperelastic constitutive laws
Authors:
Moritz Flaschel,
Siddhant Kumar,
Laura De Lorenzis
Abstract:
We propose a new approach for data-driven automated discovery of isotropic hyperelastic constitutive laws. The approach is unsupervised, i.e., it requires no stress data but only displacement and global force data, which are realistically available through mechanical testing and digital image correlation techniques; it delivers interpretable models, i.e., models that are embodied by parsimonious m…
▽ More
We propose a new approach for data-driven automated discovery of isotropic hyperelastic constitutive laws. The approach is unsupervised, i.e., it requires no stress data but only displacement and global force data, which are realistically available through mechanical testing and digital image correlation techniques; it delivers interpretable models, i.e., models that are embodied by parsimonious mathematical expressions discovered through sparse regression of a large catalogue of candidate functions; it is one-shot, i.e., discovery only needs one experiment - but can use more if available. The problem of unsupervised discovery is solved by enforcing equilibrium constraints in the bulk and at the loaded boundary of the domain. Sparsity of the solution is achieved by l_p regularization combined with thresholding, which calls for a non-linear optimization scheme. The ensuing fully automated algorithm leverages physics-based constraints for the automatic determination of the penalty parameter in the regularization term. Using numerically generated data including artificial noise, we demonstrate the ability of the approach to accurately discover five hyperelastic models of different complexity. We also show that, if a "true" feature is missing in the function library, the proposed approach is able to surrogate it in such a way that the actual response is still accurately predicted.
△ Less
Submitted 6 April, 2021; v1 submitted 26 October, 2020;
originally announced October 2020.
-
Data-driven fracture mechanics
Authors:
Pietro Carrara,
Laura De Lorenzis,
Laurent Stainier,
Michael Ortiz
Abstract:
We present a new data-driven paradigm for variational brittle fracture mechanics. The fracture-related material modeling assumptions are removed and the governing equations stemming from variational principles are combined with a set of discrete data points, leading to a model-free data-driven method of solution. The solution at a given load step is identified as the point within the data set that…
▽ More
We present a new data-driven paradigm for variational brittle fracture mechanics. The fracture-related material modeling assumptions are removed and the governing equations stemming from variational principles are combined with a set of discrete data points, leading to a model-free data-driven method of solution. The solution at a given load step is identified as the point within the data set that best satisfies either the Kuhn-Tucker conditions stemming from the variational fracture problem or global minimization of a suitable energy functional, leading to data-driven counterparts of both the local and the global minimization approaches of variational fracture mechanics. Both formulations are tested on different test configurations with and without noise and for Griffith and R-curve type fracture behavior.
△ Less
Submitted 10 September, 2020; v1 submitted 3 June, 2020;
originally announced June 2020.
-
Stochastic phase-field modeling of brittle fracture: computing multiple crack patterns and their probabilities
Authors:
Tymofiy Gerasimov,
Ulrich Römer,
Jaroslav Vondřejc,
Hermann G. Matthies,
Laura De Lorenzis
Abstract:
In variational phase-field modeling of brittle fracture, the functional to be minimized is not convex, so that the necessary stationarity conditions of the functional may admit multiple solutions. The solution obtained in an actual computation is typically one out of several local minimizers. Evidence of multiple solutions induced by small perturbations of numerical or physical parameters was occa…
▽ More
In variational phase-field modeling of brittle fracture, the functional to be minimized is not convex, so that the necessary stationarity conditions of the functional may admit multiple solutions. The solution obtained in an actual computation is typically one out of several local minimizers. Evidence of multiple solutions induced by small perturbations of numerical or physical parameters was occasionally recorded but not explicitly investigated in the literature. In this work, we focus on this issue and advocate a paradigm shift, away from the search for one particular solution towards the simultaneous description of all possible solutions (local minimizers), along with the probabilities of their occurrence. Inspired by recent approaches advocating measure-valued solutions (Young measures as well as their generalization to statistical solutions) and their numerical approximations in fluid mechanics, we propose the stochastic relaxation of the variational brittle fracture problem through random perturbations of the functional. We introduce the concept of stochastic solution, with the main advantage that point-to-point correlations of the crack phase fields in the underlying domain can be captured. These stochastic solutions are represented by random fields or random variables with values in the classical deterministic solution spaces. In the numerical experiments, we use a simple Monte Carlo approach to compute approximations to such stochastic solutions. The final result of the computation is not a single crack pattern, but rather several possible crack patterns and their probabilities. The stochastic solution framework using evolving random fields allows additionally the interesting possibility of conditioning the probabilities of further crack paths on intermediate crack patterns.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Phase-field modeling of brittle fracture with multi-level hp-FEM and the finite cell method
Authors:
Sindhu Nagaraja,
Mohamed Elhaddad,
Marreddy Ambati,
Stefan Kollmannsberger,
Laura De Lorenzis,
Ernst Rank
Abstract:
The difficulties in dealing with discontinuities related to a sharp crack are overcome in the phase-field approach for fracture by modeling the crack as a diffusive object being described by a continuous field having high gradients. The discrete crack limit case is approached for a small length-scale parameter that controls the width of the transition region between the fully broken and the undama…
▽ More
The difficulties in dealing with discontinuities related to a sharp crack are overcome in the phase-field approach for fracture by modeling the crack as a diffusive object being described by a continuous field having high gradients. The discrete crack limit case is approached for a small length-scale parameter that controls the width of the transition region between the fully broken and the undamaged phases. From a computational standpoint, this necessitates fine meshes, at least locally, in order to accurately resolve the phase-field profile. In the classical approach, phase-field models are computed on a fixed mesh that is a priori refined in the areas where the crack is expected to propagate. This on the other hand curbs the convenience of using phase-field models for unknown crack paths and its ability to handle complex crack propagation patterns. In this work, we overcome this issue by employing the multi-level hp-refinement technique that enables a dynamically changing mesh which in turn allows the refinement to remain local at singularities and high gradients without problems of hanging nodes. Yet, in case of complex geometries, mesh generation and in particular local refinement becomes non-trivial. We address this issue by integrating a two-dimensional phase-field framework for brittle fracture with the finite cell method (FCM). The FCM based on high-order finite elements is a non-geometry-conforming discretization technique wherein the physical domain is embedded into a larger fictitious domain of simple geometry that can be easily discretized. This facilitates mesh generation for complex geometries and supports local refinement. Numerical examples including a comparison to a validation experiment illustrate the applicability of the multi-level hp-refinement and the FCM in the context of phase-field simulations.
△ Less
Submitted 23 April, 2018;
originally announced April 2018.
-
A segmentation-free isogeometric extended mortar contact method
Authors:
Thang Xuan Duong,
Laura De Lorenzis,
Roger A. Sauer
Abstract:
This paper presents a new isogeometric mortar contact formulation based on an extended finite element interpolation to capture physical pressure discontinuities at the contact boundary. The so called two-half-pass algorithm is employed, which leads to an unbiased formulation and, when applied to the mortar setting, has the additional advantage that the mortar coupling term is no longer present in…
▽ More
This paper presents a new isogeometric mortar contact formulation based on an extended finite element interpolation to capture physical pressure discontinuities at the contact boundary. The so called two-half-pass algorithm is employed, which leads to an unbiased formulation and, when applied to the mortar setting, has the additional advantage that the mortar coupling term is no longer present in the contact forces. As a result, the computationally expensive segmentation at overlap** master-slave element boundaries, usually required in mortar methods (although often simplified with loss of accuracy), is not needed from the outset. For the numerical integration of general contact problems, the so-called refined boundary quadrature is employed, which is based on adaptive partitioning of contact elements along the contact boundary. The contact patch test shows that the proposed formulation passes the test without using either segmentation or refined boundary quadrature. Several numerical examples are presented to demonstrate the robustness and accuracy of the proposed formulation.
△ Less
Submitted 12 July, 2018; v1 submitted 4 December, 2017;
originally announced December 2017.
-
Computational homogenization of fibrous piezoelectric materials
Authors:
Claudio Maruccio,
Laura De Lorenzis,
Luana Persano,
Dario Pisignano
Abstract:
Flexible piezoelectric devices made of polymeric materials are widely used for micro- and nano-electro-mechanical systems. In particular, numerous recent applications concern energy harvesting. Due to the importance of computational modeling to understand the influence that microscale geometry and constitutive variables exert on the macroscopic behavior, a numerical approach is developed here for…
▽ More
Flexible piezoelectric devices made of polymeric materials are widely used for micro- and nano-electro-mechanical systems. In particular, numerous recent applications concern energy harvesting. Due to the importance of computational modeling to understand the influence that microscale geometry and constitutive variables exert on the macroscopic behavior, a numerical approach is developed here for multiscale and multiphysics modeling of thin piezoelectric sheets made of aligned arrays of polymeric nanofibers, manufactured by electrospinning. At the microscale, the representative volume element consists in piezoelectric polymeric nanofibers, assumed to feature a piezoelastic behavior and subjected to electromechanical contact constraints. The latter are incorporated into the virtual work equations by formulating suitable electric, mechanical and coupling potentials and the constraints are enforced by using the penalty method. From the solution of the micro-scale boundary value problem, a suitable scale transition procedure leads to identifying the performance of a macroscopic thin piezoelectric shell element.
△ Less
Submitted 27 July, 2015; v1 submitted 13 May, 2014;
originally announced May 2014.