-
Sha** Radio Access to Match Variable Wireless Fronthaul Quality in Next-Generation Networks
Authors:
Marcello Morini,
Eugenio Moro,
Ilario Filippini,
Danilo De Donno,
Antonio Capone
Abstract:
The emergence of Centralized-RAN (C-RAN) has revolutionized mobile network infrastructure, offering streamlined cell-site engineering and enhanced network management capabilities. As C-RAN gains momentum, the focus shifts to optimizing fronthaul links. While fiber fronthaul guarantees performance, wireless alternatives provide cost efficiency and scalability, making them preferable in densely urba…
▽ More
The emergence of Centralized-RAN (C-RAN) has revolutionized mobile network infrastructure, offering streamlined cell-site engineering and enhanced network management capabilities. As C-RAN gains momentum, the focus shifts to optimizing fronthaul links. While fiber fronthaul guarantees performance, wireless alternatives provide cost efficiency and scalability, making them preferable in densely urbanized areas. However, wireless fronthaul often requires expensive over-dimensioning to overcome the challenging atmospheric attenuation typical of high frequencies. We propose a framework designed to continuously align radio access capacity with fronthaul link quality to overcome this rigidity. By gradually adapting radio access capacity to available fronthaul capacity, the framework ensures smooth degradation rather than complete service loss. Various strategies are proposed, considering factors like functional split and beamforming technology and exploring the tradeoff between adaptation strategy complexity and end-to-end system performance. Numerical evaluations using experimental rain attenuation data illustrate the framework's effectiveness in optimizing radio access capacity under realistically variable fronthaul link quality, ultimately proving the importance of adaptive capacity management in maximizing C-RAN efficiency.
△ Less
Submitted 22 June, 2024;
originally announced June 2024.
-
Exploring Upper-6GHz and mmWave in Real-World 5G Networks: A Direct on-Field Comparison
Authors:
Marcello Morini,
Eugenio Moro,
Ilario Filippini,
Antonio Capone,
Danilo De Donno
Abstract:
The spectrum crunch challenge poses a vital threat to the progress of cellular networks and recently prompted the inclusion of millimeter wave (mmWave) and Upper 6GHz (U6G) in the 3GPP standards. These two bands promise to unlock a large portion of untapped spectrum, but the harsh propagation due to the increased carrier frequency might negatively impact the performance of urban Radio Access Netwo…
▽ More
The spectrum crunch challenge poses a vital threat to the progress of cellular networks and recently prompted the inclusion of millimeter wave (mmWave) and Upper 6GHz (U6G) in the 3GPP standards. These two bands promise to unlock a large portion of untapped spectrum, but the harsh propagation due to the increased carrier frequency might negatively impact the performance of urban Radio Access Network (RAN) deployments. Within the span of a year, two co-located 5G networks operating in these frequency bands were deployed at Politecnico di Milano, Milan, Italy, entirely dedicated to the dense urban performance assessment of the two systems. This paper presents an in-depth analysis of the measurement campaigns conducted on them, with the U6G campaign representing the first of its kind. A benchmark is provided by ray-tracing simulations. The results suggest that networks operating in these frequency bands provide good indoor and outdoor coverage and throughput in urban scenarios, even when deployed in the macro base station setup common to lower frequencies. In addition, a comparative performance analysis of these two key technologies is provided, offering insights on their relative strengths, weaknesses and improvement margins and informing on which bands is better suited for urban macro coverage.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Sha** Next-Generation RAN Topologies to Meet Future Traffic Demands: A Peak Throughput Study
Authors:
Paolo Fiore,
Ilario Filippini,
Danilo De Donno
Abstract:
Millimeter-Wave (mm-Wave) Radio Access Networks (RANs) are a promising solution to tackle the overcrowding of the sub-6 GHz spectrum, offering wider and underutilized bands. However, they are characterized by inherent technical challenges, such as a limited propagation range and blockage losses caused by obstacles. Integrated Access and Backhaul (IAB) and Reconfigurable Intelligent Surfaces (RIS)…
▽ More
Millimeter-Wave (mm-Wave) Radio Access Networks (RANs) are a promising solution to tackle the overcrowding of the sub-6 GHz spectrum, offering wider and underutilized bands. However, they are characterized by inherent technical challenges, such as a limited propagation range and blockage losses caused by obstacles. Integrated Access and Backhaul (IAB) and Reconfigurable Intelligent Surfaces (RIS) are two technologies devised to face these challenges. This work analyzes the optimal network layout of RANs equipped with IAB and RIS in real urban scenarios using MILP formulations to derive practical design guidelines. In particular, it shows how optimizing the peak user throughput of such networks improves the achievable peak throughput, compared to the traditional mean-throughput maximization approaches, without actually sacrificing mean throughputs. In addition, it indicates star-like topologies as the best network layout to achieve the highest peak throughputs.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Towards a Heterogeneous Smart Electromagnetic Environment for Millimeter-Wave Communications: An Industrial Viewpoint
Authors:
Roberto Flamini,
Danilo De Donno,
Jonathan Gambini,
Francesco Giuppi,
Christian Mazzucco,
Angelo Milani,
Laura Resteghini
Abstract:
Fifth generation (5G) and beyond communication systems open the door to millimeter Wave (mmWave) frequency bands to leverage the extremely large operating bandwidths and deliver unprecedented network capacity. These frequency bands are affected by high propagation losses that severely limit the achievable coverage. The simplest way to address this problem would be to increase the number of install…
▽ More
Fifth generation (5G) and beyond communication systems open the door to millimeter Wave (mmWave) frequency bands to leverage the extremely large operating bandwidths and deliver unprecedented network capacity. These frequency bands are affected by high propagation losses that severely limit the achievable coverage. The simplest way to address this problem would be to increase the number of installed mmWave base stations (BSs), at the same time augmenting the overall network cost, power consumption and ElectroMagnetic Field (EMF) levels. As alternative direction, here we propose to complement the macro-layer of mmWave BSs with a heterogeneous deployment of Smart Electromagnetic (Smart EM) Entities - namely IAB nodes, Smart Repeaters, Reconfigurable Intelligent Surfaces (RISs) and passive surfaces - that is judiciously planned to minimize the total installation costs while at the same time optimizing the network spectral efficiency. Initial network planning results underline the effectiveness of the proposed approach. The available technologies and the key research directions for achieving this view are thoroughly discussed by accounting for issues ranging from system-level design to the development of new materials.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Boosting 5G mm-Wave IAB Reliability with Reconfigurable Intelligent Surfaces
Authors:
Paolo Fiore,
Eugenio Moro,
Ilario Filippini,
Antonio Capone,
Danilo De Donno
Abstract:
The introduction of the mm-Wave spectrum into 5G NR promises to bring about unprecedented data throughput to future mobile wireless networks but comes with several challenges. Network densification has been proposed as a viable solution to increase RAN resilience, and the newly introduced Integrated-Access-and-Backhaul (IAB) is considered a key enabling technology with compelling cost-reducing opp…
▽ More
The introduction of the mm-Wave spectrum into 5G NR promises to bring about unprecedented data throughput to future mobile wireless networks but comes with several challenges. Network densification has been proposed as a viable solution to increase RAN resilience, and the newly introduced Integrated-Access-and-Backhaul (IAB) is considered a key enabling technology with compelling cost-reducing opportunities for such dense deployments. Reconfigurable Intelligent Surfaces (RIS) have recently gained extreme popularity as they can create Smart Radio Environments by EM wave manipulation and behave as inexpensive passive relays. However, it is not yet clear what role this technology can play in a large RAN deployment. With the scope of filling this gap, we study the blockage resilience of realistic mm-Wave RAN deployments that use IAB and RIS. The RAN layouts have been optimised by means of a novel mm-Wave planning tool based on MILP formulation. Numerical results show how adding RISs to IAB deployments can provide high blockage resistance levels while significantly reducing the overall network planning cost.
△ Less
Submitted 20 January, 2022; v1 submitted 7 June, 2021;
originally announced June 2021.
-
Planning Mm-Wave Access Networks With Reconfigurable Intelligent Surfaces
Authors:
Eugenio Moro,
Ilario Filippini,
Antonio Capone,
Danilo De Donno
Abstract:
With the capability to support gigabit data rates, millimetre-wave (mm-Wave) communication is unanimously considered a key technology of future cellular networks. However, the harsh propagation at such high frequencies makes these networks quite susceptible to failures due to obstacle blockages. Recently introduced Reconfigurable Intelligent Surfaces (RISs) can enhance the coverage of mm-Wave comm…
▽ More
With the capability to support gigabit data rates, millimetre-wave (mm-Wave) communication is unanimously considered a key technology of future cellular networks. However, the harsh propagation at such high frequencies makes these networks quite susceptible to failures due to obstacle blockages. Recently introduced Reconfigurable Intelligent Surfaces (RISs) can enhance the coverage of mm-Wave communications by improving the received signal power and offering an alternative radio path when the direct link is interrupted. While several works have addressed this possibility from a communication standpoint, none of these has yet investigated the impact of RISs on large-scale mm-Wave networks. Aiming to fill this literature gap, we propose a new mathematical formulation of the coverage planning problem that includes RISs. Using well-established planning methods, we have developed a new optimization model where RISs can be installed alongside base stations to assist the communications, creating what we have defined as Smart Radio Connections. Our simulation campaigns show that RISs effectively increase both throughput and coverage of access networks, while further numerical results highlight additional benefits that the simplified scenarios analyzed by previous works could not reveal.
△ Less
Submitted 8 June, 2021; v1 submitted 25 May, 2021;
originally announced May 2021.
-
Statistical Location and Rotation-Aware Beam Search for Millimeter-Wave Networks
Authors:
Maurizio Rea,
Domenico Giustiniano,
Guillermo Bielsa,
Danilo De Donno,
Joerg Widmer
Abstract:
Beam training in dynamic millimeter-wave (mm-wave) networks with mobile devices is highly challenging as devices must scan a large angular domain to maintain alignment of their directional antennas under mobility. Device rotation is particularly challenging, as a handheld device may rotate significantly over a very short period of time, causing it to lose the connection to the Access Point (AP) un…
▽ More
Beam training in dynamic millimeter-wave (mm-wave) networks with mobile devices is highly challenging as devices must scan a large angular domain to maintain alignment of their directional antennas under mobility. Device rotation is particularly challenging, as a handheld device may rotate significantly over a very short period of time, causing it to lose the connection to the Access Point (AP) unless the rotation is accompanied by immediate beam realignment. We study how to maintain the link to a mm-wave AP under rotation and without any input from inertial sensors, exploiting the fact that mm-wave devices will typically be multi-band. We present a model that maps Time-of-Flight measurements to rotation and propose a method to infer the rotation speed of the mobile terminal using only measurements from sub-6 GHz WiFi. We also use the same sub-6 GHz WiFi system to reduce the angle error estimate for link establishment, exploiting the spatial geometry of the deployed APs and a statistical model that maps the user position's spatial distribution to an angle error distribution. We leverage these findings to introduce SLASH, a Statistical Location and rotation-Aware beam SearcH algorithm that adaptively narrows the sector search space and accelerates both link establishment and maintenance between mm-wave devices. We evaluate SLASH with experiments conducted indoors with a sub-6 GHz WiFi Time-of-Flight positioning system and a 60-GHz testbed. SLASH can increase the data rate by more than 41% for link establishment and 67% for link maintenance with respect to prior work.
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
-
Tracking mm-Wave Channel Dynamics: Fast Beam Training Strategies under Mobility
Authors:
Joan Palacios,
Danilo De Donno,
Joerg Widmer
Abstract:
In order to cope with the severe path loss, millimeter-wave (mm-wave) systems exploit highly directional communication. As a consequence, even a slight beam misalignment between two communicating devices (for example, due to mobility) can generate a significant signal drop. This leads to frequent invocations of time-consuming mechanisms for beam re-alignment, which deteriorate system performance.…
▽ More
In order to cope with the severe path loss, millimeter-wave (mm-wave) systems exploit highly directional communication. As a consequence, even a slight beam misalignment between two communicating devices (for example, due to mobility) can generate a significant signal drop. This leads to frequent invocations of time-consuming mechanisms for beam re-alignment, which deteriorate system performance. In this paper, we propose smart beam training and tracking strategies for fast mm-wave link establishment and maintenance under node mobility. We leverage the ability of hybrid analog-digital transceivers to collect channel information from multiple spatial directions simultaneously and formulate a probabilistic optimization problem to model the temporal evolution of the mm-wave channel under mobility. In addition, we present for the first time a beam tracking algorithm that extracts information needed to update the steering directions directly from data packets, without the need for spatial scanning during the ongoing data transmission. Simulation results, obtained by a custom simulator based on ray tracing, demonstrate the ability of our beam training/tracking strategies to keep the communication rate only 10% below the optimal bound. Compared to the state of the art, our approach provides a 40% to 150% rate increase, yet requires lower complexity hardware.
△ Less
Submitted 23 December, 2016;
originally announced December 2016.
-
Enabling Self-Powered Autonomous Wireless Sensors with New-Generation I2C-RFID Chips
Authors:
D. De Donno,
L. Catarinucci,
L. Tarricone
Abstract:
A self-powered autonomous RFID device with sensing and computing capabilities is presented in this paper. Powered by an RF energy-harvesting circuit enhanced by a DC-DC voltage booster in silicon-on-insulator (SOI) technology, the device relies on a microcontroller and a new generation I2C-RFID chip to wirelessly deliver sensor data to standard RFID EPC Class-1 Generation-2 (Gen2) readers. When th…
▽ More
A self-powered autonomous RFID device with sensing and computing capabilities is presented in this paper. Powered by an RF energy-harvesting circuit enhanced by a DC-DC voltage booster in silicon-on-insulator (SOI) technology, the device relies on a microcontroller and a new generation I2C-RFID chip to wirelessly deliver sensor data to standard RFID EPC Class-1 Generation-2 (Gen2) readers. When the RF power received from the interrogating reader is -14 dBm or higher, the device, fabricated on an FR4 substrate using low-cost discrete components, is able to produce 2.4-V DC voltage to power its circuitry. The experimental results demonstrate the effectiveness of the device to perform reliable sensor data transmissions up to 5 meters in fully-passive mode. To the best of our knowledge, this represents the longest read range ever reported for passive UHF RFID sensors compliant with the EPC Gen2 standard.
△ Less
Submitted 21 May, 2013;
originally announced May 2013.
-
An UHF RFID Energy-Harvesting System Enhanced by a DC-DC Charge Pump in Silicon-on-Insulator Technology
Authors:
D. De Donno,
L. Catarinucci,
L. Tarricone
Abstract:
An RF-DC converter enhanced by a DC-DC voltage booster in silicon-on-insulator technology for UHF radio frequency identification (RFID) energy harvesting is presented in this letter. When the received RF power level is -14 dBm or higher, the system, fabricated on an FR4 substrate using off-the-shelf low-cost discrete components and connected to a flexible dipole antenna, is able to produce 2.4-V D…
▽ More
An RF-DC converter enhanced by a DC-DC voltage booster in silicon-on-insulator technology for UHF radio frequency identification (RFID) energy harvesting is presented in this letter. When the received RF power level is -14 dBm or higher, the system, fabricated on an FR4 substrate using off-the-shelf low-cost discrete components and connected to a flexible dipole antenna, is able to produce 2.4-V DC voltage to power general-purpose electronic devices. As a simple proof of concept,a device comprising microcontroller, temperature sensor, and EEPROM is considered in this work. The experimental results demonstrate the capability of the system to autonomously perform temperature data logging up to a distance of 5 m from a conventional UHF RFID reader used as an RF energy source.
△ Less
Submitted 4 June, 2013; v1 submitted 21 May, 2013;
originally announced May 2013.