-
Optimization-free Ground Contact Force Constraint Satisfaction in Quadrupedal Locomotion
Authors:
Eric Sihite,
Pravin Dangol,
Alireza Ramezani
Abstract:
We are seeking control design paradigms for legged systems that allow bypassing costly algorithms that depend on heavy on-board computers widely used in these systems and yet being able to match what they can do by using less expensive optimization-free frameworks. In this work, we present our preliminary results in modeling and control design of a quadrupedal robot called \textit{Husky Carbon}, w…
▽ More
We are seeking control design paradigms for legged systems that allow bypassing costly algorithms that depend on heavy on-board computers widely used in these systems and yet being able to match what they can do by using less expensive optimization-free frameworks. In this work, we present our preliminary results in modeling and control design of a quadrupedal robot called \textit{Husky Carbon}, which under development at Northeastern University (NU) in Boston. In our approach, we utilized a supervisory controller and an Explicit Reference Governor (ERG) to enforce ground reaction force constraints. These constraints are usually enforced using costly optimizations. However, in this work, the ERG manipulates the state references applied to the supervisory controller to enforce the ground contact constraints through an updated law based on Lyapunov stability arguments. As a result, the approach is much faster to compute than the widely used optimization-based methods.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Unilateral Ground Contact Force Regulations in Thruster-Assisted Legged Locomotion
Authors:
Eric Sihite,
Pravin Dangol,
Alireza Ramezani
Abstract:
In this paper, we study the regulation of the Ground Contact Forces (GRF) in thruster-assisted legged locomotion. We will employ Reference Governors (RGs) for enforcing GRF constraints in Harpy model which is a bipedal robot that is being developed at Northeastern University. Optimization-based methods and whole body control are widely used for enforcing the no-slip constraints in legged locomotio…
▽ More
In this paper, we study the regulation of the Ground Contact Forces (GRF) in thruster-assisted legged locomotion. We will employ Reference Governors (RGs) for enforcing GRF constraints in Harpy model which is a bipedal robot that is being developed at Northeastern University. Optimization-based methods and whole body control are widely used for enforcing the no-slip constraints in legged locomotion which can be very computationally expensive. In contrast, RGs can enforce these constraints by manipulating joint reference trajectories using Lyapunov stability arguments which can be computed much faster. The addition of the thrusters in our model allows to manipulate the gait parameters and the GRF without sacrificing the locomotion stability.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Reduced-Order-Model-Based Feedback Design for Thruster-Assisted Legged Locomotion
Authors:
Pravin Dangol,
Alireza Ramezani
Abstract:
Real-time constraint satisfaction for robots can be quite challenging due to the high computational complexity that arises when accounting for the system dynamics and environmental interactions, often requiring simplification in modelling that might not necessarily account for all performance criteria.
We instead propose an optimization-free approach where reference trajectories are manipulated…
▽ More
Real-time constraint satisfaction for robots can be quite challenging due to the high computational complexity that arises when accounting for the system dynamics and environmental interactions, often requiring simplification in modelling that might not necessarily account for all performance criteria.
We instead propose an optimization-free approach where reference trajectories are manipulated to satisfy constraints brought on by ground contact as well as those prescribed for states and inputs. Unintended changes to trajectories especially ones optimized to produce periodic gaits can adversely affect gait stability, however we will show our approach can still guarantee stability of a gait by employing the use of coaxial thrusters that are unique to our robot.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Generative Design of NU's Husky Carbon, A Morpho-Functional, Legged Robot
Authors:
Alireza Ramezani,
Pravin Dangol,
Eric Sihite,
Andrew Lessieur,
Peter Kelly
Abstract:
We report the design of a morpho-functional robot called Husky Carbon. Our goal is to integrate two forms of mobility, aerial and quadrupedal-legged locomotion, within a single platform. There are prohibitive design restrictions such as tight power budget and payload, which can particularly become important in aerial flights. To address these challenges, we pose a problem called the Mobility Value…
▽ More
We report the design of a morpho-functional robot called Husky Carbon. Our goal is to integrate two forms of mobility, aerial and quadrupedal-legged locomotion, within a single platform. There are prohibitive design restrictions such as tight power budget and payload, which can particularly become important in aerial flights. To address these challenges, we pose a problem called the Mobility Value of Added Mass (MVAM) problem. In the MVAM problem, we attempt to allocate mass in our designs such that the energetic performance is affected the least. To solve the MVAM problem, we adopted a generative design approach using Grasshopper's evolutionary solver to synthesize a parametric design space for Husky. Then, this space was searched for the morphologies that could yield a minimized Total Cost Of Transport (TCOT) and payload. This approach revealed that a front-heavy quadrupedal robot can achieve a lower TCOT while retaining larger margins on allowable added mass to its design. Based on this framework Husky was built and tested as a front-heavy robot.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
An Integrated Mechanical Intelligence and Control Approach Towards Flight Control of Aerobat
Authors:
Eric Sihite,
Atefe Darabi,
Pravin Dangol,
Andrew Lessieur,
Alireza Ramezani
Abstract:
Our goal in this work is to expand the theory and practice of robot locomotion by addressing critical challenges associated with the robotic biomimicry of bat aerial locomotion. Bats are known for their pronounced, fast wing articulations, e.g., bats can mobilize as many as forty joints during a single wingbeat, with some joints reaching over one thousand degrees per second in angular speed. Copyi…
▽ More
Our goal in this work is to expand the theory and practice of robot locomotion by addressing critical challenges associated with the robotic biomimicry of bat aerial locomotion. Bats are known for their pronounced, fast wing articulations, e.g., bats can mobilize as many as forty joints during a single wingbeat, with some joints reaching over one thousand degrees per second in angular speed. Copying bats flight is a significant ordeal, however, very rewarding. Aerial drones with morphing bodies similar to bats can be safer, agile and energy-efficient owing to their articulated and soft wings. Current design paradigms have failed to copy bat flight because they assume only closed-loop feedback roles and ignore computational roles carried out by morphology. To respond to the urgency, a design framework called Morphing via Integrated Mechanical Intelligence and Control (MIMIC) is proposed. In this paper, using the dynamic model of Northeastern University's Aerobat, which is designed to test the effectiveness of the MIMIC framework, it will be shown that computational structures and closed-loop feedback can be successfully used to mimic bats stable flight apparatus.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Rough-Terrain Locomotion and Unilateral Contact Force Regulations With a Multi-Modal Legged Robot
Authors:
Kaier Liang,
Eric Sihite,
Pravin Dangol,
Andrew Lessieur,
Alireza Ramezani
Abstract:
Despite many accomplishments by legged robot designers, state-of-the-art bipedal robots are prone to falling over, cannot negotiate extremely rough terrains and cannot directly regulate unilateral contact forces. Our objective is to integrate merits of legged and aerial robots in a single platform. We will show that the thrusters in a bipedal legged robot called Harpy can be leveraged to stabilize…
▽ More
Despite many accomplishments by legged robot designers, state-of-the-art bipedal robots are prone to falling over, cannot negotiate extremely rough terrains and cannot directly regulate unilateral contact forces. Our objective is to integrate merits of legged and aerial robots in a single platform. We will show that the thrusters in a bipedal legged robot called Harpy can be leveraged to stabilize the robot's frontal dynamics and permit jum** over large obstacles which is an unusual capability not reported before. In addition, we will capitalize on the thrusters action in Harpy and will show that one can avoid using costly optimization-based schemes by directly regulating contact forces using an Reference Governor (RGs). We will resolve gait parameters and re-plan them during gait cycles by only assuming well-tuned supervisory controllers. Then, we will focus on RG-based fine-tuning of the joints desired trajectories to satisfy unilateral contact force constraints.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Mechanical design and fabrication of a kinetic sculpture with application to bioinspired drone design
Authors:
Andrew Lessieur,
Eric Sihite,
Pravin Dangol,
Akshath Singhal,
Alireza Ramezani
Abstract:
Biologically-inspired robots are a very interesting and difficult branch of robotics dues to its very rich dynamical and morphological complexities. Among them, flying animals, such as bats, have been among the most difficult to take inspiration from as they exhibit complex wing articulation. We attempt to capture several of the key degrees-of-freedom that are present in the natural flap** gait…
▽ More
Biologically-inspired robots are a very interesting and difficult branch of robotics dues to its very rich dynamical and morphological complexities. Among them, flying animals, such as bats, have been among the most difficult to take inspiration from as they exhibit complex wing articulation. We attempt to capture several of the key degrees-of-freedom that are present in the natural flap** gait of a bat. In this work, we present the mechanical design and analysis of our flap** wing robot, the Aerobat, where we capture the plunging and flexion-extension in the bat's flap** modes. This robot utilizes gears, cranks, and four-bar linkage mechanisms to actuate the arm-wing structure composed of rigid and flexible components monolithically fabricated using PolyJet 3D printing. The resulting robot exhibits wing expansion and retraction during the downstroke and upstroke respectively which minimizes the negative lift and results in a more efficient flap** gait.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Orientation stabilization in a bioinspired bat-robot using integrated mechanical intelligence and control
Authors:
Eric Sihite,
Andrew Lessieur,
Pravin Dangol,
Akshath Singhal,
Alireza Ramezani
Abstract:
Our goal in this work is to expand the theory and practice of robot locomotion by addressing critical challenges associated with the robotic biomimicry of bat aerial locomotion. Bats wings exhibit fast wing articulation and can mobilize as many as 40 joints within a single wingbeat. Mimicking bat flight can be a significant ordeal and the current design paradigms have failed as they assume only cl…
▽ More
Our goal in this work is to expand the theory and practice of robot locomotion by addressing critical challenges associated with the robotic biomimicry of bat aerial locomotion. Bats wings exhibit fast wing articulation and can mobilize as many as 40 joints within a single wingbeat. Mimicking bat flight can be a significant ordeal and the current design paradigms have failed as they assume only closed-loop feedback roles through sensors and conventional actuators while ignoring the computational role carried by morphology. In this paper, we propose a design framework called Morphing via Integrated Mechanical Intelligence and Control (MIMIC) which integrates small and low energy actuators to control the robot through a change in morphology. In this paper, using the dynamic model of Northeastern University's Aerobat, which is designed to test the effectiveness of the MIMIC framework, it will be shown that computational structures and closed-loop feedback can be successfully used to mimic bats stable flight apparatus.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Towards thruster-assisted bipedal locomotion for enhanced efficiency and robustness
Authors:
Pravin Dangol,
Alireza Ramezani
Abstract:
In this paper, we will report our efforts in designing closed-loop feedback for the thruster-assisted walking of bipedal robots. We will assume for well-tuned supervisory controllers and will focus on fine-tuning the joints desired trajectories to satisfy the performance being sought. In doing this, we will devise an intermediary filter based on reference governors that guarantees the satisfaction…
▽ More
In this paper, we will report our efforts in designing closed-loop feedback for the thruster-assisted walking of bipedal robots. We will assume for well-tuned supervisory controllers and will focus on fine-tuning the joints desired trajectories to satisfy the performance being sought. In doing this, we will devise an intermediary filter based on reference governors that guarantees the satisfaction of performance-related constraints. Since these modifications and impact events lead to deviations from the desired periodic orbits, we will guarantee hybrid invariance in a robust way by applying predictive schemes withing a very short time envelope during the gait cycle. To achieve the hybrid invariance, we will leverage the unique features in our model, that is, the thrusters. The merit of our approach is that unlike existing optimization-based nonlinear control methods, satisfying performance-related constraints during the single support phase does not rely on expensive numeric approaches. In addition, the overall structure of the proposed thruster-assisted gait control allows for exploiting performance and robustness enhancing capabilities during specific parts of the gait cycle, which is unusual and not reported before.
△ Less
Submitted 29 April, 2020;
originally announced May 2020.
-
Performance satisfaction in Harpy, a thruster-assisted bipedal robot
Authors:
Pravin Dangol,
Alireza Ramezani,
Nader Jalili
Abstract:
We will report our efforts in designing feedback for the thruster-assisted walking of a bipedal robot. We will assume for well-tuned supervisory controllers and will focus on fine-tuning the desired joint trajectories to satisfy the performance being sought. In doing this, we will devise an intermediary filter based on the emerging idea of reference governors. Since these modifications and impact…
▽ More
We will report our efforts in designing feedback for the thruster-assisted walking of a bipedal robot. We will assume for well-tuned supervisory controllers and will focus on fine-tuning the desired joint trajectories to satisfy the performance being sought. In doing this, we will devise an intermediary filter based on the emerging idea of reference governors. Since these modifications and impact events lead to deviations from the desired periodic orbits, we will guarantee hybrid invariance in a robust fashion by applying predictive schemes within a short time envelope during the double support phase of a gait cycle. To achieve the hybrid invariance, we will leverage the unique features in our robot, i.e., the thruster.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
