-
FPGA Implementation of OTFS Modulation for 6G Communication Systems
Authors:
Murat Isik,
Malvin Nkomo,
Anup Das,
Kapil R. Dandekar
Abstract:
Sixth-generation (6G) communication systems are poised to accommodate high data-rate wireless communication services in highly dynamic channels, with applications including high-speed trains, unmanned aerial vehicles, and intelligent transportation systems. Orthogonal frequency-division multiplexing (OFDM) modulation suffers from performance degradation in such high-mobility applications due to hi…
▽ More
Sixth-generation (6G) communication systems are poised to accommodate high data-rate wireless communication services in highly dynamic channels, with applications including high-speed trains, unmanned aerial vehicles, and intelligent transportation systems. Orthogonal frequency-division multiplexing (OFDM) modulation suffers from performance degradation in such high-mobility applications due to high Doppler spread in the channel. The recently proposed Orthogonal Time Frequency Space (OTFS) modulation scheme outperforms OFDM in terms of supporting a higher transmitter (Tx) and receiver (Rx) user velocity. Additionally, the highly-dynamic time-frequency (TF) channel has little effect on OTFS modulated signals, which enables the realization of low-complexity pre-processing architectures for implementing massive-multiple input multiple outputs (MIMO) based OTFS systems. However, while OTFS has received attention in the literature from a theory and simulation perspective, there has been comparatively little work on real-time FPGA implementation of OTFS waveforms. Thus, in this paper, we first present a mathematical overview of OTFS modulation and then describe an FPGA implementation of OTFS implementation on hardware. Power, area, and timing analysis of the implemented design on a Zynq UltraScale+ RFSoC FPGA are provided for benchmarking purposes.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Energy-Efficient Respiratory Anomaly Detection in Premature Newborn Infants
Authors:
Ankita Paul,
Md. Abu Saleh Ta**,
Anup Das,
William M. Mongan,
Kapil R. Dandekar
Abstract:
Precise monitoring of respiratory rate in premature infants is essential to initiate medical interventions as required. Wired technologies can be invasive and obtrusive to the patients. We propose a Deep Learning enabled wearable monitoring system for premature newborn infants, where respiratory cessation is predicted using signals that are collected wirelessly from a non-invasive wearable Bellypa…
▽ More
Precise monitoring of respiratory rate in premature infants is essential to initiate medical interventions as required. Wired technologies can be invasive and obtrusive to the patients. We propose a Deep Learning enabled wearable monitoring system for premature newborn infants, where respiratory cessation is predicted using signals that are collected wirelessly from a non-invasive wearable Bellypatch put on infant's body. We propose a five-stage design pipeline involving data collection and labeling, feature scaling, model selection with hyperparameter tuning, model training and validation, model testing and deployment. The model used is a 1-D Convolutional Neural Network (1DCNN) architecture with 1 convolutional layer, 1 pooling layer and 3 fully-connected layers, achieving 97.15% accuracy. To address energy limitations of wearable processing, several quantization techniques are explored and their performance and energy consumption are analyzed. We propose a novel Spiking-Neural-Network(SNN) based respiratory classification solution, which can be implemented on event-driven neuromorphic hardware. We propose an approach to convert the analog operations of our baseline 1DCNN to their spiking equivalent. We perform a design-space exploration using the parameters of the converted SNN to generate inference solutions having different accuracy and energy footprints. We select a solution that achieves 93.33% accuracy with 18 times lower energy compared with baseline 1DCNN model. Additionally the proposed SNN solution achieves similar accuracy but with 4 times less energy.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
FPGA Implementation of a Scalable and Run-Time Adaptable Multi-Standard Packet Detector
Authors:
James Chacko,
Marko Jacovic,
Nagarajan Kandasamy,
Kapil R. Dandekar
Abstract:
This paper describes a step by step approach for implementing a scalable and run-time adaptable multi-standard packet detector for orthogonal frequency divisional multiplexing (OFDM) based communication standards. The paper briefly describes considerations and design choices in making a modular system block with generic control supporting rapid prototy** and implementation of preamble-based pack…
▽ More
This paper describes a step by step approach for implementing a scalable and run-time adaptable multi-standard packet detector for orthogonal frequency divisional multiplexing (OFDM) based communication standards. The paper briefly describes considerations and design choices in making a modular system block with generic control supporting rapid prototy** and implementation of preamble-based packet detectors. The results were generated through implementation on a Xilinx Virtex-6 FPGA with a MicroBlaze processor instantiated to provide run-time control and adaptability.
△ Less
Submitted 13 September, 2016;
originally announced November 2016.
-
Experimental Evaluation of a Reconfigurable Antenna System for Blind Interference Alignment
Authors:
Simon Begashaw,
James Chacko,
Nikhil Gulati,
Danh H. Nguyen,
Nagarajan Kandasamy,
Kapil R. Dandekar
Abstract:
In recent years, several experimental studies have come out to validate the theoretical findings of interference alignment (IA), but only a handful of studies have focused on blind interference alignment. Unlike IA and other interference mitigation techniques, blind IA does not require channel state information at the transmitter (CSIT). The key insight is that the transmitter uses the knowledge o…
▽ More
In recent years, several experimental studies have come out to validate the theoretical findings of interference alignment (IA), but only a handful of studies have focused on blind interference alignment. Unlike IA and other interference mitigation techniques, blind IA does not require channel state information at the transmitter (CSIT). The key insight is that the transmitter uses the knowledge of channel coherence intervals and receivers utilize reconfigurable antennas to create channel fluctuations exploited by the transmitter. In this work, we present a novel experimental evaluation of a reconfigurable antenna system for achieving blind IA. We present a blind IA technique based on reconfigurable antennas for a 2-user multipleinput single-output (MISO) broadcast channel implemented on a software defined radio platform where each of the receivers is equipped with a reconfigurable antenna. We further compare this blind IA implementation with traditional TDMA scheme for benchmarking purposes. We show that the achievable rates for blind IA can be realized in practice using measured channels under practical channel conditions. Additionally, the average error vector magnitude and bit error rate (BER) performances are evaluated.
△ Less
Submitted 29 March, 2016;
originally announced March 2016.
-
Analysis and Augmented Spatial Processing for Uplink OFDMA MU-MIMO Receiver with Transceiver I/Q Imbalance and External Interference
Authors:
Aki Hakkarainen,
Janis Werner,
Kapil R. Dandekar,
Mikko Valkama
Abstract:
We address receiver (RX) signal processing in MIMO systems under in-phase/quadrature (I/Q) imbalance, which causes cross-talk of mirror-subcarriers in OFDM systems. We extend the typically reported single-user studies to uplink OFDMA-based multiuser MIMO, with simultaneous user multiplexing in frequency and spatial domains. We also incorporate multiple external interferers, for modeling challengin…
▽ More
We address receiver (RX) signal processing in MIMO systems under in-phase/quadrature (I/Q) imbalance, which causes cross-talk of mirror-subcarriers in OFDM systems. We extend the typically reported single-user studies to uplink OFDMA-based multiuser MIMO, with simultaneous user multiplexing in frequency and spatial domains. We also incorporate multiple external interferers, for modeling challenging conditions in heterogeneous networks. In the signal processing developments, we exploit the augmented subcarrier processing, which processes each subcarrier jointly with its counterpart at the image subcarrier, and jointly across RX antennas. Furthermore, we derive an augmented LMMSE RX. The novel approach integrates the I/Q imbalance mitigation, interference suppression and data stream separation into a single processing stage, thus avoiding a separate transceiver calibration. Our numerical results show the signal-to-interference-plus-noise ratio and symbol-error rate of an arbitrary data stream after RX processing as a function of different system parameters. The per-subcarrier processing is shown to suffer heavily under I/Q imbalances, and being particularly sensitive to external interferers, whereas the augmented method provides efficient data stream separation and interference suppression. Finally, we extend the studies to massive MIMO framework and show that the per-subcarrier processing still suffers from performance degradation, whereas the augmented approach can fully exploit the array gain.
△ Less
Submitted 25 February, 2016; v1 submitted 2 July, 2014;
originally announced July 2014.
-
ALOHA With Collision Resolution(ALOHA-CR): Theory and Software Defined Radio Implementation
Authors:
Xin Liu,
John Kountouriotis,
Athina P. Petropulu,
Kapil R. Dandekar
Abstract:
A cross-layer scheme, namely ALOHA With Collision Resolution (ALOHA-CR), is proposed for high throughput wireless communications in a cellular scenario. Transmissions occur in a time-slotted ALOHA-type fashion but with an important difference: simultaneous transmissions of two users can be successful. If more than two users transmit in the same slot the collision cannot be resolved and retransmi…
▽ More
A cross-layer scheme, namely ALOHA With Collision Resolution (ALOHA-CR), is proposed for high throughput wireless communications in a cellular scenario. Transmissions occur in a time-slotted ALOHA-type fashion but with an important difference: simultaneous transmissions of two users can be successful. If more than two users transmit in the same slot the collision cannot be resolved and retransmission is required. If only one user transmits, the transmitted packet is recovered with some probability, depending on the state of the channel. If two users transmit the collision is resolved and the packets are recovered by first over-sampling the collision signal and then exploiting independent information about the two users that is contained in the signal polyphase components. The ALOHA-CR throughput is derived under the infinite backlog assumption and also under the assumption of finite backlog. The contention probability is determined under these two assumptions in order to maximize the network throughput and maintain stability. Queuing delay analysis for network users is also conducted. The performance of ALOHA-CR is demonstrated on the Wireless Open Access Research Platform (WARP) test-bed containing five software defined radio nodes. Analysis and test-bed results indicate that ALOHA-CR leads to significant increase in throughput and reduction of service delays.
△ Less
Submitted 16 September, 2009;
originally announced September 2009.