Showing 1–50 of 103 results for author: Clark, A

Malleable Robots: Reconfigurable Robotic Arms with Continuum Links of Variable Stiffness

Authors: Angus B. Clark, Nicolas Rojas

Abstract: Through the implementation of reconfigurability to achieve flexibility and adaptation to tasks by morphology changes rather than by increasing the number of joints, malleable robots present advantages over traditional serial robot arms in regards to reduced weight, size, and cost. While limited in degrees of freedom (DOF), malleable robots still provide versatility across operations typically serv… ▽ More Through the implementation of reconfigurability to achieve flexibility and adaptation to tasks by morphology changes rather than by increasing the number of joints, malleable robots present advantages over traditional serial robot arms in regards to reduced weight, size, and cost. While limited in degrees of freedom (DOF), malleable robots still provide versatility across operations typically served by systems using higher DOF than required by the tasks. In this paper, we present the creation of a 2-DOF malleable robot, detailing the design of joints and malleable link, along with its modelling through forward and inverse kinematics, and a reconfiguration methodology that informs morphology changes based on end effector location -- determining how the user should reshape the robot to enable a task previously unattainable. The recalibration and motion planning for making robot motion possible after reconfiguration are also discussed, and thorough experiments with the prototype to evaluate accuracy and reliability of the system are presented. Results validate the approach and pave the way for further research in the area. △ Less

Submitted 15 April, 2024; originally announced July 2024.

Comments: 18 pages, 24 figures

Journal ref: IEEE Transactions on Robotics, vol. 38, no. 6, pp. 3832-3849, Dec. 2022

Verification and Synthesis of Compatible Control Lyapunov and Control Barrier Functions

Authors: Hongkai Dai, Chuanrui Jiang, Hongchao Zhang, Andrew Clark

Abstract: Safety and stability are essential properties of control systems. Control Barrier Functions (CBFs) and Control Lyapunov Functions (CLFs) have been proposed to ensure safety and stability respectively. However, previous approaches typically verify and synthesize the CBFs and CLFs separately, satisfying their respective constraints, without proving that the CBFs and CLFs are compatible with each oth… ▽ More Safety and stability are essential properties of control systems. Control Barrier Functions (CBFs) and Control Lyapunov Functions (CLFs) have been proposed to ensure safety and stability respectively. However, previous approaches typically verify and synthesize the CBFs and CLFs separately, satisfying their respective constraints, without proving that the CBFs and CLFs are compatible with each other, namely at every state, there exists control actions that satisfy both the CBF and CLF constraints simultaneously. There exists some recent works that synthesized compatible CLF and CBF, but relying on nominal polynomial or rational controllers, which is just a sufficient but not necessary condition for compatibility. In this work, we investigate verification and synthesis of compatible CBF and CLF independent from any nominal controllers. We derive exact necessary and sufficient conditions for compatibility, and further formulate Sum-Of-Squares program for the compatibility verification. Based on our verification framework, we also design an alternating nominal-controller-free synthesis method. We evaluate our method in a linear toy, a non-linear toy, and a power converter example. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Stiffness-Tuneable Limb Segment with Flexible Spine for Malleable Robots

Authors: Angus B. Clark, Nicolas Rojas

Abstract: Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links… ▽ More Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links for these novel robotic manipulators; however, these solutions usually show a reduced performance when bending due to structural deformation. By including an inner support structure this deformation can be minimised, resulting in an increased stiffening performance. This paper presents a new multi-material spine-inspired flexible structure for providing support in stiffness-controllable layer-jamming-based robotic links of large diameter. The proposed spine mechanism is highly movable with type and range of motions that match those of a robotic link using solely layer jamming, whilst maintaining a hollow and light structure. The mechanics and design of the flexible spine are explored, and a prototype of a link utilising it is developed and compared with limb segments based on granular jamming and layer jamming without support structure. Results of experiments verify the advantages of the proposed design, demonstrating that it maintains a constant central diameter across bending angles and presents an improvement of more than 203% of resisting force at 180 degrees. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comments: 7 pages, 11 figures

Journal ref: 2019 International Conference on Robotics and Automation (ICRA), Montreal, QC, Canada, 2019, pp. 3969-3975

An Origami-Inspired Variable Friction Surface for Increasing the Dexterity of Robotic Grippers

Authors: Qiujie Lu, Angus B. Clark, Matthew Shen, Nicolas Rojas

Abstract: While the gras** capability of robotic grippers has shown significant development, the ability to manipulate objects within the hand is still limited. One explanation for this limitation is the lack of controlled contact variation between the grasped object and the gripper. For instance, human hands have the ability to firmly grip object surfaces, as well as slide over object faces, an aspect th… ▽ More While the gras** capability of robotic grippers has shown significant development, the ability to manipulate objects within the hand is still limited. One explanation for this limitation is the lack of controlled contact variation between the grasped object and the gripper. For instance, human hands have the ability to firmly grip object surfaces, as well as slide over object faces, an aspect that aids the enhanced manipulation of objects within the hand without losing contact. In this letter, we present a parametric, origami-inspired thin surface capable of transitioning between a high friction and a low friction state, suitable for implementation as an epidermis in robotic fingers. A numerical analysis of the proposed surface based on its design parameters, force analysis, and performance in in-hand manipulation tasks is presented. Through the development of a simple two-fingered two-degree-of-freedom gripper utilizing the proposed variable-friction surfaces with different parameters, we experimentally demonstrate the improved manipulation capabilities of the hand when compared to the same gripper without changeable friction. Results show that the pattern density and valley gap are the main parameters that effect the in-hand manipulation performance. The origami-inspired thin surface with a higher pattern density generated a smaller valley gap and smaller height change, producing a more stable improvement of the manipulation capabilities of the hand. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comments: 8 pages, 11 figures

Journal ref: IEEE Robotics and Automation Letters, vol. 5, no. 2, pp. 2538-2545, April 2020

Swarm Characteristics Classification Using Neural Networks

Authors: Donald W. Peltier III, Isaac Kaminer, Abram Clark, Marko Orescanin

Abstract: Understanding the characteristics of swarming autonomous agents is critical for defense and security applications. This article presents a study on using supervised neural network time series classification (NN TSC) to predict key attributes and tactics of swarming autonomous agents for military contexts. Specifically, NN TSC is applied to infer two binary attributes - communication and proportion… ▽ More Understanding the characteristics of swarming autonomous agents is critical for defense and security applications. This article presents a study on using supervised neural network time series classification (NN TSC) to predict key attributes and tactics of swarming autonomous agents for military contexts. Specifically, NN TSC is applied to infer two binary attributes - communication and proportional navigation - which combine to define four mutually exclusive swarm tactics. We identify a gap in literature on using NNs for swarm classification and demonstrate the effectiveness of NN TSC in rapidly deducing intelligence about attacking swarms to inform counter-maneuvers. Through simulated swarm-vs-swarm engagements, we evaluate NN TSC performance in terms of observation window requirements, noise robustness, and scalability to swarm size. Key findings show NNs can predict swarm behaviors with 97% accuracy using short observation windows of 20 time steps, while also demonstrating graceful degradation down to 80% accuracy under 50% noise, as well as excellent scalability to swarm sizes from 10 to 100 agents. These capabilities are promising for real-time decision-making support in defense scenarios by rapidly inferring insights about swarm behavior. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Learning a Formally Verified Control Barrier Function in Stochastic Environment

Authors: Manan Tayal, Hongchao Zhang, Pushpak Jagtap, Andrew Clark, Shishir Kolathaya

Abstract: Safety is a fundamental requirement of control systems. Control Barrier Functions (CBFs) are proposed to ensure the safety of the control system by constructing safety filters or synthesizing control inputs. However, the safety guarantee and performance of safe controllers rely on the construction of valid CBFs. Inspired by universal approximatability, CBFs are represented by neural networks, know… ▽ More Safety is a fundamental requirement of control systems. Control Barrier Functions (CBFs) are proposed to ensure the safety of the control system by constructing safety filters or synthesizing control inputs. However, the safety guarantee and performance of safe controllers rely on the construction of valid CBFs. Inspired by universal approximatability, CBFs are represented by neural networks, known as neural CBFs (NCBFs). This paper presents an algorithm for synthesizing formally verified continuous-time neural Control Barrier Functions in stochastic environments in a single step. The proposed training process ensures efficacy across the entire state space with only a finite number of data points by constructing a sample-based learning framework for Stochastic Neural CBFs (SNCBFs). Our methodology eliminates the need for post hoc verification by enforcing Lipschitz bounds on the neural network, its Jacobian, and Hessian terms. We demonstrate the effectiveness of our approach through case studies on the inverted pendulum system and obstacle avoidance in autonomous driving, showcasing larger safe regions compared to baseline methods. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: 8 pages, 3 figures

Semantics from Space: Satellite-Guided Thermal Semantic Segmentation Annotation for Aerial Field Robots

Authors: Connor Lee, Saraswati Soedarmadji, Matthew Anderson, Anthony J. Clark, Soon-Jo Chung

Abstract: We present a new method to automatically generate semantic segmentation annotations for thermal imagery captured from an aerial vehicle by utilizing satellite-derived data products alongside onboard global positioning and attitude estimates. This new capability overcomes the challenge of develo** thermal semantic perception algorithms for field robots due to the lack of annotated thermal field d… ▽ More We present a new method to automatically generate semantic segmentation annotations for thermal imagery captured from an aerial vehicle by utilizing satellite-derived data products alongside onboard global positioning and attitude estimates. This new capability overcomes the challenge of develo** thermal semantic perception algorithms for field robots due to the lack of annotated thermal field datasets and the time and costs of manual annotation, enabling precise and rapid annotation of thermal data from field collection efforts at a massively-parallelizable scale. By incorporating a thermal-conditioned refinement step with visual foundation models, our approach can produce highly-precise semantic segmentation labels using low-resolution satellite land cover data for little-to-no cost. It achieves 98.5% of the performance from using costly high-resolution options and demonstrates between 70-160% improvement over popular zero-shot semantic segmentation methods based on large vision-language models currently used for generating annotations for RGB imagery. Code will be available at: https://github.com/connorlee77/aerial-auto-segment. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Deep Few-view High-resolution Photon-counting Extremity CT at Halved Dose for a Clinical Trial

Authors: Mengzhou Li, Chuang Niu, Ge Wang, Maya R Amma, Krishna M Chapagain, Stefan Gabrielson, Andrew Li, Kevin Jonker, Niels de Ruiter, Jennifer A Clark, Phil Butler, Anthony Butler, Hengyong Yu

Abstract: The latest X-ray photon-counting computed tomography (PCCT) for extremity allows multi-energy high-resolution (HR) imaging for tissue characterization and material decomposition. However, both radiation dose and imaging speed need improvement for contrast-enhanced and other studies. Despite the success of deep learning methods for 2D few-view reconstruction, applying them to HR volumetric reconstr… ▽ More The latest X-ray photon-counting computed tomography (PCCT) for extremity allows multi-energy high-resolution (HR) imaging for tissue characterization and material decomposition. However, both radiation dose and imaging speed need improvement for contrast-enhanced and other studies. Despite the success of deep learning methods for 2D few-view reconstruction, applying them to HR volumetric reconstruction of extremity scans for clinical diagnosis has been limited due to GPU memory constraints, training data scarcity, and domain gap issues. In this paper, we propose a deep learning-based approach for PCCT image reconstruction at halved dose and doubled speed in a New Zealand clinical trial. Particularly, we present a patch-based volumetric refinement network to alleviate the GPU memory limitation, train network with synthetic data, and use model-based iterative refinement to bridge the gap between synthetic and real-world data. The simulation and phantom experiments demonstrate consistently improved results under different acquisition conditions on both in- and off-domain structures using a fixed network. The image quality of 8 patients from the clinical trial are evaluated by three radiologists in comparison with the standard image reconstruction with a full-view dataset. It is shown that our proposed approach is essentially identical to or better than the clinical benchmark in terms of diagnostic image quality scores. Our approach has a great potential to improve the safety and efficiency of PCCT without compromising image quality. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: 9 figures, 5 tables

Engineering consensus in static networks with unknown disruptors

Authors: Agathe Bouis, Christopher Lowe, Ruaridh A. Clark, Malcolm Macdonald

Abstract: Distributed control increases system scalability, flexibility, and redundancy. Foundational to such decentralisation is consensus formation, by which decision-making and coordination are achieved. However, decentralised multi-agent systems are inherently vulnerable to disruption. To develop a resilient consensus approach, inspiration is taken from the study of social systems and their dynamics; sp… ▽ More Distributed control increases system scalability, flexibility, and redundancy. Foundational to such decentralisation is consensus formation, by which decision-making and coordination are achieved. However, decentralised multi-agent systems are inherently vulnerable to disruption. To develop a resilient consensus approach, inspiration is taken from the study of social systems and their dynamics; specifically, the Deffuant Model. A dynamic algorithm is presented enabling efficient consensus to be reached with an unknown number of disruptors present within a multi-agent system. By inverting typical social tolerance, agents filter out extremist non-standard opinions that would drive them away from consensus. This approach allows distributed systems to deal with unknown disruptions, without knowledge of the network topology or the numbers and behaviours of the disruptors. A disruptor-agnostic algorithm is particularly suitable to real-world applications where this information is typically unknown. Faster and tighter convergence can be achieved across a range of scenarios with the social dynamics inspired algorithm, compared with standard Mean-Subsequence-Reduced-type methods. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: 21 pages, 5 figures

Fault Tolerant Neural Control Barrier Functions for Robotic Systems under Sensor Faults and Attacks

Authors: Hongchao Zhang, Luyao Niu, Andrew Clark, Radha Poovendran

Abstract: Safety is a fundamental requirement of many robotic systems. Control barrier function (CBF)-based approaches have been proposed to guarantee the safety of robotic systems. However, the effectiveness of these approaches highly relies on the choice of CBFs. Inspired by the universal approximation power of neural networks, there is a growing trend toward representing CBFs using neural networks, leadi… ▽ More Safety is a fundamental requirement of many robotic systems. Control barrier function (CBF)-based approaches have been proposed to guarantee the safety of robotic systems. However, the effectiveness of these approaches highly relies on the choice of CBFs. Inspired by the universal approximation power of neural networks, there is a growing trend toward representing CBFs using neural networks, leading to the notion of neural CBFs (NCBFs). Current NCBFs, however, are trained and deployed in benign environments, making them ineffective for scenarios where robotic systems experience sensor faults and attacks. In this paper, we study safety-critical control synthesis for robotic systems under sensor faults and attacks. Our main contribution is the development and synthesis of a new class of CBFs that we term fault tolerant neural control barrier function (FT-NCBF). We derive the necessary and sufficient conditions for FT-NCBFs to guarantee safety, and develop a data-driven method to learn FT-NCBFs by minimizing a loss function constructed using the derived conditions. Using the learned FT-NCBF, we synthesize a control input and formally prove the safety guarantee provided by our approach. We demonstrate our proposed approach using two case studies: obstacle avoidance problem for an autonomous mobile robot and spacecraft rendezvous problem, with code available via https://github.com/HongchaoZhang-HZ/FTNCBF. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Explicit Formula for Partial Information Decomposition

Authors: Aobo Lyu, Andrew Clark, Netanel Raviv

Abstract: Mutual information between two random variables is a well-studied notion, whose understanding is fairly complete. Mutual information between one random variable and a pair of other random variables, however, is a far more involved notion. Specifically, Shannon's mutual information does not capture fine-grained interactions between those three variables, resulting in limited insights in complex sys… ▽ More Mutual information between two random variables is a well-studied notion, whose understanding is fairly complete. Mutual information between one random variable and a pair of other random variables, however, is a far more involved notion. Specifically, Shannon's mutual information does not capture fine-grained interactions between those three variables, resulting in limited insights in complex systems. To capture these fine-grained interactions, in 2010 Williams and Beer proposed to decompose this mutual information to information atoms, called unique, redundant, and synergistic, and proposed several operational axioms that these atoms must satisfy. In spite of numerous efforts, a general formula which satisfies these axioms has yet to be found. Inspired by Judea Pearl's do-calculus, we resolve this open problem by introducing the do-operation, an operation over the variable system which sets a certain marginal to a desired value, which is distinct from any existing approaches. Using this operation, we provide the first explicit formula for calculating the information atoms so that Williams and Beer's axioms are satisfied, as well as additional properties from subsequent studies in the field. △ Less

Submitted 7 May, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Almost-Sure Safety Guarantees of Stochastic Zero-Control Barrier Functions Do Not Hold

Authors: Oswin So, Andrew Clark, Chuchu Fan

Abstract: The 2021 paper "Control barrier functions for stochastic systems" provides theorems that give almost sure safety guarantees given stochastic zero control barrier function (ZCBF). Unfortunately, both the theorem and its proof is invalid. In this letter, we illustrate on a toy example that the almost sure safety guarantees for stochastic ZCBF do not hold and explain why the proof is flawed. Although… ▽ More The 2021 paper "Control barrier functions for stochastic systems" provides theorems that give almost sure safety guarantees given stochastic zero control barrier function (ZCBF). Unfortunately, both the theorem and its proof is invalid. In this letter, we illustrate on a toy example that the almost sure safety guarantees for stochastic ZCBF do not hold and explain why the proof is flawed. Although stochastic reciprocal barrier functions (RCBF) also uses the same proof technique, we provide a different proof technique that verifies that stochastic RCBFs are indeed safe with probability one. Using the RCBF, we derive a modified ZCBF condition that guarantees safety with probability one. Finally, we provide some discussion on the role of unbounded controls in the almost-sure safety guarantees of RCBFs, and show that the rate of divergence of the ratio of the drift and diffusion is the key for whether a system has almost sure safety guarantees. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Comments: Under Review

SPLAIN: Augmenting Cybersecurity Warnings with Reasons and Data

Authors: Vera A. Kazakova, Jena D. Hwang, Bonnie J. Dorr, Yorick Wilks, J. Blake Gage, Alex Memory, Mark A. Clark

Abstract: Effective cyber threat recognition and prevention demand comprehensible forecasting systems, as prior approaches commonly offer limited and, ultimately, unconvincing information. We introduce Simplified Plaintext Language (SPLAIN), a natural language generator that converts warning data into user-friendly cyber threat explanations. SPLAIN is designed to generate clear, actionable outputs, incorpor… ▽ More Effective cyber threat recognition and prevention demand comprehensible forecasting systems, as prior approaches commonly offer limited and, ultimately, unconvincing information. We introduce Simplified Plaintext Language (SPLAIN), a natural language generator that converts warning data into user-friendly cyber threat explanations. SPLAIN is designed to generate clear, actionable outputs, incorporating hierarchically organized explanatory details about input data and system functionality. Given the inputs of individual sensor-induced forecasting signals and an overall warning from a fusion module, SPLAIN queries each signal for information on contributing sensors and data signals. This collected data is processed into a coherent English explanation, encompassing forecasting, sensing, and data elements for user review. SPLAIN's template-based approach ensures consistent warning structure and vocabulary. SPLAIN's hierarchical output structure allows each threat and its components to be expanded to reveal underlying explanations on demand. Our conclusions emphasize the need for designers to specify the "how" and "why" behind cyber warnings, advocate for simple structured templates in generating consistent explanations, and recognize that direct causal links in Machine Learning approaches may not always be identifiable, requiring some explanations to focus on general methodologies, such as model and training data. △ Less

Submitted 18 November, 2023; originally announced November 2023.

Comments: Presented at FLAIRS-2019 as poster (see ancillary files)

ACM Class: I.2

Journal ref: FLAIRS-2019

Accelerating Dedispersion using Many-Core Architectures

Authors: Jan Novotný, Karel Adámek, M. A. Clark, Mike Giles, Wesley Armour

Abstract: Astrophysical radio signals are excellent probes of extreme physical processes that emit them. However, to reach Earth, electromagnetic radiation passes through the ionised interstellar medium (ISM), introducing a frequency-dependent time delay (dispersion) to the emitted signal. Removing dispersion enables searches for transient signals like Fast Radio Bursts (FRB) or repeating signals from isola… ▽ More Astrophysical radio signals are excellent probes of extreme physical processes that emit them. However, to reach Earth, electromagnetic radiation passes through the ionised interstellar medium (ISM), introducing a frequency-dependent time delay (dispersion) to the emitted signal. Removing dispersion enables searches for transient signals like Fast Radio Bursts (FRB) or repeating signals from isolated pulsars or those in orbit around other compact objects. The sheer volume and high resolution of data that next generation radio telescopes will produce require High-Performance Computing (HPC) solutions and algorithms to be used in time-domain data processing pipelines to extract scientifically valuable results in real-time. This paper presents a state-of-the-art implementation of brute force incoherent dedispersion on NVIDIA GPUs, and on Intel and AMD CPUs. We show that our implementation is 4x faster (8-bit 8192 channels input) than other available solutions and demonstrate, using 11 existing telescopes, that our implementation is at least 20 faster than real-time. This work is part of the AstroAccelerate package. △ Less

Submitted 9 November, 2023; originally announced November 2023.

Journal ref: The Astrophysical Journal Supplement Series, Volume 269, Number 1, 2023

Exact Verification of ReLU Neural Control Barrier Functions

Authors: Hongchao Zhang, Junlin Wu, Yevgeniy Vorobeychik, Andrew Clark

Abstract: Control Barrier Functions (CBFs) are a popular approach for safe control of nonlinear systems. In CBF-based control, the desired safety properties of the system are mapped to nonnegativity of a CBF, and the control input is chosen to ensure that the CBF remains nonnegative for all time. Recently, machine learning methods that represent CBFs as neural networks (neural control barrier functions, or… ▽ More Control Barrier Functions (CBFs) are a popular approach for safe control of nonlinear systems. In CBF-based control, the desired safety properties of the system are mapped to nonnegativity of a CBF, and the control input is chosen to ensure that the CBF remains nonnegative for all time. Recently, machine learning methods that represent CBFs as neural networks (neural control barrier functions, or NCBFs) have shown great promise due to the universal representability of neural networks. However, verifying that a learned CBF guarantees safety remains a challenging research problem. This paper presents novel exact conditions and algorithms for verifying safety of feedforward NCBFs with ReLU activation functions. The key challenge in doing so is that, due to the piecewise linearity of the ReLU function, the NCBF will be nondifferentiable at certain points, thus invalidating traditional safety verification methods that assume a smooth barrier function. We resolve this issue by leveraging a generalization of Nagumo's theorem for proving invariance of sets with nonsmooth boundaries to derive necessary and sufficient conditions for safety. Based on this condition, we propose an algorithm for safety verification of NCBFs that first decomposes the NCBF into piecewise linear segments and then solves a nonlinear program to verify safety of each segment as well as the intersections of the linear segments. We mitigate the complexity by only considering the boundary of the safe region and by pruning the segments with Interval Bound Propagation (IBP) and linear relaxation. We evaluate our approach through numerical studies with comparison to state-of-the-art SMT-based methods. Our code is available at https://github.com/HongchaoZhang-HZ/exactverif-reluncbf-nips23. △ Less

Submitted 13 October, 2023; originally announced October 2023.

AIDPS:Adaptive Intrusion Detection and Prevention System for Underwater Acoustic Sensor Networks

Authors: Soumadeep Das, Aryan Mohammadi Pasikhani, Prosanta Gope, John A. Clark, Chintan Patel, Biplab Sikdar

Abstract: Underwater Acoustic Sensor Networks (UW-ASNs) are predominantly used for underwater environments and find applications in many areas. However, a lack of security considerations, the unstable and challenging nature of the underwater environment, and the resource-constrained nature of the sensor nodes used for UW-ASNs (which makes them incapable of adopting security primitives) make the UW-ASN prone… ▽ More Underwater Acoustic Sensor Networks (UW-ASNs) are predominantly used for underwater environments and find applications in many areas. However, a lack of security considerations, the unstable and challenging nature of the underwater environment, and the resource-constrained nature of the sensor nodes used for UW-ASNs (which makes them incapable of adopting security primitives) make the UW-ASN prone to vulnerabilities. This paper proposes an Adaptive decentralised Intrusion Detection and Prevention System called AIDPS for UW-ASNs. The proposed AIDPS can improve the security of the UW-ASNs so that they can efficiently detect underwater-related attacks (e.g., blackhole, grayhole and flooding attacks). To determine the most effective configuration of the proposed construction, we conduct a number of experiments using several state-of-the-art machine learning algorithms (e.g., Adaptive Random Forest (ARF), light gradient-boosting machine, and K-nearest neighbours) and concept drift detection algorithms (e.g., ADWIN, kdqTree, and Page-Hinkley). Our experimental results show that incremental ARF using ADWIN provides optimal performance when implemented with One-class support vector machine (SVM) anomaly-based detectors. Furthermore, our extensive evaluation results also show that the proposed scheme outperforms state-of-the-art bench-marking methods while providing a wider range of desirable features such as scalability and complexity. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Observation of high-energy neutrinos from the Galactic plane

Authors: R. Abbasi, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, J. M. Alameddine, A. A. Alves Jr., N. M. Amin, K. Andeen, T. Anderson, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, S. Axani, X. Bai, A. Balagopal V., S. W. Barwick, V. Basu, S. Baur, R. Bay, J. J. Beatty, K. -H. Becker, J. Becker Tjus , et al. (364 additional authors not shown)

Abstract: The origin of high-energy cosmic rays, atomic nuclei that continuously impact Earth's atmosphere, has been a mystery for over a century. Due to deflection in interstellar magnetic fields, cosmic rays from the Milky Way arrive at Earth from random directions. However, near their sources and during propagation, cosmic rays interact with matter and produce high-energy neutrinos. We search for neutrin… ▽ More The origin of high-energy cosmic rays, atomic nuclei that continuously impact Earth's atmosphere, has been a mystery for over a century. Due to deflection in interstellar magnetic fields, cosmic rays from the Milky Way arrive at Earth from random directions. However, near their sources and during propagation, cosmic rays interact with matter and produce high-energy neutrinos. We search for neutrino emission using machine learning techniques applied to ten years of data from the IceCube Neutrino Observatory. We identify neutrino emission from the Galactic plane at the 4.5$σ$ level of significance, by comparing diffuse emission models to a background-only hypothesis. The signal is consistent with modeled diffuse emission from the Galactic plane, but could also arise from a population of unresolved point sources. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Comments: Submitted on May 12th, 2022; Accepted on May 4th, 2023

Journal ref: Science 380, 6652, 1338-1343 (2023)

System Information Decomposition

Authors: Aobo Lyu, Bing Yuan, Ou Deng, Mingzhe Yang, Andrew Clark, Jiang Zhang

Abstract: To characterize the complex higher-order interactions among variables within a system, this study introduces a novel framework, termed System Information Decomposition (SID), aimed at decomposing the information entropy of variables into information atoms based on their interrelations. Diverging from the established Partial Information Decomposition (PID) framework, which predominantly concentrate… ▽ More To characterize the complex higher-order interactions among variables within a system, this study introduces a novel framework, termed System Information Decomposition (SID), aimed at decomposing the information entropy of variables into information atoms based on their interrelations. Diverging from the established Partial Information Decomposition (PID) framework, which predominantly concentrates on the directional interactions stemming from an array of source variables to a single target variable, SID adopts a holistic approach, scrutinizing the interactions across all variables within the system. Specifically, we proved all the information atoms are symmetric, which means the disentanglement of unique, redundant, and synergistic information from any specific target variable. Hence, our proposed SID framework can capture the symmetric pairwise and higher-order relationships among variables. This advance positions SID as a promising framework with the potential to foster a deeper understanding of higher-order relationships within complex systems across disciplines. △ Less

Submitted 1 November, 2023; v1 submitted 14 June, 2023; originally announced June 2023.

Neural Lyapunov Control for Discrete-Time Systems

Authors: Junlin Wu, Andrew Clark, Yiannis Kantaros, Yevgeniy Vorobeychik

Abstract: While ensuring stability for linear systems is well understood, it remains a major challenge for nonlinear systems. A general approach in such cases is to compute a combination of a Lyapunov function and an associated control policy. However, finding Lyapunov functions for general nonlinear systems is a challenging task. To address this challenge, several methods have been proposed that represent… ▽ More While ensuring stability for linear systems is well understood, it remains a major challenge for nonlinear systems. A general approach in such cases is to compute a combination of a Lyapunov function and an associated control policy. However, finding Lyapunov functions for general nonlinear systems is a challenging task. To address this challenge, several methods have been proposed that represent Lyapunov functions using neural networks. However, such approaches either focus on continuous-time systems, or highly restricted classes of nonlinear dynamics. We propose the first approach for learning neural Lyapunov control in a broad class of discrete-time systems. Three key ingredients enable us to effectively learn provably stable control policies. The first is a novel mixed-integer linear programming approach for verifying the discrete-time Lyapunov stability conditions, leveraging the particular structure of these conditions. The second is a novel approach for computing verified sublevel sets. The third is a heuristic gradient-based method for quickly finding counterexamples to significantly speed up Lyapunov function learning. Our experiments on four standard benchmarks demonstrate that our approach significantly outperforms state-of-the-art baselines. For example, on the path tracking benchmark, we outperform recent neural Lyapunov control baselines by an order of magnitude in both running time and the size of the region of attraction, and on two of the four benchmarks (cartpole and PVTOL), ours is the first automated approach to return a provably stable controller. Our code is available at: https://github.com/jlwu002/nlc_discrete. △ Less

Submitted 24 December, 2023; v1 submitted 10 May, 2023; originally announced May 2023.

Comments: NeurIPS 2023

Pre-processing training data improves accuracy and generalisability of convolutional neural network based landscape semantic segmentation

Authors: Andrew Clark, Stuart Phinn, Peter Scarth

Abstract: In this paper, we trialled different methods of data preparation for Convolutional Neural Network (CNN) training and semantic segmentation of land use land cover (LULC) features within aerial photography over the Wet Tropics and Atherton Tablelands, Queensland, Australia. This was conducted through trialling and ranking various training patch selection sampling strategies, patch and batch sizes an… ▽ More In this paper, we trialled different methods of data preparation for Convolutional Neural Network (CNN) training and semantic segmentation of land use land cover (LULC) features within aerial photography over the Wet Tropics and Atherton Tablelands, Queensland, Australia. This was conducted through trialling and ranking various training patch selection sampling strategies, patch and batch sizes and data augmentations and scaling. We also compared model accuracy through producing the LULC classification using a single pass of a grid of patches and averaging multiple grid passes and three rotated version of each patch. Our results showed: a stratified random sampling approach for producing training patches improved the accuracy of classes with a smaller area while having minimal effect on larger classes; a smaller number of larger patches compared to a larger number of smaller patches improves model accuracy; applying data augmentations and scaling are imperative in creating a generalised model able to accurately classify LULC features in imagery from a different date and sensor; and producing the output classification by averaging multiple grids of patches and three rotated versions of each patch produced and more accurate and aesthetic result. Combining the findings from the trials, we fully trained five models on the 2018 training image and applied the model to the 2015 test image with the output LULC classifications achieving an average kappa of 0.84 user accuracy of 0.81 and producer accuracy of 0.87. This study has demonstrated the importance of data pre-processing for develo** a generalised deep-learning model for LULC classification which can be applied to a different date and sensor. Future research using CNN and earth observation data should implement the findings of this study to increase LULC model accuracy and transferability. △ Less

Submitted 28 April, 2023; originally announced April 2023.

Risk-Aware Distributed Multi-Agent Reinforcement Learning

Authors: Abdullah Al Maruf, Luyao Niu, Bhaskar Ramasubramanian, Andrew Clark, Radha Poovendran

Abstract: Autonomous cyber and cyber-physical systems need to perform decision-making, learning, and control in unknown environments. Such decision-making can be sensitive to multiple factors, including modeling errors, changes in costs, and impacts of events in the tails of probability distributions. Although multi-agent reinforcement learning (MARL) provides a framework for learning behaviors through repe… ▽ More Autonomous cyber and cyber-physical systems need to perform decision-making, learning, and control in unknown environments. Such decision-making can be sensitive to multiple factors, including modeling errors, changes in costs, and impacts of events in the tails of probability distributions. Although multi-agent reinforcement learning (MARL) provides a framework for learning behaviors through repeated interactions with the environment by minimizing an average cost, it will not be adequate to overcome the above challenges. In this paper, we develop a distributed MARL approach to solve decision-making problems in unknown environments by learning risk-aware actions. We use the conditional value-at-risk (CVaR) to characterize the cost function that is being minimized, and define a Bellman operator to characterize the value function associated to a given state-action pair. We prove that this operator satisfies a contraction property, and that it converges to the optimal value function. We then propose a distributed MARL algorithm called the CVaR QD-Learning algorithm, and establish that value functions of individual agents reaches consensus. We identify several challenges that arise in the implementation of the CVaR QD-Learning algorithm, and present solutions to overcome these. We evaluate the CVaR QD-Learning algorithm through simulations, and demonstrate the effect of a risk parameter on value functions at consensus. △ Less

Submitted 4 April, 2023; originally announced April 2023.

A Privacy-Preserving Energy Theft Detection Model for Effective Demand-Response Management in Smart Grids

Authors: Arwa Alromih, John A. Clark, Prosanta Gope

Abstract: The detection of energy thefts is vital for the safety of the whole smart grid system. However, the detection alone is not enough since energy thefts can crucially affect the electricity supply leading to some blackouts. Moreover, privacy is one of the major challenges that must be preserved when dealing with clients' energy data. This is often overlooked in energy theft detection research as most… ▽ More The detection of energy thefts is vital for the safety of the whole smart grid system. However, the detection alone is not enough since energy thefts can crucially affect the electricity supply leading to some blackouts. Moreover, privacy is one of the major challenges that must be preserved when dealing with clients' energy data. This is often overlooked in energy theft detection research as most current detection techniques rely on raw, unencrypted data, which may potentially expose sensitive and personal data. To solve this issue, we present a privacy-preserving energy theft detection technique with effective demand management that employs two layers of privacy protection. We explore a split learning mechanism that trains a detection model in a decentralised fashion without the need to exchange raw data. We also employ a second layer of privacy by the use of a masking scheme to mask clients' outputs in order to prevent inference attacks. A privacy-enhanced version of this mechanism also employs an additional layer of privacy protection by training a randomisation layer at the end of the client-side model. This is done to make the output as random as possible without compromising the detection performance. For the energy theft detection part, we design a multi-output machine learning model to identify energy thefts, estimate their volume, and effectively predict future demand. Finally, we use a comprehensive set of experiments to test our proposed scheme. The experimental results show that our scheme achieves high detection accuracy and greatly improves the privacy preservation degree. △ Less

Submitted 23 March, 2023; originally announced March 2023.

Domain Generalization for Robust Model-Based Offline Reinforcement Learning

Authors: Alan Clark, Shoaib Ahmed Siddiqui, Robert Kirk, Usman Anwar, Stephen Chung, David Krueger

Abstract: Existing offline reinforcement learning (RL) algorithms typically assume that training data is either: 1) generated by a known policy, or 2) of entirely unknown origin. We consider multi-demonstrator offline RL, a middle ground where we know which demonstrators generated each dataset, but make no assumptions about the underlying policies of the demonstrators. This is the most natural setting when… ▽ More Existing offline reinforcement learning (RL) algorithms typically assume that training data is either: 1) generated by a known policy, or 2) of entirely unknown origin. We consider multi-demonstrator offline RL, a middle ground where we know which demonstrators generated each dataset, but make no assumptions about the underlying policies of the demonstrators. This is the most natural setting when collecting data from multiple human operators, yet remains unexplored. Since different demonstrators induce different data distributions, we show that this can be naturally framed as a domain generalization problem, with each demonstrator corresponding to a different domain. Specifically, we propose Domain-Invariant Model-based Offline RL (DIMORL), where we apply Risk Extrapolation (REx) (Krueger et al., 2020) to the process of learning dynamics and rewards models. Our results show that models trained with REx exhibit improved domain generalization performance when compared with the natural baseline of pooling all demonstrators' data. We observe that the resulting models frequently enable the learning of superior policies in the offline model-based RL setting, can improve the stability of the policy learning process, and potentially enable increased exploration. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Comments: Accepted to the NeurIPS 2022 Workshops on Distribution Shifts and Offline Reinforcement Learning

Spherical convolutional neural networks can improve brain microstructure estimation from diffusion MRI data

Authors: Leevi Kerkelä, Kiran Seunarine, Filip Szczepankiewicz, Chris A. Clark

Abstract: Diffusion magnetic resonance imaging is sensitive to the microstructural properties of brain tissue. However, estimating clinically and scientifically relevant microstructural properties from the measured signals remains a highly challenging inverse problem that machine learning may help solve. This study investigated if recently developed rotationally invariant spherical convolutional neural netw… ▽ More Diffusion magnetic resonance imaging is sensitive to the microstructural properties of brain tissue. However, estimating clinically and scientifically relevant microstructural properties from the measured signals remains a highly challenging inverse problem that machine learning may help solve. This study investigated if recently developed rotationally invariant spherical convolutional neural networks can improve microstructural parameter estimation. We trained a spherical convolutional neural network to predict the ground-truth parameter values from efficiently simulated noisy data and applied the trained network to imaging data acquired in a clinical setting to generate microstructural parameter maps. Our network performed better than the spherical mean technique and multi-layer perceptron, achieving higher prediction accuracy than the spherical mean technique with less rotational variance than the multi-layer perceptron. Although we focused on a constrained two-compartment model of neuronal tissue, the network and training pipeline are generalizable and can be used to estimate the parameters of any Gaussian compartment model. To highlight this, we also trained the network to predict the parameters of a three-compartment model that enables the estimation of apparent neural soma density using tensor-valued diffusion encoding. △ Less

Submitted 26 February, 2024; v1 submitted 17 November, 2022; originally announced November 2022.

Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube

Authors: R. Abbasi, M. Ackermann, J. Adams, N. Aggarwal, J. A. Aguilar, M. Ahlers, M. Ahrens, J. M. Alameddine, A. A. Alves Jr., N. M. Amin, K. Andeen, T. Anderson, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, S. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, V. Basu, R. Bay, J. J. Beatty, K. -H. Becker , et al. (359 additional authors not shown)

Abstract: IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen… ▽ More IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events. △ Less

Submitted 11 October, 2022; v1 submitted 7 September, 2022; originally announced September 2022.

Comments: Prepared for submission to JINST

Testing Causality in Scientific Modelling Software

Authors: Andrew G. Clark, Michael Foster, Benedikt Prifling, Neil Walkinshaw, Robert M. Hierons, Volker Schmidt, Robert D. Turner

Abstract: From simulating galaxy formation to viral transmission in a pandemic, scientific models play a pivotal role in develo** scientific theories and supporting government policy decisions that affect us all. Given these critical applications, a poor modelling assumption or bug could have far-reaching consequences. However, scientific models possess several properties that make them notoriously diffic… ▽ More From simulating galaxy formation to viral transmission in a pandemic, scientific models play a pivotal role in develo** scientific theories and supporting government policy decisions that affect us all. Given these critical applications, a poor modelling assumption or bug could have far-reaching consequences. However, scientific models possess several properties that make them notoriously difficult to test, including a complex input space, long execution times, and non-determinism, rendering existing testing techniques impractical. In fields such as epidemiology, where researchers seek answers to challenging causal questions, a statistical methodology known as Causal Inference has addressed similar problems, enabling the inference of causal conclusions from noisy, biased, and sparse data instead of costly experiments. This paper introduces the Causal Testing Framework: a framework that uses Causal Inference techniques to establish causal effects from existing data, enabling users to conduct software testing activities concerning the effect of a change, such as Metamorphic Testing, a posteriori. We present three case studies covering real-world scientific models, demonstrating how the Causal Testing Framework can infer metamorphic test outcomes from reused, confounded test data to provide an efficient solution for testing scientific modelling software. △ Less

Submitted 30 June, 2023; v1 submitted 1 September, 2022; originally announced September 2022.

ACM Class: D.2.5; I.6.4

E2PN: Efficient SE(3)-Equivariant Point Network

Authors: Minghan Zhu, Maani Ghaffari, William A. Clark, Huei Peng

Abstract: This paper proposes a convolution structure for learning SE(3)-equivariant features from 3D point clouds. It can be viewed as an equivariant version of kernel point convolutions (KPConv), a widely used convolution form to process point cloud data. Compared with existing equivariant networks, our design is simple, lightweight, fast, and easy to be integrated with existing task-specific point cloud… ▽ More This paper proposes a convolution structure for learning SE(3)-equivariant features from 3D point clouds. It can be viewed as an equivariant version of kernel point convolutions (KPConv), a widely used convolution form to process point cloud data. Compared with existing equivariant networks, our design is simple, lightweight, fast, and easy to be integrated with existing task-specific point cloud learning pipelines. We achieve these desirable properties by combining group convolutions and quotient representations. Specifically, we discretize SO(3) to finite groups for their simplicity while using SO(2) as the stabilizer subgroup to form spherical quotient feature fields to save computations. We also propose a permutation layer to recover SO(3) features from spherical features to preserve the capacity to distinguish rotations. Experiments show that our method achieves comparable or superior performance in various tasks, including object classification, pose estimation, and keypoint-matching, while consuming much less memory and running faster than existing work. The proposed method can foster the development of equivariant models for real-world applications based on point clouds. △ Less

Submitted 13 June, 2023; v1 submitted 10 June, 2022; originally announced June 2022.

Comments: CVPR 2023, 16 pages. See https://github.com/minghanz/E2PN for code

Electrically pumped quantum-dot lasers grown on 300 mm patterned Si photonic wafers

Authors: Chen Shang, Kaiyin Feng, Eamonn T. Hughes, Andrew Clark, Mukul Debnath, Rosalyn Koscica, Gerald Leake, Joshua Herman, David Harame, Peter Ludewig, Yating Wan, John E. Bowers

Abstract: Monolithic integration of quantum dot (QD) gain materials onto Si photonic platforms via direct epitaxial growth is a promising solution for on-chip light sources. Recent developments have demonstrated superior device reliability in blanket hetero-epitaxy of III-V devices on Si at elevated temperatures. Yet, thick, defect management epi designs prevent vertical light coupling from the gain region… ▽ More Monolithic integration of quantum dot (QD) gain materials onto Si photonic platforms via direct epitaxial growth is a promising solution for on-chip light sources. Recent developments have demonstrated superior device reliability in blanket hetero-epitaxy of III-V devices on Si at elevated temperatures. Yet, thick, defect management epi designs prevent vertical light coupling from the gain region to the Si-on-Insulator (SOI) waveguides. Here, we demonstrate the first electrically pumped QD lasers grown on a 300 mm patterned (001) Si wafer with a butt-coupled configuration by molecular beam epitaxy (MBE). Unique growth and fabrication challenges imposed by the template architecture have been resolved, contributing to continuous wave lasing to 60 °C and a maximum double-side output power of 126.6 mW at 20 °C with a double-side wall plug efficiency of 8.6%. The potential for robust on-chip laser operation and efficient low-loss light coupling to Si photonic circuits makes this heteroepitaxial integration platform on Si promising for scalable and low-cost mass production. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 11 pages including references, 6 figures

Adaptive Hybrid Heterogeneous IDS for 6LoWPAN

Authors: Aryan Mohammadi Pasikhani, John A Clark, Prosanta Gope

Abstract: IPv6 over Low-powered Wireless Personal Area Networks (6LoWPAN) have grown in importance in recent years, with the Routing Protocol for Low Power and Lossy Networks (RPL) emerging as a major enabler. However, RPL can be subject to attack, with severe consequences. Most proposed IDSs have been limited to specific RPL attacks and typically assume a stationary environment. In this article, we propose… ▽ More IPv6 over Low-powered Wireless Personal Area Networks (6LoWPAN) have grown in importance in recent years, with the Routing Protocol for Low Power and Lossy Networks (RPL) emerging as a major enabler. However, RPL can be subject to attack, with severe consequences. Most proposed IDSs have been limited to specific RPL attacks and typically assume a stationary environment. In this article, we propose the first adaptive hybrid IDS to efficiently detect and identify a wide range of RPL attacks (including DIO Suppression, Increase Rank, and Worst Parent attacks, which have been overlooked in the literature) in evolving data environments. We apply our framework to networks under various levels of node mobility and maliciousness. We experiment with several incremental machine learning (ML) approaches and various 'concept-drift detection' mechanisms (e.g. ADWIN, DDM, and EDDM) to determine the best underlying settings for the proposed scheme. △ Less

Submitted 18 May, 2022; originally announced May 2022.

Training Compute-Optimal Large Language Models

Authors: Jordan Hoffmann, Sebastian Borgeaud, Arthur Mensch, Elena Buchatskaya, Trevor Cai, Eliza Rutherford, Diego de Las Casas, Lisa Anne Hendricks, Johannes Welbl, Aidan Clark, Tom Hennigan, Eric Noland, Katie Millican, George van den Driessche, Bogdan Damoc, Aurelia Guy, Simon Osindero, Karen Simonyan, Erich Elsen, Jack W. Rae, Oriol Vinyals, Laurent Sifre

Abstract: We investigate the optimal model size and number of tokens for training a transformer language model under a given compute budget. We find that current large language models are significantly undertrained, a consequence of the recent focus on scaling language models whilst kee** the amount of training data constant. By training over 400 language models ranging from 70 million to over 16 billion… ▽ More We investigate the optimal model size and number of tokens for training a transformer language model under a given compute budget. We find that current large language models are significantly undertrained, a consequence of the recent focus on scaling language models whilst kee** the amount of training data constant. By training over 400 language models ranging from 70 million to over 16 billion parameters on 5 to 500 billion tokens, we find that for compute-optimal training, the model size and the number of training tokens should be scaled equally: for every doubling of model size the number of training tokens should also be doubled. We test this hypothesis by training a predicted compute-optimal model, Chinchilla, that uses the same compute budget as Gopher but with 70B parameters and 4$\times$ more more data. Chinchilla uniformly and significantly outperforms Gopher (280B), GPT-3 (175B), Jurassic-1 (178B), and Megatron-Turing NLG (530B) on a large range of downstream evaluation tasks. This also means that Chinchilla uses substantially less compute for fine-tuning and inference, greatly facilitating downstream usage. As a highlight, Chinchilla reaches a state-of-the-art average accuracy of 67.5% on the MMLU benchmark, greater than a 7% improvement over Gopher. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Unified Scaling Laws for Routed Language Models

Authors: Aidan Clark, Diego de las Casas, Aurelia Guy, Arthur Mensch, Michela Paganini, Jordan Hoffmann, Bogdan Damoc, Blake Hechtman, Trevor Cai, Sebastian Borgeaud, George van den Driessche, Eliza Rutherford, Tom Hennigan, Matthew Johnson, Katie Millican, Albin Cassirer, Chris Jones, Elena Buchatskaya, David Budden, Laurent Sifre, Simon Osindero, Oriol Vinyals, Jack Rae, Erich Elsen, Koray Kavukcuoglu , et al. (1 additional authors not shown)

Abstract: The performance of a language model has been shown to be effectively modeled as a power-law in its parameter count. Here we study the scaling behaviors of Routing Networks: architectures that conditionally use only a subset of their parameters while processing an input. For these models, parameter count and computational requirement form two independent axes along which an increase leads to better… ▽ More The performance of a language model has been shown to be effectively modeled as a power-law in its parameter count. Here we study the scaling behaviors of Routing Networks: architectures that conditionally use only a subset of their parameters while processing an input. For these models, parameter count and computational requirement form two independent axes along which an increase leads to better performance. In this work we derive and justify scaling laws defined on these two variables which generalize those known for standard language models and describe the performance of a wide range of routing architectures trained via three different techniques. Afterwards we provide two applications of these laws: first deriving an Effective Parameter Count along which all models scale at the same rate, and then using the scaling coefficients to give a quantitative comparison of the three routing techniques considered. Our analysis derives from an extensive evaluation of Routing Networks across five orders of magnitude of size, including models with hundreds of experts and hundreds of billions of parameters. △ Less

Submitted 9 February, 2022; v1 submitted 2 February, 2022; originally announced February 2022.

Comments: Fixing typos and affiliation clarity

Scaling Language Models: Methods, Analysis & Insights from Training Gopher

Authors: Jack W. Rae, Sebastian Borgeaud, Trevor Cai, Katie Millican, Jordan Hoffmann, Francis Song, John Aslanides, Sarah Henderson, Roman Ring, Susannah Young, Eliza Rutherford, Tom Hennigan, Jacob Menick, Albin Cassirer, Richard Powell, George van den Driessche, Lisa Anne Hendricks, Maribeth Rauh, Po-Sen Huang, Amelia Glaese, Johannes Welbl, Sumanth Dathathri, Saffron Huang, Jonathan Uesato, John Mellor , et al. (55 additional authors not shown)

Abstract: Language modelling provides a step towards intelligent communication systems by harnessing large repositories of written human knowledge to better predict and understand the world. In this paper, we present an analysis of Transformer-based language model performance across a wide range of model scales -- from models with tens of millions of parameters up to a 280 billion parameter model called Gop… ▽ More Language modelling provides a step towards intelligent communication systems by harnessing large repositories of written human knowledge to better predict and understand the world. In this paper, we present an analysis of Transformer-based language model performance across a wide range of model scales -- from models with tens of millions of parameters up to a 280 billion parameter model called Gopher. These models are evaluated on 152 diverse tasks, achieving state-of-the-art performance across the majority. Gains from scale are largest in areas such as reading comprehension, fact-checking, and the identification of toxic language, but logical and mathematical reasoning see less benefit. We provide a holistic analysis of the training dataset and model's behaviour, covering the intersection of model scale with bias and toxicity. Finally we discuss the application of language models to AI safety and the mitigation of downstream harms. △ Less

Submitted 21 January, 2022; v1 submitted 8 December, 2021; originally announced December 2021.

Comments: 120 pages

Improving language models by retrieving from trillions of tokens

Authors: Sebastian Borgeaud, Arthur Mensch, Jordan Hoffmann, Trevor Cai, Eliza Rutherford, Katie Millican, George van den Driessche, Jean-Baptiste Lespiau, Bogdan Damoc, Aidan Clark, Diego de Las Casas, Aurelia Guy, Jacob Menick, Roman Ring, Tom Hennigan, Saffron Huang, Loren Maggiore, Chris Jones, Albin Cassirer, Andy Brock, Michela Paganini, Geoffrey Irving, Oriol Vinyals, Simon Osindero, Karen Simonyan , et al. (3 additional authors not shown)

Abstract: We enhance auto-regressive language models by conditioning on document chunks retrieved from a large corpus, based on local similarity with preceding tokens. With a $2$ trillion token database, our Retrieval-Enhanced Transformer (RETRO) obtains comparable performance to GPT-3 and Jurassic-1 on the Pile, despite using 25$\times$ fewer parameters. After fine-tuning, RETRO performance translates to d… ▽ More We enhance auto-regressive language models by conditioning on document chunks retrieved from a large corpus, based on local similarity with preceding tokens. With a $2$ trillion token database, our Retrieval-Enhanced Transformer (RETRO) obtains comparable performance to GPT-3 and Jurassic-1 on the Pile, despite using 25$\times$ fewer parameters. After fine-tuning, RETRO performance translates to downstream knowledge-intensive tasks such as question answering. RETRO combines a frozen Bert retriever, a differentiable encoder and a chunked cross-attention mechanism to predict tokens based on an order of magnitude more data than what is typically consumed during training. We typically train RETRO from scratch, yet can also rapidly RETROfit pre-trained transformers with retrieval and still achieve good performance. Our work opens up new avenues for improving language models through explicit memory at unprecedented scale. △ Less

Submitted 7 February, 2022; v1 submitted 8 December, 2021; originally announced December 2021.

Comments: Fix incorrect reported numbers in Table 14

Multipoint-to-point data aggregation using a single receiver and frequency-multiplexed intensity-modulated ONUs

Authors: Zichuan Zhou, **long Wei, Kari A. Clark, Eric Sillekens, Callum Deakin, Ronit Sohanpal, Yuan Luo, Radan Slavík, Zhixin Liu

Abstract: We demonstrate 2.5-GHz-spacing frequency multiplexing capable of aggregating 64 intensity-modulated end-users using low-speed electronic and optoelectronic components. All optical network units (ONUs) achieved high per-user capacity with dedicated optical bands, enabling future large-bandwidth and low latency applications. We demonstrate 2.5-GHz-spacing frequency multiplexing capable of aggregating 64 intensity-modulated end-users using low-speed electronic and optoelectronic components. All optical network units (ONUs) achieved high per-user capacity with dedicated optical bands, enabling future large-bandwidth and low latency applications. △ Less

Submitted 13 September, 2021; originally announced October 2021.

Comments: 8 pages

Podracer architectures for scalable Reinforcement Learning

Authors: Matteo Hessel, Manuel Kroiss, Aidan Clark, Iurii Kemaev, John Quan, Thomas Keck, Fabio Viola, Hado van Hasselt

Abstract: Supporting state-of-the-art AI research requires balancing rapid prototy**, ease of use, and quick iteration, with the ability to deploy experiments at a scale traditionally associated with production systems.Deep learning frameworks such as TensorFlow, PyTorch and JAX allow users to transparently make use of accelerators, such as TPUs and GPUs, to offload the more computationally intensive part… ▽ More Supporting state-of-the-art AI research requires balancing rapid prototy**, ease of use, and quick iteration, with the ability to deploy experiments at a scale traditionally associated with production systems.Deep learning frameworks such as TensorFlow, PyTorch and JAX allow users to transparently make use of accelerators, such as TPUs and GPUs, to offload the more computationally intensive parts of training and inference in modern deep learning systems. Popular training pipelines that use these frameworks for deep learning typically focus on (un-)supervised learning. How to best train reinforcement learning (RL) agents at scale is still an active research area. In this report we argue that TPUs are particularly well suited for training RL agents in a scalable, efficient and reproducible way. Specifically we describe two architectures designed to make the best use of the resources available on a TPU Pod (a special configuration in a Google data center that features multiple TPU devices connected to each other by extremely low latency communication channels). △ Less

Submitted 13 April, 2021; originally announced April 2021.

Skillful Precipitation Nowcasting using Deep Generative Models of Radar

Authors: Suman Ravuri, Karel Lenc, Matthew Willson, Dmitry Kangin, Remi Lam, Piotr Mirowski, Megan Fitzsimons, Maria Athanassiadou, Sheleem Kashem, Sam Madge, Rachel Prudden, Amol Mandhane, Aidan Clark, Andrew Brock, Karen Simonyan, Raia Hadsell, Niall Robinson, Ellen Clancy, Alberto Arribas, Shakir Mohamed

Abstract: Precipitation nowcasting, the high-resolution forecasting of precipitation up to two hours ahead, supports the real-world socio-economic needs of many sectors reliant on weather-dependent decision-making. State-of-the-art operational nowcasting methods typically advect precipitation fields with radar-based wind estimates, and struggle to capture important non-linear events such as convective initi… ▽ More Precipitation nowcasting, the high-resolution forecasting of precipitation up to two hours ahead, supports the real-world socio-economic needs of many sectors reliant on weather-dependent decision-making. State-of-the-art operational nowcasting methods typically advect precipitation fields with radar-based wind estimates, and struggle to capture important non-linear events such as convective initiations. Recently introduced deep learning methods use radar to directly predict future rain rates, free of physical constraints. While they accurately predict low-intensity rainfall, their operational utility is limited because their lack of constraints produces blurry nowcasts at longer lead times, yielding poor performance on more rare medium-to-heavy rain events. To address these challenges, we present a Deep Generative Model for the probabilistic nowcasting of precipitation from radar. Our model produces realistic and spatio-temporally consistent predictions over regions up to 1536 km x 1280 km and with lead times from 5-90 min ahead. In a systematic evaluation by more than fifty expert forecasters from the Met Office, our generative model ranked first for its accuracy and usefulness in 88% of cases against two competitive methods, demonstrating its decision-making value and ability to provide physical insight to real-world experts. When verified quantitatively, these nowcasts are skillful without resorting to blurring. We show that generative nowcasting can provide probabilistic predictions that improve forecast value and support operational utility, and at resolutions and lead times where alternative methods struggle. △ Less

Submitted 2 April, 2021; originally announced April 2021.

Comments: 46 pages, 17 figures, 2 tables

Reinforcement Learning Beyond Expectation

Authors: Bhaskar Ramasubramanian, Luyao Niu, Andrew Clark, Radha Poovendran

Abstract: The inputs and preferences of human users are important considerations in situations where these users interact with autonomous cyber or cyber-physical systems. In these scenarios, one is often interested in aligning behaviors of the system with the preferences of one or more human users. Cumulative prospect theory (CPT) is a paradigm that has been empirically shown to model a tendency of humans t… ▽ More The inputs and preferences of human users are important considerations in situations where these users interact with autonomous cyber or cyber-physical systems. In these scenarios, one is often interested in aligning behaviors of the system with the preferences of one or more human users. Cumulative prospect theory (CPT) is a paradigm that has been empirically shown to model a tendency of humans to view gains and losses differently. In this paper, we consider a setting where an autonomous agent has to learn behaviors in an unknown environment. In traditional reinforcement learning, these behaviors are learned through repeated interactions with the environment by optimizing an expected utility. In order to endow the agent with the ability to closely mimic the behavior of human users, we optimize a CPT-based cost. We introduce the notion of the CPT-value of an action taken in a state, and establish the convergence of an iterative dynamic programming-based approach to estimate this quantity. We develop two algorithms to enable agents to learn policies to optimize the CPT-vale, and evaluate these algorithms in environments where a target state has to be reached while avoiding obstacles. We demonstrate that behaviors of the agent learned using these algorithms are better aligned with that of a human user who might be placed in the same environment, and is significantly improved over a baseline that optimizes an expected utility. △ Less

Submitted 29 March, 2021; originally announced April 2021.

Scalable Planning in Multi-Agent MDPs

Authors: Dinuka Sahabandu, Luyao Niu, Andrew Clark, Radha Poovendran

Abstract: Multi-agent Markov Decision Processes (MMDPs) arise in a variety of applications including target tracking, control of multi-robot swarms, and multiplayer games. A key challenge in MMDPs occurs when the state and action spaces grow exponentially in the number of agents, making computation of an optimal policy computationally intractable for medium- to large-scale problems. One property that has be… ▽ More Multi-agent Markov Decision Processes (MMDPs) arise in a variety of applications including target tracking, control of multi-robot swarms, and multiplayer games. A key challenge in MMDPs occurs when the state and action spaces grow exponentially in the number of agents, making computation of an optimal policy computationally intractable for medium- to large-scale problems. One property that has been exploited to mitigate this complexity is transition independence, in which each agent's transition probabilities are independent of the states and actions of other agents. Transition independence enables factorization of the MMDP and computation of local agent policies but does not hold for arbitrary MMDPs. In this paper, we propose an approximate transition dependence property, called $δ$-transition dependence and develop a metric for quantifying how far an MMDP deviates from transition independence. Our definition of $δ$-transition dependence recovers transition independence as a special case when $δ$ is zero. We develop a polynomial time algorithm in the number of agents that achieves a provable bound on the global optimum when the reward functions are monotone increasing and submodular in the agent actions. We evaluate our approach on two case studies, namely, multi-robot control and multi-agent patrolling example. △ Less

Submitted 29 March, 2021; originally announced March 2021.

Test case generation for agent-based models: A systematic literature review

Authors: Andrew G. Clark, Neil Walkinshaw, Robert M. Hierons

Abstract: Agent-based models play an important role in simulating complex emergent phenomena and supporting critical decisions. In this context, a software fault may result in poorly informed decisions that lead to disastrous consequences. The ability to rigorously test these models is therefore essential. In this systematic literature review, we answer five research questions related to the key aspects of… ▽ More Agent-based models play an important role in simulating complex emergent phenomena and supporting critical decisions. In this context, a software fault may result in poorly informed decisions that lead to disastrous consequences. The ability to rigorously test these models is therefore essential. In this systematic literature review, we answer five research questions related to the key aspects of test case generation in agent-based models: What are the information artifacts used to generate tests? How are these tests generated? How is a verdict assigned to a generated test? How is the adequacy of a generated test suite measured? What level of abstraction of an agent-based model is targeted by a generated test? Our results show that whilst the majority of techniques are effective for testing functional requirements at the agent and integration levels of abstraction, there are comparatively few techniques capable of testing society-level behaviour. Additionally, we identify a need for more thorough evaluation using realistic case studies that feature challenging properties associated with a typical agent-based model. △ Less

Submitted 18 March, 2021; v1 submitted 12 March, 2021; originally announced March 2021.

A Convolutional Neural Network based Cascade Reconstruction for the IceCube Neutrino Observatory

Authors: R. Abbasi, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, C. Alispach, A. A. Alves Jr., N. M. Amin, R. An, K. Andeen, T. Anderson, I. Ansseau, G. Anton, C. Argüelles, S. Axani, X. Bai, A. Balagopal V., A. Barbano, S. W. Barwick, B. Bastian, V. Basu, V. Baum, S. Baur, R. Bay , et al. (343 additional authors not shown)

Abstract: Continued improvements on existing reconstruction methods are vital to the success of high-energy physics experiments, such as the IceCube Neutrino Observatory. In IceCube, further challenges arise as the detector is situated at the geographic South Pole where computational resources are limited. However, to perform real-time analyses and to issue alerts to telescopes around the world, powerful an… ▽ More Continued improvements on existing reconstruction methods are vital to the success of high-energy physics experiments, such as the IceCube Neutrino Observatory. In IceCube, further challenges arise as the detector is situated at the geographic South Pole where computational resources are limited. However, to perform real-time analyses and to issue alerts to telescopes around the world, powerful and fast reconstruction methods are desired. Deep neural networks can be extremely powerful, and their usage is computationally inexpensive once the networks are trained. These characteristics make a deep learning-based approach an excellent candidate for the application in IceCube. A reconstruction method based on convolutional architectures and hexagonally shaped kernels is presented. The presented method is robust towards systematic uncertainties in the simulation and has been tested on experimental data. In comparison to standard reconstruction methods in IceCube, it can improve upon the reconstruction accuracy, while reducing the time necessary to run the reconstruction by two to three orders of magnitude. △ Less

Submitted 26 July, 2021; v1 submitted 27 January, 2021; originally announced January 2021.

Comments: 39 pages, 15 figures, submitted to Journal of Instrumentation; added references

Journal ref: JINST 16 (2021) P07041

A Continuum Manipulator for Open-Source Surgical Robotics Research and Shared Development

Authors: Angus B. Clark, Visakan Mathivannan, Nicolas Rojas

Abstract: Many have explored the application of continuum robot manipulators for minimally invasive surgery, and have successfully demonstrated the advantages their flexible design provides -- with some solutions having reached commercialisation and clinical practice. However, the usual high complexity and closed-nature of such designs has traditionally restricted the shared development of continuum robots… ▽ More Many have explored the application of continuum robot manipulators for minimally invasive surgery, and have successfully demonstrated the advantages their flexible design provides -- with some solutions having reached commercialisation and clinical practice. However, the usual high complexity and closed-nature of such designs has traditionally restricted the shared development of continuum robots across the research area, thus impacting further progress and the solution of open challenges. In order to close this gap, this paper introduces ENDO, an open-source 3-segment continuum robot manipulator with control and actuation mechanism, whose focus is on simplicity, affordability, and accessibility. This robotic system is fabricated from low cost off-the-shelf components and rapid prototy** methods, and its information for implementation (and that of future iterations), including CAD files and source code, is available to the public on the Open Source Medical Robots initiative's repository on GitHub (https://github.com/OpenSourceMedicalRobots), with the control library also available directly from Arduino. Herein, we present details of the robot design and control, validate functionality by experimentally evaluating its workspace, and discuss possible paths for future development. △ Less

Submitted 4 January, 2021; originally announced January 2021.

Comments: 4 pages, 6 figures

Adapting LIGO workflows to run in the Open Science Grid

Authors: Edgar Fajardo, Frank Wuerthwein, Brian Bockelman, Miron Livny, Greg Thain, James Alexander Clark, Peter Couvares, Josh Willis

Abstract: During the first observation run the LIGO collaboration needed to offload some of its most, intense CPU workflows from its dedicated computing sites to opportunistic resources. Open Science Grid enabled LIGO to run PyCbC, RIFT and Bayeswave workflows to seamlessly run in a combination of owned and opportunistic resources. One of the challenges is enabling the workflows to use several heterogeneous… ▽ More During the first observation run the LIGO collaboration needed to offload some of its most, intense CPU workflows from its dedicated computing sites to opportunistic resources. Open Science Grid enabled LIGO to run PyCbC, RIFT and Bayeswave workflows to seamlessly run in a combination of owned and opportunistic resources. One of the challenges is enabling the workflows to use several heterogeneous resources in a coordinated and effective way. △ Less

Submitted 30 November, 2020; originally announced November 2020.

Abstracting Gradual Ty** Moving Forward: Precise and Space-Efficient (Technical Report)

Authors: Felipe Bañados Schwerter, Alison M. Clark, Khurram A. Jafery, Ronald Garcia

Abstract: Abstracting Gradual Ty** (AGT) is a systematic approach to designing gradually-typed languages. Languages developed using AGT automatically satisfy the formal semantic criteria for gradual languages identified by Siek et al. [2015]. Nonetheless, vanilla AGT semantics can still have important shortcomings. First, a gradual language's runtime checks should preserve the space-efficiency guarantees… ▽ More Abstracting Gradual Ty** (AGT) is a systematic approach to designing gradually-typed languages. Languages developed using AGT automatically satisfy the formal semantic criteria for gradual languages identified by Siek et al. [2015]. Nonetheless, vanilla AGT semantics can still have important shortcomings. First, a gradual language's runtime checks should preserve the space-efficiency guarantees inherent to the underlying static and dynamic languages. To the contrary, the default operational semantics of AGT break proper tail calls. Second, a gradual language's runtime checks should enforce basic modular type-based invariants expected from the static type discipline. To the contrary, the default operational semantics of AGT may fail to enforce some invariants in surprising ways. We demonstrate this in the $\text{GTFL}_\lesssim$ language of Garcia et al. [2016]. This paper addresses both problems at once by refining the theory underlying AGT's dynamic checks. Garcia et al. [2016] observe that AGT involves two abstractions of static types: one for the static semantics and one for the dynamic semantics. We recast the latter as an abstract interpretation of subty** itself, while gradual types still abstract static types. Then we show how forward-completeness [Giacobazzi and Quintarelli 2001] is key to supporting both space-efficient execution and reliable runtime type enforcement. △ Less

Submitted 11 November, 2020; v1 submitted 27 October, 2020; originally announced October 2020.

Comments: Accepted to POPL '21

Design and Workspace Characterisation of Malleable Robots

Authors: Angus B. Clark, Nicolas Rojas

Abstract: For the majority of tasks performed by traditional serial robot arms, such as bin picking or pick and place, only two or three degrees of freedom (DOF) are required for motion; however, by augmenting the number of degrees of freedom, further dexterity of robot arms for multiple tasks can be achieved. Instead of increasing the number of joints of a robot to improve flexibility and adaptation, which… ▽ More For the majority of tasks performed by traditional serial robot arms, such as bin picking or pick and place, only two or three degrees of freedom (DOF) are required for motion; however, by augmenting the number of degrees of freedom, further dexterity of robot arms for multiple tasks can be achieved. Instead of increasing the number of joints of a robot to improve flexibility and adaptation, which increases control complexity, weight, and cost of the overall system, malleable robots utilise a variable stiffness link between joints allowing the relative positioning of the revolute pairs at each end of the link to vary, thus enabling a low DOF serial robot to adapt across tasks by varying its workspace. In this paper, we present the design and prototy** of a 2-DOF malleable robot, calculate the general equation of its workspace using a parameterisation based on distance geometry---suitable for robot arms of variable topology, and characterise the workspace categories that the end effector of the robot can trace via reconfiguration. Through the design and construction of the malleable robot we explore design considerations, and demonstrate the viability of the overall concept. By using motion tracking on the physical robot, we show examples of the infinite number of workspaces that the introduced 2-DOF malleable robot can achieve. △ Less

Submitted 14 September, 2020; originally announced September 2020.

Comments: 7 Pages, 7 figures, conference

Privacy-Preserving Resilience of Cyber-Physical Systems to Adversaries

Authors: Bhaskar Ramasubramanian, Luyao Niu, Andrew Clark, Linda Bushnell, Radha Poovendran

Abstract: A cyber-physical system (CPS) is expected to be resilient to more than one type of adversary. In this paper, we consider a CPS that has to satisfy a linear temporal logic (LTL) objective in the presence of two kinds of adversaries. The first adversary has the ability to tamper with inputs to the CPS to influence satisfaction of the LTL objective. The interaction of the CPS with this adversary is m… ▽ More A cyber-physical system (CPS) is expected to be resilient to more than one type of adversary. In this paper, we consider a CPS that has to satisfy a linear temporal logic (LTL) objective in the presence of two kinds of adversaries. The first adversary has the ability to tamper with inputs to the CPS to influence satisfaction of the LTL objective. The interaction of the CPS with this adversary is modeled as a stochastic game. We synthesize a controller for the CPS to maximize the probability of satisfying the LTL objective under any policy of this adversary. The second adversary is an eavesdropper who can observe labeled trajectories of the CPS generated from the previous step. It could then use this information to launch other kinds of attacks. A labeled trajectory is a sequence of labels, where a label is associated to a state and is linked to the satisfaction of the LTL objective at that state. We use differential privacy to quantify the indistinguishability between states that are related to each other when the eavesdropper sees a labeled trajectory. Two trajectories of equal length will be differentially private if they are differentially private at each state along the respective trajectories. We use a skewed Kantorovich metric to compute distances between probability distributions over states resulting from actions chosen according to policies from related states in order to quantify differential privacy. Moreover, we do this in a manner that does not affect the satisfaction probability of the LTL objective. We validate our approach on a simulation of a UAV that has to satisfy an LTL objective in an adversarial environment. △ Less

Submitted 26 July, 2020; originally announced July 2020.

Comments: Accepted to the IEEE Conference on Decision and Control (CDC), 2020

Secure Control in Partially Observable Environments to Satisfy LTL Specifications

Authors: Bhaskar Ramasubramanian, Luyao Niu, Andrew Clark, Linda Bushnell, Radha Poovendran

Abstract: This paper studies the synthesis of control policies for an agent that has to satisfy a temporal logic specification in a partially observable environment, in the presence of an adversary. The interaction of the agent (defender) with the adversary is modeled as a partially observable stochastic game. The goal is to generate a defender policy to maximize satisfaction of a given temporal logic speci… ▽ More This paper studies the synthesis of control policies for an agent that has to satisfy a temporal logic specification in a partially observable environment, in the presence of an adversary. The interaction of the agent (defender) with the adversary is modeled as a partially observable stochastic game. The goal is to generate a defender policy to maximize satisfaction of a given temporal logic specification under any adversary policy. The search for policies is limited to the space of finite state controllers, which leads to a tractable approach to determine policies. We relate the satisfaction of the specification to reaching (a subset of) recurrent states of a Markov chain. We present an algorithm to determine a set of defender and adversary finite state controllers of fixed sizes that will satisfy the temporal logic specification, and prove that it is sound. We then propose a value-iteration algorithm to maximize the probability of satisfying the temporal logic specification under finite state controllers of fixed sizes. Lastly, we extend this setting to the scenario where the size of the finite state controller of the defender can be increased to improve the satisfaction probability. We illustrate our approach with an example. △ Less

Submitted 4 November, 2020; v1 submitted 22 July, 2020; originally announced July 2020.

Comments: Provisionally accepted to the IEEE Transactions on Automatic Control. arXiv admin note: text overlap with arXiv:1903.06873

Dynamic Information Flow Tracking for Detection of Advanced Persistent Threats: A Stochastic Game Approach

Authors: Shana Moothedath, Dinuka Sahabandu, Joey Allen, Andrew Clark, Linda Bushnell, Wenke Lee, Radha Poovendran

Abstract: Advanced Persistent Threats (APTs) are stealthy customized attacks by intelligent adversaries. This paper deals with the detection of APTs that infiltrate cyber systems and compromise specifically targeted data and/or infrastructures. Dynamic information flow tracking is an information trace-based detection mechanism against APTs that taints suspicious information flows in the system and generates… ▽ More Advanced Persistent Threats (APTs) are stealthy customized attacks by intelligent adversaries. This paper deals with the detection of APTs that infiltrate cyber systems and compromise specifically targeted data and/or infrastructures. Dynamic information flow tracking is an information trace-based detection mechanism against APTs that taints suspicious information flows in the system and generates security analysis for unauthorized use of tainted data. In this paper, we develop an analytical model for resource-efficient detection of APTs using an information flow tracking game. The game is a nonzero-sum, turn-based, stochastic game with asymmetric information as the defender cannot distinguish whether an incoming flow is malicious or benign and hence has only partial state observation. We analyze equilibrium of the game and prove that a Nash equilibrium is given by a solution to the minimum capacity cut set problem on a flow-network derived from the system, where the edge capacities are obtained from the cost of performing security analysis. Finally, we implement our algorithm on the real-world dataset for a data exfiltration attack augmented with false-negative and false-positive rates and compute an optimal defender strategy. △ Less

Submitted 25 June, 2021; v1 submitted 22 June, 2020; originally announced June 2020.

Assessing the impact of the coronavirus lockdown on unhappiness, loneliness, and boredom using Google Trends

Authors: Abel Brodeur, Andrew E. Clark, Sarah Fleche, Nattavudh Powdthavee

Abstract: The COVID-19 pandemic has led many governments to implement lockdowns. While lockdowns may help to contain the spread of the virus, it is possible that substantial damage to population well-being will result. This study relies on Google Trends data and tests whether the lockdowns implemented in Europe and America led to changes in well-being related topic search terms. Using different methods to e… ▽ More The COVID-19 pandemic has led many governments to implement lockdowns. While lockdowns may help to contain the spread of the virus, it is possible that substantial damage to population well-being will result. This study relies on Google Trends data and tests whether the lockdowns implemented in Europe and America led to changes in well-being related topic search terms. Using different methods to evaluate the causal effects of lockdown, we find a substantial increase in the search intensity for boredom in Europe and the US. We also found a significant increase in searches for loneliness, worry and sadness, while searches for stress, suicide and divorce on the contrary fell. Our results suggest that people's mental health may have been severely affected by the lockdown. △ Less

Submitted 25 April, 2020; originally announced April 2020.

Transformation-based Adversarial Video Prediction on Large-Scale Data

Authors: Pauline Luc, Aidan Clark, Sander Dieleman, Diego de Las Casas, Yotam Doron, Albin Cassirer, Karen Simonyan

Abstract: Recent breakthroughs in adversarial generative modeling have led to models capable of producing video samples of high quality, even on large and complex datasets of real-world video. In this work, we focus on the task of video prediction, where given a sequence of frames extracted from a video, the goal is to generate a plausible future sequence. We first improve the state of the art by performing… ▽ More Recent breakthroughs in adversarial generative modeling have led to models capable of producing video samples of high quality, even on large and complex datasets of real-world video. In this work, we focus on the task of video prediction, where given a sequence of frames extracted from a video, the goal is to generate a plausible future sequence. We first improve the state of the art by performing a systematic empirical study of discriminator decompositions and proposing an architecture that yields faster convergence and higher performance than previous approaches. We then analyze recurrent units in the generator, and propose a novel recurrent unit which transforms its past hidden state according to predicted motion-like features, and refines it to handle dis-occlusions, scene changes and other complex behavior. We show that this recurrent unit consistently outperforms previous designs. Our final model leads to a leap in the state-of-the-art performance, obtaining a test set Frechet Video Distance of 25.7, down from 69.2, on the large-scale Kinetics-600 dataset. △ Less

Submitted 17 November, 2021; v1 submitted 9 March, 2020; originally announced March 2020.

Discrimination Among Multiple Cutaneous and Proprioceptive Hand Percepts Evoked by Nerve Stimulation with Utah Slanted Electrode Arrays in Human Amputees

Authors: David M. Page, Suzanne M. Wendelken, Tyler S. Davis, David T. Kluger, Douglas T. Hutchinson, Jacob A. George, Gregory A. Clark

Abstract: Objective: This paper aims to demonstrate functional discriminability among restored hand sensations with different locations, qualities, and intensities that are evoked by microelectrode stimulation of residual afferent fibers in human amputees. Methods: We implanted a Utah Slanted Electrode Array (USEA) in the median and ulnar residual arm nerves of three transradial amputees and delivered stimu… ▽ More Objective: This paper aims to demonstrate functional discriminability among restored hand sensations with different locations, qualities, and intensities that are evoked by microelectrode stimulation of residual afferent fibers in human amputees. Methods: We implanted a Utah Slanted Electrode Array (USEA) in the median and ulnar residual arm nerves of three transradial amputees and delivered stimulation via different electrodes and at different frequencies to produce various locations, qualities, and intensities of sensation on the missing hand. Blind discrimination trials were performed to determine how well subjects could discriminate among these restored sensations. Results: Subjects discriminated among restored sensory percepts with varying cutaneous and proprioceptive locations, qualities, and intensities in blind trials, including discrimination among up to 10 different location-intensity combinations (15/30 successes, p < 0.0005). Variations in the site of stimulation within the nerve, via electrode selection, enabled discrimination among up to 5 locations and qualities (35/35 successes, p < 0.0001). Variations in the stimulation frequency enabled discrimination among 4 different intensities at the same location (13/20 successes, p < 0.005). One subject discriminated among simultaneous, alternating, and isolated stimulation of two different USEA electrodes, as may be desired during multi-sensor closed-loop prosthesis use (20/25 successes, p < 0.001). Conclusion: USEA stimulation enables encoding of a diversity of functionally discriminable sensations with different locations, qualities, and intensities. Significance: These percepts provide a potentially rich source of sensory feedback that may enhance performance and embodiment during multi-sensor, closed-loop prosthesis use. △ Less

Submitted 7 March, 2020; originally announced March 2020.

Comments: 19 pages