Showing 1–24 of 24 results for author: Cattin, P C

Deep-Learning Approach for Tissue Classification using Acoustic Waves during Ablation with an Er:YAG Laser (Updated)

Authors: Carlo Seppi, Philippe C. Cattin

Abstract: Today's mechanical tools for bone cutting (osteotomy) cause mechanical trauma that prolongs the healing process. Medical device manufacturers aim to minimize this trauma, with minimally invasive surgery using laser cutting as one innovation. This method ablates tissue using laser light instead of mechanical tools, reducing post-surgery healing time. A reliable feedback system is crucial during las… ▽ More Today's mechanical tools for bone cutting (osteotomy) cause mechanical trauma that prolongs the healing process. Medical device manufacturers aim to minimize this trauma, with minimally invasive surgery using laser cutting as one innovation. This method ablates tissue using laser light instead of mechanical tools, reducing post-surgery healing time. A reliable feedback system is crucial during laser surgery to prevent damage to surrounding tissues. We propose a tissue classification method analyzing acoustic waves generated during laser ablation, demonstrating its applicability in an ex-vivo experiment. The ablation process with a microsecond pulsed Er:YAG laser produces acoustic waves, acquired with an air-coupled transducer. These waves were used to classify five porcine tissue types: hard bone, soft bone, muscle, fat, and skin. For automated tissue classification, we compared five Neural Network (NN) approaches: a one-dimensional Convolutional Neural Network (CNN) with time-dependent input, a Fully-connected Neural Network (FcNN) with either the frequency spectrum or principal components of the frequency spectrum as input, and a combination of a CNN and an FcNN with time-dependent data and its frequency spectrum as input. Consecutive acoustic waves were used to improve classification accuracy. Grad-Cam identified the activation map of the frequencies, showing low frequencies as the most important for this task. Our results indicated that combining time-dependent data with its frequency spectrum achieved the highest classification accuracy (65.5%-75.5%). We also found that using the frequency spectrum alone was sufficient, with no additional benefit from applying Principal Components Analysis (PCA). △ Less

Submitted 24 June, 2024; v1 submitted 6 June, 2024; originally announced June 2024.

Comments: This paper is an updated version of Deep-Learning Approach for Tissue Classification using Acoustic Waves during Ablation with an Er:YAG Laser originally published in DOI:10.1109/ACCESS.2021.3113055. This update addresses several issues and incorporates corrections as outlined in DOI:10.1109/ACCESS.2024.3395071. We provide here a detailed description of our experiments and the new models we used

Denoising Diffusion Models for 3D Healthy Brain Tissue Inpainting

Authors: Alicia Durrer, Julia Wolleb, Florentin Bieder, Paul Friedrich, Lester Melie-Garcia, Mario Ocampo-Pineda, Cosmin I. Bercea, Ibrahim E. Hamamci, Benedikt Wiestler, Marie Piraud, Özgür Yaldizli, Cristina Granziera, Bjoern H. Menze, Philippe C. Cattin, Florian Kofler

Abstract: Monitoring diseases that affect the brain's structural integrity requires automated analysis of magnetic resonance (MR) images, e.g., for the evaluation of volumetric changes. However, many of the evaluation tools are optimized for analyzing healthy tissue. To enable the evaluation of scans containing pathological tissue, it is therefore required to restore healthy tissue in the pathological areas… ▽ More Monitoring diseases that affect the brain's structural integrity requires automated analysis of magnetic resonance (MR) images, e.g., for the evaluation of volumetric changes. However, many of the evaluation tools are optimized for analyzing healthy tissue. To enable the evaluation of scans containing pathological tissue, it is therefore required to restore healthy tissue in the pathological areas. In this work, we explore and extend denoising diffusion models for consistent inpainting of healthy 3D brain tissue. We modify state-of-the-art 2D, pseudo-3D, and 3D methods working in the image space, as well as 3D latent and 3D wavelet diffusion models, and train them to synthesize healthy brain tissue. Our evaluation shows that the pseudo-3D model performs best regarding the structural-similarity index, peak signal-to-noise ratio, and mean squared error. To emphasize the clinical relevance, we fine-tune this model on data containing synthetic MS lesions and evaluate it on a downstream brain tissue segmentation task, whereby it outperforms the established FMRIB Software Library (FSL) lesion-filling method. △ Less

Submitted 21 March, 2024; originally announced March 2024.

Binary Noise for Binary Tasks: Masked Bernoulli Diffusion for Unsupervised Anomaly Detection

Authors: Julia Wolleb, Florentin Bieder, Paul Friedrich, Peter Zhang, Alicia Durrer, Philippe C. Cattin

Abstract: The high performance of denoising diffusion models for image generation has paved the way for their application in unsupervised medical anomaly detection. As diffusion-based methods require a lot of GPU memory and have long sampling times, we present a novel and fast unsupervised anomaly detection approach based on latent Bernoulli diffusion models. We first apply an autoencoder to compress the in… ▽ More The high performance of denoising diffusion models for image generation has paved the way for their application in unsupervised medical anomaly detection. As diffusion-based methods require a lot of GPU memory and have long sampling times, we present a novel and fast unsupervised anomaly detection approach based on latent Bernoulli diffusion models. We first apply an autoencoder to compress the input images into a binary latent representation. Next, a diffusion model that follows a Bernoulli noise schedule is employed to this latent space and trained to restore binary latent representations from perturbed ones. The binary nature of this diffusion model allows us to identify entries in the latent space that have a high probability of flip** their binary code during the denoising process, which indicates out-of-distribution data. We propose a masking algorithm based on these probabilities, which improves the anomaly detection scores. We achieve state-of-the-art performance compared to other diffusion-based unsupervised anomaly detection algorithms while significantly reducing sampling time and memory consumption. The code is available at https://github.com/JuliaWolleb/Anomaly_berdiff. △ Less

Submitted 18 March, 2024; originally announced March 2024.

WDM: 3D Wavelet Diffusion Models for High-Resolution Medical Image Synthesis

Authors: Paul Friedrich, Julia Wolleb, Florentin Bieder, Alicia Durrer, Philippe C. Cattin

Abstract: Due to the three-dimensional nature of CT- or MR-scans, generative modeling of medical images is a particularly challenging task. Existing approaches mostly apply patch-wise, slice-wise, or cascaded generation techniques to fit the high-dimensional data into the limited GPU memory. However, these approaches may introduce artifacts and potentially restrict the model's applicability for certain down… ▽ More Due to the three-dimensional nature of CT- or MR-scans, generative modeling of medical images is a particularly challenging task. Existing approaches mostly apply patch-wise, slice-wise, or cascaded generation techniques to fit the high-dimensional data into the limited GPU memory. However, these approaches may introduce artifacts and potentially restrict the model's applicability for certain downstream tasks. This work presents WDM, a wavelet-based medical image synthesis framework that applies a diffusion model on wavelet decomposed images. The presented approach is a simple yet effective way of scaling diffusion models to high resolutions and can be trained on a single 40 GB GPU. Experimental results on BraTS and LIDC-IDRI unconditional image generation at a resolution of $128 \times 128 \times 128$ show state-of-the-art image fidelity (FID) and sample diversity (MS-SSIM) scores compared to GANs, Diffusion Models, and Latent Diffusion Models. Our proposed method is the only one capable of generating high-quality images at a resolution of $256 \times 256 \times 256$. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Comments: Code: https://github.com/pfriedri/wdm-3d

Denoising Diffusion Models for Inpainting of Healthy Brain Tissue

Authors: Alicia Durrer, Philippe C. Cattin, Julia Wolleb

Abstract: This paper is a contribution to the "BraTS 2023 Local Synthesis of Healthy Brain Tissue via Inpainting Challenge". The task of this challenge is to transform tumor tissue into healthy tissue in brain magnetic resonance (MR) images. This idea originates from the problem that MR images can be evaluated using automatic processing tools, however, many of these tools are optimized for the analysis of h… ▽ More This paper is a contribution to the "BraTS 2023 Local Synthesis of Healthy Brain Tissue via Inpainting Challenge". The task of this challenge is to transform tumor tissue into healthy tissue in brain magnetic resonance (MR) images. This idea originates from the problem that MR images can be evaluated using automatic processing tools, however, many of these tools are optimized for the analysis of healthy tissue. By solving the given inpainting task, we enable the automatic analysis of images featuring lesions, and further downstream tasks. Our approach builds on denoising diffusion probabilistic models. We use a 2D model that is trained using slices in which healthy tissue was cropped out and is learned to be inpainted again. This allows us to use the ground truth healthy tissue during training. In the sampling stage, we replace the slices containing diseased tissue in the original 3D volume with the slices containing the healthy tissue inpainting. With our approach, we achieve comparable results to the competing methods. On the validation set our model achieves a mean SSIM of 0.7804, a PSNR of 20.3525 and a MSE of 0.0113. In future we plan to extend our 2D model to a 3D model, allowing to inpaint the region of interest as a whole without losing context information of neighboring slices. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: 12 pages, 5 figures, MICCAI challenge submission

Diffusion Models for Memory-efficient Processing of 3D Medical Images

Authors: Florentin Bieder, Julia Wolleb, Alicia Durrer, Robin Sandkühler, Philippe C. Cattin

Abstract: Denoising diffusion models have recently achieved state-of-the-art performance in many image-generation tasks. They do, however, require a large amount of computational resources. This limits their application to medical tasks, where we often deal with large 3D volumes, like high-resolution three-dimensional data. In this work, we present a number of different ways to reduce the resource consumpti… ▽ More Denoising diffusion models have recently achieved state-of-the-art performance in many image-generation tasks. They do, however, require a large amount of computational resources. This limits their application to medical tasks, where we often deal with large 3D volumes, like high-resolution three-dimensional data. In this work, we present a number of different ways to reduce the resource consumption for 3D diffusion models and apply them to a dataset of 3D images. The main contribution of this paper is the memory-efficient patch-based diffusion model \textit{PatchDDM}, which can be applied to the total volume during inference while the training is performed only on patches. While the proposed diffusion model can be applied to any image generation tasks, we evaluate the method on the tumor segmentation task of the BraTS2020 dataset and demonstrate that we can generate meaningful three-dimensional segmentations. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: Accepted at MIDL 2023

Diffusion Models for Contrast Harmonization of Magnetic Resonance Images

Authors: Alicia Durrer, Julia Wolleb, Florentin Bieder, Tim Sinnecker, Matthias Weigel, Robin Sandkühler, Cristina Granziera, Özgür Yaldizli, Philippe C. Cattin

Abstract: Magnetic resonance (MR) images from multiple sources often show differences in image contrast related to acquisition settings or the used scanner type. For long-term studies, longitudinal comparability is essential but can be impaired by these contrast differences, leading to biased results when using automated evaluation tools. This study presents a diffusion model-based approach for contrast har… ▽ More Magnetic resonance (MR) images from multiple sources often show differences in image contrast related to acquisition settings or the used scanner type. For long-term studies, longitudinal comparability is essential but can be impaired by these contrast differences, leading to biased results when using automated evaluation tools. This study presents a diffusion model-based approach for contrast harmonization. We use a data set consisting of scans of 18 Multiple Sclerosis patients and 22 healthy controls. Each subject was scanned in two MR scanners of different magnetic field strengths (1.5 T and 3 T), resulting in a paired data set that shows scanner-inherent differences. We map images from the source contrast to the target contrast for both directions, from 3 T to 1.5 T and from 1.5 T to 3 T. As we only want to change the contrast, not the anatomical information, our method uses the original image to guide the image-to-image translation process by adding structural information. The aim is that the mapped scans display increased comparability with scans of the target contrast for downstream tasks. We evaluate this method for the task of segmentation of cerebrospinal fluid, grey matter and white matter. Our method achieves good and consistent results for both directions of the map**. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Point Cloud Diffusion Models for Automatic Implant Generation

Authors: Paul Friedrich, Julia Wolleb, Florentin Bieder, Florian M. Thieringer, Philippe C. Cattin

Abstract: Advances in 3D printing of biocompatible materials make patient-specific implants increasingly popular. The design of these implants is, however, still a tedious and largely manual process. Existing approaches to automate implant generation are mainly based on 3D U-Net architectures on downsampled or patch-wise data, which can result in a loss of detail or contextual information. Following the rec… ▽ More Advances in 3D printing of biocompatible materials make patient-specific implants increasingly popular. The design of these implants is, however, still a tedious and largely manual process. Existing approaches to automate implant generation are mainly based on 3D U-Net architectures on downsampled or patch-wise data, which can result in a loss of detail or contextual information. Following the recent success of Diffusion Probabilistic Models, we propose a novel approach for implant generation based on a combination of 3D point cloud diffusion models and voxelization networks. Due to the stochastic sampling process in our diffusion model, we can propose an ensemble of different implants per defect, from which the physicians can choose the most suitable one. We evaluate our method on the SkullBreak and SkullFix datasets, generating high-quality implants and achieving competitive evaluation scores. △ Less

Submitted 10 July, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Comments: Accepted to MICCAI 2023. Project page: https://pfriedri.github.io/pcdiff-implant-io/ . Code: https://github.com/pfriedri/pcdiff-implant/

Improved distinct bone segmentation in upper-body CT through multi-resolution networks

Authors: Eva Schnider, Julia Wolleb, Antal Huck, Mireille Toranelli, Georg Rauter, Magdalena Müller-Gerbl, Philippe C. Cattin

Abstract: Purpose: Automated distinct bone segmentation from CT scans is widely used in planning and navigation workflows. U-Net variants are known to provide excellent results in supervised semantic segmentation. However, in distinct bone segmentation from upper body CTs a large field of view and a computationally taxing 3D architecture are required. This leads to low-resolution results lacking detail or l… ▽ More Purpose: Automated distinct bone segmentation from CT scans is widely used in planning and navigation workflows. U-Net variants are known to provide excellent results in supervised semantic segmentation. However, in distinct bone segmentation from upper body CTs a large field of view and a computationally taxing 3D architecture are required. This leads to low-resolution results lacking detail or localisation errors due to missing spatial context when using high-resolution inputs. Methods: We propose to solve this problem by using end-to-end trainable segmentation networks that combine several 3D U-Nets working at different resolutions. Our approach, which extends and generalizes HookNet and MRN, captures spatial information at a lower resolution and skips the encoded information to the target network, which operates on smaller high-resolution inputs. We evaluated our proposed architecture against single resolution networks and performed an ablation study on information concatenation and the number of context networks. Results: Our proposed best network achieves a median DSC of 0.86 taken over all 125 segmented bone classes and reduces the confusion among similar-looking bones in different locations. These results outperform our previously published 3D U-Net baseline results on the task and distinct-bone segmentation results reported by other groups. Conclusion: The presented multi-resolution 3D U-Nets address current shortcomings in bone segmentation from upper-body CT scans by allowing for capturing a larger field of view while avoiding the cubic growth of the input pixels and intermediate computations that quickly outgrow the computational capacities in 3D. The approach thus improves the accuracy and efficiency of distinct bone segmentation from upper-body CT. △ Less

Submitted 31 January, 2023; originally announced January 2023.

Comments: Under submission

Position Regression for Unsupervised Anomaly Detection

Authors: Florentin Bieder, Julia Wolleb, Robin Sandkühler, Philippe C. Cattin

Abstract: In recent years, anomaly detection has become an essential field in medical image analysis. Most current anomaly detection methods for medical images are based on image reconstruction. In this work, we propose a novel anomaly detection approach based on coordinate regression. Our method estimates the position of patches within a volume, and is trained only on data of healthy subjects. During infer… ▽ More In recent years, anomaly detection has become an essential field in medical image analysis. Most current anomaly detection methods for medical images are based on image reconstruction. In this work, we propose a novel anomaly detection approach based on coordinate regression. Our method estimates the position of patches within a volume, and is trained only on data of healthy subjects. During inference, we can detect and localize anomalies by considering the error of the position estimate of a given patch. We apply our method to 3D CT volumes and evaluate it on patients with intracranial haemorrhages and cranial fractures. The results show that our method performs well in detecting these anomalies. Furthermore, we show that our method requires less memory than comparable approaches that involve image reconstruction. This is highly relevant for processing large 3D volumes, for instance, CT or MRI scans. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Journal ref: Proceedings of The 5th International Conference on Medical Imaging with Deep Learning, PMLR 172:160-172, 2022

The secret role of undesired physical effects in accurate shape sensing with eccentric FBGs

Authors: Samaneh Manavi Roodsari, Sara Freund, Martin Angelmahr, Georg Rauter, Wolfgang Schade, Philippe C. Cattin

Abstract: Fiber optic shape sensors have enabled unique advances in various navigation tasks, from medical tool tracking to industrial applications. Eccentric fiber Bragg gratings (FBG) are cheap and easy-to-fabricate shape sensors that are often interrogated with simple setups. However, using low-cost interrogation systems for such intensity-based quasi-distributed sensors introduces further complications… ▽ More Fiber optic shape sensors have enabled unique advances in various navigation tasks, from medical tool tracking to industrial applications. Eccentric fiber Bragg gratings (FBG) are cheap and easy-to-fabricate shape sensors that are often interrogated with simple setups. However, using low-cost interrogation systems for such intensity-based quasi-distributed sensors introduces further complications to the sensor's signal. Therefore, eccentric FBGs have not been able to accurately estimate complex multi-bend shapes. Here, we present a novel technique to overcome these limitations and provide accurate and precise shape estimation in eccentric FBG sensors. We investigate the most important bending-induced effects in curved optical fibers that are usually eliminated in intensity-based fiber sensors. These effects contain shape deformation information with a higher spatial resolution that we are now able to extract using deep learning techniques. We design a deep learning model based on a convolutional neural network that is trained to predict shapes given the sensor's spectra. We also provide a visual explanation, highlighting wavelength elements whose intensities are more relevant in making shape predictions. These findings imply that deep learning techniques benefit from the bending-induced effects that impact the desired signal in a complex manner. This is the first step toward cheap yet accurate fiber shape sensing solutions. △ Less

Submitted 19 January, 2023; v1 submitted 28 October, 2022; originally announced October 2022.

Comments: 18 pages, 5 figures, preprint

Using Supervised Deep-Learning to Model Edge-FBG Shape Sensors

Authors: Samaneh Manavi Roodsari, Antal Huck-Horvath, Sara Freund, Azhar Zam, Georg Rauter, Wolfgang Schade, Philippe C. Cattin

Abstract: Continuum robots in robot-assisted minimally invasive surgeries provide adequate access to target anatomies that are not directly reachable through small incisions. Achieving precise and reliable motion control of such snake-like manipulators necessitates an accurate navigation system that requires no line-of-sight and is immune to electromagnetic noises. Fiber Bragg Grating (FBG) shape sensors, p… ▽ More Continuum robots in robot-assisted minimally invasive surgeries provide adequate access to target anatomies that are not directly reachable through small incisions. Achieving precise and reliable motion control of such snake-like manipulators necessitates an accurate navigation system that requires no line-of-sight and is immune to electromagnetic noises. Fiber Bragg Grating (FBG) shape sensors, particularly edge-FBGs, are promising tools for this task. However, in edge-FBG sensors, the intensity ratio between Bragg wavelengths carries the strain information that can be affected by undesired bending-related phenomena, making standard characterization techniques less suitable for these sensors. We showed in our previous work that a deep learning model has the potential to extract the strain information from the full edge-FBG spectrum and accurately predict the sensor's shape. In this paper, we conduct a more thorough investigation to find a suitable architectural design with lower prediction errors. We use the Hyperband algorithm to search for optimal hyperparameters in two steps. First, we limit the search space to layer settings, where the best-performing configuration gets selected. Then, we modify the search space for tuning the training and loss calculation hyperparameters. We also analyze various data transformations on the input and output variables, as data rescaling can directly influence the model's performance. Moreover, we performed discriminative training using Siamese network architecture that employs two CNNs with identical parameters to learn similarity metrics between the spectra of similar target values. The best-performing network architecture among all evaluated configurations can predict the sensor's shape with a median tip error of 3.11 mm. △ Less

Submitted 19 January, 2023; v1 submitted 28 October, 2022; originally announced October 2022.

Comments: 27 pages, 12 figures, preprint

The Swiss Army Knife for Image-to-Image Translation: Multi-Task Diffusion Models

Authors: Julia Wolleb, Robin Sandkühler, Florentin Bieder, Philippe C. Cattin

Abstract: Recently, diffusion models were applied to a wide range of image analysis tasks. We build on a method for image-to-image translation using denoising diffusion implicit models and include a regression problem and a segmentation problem for guiding the image generation to the desired output. The main advantage of our approach is that the guidance during the denoising process is done by an external g… ▽ More Recently, diffusion models were applied to a wide range of image analysis tasks. We build on a method for image-to-image translation using denoising diffusion implicit models and include a regression problem and a segmentation problem for guiding the image generation to the desired output. The main advantage of our approach is that the guidance during the denoising process is done by an external gradient. Consequently, the diffusion model does not need to be retrained for the different tasks on the same dataset. We apply our method to simulate the aging process on facial photos using a regression task, as well as on a brain magnetic resonance (MR) imaging dataset for the simulation of brain tumor growth. Furthermore, we use a segmentation model to inpaint tumors at the desired location in healthy slices of brain MR images. We achieve convincing results for all problems. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Diffusion Models for Medical Anomaly Detection

Authors: Julia Wolleb, Florentin Bieder, Robin Sandkühler, Philippe C. Cattin

Abstract: In medical applications, weakly supervised anomaly detection methods are of great interest, as only image-level annotations are required for training. Current anomaly detection methods mainly rely on generative adversarial networks or autoencoder models. Those models are often complicated to train or have difficulties to preserve fine details in the image. We present a novel weakly supervised anom… ▽ More In medical applications, weakly supervised anomaly detection methods are of great interest, as only image-level annotations are required for training. Current anomaly detection methods mainly rely on generative adversarial networks or autoencoder models. Those models are often complicated to train or have difficulties to preserve fine details in the image. We present a novel weakly supervised anomaly detection method based on denoising diffusion implicit models. We combine the deterministic iterative noising and denoising scheme with classifier guidance for image-to-image translation between diseased and healthy subjects. Our method generates very detailed anomaly maps without the need for a complex training procedure. We evaluate our method on the BRATS2020 dataset for brain tumor detection and the CheXpert dataset for detecting pleural effusions. △ Less

Submitted 5 October, 2022; v1 submitted 8 March, 2022; originally announced March 2022.

Diffusion Models for Implicit Image Segmentation Ensembles

Authors: Julia Wolleb, Robin Sandkühler, Florentin Bieder, Philippe Valmaggia, Philippe C. Cattin

Abstract: Diffusion models have shown impressive performance for generative modelling of images. In this paper, we present a novel semantic segmentation method based on diffusion models. By modifying the training and sampling scheme, we show that diffusion models can perform lesion segmentation of medical images. To generate an image specific segmentation, we train the model on the ground truth segmentation… ▽ More Diffusion models have shown impressive performance for generative modelling of images. In this paper, we present a novel semantic segmentation method based on diffusion models. By modifying the training and sampling scheme, we show that diffusion models can perform lesion segmentation of medical images. To generate an image specific segmentation, we train the model on the ground truth segmentation, and use the image as a prior during training and in every step during the sampling process. With the given stochastic sampling process, we can generate a distribution of segmentation masks. This property allows us to compute pixel-wise uncertainty maps of the segmentation, and allows an implicit ensemble of segmentations that increases the segmentation performance. We evaluate our method on the BRATS2020 dataset for brain tumor segmentation. Compared to state-of-the-art segmentation models, our approach yields good segmentation results and, additionally, detailed uncertainty maps. △ Less

Submitted 27 December, 2021; v1 submitted 6 December, 2021; originally announced December 2021.

Comments: In this version, we updated the results section with more detailed evaluations

Learn to Ignore: Domain Adaptation for Multi-Site MRI Analysis

Authors: Julia Wolleb, Robin Sandkühler, Florentin Bieder, Muhamed Barakovic, Nouchine Hadjikhani, Athina Papadopoulou, Özgür Yaldizli, Jens Kuhle, Cristina Granziera, Philippe C. Cattin

Abstract: The limited availability of large image datasets, mainly due to data privacy and differences in acquisition protocols or hardware, is a significant issue in the development of accurate and generalizable machine learning methods in medicine. This is especially the case for Magnetic Resonance (MR) images, where different MR scanners introduce a bias that limits the performance of a machine learning… ▽ More The limited availability of large image datasets, mainly due to data privacy and differences in acquisition protocols or hardware, is a significant issue in the development of accurate and generalizable machine learning methods in medicine. This is especially the case for Magnetic Resonance (MR) images, where different MR scanners introduce a bias that limits the performance of a machine learning model. We present a novel method that learns to ignore the scanner-related features present in MR images, by introducing specific additional constraints on the latent space. We focus on a real-world classification scenario, where only a small dataset provides images of all classes. Our method \textit{Learn to Ignore (L2I)} outperforms state-of-the-art domain adaptation methods on a multi-site MR dataset for a classification task between multiple sclerosis patients and healthy controls. △ Less

Submitted 7 June, 2022; v1 submitted 13 October, 2021; originally announced October 2021.

Comparison of Methods Generalizing Max- and Average-Pooling

Authors: Florentin Bieder, Robin Sandkühler, Philippe C. Cattin

Abstract: Max- and average-pooling are the most popular pooling methods for downsampling in convolutional neural networks. In this paper, we compare different pooling methods that generalize both max- and average-pooling. Furthermore, we propose another method based on a smooth approximation of the maximum function and put it into context with related methods. For the comparison, we use a VGG16 image classi… ▽ More Max- and average-pooling are the most popular pooling methods for downsampling in convolutional neural networks. In this paper, we compare different pooling methods that generalize both max- and average-pooling. Furthermore, we propose another method based on a smooth approximation of the maximum function and put it into context with related methods. For the comparison, we use a VGG16 image classification network and train it on a large dataset of natural high-resolution images (Google Open Images v5). The results show that none of the more sophisticated methods perform significantly better in this classification task than standard max- or average-pooling. △ Less

Submitted 2 March, 2021; originally announced March 2021.

Comments: 16 pages, 6 figures

3D Segmentation Networks for Excessive Numbers of Classes: Distinct Bone Segmentation in Upper Bodies

Authors: Eva Schnider, Antal Horváth, Georg Rauter, Azhar Zam, Magdalena Müller-Gerbl, Philippe C. Cattin

Abstract: Segmentation of distinct bones plays a crucial role in diagnosis, planning, navigation, and the assessment of bone metastasis. It supplies semantic knowledge to visualisation tools for the planning of surgical interventions and the education of health professionals. Fully supervised segmentation of 3D data using Deep Learning methods has been extensively studied for many tasks but is usually restr… ▽ More Segmentation of distinct bones plays a crucial role in diagnosis, planning, navigation, and the assessment of bone metastasis. It supplies semantic knowledge to visualisation tools for the planning of surgical interventions and the education of health professionals. Fully supervised segmentation of 3D data using Deep Learning methods has been extensively studied for many tasks but is usually restricted to distinguishing only a handful of classes. With 125 distinct bones, our case includes many more labels than typical 3D segmentation tasks. For this reason, the direct adaptation of most established methods is not possible. This paper discusses the intricacies of training a 3D segmentation network in a many-label setting and shows necessary modifications in network architecture, loss function, and data augmentation. As a result, we demonstrate the robustness of our method by automatically segmenting over one hundred distinct bones simultaneously in an end-to-end learnt fashion from a CT-scan. △ Less

Submitted 14 October, 2020; originally announced October 2020.

Comments: 10 pages, 3 figures, 2 tables, accepted into MICCAI 2020 International Workshop on Machine Learning in Medical Imaging

Journal ref: Machine Learning in Medical Imaging. MLMI 2020. Lecture Notes in Computer Science, vol 12436. Springer, Cham

DeScarGAN: Disease-Specific Anomaly Detection with Weak Supervision

Authors: Julia Wolleb, Robin Sandkühler, Philippe C. Cattin

Abstract: Anomaly detection and localization in medical images is a challenging task, especially when the anomaly exhibits a change of existing structures, e.g., brain atrophy or changes in the pleural space due to pleural effusions. In this work, we present a weakly supervised and detail-preserving method that is able to detect structural changes of existing anatomical structures. In contrast to standard a… ▽ More Anomaly detection and localization in medical images is a challenging task, especially when the anomaly exhibits a change of existing structures, e.g., brain atrophy or changes in the pleural space due to pleural effusions. In this work, we present a weakly supervised and detail-preserving method that is able to detect structural changes of existing anatomical structures. In contrast to standard anomaly detection methods, our method extracts information about the disease characteristics from two groups: a group of patients affected by the same disease and a healthy control group. Together with identity-preserving mechanisms, this enables our method to extract highly disease-specific characteristics for a more detailed detection of structural changes. We designed a specific synthetic data set to evaluate and compare our method against state-of-the-art anomaly detection methods. Finally, we show the performance of our method on chest X-ray images. Our method called DeScarGAN outperforms other anomaly detection methods on the synthetic data set and by visual inspection on the chest X-ray image data set. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Accelerated Motion-Aware MR Imaging via Motion Prediction from K-Space Center

Authors: Christoph Jud, Damien Nguyen, Alina Giger, Robin Sandkühler, Miriam Krieger, Tony Lomax, Rares Salomir, Oliver Bieri, Philippe C. Cattin

Abstract: Motion has been a challenge for magnetic resonance (MR) imaging ever since the MR has been invented. Especially in volumetric imaging of thoracic and abdominal organs, motion-awareness is essential for reducing motion artifacts in the final image. A recently proposed MR imaging approach copes with motion by observing the motion patterns during the acquisition. Repetitive scanning of the k-space ce… ▽ More Motion has been a challenge for magnetic resonance (MR) imaging ever since the MR has been invented. Especially in volumetric imaging of thoracic and abdominal organs, motion-awareness is essential for reducing motion artifacts in the final image. A recently proposed MR imaging approach copes with motion by observing the motion patterns during the acquisition. Repetitive scanning of the k-space center region enables the extraction of the patient motion while acquiring the remaining part of the k-space. Due to highly redundant measurements of the center, the required scanning time of over 11 min and the reconstruction time of 2 h exceed clinical applicability though. We propose an accelerated motion-aware MR imaging method where the motion is inferred from small-sized k-space center patches and an initial training phase during which the characteristic movements are modeled. Thereby, acquisition times are reduced by a factor of almost 2 and reconstruction times by two orders of magnitude. Moreover, we improve the existing motion-aware approach with a systematic temporal shift correction to achieve a sharper image reconstruction. We tested our method on 12 volunteers and scanned their lungs and abdomen under free breathing. We achieved equivalent to higher reconstruction quality using the motion-prediction compared to the slower existing approach. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Recurrent Registration Neural Networks for Deformable Image Registration

Authors: Robin Sandkühler, Simon Andermatt, Grzegorz Bauman, Sylvia Nyilas, Christoph Jud, Philippe C. Cattin

Abstract: Parametric spatial transformation models have been successfully applied to image registration tasks. In such models, the transformation of interest is parameterized by a fixed set of basis functions as for example B-splines. Each basis function is located on a fixed regular grid position among the image domain, because the transformation of interest is not known in advance. As a consequence, not a… ▽ More Parametric spatial transformation models have been successfully applied to image registration tasks. In such models, the transformation of interest is parameterized by a fixed set of basis functions as for example B-splines. Each basis function is located on a fixed regular grid position among the image domain, because the transformation of interest is not known in advance. As a consequence, not all basis functions will necessarily contribute to the final transformation which results in a non-compact representation of the transformation. We reformulate the pairwise registration problem as a recursive sequence of successive alignments. For each element in the sequence, a local deformation defined by its position, shape, and weight is computed by our recurrent registration neural network. The sum of all local deformations yield the final spatial alignment of both images. Formulating the registration problem in this way allows the network to detect non-aligned regions in the images and to learn how to locally refine the registration properly. In contrast to current non-sequence-based registration methods, our approach iteratively applies local spatial deformations to the images until the desired registration accuracy is achieved. We trained our network on 2D magnetic resonance images of the lung and compared our method to a standard parametric B-spline registration. The experiments show, that our method performs on par for the accuracy but yields a more compact representation of the transformation. Furthermore, we achieve a speedup of around 15 compared to the B-spline registration. △ Less

Submitted 7 June, 2019; originally announced June 2019.

AirLab: Autograd Image Registration Laboratory

Authors: Robin Sandkühler, Christoph Jud, Simon Andermatt, Philippe C. Cattin

Abstract: Medical image registration is an active research topic and forms a basis for many medical image analysis tasks. Although image registration is a rather general concept specialized methods are usually required to target a specific registration problem. The development and implementation of such methods has been tough so far as the gradient of the objective has to be computed. Also, its evaluation h… ▽ More Medical image registration is an active research topic and forms a basis for many medical image analysis tasks. Although image registration is a rather general concept specialized methods are usually required to target a specific registration problem. The development and implementation of such methods has been tough so far as the gradient of the objective has to be computed. Also, its evaluation has to be performed preferably on a GPU for larger images and for more complex transformation models and regularization terms. This hinders researchers from rapid prototy** and poses hurdles to reproduce research results. There is a clear need for an environment which hides this complexity to put the modeling and the experimental exploration of registration methods into the foreground. With the "Autograd Image Registration Laboratory" (AIRLab), we introduce an open laboratory for image registration tasks, where the analytic gradients of the objective function are computed automatically and the device where the computations are performed, on a CPU or a GPU, is transparent. It is meant as a laboratory for researchers and developers enabling them to rapidly try out new ideas for registering images and to reproduce registration results which have already been published. AIRLab is implemented in Python using PyTorch as tensor and optimization library and SimpleITK for basic image IO. Therefore, it profits from recent advances made by the machine learning community concerning optimization and deep neural network models. The presented draft of this paper outlines AIRLab with first code snippets and performance analyses. A more exhaustive introduction will follow as a final version soon. △ Less

Submitted 2 March, 2020; v1 submitted 26 June, 2018; originally announced June 2018.

Comments: Corresponding author: Christoph Jud, e-mail: [email protected]

Multi-dimensional Gated Recurrent Units for Automated Anatomical Landmark Localization

Authors: Simon Andermatt, Simon Pezold, Michael Amann, Philippe C. Cattin

Abstract: We present an automated method for localizing an anatomical landmark in three-dimensional medical images. The method combines two recurrent neural networks in a coarse-to-fine approach: The first network determines a candidate neighborhood by analyzing the complete given image volume. The second network localizes the actual landmark precisely and accurately in the candidate neighborhood. Both netw… ▽ More We present an automated method for localizing an anatomical landmark in three-dimensional medical images. The method combines two recurrent neural networks in a coarse-to-fine approach: The first network determines a candidate neighborhood by analyzing the complete given image volume. The second network localizes the actual landmark precisely and accurately in the candidate neighborhood. Both networks take advantage of multi-dimensional gated recurrent units in their main layers, which allow for high model complexity with a comparatively small set of parameters. We localize the medullopontine sulcus in 3D magnetic resonance images of the head and neck. We show that the proposed approach outperforms similar localization techniques both in terms of mean distance in millimeters and voxels w.r.t. manual labelings of the data. With a mean localization error of 1.7 mm, the proposed approach performs on par with neurological experts, as we demonstrate in an interrater comparison. △ Less

Submitted 9 August, 2017; originally announced August 2017.

Comments: 8 pages, 3 figures, 1 table

Eye Tracker Accuracy: Quantitative Evaluation of the Invisible Eye Center Location

Authors: Stephan Wyder, Philippe C. Cattin

Abstract: Purpose. We present a new method to evaluate the accuracy of an eye tracker based eye localization system. Measuring the accuracy of an eye tracker's primary intention, the estimated point of gaze, is usually done with volunteers and a set of fixation points used as ground truth. However, verifying the accuracy of the location estimate of a volunteer's eye center in 3D space is not easily possible… ▽ More Purpose. We present a new method to evaluate the accuracy of an eye tracker based eye localization system. Measuring the accuracy of an eye tracker's primary intention, the estimated point of gaze, is usually done with volunteers and a set of fixation points used as ground truth. However, verifying the accuracy of the location estimate of a volunteer's eye center in 3D space is not easily possible. This is because the eye center is an intangible point hidden by the iris. Methods. We evaluate the eye location accuracy by using an eye phantom instead of eyes of volunteers. For this, we developed a testing stage with a realistic artificial eye and a corresponding kinematic model, which we trained with μCT data. This enables us to precisely evaluate the eye location estimate of an eye tracker. Results. We show that the proposed testing stage with the corresponding kinematic model is suitable for such a validation. Further, we evaluate a particular eye tracker based navigation system and show that this system is able to successfully determine the eye center with sub-millimeter accuracy. Conclusions. We show the suitability of the evaluated eye tracker for eye interventions, using the proposed testing stage and the corresponding kinematic model. The results further enable specific enhancement of the navigation system to potentially get even better results. △ Less

Submitted 22 May, 2017; originally announced May 2017.