-
Memory Capacity Analysis of Time-delay Reservoir Computing Based on Silicon Microring Resonator Nonlinearities
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Francesco Da Ros
Abstract:
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide…
▽ More
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide between the through and add ports of the MRR, it is possible to implement a time-delay RC (TDRC) with enhanced memory. The input from the through port is fed back into the add port of the ring with the delay applied by the external waveguide effectively adding memory. In a TDRC, the nodes are multiplexed in time, and their respective time evolutions are detected at the drop port. The performance of MRR-based TDRC is highly dependent on the amount of nonlinearity in the MRR. The nonlinear effects, in turn, are dependent on the physical properties of the MRR as they determine the lifetime of the effects. Another factor to take into account is the stability of the MRR response, as strong time-domain discontinuities at the drop port are known to emerge from FCD nonlinearities due to self-pulsing (high nonlinear behaviour). However, quantifying the right amount of nonlinearity that RC needs for a certain task in order to achieve optimum performance is challenging. Therefore, further analysis is required to fully understand the nonlinear dynamics of this TDRC setup. Here, we quantify the nonlinear and linear memory capacity of the previously described microring-based TDRC scheme, as a function of the time constants of the generated carriers and the thermal of the TO effects. We analyze the properties of the TDRC dynamics that generate the parameter space, in terms of input signal power and frequency detuning range, over which conventional RC tasks can be satisfactorily performed by the TDRC scheme.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
DROID: A Large-Scale In-The-Wild Robot Manipulation Dataset
Authors:
Alexander Khazatsky,
Karl Pertsch,
Suraj Nair,
Ashwin Balakrishna,
Sudeep Dasari,
Siddharth Karamcheti,
Soroush Nasiriany,
Mohan Kumar Srirama,
Lawrence Yunliang Chen,
Kirsty Ellis,
Peter David Fagan,
Joey Hejna,
Masha Itkina,
Marion Lepert,
Yecheng Jason Ma,
Patrick Tree Miller,
Jimmy Wu,
Suneel Belkhale,
Shivin Dass,
Huy Ha,
Arhan Jain,
Abraham Lee,
Youngwoon Lee,
Marius Memmel,
Sungjae Park
, et al. (74 additional authors not shown)
Abstract:
The creation of large, diverse, high-quality robot manipulation datasets is an important step** stone on the path toward more capable and robust robotic manipulation policies. However, creating such datasets is challenging: collecting robot manipulation data in diverse environments poses logistical and safety challenges and requires substantial investments in hardware and human labour. As a resu…
▽ More
The creation of large, diverse, high-quality robot manipulation datasets is an important step** stone on the path toward more capable and robust robotic manipulation policies. However, creating such datasets is challenging: collecting robot manipulation data in diverse environments poses logistical and safety challenges and requires substantial investments in hardware and human labour. As a result, even the most general robot manipulation policies today are mostly trained on data collected in a small number of environments with limited scene and task diversity. In this work, we introduce DROID (Distributed Robot Interaction Dataset), a diverse robot manipulation dataset with 76k demonstration trajectories or 350 hours of interaction data, collected across 564 scenes and 84 tasks by 50 data collectors in North America, Asia, and Europe over the course of 12 months. We demonstrate that training with DROID leads to policies with higher performance and improved generalization ability. We open source the full dataset, policy learning code, and a detailed guide for reproducing our robot hardware setup.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
Human-Centric Goal Reasoning with Ripple-Down Rules
Authors:
Kenji Brameld,
Germán Castro,
Claude Sammut,
Mark Roberts,
David W. Aha
Abstract:
ActorSim is a goal reasoning framework developed at the Naval Research Laboratory. Originally, all goal reasoning rules were hand-crafted. This work extends ActorSim with the capability of learning by demonstration, that is, when a human trainer disagrees with a decision made by the system, the trainer can take over and show the system the correct decision. The learning component uses Ripple-Down…
▽ More
ActorSim is a goal reasoning framework developed at the Naval Research Laboratory. Originally, all goal reasoning rules were hand-crafted. This work extends ActorSim with the capability of learning by demonstration, that is, when a human trainer disagrees with a decision made by the system, the trainer can take over and show the system the correct decision. The learning component uses Ripple-Down Rules (RDR) to build new decision rules to correctly handle similar cases in the future. The system is demonstrated using the RoboCup Rescue Agent Simulation, which simulates a city-wide disaster, requiring emergency services, including fire, ambulance and police, to be dispatched to different sites to evacuate civilians from dangerous situations. The RDRs are implemented in a scripting language, FrameScript, which is used to mediate between ActorSim and the agent simulator. Using Ripple-Down Rules, ActorSim can scale to an order of magnitude more goals than the previous version.
△ Less
Submitted 30 January, 2024;
originally announced February 2024.
-
TartanDrive 2.0: More Modalities and Better Infrastructure to Further Self-Supervised Learning Research in Off-Road Driving Tasks
Authors:
Matthew Sivaprakasam,
Parv Maheshwari,
Mateo Guaman Castro,
Samuel Triest,
Micah Nye,
Steve Willits,
Andrew Saba,
Wenshan Wang,
Sebastian Scherer
Abstract:
We present TartanDrive 2.0, a large-scale off-road driving dataset for self-supervised learning tasks. In 2021 we released TartanDrive 1.0, which is one of the largest datasets for off-road terrain. As a follow-up to our original dataset, we collected seven hours of data at speeds of up to 15m/s with the addition of three new LiDAR sensors alongside the original camera, inertial, GPS, and proprioc…
▽ More
We present TartanDrive 2.0, a large-scale off-road driving dataset for self-supervised learning tasks. In 2021 we released TartanDrive 1.0, which is one of the largest datasets for off-road terrain. As a follow-up to our original dataset, we collected seven hours of data at speeds of up to 15m/s with the addition of three new LiDAR sensors alongside the original camera, inertial, GPS, and proprioceptive sensors. We also release the tools we use for collecting, processing, and querying the data, including our metadata system designed to further the utility of our data. Custom infrastructure allows end users to reconfigure the data to cater to their own platforms. These tools and infrastructure alongside the dataset are useful for a variety of tasks in the field of off-road autonomy and, by releasing them, we encourage collaborative data aggregation. These resources lower the barrier to entry to utilizing large-scale datasets, thereby hel** facilitate the advancement of robotics in areas such as self-supervised learning, multi-modal perception, inverse reinforcement learning, and representation learning. The dataset is available at https://github.com/castacks/tartan drive 2.0.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
High-Dimensional Bayesian Optimisation with Large-Scale Constraints -- An Application to Aeroelastic Tailoring
Authors:
Hauke Maathuis,
Roeland De Breuker,
Saullo G. P. Castro
Abstract:
Design optimisation potentially leads to lightweight aircraft structures with lower environmental impact. Due to the high number of design variables and constraints, these problems are ordinarily solved using gradient-based optimisation methods, leading to a local solution in the design space while the global space is neglected. Bayesian Optimisation is a promising path towards sample-efficient, g…
▽ More
Design optimisation potentially leads to lightweight aircraft structures with lower environmental impact. Due to the high number of design variables and constraints, these problems are ordinarily solved using gradient-based optimisation methods, leading to a local solution in the design space while the global space is neglected. Bayesian Optimisation is a promising path towards sample-efficient, global optimisation based on probabilistic surrogate models. While Bayesian optimisation methods have demonstrated their strength for problems with a low number of design variables, the scalability to high-dimensional problems while incorporating large-scale constraints is still lacking. Especially in aeroelastic tailoring where directional stiffness properties are embodied into the structural design of aircraft, to control aeroelastic deformations and to increase the aerodynamic and structural performance, the safe operation of the system needs to be ensured by involving constraints resulting from different analysis disciplines. Hence, a global design space search becomes even more challenging. The present study attempts to tackle the problem by using high-dimensional Bayesian Optimisation in combination with a dimensionality reduction approach to solve the optimisation problem occurring in aeroelastic tailoring, presenting a novel approach for high-dimensional problems with large-scale constraints. Experiments on well-known benchmark cases with black-box constraints show that the proposed approach can incorporate large-scale constraints.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Wavelength-multiplexed Delayed Inputs for Memory Enhancement of Microring-based Reservoir Computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Francesco Da Ros
Abstract:
We numerically demonstrate a silicon add-drop microring-based reservoir computing scheme that combines parallel delayed inputs and wavelength division multiplexing. The scheme solves memory-demanding tasks like time-series prediction with good performance without requiring external optical feedback.
We numerically demonstrate a silicon add-drop microring-based reservoir computing scheme that combines parallel delayed inputs and wavelength division multiplexing. The scheme solves memory-demanding tasks like time-series prediction with good performance without requiring external optical feedback.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Overview of LiLAS 2020 -- Living Labs for Academic Search
Authors:
Philipp Schaer,
Johann Schaible,
Leyla Jael Garcia Castro
Abstract:
Academic Search is a timeless challenge that the field of Information Retrieval has been dealing with for many years. Even today, the search for academic material is a broad field of research that recently started working on problems like the COVID-19 pandemic. However, test collections and specialized data sets like CORD-19 only allow for system-oriented experiments, while the evaluation of algor…
▽ More
Academic Search is a timeless challenge that the field of Information Retrieval has been dealing with for many years. Even today, the search for academic material is a broad field of research that recently started working on problems like the COVID-19 pandemic. However, test collections and specialized data sets like CORD-19 only allow for system-oriented experiments, while the evaluation of algorithms in real-world environments is only available to researchers from industry. In LiLAS, we open up two academic search platforms to allow participating research to evaluate their systems in a Docker-based research environment. This overview paper describes the motivation, infrastructure, and two systems LIVIVO and GESIS Search that are part of this CLEF lab.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Multi-Task Wavelength-Multiplexed Reservoir Computing Using a Silicon Microring Resonator
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on…
▽ More
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on the same photonic circuit. In particular, we consider a microring-based time-delay reservoir computing (TDRC) scheme that simultaneously solves three tasks: Time-series prediction, classification, and wireless channel equalization. The scheme relies on time-division multiplexing to avoid the necessity of multiple physical nonlinear nodes, while the tasks are parallelized using wavelength division multiplexing (WDM). The input data modulated on each optical channel is mapped to a higher dimensional space by the nonlinear dynamics of the silicon microring cavity. The carrier wavelength and input power assigned to each optical channel have a high influence on the performance of its respective task. When all tasks operate under the same wavelength/power conditions, our results show that the computing nature of each task is the deciding factor of the level of performance achievable. However, it is possible to achieve good performance for all tasks simultaneously by optimizing the parameters of each optical channel. The variety of applications covered by the tasks shows the versatility of the proposed photonic TDRC scheme. Overall, this work provides insight into the potential of WDM-based schemes for improving the computing capabilities of reservoir computing schemes.
△ Less
Submitted 27 April, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Effects of cavity nonlinearities and linear losses on silicon microring-based reservoir computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series t…
▽ More
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series task NARMA-10. We demonstrate the existence of three regions, defined by the input power and the frequency detuning between the optical source and the microring resonance, that reveal the cavity transition from linear to nonlinear regimes. One of these regions offers very low error in time-series prediction under relatively low input power and number of nodes while the other regions either lack nonlinearity or become unstable. This study provides insight into the design of the MRR and the optimization of its physical properties for improving the prediction performance of time-delay reservoir computing.
△ Less
Submitted 22 December, 2023; v1 submitted 13 October, 2023;
originally announced October 2023.
-
Open X-Embodiment: Robotic Learning Datasets and RT-X Models
Authors:
Open X-Embodiment Collaboration,
Abby O'Neill,
Abdul Rehman,
Abhinav Gupta,
Abhiram Maddukuri,
Abhishek Gupta,
Abhishek Padalkar,
Abraham Lee,
Acorn Pooley,
Agrim Gupta,
Ajay Mandlekar,
A**kya Jain,
Albert Tung,
Alex Bewley,
Alex Herzog,
Alex Irpan,
Alexander Khazatsky,
Anant Rai,
Anchit Gupta,
Andrew Wang,
Andrey Kolobov,
Anikait Singh,
Animesh Garg,
Aniruddha Kembhavi,
Annie Xie
, et al. (267 additional authors not shown)
Abstract:
Large, high-capacity models trained on diverse datasets have shown remarkable successes on efficiently tackling downstream applications. In domains from NLP to Computer Vision, this has led to a consolidation of pretrained models, with general pretrained backbones serving as a starting point for many applications. Can such a consolidation happen in robotics? Conventionally, robotic learning method…
▽ More
Large, high-capacity models trained on diverse datasets have shown remarkable successes on efficiently tackling downstream applications. In domains from NLP to Computer Vision, this has led to a consolidation of pretrained models, with general pretrained backbones serving as a starting point for many applications. Can such a consolidation happen in robotics? Conventionally, robotic learning methods train a separate model for every application, every robot, and even every environment. Can we instead train generalist X-robot policy that can be adapted efficiently to new robots, tasks, and environments? In this paper, we provide datasets in standardized data formats and models to make it possible to explore this possibility in the context of robotic manipulation, alongside experimental results that provide an example of effective X-robot policies. We assemble a dataset from 22 different robots collected through a collaboration between 21 institutions, demonstrating 527 skills (160266 tasks). We show that a high-capacity model trained on this data, which we call RT-X, exhibits positive transfer and improves the capabilities of multiple robots by leveraging experience from other platforms. More details can be found on the project website https://robotics-transformer-x.github.io.
△ Less
Submitted 1 June, 2024; v1 submitted 13 October, 2023;
originally announced October 2023.
-
Impact of Free-carrier Nonlinearities on Silicon Microring-based Reservoir Computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
We quantify the impact of thermo-optic and free-carrier effects on time-delay reservoir computing using a silicon microring resonator. We identify pump power and frequency detuning ranges with NMSE less than 0.05 for the NARMA-10 task depending on the time constants of the two considered effects.
We quantify the impact of thermo-optic and free-carrier effects on time-delay reservoir computing using a silicon microring resonator. We identify pump power and frequency detuning ranges with NMSE less than 0.05 for the NARMA-10 task depending on the time constants of the two considered effects.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
An explainable model to support the decision about the therapy protocol for AML
Authors:
Jade M. Almeida,
Giovanna A. Castro,
João A. Machado-Neto,
Tiago A. Almeida
Abstract:
Acute Myeloid Leukemia (AML) is one of the most aggressive types of hematological neoplasm. To support the specialists' decision about the appropriate therapy, patients with AML receive a prognostic of outcomes according to their cytogenetic and molecular characteristics, often divided into three risk categories: favorable, intermediate, and adverse. However, the current risk classification has kn…
▽ More
Acute Myeloid Leukemia (AML) is one of the most aggressive types of hematological neoplasm. To support the specialists' decision about the appropriate therapy, patients with AML receive a prognostic of outcomes according to their cytogenetic and molecular characteristics, often divided into three risk categories: favorable, intermediate, and adverse. However, the current risk classification has known problems, such as the heterogeneity between patients of the same risk group and no clear definition of the intermediate risk category. Moreover, as most patients with AML receive an intermediate-risk classification, specialists often demand other tests and analyses, leading to delayed treatment and worsening of the patient's clinical condition. This paper presents the data analysis and an explainable machine-learning model to support the decision about the most appropriate therapy protocol according to the patient's survival prediction. In addition to the prediction model being explainable, the results obtained are promising and indicate that it is possible to use it to support the specialists' decisions safely. Most importantly, the findings offered in this study have the potential to open new avenues of research toward better treatments and prognostic markers.
△ Less
Submitted 15 July, 2023; v1 submitted 5 July, 2023;
originally announced July 2023.
-
Learning Risk-Aware Costmaps via Inverse Reinforcement Learning for Off-Road Navigation
Authors:
Samuel Triest,
Mateo Guaman Castro,
Parv Maheshwari,
Matthew Sivaprakasam,
Wenshan Wang,
Sebastian Scherer
Abstract:
The process of designing costmaps for off-road driving tasks is often a challenging and engineering-intensive task. Recent work in costmap design for off-road driving focuses on training deep neural networks to predict costmaps from sensory observations using corpora of expert driving data. However, such approaches are generally subject to over-confident mispredictions and are rarely evaluated in-…
▽ More
The process of designing costmaps for off-road driving tasks is often a challenging and engineering-intensive task. Recent work in costmap design for off-road driving focuses on training deep neural networks to predict costmaps from sensory observations using corpora of expert driving data. However, such approaches are generally subject to over-confident mispredictions and are rarely evaluated in-the-loop on physical hardware. We present an inverse reinforcement learning-based method of efficiently training deep cost functions that are uncertainty-aware. We do so by leveraging recent advances in highly parallel model-predictive control and robotic risk estimation. In addition to demonstrating improvement at reproducing expert trajectories, we also evaluate the efficacy of these methods in challenging off-road navigation scenarios. We observe that our method significantly outperforms a geometric baseline, resulting in 44% improvement in expert path reconstruction and 57% fewer interventions in practice. We also observe that varying the risk tolerance of the vehicle results in qualitatively different navigation behaviors, especially with respect to higher-risk scenarios such as slopes and tall grass.
△ Less
Submitted 31 January, 2023;
originally announced February 2023.
-
How Does It Feel? Self-Supervised Costmap Learning for Off-Road Vehicle Traversability
Authors:
Mateo Guaman Castro,
Samuel Triest,
Wenshan Wang,
Jason M. Gregory,
Felix Sanchez,
John G. Rogers III,
Sebastian Scherer
Abstract:
Estimating terrain traversability in off-road environments requires reasoning about complex interaction dynamics between the robot and these terrains. However, it is challenging to create informative labels to learn a model in a supervised manner for these interactions. We propose a method that learns to predict traversability costmaps by combining exteroceptive environmental information with prop…
▽ More
Estimating terrain traversability in off-road environments requires reasoning about complex interaction dynamics between the robot and these terrains. However, it is challenging to create informative labels to learn a model in a supervised manner for these interactions. We propose a method that learns to predict traversability costmaps by combining exteroceptive environmental information with proprioceptive terrain interaction feedback in a self-supervised manner. Additionally, we propose a novel way of incorporating robot velocity in the costmap prediction pipeline. We validate our method in multiple short and large-scale navigation tasks on challenging off-road terrains using two different large, all-terrain robots. Our short-scale navigation results show that using our learned costmaps leads to overall smoother navigation, and provides the robot with a more fine-grained understanding of the robot-terrain interactions. Our large-scale navigation trials show that we can reduce the number of interventions by up to 57% compared to an occupancy-based navigation baseline in challenging off-road courses ranging from 400 m to 3150 m. Appendix and full experiment videos can be found in our website: https://mateoguaman.github.io/hdif.
△ Less
Submitted 14 February, 2023; v1 submitted 22 September, 2022;
originally announced September 2022.
-
Effects of Visualizing Technical Debts on a Software Maintenance Project
Authors:
Ronivon Dias,
Pedro Neto,
Irvayne Ibiapina,
Guilherme Avelino e Otavio Castro
Abstract:
The technical debt (TD) metaphor is widely used to encapsulate numerous software quality problems. She describes the trade-off between the short term benefit of taking a shortcut during the design or implementation phase of a software product (for example, in order to meet a deadline) and the long term consequences of taking said shortcut, which may affect the quality of the software product. TDs…
▽ More
The technical debt (TD) metaphor is widely used to encapsulate numerous software quality problems. She describes the trade-off between the short term benefit of taking a shortcut during the design or implementation phase of a software product (for example, in order to meet a deadline) and the long term consequences of taking said shortcut, which may affect the quality of the software product. TDs must be managed to guarantee the software quality and also reduce its maintenance and evolution costs. However, the tools for TD detection usually provide results only considering the files perspective (class and methods), that is not usual during the project management. In this work, a technique is proposed to identify/visualize TD on a new perspective: software features. The proposed technique adopts Mining Software Repository (MRS) tools to identify the software features and after the technical debts that affect these features. Additionally, we also proposed an approach to support maintenance tasks guided by TD visualization at the feature level aiming to evaluate its applicability on real software projects. The results indicate that the approach can be useful to decrease the existent TDs, as well as avoid the introduction of new TDs.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
Directional Measurements in Urban Street Canyons from Macro Rooftop Sites at 28 GHz for 90% Outdoor Coverage
Authors:
**feng Du,
Dmitry Chizhik,
Reinaldo A. Valenzuela,
Rodolfo Feick,
Guillermo Castro,
Mauricio Rodriguez,
Tingjun Chen,
Manav Kohli,
Gil Zussman
Abstract:
Path gain and effective directional gain in azimuth in urban canyons from actual rooftop base station sites are characterized based on a massive data set of 3000 links on 12 streets in two cities, with over 21 million individual continuous wave power measurements at 28 GHz using vertically polarized antennas. Large street-to-street path gain variation is found, with median street path gain varying…
▽ More
Path gain and effective directional gain in azimuth in urban canyons from actual rooftop base station sites are characterized based on a massive data set of 3000 links on 12 streets in two cities, with over 21 million individual continuous wave power measurements at 28 GHz using vertically polarized antennas. Large street-to-street path gain variation is found, with median street path gain varying over 30 dB at similar distances. Coverage in the street directly illuminated by a roof edge antenna is found to suffer an average excess loss of 11 dB relative to free space at 200 m, with empirical slope-intercept fit model representing the data with 7.1 dB standard deviation. Offsetting the base antenna 5 m away from roof edge, as is common in macro cellular deployments, introduces an additional average loss of 15 dB at 100 m, but this additional loss reduces with distance. Around the corner loss is well modeled by a diffraction formula with an empirically obtained diffraction coefficient. Effective azimuthal gain degradation due to scatter is limited to 2 dB for 90% of data, supporting effective use of high gain antennas in urban street canyons.
△ Less
Submitted 10 November, 2020; v1 submitted 1 August, 2019;
originally announced August 2019.
-
Suburban Fixed Wireless Access Channel Measurements and Models at 28 GHz for 90% Outdoor Coverage
Authors:
**feng Du,
Dmitry Chizhik,
Rodolfo Feick,
Mauricio Rodriguez,
Guillermo Castro,
Reinaldo. A. Valenzuela
Abstract:
Achieving adequate coverage with high gain antennas is key to realizing the full promise of the wide bandwidth available at cm/mm bands. We report extensive outdoor measurements at 28 GHz in suburban residential areas in New Jersey and Chile, with over 2000 links measured for same-street link types (vegetation blocked LOS) from 13 streets and other-street link types (true NLOS) from 7 streets, usi…
▽ More
Achieving adequate coverage with high gain antennas is key to realizing the full promise of the wide bandwidth available at cm/mm bands. We report extensive outdoor measurements at 28 GHz in suburban residential areas in New Jersey and Chile, with over 2000 links measured for same-street link types (vegetation blocked LOS) from 13 streets and other-street link types (true NLOS) from 7 streets, using a specialized narrowband channel sounder at ranges reaching 200 m. The measurements, applicable to fixed wireless access, involved a 55$^\circ$ transmit antenna placed on the exterior of a street-facing window and a 10$^\circ$ receive horn antenna spinning on top of a van mast at 3 m height, emulating a lamppost-mounted base station. Measured path gain-distance dependence is well represented by power-law models, and azimuth gains at the base are degraded through scattering by more than 4.3 dB for 10% of links. It was found that, with 51 dBm EIRP at the base station and 11 dBi antenna at an outdoor mounted terminal, 1 Gbps downlink rate can be delivered up to 100 m from a base station deployed in the same street with 90% coverage guarantee.
△ Less
Submitted 14 October, 2019; v1 submitted 10 July, 2018;
originally announced July 2018.
-
Suburban Residential Building Penetration Loss at 28 GHz for Fixed Wireless Access
Authors:
**feng Du,
Dmitry Chizhik,
Rodolfo Feick,
Guillermo Castro,
Mauricio Rodríguez,
Reinaldo A. Valenzuela
Abstract:
Fixed wireless access at mm/cm bands has been proposed for high-speed broadband access to suburban residential customers and building penetration loss is a key parameter. We report a measurement campaign at 28 GHz in a New Jersey suburban residential neighborhood for three representative single-family homes. A base antenna is mounted at 3-meter height, emulating a base station on a lamppost, moves…
▽ More
Fixed wireless access at mm/cm bands has been proposed for high-speed broadband access to suburban residential customers and building penetration loss is a key parameter. We report a measurement campaign at 28 GHz in a New Jersey suburban residential neighborhood for three representative single-family homes. A base antenna is mounted at 3-meter height, emulating a base station on a lamppost, moves down the street up to 200 meters. A customer premises equipment (CPE) device, acting as relay to provide indoor coverage throughout the desired area, is mounted either on the exterior of a street-facing window or 1.5 meters behind the window. The median indoor-outdoor path gain difference, corresponding to the extra loss by moving the window-mounted CPE indoor, is found to be 9 dB for the house with low-loss materials and plain-glass windows, and 17 dB for the house with low-emissivity windows and foil-backed insulation. These losses are in addition to other losses (e.g., vegetation blockage) in comparison to free space propagation.
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
Path Loss and Directional Gain Measurements at 28 GHz for non-Line-of-Sight Coverage of Indoors with Corridors
Authors:
Dmitry Chizhik,
**feng Du,
Rodolfo Feick,
Mauricio Rodriguez,
Guillermo Castro,
Reinaldo. A. Valenzuela
Abstract:
Adequate coverage with high gain antennas is key to realizing the full promise of the bandwidth available at mm/cm wave bands. We report extensive indoor measurements at 28 GHz (1000 links, 9.9 million individual power measurements, 10 offices, 2 buildings), with/without line-of-sight (LOS) using a continuous wave channel sounder, with a 10o spinning horn, capable of capturing a full azimuth scan…
▽ More
Adequate coverage with high gain antennas is key to realizing the full promise of the bandwidth available at mm/cm wave bands. We report extensive indoor measurements at 28 GHz (1000 links, 9.9 million individual power measurements, 10 offices, 2 buildings), with/without line-of-sight (LOS) using a continuous wave channel sounder, with a 10o spinning horn, capable of capturing a full azimuth scan every 200 ms, in up to 171 dB path loss to characterize coverage with 90% confidence level. The environment had prominent corridors and rooms, as opposed to open/mixed offices in latest 3GPP standards. Guiding in corridors leads to much lower RMS azimuth spread (7 degree median in corridor non-LOS vs. 42 degree in 3GPP) and higher penetration loss into rooms and around corners (30-32 dB, some 12 dB more loss than 3GPP at 20 m non-LOS). Measured path gain in non-LOS is predicted by a mode-diffusion model with 3.9 dB RMS error. Scattering degraded azimuth gain by up to 4 dB in the corridor and 7 dB in rooms with 90% probability. Link simulations in a canonical building indicate every corridor needs an access point to provide 1 Gbps rate to adjoining rooms within 50 m using 400 MHz of bandwidth.
△ Less
Submitted 4 February, 2020; v1 submitted 18 December, 2017;
originally announced December 2017.
-
A Study on the Effect of Exit Widths and Crowd Sizes in the Formation of Arch in Clogged Crowds
Authors:
Francisco Enrique Vicente G. Castro,
Jaderick P. Pabico
Abstract:
The arching phenomenon is an emergent pattern formed by a $c$-sized crowd of intelligent, goal-oriented, autonomous, heterogeneous individuals moving towards a $w$-wide exit along a long $W$-wide corridor, where $W>w$. We collected empirical data from microsimulations to identify the combination effects of~$c$ and~$w$ to the time~$T$ of the onset of and the size~$S$ of the formation of the arch. T…
▽ More
The arching phenomenon is an emergent pattern formed by a $c$-sized crowd of intelligent, goal-oriented, autonomous, heterogeneous individuals moving towards a $w$-wide exit along a long $W$-wide corridor, where $W>w$. We collected empirical data from microsimulations to identify the combination effects of~$c$ and~$w$ to the time~$T$ of the onset of and the size~$S$ of the formation of the arch. The arch takes on the form of the perimeter of a half ellipse halved along the minor axis. We measured the~$S$ with respect to the lengths of the major~$M$ and minor~$m$ axes of the ellipse, respectively. The mathematical description of the formation of this phenomenon will be an important information in the design of walkways to control and easily direct the flow of large crowds, especially during panic egress conditions.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Microsimulations of Arching, Clogging, and Bursty Exit Phenomena in Crowd Dynamics
Authors:
Francisco Enrique Vicente G. Castro,
Jaderick P. Pabico
Abstract:
We present in this paper the behavior of an artificial agent who is a member of a crowd. The behavior is based on the social comparison theory, as well as the trajectory map** towards an agent's goal considering the agent's field of vision. The crowd of artificial agents were able to exhibit arching, clogging, and bursty exit rates. We were also able to observe a new phenomenon we called double…
▽ More
We present in this paper the behavior of an artificial agent who is a member of a crowd. The behavior is based on the social comparison theory, as well as the trajectory map** towards an agent's goal considering the agent's field of vision. The crowd of artificial agents were able to exhibit arching, clogging, and bursty exit rates. We were also able to observe a new phenomenon we called double arching, which happens towards the end of the simulation, and whose onset is exhibited by a "calm" density graph within the exit passage. The density graph is usually bursty at this area. Because of these exhibited phenomena, we can use these agents with high confidence to perform microsimulation studies for modeling the behavior of humans and objects in very realistic ways.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
