-
Ensuring Data Privacy in AC Optimal Power Flow with a Distributed Co-Simulation Framework
Authors:
Xinliang Dai,
Alexander Kocher,
Jovana Kovačević,
Burak Dindar,
Yuning Jiang,
Colin N. Jones,
Hüseyin Çakmak,
Veit Hagenmeyer
Abstract:
During the energy transition, the significance of collaborative management among institutions is rising, confronting challenges posed by data privacy concerns. Prevailing research on distributed approaches, as an alternative to centralized management, often lacks numerical convergence guarantees or is limited to single-machine numerical simulation. To address this, we present a distributed approac…
▽ More
During the energy transition, the significance of collaborative management among institutions is rising, confronting challenges posed by data privacy concerns. Prevailing research on distributed approaches, as an alternative to centralized management, often lacks numerical convergence guarantees or is limited to single-machine numerical simulation. To address this, we present a distributed approach for solving AC Optimal Power Flow (OPF) problems within a geographically distributed environment. This involves integrating the energy system Co-Simulation (eCoSim) module in the eASiMOV framework with the convergence-guaranteed distributed optimization algorithm, i.e., the Augmented Lagrangian based Alternating Direction Inexact Newton method (ALADIN). Comprehensive evaluations across multiple system scenarios reveal a marginal performance slowdown compared to the centralized approach and the distributed approach executed on single machines -- a justified trade-off for enhanced data privacy. This investigation serves as empirical validation of the successful execution of distributed AC OPF within a geographically distributed environment, highlighting potential directions for future research.
△ Less
Submitted 15 March, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Open Data-Driven Automation of Residential Distribution Grid Modeling with Minimal Data Requirements
Authors:
Moritz Weber,
Luc Janecke,
Hüseyin K. Çakmak,
Veit Hagenmeyer
Abstract:
In the present paper, we introduce a new method for the automated generation of residential distribution grid models based on novel building load estimation methods and a two-stage optimization for the generation of the 20 kV and 400 V grid topologies. Using the introduced load estimation methods, various open or proprietary data sources can be utilized to estimate the load of residential building…
▽ More
In the present paper, we introduce a new method for the automated generation of residential distribution grid models based on novel building load estimation methods and a two-stage optimization for the generation of the 20 kV and 400 V grid topologies. Using the introduced load estimation methods, various open or proprietary data sources can be utilized to estimate the load of residential buildings. These data sources include available building footprints from OpenStreetMap, 3D building data from OSM Buildings, and the number of electricity meters per address provided by the respective distribution system operator (DSO).
For the evaluation of the introduced methods, we compare the resulting grid models by utilizing different available data sources for a specific suburban residential area and the real grid topology provided by the DSO. This evaluation yields two key findings: First, the automated 20 kV network generation methodology works well when compared to the real network. Second, the utilization of public 3D building data for load estimation significantly increases the resulting model accuracy compared to 2D data and enables results similar to models based on DSO-supplied meter data. This substantially reduces the dependence on such normally proprietary data.
△ Less
Submitted 12 December, 2023; v1 submitted 11 December, 2023;
originally announced December 2023.
-
Automated generation of large-scale distribution grid models based on open data and open source software using an optimization approach
Authors:
Hüseyin K. Çakmak,
Luc Janecke,
Veit Hagenmeyer
Abstract:
The increasing share of renewable energy sources on distribution grid level as well as the emerging active role of prosumers lead to both higher distribution grid utilization, and at the same time greater unpredictability of energy generation and consumption. This poses major problems for grid operators in view of, e.g., voltage stability and line (over)loading. Thus, detailed and comprehensive si…
▽ More
The increasing share of renewable energy sources on distribution grid level as well as the emerging active role of prosumers lead to both higher distribution grid utilization, and at the same time greater unpredictability of energy generation and consumption. This poses major problems for grid operators in view of, e.g., voltage stability and line (over)loading. Thus, detailed and comprehensive simulation models are essential for planning future distribution grid expansion in view of the expected strong electrification of society. In this context, the contribution of the present paper is a new, more refined method for automated creation of large-scale detailed distribution grid models based solely on publicly available GIS and statistical data. Utilizing the street layouts in Open Street Maps as potential cable routes, a graph representation is created and complemented by residential units that are extracted from the same data source. This graph structure is adjusted to match electrical low-voltage grid topology by solving a variation of the minimum cost flow linear optimization problem with provided data on secondary substations. In a final step, the generated grid representation is transferred to a DIgSILENT PowerFactory model with photovoltaic systems. The presented workflow uses open source software and is fully automated and scalable that allows the generation of ready-to-use distribution grid simulation models for given 20kV substation locations and additional data on residential unit properties for improved results. The performance of the developed method with respect to grid utilization is presented for a selected suburban residential area with power flow simulations for eight scenarios including current residential PV installation and a future scenario with full PV expansion. Furthermore, the suitability of the generated models for quasi-dynamic simulations is shown.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
Data-Driven Copy-Paste Imputation for Energy Time Series
Authors:
Moritz Weber,
Marian Turowski,
Hüseyin K. Çakmak,
Ralf Mikut,
Uwe Kühnapfel,
Veit Hagenmeyer
Abstract:
A cornerstone of the worldwide transition to smart grids are smart meters. Smart meters typically collect and provide energy time series that are vital for various applications, such as grid simulations, fault-detection, load forecasting, load analysis, and load management. Unfortunately, these time series are often characterized by missing values that must be handled before the data can be used.…
▽ More
A cornerstone of the worldwide transition to smart grids are smart meters. Smart meters typically collect and provide energy time series that are vital for various applications, such as grid simulations, fault-detection, load forecasting, load analysis, and load management. Unfortunately, these time series are often characterized by missing values that must be handled before the data can be used. A common approach to handle missing values in time series is imputation. However, existing imputation methods are designed for power time series and do not take into account the total energy of gaps, resulting in jumps or constant shifts when imputing energy time series. In order to overcome these issues, the present paper introduces the new Copy-Paste Imputation (CPI) method for energy time series. The CPI method copies data blocks with similar properties and pastes them into gaps of the time series while preserving the total energy of each gap. The new method is evaluated on a real-world dataset that contains six shares of artificially inserted missing values between 1 and 30%. It outperforms by far the three benchmark imputation methods selected for comparison. The comparison furthermore shows that the CPI method uses matching patterns and preserves the total energy of each gap while requiring only a moderate run-time.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
A Comparison of Partitioning Strategies in AC Optimal Power Flow
Authors:
Alexander Murray,
Michael Kyesswa,
Philipp Schmurr,
Hüseyin K Çakmak,
Veit Hagenmeyer
Abstract:
The highly non-convex AC optimal power flow problem is known to scale very poorly with respect to the number of lines and buses. To achieve improved computational speed and scalability, we apply a distributed optimization algorithm, the so-called Augmented Lagrangian based Alternating Direction Inexact Newton (ALADIN) method. However, the question of how to optimally partition a power grid for use…
▽ More
The highly non-convex AC optimal power flow problem is known to scale very poorly with respect to the number of lines and buses. To achieve improved computational speed and scalability, we apply a distributed optimization algorithm, the so-called Augmented Lagrangian based Alternating Direction Inexact Newton (ALADIN) method. However, the question of how to optimally partition a power grid for use in distributed optimization remains open in the literature. In the present paper, we compare four partitioning strategies using the standard IEEE 9, 14, 30, 39, 57, 118, 300 bus models as the performance benchmark. To this end, we apply the graph partitioners KaFFPa and METIS as well as two spectral clustering methods to the aforementioned bus models. For larger grids, KaFFPa yields the best results on average.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Proceedings of eNTERFACE 2015 Workshop on Intelligent Interfaces
Authors:
Matei Mancas,
Christian Frisson,
Joëlle Tilmanne,
Nicolas d'Alessandro,
Petr Barborka,
Furkan Bayansar,
Francisco Bernard,
Rebecca Fiebrink,
Alexis Heloir,
Edgar Hemery,
Sohaib Laraba,
Alexis Moinet,
Fabrizio Nunnari,
Thierry Ravet,
Loïc Reboursière,
Alvaro Sarasua,
Mickaël Tits,
Noé Tits,
François Zajéga,
Paolo Alborno,
Ksenia Kolykhalova,
Emma Frid,
Damiano Malafronte,
Lisanne Huis in't Veld,
Hüseyin Cakmak
, et al. (49 additional authors not shown)
Abstract:
The 11th Summer Workshop on Multimodal Interfaces eNTERFACE 2015 was hosted by the Numediart Institute of Creative Technologies of the University of Mons from August 10th to September 2015. During the four weeks, students and researchers from all over the world came together in the Numediart Institute of the University of Mons to work on eight selected projects structured around intelligent interf…
▽ More
The 11th Summer Workshop on Multimodal Interfaces eNTERFACE 2015 was hosted by the Numediart Institute of Creative Technologies of the University of Mons from August 10th to September 2015. During the four weeks, students and researchers from all over the world came together in the Numediart Institute of the University of Mons to work on eight selected projects structured around intelligent interfaces. Eight projects were selected and their reports are shown here.
△ Less
Submitted 19 January, 2018;
originally announced January 2018.