Showing 1–7 of 7 results for author: Breza, M

IRONWAN: Increasing Reliability of Overlap** Networks in LoRaWAN

Authors: Laksh Bhatia, Po-Yu Chen, Michael Breza, Cong Zhao, Julie A. McCann

Abstract: LoRaWAN deployments follow an ad-hoc deployment model that has organically led to overlap** communication networks, sharing the wireless spectrum, and completely unaware of each other. LoRaWAN uses ALOHA-style communication where it is almost impossible to schedule transmission between networks belonging to different owners properly. The inability to schedule overlap** networks will cause inte… ▽ More LoRaWAN deployments follow an ad-hoc deployment model that has organically led to overlap** communication networks, sharing the wireless spectrum, and completely unaware of each other. LoRaWAN uses ALOHA-style communication where it is almost impossible to schedule transmission between networks belonging to different owners properly. The inability to schedule overlap** networks will cause inter-network interference, which will increase node-to-gateway message losses and gateway-to-node acknowledgement failures. This problem is likely to get worse as the number of LoRaWAN networks increase. In response to this problem, we propose IRONWAN, a wireless overlay network that shares communication resources without modifications to underlying protocols. It utilises the broadcast nature of radio communication and enables gateway-to-gateway communication to facilitate the search for failed messages and transmit failed acknowledgements already received and cached in overlap** network's gateways. IRONWAN uses two novel algorithms, a Real-time Message Inter-arrival Predictor, to highlight when a server has not received an expected uplink message. The Interference Predictor ensures that extra gateway-to-gateway communication does not negatively impact communication bandwidth. We evaluate IRONWAN on a 1000-node simulator with up to ten gateways and a 10-node testbed with 2-gateways. Results show that IRONWAN can achieve up to 12\% higher packet delivery ratio (PDR) and total messages received per node while increasing the minimum PDR by up to 28\%. These improvements save up to 50\% node's energy. Finally, we demonstrate that IRONWAN has comparable performance to an optimal solution (wired, centralised) but with 2-32 times lower communication costs. IRONWAN also has up to 14\% better PDR when compared to FLIP, a wired-distributed gateway-to-gateway protocol in certain scenarios. △ Less

Submitted 19 November, 2021; originally announced November 2021.

Comments: Accepted for publication at IEEE Internet of Things Journal

Dataset: LoED: The LoRaWAN at the Edge Dataset

Authors: Laksh Bhatia, Michael Breza, Ramona Marfievici, Julie A. McCann

Abstract: This paper presents the LoRaWAN at the Edge Dataset (LoED), an open LoRaWAN packet dataset collected at gateways. Real-world LoRaWAN datasets are important for repeatable sensor-network and communications research and evaluation as, if carefully collected, they provide realistic working assumptions. LoED data is collected from nine gateways over a four month period in a dense urban environment. Th… ▽ More This paper presents the LoRaWAN at the Edge Dataset (LoED), an open LoRaWAN packet dataset collected at gateways. Real-world LoRaWAN datasets are important for repeatable sensor-network and communications research and evaluation as, if carefully collected, they provide realistic working assumptions. LoED data is collected from nine gateways over a four month period in a dense urban environment. The dataset contains packet header information and all physical layer properties reported by gateways such as the CRC, RSSI, SNR and spreading factor. Files are provided to analyse the data and get aggregated statistics. The dataset is available at: doi.org/10.5281/zenodo.4121430 △ Less

Submitted 27 October, 2020; originally announced October 2020.

Comments: Accepted for publication at The 3rd International SenSys+BuildSys Workshop on Data: Acquisition to Analysis (DATA '20)

Control Communication Co-Design for Wide Area Cyber-Physical Systems

Authors: Laksh Bhatia, Ivana Tomić, Anqi Fu, Michael Breza, Julie A. McCann

Abstract: Wide Area Cyber-Physical Systems (WA-CPSs) are a class of control systems that integrate low-powered sensors, heterogeneous actuators and computer controllers into large infrastructure that span multi-kilometre distances. Current wireless communication technologies are incapable of meeting the communication requirements of range and bounded delays needed for the control of WA-CPSs. To solve this p… ▽ More Wide Area Cyber-Physical Systems (WA-CPSs) are a class of control systems that integrate low-powered sensors, heterogeneous actuators and computer controllers into large infrastructure that span multi-kilometre distances. Current wireless communication technologies are incapable of meeting the communication requirements of range and bounded delays needed for the control of WA-CPSs. To solve this problem, we use a Control-Communication Co-design approach for WA-CPSs, that we refer to as the $C^3$ approach, to design a novel Low-Power Wide Area (LPWA) MAC protocol called \textit{Ctrl-MAC} and its associated event-triggered controller that can guarantee the closed-loop stability of a WA-CPS. This is the first paper to show that LPWA wireless communication technologies can support the control of WA-CPSs. LPWA technologies are designed to support one-way communication for monitoring and are not appropriate for control. We present this work using an example of a water distribution network application which we evaluate both through a co-simulator (modelling both physical and cyber subsystems) and testbed deployments. Our evaluation demonstrates full control stability, with up to $50$\% better packet delivery ratios and $80$\% less average end-to-end delays when compared to a state of the art LPWA technology. We also evaluate our scheme against an idealised, wired, centralised, control architecture and show that the controller maintains stability and the overshoots remain within bounds. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Comments: Accepted for publication at ACM Transactions on Cyber-Physical Systems

The Limits of LoRaWAN in Event-Triggered Wireless Networked Control Systems

Authors: Ivana Tomić, Laksh Bhatia, Michael J. Breza, Julie A. McCann

Abstract: Wireless sensors and actuators offer benefits to large industrial control systems. The absence of wires for communication reduces the deployment cost, maintenance effort, and provides greater flexibility for sensor and actuator location and system architecture. These benefits come at a cost of a high probability of communication delay or message loss due to the unreliability of radio-based communi… ▽ More Wireless sensors and actuators offer benefits to large industrial control systems. The absence of wires for communication reduces the deployment cost, maintenance effort, and provides greater flexibility for sensor and actuator location and system architecture. These benefits come at a cost of a high probability of communication delay or message loss due to the unreliability of radio-based communication. This unreliability poses a challenge to contemporary control systems that are designed with the assumption of instantaneous and reliable communication. Wireless sensors and actuators create a paradigm shift in engineering energy-efficient control schemes coupled with robust communication schemes that can maintain system stability in the face of unreliable communication. This paper investigates the feasibility of using the low-power wide-area communication protocol LoRaWAN with an event-triggered control scheme through modelling in Matlab. We show that LoRaWAN is capable of meeting the maximum delay and message loss requirements of an event-triggered controller for certain classes of applications. We also expose the limitation in the use of LoRaWAN when message size or communication range requirements increase or the underlying physical system is exposed to significant external disturbances. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: 6 pages, 5 figures, Accepted at 2018 UKACC 12th International Conference on Control (CONTROL)

The Separator, a Two-Phase Oil and Water Gravity CPS Separator Testbed

Authors: Michael Breza, Laksh Bhatia, Ivana Tomic, Anqi Fu, Waqas Ikram, Valentinos Kongezos, Julie A. McCann

Abstract: Industrial Control Systems (ICS) are evolving with advances in new technology. The addition of wireless sensors and actuators and new control techniques means that engineering practices from communication systems are being integrated into those used for control systems. The two are engineered in very different ways. Neither engineering approach is capable of accounting for the subtle interactions… ▽ More Industrial Control Systems (ICS) are evolving with advances in new technology. The addition of wireless sensors and actuators and new control techniques means that engineering practices from communication systems are being integrated into those used for control systems. The two are engineered in very different ways. Neither engineering approach is capable of accounting for the subtle interactions and interdependence that occur when the two are combined. This paper describes our first steps to bridge this gap, and push the boundaries of both computer communication system and control system design. We present The Separator testbed, a Cyber-Physical testbed enabling our search for a suitable way to engineer systems that combine both computer networks and control systems. △ Less

Submitted 1 February, 2020; originally announced February 2020.

Comments: 6 pages, 4 figures

XPC: Fast and Reliable Synchronous Transmission Protocols for 2-Phase Commit and 3-Phase Commit

Authors: Alberto Spina, Michael Breza, Naranker Dulay, Julie McCann

Abstract: One of the major challenges for the engineering of wireless sensing systems is to improve the software abstractions and frameworks that are available to programmers while ensuring system reliability and efficiency. The distributed systems community have developed a rich set of such abstractions for building dependable distributed systems connected using wired networks, however after 20 years resea… ▽ More One of the major challenges for the engineering of wireless sensing systems is to improve the software abstractions and frameworks that are available to programmers while ensuring system reliability and efficiency. The distributed systems community have developed a rich set of such abstractions for building dependable distributed systems connected using wired networks, however after 20 years research many of these elude wireless sensor systems. In this paper we present X Process Commit (XPC) an atomic commit protocol framework that utilizes Synchronous Transmission (ST). We also introduce Hybrid, a technique that allows us to exploit the advantages of the Glossy and Chaos Synchronous Transmission primitives to get lower latency and higher reliability than either. Using XPC and Hybrid we demonstrate how to build protocols for the classical 2-phase and 3-phase commit abstractions and evaluate these demonstrating significantly improved performance and reliability than the use of Glossy or Chaos individually as dissemination primitives. We address how we overcame the timing challenges of bringing Glossy and Chaos together to form Hybrid and through extensive experimentation demonstrate that it is robust to in-network radio interference caused by multiple sources. We are first to present testbed results that show that Hybrid can provide almost 100% reliability in a network of nodes suffering from various levels of radio interference. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 13 Pages

Antilizer: Run Time Self-Healing Security for Wireless Sensor Networks

Authors: Ivana Tomic, Po Yu Chen, Michael J. Breza, Julie A. McCann

Abstract: Wireless Sensor Network (WSN) applications range from domestic Internet of Things systems like temperature monitoring of homes to the monitoring and control of large-scale critical infrastructures. The greatest risk with the use of WSNs in critical infrastructure is their vulnerability to malicious network level attacks. Their radio communication network can be disrupted, causing them to lose or d… ▽ More Wireless Sensor Network (WSN) applications range from domestic Internet of Things systems like temperature monitoring of homes to the monitoring and control of large-scale critical infrastructures. The greatest risk with the use of WSNs in critical infrastructure is their vulnerability to malicious network level attacks. Their radio communication network can be disrupted, causing them to lose or delay data which will compromise system functionality. This paper presents Antilizer, a lightweight, fully-distributed solution to enable WSNs to detect and recover from common network level attack scenarios. In Antilizer each sensor node builds a self-referenced trust model of its neighbourhood using network overhearing. The node uses the trust model to autonomously adapt its communication decisions. In the case of a network attack, a node can make neighbour collaboration routing decisions to avoid affected regions of the network. Mobile agents further bound the damage caused by attacks. These agents enable a simple notification scheme which propagates collaborative decisions from the nodes to the base station. A filtering mechanism at the base station further validates the authenticity of the information shared by mobile agents. We evaluate Antilizer in simulation against several routing attacks. Our results show that Antilizer reduces data loss down to 1% (4% on average), with operational overheads of less than 1% and provides fast network-wide convergence. △ Less

Submitted 25 September, 2018; originally announced September 2018.