-
Development of Decision Support System for Effective COVID-19 Management
Authors:
shuvrangshu Jana,
Rudrashis Majumder,
Aashay Bhise,
Nobin Paul,
Stuti Garg,
Debasish Ghose
Abstract:
This paper discusses a Decision Support System (DSS) for cases prediction, allocation of resources, and lockdown management for managing COVID-19 at different levels of a government authority. Algorithms incorporated in the DSS are based on a data-driven modeling approach and independent of physical parameters of the region, and hence the proposed DSS is applicable to any area. Based on predicted…
▽ More
This paper discusses a Decision Support System (DSS) for cases prediction, allocation of resources, and lockdown management for managing COVID-19 at different levels of a government authority. Algorithms incorporated in the DSS are based on a data-driven modeling approach and independent of physical parameters of the region, and hence the proposed DSS is applicable to any area. Based on predicted active cases, the demand of lower-level units and total availability, allocation, and lockdown decision is made. A MATLAB-based GUI is developed based on the proposed DSS and could be implemented by the local authority.
△ Less
Submitted 12 March, 2022;
originally announced March 2022.
-
Autonomous Cooperative Multi-Vehicle System for Interception of Aerial and Stationary Targets in Unknown Environments
Authors:
Lima Agnel Tony,
Shuvrangshu Jana,
Varun V. P.,
Aashay Anil Bhise,
Aruul Mozhi Varman S.,
Vidyadhara B. V.,
Mohitvishnu S. Gadde,
Raghu Krishnapuram,
Debasish Ghose
Abstract:
This paper presents the design, development, and testing of hardware-software systems by the IISc-TCS team for Challenge 1 of the Mohammed Bin Zayed International Robotics Challenge 2020. The goal of Challenge 1 was to grab a ball suspended from a moving and maneuvering UAV and pop balloons anchored to the ground, using suitable manipulators. The important tasks carried out to address this challen…
▽ More
This paper presents the design, development, and testing of hardware-software systems by the IISc-TCS team for Challenge 1 of the Mohammed Bin Zayed International Robotics Challenge 2020. The goal of Challenge 1 was to grab a ball suspended from a moving and maneuvering UAV and pop balloons anchored to the ground, using suitable manipulators. The important tasks carried out to address this challenge include the design and development of a hardware system with efficient grabbing and pop** mechanisms, considering the restrictions in volume and payload, design of accurate target interception algorithms using visual information suitable for outdoor environments, and development of a software architecture for dynamic multi-agent aerial systems performing complex dynamic missions. In this paper, a single degree of freedom manipulator attached with an end-effector is designed for grabbing and pop**, and robust algorithms are developed for the interception of targets in an uncertain environment. Vision-based guidance and tracking laws are proposed based on the concept of pursuit engagement and artificial potential function. The software architecture presented in this work proposes an Operation Management System (OMS) architecture that allocates static and dynamic tasks collaboratively among multiple UAVs to perform any given mission. An important aspect of this work is that all the systems developed were designed to operate in completely autonomous mode. A detailed description of the architecture along with simulations of complete challenge in the Gazebo environment and field experiment results are also included in this work. The proposed hardware-software system is particularly useful for counter-UAV systems and can also be modified in order to cater to several other applications.
△ Less
Submitted 1 September, 2021;
originally announced September 2021.
-
Design and Integration of a Drone based Passive Manipulator for Capturing Flying Targets
Authors:
B. V. Vidyadhara,
Lima Agnel Tony,
Mohitvishnu S. Gadde,
Shuvrangshu Jana,
V. P. Varun,
Aashay Anil Bhise,
Suresh Sundaram,
Debasish Ghose
Abstract:
In this paper, we present a novel passive single Degree-of-Freedom (DoF) manipulator design and its integration on an autonomous drone to capture a moving target. The end-effector is designed to be passive, to disengage the moving target from a flying UAV and capture it efficiently in the presence of disturbances, with minimal energy usage. It is also designed to handle target sway and the effect…
▽ More
In this paper, we present a novel passive single Degree-of-Freedom (DoF) manipulator design and its integration on an autonomous drone to capture a moving target. The end-effector is designed to be passive, to disengage the moving target from a flying UAV and capture it efficiently in the presence of disturbances, with minimal energy usage. It is also designed to handle target sway and the effect of downwash. The passive manipulator is integrated with the drone through a single Degree of Freedom (DoF) arm, and experiments are carried out in an outdoor environment. The rack-and-pinion mechanism incorporated for this manipulator ensures safety by extending the manipulator beyond the body of the drone to capture the target. The autonomous capturing experiments are conducted using a red ball hanging from a stationary drone and subsequently from a moving drone. The experiments show that the manipulator captures the target with a success rate of 70\% even under environmental/measurement uncertainties and errors.
△ Less
Submitted 23 February, 2021;
originally announced February 2021.
-
Design Iterations for Passive Aerial Manipulator
Authors:
Vidyadhara B V,
Lima Agnel Tony,
Mohitvishnu S. Gadde,
Shuvrangshu Jana,
Varun V. P.,
Aashay Anil Bhise,
Suresh Sundaram,
Debasish Ghose
Abstract:
Grabbing a manoeuvring target using drones is a challenging problem. This paper presents the design, development, and prototy** of a novel aerial manipulator for target interception. It is a single Degree of Freedom (DoF) manipulator with passive basket-type end-effector. The proposed design is energy efficient, light weight and suitable for aerial grabbing applications. The detailed design of t…
▽ More
Grabbing a manoeuvring target using drones is a challenging problem. This paper presents the design, development, and prototy** of a novel aerial manipulator for target interception. It is a single Degree of Freedom (DoF) manipulator with passive basket-type end-effector. The proposed design is energy efficient, light weight and suitable for aerial grabbing applications. The detailed design of the proposed manipulation mechanism and a novel in-flight extending propeller guard, is reported in this paper.
△ Less
Submitted 16 February, 2021;
originally announced February 2021.
-
Target State Estimation and Prediction for High Speed Interception
Authors:
Aashay Bhise,
Shuvrangshu Jana,
Lima Agnel Tony,
Debasish Ghose
Abstract:
Accurate estimation and prediction of trajectory is essential for interception of any high speed target. In this paper, an extended Kalman filter is used to estimate the current location of target from its visual information and then predict its future position by using the observation sequence. Target motion model is developed considering the approximate known pattern of the target trajectory. In…
▽ More
Accurate estimation and prediction of trajectory is essential for interception of any high speed target. In this paper, an extended Kalman filter is used to estimate the current location of target from its visual information and then predict its future position by using the observation sequence. Target motion model is developed considering the approximate known pattern of the target trajectory. In this work, we utilise visual information of the target to carry out the predictions. The proposed algorithm is developed in ROS-Gazebo environment and is verified using hardware implementation.
△ Less
Submitted 4 October, 2020;
originally announced October 2020.
-
Vision based Target Interception using Aerial Manipulation
Authors:
Lima Agnel Tony,
Shuvrangshu Jana,
Aashay Bhise,
Varun V P,
Aruul Mozhi Varman S,
Vidyadhara B V,
Mohitvishnu S Gadde,
Debasish Ghose,
Raghu Krishnapuram
Abstract:
Selective interception of objects in unknown environment autonomously by UAVs is an interesting problem. In this work, vision based interception is carried out. This problem is a part of challenge 1 of Mohammed Bin Zayed International Robotic Challenge, 2020, where, balloons are kept at five random locations for the UAVs to autonomously explore, detect, approach and intercept. The problem requires…
▽ More
Selective interception of objects in unknown environment autonomously by UAVs is an interesting problem. In this work, vision based interception is carried out. This problem is a part of challenge 1 of Mohammed Bin Zayed International Robotic Challenge, 2020, where, balloons are kept at five random locations for the UAVs to autonomously explore, detect, approach and intercept. The problem requires a different formulation to execute compared to the normal interception problems in literature. This work details the different aspect of this problem from vision to manipulator design. The frame work is implemented on hardware using Robot Operating System (ROS) communication architecture.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Accurate Prediction and Estimation of 3D-Repetitive-Trajectories using Kalman Filter, Machine Learning and Curve-Fitting Method
Authors:
Aakriti Agrawal,
Aashay Bhise,
Rohitkumar Arasanipalai,
Lima Agnel Tony,
Shuvrangshu Jana,
Debasish Ghose
Abstract:
Accurate estimation and prediction of trajectory is essential for the capture of any high speed target. In this paper, an extended Kalman filter (EKF) is used to track the target in the first loop of the trajectory to collect data points and then a combination of machine learning with least-square curve-fitting is used to accurately estimate future positions for the subsequent loops. The EKF estim…
▽ More
Accurate estimation and prediction of trajectory is essential for the capture of any high speed target. In this paper, an extended Kalman filter (EKF) is used to track the target in the first loop of the trajectory to collect data points and then a combination of machine learning with least-square curve-fitting is used to accurately estimate future positions for the subsequent loops. The EKF estimates the current location of target from its visual information and then predicts its future position by using the observation sequence. We utilize noisy visual information of the target from the three dimensional trajectory to carry out the predictions. The proposed algorithm is developed in ROS-Gazebo environment and is implemented on hardware.
△ Less
Submitted 31 August, 2020;
originally announced September 2020.
-
Low Cost Autonomous Navigation and Control of a Mechanically Balanced Bicycle with Dual Locomotion Mode
Authors:
Ayush Pandey,
Subhamoy Mahajan,
Adarsh Kosta,
Dhananjay Yadav,
Vikas Pandey,
Saurav Sahay,
Siddharth Jha,
Shubh Agarwal,
Aashay Bhise,
Raushan Kumar,
Aniket Bhushan,
Vraj Parikh,
Ankit Lohani,
Saurabh Dash,
Himanshu Choudhary,
Rahul Kumar,
Anurag Sharma,
Arnab Mondal,
Chendika Karthik Sai,
P N Vamshi
Abstract:
On the lines of the huge and varied efforts in the field of automation with respect to technology development and innovation of vehicles to make them run autonomously, this paper presents an innovation to a bicycle. A normal daily use bicycle was modified at low cost such that it runs autonomously, while maintaining its original form i.e. the manual drive. Hence, a bicycle which could be normally…
▽ More
On the lines of the huge and varied efforts in the field of automation with respect to technology development and innovation of vehicles to make them run autonomously, this paper presents an innovation to a bicycle. A normal daily use bicycle was modified at low cost such that it runs autonomously, while maintaining its original form i.e. the manual drive. Hence, a bicycle which could be normally driven by any human and with a press of switch could run autonomously according to the needs of the user has been developed.
△ Less
Submitted 1 November, 2016;
originally announced November 2016.