-
Optical Stochastic Computing Architectures Using Photonic Crystal Nanocavities
Authors:
Hassnaa El-Derhalli,
Lea Constans,
Sebastien Le Beux,
Alfredo De Rossi,
Fabrice Raineri,
Sofiene Tahar
Abstract:
Stochastic computing allows a drastic reduction in hardware complexity using serial processing of bit streams. While the induced high computing latency can be overcome using integrated optics technology, the design of realistic optical stochastic computing architectures calls for energy efficient switching devices. Photonics Crystal (PhC) nanocavities are $μm^2$ scale devices offering 100fJ switch…
▽ More
Stochastic computing allows a drastic reduction in hardware complexity using serial processing of bit streams. While the induced high computing latency can be overcome using integrated optics technology, the design of realistic optical stochastic computing architectures calls for energy efficient switching devices. Photonics Crystal (PhC) nanocavities are $μm^2$ scale devices offering 100fJ switching operation under picoseconds-scale switching speed. Fabrication process allows controlling the Quality factor of each nanocavity resonance, leading to opportunities to implement architectures involving cascaded gates and multi-wavelength signaling. In this report, we investigate the design of cascaded gates architecture using nanocavities in the context of stochastic computing. We propose a transmission model considering key nanocavity device parameters, such as Quality factors, resonance wavelength and switching efficiency. The model is calibrated with experimental measurements. We propose the design of XOR gate and multiplexer. We illustrate the use of the gates to design an edge detection filter. System-level exploration of laser power, bit-stream length and bit-error rate is carried out for the processing of gray-scale images. The results show that the proposed architecture leads to 8.5nJ/pixel energy consumption and 512ns/pixel processing time.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
3D logic cells design and results based on Vertical NWFET technology including tied compact model
Authors:
C. Mukherjee,
M. Deng,
F. Marc,
C. Maneux,
A. Poittevin,
I. OConnor,
S. Le Beux,
A. Kumar,
A. Lecestre,
G. Larrieu
Abstract:
Gate-all-around Vertical Nanowire Field Effect Transistors (VNWFET) are emerging devices, which are well suited to pursue scaling beyond lateral scaling limitations around 7nm. This work explores the relative merits and drawbacks of the technology in the context of logic cell design. We describe a junctionless nanowire technology and associated compact model, which accurately describes fabricated…
▽ More
Gate-all-around Vertical Nanowire Field Effect Transistors (VNWFET) are emerging devices, which are well suited to pursue scaling beyond lateral scaling limitations around 7nm. This work explores the relative merits and drawbacks of the technology in the context of logic cell design. We describe a junctionless nanowire technology and associated compact model, which accurately describes fabricated device behavior in all regions of operations for transistors based on between 16 and 625 parallel nanowires of diameters between 22 and 50nm. We used this model to simulate the projected performance of inverter logic gates based on passive load, active load and complementary topologies and carry out an performance exploration for the number of nanowires in transistors. In terms of compactness, through a dedicated full 3D layout design, we also demonstrate a 1.4x reduction in lateral dimensions for the complementary structure with respect to 7nm FinFET-based inverters.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Stochastic Computing with Integrated Optics
Authors:
Hassnaa El-Derhalli,
Sébastien Le Beux,
Sofiene Tahar
Abstract:
Stochastic computing (SC) allows reducing hardware complexity and improving energy efficiency of error resilient applications. However, a main limitation of the computing paradigm is the low throughput induced by the intrinsic serial computing of bit-streams. In this paper, we address the implementation of SC in the optical domain, with the aim to improve the computation speed. We implement a gene…
▽ More
Stochastic computing (SC) allows reducing hardware complexity and improving energy efficiency of error resilient applications. However, a main limitation of the computing paradigm is the low throughput induced by the intrinsic serial computing of bit-streams. In this paper, we address the implementation of SC in the optical domain, with the aim to improve the computation speed. We implement a generic optical architecture allowing the execution of polynomial functions. We propose design methods to explore the design space in order to optimize key metrics such as circuit robustness and power consumption. We show that a circuit implementing a 2 nd order polynomial degree function and operating at 1Ghz leads to 20.1pJ laser consumption per computed bit.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Energy-efficient optical crossbars on chip with multi-layer deposited silicon
Authors:
Hui Li,
Sébastien Le Beux,
Gabriela Nicolescu,
Ian O 'Connor
Abstract:
The many cores design research community have shown high interest in optical crossbars on chip for more than a decade. Key properties of optical crossbars, namely a) contention-free data routing b) low-latency communication and c) potential for high bandwidth through the use of WDM, motivate several implementations. These implementations demonstrate very different scalability and power efficiency…
▽ More
The many cores design research community have shown high interest in optical crossbars on chip for more than a decade. Key properties of optical crossbars, namely a) contention-free data routing b) low-latency communication and c) potential for high bandwidth through the use of WDM, motivate several implementations. These implementations demonstrate very different scalability and power efficiency ability depending on three key design factors: a) the network topology, b) the considered layout and c) the insertion losses induced by the fabrication process. The emerging design technique relying on multi-layer deposited silicon allows reducing optical losses, which may lead to significant reduction of the power consumption. In this paper, multi-layer deposited silicon based crossbars are proposed and compared. The results indicate that the proposed ring-based network exhibits, on average, 22% and 51.4% improvement for worst-case and average losses respectively compared to the most power-efficient related crossbars.
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
-
Optical Crossbars on Chip: a comparative study based on worst-case losses
Authors:
Hui Li,
Sébastien Le Beux,
Gabriela Nicolescu,
Jelena Trajkovic,
Ian O 'Connor
Abstract:
The many cores design research community have shown high interest in optical crossbars on chip for more than a decade. Key properties of optical crossbars, namely a) contention free data routing b) low latency communication and c) potential for high bandwidth through the use of WDM, motivate several implementations of this type of interconnect. These implementations demonstrate very different scal…
▽ More
The many cores design research community have shown high interest in optical crossbars on chip for more than a decade. Key properties of optical crossbars, namely a) contention free data routing b) low latency communication and c) potential for high bandwidth through the use of WDM, motivate several implementations of this type of interconnect. These implementations demonstrate very different scalability and power efficiency ability depending on three key design factors: a) the network topology, b) the considered layout and the c) the injection losses induced by the fabrication process. In this paper, the worst-case optical losses of crossbar implementations are compared according to the factors mentioned above. The comparison results has the potential to help many cores system designer to select the most appropriate crossbar implementation according, for instance, to the number of IP cores and the chip die size.
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
-
Thermal Aware Design Method for VCSEL-Based On-Chip Optical Interconnect
Authors:
Hui Li,
Alain Fourmigue,
Sébastien Le Beux,
Xavier Letartre,
Ian O 'Connor,
Gabriela Nicolescu
Abstract:
Optical Network-on-Chip (ONoC) is an emerging technology considered as one of the key solutions for future generation on-chip interconnects. However, silicon photonic devices in ONoC are highly sensitive to temperature variation, which leads to a lower efficiency of Vertical-Cavity Surface-Emitting Lasers (VCSELs), a resonant wavelength shift of Microring Resonators (MR), and results in a lower Si…
▽ More
Optical Network-on-Chip (ONoC) is an emerging technology considered as one of the key solutions for future generation on-chip interconnects. However, silicon photonic devices in ONoC are highly sensitive to temperature variation, which leads to a lower efficiency of Vertical-Cavity Surface-Emitting Lasers (VCSELs), a resonant wavelength shift of Microring Resonators (MR), and results in a lower Signal to Noise Ratio (SNR). In this paper, we propose a methodology enabling thermal-aware design for optical interconnects relying on CMOS-compatible VCSEL. Thermal simulations allow designing ONoC interfaces with low gradient temperature and analytical models allow evaluating the SNR.
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
