-
Low-latency Symbol-Synchronous Communication for Multi-hop Sensor Networks
Authors:
Xinlei Liu,
Andrey Belogaev,
Jonathan Oostvogels,
Bingwu Fang,
Danny Hughes,
Maarten Weyn,
Jeroen Famaey
Abstract:
Wireless sensor networks (WSNs) have received great interest due to their scalability, energy efficiency, and low-cost deployment. By utilizing multi-hop communication, WSNs can cover a wide area using low transmission power without the need for any communication infrastructure. Traditionally, WSNs rely on store-and-forward routing protocols and Time Division Multiple Access (TDMA)-based schedules…
▽ More
Wireless sensor networks (WSNs) have received great interest due to their scalability, energy efficiency, and low-cost deployment. By utilizing multi-hop communication, WSNs can cover a wide area using low transmission power without the need for any communication infrastructure. Traditionally, WSNs rely on store-and-forward routing protocols and Time Division Multiple Access (TDMA)-based schedules that avoid interference between different wireless nodes. However, emerging challenging scenarios, such as the industrial Internet of Things (IoT) and robotic swarms, impose strict latency and reliability requirements, which traditional approaches cannot fulfill. In this paper, we propose a novel symbol-synchronous transmission design that provides reliable low-latency communication with a reasonable data rate on classical sub-6GHz RF frequency bands (e.g., the 2.4GHz ISM band). Instead of avoiding overlap** transmissions, the proposed scheme benefits from concurrent transmissions. Using simulation in MATLAB, we prove that the proposed design allows achieving a wire-like delay of 5ms for a 512-bit packet over multiple hops with only a 0.3% latency increase per extra hop and a low bit error rate (BER) of 0.04%. Compared to similar state-of-the-art approaches it can achieve a significantly higher data rate of 100kbps, which is expected to increase further with future improvements of the system.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Dedicated Restricted Target Wake Time for Real-Time Applications in Wi-Fi 7
Authors:
Andrey Belogaev,
Xiaoman Shen,
Chun Pan,
Xingfeng Jiang,
Chris Blondia,
Jeroen Famaey
Abstract:
Real-time applications (RTA) tend to play a crucial role in people's everyday life. Such applications are among the key use cases for the next generations of wireless technologies. RTA applications are characterized by strict guaranteed delay requirements (in the order of a few milliseconds). One of the pillars of enabling RTA in next-generation Wi-Fi standards is Restricted Target Wake Time (R-TW…
▽ More
Real-time applications (RTA) tend to play a crucial role in people's everyday life. Such applications are among the key use cases for the next generations of wireless technologies. RTA applications are characterized by strict guaranteed delay requirements (in the order of a few milliseconds). One of the pillars of enabling RTA in next-generation Wi-Fi standards is Restricted Target Wake Time (R-TWT), which provides Wi-Fi stations exclusive channel access within negotiated service periods (SPs). If each RTA data flow uses dedicated SPs for data transmission, they are completely isolated from each other and do not experience any contention. To ensure the satisfaction of RTA QoS requirements while minimizing the channel airtime consumption, it is important to properly select the R-TWT parameters, namely the duration of SPs and the period between SPs. In this paper, we develop a mathematical model that estimates the delay probability distribution and packet loss probability for a given set of network, traffic and R-TWT parameters. Using this model, the access point can select the optimal R-TWT parameters for the given QoS requirements. The high accuracy of the model is proven by means of simulation.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Adaptive Transmission Parameters Selection Algorithm for URLLC Traffic in Uplink
Authors:
Aleksei Shahsin,
Andrey Belogaev,
Artem Krasilov,
Evgeny Khorov
Abstract:
Ultra-Reliable Low-Latency Communications (URLLC) is a novel feature of 5G cellular systems. To satisfy strict URLLC requirements for uplink data transmission, the specifications of 5G systems introduce the grant-free channel access method. According to this method, a User Equipment (UE) performs packet transmission without requesting channel resources from a base station (gNB). With the grant-fre…
▽ More
Ultra-Reliable Low-Latency Communications (URLLC) is a novel feature of 5G cellular systems. To satisfy strict URLLC requirements for uplink data transmission, the specifications of 5G systems introduce the grant-free channel access method. According to this method, a User Equipment (UE) performs packet transmission without requesting channel resources from a base station (gNB). With the grant-free channel access, the gNB configures the uplink transmission parameters in a long-term time scale. Since the channel quality can significantly change in time and frequency domains, the gNB should select robust transmission parameters to satisfy the URLLC requirements. Many existing studies consider fixed robust uplink transmission parameter selection that allows satisfying the requirements even for UEs with poor channel conditions. However, the more robust transmission parameters are selected, the lower is the network capacity. In this paper, we propose an adaptive algorithm that selects the transmission parameters depending on the channel quality based on the signal-to-noise ratio statistics analysis at the gNB. Simulation results obtained with NS-3 show that the algorithm allows meeting the URLLC latency and reliability requirements while reducing the channel resource consumption more than twice in comparison with the fixed transmission parameters selection.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
Analytical Study of Incremental Approach for Information Dissemination in Wireless Networks
Authors:
Andrey Belogaev,
Evgeny Khorov,
Artem Krasilon,
Andrey Lyakhov
Abstract:
In many scenarios, control information dissemination becomes a bottleneck, which limits the scalability and the performance of wireless networks. Such a problem is especially crucial in mobile ad hoc networks, dense networks, networks of vehicles and drones, sensor networks. In other words, this problem occurs in any scenario with frequent changes in topology or interference level on one side and…
▽ More
In many scenarios, control information dissemination becomes a bottleneck, which limits the scalability and the performance of wireless networks. Such a problem is especially crucial in mobile ad hoc networks, dense networks, networks of vehicles and drones, sensor networks. In other words, this problem occurs in any scenario with frequent changes in topology or interference level on one side and with strong requirements on delay, reliability, power consumption, or capacity on the other side. If the control information changes partially, it may be worth sending only differential updates instead of messages containing full information to reduce overhead. However, such an approach needs accurate tuning of dissemination parameters, since it is necessary to guarantee information relevance in error-prone wireless networks. In the paper, we provide a deep study of two approaches for generating differential updates - namely, incremental and cumulative - and compare their efficiency. We show that the incremental approach allows significantly reducing the amount of generated control information compared to the cumulative one, while providing the same level of information relevance. We develop an analytical model for the incremental approach and propose an algorithm which allows tuning its parameters, depending on the number of nodes in the network, their mobility, and wireless channel quality. Using the developed analytical model, we show that the incremental approach is very useful for static dense network deployments and networks with low and medium mobility, since it allows us to significantly reduce the amount of control information compared to the classical full dump approach.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Conservative Link Adaptation for Ultra Reliable Low Latency Communications
Authors:
Andrey Belogaev,
Evgeny Khorov,
Artem Krasilov,
Dmitri Shmelkin,
Suwen Tang
Abstract:
Ultra reliable low latency communications (URLLC) is one of the most promising and demanding services in 5G systems. This service requires very low latency of less than $1-10$ ms and very high transmission reliability: the acceptable packet loss ratio is about $10^{-5}$. To satisfy such strict requirements, many issues shall be solved. This paper focuses on the link adaptation problem, i.e., the s…
▽ More
Ultra reliable low latency communications (URLLC) is one of the most promising and demanding services in 5G systems. This service requires very low latency of less than $1-10$ ms and very high transmission reliability: the acceptable packet loss ratio is about $10^{-5}$. To satisfy such strict requirements, many issues shall be solved. This paper focuses on the link adaptation problem, i.e., the selection of a modulation and coding scheme (MCS) for transmission based on the received channel quality indicator (CQI) reports. On the one hand, link adaptation should select a robust MCS to provide high reliability. On the other hand, it should select the highest possible MCS to reduce channel resource consumption. The paper shows that even for one URLLC user, link adaptation is still a challenging problem, especially in highly-variant channels. To solve this problem, a conservative link adaptation algorithm is designed. The algorithm estimates the strongest channel degradation at the time moment of the actual packet transmission and selects an MCS taking into account the worst degradation. The obtained results show that the proposed algorithm is efficient in terms of both the packet loss ratio and the channel resource consumption.
△ Less
Submitted 6 August, 2019;
originally announced August 2019.