-
Optimization paper production through digitalization by develo** an assistance system for machine operators including quality forecast: a concept
Authors:
Moritz Schroth,
Felix Hake,
Konstantin Merker,
Alexander Becher,
Tilman Klaeger,
Robin Huesmann,
Detlef Eichhorn,
Lukas Oehm
Abstract:
Nowadays cross-industry ranging challenges include the reduction of greenhouse gas emission and enabling a circular economy. However, the production of paper from waste paper is still a highly resource intensive task, especially in terms of energy consumption. While paper machines produce a lot of data, we have identified a lack of utilization of it and implement a concept using an operator assist…
▽ More
Nowadays cross-industry ranging challenges include the reduction of greenhouse gas emission and enabling a circular economy. However, the production of paper from waste paper is still a highly resource intensive task, especially in terms of energy consumption. While paper machines produce a lot of data, we have identified a lack of utilization of it and implement a concept using an operator assistance system and state-of-the-art machine learning techniques, e.g., classification, forecasting and alarm flood handling algorithms, to support daily operator tasks. Our main objective is to provide situation-specific knowledge to machine operators utilizing available data. We expect this will result in better adjusted parameters and therefore a lower footprint of the paper machines.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Real-Time Waveform Matching with a Digitizer at 10 GS/s
Authors:
Jens Trautmann,
Nikolaos Patsiatzis,
Andreas Becher,
Jürgen Teich,
Stefan Wildermann
Abstract:
Side-Channel Analysis (SCA) requires the detection of the specific time frame Cryptographic Operations (COs) takeplace in the side-channel signal. In laboratory conditions with full control over the Device under Test (DuT), dedicated trigger signals can be implemented to indicate the start and end of COs. For real-world scenarios, waveform-matching techniques have been established which compare th…
▽ More
Side-Channel Analysis (SCA) requires the detection of the specific time frame Cryptographic Operations (COs) takeplace in the side-channel signal. In laboratory conditions with full control over the Device under Test (DuT), dedicated trigger signals can be implemented to indicate the start and end of COs. For real-world scenarios, waveform-matching techniques have been established which compare the side-channel signal with a template of the CO's pattern in real time to detect the CO in the side channel. State-of-the-art approaches are implemented on Field-Programmable Gate Arrays (FPGAs). However, current waveform-matching designs are processing the samples from Analog-to-Digital Converters (ADCs) sequentially and can only work with low sampling rates due to the limited clock speed of FPGAs. This makes it increasingly difficult to apply existing techniques on modern DuTs that are operating with clock speeds in the GHz range. In this paper, we present a parallel waveform-matching architecture that is capable of performing waveform matching at the speed of fast ADCs. We implement the proposed architecture in a high-end FPGA-based digitizer and apply it to detect AES COs from the side channel of a single-board computer operating at 1 GHz. Our implementation allows for waveform matching at 10 GS/s with high accuracy, thus offering a speedup of 50x compared to the fastest state-of-the-art implementation known to us.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Raw Filtering of JSON Data on FPGAs
Authors:
Tobias Hahn,
Andreas Becher,
Stefan Wildermann,
Jürgen Teich
Abstract:
Many Big Data applications include the processing of data streams on semi-structured data formats such as JSON. A disadvantage of such formats is that an application may spend a significant amount of processing time just on unselectively parsing all data. To relax this issue, the concept of raw filtering is proposed with the idea to remove data from a stream prior to the costly parsing stage. Howe…
▽ More
Many Big Data applications include the processing of data streams on semi-structured data formats such as JSON. A disadvantage of such formats is that an application may spend a significant amount of processing time just on unselectively parsing all data. To relax this issue, the concept of raw filtering is proposed with the idea to remove data from a stream prior to the costly parsing stage. However, as accurate filtering of raw data is often only possible after the data has been parsed, raw filters are designed to be approximate in the sense of allowing false-positives in order to be implemented efficiently.
Contrary to previously proposed CPU-based raw filtering techniques that are restricted to string matching, we present FPGA-based primitives for filtering strings, numbers and also number ranges. In addition, a primitive respecting the basic structure of JSON data is proposed that can be used to further increase the accuracy of introduced raw filters.
The proposed raw filter primitives are designed to allow for their composition according to a given filter expression of a query. Thus, complex raw filters can be created for FPGAs which enable a drastical decrease in the amount of generated false-positives, particularly for IoT workload.
As there exists a trade-off between accuracy and resource consumption, we evaluate primitives as well as composed raw filters using different queries from the RiotBench benchmark. Our results show that up to 94.3% of the raw data can be filtered without producing any observed false-positives using only a few hundred LUTs.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
On the Approximation of Accuracy-configurable Sequential Multipliers via Segmented Carry Chains
Authors:
Jorge Echavarria,
Stefan Wildermann,
Oliver Keszocze,
Faramarz Khosravi,
Andreas Becher,
Jürgen Teich
Abstract:
In this paper, we present a multiplier based on a sequence of approximated accumulations. According to a given splitting point of the carry chains, the technique herein introduced allows varying the quality of the accumulations and, consequently, the overall product. Our approximate multiplier trades-off accuracy for a reduced latency (with respect to an accurate sequential multiplier) and exploit…
▽ More
In this paper, we present a multiplier based on a sequence of approximated accumulations. According to a given splitting point of the carry chains, the technique herein introduced allows varying the quality of the accumulations and, consequently, the overall product. Our approximate multiplier trades-off accuracy for a reduced latency (with respect to an accurate sequential multiplier) and exploits the inherent area savings of sequential over combinatorial approaches. We implemented multiple versions with different bit-width and accuracy configurations, targeting an FPGA and a 45nm ASIC to estimate resources, power consumption, and latency. We also present two error analyses of the proposed design based on closed-form analysis and simulations.
△ Less
Submitted 25 May, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
The ReProVide Query-Sequence Optimization in a Hardware-Accelerated DBMS
Authors:
Lekshmi B. G.,
Andreas Becher,
Klaus Meyer-Wegener
Abstract:
Hardware acceleration of database query processing can be done with the help of FPGAs. In particular, they are partially reconfigurable at runtime, which allows for the runtime adaption of the hardware to a variety of queries. Reconfiguration itself, however, takes some time. As the affected area of the FPGA is not available for computations during the reconfiguration, avoiding some of the reconfi…
▽ More
Hardware acceleration of database query processing can be done with the help of FPGAs. In particular, they are partially reconfigurable at runtime, which allows for the runtime adaption of the hardware to a variety of queries. Reconfiguration itself, however, takes some time. As the affected area of the FPGA is not available for computations during the reconfiguration, avoiding some of the reconfigurations can improve overall performance. This paper presents optimizations based on query sequences, which reduces the impact of the reconfigurations. Knowledge of upcoming queries is used to (I) speculatively start reconfiguration already when a query is still running and (II) avoid overwriting of reconfigurable regions that will be used again in subsequent queries. We evaluate our optimizations with a calibrated model and measurements for various parameter values. Improvements in execution time of up to 28% can be obtained even with sequences of only two queries.
△ Less
Submitted 1 May, 2020;
originally announced May 2020.
-
Secure Boot from Non-Volatile Memory for Programmable SoC Architectures
Authors:
Franz-Josef Streit,
Florian Fritz,
Andreas Becher,
Stefan Wildermann,
Stefan Werner,
Martin Schmidt-Korth,
Michael Pschyklenk,
Jürgen Teich
Abstract:
In modern embedded systems, the trust in comprehensive security standards all along the product life cycle has become an increasingly important access-to-market requirement. However, these security standards rely on mandatory immunity assumptions such as the integrity and authenticity of an initial system configuration typically loaded from Non-Volatile Memory (NVM). This applies especially to FPG…
▽ More
In modern embedded systems, the trust in comprehensive security standards all along the product life cycle has become an increasingly important access-to-market requirement. However, these security standards rely on mandatory immunity assumptions such as the integrity and authenticity of an initial system configuration typically loaded from Non-Volatile Memory (NVM). This applies especially to FPGA-based Programmable System-on-Chip (PSoC) architectures, since object codes as well as configuration data easily exceed the capacity of a secure bootROM. In this context, an attacker could try to alter the content of the NVM device in order to manipulate the system. The PSoC therefore relies on the integrity of the NVM particularly at boot-time. In this paper, we propose a methodology for securely booting from an NVM in a potentially unsecure environment by exploiting the reconfigurable logic of the FPGA. Here, the FPGA serves as a secure anchor point by performing required integrity and authenticity verifications prior to the configuration and execution of any user application loaded from the NVM on the PSoC. The proposed secure boot process is based on the following assumptions and steps: 1) The boot configurationis stored on a fully encrypted Secure Digital memory card (SD card) or alternatively Flash acting as NVM. 2) At boot time, a hardware design called Trusted Memory-Interface Unit (TMIU) is loaded to verify first the authenticity of the deployed NVM and then after decryption the integrity of its content. To demonstrate the practicability of our approach, we integrated the methodology into the vendor-specific secure boot process of a Xilinx Zynq PSoC and evaluated the design objectives performance, power and resource costs.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Query-Sequence Optimization on a Reconfigurable Hardware-Accelerated System
Authors:
Lekshmi B. G.,
Andreas Becher,
Klaus Meyer-Wegener
Abstract:
Hardware acceleration of database query processing can be done with the help of FPGAs. In particular, they are partially reconfigurable during runtime, which allows for the runtime adaption of the hardware to a variety of queries. Reconfiguration itself, however, takes some time. As the affected area of the FPGA is not available for computations during the reconfiguration, avoiding some of the rec…
▽ More
Hardware acceleration of database query processing can be done with the help of FPGAs. In particular, they are partially reconfigurable during runtime, which allows for the runtime adaption of the hardware to a variety of queries. Reconfiguration itself, however, takes some time. As the affected area of the FPGA is not available for computations during the reconfiguration, avoiding some of the reconfigurations can improve overall performance. This paper presents optimizations based on query sequences, which reduces the impact of the reconfigurations. Knowledge of coming queries is used to (I) speculatively start reconfiguration already when a query is still running and (II) avoid overwriting of reconfigurable regions that will be used again in subsequent queries. We evaluate our optimizations with a calibrated model and measurements for various parameter values. Improvements in execution time of up to 21% can be obtained even with sequences of only two queries
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
Novel Approach to Measure Motion-To-Photon and Mouth-To-Ear Latency in Distributed Virtual Reality Systems
Authors:
Armin Becher,
Jens Angerer,
Thomas Grauschopf
Abstract:
Distributed Virtual Reality systems enable globally dispersed users to interact with each other in a shared virtual environment. In such systems, different types of latencies occur. For a good VR experience, they need to be controlled. The time delay between the user's head motion and the corresponding display output of the VR system might lead to adverse effects such as a reduced sense of presenc…
▽ More
Distributed Virtual Reality systems enable globally dispersed users to interact with each other in a shared virtual environment. In such systems, different types of latencies occur. For a good VR experience, they need to be controlled. The time delay between the user's head motion and the corresponding display output of the VR system might lead to adverse effects such as a reduced sense of presence or motion sickness. Additionally, high network latency among worldwide locations makes collaboration between users more difficult and leads to misunderstandings. To evaluate the performance and optimize dispersed VR solutions it is therefore important to measure those delays. In this work, a novel, easy to set up, and inexpensive method to measure local and remote system latency will be described. The measuring setup consists of a microcontroller, a microphone, a piezo buzzer, a photosensor, and a potentiometer. With these components, it is possible to measure motion-to-photon and mouth-to-ear latency of various VR systems. By using GPS-receivers for timecode-synchronization it is also possible to obtain the end-to-end delays between different worldwide locations. The described system was used to measure local and remote latencies of two HMD based distributed VR systems.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
